Centricut plasma torches and consumables for Whitney
|
|
- Todd Holland
- 8 years ago
- Views:
Transcription
1 plasma torches and consumables for Whitney
2 Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY WIEDEMANN HT, MAX, Hypertherm and are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners.
3 OW250 OEM Whitney System OW250 Consumables 1 C Nose piece 1 2 C Nozzle, Air, 063, 150 amp 5 C S Nozzle, Air, C N/A Nozzle, Air, C Electrode, low amp, Air, 150 amp 5 C Electrode, Air, with o-ring C14-010, 250 amp 5 C Electrode, Air, without o-ring, 250 amp 5 Maintenance items 4 C Cooling tube 1 5 C Nozzle holder 1 6 C Gasket spacers 2 7 C Gas guide ring 1 8 C Lower gasket 5 9 C Insulating spacer 1 10 C Middle gasket 5 C Hole guides 5 C N/A O-ring 5 C O-ring 5 C O-ring 5 C O-ring seal N/A Lubricant.25 oz. (7 ml) tube is a registered trademark of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with Whitney. 43 Plasma
4 IC300 OEM Whitney System IC Consumables 1 C Nose piece 1 2 C Nozzle, Air,.063, 150 amp 5 C S Nozzle, Air, C N/A Nozzle, Air, C Electrode, low amp, Air, 150 amp 5 C Electrode, Air, with o-ring C14-010, 250 amp 5 C Electrode, Air, without o-ring, 250 amp * Maintenance items 4 C Cooling tube 1 5 C Nozzle holder 1 6 C Gasket spacers 2 7 C Gas guide ring 1 8 C Lower gasket 5 9 C Insulating spacer 1 10 C Middle gasket 5 C Hole guides 5 12 C Manifold 1 C O-ring seal 4 13 C Upper body 1 C High frequency socket 1 C High frequency pin 1 14 C Head cover assembly 1 C Torch tube cover 1 C IC300 one touch torch 1 15 C14-8* N/A Lower body assembly (includes items 4 12) 1 C N/A O-ring 5 C O-ring 5 C O-ring N/A Lubricant.25 oz. (7 ml) tube 1 * part features a unique Hypertherm design that differs from the OEM design is a registered trademark of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with Whitney. 44 Plasma
5 IC100 OEM Whitney System TRUECUT 9* 8 7* 5* 6 4* 3 Consumables Shield, machine, Air, O 2, N 2, 200 amp 1 C32-924* N/A Shield, machine, Air, O 2, N 2, 200 amp Shield, Air, N 2, ArH 2, 100 amp Shield, machine, Air, 40 amp Retaining cap 1 4 C Nozzle, Air,.086, N 2, ArH 2, 200 amp 1 C32-6* Nozzle, Air,.059, N 2, ArH 2, 100 amp 1 C32-689* Nozzle, Air,.038, 40 amp 5 C Nozzle, O 2,.082, 200 amp 1 C Nozzle, O 2,.055, 100 amp 1 5 C32-907* N/A Swirl ring, Air, N 2, ArH 2, 100/200 amp Swirl ring, Air, 40 amp, and O 2, 100 amp Swirl ring, Air, 200 amp Swirl ring, O 2, 200 amp 1 7 C32-664* Electrode, O 2, 200 amp 1 C * SilverLine electrode, O 2, 200 amp 1 C Electrode, N 2, ArH 2 5 C Electrode, Air, O 2, 100 amp 5 Maintenance items Torch body, C O-ring Water tube 1 9 C32-431* N/A Double threaded mounting tube N/A Lubricant.25 oz. (7 ml) tube 1 * part features a unique Hypertherm design that differs from the OEM design. 1* 2 and SilverLine are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. is in no way affiliated with Whitney. 45 Plasma
6 Technology products for ESAB, Kjellberg and Kaliburn Hypertherm, Inc. Hanover, NH USA Tel Hypertherm (S) Pte Ltd. Singapore Tel Hypertherm (Shanghai) Trading Co., Ltd. PR China /1 Tel Hypertherm Europe B.V SE Roosendaal, Nederland Tel Hypertherm Brasil Ltda. Guarulhos, SP - Brasil Tel Hypertherm and are registered trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries. All other trademarks are the properties of their respective owners. 3/20 Hypertherm, Inc. Rev 2
Centricut plasma torches and consumables for ESAB
plasma torches and consumables for ESAB Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY WIEDEMANN HT,
More informationCO 2 laser consumables Laser Lab
CO 2 laser consumables Laser Lab Contents Laser Our value proposition Product breadth with over 2,800 s OEM quality/consistency for nozzles, ceramics and optics Technical/application support from OEM-trained
More informationCO 2 laser consumables Haas
CO 2 laser consumables Haas Contents Laser Our value proposition Product breadth with over 2,800 part numbers OEM quality/consistency for nozzles, ceramics and optics Technical/application support from
More informationTORCH SYSTEM PAGE PT-15 /PT-15XL PCM-8,ESP-300,ESP-400,ESP-600,ESP-1000... 2,3 PT-19XLS /PT-19XL ESP-200/300/400/600/1000,PCM8XL,PCM150/1500...
TORCH SYSTEM PAGE PT-15 /PT-15XL PCM-8,ESP-300,ESP-400,ESP-600,ESP-1000... 2,3 PT-19XLS /PT-19XL ESP-200/300/400/600/1000,PCM8XL,PCM150/1500... 4,5 PT-600 ESP200/400/600C/1000.PCM8XL,PCM150/1500... 6 PT-17A
More informationCO 2 laser consumables Mitsubishi
CO 2 laser consumables Mitsubishi Contents Laser Our value proposition Product breadth with over 2,800 s OEM quality/consistency for nozzles, ceramics and optics Technical/application support from OEM-trained
More informationTECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS
TECHNICAL GUIDE For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS EXPLODED VIEW & PARTS LIST TROUBLESHOOTING ORDERING INFORMATION
More informationHT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
More informationhttp://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html TECHNICAL SERVICE DEPARTMENT Removal, Cleaning, & Reinstallation of the Burner Assembly For models 74 & GT199 Required tools -
More informationCOMPACT POWER TWIN RELAY
FTR-K1 SERIES COMPACT POWER TWIN RELAY 1 POLE x 2-25A, H-Bridge (for automotive applications) FTR-P4 Series FEATURES Compact for high density packaging High contact capacity with proven contact material
More information1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
More informationThe cylinder head bolts tightening stages have been updated as listed in Table 1.
NUMBER: 07 EPA04 MBE 4000-6 S.M. REF.: 1.2.2 ENGINE: MBE 4000 DATE: November 2007 SUBJECT: CYLINDER HEAD BOLTS TIGHTENING STAGES PUBLICATION: 6SE412 The cylinder head bolts tightening stages have been
More informationTotal Plasma Cutting Flexibility SL100. One Torch for Virtually Any Plasma Cutting System! Automated Systems Replacement Plasma Cutting Torch
SL100 One for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility Available With Our Quick Change Connector! Automated Systems Replacement Plasma Cutting The Revolution in Plasma es Has
More informationPOWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES
POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and
More informationCOOLING SYSTEM Section Page
5 COOLING SYSTEM Section Page 5.1 COOLANT PRE-HEATER... 5-3 5.2 COOLANT PUMP NON-EGR ENGINE... 5-7 5.3 COOLANT PUMP EGR ENGINE... 5-13 5.4 FRONT CONNECTOR HOUSING NON-EGR ENGINE... 5-17 5.5 FRONT CONNECTOR
More informationFire Hydrant Troubleshooting
Fire Hydrant Troubleshooting Pulsation or chatter during opening and flow of water from hydrant. Loose condition in stem at lower valve plate nut. Tighten lower valve plate nut and secure with SS lock
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationOVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless)
OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 3 05 Litho In U.S.A. (cre) 1 Part No. Rev.A OVEN PARTS 1 Literature Parts 4455994 Installation Instructions Use & Care Guide 8300346 Microwave
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationOVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel)
OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 7 03 Litho In U.S.A. (cre) 1 Part No. OVEN PARTS NOTE: The screws and nuts required to attach a part are listed immediately following that part.
More informationPVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
More informationPOSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
More informationPlastic-Shelled Waterproof Connectors for Outdoor Use
Plastic-Shelled Waterproof Connectors for Outdoor Use HR41 Series Bayonet Lock Matching Mark Features 1. Weather-resistant and waterproof connectors for outdoor use Lightweight, outdoor, waterproof connectors
More informationDISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
More informationUNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
More informationOne Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility. www.thermal-dynamics.com. Take the Challenge
MANUAL SYSTEMS REPLACEMENT PLASMA CUTTING TORCH One Torch for Virtually Any Plasma Cutting System! Take the Challenge 30 Days, 100% Satisfaction or Your Money Back, Guaranteed! Call 1-800-752-7621 for
More informationContents. Description Page Description Page
Contents Description Page Description Page Auger Housing Assembly 1 Muffler 18 Handle and Control Assembly 3 Fuel Tank r Assembly 19 Engine and Drive Assembly 5 Clutch Retarder 20 Cylinder Head 7 Retarder
More informationReliable Pressure Measurement with Remote Diaphragm Seals in Cold Weather Applications
Reliable Pressure Measurement with Remote Diaphragm Reliable Pressure Measurement with Remote Diaphragm Introduction............................................................... page 1 Rosemount 3051S
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
16-400048-21 TITAN PB250 06/94 to Current IPL 211569 Page 1 of 13 Accessories www.ktoutdoor.com 16-400048-21 TITAN PB250 06/94 to Current IPL 211569 Page 2 of 13 Accessories 1 219179 1 Nozzle, Round 2
More information1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C
FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between
More informationLUBRICATION SYSTEM Section Page
4 LUBRICATION SYSTEM Section Page 4.1 ENGINE OIL CIRCUIT... 4-3 4.2 OIL SPRAY NOZZLE... 4-5 4.3 OIL PUMP... 4-12 4.4 OIL FILTER HOUSING... 4-15 4.5 OIL FILTER ELEMENT... 4-17 4.6 HEAT EXCHANGER... 4-19
More informationFEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL
Page 1 of 102 FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL DESIGN DATA Pump 2897-3R 2897-3 Test and Computation per Dwg No: 2897-3R Rev: B Date: 03/23/07 747-100 Series, 747-200B Series,
More information1 5 05-12 5 05-12. Additions, Revisions, or Updates
5 05-12 1 5 05-12 SUBJECT DATE Cylinder Head May 2012 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change DDC-SVC-MAN-0023 EPA04 MBE 4000 Cylinder Head Additional
More informationCutMaster 102. 6.04 Major External Replacement Parts
CutMaster 0 6.04 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-086 Tube, roll handle 9-0 4 Front Panel 9-087 Rear Panel 9-00 4 Art #
More informationCutMaster 82. 6.04 Major External Replacement Parts
CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationMultiport Spill Containment with Defender Spill Containers
Multiport Spill Containment with Defender Spill Containers Retrofit Installation Guide Overview Franklin Fueling Systems 3760 Marsh Rd. Madison, WI 53718 USA Tel: +1 608 838 8786 800 225 9787 Fax: +1 608
More informationTOOL SCHEMATIC AND PARTS MODEL 3150/38 W16R STAPLER
P MODEL 3150/38 W16R STAPLER IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #403606 for detailed information on this tool. It is the customer's responsibility to have all operators
More informationTANKER & STORAGE TANK PRODUCTS
Flotech Overfill Detection Products Overfill detection for road tankers is a secondary emergency shut-off system used to prevent overfilling of tanker compartments during the terminal loading process.
More informationNA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
More informationOperating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationTIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9
3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................
More informationSILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
More informationHigh Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
More informationStackFlowMaster FPD580 TORBAR probe Stack gas metering systems. Measurement made easy. Introduction. For more information
Commissioning instructions CI/FPD580/A EN StackFlowMaster FPD580 TORBAR probe Stack gas metering systems Measurement made easy Introduction This publication provides commissioning instructions for the
More informationAFE424 SERVICE PARTS
This is the parts list for the AFE. When looking up part numbers, always check the complete model and serial numbers to be certain of ordering the correct parts. The Air Cooled model has also been manufactured
More informationINTRODUCES MERLIN 1000 MAXIMUM FLEXIBILITY MAXIMUM PERFORMANCE MAXIMUM PARTS LIFE. Literature # 0-2721 09-Dec-98
INTRODUCES MERLIN 1000 MAXIMUM FLEXIBILITY MAXIMUM PERFORMANCE MAXIMUM PARTS LIFE Literature # 0-2721 09-Dec-98 DAVID R. ROUTHIER AUTOMATION SPECIALIST November 9, 1998 THERMAL DYNAMICS CORPORATION INDUSTRIAL
More informationFleck 4650. Service Manual INSTALLATION AND START-UP PROCEDURE TABLE OF CONTENTS JOB SPECIFICATION SHEET
Fleck 4650 Service Manual TABLE OF CONTENTS JOB SPECIFICATION SHEET...1 INSTALLATION AND START-UP PROCEDURE...1 CONTROL VALVE DRIVE ASSEMBLY...2 CONTROL DRIVE ASSEMBLY FOR CLOCK...3 BYPASS VALVE ASSEMBLY...4
More informationSTORED PRESSURE STAINLESS STEEL
STORED PRESSURE STAINLESS STEEL WATER FIRE EXTINGUISHERS Model 240-2-1/2 Gallon OWNER'S SERVICE MANUAL NO. 05601 INSPECTION, MAINTENANCE AND RECHARGE All fire extinguishers should be installed, inspected
More informationCOMPACT POWER RELAY. FTR-P3 Series. For automotive applications 1 POLE-25A (for 12V car battery) FTR-K1 SERIES FEATURES PARTNUMBER INFORMATION
COMPACT POWER RELAY For automotive applications 1 POLE-2A (for 12V car battery) FTR-P3 Series FTR-K1 SERIES FEATURES Compact for high density packaging High contact capacity with proven contact material.
More informationTOP AND CABINET PARTS For Models: WTW5500XW0, WTW5500XL0 (White) (Silver)
TOP AND CABINET PARTS AUTOMATIC WASHER 5 10 Litho in U.S.A. (drd)(bay) 1 Part No. Rev. A TOP AND CABINET PARTS 1 Literature Parts Installation Instructions W10240509 English/French W10240510 Spanish W10280477
More informationGlobal Motion Technology Inc Web www.motiontek.ca THCSA200. Capacitive sensor plasma & Oxy-fuel Torch Height Control
THCSA200 Capacitive sensor plasma & Oxy-fuel Torch Height Control Features 1) Stand alone controller for THC & OHC completely independent from CNC computer software or CNC control system 2) closed-loop
More informationPrice Book - Section 20 Miscellaneous
Effective Date Price Book - Central - 4" Dry Pipe Valve Model AF or AG (2002) (each) Valve Cover 40002000 $564.50 Cover Bolts (Purchase 6 Units Each) 60003000 $15.50 Cover Gasket 40004000 $139.00 Clapper
More informationSolstice/Sky Water Pump Replacement
Solstice/Sky Water Pump Replacement The water pump on the Solstice/Sky is starting to need replacement on some vehicles. This guide will help in replacing the water pump while the engine is still in the
More information11. COOLING SYSTEM 11-0 COOLING SYSTEM BET & WIN 50
11 COOLING SYSTEM SERVICE INFORMATION------------------------------------------------ 11-1 TROUBLESHOOTING----------------------------------------------------- 11-1 RADIATOR ------------------------------------------------------------------
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 1 of 20 Carburetor Assembly www.ktoutdoor.com 13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 2 of 20 Carburetor Assembly 214763-02
More informationPOWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting
More informationHSD High Speed Data interconnection
HSD High Speed Data interconnection Fast, safe and robust Very high data bit rate up to 5 Gbit/s SSR smart strain relief enables unstressed solder joints Excellent resistance against cross-talk and RF-EMC
More informationTOP AND CABINET PARTS
TOP AND CABINET PARTS AUTOMATIC WASHER 10 10 Litho in U.S.A. (drd) (psw) 1 Part No. W10337313 Rev. C TOP AND CABINET PARTS 1 Literature Parts Installation Instructions W10240509 English/French W10240510
More informationINSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
More informationNEW PROXIMITY SENSORS E2B
NEW PROXIMITY SENSORS E2B A New World Standard Afforda OMRON, a pioneer in Proximity Sensors, brings you the new E2B Proximity Sensor with exceptional pricing. A complete lineup designed to offer you with
More informationDew Point Tester. Instruction Manual. CVS Regular Chiller Model A-2. CVS Regular Chiller Model A-2
Instruction Manual Dew Point Tester The CVS Dew Point Tester is a chilled mirror apparatus, which operates by attaining the conditions necessary by the definition of dew point. When a gas is cooled out
More informationintroduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide.
introduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide. In an effort to make servicing your V-Twin engine easier, the staff at Midwest Motorcycle Supply have put together what we believe
More information1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
More information18SP653* EPA04 and EPA98 MBE 4000 High Pressure Fuel Line and Transfer Tube Installation
18SP653* EPA04 and EPA98 MBE 4000 High Pressure Fuel Line and Transfer Tube Installation * - Rev. 9/24/08 KIT DESCRIPTION A service kit (P/N: A4600700135) is now available to install EPA07 high pressure
More informationTC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
More informationINSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
More informationMTA1 CAN, M1 10Prog CAN, AT1CAN, AT1 CoarseFine CAN, M1, AT1, AT1 CoarseFine, RA 12, RA 23, RA T1, FS 002 CAN, FS 002
GB MTA1 CAN, M1 10Prog CAN, AT1CAN, AT1 CoarseFine CAN, M1, AT1, AT1 CoarseFine, RA 12, RA 23, RA T1, FS 002 CAN, FS 002 Instruction manual 0459 576 101 GB 090129 Valid for serial no. 506 -xxx -xxxx, 719
More informationMachine-side reference guide
Machine-side reference guide 803640 Plasma Plasma: the fourth state of matter The first three states of matter are solid, liquid and gas. For the most commonly known substance water these states are ice,
More informationC O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
More informationType 119 Control Valve
Instruction Manual Form 5204 Type 119 December 2009 Type 119 Control Valve Introduction Scope of the Manual This instruction manual provides installation, spring adjustment, maintenance, and parts information
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationPOWER WAVE 455M/STT & (CE)
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-450 P-450 PARTS LIST FOR POWER WAVE 455M/STT & (CE) P-450-A P-450-A ILLUSTRATION
More information2006 JUDY SERVICE GUIDE
2006 JUDY SERVICE GUIDE For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject
More informationASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared.
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES 1. Before to start to flare the tube check for the correct parameters of all the tools to be used and substitute 2. Cut the tube at a 90 angle
More informationFOR BOARD-TO-CABLE CONNECTION
FOR OARD-TO-ALE ONNETION 230 SERIES (FOR FLAT ALE ONNETION) FEATURES Two 1.27 mm (0.050 in.) pitch flat cables can be used. 1.27 mm (0.05 in.) pitch contact arrangement in two rows and terminal arrangement
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationPrecision components from start to finish. Excellence. in performance-critical machining & fabrications
Precision components from start to finish Excellence in performance-critical machining & fabrications Leading precision machining technology... Fully integrated solutions Facilities and capabilities The
More informationVolkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
More informationCOMMERCIAL GAS DRYER
COMMERCIAL GAS DRYER MODELS CGM2941TQ0 CGM2941TQ1 07 08 Litho in U.S.A. (LT)(mek) c 2008 WHIRLPOOL CORPORATION Part No. Rev. B BULKHEAD PARTS (White) (White) 2 BULKHEAD PARTS 1 Literature Parts 8563800
More information1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
More informationFigure 2 The fan and shroud also needs to be removed for access to the four a/c compressor bolts and removal of the compressor from the top.
Here are some pictures to show what s required when replacing the A/C compressor, expansion valve and receiver/drier on a 2001 Volvo V70. Even if you don t replace these A/C parts these pictures can help
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationMDT5N25 & MTD5N40 SERVICE PARTS
MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts
More informationQuick release couplings SPC Self aligning and flat faced
Quick release couplings SPC Self aligning and flat faced Applications Machine tools : connection and disconnection of machining heads and broaching heads. Machine tools : hydraulic clamping and palletisation.
More informationThank You For Choosing. INSTALLATION INSTRUCTIONS Portal Gear Hubs Polaris RZR 800. (installation performed on 60 Model) (Right) (Left)
740B Clifty Drive Madison, Indiana 47250 812-574-7777 INSTALLATION INSTRUCTIONS Portal Gear Hubs Polaris RZR 800 A (installation performed on 60 Model) Item Description Qty A Rotor 4 B Gear Box, L 2 C
More informationHeavy Truck & Trailer Parts. Engine Parts Partes de Motor
Heavy Truck & Trailer Parts Engine Parts Partes de Motor PISTON RING CUMMINS DETROIT KTC No. REPLACE SET MACK NAVISTAR PAI P.C TOP 2ND 3RD OIL 127-3803471 3803471 - - - 505025 S41889 Cummins NT855 218025
More informationCOMMERCIAL GAS DRYER
COMMERCIAL GAS DRYER MODELS CGD8990XW0 4 12 Litho In U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. Rev. B TOP AND CONSOLE PARTS 2 TOP AND CONSOLE PARTS 1 Literature Parts W10184516 Installation
More informationEaton Heat Containment System (HCS) Chimney. Installation Guide
Eaton Heat Containment System (HCS) Chimney Installation Guide Copyright 2011 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document is subject to change without notice.
More informationUpgrading a GainMaker Line Extender from a Line-Powered Source to a 120 V AC-Powered Source Installation Instructions
Upgrading a GainMaker Line Extender from a Line-Powered Source to a 120 V AC-Powered Source Installation Instructions Overview Audience These installation instructions are intended for all cable system
More informationRobot Welding Torch System
T e C H N O L O G y f O R T H e W e L d e R s W O R L d. Robot Welding Torch System W W Robot welding torch system... The universal MIG/MAG-torch system for robot welding: A new interface and cable assembly
More informationInstallation Instructions 4662.003
Installation Instructions.00 SINGLE CONTROL KITCHEN FAUCET Thank you for selecting American-Standard...the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly--please
More informationO-Ring Kit No. 9-9488 for XT-Series Torch. Installation Instructions. General Information. Parts Supplied. Procedure. Torch O-Ring Change.
O-Ring Kit No. 9-9488 for XT-Series Torch Original Publication Date: 2003 Manual no.: 0-4951 Revision Date: 5/05/2014 Revision: AJ General Information This kit is for use only with Victor Thermal Dynamics
More informationFor additional information, please visit our website at www.emersonprocess.com/raihome/liquid/.
Instruction Sheet PN 51A-499AOZ/rev.H September 2010 Model 499A OZ Ozone Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS APPLICATION
More informationThank You For Choosing. INSTALLATION INSTRUCTIONS Portal Gear Hubs Polaris RZR XP 900 Crew. (Right) (Left)
740B Clifty Drive Madison, Indiana 47250 812-574-7777 INSTALLATION INSTRUCTIONS Portal Gear Hubs Polaris RZR XP 900 Crew A Item Description Qty A Rotor 4 B Gear Box, L 2 C Gear Box, R 2 D Gasket 4 E Cap
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More informationMyers Hubs. The broadest, most complete offering for terminating Rigid/IMC to a box or enclosure
Myers Hubs The broadest, most complete offering for terminating Rigid/IMC to a box or enclosure Myers Hubs The Original! Often imitated, never duplicated! Available in a wide range of sizes, materials
More information758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
More informationSTPS20L15DPbF SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 20Amp V R = 15V. Bulletin PD-20873 rev. A 02/07. Major Ratings and Characteristics
STPS20L5DPbF SCHOTTKY RECTIFIER 20 Amps I F(AV) = 20Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 20 A waveform V RRM 5 V I FSM @ tp = 5 μs sine 700 A
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
More information