Remote Client Program Web Client... 39

Transcription

1 Remote Client / Web Client USER MANUAL T Series Digital Video Recorder

2 Remote Client Program... 3 Remote Client Program Installation... 4 Remote Client... 6 Main Window... 6 Site Registration... 7 Group Registration... 8 USER Registration System Setup Emergency Recording Setup Remote Client User Guide Main Window User Login Program Exit / Screen Minimize...15 Site Connection Remote Client Screen Search Window Remote Backup System Control Web Client Web Client Features Starting Remote Client Remote Client Screen Connection and Disconnection Surveillance Screen Channel Screen Sensor and Control Icons Camera Selection Icons PTZ Function RemoteClient Version

3 Remote Client Program Remote Client program allows user to monitor video, audio and event from remote location using a network MS-Windows based PC. Features Real time live image and audio Search and Playback Real time PTZ camera control System setup and configuration Emergency recording and backup RemoteClient Version

4 Remote Client Program Installation Remote Client program, NETINSTALL.EXE, is distributed on a CD. To install, follow the following steps. 1) Locate NETINSTALL.EXE on CD. Start the program 2) Next to proceed 3) Yes to start installation process 4) Accept the license agreement 5) Start Codec installation RemoteClient Version

5 6) Select New Installation 7) Select codec Warning: Windows Media Player Codec is AVI format and this codec must be needed to playback image that is in backup file. 8) Codec installation -> Continue 9) Remote Client program installation finished Remote Client is installed at : Start ( ) All Programs DVR Network To start remote client: Select Remote Surveillance RemoteClient Version

6 Remote Client Main Window Start program : Start ( ) Program DVR Network Remote Surveillance The following is the remote client window. Login: Click on icon Enter user id and password Default User Id: system Password: manager A DVR device/location is also referred to as a site. To connect to a site, site information must be registered to Remote Client program. RemoteClient Version

7 To register a site, click on setup icon to open the Configuration dialog window. Site Registration To register a site, o Select Site (Configuration Window) o o Enter site information Site Name: IP Address: Product Type: Channels: User Id Password Ports Select Add to register A name given to a site. IP address assigned to a DVR Select Embedded type for T Series Number of cameras supported by DVR User id to access DVR provided by administrator Password to verify user TCP/IP ports use for communication between Remote Client and DVR : Live Video : TCP 7302 : Live Audio : TCP 7303 : Search : TCP 7304 : Event : UDP 7305 : Control : TCP 7306 : Remote Backup : TCP 7307 : Two-way Audio : UDP If a DVR is behind a firewall, the following ports must be forwarded. RemoteClient Version

8 Group Registration With many cameras and many DVRs, grouping simplifies management of them. For example: Suppose there are three buildings, three DVRs and 48 cameras installed. We want to manage (view or not view) all outside cameras. First, create a group with unique name and register all outside cameras into that group. Then, when all outside cameras need to be viewed, select group and issue one command to connect to all cameras registered in the group. To create a group and register cameras, select Group in the configuration menu. To create a group 1) Select Add create new group Save after entering group name 2) Select create group RemoteClient Version

9 3) To add camera, double click on the first empty row 4) Select registered site 5) Select a camera RemoteClient Version

10 USER Registration To user Remote Program, users must be registered. To register a user, select User from the configuration menu. To add a new user : o Enter user information o Select Add button. To modify user information o Select a row containing user name (click on row) o Modify information o Select Add button To delete a user o Select a row containing user name o Select Delete button RemoteClient Version

11 System Setup The system setup configures Remote Client program. All information is local information for Remote Client program and its operation. (1) Version The current version of Remote Client program (2) Language The language used by Remote Client program. Current version supports: English, Spanish, Japanese, Korean, Chinese, Russian. (3) Connection The connection method describe how Method Remote Client program should be connecting to DVRs. Current version supports: LAN : network connection (4) Single Screen Display ISDN/MODEM : modem connection Full mode: Expand camera image to fit the whole display screen. View one camera at a time. Original mode: Displaying image size is same as the DVR s transmitted image size. Comment No modification Select from a list Select from a list Select one or the other. RemoteClient Version

12 (5) Event Pop Up When event occurs, Sensor is triggered, or Motion is detected by DVR Display camera (associated with sensor or motion) in full mode. (6) Alarm Sound When event occurs on DVR No warning sound, Beep with system beep sound, or Use user specified sound. For user specified sound, enter location of sound audio file. (7) Backup directories DVRs can be set up to backup (or make copy ) of data files at remote location automatically. If backup directories are specified in Remote Client, Remote Client will inform DVR that backup directories are specified. If a DVR is set up for recording (backing up) data at remote location, it will start as long Remote Client is active and running, Check one or both Warning: video data files are large. Emergency Recording Setup Emergency recording refers to unscheduled recording of video, triggered by monitoring personnel only those video and audio selected (and being viewed) on Remote Client. Emergency recording is triggered by pressing emergency button ( ) on the main Remote Client screen and stops when the button is pressed again (Toggled on and Toggled off). Note: Recording also stops if new connections are made to other sites, other cameras or Remote Client configuration is changed. Emergency recording will not occur is storage directories are not set. To register the emergency recording directories, select Record from the configuration menu. RemoteClient Version

13 (1) Select directory Use button to initiate MS Windows Explorer for selection of directory. Comment (2) Allocated size Set maximum storage size (in megabytes) for recording. (3) Add button Add the directory to the directory list for recording emergency videos (4) Apply Directory information can be modified. To modify, button Select registered directory from the list (6) Make changes Select Apply button Use scroll bar (5) Delete button (7) Automatically Delete Emergency recording directory can be removed from the list by Select registered directory from the list (6) Select Delete button RemoteClient Version

14 Remote Client User Guide Main Window Start program : Start Program DVR Network Remote Surveillance The following is the remote client window. RemoteClient Version

15 User Login To login: Enter user id and password Click on login icon ( ) Default User Id: system Password: manager Program Exit / Screen Minimize To exit program or minimize screen Click on power button Minimization It is located in the work list bar of window at the bottom of the screen by minimizing remote surveillance program window size. When surveillance screen is wanted, click remote surveillance program icon of the work list bar. Exit Finish remote surveillance program and terminate. Cancel Return to remote surveillance screen after cancellation. Site Connection For single site connection For group site connection Click on tab ( ) Click on tab ( ) RemoteClient Version

16 To connect 1) Select camera or group 2) Select connect button or Right click selected camera or group and select connect Connection status: Yellow Color: Connection ON No color: No connection Remote Client Screen Client Screen Site Name Camera Name Real Time Image Resolution Screen Divisions Different screen display divisions are available To select click on the one of division Possible screen divisions RemoteClient Version

17 Full screen mode Rotate screen Used when number of cameras connected are greater than number of displays screens To select a camera Selected camera is highlighted in red color. Click on button Click on button Click on button select next camera, or Click on the screen division with mouse. Screen Capture To capture current image This captures image of selected camera. Click on button Screen Swapping Screen swapping is simply a exchange of camera display position within the screen division Before Swap After Swap Select camera ( 1 ) and drag to target ( 2 ) division. Alarm Event RemoteClient Version

18 Emergency Recording To capture currently playing live video Click on button Captured video is stored in the predefined directories. On screen LIVE+REC will be displayed during emergency recording. Alarm sound To turn on or off alarm sound Alarm sound will occur when DVR sends event notice. Click on button Event: sensor triggered, motion detected Live Audio To turn on or off audio The sound captured at DVR is transmitted in real time if microphone is installed and audio is enabled at DVR. Click on button Note: Will hear audio of selected video channel. Will not play multiple audio channels. PTZ Camera Control To control a PTZ camera Select PTZ controller tab ( ) PTZ Control Tab Button functions (1) Select PTZ camera to control (2) Change camera direction (3) Zoom in/out surveillance screen (4) Zoom in/out camera focus (5) Control camera IRIS (6) Control camera light. (7) Control Iris. (8) Change direction automatically. (9) Control external connection items. RemoteClient Version

19 Search Window Video Search To change mode from live to search mode Search tab and Search Time bar will appear Click on tab Search Tab Using the buttons, video can be played forward and backward at a varying speed, including frame by frame search. Search Time Bar Recorded video is indicated by Green color on both calendar and time bar. Video can be selected by clicking date, hour and minutes. Video Search (Locally Recorded Data) Remote Client Program can also replay (search) locally recorded data from emergency recording or from backup. Locally recorded video can be replayed. To search or locally recorded video data, 1) Click on button. 2) Using MS Windows explorer, select directory where recording is stored. 3) If directory contains recorded or backed up data, the green bar will appear. 4) Select date, hour and minutes to replay RemoteClient Version

20 Re-Recording Video While video is being played back during search mode, emergency recording can be activated to record video being replayed. This may be useful when DVR s data is being replayed, as a mean to create a copy. Panoramic View A selected video channel can be replayed in a panoramic view. A panoramic view is a sequence of image frames displayed sequentially in a separate screen. For example, in a panoramic view of 16 screen divisions, 16 consecutive image frames of same camera is displayed. Following images depict 16 image frames displayed in a panoramic view. To start a panoramic view, 1) Select a camera 2) Click right mouse button 3) Select Panorama ON RemoteClient Version

21 Remote Backup Purpose of backing up the data is couple of fold: 1) Duplicated data is kept at physically different system, which may be at the same location or at different location. 2) Backup storage has a larger capacity and can preserve data for longer period of time. 3) Backup can be performed manually or automatically based on backup schedule. However, to perform backing up task over a network, sufficient network data band width must be available and to complete the backing up task completely, network and network connection must be stable. Remote backup set up requires o Defining backup device o Configuring backup schedule To define backup device 1) Select backup setup button The following screen will appear. Work List: Registered backup tasks. Work Details: Setup details of selected work in work list are shown. RemoteClient Version

22 Delete button: Select a backup task and delete HIDE button (covert button) Return to surveillance screen. Even though current backup work is continued. Start Button: Start selected backup task manually Stop Button: Terminate current backup task. 2) Select Add Task button This will bring up a task registration window 3) Add task name 4) Check backup mode 5) Select cameras to be backed up 6) Select type of data to be backed up 7) Set beginning and end date and time of data to be backed up. 8) Select type of data format 9) Define location of backup directory RemoteClient Version

23 System Control Remote surveillance program can be used to control and configure set selected DVR. To control and set site configuration, Click on tab on the main screen to open System Control Tab. System Control Tab Button for configuring Button for bi-directional (two-way) audio Button for emergency recording Set of buttons for sensor monitoring Active sensor will colored RED. Set of buttons for relay activation Clicking on a button will activate a relay. NOTE: For detail descriptions of features and functions listed in this section, REFER TO SYSTEM CONFIGURATION MANUAL. RemoteClient Version

24 Site (DVR) Setup To configure DVR Click on Tab. button on System Control The following screen will appear It has menu for system setup device setup network setup system update Site (DVR) / Information Setup Title: Control ID: Alpha blend: Language: Version: Signal type: Name of DVR Remote controller ID OSD blending OSD & UI language DVR firmware version Camera signal type Read only Read only Read only Read only RemoteClient Version

25 Site (DVR) / Time Setup Time Zone: Date Format: Date: Time: Holidays: Time sync: Time zone relative to GMT Date format used by DVR Current Date Current Time Holidays (user defined) Automatic time sync - server Read only Read only RemoteClient Version

26 Site (DVR) / User Setup User Name User ID Password P/W Confirm Authority Name of a user ID of a user Password of a user Password of a user Access permission for DVR features Read only Confirmation RemoteClient Version

27 Device / Camera Setup Enable Popup Camera Title Frame Rate Image Quality PTZ Module PTZ Address PTZ Communication Image control Enable or disable camera Full screen mode on event Camera name Maximum recording rate MPEG4 image quality PTZ Protocol Address Communication parameters Brightness, Contrast, Hue RemoteClient Version

28 Device / Audio Setup Audio Channel # Connected Camera Available audio channel Camera associated with audio channel View only RemoteClient Version

29 Device / Alarm Setup Sensor Motion Video Loss System Sensor input enable / relay Motion detection Loss of video signal System events RemoteClient Version

30 Device / Display Setup OSD Main monitor rotation Spot monitor rotation Text overlay of information RemoteClient Version

31 Record / Schedule Setup Camera selection Recording mode Weekly Schedule RemoteClient Version

32 Record / Recording Setup Resolution Mode Pre Alarm Post Alarm Override Image capture size Recording mode Prerecording Post recording This setting is precedence RemoteClient Version

33 Network / IP Setup Network type TCP/IP xdsl Connection method between DVR and network All can be changed RemoteClient Version

34 Network / Notification Setup Enable Receiver Sender Server Authentication / Use Account Password Enable / Disable event notification address receiver address sender server Use/Not use user authentication User id on server User password All can be changed RemoteClient Version

35 Network / WEB Setup Enable Web port Enable or disable web viewer HTTPd port RemoteClient Version

36 Network / DDNS Setup Use ddns Site ID Password Use / Not use DDNS service DDNS server site DDNS server user id DDNS server user password RemoteClient Version

37 Network / Event Notification Setup Use IP Address Send event notification IP Address of system where Remote Client program is running RemoteClient Version

38 Update / System program (firmware) File name Property Select File Windows explorer for selecting update file (See below) RemoteClient Version

39 Web Client RemoteClient Version

40 Web Client Features Web surveillance program can connect to DVR with internet web browser only without any special program and process following functions. Real Time image surveillance function Real Time audio function Real Time image search function Real Time PTZ control function Real Time sensor surveillance function To use web client, DVR must be configured to allow web interface. Please contact your DVR administrator. Starting Remote Client Static IP Connection Enter IP Address in the address bar of web browser. Dynamic IP Connection Enter domain name in the address bar of web browers. To obtain IP address of DVR or DDNS domain name, Please contact your DVR administrator. RemoteClient Version

41 Remote Client Screen This screen will show when web access is enabled in DVR. RemoteClient Version

42 Connection and Disconnection To use (live view or search) a DVR, a user must be logged on and connection must be made. To login in Login Screen 6) Select button. ID: User id Password: User password Guest mode: login without id Real time: Search: Live viewing Search recorded video Search time: Date and time of recorded video to be searched To logout 1) Select button. Note: In search mode, video will be played from the date and time specified. Date or time change, fast forward or reverse features are not available. RemoteClient Version

43 Surveillance Screen Channel Screen Sensor and Control Icons Sensor and control icons Red : when active Blue: when inactive Camera Selection Icons Camera Icons Red : when selected Blue : Not selected PTZ Function Active only if: o Camera is selected (Red bounding box around screen), o Selected camera is a PTZ camera, and o User has permission to control the camera. RemoteClient Version

44 Manual_Version 2.00( ) 44 T Series