PCB connectors SMD and also pin-in-paste types - are available as limited detent or smooth bore types.

Transcription

1 coaxial connectors from Rosenberger combine the advantages of SMP connectors minimum board-to-board spaces and of SMA connectors high performance and high power rating. Minimum board-to-board distances from 12.6 mm can be realized by using bullets of different lengths, yet connectors are designed for high power loads and operate at frequencies up to 10 GHz. -Koaxial-Steckverbinder von Rosenberger verbinden die Vorteile der Serien SMP geringstmögliche Leiterplattenabstände und SMA hohe Leistung miteinander. Durch Verwendung von Bullets sind minimale Leiterplattenabstände ab 12,6 mm möglich, gleichzeitig sind -Steckverbinder bei hohen Leistungen bis in einen hohen Frequenzbereich bis 10 GHz belastbar. Power SMP RF coaxial connectors have been designed for applications up to GHz continuous power, e.g. board-to-board connections in base stations, or board-to-cable connections in power amplifier filter units. Die Serie - Power SMP - ist konzipiert für Anwendungen, bei denen Dauerleistungen bis GHz gefordert sind, z. B. Board-to-Board-Steckverbindungen in Basisstationen oder Übergänge von Leiterplatte auf Kabel in Leistungsverstärker-Filterverbindungen. PCB connectors SMD and also pin-in-paste types - are available as limited detent or smooth bore types. PCB-Typen SMD- und Pin-in-paste-Bauformen sind als - und -Ausführungen erhältlich.

2 Features Interface according to Rosenberger series Frequency range DC to 10 GHz Return loss (cable connector straight) 32 db (typ.) Power handling (continuous) GHz Impedance 50 Ω Minimum board-to-board distance 12.6 mm Axial misalignment ± 1 mm Radial misalignment 4 Snap-on coupling

3 6P- SMP Interface Dimensions Code 119 REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene D D MALE Stecker FEMALE Kuppler Male Stecker Female Kuppler dimension [mm] min. max. min. max. min. max. D Features Interface according to Rosenberger series Frequency range DC to 10 GHz Return loss (cable connector straight) 32 db (typ.) Power handling (continuous) GHz Impedance 50 Ω Minimum board-to-board distance 12.6 mm Axial misalignment ± 1 mm Radial misalignment 4 Snap-on coupling Product Range Cable connectors Panel connectors PCB connectors (SMD versions) Adaptors Further connectors available on request 66 Rosenberger Hochfrequenztechnik GmbH & Co. KG, POB 1260, D Tittmoning, Tel , Fax ,

4 Technology Technical Data Code 119 Applicable standards Anwendbare Normen Interface according to Interface gemäß Quality tested according to Qualitätsprüfung gemäß Electrical data Elektrische Daten Rosenberger MIL-STD-202 Impedance Wellenwiderstand Frequency range Frequenzbereich Return loss (cable connector straight) Rückflussdämpfung (Kabelsteckverbinder gerade) Insertion loss Dämpfung Insulation resistance Isolationswiderstand Center contact resistance Übergangswiderstand Innenleiter Outer contact resistance Übergangswiderstand Außenleiter Test voltage Prüfspannung Working voltage Betriebsspannung Power handling Leistungsbelastbarkeit Contact current Kontaktstrombelastbarkeit RF leakage Schirmdämpfung Intermodulation 3rd order Intermodulation 3. Ordnung Mechanical data Mechanische Daten 50 Ω DC to 10 GHz 32 DC to 3 GHz 26 3 GHz to 6 GHz 0.03 x f (GHz) db 5 GΩ 3 mω 2 mω 1000 V rms 480 V rms GHz 1.2 A DC 0 DC to 1 GHz 160 dbc (2 x 43 dbm) Mating cycles Steckzyklen Full detent: 100 : 500, Catchers mitt: 1000 Center contact captivation Innenleiter Haltekraft Engagement force Steckkraft Disengagement force Ziehkraft Board-to-board distance (min.) Board-to-Board Abstand (min.) Environmental data Umweltdaten axial: N Full detent: 68 N : 45 N, Catchers mitt: 10 N Full detent: 25 N : 15 N, Catchers mitt: 2.2 N 12.6 mm Temperature range Temperaturbereich -65 C to +165 C Thermal shock Temperaturzyklen Corrosion resistance Korrosionsbeständigkeit MIL-STD-202, Method 10, Condition B MIL-STD-202, Method 101, Condition B Moisture resistance Feuchtigkeitsbeständigkeit MIL-STD-202, Method 106 Vibration Vibration Max. soldering temperature (PCB connectors) Maximale Löttemperatur (Leiterplattensteckverbinder) Materials Materialien MIL-STD-202, Method 204, Condition B IEC , +260 C for 10 sec. Spring loaded contact parts Federnde Kontaktteile Center contact Innenleiter Outer contact Außenleiter Crimping ferrule Crimphülse Dielectric Dielektrikum Rosenberger-connectors fulfill in principle the indicated data of the Technical Data. Individual values of connectors may deviate depending upon application, design, type of cable, assembly method and execution. Specific data sheets for particular products can be provided on request from your Rosenberger sales partner. CuBe, Au plating CuZn, Au plating CuZn, Au / white bronze plating Copper alloy, Au / white bronze plating PTFE / PEEK / LCP Rosenberger-Steckverbinder erfüllen grundsätzlich die in den Technischen Daten angegebenen Daten. Je nach Anwendung, Bauart, Kabeltyp, Montageart und -ausführung können einzelne Werte von Steckverbindern hiervon abweichen. Spezifische Datenblätter zu einzelnen Produkten erhalten Sie auf Anfrage von Ihrem Rosenberger-Ansprechpartner. 6

5 Cable Connectors - Semi-Rigid Cables Straight Jack, solder Semi-Rigid Cables xordering Number Cable Group Assembly Instruction Packing Unit x119 K N E ø.5 Right Angle Jack, solder Semi-Rigid Cables xordering Number Cable Group Assembly Instruction Packing Unit x119 K N C ø.5 x119 K N C ø.5 Cable Connectors - Flexible Cables Right Angle Jack, solder crimp Flexible Cables xordering Number Cable Group Assembly Instruction Crimp Inserts Packing Unit x119 K 20-3Y8 N5 Y8 119 B 11 W

6 Panel Connectors Panel Connectors - Coaxial End Panel Plug, hexagonal flange Coaxial End xordering Number Remarks Panel Piercing / PCB Layout Packing Unit x119 S N5 x119 S N5 Panel feed through Panel feed through M x 0.5 M x ø 1.2 SW 8 69

7 PCB Connectors PCB Connectors - SMD Straight Plug, PCB SMD xordering Number Remarks Panel Piercing / PCB Layout Packing Packing Unit x119 S M L5 B 126a x119 S M L5 B 126a x119 S M L5 B 120b VG M tape & reel x119 S M L5 B 120b VG M tape & reel x119 S M L5 B 126a x119 S 14-40M L5 B 120b 6.25 x119 S M L5 x119 S M L5 x119 S M L5 x119 S M L5 Pin-in-paste Pin-in-paste Pin-in-paste Pin-in-paste B 126b B 126b B 120c B 120c Right Angle Plug, PCB SMD xordering Number Remarks Panel Piercing / PCB Layout Packing Packing Unit x119 S M L5 x119 S M L5 a =.5 mm a = 8.5 mm B 125d VG 10.02M tape & reel B 125e a x119 S M L5 B 18b x119 S M L5 B 19 VG tape & reel

8 Adaptors Adaptors Bullet female-female xordering Number Nominal Board-to- Bullet Length 2) Minimum Board-to- Board Distance 1) Board Distance 3) Maximum Radial Tolerance 4) Packing Unit x119 K 101-K00 N mm a=10.00 mm mm 0.0 mm 100 x119 K 106-K00 N mm a=20.65 mm mm 5) 100 x119 K 10-K00 N mm a=23.80 mm mm 5) 100 x119 K 108-K00 N mm a=31.20 mm mm 5) 100 x119 K 104-K00 N mm a=33.90 mm mm 5) 100 ø 4.5 a 1) When standard SMD-connectors are applied (e.g. 119 S , 119 S M,...). 2) Bullets with special lengths on request. 3) Applying radial misalignment increases the minimum board-to-board distance in vertical direction by max. 0.2 mm. Please note: Solder paste thickness not included. 4) The maximum radial tolerance compensation is calculated by: sin(4 ) x bullet length. Please note that the maximum possible misalignment of the axes to each other, as well as the maximum capture area of the PCB connectors (smooth bore types) have an impact on the quality and performance of the high frequency connection. 5) The maximum radial tolerance is limited to the second PCB connector and can vary between 1.3 mm and 2.1 mm. Adaptors (Inter Series) xordering Number Version Remarks x119 S 132-S00 S5 straight male - SMA male 23.2 ø 9 x119 S 132-K00 S5 straight male - SMA female 22.3 ø 9 x119 K 132-S00 L5 straight female - SMA male 23.2 ø 9 x119 K 132-K00 L5 straight female - SMA female 22.3 ø 9 x119 K 153-K00 L5 straight female - N female 2.5 ø 16 1