1 Access to remote DVR from IE CONTENT... 2 Preface Introduction System requirement and executing environment Supported operating System: Hardware requirement (recommend): Web bandwidth requirement: IE configuration Login to the remote DVR server through IE browser Live view and control of the remote server remote live viewing P.T.Z. control function image control function Picture local saved path and record local saved path Remote client OSD Search, playback and backup remote recordings Searching and downloading recordings playback recordings Alarm event monitoring About Logout / 10
2 Access to remote DVR from IE Preface You can access to remote DVR with remote surveillance without a client software installed. Our DVR supports web control. The main function of IE control is to view the remote live, playback and backup remote recordings, view and export remote server s logs, etc. This manual will help you to familiarize with the IE controller and master its operation methods. Notice: A. As product update, the contents of this manual are subject to change without notice. B. Some part functions and symbols may not be completely same with what you get due to the continuous revision of this software. 1. Introduction To use web controller you have to use IE connect to DVR to download and install the ActiceX controls for remote controlling the DVR. The IE controller designed for embedded digital video recorder to realize remote surveillance management. In the video surveillance system, the administrator can control PTZ, etc through configuring parameters, viewing the live site to achieve the purpose of live site surveillance, video record and record file backup and so on. It possesses three main functions: preview the live site, system configuration and video search. DVR supports multi-users logging in and operating the network client synchronously. 2. System requirement and executing environment 2.1. Supported operating System: Windows 2000/2003/XP/vista(Need Microsoft.NET Framework 4.0 or later version installed); windows 7; 2.2. Hardware requirement (recommend): CPU: Intel Core 2 Duo 2.4 or above. Memory: 2GB or above. Graphics card: independent 128M graphics card or above. Network card: 10/100/1000M Web bandwidth requirement: To obtain smoother A/V playing effect, the minimum web bandwidth requirement is: Main stream connection needs 333 Kbps/channel at least; Secondary stream connection needs 44 Kbps/channel at least. 3. IE configuration You have to configure the safety certificate of your IE browser before connect to the remote DVR. 2 / 10
3 Operation steps: (1) Double-click the IE browser icon to open the IE browser. (2) Select tools > Internet Options in the menu bar to pop up internet options window. (3) Click security tab, then click custom level in security level for this zone to open security settings window. (4) Enable the options which relate with ActiveX controls under the security settings window. (5) Click ok button. Figure 3 4. Login to the remote DVR server through IE browser (1) Input IP/domain of the DVR in IE textbox, then press enter button. (2) Install ActiveX controls automatically. (3) After the ActiveX controls installed the login window will be display in the IE browser. (4) Input the user name, password and control port then click on the login button to access to remote DVR. 3 / 10
4 Figure 4 5. Live view and control of the remote server Figure 5 4 / 10
5 5.1. remote live viewing (1) Camera list camera list of the remote server. Click the icon to connect to live view of a camera with default stream (Main Stream). Click the icon to connect to live view of a camera with Main Stream/Extra Stream. (2) Open All start/stop live view of the remote cameras in the list. (3) Start Dialog to activate/deactivate tow way real-time talk communication with the connected remote DVR. (4) Local Play playback local saved video files. (5) Refresh refresh the camera list. (6) Screen layout - Switch from 1, 4, 9, 16, 36 etc. channel views. Simply click on your selected layout to change the layout. (7) Screen live view screen. (8) INFO display the information of device IP, camera number and live bit stream. (9) Operation of the live view. (9.1) Digital zoom - Click this button and then left drag the mouse in the live screen to zoom in your drag zone. Right click live screen to restore original image. (9.2) Change show mode - switch to full screen mode. (9.3) Local record - To manually start recording live stream, the recording video will be saved in the path of video local folder. (9.4) Capture picture - To capture an image of the display screen, the image will be saved in the path of local folder. (9.5) Audio Turn on/off audio. (9.6) Close Video Disconnect live view of the remote camera P.T.Z. control function (10) Pan/Tilt buttons Pans/Tilts camera (11) Pan/Tilt Speed Adjusts pan/tilt speed (12) Zoom Control Zooms In/Zooms Out (13) Focus Control Adjusts focus (14) Iris Control Adjusts amount of light entering the camera (15) Advanced P.T.Z operation 5.3 image control function (16) Via Image Control (Color tab), you can change brightness, contrast, saturation and hue settings of the cameras currently displayed. Simply click on or to increase or decrease the selected image control option on the cameras currently displayed. Click the Reset button to return settings to the factory default settings for all cameras. 5 / 10
6 Figure Picture local saved path and record local saved path (17) Click More tab to setup the local storage path of the capture pictures and recordings. Click Reboot to restart the remote device. Figure Remote client OSD (18) Time displays the current date and time of the DVR Server the Remote Client is connected to. (19) Channel name Indicates camera label/channel name. 6. Search, playback and backup remote recordings 6.1. Searching and downloading recordings Figure 6.1 (1) SEARCH button click SEARCH button to popup search widows. 6 / 10
7 (2) Type recording type selector. Select a recording type you want to search/playback. Record - general recordings. Alarm - alarm recordings. Local local saved recordings. (3) Parameter select start time, end time and channel you want to search/playback. (4) Operation (4.1) Search start searching. (4.2) Playback playback the recording you want to search. (4.3) Download download the recordings storage in remote device into local storage device. (4.4) Open local record. (5) Recordings list list the recordings according to your searching results. (6) Prev/Next Page turn to previous/next page of the recording list. (7) Download Rate indicate the file download processing playback recordings Click Playback button or Open Local Record button to enter recordings playback windows Figure (1) Playback screen display the remote server recordings. (2) Operation of the playback screen. (2.1) Digital zoom - Click this button and then left drag the mouse in the live screen to zoom in your drag zone. Right click live screen to restore original image. (2.2) Change show mode - switch to full screen mode. (2.3) Local record - To manually start recording live stream, the recording video will be saved in the path of video local folder. (2.4) Capture picture - To capture an image of the display screen, the image will be saved in the path of local folder. 7 / 10
8 (2.5) Audio Turn on/off audio. (2.6) Close Video Disconnect live view of the remote camera. (3) Screen layout - Switch from 1, 4, 9, 16, 36 etc. channel views. Simply click on your selected layout to change the layout. (4) Playback processing bar indicates the percentage of the playing back recording of the remote server. Click on the slide button to move the playback processing. (5) Playback operation (5.1) Play - start playback remote/local recording. (5.2) Pause - start/pause playback remote/local recording. (6) Stop - stop playback. (7) SF slow forward, decrease the playback speed. Support video playback in 1/2,1/4 and 1/8 speed switch in turn. (8) FF - slow forward, increase the playback speed. Support video playback in 1/8, 1/4, 1/2, normal, 2, 4 and 8 speed up switch in turn. 7. Alarm event monitoring Figure 7 (1) ALARM click alarm button to enter Alarm windows. (2) Event type select the alarm event type to monitor. Event type include video loss, motion detect, disk full, disk error, external alarm and video mask. (3) Operation operations when alarm events occur. Listen Alarm web will notify user when alarm occur. Video Pop-up popup the video monitor when alarm occur. Prompt popup the notification box when alarm occur. (4) Alarm Sound enable/disable playing notification sound. (5) Event list list all alarm event you monitoring. 8 / 10
9 8. About Click about button to display the version information of the web controller. 9. Logout Click logout button to logout from the remote device and return to login windows. 9 / 10
Table of Contents Table of Contents Product Overview...5 System Requirements... 5 Introduction...6 Features... 6 Installing Your IP Camera... 7 Software Installation...8 Add Camera(s)...13 D-ViewCam Interface
DS-7208&7216HVI-S Series Embedded Net DVR USER S MANUAL Hikvision Network Digital Video Recorder User Guide Copyright 2010, Hikvision, Ltd. All rights reserved. This document may not be copied in whole
Digital Video Recorder User Manual (V2.2.4) UD.6L0202B0068A02 Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device,
Digital Video Recorder User Manual (V2.2.3) UD.6L0202D1018A01 eohikvision Network Digital Video Recorder User s Manual This manual, as well as the software described in it, is furnished under license and
Digital Video Recorder User Manual UD.6L0202D1623A01 Hikvision Network Digital Video Recorder User Manual This manual, as well as the software described in it, is furnished under license and may be used
User Manual Model: FI9821W Indoor HD Pan/Tilt Wireless IP Camera Black White Table of Contents 1 Overviews... 2 1.1 Key Features... 3 1.2 Read Before Use... 3 1.3 Packing Contents... 4 1.4 Physical Description...
Model: FI8908/FI8908W IP Wireless / Wired Camera NIGHT VISION & REMOTE PAN / TILT ROTATE/ TWO WAY AUDIO User Manual Color: Black Color: White CONTENTS 1 WELCOME...1 1.1 Features...1 1.2 Packing List...2
Grandstream Networks, Inc. GXV3662 User Manual Safety Instructions These instructions are intended to assist users with the operation of the GXV3662 and also to instruct on how to avoid dangerous situations
Version 1.0 01/15/2013 User Manual Wireless N H.264 Day/Night Network Camera DCS-933L Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without
BC-5010 / BC-5010-IVS 5-Mega Pixel Box Type PoE IP Camera 5-Mega Pixel Box Type PoE IP Camera with Video Analytics User s Manual Copyright and Disclaimer Copyright & Disclaimer No part of this publication
GE Healthcare Life Sciences UNICORN start 1.0 User Manual Table of Contents Table of Contents 1 Introduction... 1.1 Important user information... 1.2 User documentation... 1.3 UNICORN start overview...
CLASSROOM MANAGEMENT SYSTEM USER MANUAL Manual COPYRIGHT 2007. All rights reserved. Program COPYRIGHT 2007. All rights reserved. Contents 1 Introduction 2 System Requirements 3 Installation 4 Startup 4.1
MD-3025/MD-3025-IVS 3-Megapixel IR Vandal Mini Dome IPCAM / 3-Megapixel IR Vandal Mini Dome IPCAM with Video Analytics User s Manual Copyright and Disclaimer Copyright & Disclaimer No part of this publication
Iomega EZ Media and Backup Center User Guide Table of Contents Setting up Your Device... 1 Setup Overview... 1 Set up My Iomega StorCenter If It's Not Discovered... 2 Discovering with Iomega Storage Manager...
Total Connect TM 2.0 Online Help Guide Hints for use: When viewing in a web browser, hit F11 to toggle full screen mode. Use the bookmarks panel or table of contents to jump to the desired topic. Select
NICE Inform TM Version 3.0 User Guide June 2009 OM812-101-03-00-03-00ENG Insight from Interactions TM This page is left intentionally blank for double-sided printing. NICE Systems Ltd. shall bear no responsibility
User Manual OMNINAS KD20 CHAPTER TITLE TABLE OF CONTENTS TABLE OF CONTENTS Product Overview Features................................. 1-2 Package Contents........................... 1-2 System Requirements........................
AKOYA INSTALLATION TECHNICAL REQUIREMENTS INTERNET EXPLORER CONFIGURATION FOR AKOYA.NET 1. TURN OFF UAC SETTINGS Before making the following changes in Internet Explorer, you must be a local administrator
V46.01 Model: FI8918W Quick Installation Guide Indoor Pan/Tilt Wireless IP Camera Black White For Windows OS ------- Page 1 For MAC OS ------- Page 11 ShenZhen Foscam Intelligent Technology Co., Ltd Quick
USER GUIDE Note: 1. PROLINUX is a DHCP client and is set to auto mode by default. 2. Default IP:192.168.1.251 Port:6666 3. Default UI account: sysadmin 4. Default UI password: sysadmin1234 1 TABLE OF CONTENTS
TeamViewer 7 Manual Meeting TeamViewer GmbH Kuhnbergstraße 16 D-73037 Göppingen www.teamviewer.com Table of contents 1 About TeamViewer... 5 1.1 About the software... 5 1.2 About the manual... 5 2 Basics...
MODEL ATC-2004 TCP/IP TO RS-232/422/485 CONVERTER User s Manual 1.1 Introduction The ATC-2004 is a 4 Port RS232/RS485 to TCP/IP converter integrated with a robust system and network management features
FileMaker Server 13 FileMaker Server Help 2010-2013 FileMaker, Inc. All Rights Reserved. FileMaker, Inc. 5201 Patrick Henry Drive Santa Clara, California 95054 FileMaker and Bento are trademarks of FileMaker,
TeamViewer 7 Manual Remote Control TeamViewer GmbH Kuhnbergstraße 16 D-73037 Göppingen www.teamviewer.com Table of Contents 1 About TeamViewer... 5 1.1 About the software... 5 1.2 About the manual... 5
Dual Bay Home Media Store User Manual CH3HNAS2 V1.0 CONTENTS Chapter 1: Home Page... 3 Setup Wizard... 3 Settings... 3 User Management... 3 Download Station... 3 Online User Manual... 3 Support... 3 Chapter