Specifications may be subject to change for improvement without prior notice

Transcription

1 Gas Detector $,7B4.:'( ) Part no System: Gas Alarm System Description KVD is a group name for detectors in the Salwico gas alarm programme for detection of explosive, toxic or inflammable fluids and gases. KVD detectors are intended for use in heavy-duty industrial environments and can be adapted for detection of different gases depending on which semiconductor sensor it is equipped with. The KVD detector consists of an aluminium junction box and a sintered housing around the sensor. The KVD is connected to the central unit via a screened 3-core cable. KVD(COD) is intended for detection of carbon monoxide (CO). The KVD(COD) also includes a dust filter to minimise interference from other gases. Technical data Cable connection to See connection diagram gas alarm central for gas detector Enclosure protection IP-54 Cable entry 6-11 mm Temperature range C Relative humidity 0-95% Material connection box Varnished aluminium Weight 350 g Colour Grey box with nickelplated sintered housing Dimensions (mm) Connection Specifications may be subject to change for improvement without prior notice H:9>474@8 Consilium Marine AB P.O. Box 8763, SE Göteborg Phone Fax Data sheet no: E

2 Gas Detector BUTOX ST400EC Part no O H 2 S 4463 CO System: Salwico GS3000, SW2020 Description The BUTOX ST400EC gas detector to measure oxygen, toxic or flammable gases consists of a chrome plated ABS-housing with transmitter print, sensor and sensor holder in stainless steel. The transmitter print is based on the one man calibration technology. This means that one person can make all the necessary calibrations inside the detector head, without the necessity of a second calibration procedure on the measurement module. Measuring Range CO ppm H 2 S 0-30 ppm O % Data Weight ~470 g Material housing Chrome plated ABS Sensor housing SS 316 Power supply VDC Signal 4-20mA (2-wire) Sensor 2- or 3-electrode Measuring principle Electrochemical cells Temperature range -40 C to +60 C Protection class IP65 (excl. sensor) Cable entry Od Ø mm Optional certificate class* EEx ia IIC T6, T amb -40 C to +60 C *If used with a specified safety barrier. Sensors for other toxic gases are available upon request. Dimensions (mm) Connection Mounting holes Specifications may be subject to change for improvement without prior notice ÇConsilium Consilium Marine AB P.O. Box 8763, SE Göteborg Phone Fax Data sheet no: E

3 Gas Detector BUCOM ST600EX Part no System: Salwico GS3000, SW2020 Description The BUCOM ST600EX gas detector for combustible gases is assembled with an EExd sensor, housing and cable gland. The transmitter is based on the so-called one man calibration principle, which means that the calibration takes place at the detector head only. The sensor is a replaceable catalytic oxidation sensor and consists of detection and reference elements that are provided in a wheatstone bridge. When exposed to gas, the bridge will be unbalanced and an electric signal proportional to the gas-concentration will be converted to a 4-20mA output signal. Sensors for other explosive gases are available upon request. When installing BUCOM ST600EX in ventilation ducts, the air duct mounting kit part. no shall be used, see separate drawing. Data Weight 2.8 kg Material housing Steel coated Sensor housing SS 316 Power supply VDC Power consumption 1.7 W Output signal 4-20mA (3-wire) Response time t90 < 15sec. Sensor lifetime Min. 3 years in air Measuring principle Catalytic Measuring range 0-100% LEL Temperature range -20 C to +60 C Protection class IP65 (excl. sensor) Cable entry Od Ø mm Ex class EEx-d IIC T6 Certificate KEMA No. Ex.99.E.1378 Cable spec. Shielded, min. 3x0.75mm 2 Cable resistance Max 100Ω at 24VDC Max 200Ω at 30VDC Dimensions (mm) Connection 194 Mounting holes Ø7 76 Specifications may be subject to change for improvement without prior notice ÇConsilium Consilium Marine AB P.O. Box 8763, SE Göteborg Phone Fax Data sheet no: E

4 Gasdetektor Salwico KVD-Ex KVD-Ex är en detektor ingående i Salwico gaslarmsprogram för detektering av explosiva, giftiga och brännbara vätskor och gaser. KVD-Ex är avsedd för tuff inomeller utomhusmiljö och den är godkänd för installation i Ex-klassade områden, zon 1 eller motsvarande. KVD-Ex anpassas för detektering av olika gaser genom att den kan bestyckas med olika halvledarsensorer. KVD-Ex består av en kopplingsdosa av polyester och ett sensorhus av rostfritt stål. KVD-Ex är typgodkänd av Nemko. u doc 1(2) çconsilium

5 Dimensioner (mm) Anslutningar Data Kabelförbindning med gaslarmscentral Kapslingsgrad Se separat inkopplingsschema Material sensorhus Rostfritt stål (SIS2343) IP-65 Mätprincip Halvledare (Figaro TGS) kopplingsdosa Kabelgenomföring mm Ex-skyddsklass EEx de IIC T6 Temperaturområde Vikt 900 g Relativ fuktighet 0 95% Färg kopplingsdosa Svart Material kopplingsdosa Polyester Färg sensorhus Blank metall Artikelnummer 3122 *) Hela detektorn håller IP-65 om den förses med speciellt stänkskydd för sensorhus. Se separat ritning. u doc 2(2) çconsilium CONSILIUM SECURITY SYSTEMS AB P.O. Box 8763 SE GÖTEBORG SWEDEN Besöksadress: Salsmästaregatan 21 Ringön GÖTEBORG Telefon: Nat Int Telex: consmar s Telefax: Nat Int

6 Gas Detector Salwico KVD-Ex KVD-Ex is a detector type included in the Salwico gas alarm program for detection of explosive, toxic and inflammable fluids and gases. KVD-Ex is intended for heavy environments, both indoors and outdoors and is approved for installation in Ex classified areas. KVD-Ex can be adapted to detect different gases when equipped with semiconductor sensors. KVD-Ex consists of a junction box of polyester type and a sensor housing of stainless steel type. KVD-Ex is type approved. u doc 1(2) çconsilium

7 Dimensions (mm) Connection Data Cable connection to central panel Enclosure protection See separate connection diagram no. Sxxx319 Material sensor housing Stainless steel (SIS2343) IP-65 Measuring principle Semi-conductor (Figaro TGS) junction box *) Cable connection mm Ex protection class EEx de IIC T6 Temperature range Weight 900 g Relative humidity 0 95% Colour junction box Black Material junction box Polyester Colour sensor housing Metal Part no 3122 *) The entire detector will meet IP-65 if fitted with a special protector for sensor housing. See separate data sheet. u doc 2(2) çconsilium CONSILIUM MARINE AB P.O. Box 8763 SE GÖTEBORG SWEDEN Visiting address: Salsmästaregatan 21 Ringön GÖTEBORG Telephone: Nat Int Telex: consmar s Telefax: Nat Int

8

9

10

11

12 Local Gas Indicator Salwico LGI Part no C x H y O CO CO H 2 S System: Salwico GS3000 Gas Alarm system Description The Salwico LGI local gas indicator is an LCD display intended for local display of a gas detector connected to the GS3000 Gas Alarm System. The Salwico LGI continuously displays the gas reading. The Salwico LGI shall be connected on the signal line between the gas transmitter and the SM13 or SM13/11. The lid of the Salwico LGI can also be mounted directly on a SM13/11, since the lids have the same dimensions. Data Input current Ambient temperature Protection class Function Material Cable Weight Colour 4 20 ma 25 to +55 C IP66 Analogue Polystyrol OD Ø10 16 mm ~0.4 kg Grey Dimensions (mm) Connection Salwico LGI Local Gas Indicator ÇConsilium Specifications may be subject to change for improvement without prior notice ÇConsilium Consilium Marine AB P.O. Box 8763, SE Göteborg Phone Fax Data sheet no: E

13 Sensor module $,7B4.:$ Part no System: GS3000 Gas Alarm System Description The SM13 is an explosion proof addressable unit with an interface for gas detectors. It is intended for use with Salwico Gas Alarm System GS3000 and can interface to gas detectors with a 0-20 ma transmitter interface. The SM13 detects when the gas concentration exceeds the user-defined low and high gas alarm levels. The unit continuously monitors the gas detector for faults and also checks the supply voltage of the detector interface. The combination of the double-sided communication loop and two built-in short circuit isolators makes the SM13 invulnerable to any short circuit or cable break. The sensor module is designed according to the requirements of IMO and the European Community. Dimensions (mm) Technical data Detector voltage 24 ± 6 VDC 0 20 ma Interface max 30 ma Ambient temperature 25 to +55 C Explosion class Eex em II T5 Function Analogue Material Polyester Cable OD mm Weight 0.9 kg Colour Black Connection Cable 1 Cable 2 1: Loop in + 3: Loop out + 2: Loop in 4: Loop out - 10: 24 V + 11: 24 V + 14: 24 V 15: 24 V - Cable 3 Cable 4 13: Ext. Alarm + 12: 24 V + 14: Ext. Alarm - 16: 24 V - 18: 0-20 ma + 19: 0-20 ma Cable 1 Cable 2 Cable 3 If applicable Cable 4 Setting the address Cut the connectors at 6, 7, 8 or 9 to get the required address. E.g. cut connectors 6 and 8 (Bit 0 and Bit 2) to get address 10. The address is preset to 15 on delivery. Addr Cut Addr Cut Addr Cut 1 7,8,9 6 6, ,8, ,7 3 8,9 8 6,7, ,7,9 9 7, ,9 10 6,8 15 No cut Specifications may be subject to change for improvement without prior notice H:9>474@8 Consilium Marine AB P.O. Box 8763, SE Göteborg Phone Fax Data sheet no: E

14 Sensor module $,7B4.:$ Part no System: GS3000 Gas Alarm System Description The SM13/11 is an addressable unit with an interface for gas detectors. It is intended for use with Salwico Gas Alarm System GS3000 and can interface to gas detectors with a 0-20 ma transmitter interface. The SM13/11 detects when the gas concentration exceeds the user-defined low and high gas alarm levels. The unit continuously monitors the gas detector for faults and also checks the supply voltage of the detector interface. The combination of the double-sided communication loop and two built-in short circuit isolators makes the unit invulnerable to any short circuit or cable break. The sensor module is designed according to the requirements of IMO and the European Community. Dimensions (mm) Mounting holes 4x Ø5mm 75 Technical data Detector voltage 24 ± 6 VDC 0 20 ma Interface max 30 ma Ambient temperature 25 to +55 C Protection class IP66 Function Analogue Material Polystyrol Cable OD mm Weight 0.4 kg Colour Grey Connection Cable 1 Cable 2 1: Loop in + 3: Loop out + 2: Loop in 4: Loop out 10: 24 V + 11: 24 V + 14: 24 V 15: 24 V Cable 3 Cable 4 13: Ext. Alarm + 12: 24 V + 14: Ext. Alarm 16: 24 V 18: 0-20 ma + 19: 0-20 ma Cable 1 Cable 2 Cable 3 If applicable Cable 4 Setting the address Cut the connectors at 6, 7, 8 or 9 to get the required address. E.g. cut connectors 6 and 8 (Bit 0 and Bit 2) to get address 10. The address is preset to 15 on delivery. Addr Cut Addr Cut Addr Cut 1 7,8,9 6 6, ,8, ,7 3 8,9 8 6,7, ,7,9 9 7, ,9 10 6,8 15 No cut Specifications may be subject to change for improvement without prior notice H:9>474@8 Consilium Marine AB P.O. Box 8763, SE Göteborg Phone Fax Data sheet no: E

15

16

17 Gas Detector BUCOM ST200 Part no System: Salwico GS3000, SW2020 Description The BUCOM ST200 gas detector for combustible gases is assembled in a chrome-plated ABS housing. The transmitter is based on the so-called one man calibration principle, which means that the calibration takes place at the detector head only. The sensor is a replaceable catalytic oxidation sensor and consists of detection and reference elements that are provided in a wheatstone bridge. When exposed to gas, the bridge will be unbalanced and an electric signal proportional to the gas-concentration will be converted to a 4-20mA output signal. Sensors for other explosive gases are available upon request. Dimensions (mm) Data Weight ~500 g Material housing Chrome plated ABS Sensor housing SS 316 Power supply VDC Power consumption 1.7 W Measuring range 0-100% LEL Response time t90 < 15sec. Relative humidity 0-99% (non condensing) Signal 4-20mA (3-wire) Measuring principle Catalytic Sensor lifetime Min. 3 years in air Temperature range -20 C to +60 C Protection class IP65 (excl. sensor) Cable entry Od Ø mm Cable spec. Shielded, min. 3x0.75mm 2 Cable resistance Max 100Ω at 24VDC Max 200Ω at 30VDC Connection Mounting holes Ø Specifications may be subject to change for improvement without prior notice ÇConsilium Consilium Marine AB P.O. Box 8763, SE Göteborg Phone Fax Data sheet no: E

18 Gas Detector BUCOM ST200 Part no System: Salwico GS3000, SW2020 Description The BUCOM ST200 gas detector for combustible gases is assembled in a chrome-plated ABS housing. The transmitter is based on the so-called one man calibration principle, which means that the calibration takes place at the detector head only. The sensor is a replaceable catalytic oxidation sensor and consists of detection and reference elements that are provided in a wheatstone bridge. When exposed to gas, the bridge will be unbalanced and an electric signal proportional to the gas-concentration will be converted to a 4-20mA output signal. Sensors for other explosive gases are available upon request. Dimensions (mm) Data Weight ~500 g Material housing Chrome plated ABS Sensor housing SS 316 Power supply VDC Power consumption 1.7 W Measuring range 0-100% LEL Response time t90 < 15sec. Relative humidity 0-99% (non condensing) Signal 4-20mA (3-wire) Measuring principle Catalytic Sensor lifetime Min. 3 years in air Temperature range -20 C to +60 C Protection class IP65 (excl. sensor) Cable entry Od Ø mm Cable spec. Shielded, min. 3x0.75mm 2 Cable resistance Max 100Ω at 24VDC Max 200Ω at 30VDC Connection Mounting holes Specifications may be subject to change for improvement without prior notice ÇConsilium Consilium Marine AB P.O. Box 8763, SE Göteborg Phone Fax Data sheet no: E

19 Flame arrester Salwico FTH-1/4 Part no System: Salwico gas alarm systems Description The Flame arrester Salwico FTH-1/4 is designed to meet the requirements for explosion proof penetration of bulkheads and walls between safe and dangerous areas, with sample and exhaust pipes for gas sampling and detection systems. Data Material: Body and filter: Stainless Steel 316L O-ring: Viton Explosion group: IIA, IIB and IIC Weight: 85 g Part no.: 4227 Dimensions (mm) Specifications may be subject to change for improvement without prior notice ÇConsilium Consilium Marine AB P.O. Box 8763, SE Göteborg Phone Fax Data sheet no: E