TORCH SYSTEM PAGE PT-15 /PT-15XL PCM-8,ESP-300,ESP-400,ESP-600,ESP ,3 PT-19XLS /PT-19XL ESP-200/300/400/600/1000,PCM8XL,PCM150/

Size: px
Start display at page:

Download "TORCH SYSTEM PAGE PT-15 /PT-15XL PCM-8,ESP-300,ESP-400,ESP-600,ESP-1000... 2,3 PT-19XLS /PT-19XL ESP-200/300/400/600/1000,PCM8XL,PCM150/1500..."

Transcription

1 TORCH SYSTEM PAGE PT-15 /PT-15XL PCM-8,ESP-300,ESP-400,ESP-600,ESP ,3 PT-19XLS /PT-19XL ESP-200/300/400/600/1000,PCM8XL,PCM150/ ,5 PT-600 ESP200/400/600C/1000.PCM8XL,PCM150/ PT-17A PCM-70,PCM-100/ PT-121/PT-20AM PCM-70/100/150,PCM-100/875/1125/ESP-100i... 8 PT-23 PCM-750i... 9 PT-24 Precision Plasmarc PT-25,PT-26 ESP-100i/PCM-150,ESP-150,Duece Pack 150,ESP PT-27 PCM-750i/1000i,PCM-875/1125,Handy Plasma 70 LPH50/80 power cut PT-31 /PT-31XL PCM-Vpi,PCM-Smi,PCM 500i/625i/50A/875/1125, CaddyCut, Handy Plasma PT-32,PT-34 Powercut875/1125/1500,Handy Plasma ESAB, PT-15, PT-15XL, PT-19XLS, PT-19XL, PT-600 PT-17A, PT-20AM, PT-24, PT-25, PT-26, PT-27 PT-31, PT31XL, PT-32, PT-34 are the registered trademarks of ESAB. L-TEC is the registered trademark of L-TEC Cutting Systems.

2 PT-15, PT-15XL Torch 1. T Gasket N2 5 T Gas Baffle, 8-holes 1 2. T Insulator.260 N2 5 T Baffle, Gas, Std. 8 x.047, O 2 1 T Insulator.225 N2 5 T Sw. Baffle, Alumina CCW 2 T Insulator.180 N2 5 T Swirl Baffle, Alumina, 4 Hole 2 T Insulator.140 N2 5 T Swirl Baffle, CCW, 4 Hole, N2 2 T Insulator T Swirl Baffle, 4 Holes, N T Spacer N T Front Insulator 1 4. T Water Swirl Ring, CCW N T Torch Body, PT 15XL 1 T Water Swirl Ring N T Electrode Holder, OXY 1 5. T Centering Sleeve N T Electrode OXY, 260A 5 6. T Noz Base.250 N2 1 T-4900** AG Electrode, OXY, 260A (Silver-EX) 5 T Noz Base.230 N2 1 T-4906** 35666XL AG Electrode, OXY. 300/340A (Silver-EX) 5 T Noz Base.200 N2 1 T Electrode, OXY, 300/340A 5 T Noz Base.156 N T Nozzle, OXY, 260A 1 T Noz Base.125 N2 1 T Nozzle, O 2 300A 1 7. T Noz Assy,.250 Std N2 1 T Nozzle, O 2 340A 1 T Noz Assy,.230 CCW, Std N T Ret. Cap, PT 15 1 T Noz Assy,.230 Std N2 1 T Ret. Cap, XL, Bevel. 1 T-2914** Noz Assy,.230 Heavy Duty N T Ret. Cap, XL, Std 1 T Noz Assy,.200 CCW, Std N2 1 NS T Locating Pin 1 T Noz Assy,.200 Std N2 1 NS T * Contact Ring Assembly 1 T-0992** Noz Assy,.200 Heavy Duty N2 1 NS T O-Ring 10 T Noz Assy,.156 CCW, Std N2 1 NS T W85 O-Ring 10 T Noz Assy,.156 Std N2 1 NS T O-Ring 10 T-0995** Noz Assy,.156 Heavy Duty N2 1 NS T-1257* O-Ring 10 T Noz Assy,.125 CCW, Std N2 1 NS T O-Ring 10 T Noz Assy,.125 Std N2 1 NS T W10 O-Ring T Electrode, N2 5 NS T W99 O-Ring T Electrode Holder N2 1 NS T * Front End Insulator T Sw. Baffle, 8 Holes, High Current, O 2 2 **A UNIQUE DESIGN WHICH ENHANCES PERFORMANCE AND DIFFERS FROM OEM DESIGNS 2 ESAB, PT-15, PT-15XL are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts

3 PT-15, PT-15XL Torch 1. T Insulating Sleeve 1 T Injection Hose, 20, ESP 1 2. T Pilot Arc Cable, 6, ESP 1 T Injection Hose, 25, ESP 1 T Pilot Arc Cable, 12, ESP 1 T Injection Hose, 6, PCM-8 1 T Pilot Arc Cable, 15, ESP 1 T Injection Hose, 8, PCM-8 1 T Pilot Arc Cable, 20, ESP 1 6. T-1358 T-1358 Tubing 1 T Pilot Arc Cable, 25, ESP 1 7. T-1359 T-1359 Shielding Braid 1 T Pilot Arc Cable, 6, PCM T-1360 T-1360 Lead Package, 6, ESP 1 T Pilot Arc Cable, 8, PCM-8 1 T-1361 T-1361 Lead Package,12, ESP 1 T Pilot Arc Cable 1 T-1362 T-1362 Lead Package, 15, ESP 1 3. T Power Cable, 6, ESP 1 T-1363 T-1363 Lead Package, 20, ESP 1 T Power Cable, 12, ESP 1 T-1364 T-1364 Lead Package, 25, ESP 1 T Power Cable, 15, ESP 1 T-0999 T-0999 Lead Package, 6, PCM-8 1 T Power Cable, 20, ESP 1 T-1365 T-1365 Lead Package, 8, PCM-8 1 T Power Cable, 25, ESP 1 T XL w/ Leads, 6 ESP 1 T Power Cable, 6, PCM-8 1 T XL w/leads, 12 ESP 1 T Power Cable, 8, PCM-8 1 T XL w/leads, 15 ESP 1 4. T Gas Hose, 6, ESP 1 T XL w/leads, 20 ESP 1 T Gas Hose, 12, ESP 1 T XL w/leads, 25 ESP 1 T Gas Hose, 15, ESP 1 T XL w/leads, 6 PCM8 1 T Gas Hose, 20, ESP 1 T XL w/leads, 8 PCM8 1 T Gas Hose, 25, ESP 1 NS T Connector, H.F. 1 T Gas Hose, 6, PCM-8 1 NS T Insulator, H.F. 1 T Gas Hose, 8, PCM-8 1 NS T H.F. Wire 1 5. T Injection Hose, 6, ESP 1 NS T Wire Insulator 1 T Injection Hose, 12, ESP 1 NS T Plug for Pilot Arc Cable 1 T Injection Hose, 15, ESP 1 ESAB, PT-15, PT-15XL are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems 3

4 PT-19XLS 1. T * Shield Retainer 1 T * Electrode, N T Shield, 100A - 250A 1 8. T * Electrode Holder 1 T Shield, 325A - 600A 1 9. T Swirl Baffle, Alumina 4 Hole 2 3. T Diffuser, 50A 1 T Swirl Baffle, Alumina CCW 2 T Diffuser, 100A - 600A 1 T Swirl Baffle, Std 8 x T * Nozzle Retaining Cup T * Insulator Assembly 1 5. T Nozzle Tip, 50A T Torch Body 1 T Nozzle Tip, 100A 5 NS T * Contact Ring Assembly 1 T Nozzle Tip, 150A 5 NS T * Screw, Contact Ring 1 T Nozzle Tip, 200A 5 NS T O-Ring 10 T S Nozzle Tip, 250A 5 NS T W85 O-Ring 10 5a. T Nozzle Base, 50A 1 NS T O-Ring 10 T Nozzle Base, 100A - 360A 1 NS T O-Ring T Nozzle, 250A 1 NS T W89 O-Ring 2 T Nozzle, 360A 1 NS T O-Ring T XL Electrode, A 5 NS T Sleeve 1 T-4905** 34086XL AG Electrode, A (Silver-EX) 5 NS T * Nozzle Retainer 1 T-4904** 35886XL AG Electrode, 360A (Silver-EX) 5 NS T * Nozzle Retaining Cup 1 T * Electrode, N2, H-35, 600A 1 4 **A UNIQUE DESIGN WHICH ENHANCES PERFORMANCE AND DIFFERS FROM OEM DESIGNS ESAB, PT-19XLS are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts

5 PT-19XL Torch a T Heat Shield 5 8. T Torch Body 1 2. T * Retaining Cap 1 NS T * Nozzle, Bevel, O 2 1 T Nozzle Retainer 1 NS T Nozzle, Bevel, O 2, CCW 1 3. T Nozzle, 100 A 5 NS T * Contact Ring Ass y 1 T Nozzle, 150 A 5 NS T Locating Pin 1 T Nozzle, 200 A 1 NS T O-Ring 10 T Nozzle, 50 A 5 NS T W85 O-Ring 10 T S Nozzle Tip 250A 5 NS T O-Ring 10 T Nozzle, 250A 1 NS T O-Ring 10 T Nozzle, 360A 1 NS T W89 O-Ring 2 3a. T Nozzle, Base, 50 A 1 NS T O-Ring 10 T Nozzle, Base, A 1 NS T Shield, Amp 1 4. T Electrode, A 5 NS T Shield, Amp 1 T-4905** 34086XL AG Electrode, A (Silver-Ex) 5 NS T Diffuser, 50 Amp 1 T-4904** 35886XL AG Electrode, 360A (Silver-Ex) 5 NS T Diffuser, Amp 1 T * Electrode, N2, H35, 600A 1 NS T * Nozzle Retainer 1 5. T Electrode Holder 1 NS T Nozzle, 250 Amp 1 6. T Swirl Baffle, Ceramic 2 NS T Nozzle, 360 Amp 1 T Swirl baffle, CCW 1 NS T * Shield Retaining Assy T Insulator Assembly 1 **A UNIQUE DESIGN WHICH ENHANCES PERFORMANCE AND DIFFERS FROM OEM DESIGNS Accessories 1. T Insulating Sleeve 1 T Power Cable, T Pilot Arc Cable, 6 1 T Power Cable, 25 1 T Pilot Arc Cable, T Gas Hose, 6 1 T Pilot Arc Cable, 15 1 T Gas Hose, 12 1 T Pilot Arc Cable, 20 1 T Gas Hose, 15 1 T Pilot Arc Cable, 25 1 T Gas Hose, T Power Cable, 6 1 T Gas Hose, 25 1 T Power Cable, T-1359 T-1359 Shielding Braid 1 T Power Cable, 15 1 ESAB, PT-19XL are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts 5

6 PT 600 TM 1. T * Shield Retainer 1 T Nozzle 150A 1 2. T Shield, 50A 1 T Nozzle 200A 1 T Shield, A 1 T Nozzle 250A 1 T Shield, A 1 T Nozzle 360A 1 3. T Diffuser, 50 A 1 T Nozzle 400A 1 T Diffuser, A 1 T Nozzle 600A 1 4. T * Nozzle Retaining Cap 1 7. T-4907** AG Electrode, 250 Amp, Silver-EX 5 T * Nozzle Retainer, Air Curtain 1 T-4910** AG Electrode, 360/400A, Silver-EX 5 5. T Nozzle, Tip 50A 5 8. T * Electrode Holder 5 T Nozzle Tip, 100A 5 9. T Baffle, Gas, Std 8 X T Nozzle Tip, 150A 5 T Swirl Baffle, 4 Hole Std 1 T Nozzle Tip, 200A 1 T Swirl Baffle, 4 Hole Rev 1 T S Nozzle Tip, 250A 5 T Swirl Baffle, 8 Hole Std 1 5a. T Nozzle Base, 50A T * Contact Ring Assembly 1 T Nozzle Base, A 1 NS T * Mounting Sleeve PT T Nozzle 50A 1 NS T O-Ring 10 T Nozzle 100A 1 ESAB, PT-600 TM are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts 6 **A UNIQUE DESIGN WHICH ENHANCES PERFORMANCE AND DIFFERS FROM OEM DESIGNS

7 PT-17A 1. T Shroud 1 T * Tip, 100 Amp Gouging 1 2. T Heat Shield 1 4. T Electrode 1 T Heat Shield, SR 1 5. T Baffle Tube 2 T Heat Shield 1 6. T Electrode Adapter 2 T Heat Shield, HD 1 7. T Hand Torch 1 T Gouging Heat Shield Assy 1 T Machine Torch 1 3. T Tip, 30 Amp 5 8. T Shroud Cap 1 T Tip, 50 Amp 5 NS T Heat Shield Guard, Drag 1 T Tip, 70 Amp 5 NS T * Heat Shield Guard, Std 1 T Tip, 70A, Gouging 5 NS T Insulator 10 T Tip, 80 Amp 5 NS T * Wrench, Electrode 10 T Tip, 100 Amp 1 NS T-3466 KPE17 Parts Kit PT T * Handle 1 T-1217 T-1217 Control Cable, T * Switch Band 1 9. T * Plug 1 3. T Switch T-1218 T-1218 Hand Leads, T * Flex Support 1 T-1219 T-1219 Hand Leads, T Power Cable, 25 1 T-1220 T-1220 Machine Leads, T Power Cable, 50 1 T-1221 T-1221 Machine Leads, T Pilot Arc Cable, 25 1 NS T Hand Torch w/25 Leads 1 T Pilot Arc Cable, 50 1 NS T Hand Torch w/50 Leads 1 7. T Sheath, 25 1 NS T Machine Torch w/25 Leads 1 T Sheath, 50 1 NS T Machine Torch w/50 Leads 1 8. T-1216 T-1216 Control Cable, 25 1 ESAB, PT-17A are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts 7

8 PT-121 Torch a T Heat Shield T Baffle (999265) 5 T * Heat Shield, Long 5 T High Current Baffle 1 T * Gouging Heat Shield 1 6. T Spacer 5 T * Heat Shield Gouging HD 1 7. T Hand Torch, 70 1 T Drag Heat Shield 1 7a. T Machine Torch 1 2. T Tip, 150 Amp T Collet (999259) 1 T Tip, 110 Amp 10 T Collet 1 T Tip, 55 Amp 10 T Gouging Tip, 100A 1 T Tip, Gouging 5 9. T Cap 1 3. T Front Body Insert 1 NS T Gasket 5 T High Current Insert 1 NS T O-Ring T Electrode 10 NS T W50 O-Ring 2 T Electrode, Long T * Handle 1 8. T * Connector 1 2. T * Sheath 1 9. T-1241 T-1241 Hand Leads, T Switch 1 T-1242 T-1242 Hand Leads, T Power Cable, 25 1 T-1243 T-1243 Machine Leads, 25 1 T Power Cable, 50 1 T-1244 T-1244 Machine Leads, T HF Cable, 25 1 NS T Hand Torch w/ 25 Leads 1 T HF Cable, 50 1 NS T Hand Torch w/ 50 Leads 1 6. T Sleeving, 25 1 NS T Machine Torch w/ 25 Leads 1 T Sleeving, 50 1 NS T * Machine Torch Handle 1 7. T Control Cable, 25 1 NS T Center Tool 1 T Control Cable, 50 1 PT-20AM Torch 1. T Heat Shield, 70/100 Amp 1 6. T Electrode Adaptor 1 T Heat Shield, 50 Amp 1 7. T Electrode Seat 1 2. T Tip, 50 Amp 5 8. T Torch Body 1 T Tip, 70 Amp 5 NS T-0575 T Leads Assy 1 T Tip, 100 Amp 5 NS T-0576 T Leads Assy 1 3. T Electrode 10 NS T-0587 T Leads Assy 1 4. T Insulator 1 NS T O Ring T Baffle Tube 1 NS T Torch Assy, 50 without rack 1 8 ESAB, PT-20AM are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts

9 PT-23 TORCH 1. T Shield 1 6. T W51 O-Ring T Retaining Nut 1 7. T Hand Torch 1 3. T Nozzle, 30 Amp 10 NS T Standoff 1 T Nozzle, 50 Amp 10 NS T Replaceable Seat 1 T Nozzle, 80 Amp 10 NS T * Heat Shield Guard, Gouging 1 4. T Swirl Baffle 5 NS T-3467 KPE23 Parts Kit PT T Electrode 10 ACCESSORIES 1. T * Handle 1 8. T * Plug 1 T Handle w/switch 1 9. T-1275 T-1275 Pilot Arc Lead, 25,w/plug 1 2. T * Switch Band 1 T-1276 T-1276 Pilot Arc Lead, 50,w/plug 1 3. T Switch T * Plug 1 4. T * Flex Support T-1278 T-1278 Leads Ass y, 25,w/plug 1 5. T Power Cable, 25 1 T-1279 T-1279 Leads Ass y, 50,w/plug 1 T Power Cable, 50 1 NS T Complete Ass y, 25,w/plug 1 6. T Sheath, 25 1 NS T Complete Ass y, 50,w/plug 1 T Sheath, 50 1 NS T N83 Boot 1 7. T-1273 T-1273 Control Cable, 25 1 NS T * Strain Relief 1 T-1274 T-1274 Control Cable, 50 1 ESAB is the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts

10 PT-24 ESAB T Shield Cup 15-30A 1 6. T * Swirl Baffle 15A 1 2. T Shield Cup Insulator 1 T * Swirl Baffle A 1 3. T * Cup Shield Retainer 1 7. T Electrode 5 4. T Nozzle Retainer/Diffuser 1 T AG Electrode, Silver-EX 5 5. T Nozzle 15A 5 8. T Water Baffle 1 T Nozzle 30A 5 9. T Torch Body, PT24 1 T Nozzle 50A 5 NS T * Insulator, Shield Retainer 1 T Nozzle 70A 5 NS T * Sleeve 1 T Nozzle 100A 5 NS T * Tool 1 10 ESAB, PT-24 are the Registered Trademarks of ESAB. * OEM Manufactured Parts

11 PT-25 TORCH 1. T * Gouging Guard 5 6. T Electrode, Air/N T * Stand-off Guide 1 7. T Electrode Holder 1 3. T Heat Shield 1 8. T O-Ring 10 T * Heat Shield, Long 1 9. T Torch Head 1 4. T Nozzle, 50 Amp 5 NS T PT25 w/25 Leads 1 T Nozzle, 100 Amp 5 NS T PT25 w/50 Leads 1 T Nozzle, 150 Amp 5 NS T-0578 T-0578 Leads Assy 25, PT25 1 T Nozzle, Gouging 5 NS T-0579 T-0579 Leads Assy 50, PT T * Swirl Baffle 2 NS T-3468 KPE25 Parts Kit, PT25 1 ACCESSORIES 1. T * Handle 1 T Sleeving, T * Switch Band 1 7. T Control Cable, T Switch 1 T Control Cable, T Power Cable, T * Plug 1 T Power Cable, 50 1 NS T * Flex Support 1 5. T HF Cable, 25 1 NS T Sensor Tube, 25 1 T HF Cable, 50 1 NS T Sensor Tube, T Sleeving, 25 1 PT-26 TORCH NS T Stand-off Guide 1 NS T Nozzle, Gouging 300 Amp 5 NS Heat Shield, Std NS T Electrode 5 NS T Nozzle 50 Amp 5 NS T Electrode, H35 5 NS T Nozzle 150 Amp Insulator 1 NS T Nozzle 200 Amp 5 NS T Baffle Tube 1 NS T Nozzle 300 Amp Electrode Holder 1 NS T Nozzle, Gouging 200 Amp 5 NS T Torch Body 1 ESAB, PT-25, PT-26 are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts 11

12 PT-27 TORCH 1. T Heat Shield( ) 1 6. T W51 O-Ring ( ) T Nozzle, 50A ( ) T Torch Body ( ) 1 T Nozzle, 80A ( ) 10 NS T Replaceable Seat 1 T Nozzle, Gouging ( ) 10 NS T * Heat Shield Guard, Gouging 1 3. T Swirl Baffle ( ) 5 NS T Tool, Seat Assy, PT T Electrode ( ) 10 NS T Seat Assy, PT T Valve Pin (OEM torch only) 5 NS T-3469 KPE27 Parts Kit, PT-27 1 ACCESSORIES 1. T * Handle 1 T-2910 T-2910 Pilot Arc Lead, 25,w/plug 1 T Handle w/switch 1 T-2911 T-2911 Pilot Arc Lead, 50,w/plug 1 2. T * Switch Band T * Plug 1 3. T Switch T-2340 T-2340 Leads Ass y, 25,w/ring 1 4. T * Flex Support 1 T-2341 T-2341 Leads Ass y, 50,w/ring 1 5. T Power Cable, 25 1 T-2908 T-2908 Leads Ass y, 25,w/plug 1 T Power Cable, 50 1 T-2909 T-2909 Leads Ass y, 50,w/plug 1 6. T Sheath, 25 1 NS T Complete Ass y, 25,w/ring 1 T Sheath, 50 1 NS T Complete Ass y, 50,w/ring 1 7. T-1273 T-1273 Control Cable, 25 1 NS T Complete Ass y, 25,w/plug 1 T-1274 T-1274 Control Cable, 50 1 NS T Complete Ass y, 50,w/plug 1 8. T * Plug 1 NS T N83 Boot 1 9. T-2336 T-2336 Pilot Arc Lead, 25, w/ring 1 NS T * Strain Relief 1 T-2337 T-2337 Pilot Arc Lead, 50, w/ring 1 12 ESAB is the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts

13 PT-31, PT-31 XL, XT 1. T Shield Cup 1 8. T Electrode, XT ( ) 10 T Shield Cup, XL 1 9. T Swirl Baffle, XT ( ) T Tip, 30 Amp T Tip, 30 Amp, XT ( ) 10 T Tip, XL, 30 Amp 10 T Tip, 40 Amp, XT ( ) 10 T Tip, XL, 50 Amp 10 T Tip, 50 Amp, XT ( ) T Swirl Baffle T Heat Shield, XT 1 T Swirl Baffle, XL 10 NS T * Seat, Brass 1 4. T Electrode 10 NS T-2218 KPE31 Parts Kit PT31 1 T Electrode, XL 10 NS T-0764 KPE31XL Parts Kit PT31XL 1 5. T O-Ring ( ) 10 NS T-2217 KPE31XT Parts Kit PT31XT 1 6. T TMT-31 Hand Torch 1 NS T Spare Parts Kit 31XL 1 6a. T TMT-31 Machine Torch 1 NS T Spare Parts Kit 31XT 50A 1 7. T Plunger, XT (OEM torch only) 5 ACCESSORIES 1. T * Handle 1 T-1189 T-1189 Control Cable, T * Switch Band 1 T-1190 T-1190 Control Cable, T Switch 1 9. T-1191 T-1191 Leads Assy, T * Flex Support 1 T-1192 T-1192 Leads Assy, T Power Cable, T Leads Assy, 50 1 T Power Cable, 25 1 NS T Hand Torch w/12.5 Leads 1 T Power Cable, 50 1 NS T Hand Torch w/25 Leads 1 6. T Sheath, NS T Hand Torch w/50 Leads 1 T Sheath, 25 1 NS T Machine Torch w/12.5 Leads 1 T Sheath, 50 1 NS T Machine Torch w/25 Leads 1 7. T * Plug 1 NS T Machine Torch w/50 Leads 1 8, T-1188 T-1188 Control Cable, NS T N83 Boot 1 XL, XT AND STANDARD PARTS SHOULD NOT BE MIXED WHEN CUTTING ESAB, PT-31, PT-31XL, XT are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts 13

14 PT-32 TORCH NS T * Stand-off Guide 1 NS T * Nozzle 40A 5 NS T * Heat Shield 1 NS T * Nozzle, Gouging 5 NS T * Heat Shield, Gouging 1 NS T * Electrode 2 NS T * Nozzle 70A 5 NS T * Valve Pin 1 NS T * Nozzle 90A 5 NS T * Torch Body, PT32 1 PT-34 TORCH 1 T Heat Shield 1 NS T * Seat 1 2 T Nozzle 10 5 T Torch Body 1 3 T Swirl Baffle 10 T Torch W/ 15 Leads 1 4 T Electrode 5 14 ESAB, PT-32, PT-34 are the Registered Trademarks of ESAB. L-TEC is the Registered Trademark of L-TEC Cutting Systems * OEM Manufactured Parts

Centricut plasma torches and consumables for ESAB

Centricut plasma torches and consumables for ESAB plasma torches and consumables for ESAB Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY WIEDEMANN HT,

More information

CutMaster 82. 6.04 Major External Replacement Parts

CutMaster 82. 6.04 Major External Replacement Parts CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080

More information

CutMaster 102. 6.04 Major External Replacement Parts

CutMaster 102. 6.04 Major External Replacement Parts CutMaster 0 6.04 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-086 Tube, roll handle 9-0 4 Front Panel 9-087 Rear Panel 9-00 4 Art #

More information

Centricut plasma torches and consumables for Whitney

Centricut plasma torches and consumables for Whitney plasma torches and consumables for Whitney Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY WIEDEMANN

More information

11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories

11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 2 of 19 Accessories 84453 Kit - Piston tool 69191 Kit - Pressure test adaptor

More information

UNIVERSAL 1550 PRE-MIX DISPENSER

UNIVERSAL 1550 PRE-MIX DISPENSER MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95

More information

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS TECHNICAL GUIDE For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS EXPLODED VIEW & PARTS LIST TROUBLESHOOTING ORDERING INFORMATION

More information

STUD WELDING EQUIPMENT & ACCESSORIES CATALOG

STUD WELDING EQUIPMENT & ACCESSORIES CATALOG STUD WELDING EQUIPMENT & ACCESSORIES CATALOG WWW.PROWELDINTERNATIONAL.COM 129 COMMERCE DR LAGRANGE, OH. 44050 PHONE: (440)-355-6064 FAX: (440)-355-6474 07/01/02 CD WELDING SYSTEMS PART # LIST PRICE CD-212

More information

OVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless)

OVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless) OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 3 05 Litho In U.S.A. (cre) 1 Part No. Rev.A OVEN PARTS 1 Literature Parts 4455994 Installation Instructions Use & Care Guide 8300346 Microwave

More information

Robot Welding Torch System

Robot Welding Torch System T e C H N O L O G y f O R T H e W e L d e R s W O R L d. Robot Welding Torch System W W Robot welding torch system... The universal MIG/MAG-torch system for robot welding: A new interface and cable assembly

More information

REPAIR AND MAINTENANCE MANUAL

REPAIR AND MAINTENANCE MANUAL REPAIR AND MAINTENANCE MANUAL Professional Pest Control Application Equipment Prime Line Sprayers B&G Equipment Company 135 Region South Drive, Jackson, GA 30233 800.544.8811 Phone 678.688.5601 Fax 678.688.5633

More information

MDT5N25 & MTD5N40 SERVICE PARTS

MDT5N25 & MTD5N40 SERVICE PARTS MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 1 of 16 Accessories www.ktoutdoor.com 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 2 of 16 Accessories

More information

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1 TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240

More information

CHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation.

CHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. CHAPTER 5 PARTS PARTS BY PICTORIAL This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. NOTE: The following is a breakdown description of the

More information

360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor

360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor 360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor 360 Automatic Chain Saw UT-10468 Page 2 of 15 Carburetor 1 93205A 1 Repair Kit 2 93205A 1 Repair Kit 3 93205A 1 Repair Kit 4 93205A 1 Repair Kit

More information

OVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel)

OVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel) OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 7 03 Litho In U.S.A. (cre) 1 Part No. OVEN PARTS NOTE: The screws and nuts required to attach a part are listed immediately following that part.

More information

Rheem Spare Parts Manual. Commercial gas model A631265 Exterior 265L

Rheem Spare Parts Manual. Commercial gas model A631265 Exterior 265L Commercial gas model A631265 Exterior 265L Commercial gas model A631265 Exterior 265L Item Part No. Description 1 221735 Foam cover 2 221914 Anode x 3 (black) 1153mm 2 221924 Anode x 3 (blue) 1153mm 3

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories www.ktoutdoor.com 11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

SPARE PARTS EXPLODED VIEW GAS WALL BOILERS Model. CELTIC RSc b CUENOD. R8202395-02EN - Edition 02-21/04/2005

SPARE PARTS EXPLODED VIEW GAS WALL BOILERS Model. CELTIC RSc b CUENOD. R8202395-02EN - Edition 02-21/04/2005 CUENOD Instantaneous Gas Water Heaters Storage Gas Water Heaters SPARE PARTS EXPLODED VIEW GAS WALL BOILERS Model CELTIC RSc b R8202395-02EN - Edition 02-21/04/2005 Boilers Solar Panel 69214511 31 CELTIC

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 1 of 20 Accessories & Tools www.ktoutdoor.com 11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 2 of 20 Accessories

More information

SCCG50 & SCCP50 Service Parts

SCCG50 & SCCP50 Service Parts SCCG0 & SCCP0 Service Parts This is the illustrated parts list for the SCCG0M and the SCCP0M esidential Ice Machines hen ordering a service part, always refer to the complete model number of the equipment

More information

Air Vantage 500 Kubota

Air Vantage 500 Kubota Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-625 P-625 RETURN TO MAIN INDEX PARTS LIST FOR Air Vantage 500 Kubota P-625-A

More information

K&T Saw Shop 606-678-9623 or 606-561-4983. 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories

K&T Saw Shop 606-678-9623 or 606-561-4983. 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 2 of 11 Accessories 68899 Piston Assy - 0.005 in. oversize 66790 Ring Set - Piston 0.005

More information

REMOVAL AND INSTALLATION

REMOVAL AND INSTALLATION 303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214

More information

Upgrading a GainMaker Line Extender from a Line-Powered Source to a 120 V AC-Powered Source Installation Instructions

Upgrading a GainMaker Line Extender from a Line-Powered Source to a 120 V AC-Powered Source Installation Instructions Upgrading a GainMaker Line Extender from a Line-Powered Source to a 120 V AC-Powered Source Installation Instructions Overview Audience These installation instructions are intended for all cable system

More information

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 OPERATION AND SERVICE INSTRUCTIONS AMPHENOL 157 SERIES TELE-PIERCE MULTI-WIRE TERMINATION TOOL 356-246 AMPHENOL TERMINATION SYSTEMS 1830

More information

PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99

PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99 PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin

More information

Total Plasma Cutting Flexibility SL100. One Torch for Virtually Any Plasma Cutting System! Automated Systems Replacement Plasma Cutting Torch

Total Plasma Cutting Flexibility SL100. One Torch for Virtually Any Plasma Cutting System! Automated Systems Replacement Plasma Cutting Torch SL100 One for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility Available With Our Quick Change Connector! Automated Systems Replacement Plasma Cutting The Revolution in Plasma es Has

More information

FANG 24T, 26T and 28T -EU

FANG 24T, 26T and 28T -EU Model: FANG 24T FANG 26T FANG 28T Lista Części Polish Spis Treści Solution tank 3 Recovery tank 5 Brush lift - Drive 7 Brush - Pad Drive 9 Solution Control 11 Brush skirt 13 Control housing 15 Squeegee

More information

refrigeration SOFT SERVE #30CMT ICE CREAM MACHINE ELECTRO FREEZE HEAD ASSEMBLY BEATER SHAFT ASSEMBLY KEY PART # DESCRIPTION KEY PART # DESCRIPTION

refrigeration SOFT SERVE #30CMT ICE CREAM MACHINE ELECTRO FREEZE HEAD ASSEMBLY BEATER SHAFT ASSEMBLY KEY PART # DESCRIPTION KEY PART # DESCRIPTION Having your serial # ready before ordering ElectroFreeze parts, when calling our sales staff, will ensure speed & accuracy. 9 0 HEAD ASSEMBLY BEATER SHAFT ASSEMBLY EF Beater Shaft EF90 Cylinder Bushing

More information

COMMERCIAL GAS DRYER

COMMERCIAL GAS DRYER COMMERCIAL GAS DRYER MODELS CGD8990XW0 4 12 Litho In U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. Rev. B TOP AND CONSOLE PARTS 2 TOP AND CONSOLE PARTS 1 Literature Parts W10184516 Installation

More information

SERVICE SERVICE COMPACT MANUAL. Mod. 3000 92X Mod. 3000 93X Mod. 3000 94X. Part 2

SERVICE SERVICE COMPACT MANUAL. Mod. 3000 92X Mod. 3000 93X Mod. 3000 94X. Part 2 SERVICE COMPACT SERVICE 000 MANUAL Mod. 000 9X Mod. 000 9X Mod. 000 94X Part Forward This Service Handbook is intended to assist with servicing and fault-finding in Caravans and Motor Caravans equipped

More information

VE13P-EU. Model: VE13. Lista Części Polish

VE13P-EU. Model: VE13. Lista Części Polish Model: VE13 Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 RECOMMENDED SPARE PARTS 13 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy

More information

REDFYRE CENTRAL-HEATING COOKER (OIL & GAS FIRED)

REDFYRE CENTRAL-HEATING COOKER (OIL & GAS FIRED) REDFYRE CENTRAL-HEATING COOKER (OIL & GAS FIRED) MODELS 0, 80, 00, 20 PARTS LIST AUGUST 202 A REDFYRE CENTRAL HEATING COOKER ---- TOP - PLATE & LIDS 2 REDFYRE CENTRAL HEATING COOKER ---- TOP - PLATE &

More information

OVEN PARTS For Models:RBS305PDB16, RBS305PDQ16, RBS305PDT16, RBS305PDS16 (Black) (Designer White) (Biscuit) (S.Steel)

OVEN PARTS For Models:RBS305PDB16, RBS305PDQ16, RBS305PDT16, RBS305PDS16 (Black) (Designer White) (Biscuit) (S.Steel) OVEN PARTS 30" BUILT IN ELECTRIC OVEN SELF CLEAN 10 04 Litho in U.S.A.(cre) 1 Part No. OVEN PARTS 1 Literature Parts LIT8300654 Installation Instructions LIT8300772 Use & Care Guide (Oven) LIT8301758 Tech

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 11-600097F MINI-MAC 35AS 07/76 to 04/77 IPL 92754A-R1 Page 1 of 12 Accessories www.ktoutdoor.com 11-600097F MINI-MAC 35AS 07/76 to 04/77 IPL 92754A-R1 Page 2 of 12 Accessories 91753 Case - Carrying 88756

More information

Square Wave TIG 200 TIG WELDING MACHINE

Square Wave TIG 200 TIG WELDING MACHINE Square Wave TIG 200 TIG WELDING MACHINE Simplicity Without Compromise The Square Wave TIG 200 is a portable TIG and stick welding machine that lets hobbyists, makers, small fabricators and craftsmen explore

More information

46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis

46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression

More information

SAFETY SAFETY APPAREL 20,000 PSI

SAFETY SAFETY APPAREL 20,000 PSI SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement

More information

Contents. Description Page Description Page

Contents. Description Page Description Page Contents Description Page Description Page Auger Housing Assembly 1 Muffler 18 Handle and Control Assembly 3 Fuel Tank r Assembly 19 Engine and Drive Assembly 5 Clutch Retarder 20 Cylinder Head 7 Retarder

More information

ILLUSTRATED PARTS LIST XTREME ICE MAKER (1230 SERIES) MODEL NO.

ILLUSTRATED PARTS LIST XTREME ICE MAKER (1230 SERIES) MODEL NO. XTREME ICE MAKER (0 SERIES) MODEL NO. 00 00 00 00 00 00 0 XTREME ICE MAKER (0 SERIES) FIGURE. GENERAL ASSEMBLY (AIR CONDENSER SHOWN) 00 Screw TC - HXWS 00000 Screw TC - HXWS 0 (Marine) 0000 Grommet Nut

More information

K-39/K-39B. Drain Cleaning Machine. Ridge Tool Company/Elyria, Ohio, U.S.A.

K-39/K-39B. Drain Cleaning Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. K-/K-B A- AUTOFEED Cable Chuck Pan Head Screw # - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () Spacer Clips () Gasket Drum Front Drum Liner Screw # - x () Drum Back Power

More information

Parts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure.

Parts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure. Parts Ultra 395/495/595t Ultra Max II 490/495/595t 309675V EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t 2339 B 233961 B 233962

More information

SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE

SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop

More information

MIXER K45SS AND KSM75

MIXER K45SS AND KSM75 INTERNATIONAL PART NUMBERS ITALICIZED MIXER VARIATIONS OF K45SS AND KSM75 SOLID STATE c 2003 KITCHENAID 09 03 Litho in U.S.A. (bd) This Parts List Supercedes All Previous K45SS Parts Lists. Updates Required

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

Repair Parts List DRYER MODEL NUMBER MDE3000AYW. When requesting service or ordering parts, always provide the following information:

Repair Parts List DRYER MODEL NUMBER MDE3000AYW. When requesting service or ordering parts, always provide the following information: Repair Parts List DRYER MODEL NUMBER MDE3000AYW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005

More information

MIG/MAG. Spare Parts List 2.0 / V1. www.binzel-abicor.com

MIG/MAG. Spare Parts List 2.0 / V1. www.binzel-abicor.com T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. MIG/MAG Spare Parts List 2.0 / V1 www.binzel-abicor.com Copyright Copyright Alle Texte, Bilder, Zeichnungen und sonstige in der Gesamtpreisliste

More information

PROFESSIONAL PRODUCTS- PET NAIL GROOMERS

PROFESSIONAL PRODUCTS- PET NAIL GROOMERS - S SERVICE NUMBER 29-0A/-0B 29-0E 29-0F 29-0H 29-0J 29-0K 29-0 To select the model desired, click on the highlighted service number. D-5 S LIST NEW MODEL(S) ADDED FIRST ISSUE 6/76, COLUMN # FIRST ISSUE

More information

BILLET HEADLAMP WITH SHORT/TALL MOUNTS

BILLET HEADLAMP WITH SHORT/TALL MOUNTS -J099 REV. 00-0- BILLET HEADLAMP WITH SHORT/TALL MOUNTS GENERAL Kit Number 9-0, 9-0 Models Kit 9-0 is a -/ inch headlamp and kit 9-0 is a -/ inch headlamp. Both kits will fit the models listed in Table.

More information

www.vamatec.be lassen en lasmateriaal

www.vamatec.be lassen en lasmateriaal www.vamatec.be lassen en lasmateriaal 8 www.vamatec.be NEW BZL Pro-Grip tm Features and Benefits Swan Necks High temperature resistant insulation materials reducing the risk of shorting Durable and Robust

More information

COMMERCIAL GAS DRYER

COMMERCIAL GAS DRYER COMMERCIAL GAS DRYER MODELS CGM2941TQ0 CGM2941TQ1 07 08 Litho in U.S.A. (LT)(mek) c 2008 WHIRLPOOL CORPORATION Part No. Rev. B BULKHEAD PARTS (White) (White) 2 BULKHEAD PARTS 1 Literature Parts 8563800

More information

PAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation

PAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation MASTERXL PLUS- Air Plasma Cutting Systems 3 Year Warranty PakMaster 50XL PLUS-CE GENUINE CUT 12.7mm ( 1 2 ) SEVERANCE CUT 19.1mm ( 3 4 ) PakMaster 75XL PLUS-CE GENUINE CUT 19.1mm ( 3 4 ) SEVERANCE CUT

More information

Section M POWER LIFTS

Section M POWER LIFTS Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010

More information

Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.

Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts. Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1

More information

Fleck 4650. Service Manual INSTALLATION AND START-UP PROCEDURE TABLE OF CONTENTS JOB SPECIFICATION SHEET

Fleck 4650. Service Manual INSTALLATION AND START-UP PROCEDURE TABLE OF CONTENTS JOB SPECIFICATION SHEET Fleck 4650 Service Manual TABLE OF CONTENTS JOB SPECIFICATION SHEET...1 INSTALLATION AND START-UP PROCEDURE...1 CONTROL VALVE DRIVE ASSEMBLY...2 CONTROL DRIVE ASSEMBLY FOR CLOCK...3 BYPASS VALVE ASSEMBLY...4

More information

Required Supplies for Installing Check Tag Assembly

Required Supplies for Installing Check Tag Assembly Check Tag Assembly and Antenna Installation Instructions 411922-004 05/10 This document explains how to install and connect the check tag assembly and check tag antenna. Required Supplies for Installing

More information

TOP AND CABINET PARTS For Models: WTW5500XW0, WTW5500XL0 (White) (Silver)

TOP AND CABINET PARTS For Models: WTW5500XW0, WTW5500XL0 (White) (Silver) TOP AND CABINET PARTS AUTOMATIC WASHER 5 10 Litho in U.S.A. (drd)(bay) 1 Part No. Rev. A TOP AND CABINET PARTS 1 Literature Parts Installation Instructions W10240509 English/French W10240510 Spanish W10280477

More information

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431

More information

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION

MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br

More information

Assembly Instruction CAI- Connector with universal Endbell

Assembly Instruction CAI- Connector with universal Endbell CANNON STANDARD Seite 1 von 17 CAI- Connector with universal Endbell Shell size 10 to 36 with APK contact / Trident T2P - contact Illustration and assembly exemplary of CAI Layout 20-0306 with APK / Trident

More information

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines 40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3

More information

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

More information

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX

More information

TOP AND CABINET PARTS

TOP AND CABINET PARTS TOP AND CABINET PARTS AUTOMATIC WASHER 10 10 Litho in U.S.A. (drd) (psw) 1 Part No. W10337313 Rev. C TOP AND CABINET PARTS 1 Literature Parts Installation Instructions W10240509 English/French W10240510

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 1 of 20 Carburetor Assembly www.ktoutdoor.com 13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 2 of 20 Carburetor Assembly 214763-02

More information

VE17 DSP. Model: VE-17DS. Lista Części Polish

VE17 DSP. Model: VE-17DS. Lista Części Polish Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU

More information

P a r t s L i s t. P a r t s L i s t. Date:24.11.2008 Page: 1

P a r t s L i s t. P a r t s L i s t. Date:24.11.2008 Page: 1 Group:Duster/Mist Blowers Model:DM-4610(SrNr 004334 and before) Section:Cylinder, Crankcase, Piston 3 101514-06210 1 COVER, CYLINDER 4 145512-06210 1 GASKET, MUFFLER Sus. by 145512-06211 4 145512-06211

More information

WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928

WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928 WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.

More information

POWER WAVE 455M/STT & (CE)

POWER WAVE 455M/STT & (CE) Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-450 P-450 PARTS LIST FOR POWER WAVE 455M/STT & (CE) P-450-A P-450-A ILLUSTRATION

More information

NuStep TRS 4000 Parts List 1.6

NuStep TRS 4000 Parts List 1.6 NuStep TRS 4000 Parts List 1.6 Note: Most parts are available individually, but to simplify installation, ASSEMBLIES (in CAPS) only come fully assembled. Items noted as (not shown) were replaced with current

More information

PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1967 CHEVROLET IMPALA

PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1967 CHEVROLET IMPALA specializing in AIR CONDITIONING, PARTS AND SYSTEMS for your classic vehicle PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1967 CHEVROLET IMPALA CONTROL & OPERATING INSTRUCTIONS The controls on your new

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

AFE424 SERVICE PARTS

AFE424 SERVICE PARTS This is the parts list for the AFE. When looking up part numbers, always check the complete model and serial numbers to be certain of ordering the correct parts. The Air Cooled model has also been manufactured

More information

SC351. Model: SC351 NIL. Part List US-English

SC351. Model: SC351 NIL. Part List US-English Model: NIL Part List US-English Table of Contents GENERAL VIEW 3 COVER AND TANKS 5 FRAME SYST 7 HANDLE SUPPORT SYST 9 HANDLE SYST 12 MOTOR AND DECK SYST 15 BRUSH DECK SYST 17 ACCESSORIES 19 WIRING DIAGRAM

More information

125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN

125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x

More information

Common Rail Spare Parts Catalogue

Common Rail Spare Parts Catalogue Common Rail Spare Parts Catalogue Fax.No. ++44(0)54 53547 E-mail. sales@darwendiesels.co.uk www.darwendiesels.co.uk C O M M 7D50 4.5mmx7.5mmx.5mm copper Fitted to Mercedes 7D5 4.5mmx7.5mmx3mm copper Fitted

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 16-400048-21 TITAN PB250 06/94 to Current IPL 211569 Page 1 of 13 Accessories www.ktoutdoor.com 16-400048-21 TITAN PB250 06/94 to Current IPL 211569 Page 2 of 13 Accessories 1 219179 1 Nozzle, Round 2

More information

One Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility. www.thermal-dynamics.com. Take the Challenge

One Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility. www.thermal-dynamics.com. Take the Challenge MANUAL SYSTEMS REPLACEMENT PLASMA CUTTING TORCH One Torch for Virtually Any Plasma Cutting System! Take the Challenge 30 Days, 100% Satisfaction or Your Money Back, Guaranteed! Call 1-800-752-7621 for

More information

CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR

CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR Sterling Midi Junior is a transportable rear wheel drive, three or four wheel electric powered Scoota with pneumatic tyres, upolstered seat

More information

Reproduction. Not for. Coronet RD Series Riding Mowers. Parts Manual. 15.5HP Product. 17.5HP Product

Reproduction. Not for. Coronet RD Series Riding Mowers. Parts Manual. 15.5HP Product. 17.5HP Product Parts Manual 15.5HP Product Coronet RD Series Riding Mowers Mfg. No. Description 7800674 Coronet RD, 15.5HP Hydro (CE) 7800675 Coronet RD, 15.5HP Hydro (CE, FR) 17.5HP Product Mfg. No. Description 7800678

More information

A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS

A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.

More information

DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)

DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH) Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt

More information

Reasons for reissue are in Section 6, REVISION SUMMARY.

Reasons for reissue are in Section 6, REVISION SUMMARY. Figure 1 This instruction sheet covers the application of OPTIMATE FSMA Fiber Optic Connector Types 905 and 906 for data and telecommunications applications. Base part numbers which apply to each type

More information

POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT

POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric

More information

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS 8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263

More information

Magnum 250L, 250L FM & 250 SP Gun & Cable

Magnum 250L, 250L FM & 250 SP Gun & Cable P-0-H RETURN TO MAIN INDEX P-0-H PARTS LIST FOR Magnum 50L, 50L FM & 50 SP Gun & Cable MAGNUM 50L, 50L FM & 50 SP GUN & CABLE Part Numbers Part Numbers Part Numbers Part Numbers P-0-H. Magnum 50L FM 4

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003

More information

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47) 47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

ALTRA 400 Operator Manual. Planographs and Wiring Diagrams

ALTRA 400 Operator Manual. Planographs and Wiring Diagrams Planographs and Wiring Diagrams 16 Altra 400 Final Assembly All Altras w/head # Part # Description Specific Use (if any) 1 60323A Tank Assy, Altra 400 115 Volt model 60358A Tank Assy, Altra 400 SP 230

More information

PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR

PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR Ingersoll-Rand Company 800-B Beaty Street P. O. Box 1803 Davidson, NC 28036 1-800-AIR-SERV (1-800-247-7378) www.air.ingersoll-rand.com PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR Ingersoll-Rand

More information

XL PREMIUM OIL COOLER KIT

XL PREMIUM OIL COOLER KIT -J05 REV. 0-0-0 XL PREMIUM OIL COOLER KIT GENERAL Kit Number 0008 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English

More information

SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9

SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9 CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY

More information

EXPLORE 4-Leg Teaming Table with Screen Share Assembly Instructions

EXPLORE 4-Leg Teaming Table with Screen Share Assembly Instructions EXPLORE 4-Leg Teaming Table with Screen Share Monitor Display Requirements: your flat panel display must confirm to the following requirements. y With the stand removed, the monitor must not exceed 40

More information

Installation Instructions 6028.801

Installation Instructions 6028.801 DAZZLE Installation Instructions 08.80 Spread Lavatory Faucet with Speed Connect Drain* Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American

More information