Interoperability List IEC REG-P. Creation Date: 28/04/2003 Release Date: 21/05/2013 Release: V1.4
|
|
|
- Verity Rodgers
- 8 years ago
- Views:
Transcription
1 Interoperability List IEC REG-P g Creation Date: 28/04/2003 Release Date: 21/05/2013 Release: V1.4
2 We take care of it. History of document Author Department Phone Version Date Wolfgang Borchers Fa. TELE-DATA (+49) (0) V0.1 28/04/1999 Wolfgang Borchers Fa. TELE-DATA (+49) (0) V1.0 28/08/2003 Wolfgang Borchers Fa. TELE-DATA (+49) (0) V1.1 03/02/2002 Wolfgang Borchers Fa. TELE-DATA (+49) (0) V1.2 16/05/2013 Distribution list Name Department Location Phone Mr. Schobert a.eberle Nuremberg (+49) (0) Mr. Haussel a.eberle Nuremberg (+49) (0) Mr. Straussberger a.eberle Nuremberg (+49) (0) Mr. Sybel a.eberle Nuremberg (+49) (0) The persons responsible for establishing the agreed contents of this document are: Name Department Location Phone Signature Date Mr. Borchers Nuremberg (+49) (0) /06/2013 The persons responsible for establishing this document are: Name Department Location Phone Signature Date Mr. Sybel a.eberle Nuremberg (+49) (0) Mr. Straussberger a.eberle Nuremberg (+49) (0) Page 2
3 Document changes/updates (The overview contains only the changes concerning the released/distributed document) Changed chapters /pages Responsibility Version Reason of change / change request All chapters Borchers 1.0 Review All chapters Borchers 1.1 Baud rate corrected, increased set-point types, measurand type 11 and 12, new company profile LEREF "Verzeichnis Ueberschrift" \* MERGEFORMAT Index Fehler! Verwenden Sie die Registerkarte 'Start', um Verzeichnis Ueberschrift Page 3
4 We take care of it. 1 Interoperability list Physical Iayer Electrical Interface Optical interface Transmission speed Application Iayer Transmission mode for application data COMMON ADRDESS of ASDU Selection of standard information numbers in monitor direction Selection of standard information numbers in control direction Basic application functions Miscellaneous Page 4
5 1. Interoperability list 1.1 Physical Iayer Electrical Interface EIA RS-485 EIA RS mA Optical interface Glass fibre Plastic fibre,please order separately F-SMA type connector ST type connector Transmission speed 100 bit/s 200 bit/s 300 bit/s 600 bit/s 1200 bit/s 2400 bit/s 4800 bit/s 9600 bit/s bit/s LEREF "Verzeichnis Ueberschrift" \* MERGEFORMAT Index Fehler! Verwenden Sie die Registerkarte 'Start', um Verzeichnis Ueberschrift Page 5
6 We take care of it. 1.2 Application Iayer Transmission mode for application data Mode 1 (least significant octet first), as defined in 4.10 of IEC , is used exclusively in this companion standard COMMON ADRDESS of ASDU One COMMON ADDRESS OF ASDU (identical with station address) Selection of standard information numbers in monitor direction System functions in monitor direction INF Semantics <0>:= End of general interrogation <1>:= Time synchronization <2>:= Reset FCB <3>:= Reset CU <4>:= Start/restart <5>:= Power on Status indications in monitor direction INF Semantics <16:= Auto/Man, Rückmeldung Hand/Auto <17:= Teleprotection active <18:= Protection active <19:= LED reset <20:= Monitor direction blocked <21:= Test mode <22:= Local parameter setting <23:= Characteristic 1 <24:= Characteristic 2 <25:= Characteristic 3 <26:= Characteristic 4 <27:= Auxiliary input 1 <28:= Auxiliary input 2 <29:= Auxiliary input 3 <30:= Auxiliary input 4 <31:= running tap, Lauflampe Page 6
7 Supervision indications in monitor direction <32:= 24V Automat <34:= Lauflampe MaxZeit <35:= Parallelprogramm läuft j/n <36:= >U j/n <37:= <U j/n <38:= Schnellschaltung j/ <39:= Auslösung j/n <40:= Stillsetzung j/n <47:= Group a!arm Fault indications in monitor direction <44>:= U > <45>:= U < <46>:= I > <49>:= Error regulator <50>:= Verzögerungsart linear/integral <51>:= Regelverzögerung2 ein/aus <52>:= Anzeige V/kV <53>:= Meßschaltung A/C <54>:= Stufenstellung / Tap position (wird im Meßwertblock übertragen) REG-P specifics in control direction <55:= Rated value 1, Sollwert 1 <56:= Rated value 2, Sollwert 2 <57:= Rated value 3 <59:= <60:= Delay 1 <61:= Delay 2 <62:= U < LEREF "Verzeichnis Ueberschrift" \* MERGEFORMAT Index Fehler! Verwenden Sie die Registerkarte 'Start', um Verzeichnis Ueberschrift Page 7
8 We take care of it. Fault indications in monitor direction <64>:= U> <65>:= Überspannung max. <66>:= Unterspannung max. <67>:= Schnellregelung rück <68>:= Schnellregelung vor <69>:= Kreisblindstrom max. <70>:= <71>:= <72>:= K-factor <73>:= Factor adjust-kv <74>:= UX <75>:= UR <76>:= Loadshedding 1 <77>:= Loadshedding 2 <78>:= Loadshedding 3 <79>:= <80>:= Zone 3 <81>:= Zone 4 <82>:= Zone 5 <83>:= Zone 6 <84>:= General start/pick-up <85>:= Breaker failure <86>:= Trip measuring system L 1 <87>:= Trip measuring system L 2 <88>:= Trip measuring system L 3 <89>:= Trip measuring system E <90>:= Trip I> <91>:= Trip I>> <92>:= rip IN> <93>:= Trip IN>> Page 8
9 Auto-reclosure indications in monitor direction <128>:= CB on' by AR <129>:= CB on' by long-time AR <130>:= AR blocked Measurands in monitor direction <144>:= Measurand <145>:= Measurands I, V <146>:= Measurands l, V, P, 0 <147>:= Measurands I N. V EN <148>:= Measurands I L1,2,3, V L1,2,3, P, Q,f Generic functions in monitor direction <240>:= Read headings of all defined groups <241>:= Read values or attributes of all entries of one group <243>:= Read directory of a single entry <244>:= Read value or attribute of a single entry <245>:= End of general interrogation of generic data <249>:= Write entry with confirmation <250>:= Write entry with execution <251>:= Write entry aborted LEREF "Verzeichnis Ueberschrift" \* MERGEFORMAT Index Fehler! Verwenden Sie die Registerkarte 'Start', um Verzeichnis Ueberschrift Page 9
10 We take care of it Selection of standard information numbers in control direction System functions in control direction INF Semantics <0>:= lnitiation of general interrogation <0>:= Time synchronization General commands in control direction INF Semantics <16>:= Auto/Man, Umschaltung Hand / Auto <17>:= higher tap, Trafo höher <18>:= lower tap, Trafo tiefer <55>:= Rated value 1 select, Sollwert1 aktivieren <56>:= Rated value 2 select, Sollwert2 aktivieren <57>:= Rated value X select, X= 1..4, Sollwertanwahl als Messwert <65>:= Grenzwert Überspannung Basic application functions Test mode Blocking of monitor direction Disturbance data Generic services Private data Miscellaneous Measurands are transmitted only in case of a modification of any measurand of described block. Page 10
11 Page 11
12 A. Eberle GmbH & Co. KG Frankenstraße 160 D Nuremberg Germany Tel.: +49 (0) 911 / Fax: +49 (0) 911 / info@a-eberle.de Software - Version: Copyright 2013 by A. Eberle GmbH & Co. KG Subject to change without prior notice. REG-PE(D) Interoperability List IEC
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60870-5-103 First edition 1997-12 Telecontrol equipment and systems Part 5-103: Transmission protocols Companion standard for the informative interface of protection equipment
Voltage Regulator SPAU 341 C. Product Guide
Issued: July 1998 Status: Updated Version: D/25.04.2006 Data subject to change without notice Features Comprehensive voltage regulation for power transformers with on-load tapchangers in distribution substations
GPS satellite receiver for world wide application
Operating manual GPS satellite receiver for world wide application Versions: Article Number Auxiliary Voltage Interface 111.9024.45 H1: AC/DC 88V...264V D2: RS485 111.9024.46 H2: DC 18V...72V D2: RS485
Special Publication. Operation and Monitoring of MSCDN-Systems
Special Publication Operation and Monitoring of MSCDN-Systems The popularity of Mechanical Switched Capacitor with Damping Network (MSCDN) systems in German transmission grid is growing massively. This
INDEX. IEC 60870-5-104 Controlled Station Interoperability com.tom WEB-PLC 8.0.2
INDEX 1 Interoperability... 2 2 History... 2 3 IEC 60870-5-104 Interoperability... 3 3.1 System or Device...3 3.2 Network Configuration...3 3.3 Physical Layer...3 3.3.1 Transmission speed...3 3.4 Link
SAGE Sistema Aberto de Gerenciamento de Energia. Documento de Interoperabilidade do Protocolo IEC/60870-5-104 no SAGE
Documento de Interoperabilidade do Protocolo IEC/60870-5-104 no SAGE OUTUBRO 2008 Documento de Interoperabilidade 1 System or/and Device (system-specific parameter, indicate definition of a system or a
Trip circuit supervision relay. Type RXTCS
Trip circuit supervision relay Type RXTCS ABB a global technology leader ABB is a global leader in Power and Automation technologies that enable utility and industry customers to improve performance while
CONFIGURABLE SAFETY RELAYS
MSI-m/R, MSI-mx/Rx Configurable MSI Safety Relay with function for efficient material flow in a packaging application Special features Sequential or Parallel with automatic mode detection MSI-mx for separate
Secure My-d TM and Mifare TM RFID reader system by using a security access module Erich Englbrecht (info@eonline.de) V0.1draft
Application Report Secure My-d TM and Mifare TM RFID reader system by using a security access module Erich Englbrecht (info@eonline.de) V0.1draft Embedded RF ABSTRACT This application report describes
SCADAPack E IEC 60870-5 Interoperability Profile Documents
SCADAPack E IEC 60870-5 Interoperability Profile Documents 2 SCADAPack E IEC 60870-5 Interoperability Profile Documents Table of Contents Part I IEC 60870-5-101 Slave Interoperability Profile Document
Substation Automation Products Relion 670/650 series IEC and ANSI Hardware
Substation Automation Products Relion 670/650 series IEC and ANSI Hardware ABB Group 1MRG014097 October 2013 Relion 670/650 series hardware Contents Relion 670/650 series Relion Hardware Relion Common
FACTORY AUTOMATION MANUAL ID-NET SETUP PROCEDURE USING PROGRAMMING BARCODES
FACTORY AUTOMATION MANUAL ID-NET SETUP PROCEDURE USING PROGRAMMING BARCODES ID-NET SETUP PROCEDURE USING PROGRAMMING BARCODES With regard to the supply of products, the current issue of the following document
KNX Panasonic Air Conditioners
IntesisBox KNX Panasonic Air Conditioners Gateway for Panasonic ECOi and PACi system integration into KNX networks Up to 30 Outdoor units Up to 64 Indoor units PA-AC-KNX-64/128 EIA485 U1U2 line U1U2 line
SUBJECT: APPENDIX A2: MESSAGES PER BUSINESS DOMAIN DDNEA FOR EMCS PHASE 3 (ECP3-FITSDEV3-SC01-DDNEA_P3_APP_A2)
OWNER: DG TAXUD ISSUE DATE: 06/03/2015 VERSION: 1.76-EN TAXATION AND CUSTOMS UNION DG EMCS COMPUTERISATION PROJECT PHASE 3 SUBJECT: APPENDIX A2: MESSAGES PER BUSINESS DOMAIN () FRAMEWORK CONTRACT TAXUD/2013/CC/121
CONFIGURABLE SAFETY RELAYS
MSI-s/R, MSI-sx/Rx Configurable MSI provide important functions for the efficient flow of automated production processes Special features Combined guarding types by connecting up to 4 AOPDs Additional
Current and voltage measuring relays
Current and voltage measuring relays RXIK 1, RXEEB 1 and Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice RXIK 1 RXEEB 1 (SE980082) (SE980081) (SE970869) Features Application
How To Configure An Iec 60870-5 (Runtu) For A Testnet (Rntu)
SCADAPack E IEC 60870-5-101/104 Slave Technical Manual 2 SCADAPack E IEC 60870-5-101/104 Slave Technical Manual Table of Contents Part I IEC 60870-5-101/104 Slave Technical 4 1 Technical... Support 4 2
Protection and Substation Automation. Training Programmes
Protection and Substation Automation Training Programmes Protection and Substation Automation Training Programme Overview The objective of the Training Program is to provide education and training to make
Rack mounted telephone- and leased line modem for industrial applications
Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as
IntesisBox Modbus Server SAMSUNG Air Conditioners
IntesisBox Modbus Server SAMSUNG Air Conditioners Gateway for monitoring and control of Samsung NASA compatible Air Conditioning Systems from any Modbus master device TCP or RTU (BMS, PLC, SCADA, HMI,
T 3000. Substation Maintenance and Commissioning Test Equipment
T 3000 Substation Maintenance and Commissioning Test Equipment Multi function system for testing substation equipment such as: current, voltage and power transformers, all type of protection relays, energy
Ethernet. Customer Provided Equipment Configuring the Ethernet port.
Installing the RDSP-3000A-NIST Master Clock. Ethernet Connect the RJ-45 connector to a TCP/IP network. Equipment The following equipment comes with the clock system: RDSP-3000A-NIST Master Clock Module.
User's Guide bintec R4100 / R4300 Serial Unit. Copyright July 17, 2006 Funkwerk Enterprise Communications GmbH Version 0.9
User's Guide bintec R4100 / R4300 Serial Unit Copyright July 17, 2006 Funkwerk Enterprise Communications GmbH Version 0.9 Purpose Liability Trademarks Copyright Guidelines and standards How to reach Funkwerk
..OR How To Protect your 3-Phase Equipment Investment with 3-Phase Monitors from Time Mark...
..OR How To Protect your 3-Phase Equipment Investment with 3-Phase Monitors from Time Mark... TIME MARK CORPORATION 11440 EAST PINE STREET TULSA, OK 74116 USA tel 918 438-1220 fax 918 437-7584 www.time-mark.com
IntesisBox KNX LG Air Conditioning
IntesisBox KNX LG Air Conditioning Gateway for integration of LG Air Conditioners with KNX control systems. 1. Main Features Direct connection to KNX TP-1 (EIB) bus. Direct connection to LG outdoor unit
Date Rev. Details Author
Jtech engineering ltd J - Te c h E n g i n e e ring, L t d. 11080 Bond Boulevard Delta BC V4E 1M7 Canada Tel: 604 543 6272 Fax: 604 543 6476 http://www.jtecheng.com AUTODIALER USER S MANUAL REVISION HISTORY
Power network telecommunication
www.siemens.com Power network telecommunication Teleprotection Answers for infrastructure and cities. Binary I/O The best protection against high-voltage grid failures When it comes to managing power networks,
SECTION 13850 DETECTION AND ALARM
SECTION 13850 DETECTION AND ALARM PART 1 GENERAL 1.01 SUMMARY A. Section Includes 1. Control Panel 2 Associated Equipment B. Products Installed But Not Supplied Under This Section 1. Section 16140 - Wiring
Capacitor Protection Relay SPAJ 160 C. Product Guide
Issued: April 1999 Status: Updated Version: C/19.04.2006 Data subject to change without notice Features One-, two- and three-phase overload stage with definite time characteristic One-, two- and three-phase
M-Bus-Logger Data Logger
Data Logger User Manual Doc.-No.: E102312514074 Bär Industrie-Elektronik GmbH Rathsbergstr. 23 D-90411 Nürnberg Phone: +49 (0)911 970590 Fax: +49 (0)911 9705950 Internet: www.baer-gmbh.com COPYRIGHT Copyright
Implementation of a New Substation Restoration System Using Protective Relays and a Logic Processor
Implementation of a New Substation Restoration System Using Protective s and a Logic Processor BERNARD S. TATERA, JR. Pacific Gas & Electric Company San Francisco, California Bst1@pge.com LAWRENCE C. GROSS,
This recommendation was prepared by the Technical Commission of EUROMAP.
EUROMAP 67 Electrical Interface between Injection Moulding Machine and Handling Device / Robot Version 1.9, August 2013 Draft 1.10 April 2014 (10 pages) This recommendation was prepared by the Technical
Comparison of protocols used in remote monitoring: DNP 3.0, IEC 870-5-101 & Modbus
M.Tech. Credit Seminar Report, Electronics Systems Group, EE Dept, IIT Bombay, submitted November 03 Comparison of protocols used in remote monitoring: DNP 3.0, IEC 870-5-101 & Modbus Jay Makhija (03307905)
ISL Insulation monitoring devices Continuous monitoring of IT systems from photovoltaic to industrial applications.
ISL Insulation monitoring devices Continuous monitoring of IT systems from photovoltaic to industrial applications. Ensuring operational continuity To ensure the operational continuity of an electrical
Technical Specification Of Substation Protection & Control System with IEC 61850 BHEL s Perspective
Technical Specification Of Substation Protection & Control System with IEC 61850 BHEL s Perspective India Core Events 2008 September 24 th 2008 1 Background Stability & Reliability Data Storage Communication
Network Analyzer for Low-, Medium- and High-Voltage Networks
Technical data Network nalyzer for Low-, Medium- and High-Voltage Networks Model PQ-Box 100 1 Fault detection 1 Evaluation of voltage quality according to EN50160 and IEC61000-2-2 (2-4) 1 Fault recorder
Auxiliary equipment for communication with the EuroProt protective devices
Auxiliary equipment for communication with the EuroProt protective devices RS232 cable This cable is used to connect the RS232 connector located on the front panel of the EuroProt devices to the 9 pin
RS - SPM. Serial parallel translator module
ReSatron GmbH Boisheimer Str. 162 D-41751 Viersen Telefon (+49) 02162-45 06 80 Telefax (+49) 02162-45 03 04 email: info@resatron.de RS - SPM Serial parallel translator module RSSPM000215SPM-021 - Subject
Remote Monitoring and REC 501 Control Unit Product Guide
Remote Monitoring and Control Unit REC 501 Product Guide Issued: May 1999 Status: Updated Version: B/06.11.2001 Data subject to change without notice Features Remote control and monitoring unit for the
R&S ENY81-CA6 Coupling Network For radio disturbance and immunity measurements
R&S ENY81-CA6 Coupling Network For radio disturbance and immunity measurements on telecommunications ports Test & Measurement Data Sheet 01.00 R&S ENY81-CA6 Coupling Network At a glance The R&S ENY81-CA6
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
IntesisBox KNX Modbus RTU master
IntesisBox KNX RTU master Gateway for integration of RTU devices into KNX control systems. Integrate RTU devices (Chillers, Roof Tops, electricity meters, heating floors, heat pumps, PLCs ) into KNX control
How To Use A Network Card With A Network Box (Ios) On A Microsoft Powerbook 2.5 (I2) (I3) (Io2) And I2 (Io) (Net) (Ipo) (
FACTORY AUTOMATION MANUAL BM100 BACKUP MODULE With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for Products and Services of
EGCP-3 MC 8406-114 Revision H Software 5448-145 Revision F. Explanation of Software Changes Made for the EGCP-3 MC Control. Application Note 51298
EGCP-3 MC 8406-114 Revision H Software 5448-145 Revision F Explanation of Software Changes Made for the EGCP-3 MC Control Application Note 51298 WARNING DANGER OF DEATH OR PERSONAL INJURY WARNING FOLLOW
A DNP3 Protocol Primer
A Protocol Primer Introduction This is a primer for people who want a quick understanding of without having to comb through the tedious details of a complex specification. The writing style is meant to
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications PRODUCT INFORMATION The benchmark for flexibility. Laser scanners of the BCL 20 series as variable as your requirements demand.
Disturbance Recoder SPCR 8C27. Product Guide
Issued: April 1999 Status: Updated Version: C/26.04.2006 Data subject to change without notice Features Versatile digital disturbance recorder module for recording various phenomena in the electric power
LINETRAXX VMD460-NA. Network and system protection (NS protection) for monitoring the power feed-in of power generation systems
LIETRAXX -A etwork and system protection (S protection) for monitoring the power feed-in of power generation systems TDB301021en/06.2013 LIETRAXX -A etwork and system protection (S protection) for monitoring
RPDO 1 TPDO 1 TPDO 5 TPDO 6 TPDO 7 TPDO 8
EN ZC - 6DI8DO CANopen I/O Module 6 Digital Input 8 Digital Output Or 8 Counters (3 bit) 8 Digital input 8 Digital output User Manual Contents: Features PDOs PDO Type Emergency Message Functional Diagrams
Modbus Server SAMSUNG Air Conditioners
IntesisBox Server SAMSUNG Air Conditioners Gateway for monitoring and control of Samsung Air Conditioning Systems from any master device TCP or RTU (BMS, PLC, SCADA, HMI, TouchPanel ) Master TCP Master
Inwall 4 Input / 4 Output Module
Inwall 4 Input / 4 Output Module IO44C02KNX Product Handbook Product: Inwall 4 Input / 4 Output Module Order Code: IO44C02KNX 1/27 INDEX 1. General Introduction... 3 2. Technical data... 3 2.1 Wiring Diagram...
CALL MANAGER INSTALLATION
CALL MANAGER INSTALLATION and OPERATION INSTRUCTIONS JULY 17, 2006 Page 1 TABLE OF CONTENTS INTRODUCTION Use of this manual ----------------------------------------------------------------- 2 Product Overview
IntesisBox Modbus Server Fidelio IP
IntesisBox Server Fidelio IP Gateway for integration of Micros Fidelio Ho management system into (RTU and TCP) enabled control systems. Integrate your Micros Fidelio Ho management system into your master
IntesisBox. KNX SAMSUNG Air Conditioning. Gateway for integration of Samsung air conditioners into KNX control systems. RS485.
IntesisBox KNX SAMSUNG Air Conditioning Gateway for integration of Samsung air conditioners into KNX control systems. Integrate Samsung Air Conditioners into KNX. KNX EIB Bus IntesisBox RS485 MIM-B13x/B04A
XP Series Balances Operation Manual
XP Series Balances Operation Manual North and South America: 6542 Fig Street Arvada, Colorado 84 1-8-321-1135 Tel: 33-431-7255 Fax: 33-423-4831 U.K. and Ireland: Denver House, Sovereign Way Trafalgar Business
PREMIUM CLEAN ROOM MONITOR MODELS 8630-CRM-S 8630-CRM-P
PREMIUM CLEAN ROOM MONITOR MODELS 8630-CRM-S 8630-CRM-P MANUAL SUPPLEMENT Contents of this manual supplement include: Sequence of Operation Menu Structure Description of New Software Items Deleted Software
Telephone- and leased line modem for industrial applications TD-36
Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased
Virtual Integrated Design Getting started with RS232 Hex Com Tool v6.0
Virtual Integrated Design Getting started with RS232 Hex Com Tool v6.0 Copyright, 1999-2007 Virtual Integrated Design, All rights reserved. 1 Contents: 1. The Main Window. 2. The Port Setup Window. 3.
Inwall Room Temperature Unit
Inwall Room Temperature Unit TM11B01KNX TM11B11KNX TM11B21KNX Product Handbook Product: Inwall Room Temperature Unit Order Code: TM11B01KNX TM11B11KNX TM11B21KNX Application Program ETS: TM11B_1KNX Inwall
Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
ELR: ABB range of front panel residual current relays Protection device according to IEC/EN 60947-2 Annex M
ELR: ABB range of front panel residual current relays Protection device according to IEC/EN 60947-2 Annex M Tested, certified, reliable Network monitoring and protection The electronic residual current
WaveReady CFM. Optical Link Monitoring System: Continuous Fiber Monitor
WaveReady CFM Optical Link Monitoring System: Continuous Fiber Monitor www.lumentum.com Data Sheet The Lumentum Continuous Fiber Monitor (CFM) offers a compact, modular solution for performance monitoring
Catalog. Arc Guard System TM TVOC-2
Catalog Arc Guard System TM TVOC-2 Introduction An even better Arc Guard System TVOC-2, ABB s latest Arc Monitor, builds on the well known TVOC design. Its new functions and features improve an already
Building a Simulink model for real-time analysis V1.15.00. Copyright g.tec medical engineering GmbH
g.tec medical engineering GmbH Sierningstrasse 14, A-4521 Schiedlberg Austria - Europe Tel.: (43)-7251-22240-0 Fax: (43)-7251-22240-39 office@gtec.at, http://www.gtec.at Building a Simulink model for real-time
HUNTER-PRO 32 Ver. 3.8 Intruder Alarm System RXN-9/416 User Guide
HUNTER-PRO 32 Ver. 3.8 Intruder Alarm System RXN-9/416 User Guide PIMA Electronic Systems Ltd. 5 Hatzoref Street, Holon 58856, Israel +972-3-5587722 +972-3-5500442 support@pima-alarms.com http://www.pima-alarms.com
Power network telecommunication
www.siemens.com Power network telecommunication PowerLink power line carrier system Answers for infrastructure and cities. Power line carrier always up-to-date A few years ago, it was looking as if digital
2 1. 5 O pen F ram e Tou c h M on i t or
M TM G T- R TL 2 2 W- A 21.5" RE AR TOU C H MONITOR Trade SpA - Official European Distributor R eo O ar M ount R T L 1 7 3 2 1. 5 O pen F ram e Tou c h M on i t or R TL 2 2 W- A on i t or D at as h eet
COUPLING / DECOUPLING NETWORK (CDN) FOR UNSCREENED BALANCED PAIRS
IEC / EN 61000-4-6 specifies the design and performance of a range of coupling / decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq
Three-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
Evaluation Board. i-modul and Socket. Manual
Evaluation Board i-modul and Socket Manual Copyright March 14 INSYS MICROELECTRONICS GmbH Any duplication of this manual is prohibited. All rights on this documentation and the devices are with INSYS
1-Port R422/485 Serial PCIe Card
1-Port R422/485 Serial PCIe Card Installation Guide 1. Introduction Thank you for purchasing this 1-Port RS422/485 Serial PCI Express (PCIe) Card. It is a universal add in card that connects to a PC or
Barcode Reader Series BCL 31, BCL 32, BCL 34
P R O D U C T I N F O R M A T I O N Barcode Reader Series BCL 31, BCL 32, BCL 34 BCL 31, BCL 32 and BCL 34: Barcode readers for universal use in conveyor and storage technology. 3 models: numerous advantages.
Comparative Market Analysis of Project Management Systems
University of Osnabrück Chair of Business Administration/Organization and Information Systems Prof. Dr. Hoppe (Ed.) Comparative Market Analysis of Project Management Systems Frederik Ahlemann Katharinenstr.
MicroTech II McQuay Maverick II Rooftop Unit Controller BACnet Communication Module (MS/TP)
Installation and Maintenance Manual IM 852 Group: Controls Part Number: IM 852 Date: June 2007 Supercedes: New MicroTech II McQuay Maverick II Rooftop Unit Controller BACnet Communication Module (MS/TP)
User Manual Revision 2.201 English
Document code: MN67117_ENG Revision 2.201 Page 1 of 14 User Manual Revision 2.201 English CANopen Repeater Small (Order Code: HD67117 HD67117M HD67117-M12 HD67117R) HD67117 HD67117M HD67117-M12 HD67117R
Communication Unit 560CMU05 Data sheet
RTU560 product line Communication Unit 560CMU05 Data sheet E1 10/100 MB LAN E2 10/100 MB LAN CP1, CP2 RS232C or RS485 Ethernet Controller Ethernet Controller USART Processor bus MPU ELAN520 /Flash Memory
Addendum to the Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services Addendum to the Operating Instructions MOVIMOT with AS-Interface and AC Motor DT/DV Unit Replacement MOVIMOT MM..C -> MM..D with MLK3A
BT300 HVAC Drives Conventional Bypass (C-Bypass) Options
BT300 HVAC Drives Conventional Bypass (C-Bypass) Options Description The BT300 Conventional Bypass is a companion package for the family of BT300 HVAC Drives. For information on the family of BT300 HVAC
OPERATIONS CAPITAL. The Operations Capital program for the test years is divided into two categories:
Filed: September 0, 00 EB-00-0 Tab Schedule Page of OPERATIONS CAPITAL.0 INTRODUCTION Operations Capital funds enhancements and replacements to the facilities required to operate the Hydro One Transmission
Copyright 1980 by the Association for Supervision and Curriculum Development. All rights reserved.
PCAN-B10011S Bus Converter High-speed CAN to Truck Trailer CAN. User Manual. Document version 2.1.0 (2013-11-15)
PCAN-B10011S Bus Converter High-speed CAN to Truck Trailer CAN User Manual Document version 2.1.0 (2013-11-15) Products taken into account Product Name Model Part number PCAN-B10011S IPEH-002041 CANopen
CMC-PD01 PROFIBUS DP Slave Communication Card Operation Manual
CMC-PD01 PROFIBUS DP Slave Communication Card Operation Manual CMC-0205820-01 Table of Content 1 Introduction to CMC-PD01... 2 1.1 Product Introduction... 2 1.2 Features... 2 2 Product Profile and Outline...
LDCDP 11999.GdW. L force Controls. Ä.GdWä. Software Manual. Industrial PC. WindowsR CE Thin Client. Operating system
L force Controls Ä.GdWä LDCDP 11999.GdW Software Manual Industrial PC WindowsR CE Thin Client Operating system l Please read these instructions before you start working! Follow the enclosed safety instructions.
Teleprotection Schemes and Equipment. James W. Ebrecht Young Power Equipment Scottsdale, AZ
* Teleprotection Schemes and Equipment James W. Ebrecht Young Power Equipment Scottsdale, AZ Teleprotection Schemes And Equipment ~ ~ Relay Relay Teleprotection Communications channel Teleprotection Protection
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
ICP-CP500. User's Guide ICP-CP500 Codepads
ICP-CP500 EN User's Guide ICP-CP500 Codepads ICP-CP500 User's Guide 1.0 ICP-CP500 Series Codepads Overview EN 2 1.0 ICP-CP500 Series Codepads Overview The codepad is the communications interface between
TURBOtech srl. SED-635 Digital Excitation System. Industrial Electronics Sector FEATURES
SED-635 Digital Excitation System SED-635 is a complete excitation system capable of adapting to control synchronous generators of any size. The integration of the TOUCH SCREEN operator interface and a
Pressure Switch for gas and air
Switch for gas and air GAO-A4 GMH-A4 GML-A4 UL Listed UL 353 File # MH 16628 CSA Certified CSA C22.2 No. LR 53222 Certification file # 201527 FM Approved Class 3510, 3530 File # J.I. 1Y919.AF Commonwealth
OPT-700 - SERIAL TO FIBER OPTIC CONVERTER
USER S MANUAL OPT-700 - SERIAL TO FIBER OPTIC CONVERTER JUL / 05 OPT-700 VERSION 1 TM FOUNDATION OPT700ME smar www.smar.com Specifications and information are subject to change without notice. Up-to-date
ABB i-bus KNX Switch Actuators SA/S Product Information
ABB i-bus KNX Switch Actuators SA/S Product Information ABB Stotz-Kontakt GmbH Your Partner with Know-How for Future-Oriented Electrical Installation Hugo Stotz, the company founder of ABB Stotz-Kontakt,
Computer Gateway Specification and Technical Data
L Computer Gateway Specification and Technical Data CG03-500 R500 3/96 detergant coffee chocolate Page 2 TDC 3000X Computer Gateway Specification and Technical Data Introduction This publication defines
ELCOMPONENT LTD. User Manual
ELCOMPONENT LTD R-DCU - Remote Data a Collection Unit User Manual al CONTENTS Page 1. GENERAL... 1 2. SPECIFICATION... 4 3. INSTALLATION AND INSTRUCTIONS... 6 4. INSTRUMENT SET-UP AND RESET... 11 All rights
TEMON 8-C. Doc. N MO-0370-ING TEMPERATURE MONITOR DEVICE TYPE TEMON 8-C OPERATION MANUAL. Microener - Copyright 2010 FW 2.2 Date 01.12.2008 Rev.
TEMPERATURE MONITOR DEVICE TYPE TEMON 8-C OPERATION MANUAL Microener - Copyright 2010 FW 2.2 Date 01.12.2008 Rev. 0 1. Generality 3 2. Introduction 3 3. Accessories and Options 3 4. Installation 3 5. Connection
Information Board User s Guide
We are here just for you! Sure Electronics Dot Matrix Display Information Board User s Guide Product Name Product ID : Dot Matrix Display Information Board : DE-DP0 Product Version : Ver. Document Version