DRESSER TYPE PIPE COUPLINGS
|
|
|
- Tracy Greene
- 7 years ago
- Views:
Transcription
1 DRESSER TYPE PIPE COUPLINGS Manufactured by Smith Blair Smith Blair Couplings Dresser "Type" Couplings are used for heavy duty high pressure applications. A wide variety of gasket materials are available. The complete Smith Blair coupling product line is available from IAC. IAC also supplies Repair Clamps, Saddles, Expansion Joints, Reducing Clamps and more. IAC can cross-reference most coupling brands. We must have the following information to quote couplings: Outside diameter and type of pipe Temperature and type of material going through the pipe for correct middle ring and gasket. Maximum amount of pressure in the pipe. PB Lamar Avenue / Mission, KS 0 / USA
2 DRESSER TYPE PIPE COUPLINGS High Pressure Pipe Couplings for Steel, Cast Iron and Ductile Iron Pipe 11 Couplings Our Steel couplings offer many distinct advantages when installed in a piping system. Properly selected and installed flexible couplings maintain the continuity of the pipe system, retain the line contents under internal pressure and prevent infiltration under vacuum. Our couplings consist of one cylinderical sleeve with conical inner surfaces at each end; two resilient, wedge-shaped, speciallycompounded rubber gaskets; two ring-shaped followers and a set of high-strength, low-alloy track-head, oval-neck, rolled-thread bolts with heavy hex nuts. Style 11 Steel Couplings Material Specifications Style 11 Couplings are available in sizes from 1/" to " Rated PSI Working Pressure. Manufactured with Fusion Bonded Flexi-Coat Epoxy Powder Coating. " - 1" (0mm-00mm) Standard weight design with cast follower, steel sleeve and low-alloy bolts and nuts. Material Specifications Sleeve: ASTM A, ASTM A1 or carbon steel having minimum yield of 0,000 psi. Followers Ductile iron ASTM A or carbon steel having minimum yield of 0,000 psi. Bolts & Nuts High-strength, low-alloy steel with heavy semi-finished hexagon nuts. Optional: Stainless steel and electro-galvanized. Finish: Fusion bonded Flexi-Coat Epoxy per AWWA C1. Material Specifications are subject to change. Gasket Material Specifications Standard: Nitrile (Buna-N) NSF 1 Compounded to produce superior storage and performance characteristics while resisting water, acids, alkalis, most (aliphatic) hydrocarbons and many other chemicals. Temperature range -0 F to F. Consult Manufacturer for specific apllications or other service termperatures. Optional: Nitrile (Buna N) Protected. A continuous brass spring molded into the leading edge of the gasket to insure metal contact between the pipe and the coupling sleeve, Extra preotection is given against line content and the coupling is electrically bonded to the pipe. Material Specifications are subject to change. We must have the following information to quote couplings: Outside diameter and type of pipe Temperature and type of material going through the pipe for correct middle ring and gasket. Maximum amount of pressure in the pipe. PB01 00 Lamar Avenue / Mission, KS 0 / USA
3 11 Steel Couplings - STEEL PIPE ONLY For Steel and Pipe with Flexi-Coat Epoxy Coating See page for Cast and Ductile Iron Pipe Specifications. Couplings Available with Alloy, 0 Stainless Steel or 1 Stainless Steel Bolts and Nuts. Certified to NSF / ANSI 1-G Nominal Size O.D Sleeve Thickness & Length No. Bolts Diameter Length (In.) Catalog Number Wt. Each (lbs) 1/*.. x 1/. x 1 1/ x 1/ x /* 1.0. x 1/. x 1 1/ x 1/ x * 1.. x. x 1 1/ x 1/ x /* 1.. x. x 1 1/ x 1/ x /* x. x 1 1/ x 1/ x *.00. x. x 1 1/ x 1/ x *.. x. x. x. x 1. x. x. x 1 1/ x / x / x 1/ / x 1 / x / x 1/ / x /..0 x.0 x 1 / x / x x / x x. x. x. x 1 / x / x / x 1/ / x x.1 x 1 / x / x x.1 x.1 x 1.1 x 1.1 x / x / x / x 1 1/ / x 1 / x / x 1/ x 1 / x / x / x 1/ x 1/ x 1/ x 1 1/ x / x / x 1/ / x 1 1/ / x 19 1/ / x 1/ / x 1/ x 1/ x 1/ x 1 1/ x / x / x / x 1/ / x 1 / x Couplings furnished with steel "Z" section, High Strength Followers Buna N Protected Gaskets priced on application. Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the coupling. * Note: 1/" - " have electro-galvanized bolts and nuts. PB01 00 Lamar Avenue / Mission, KS 0 / USA
4 11 Steel Couplings - STEEL PIPE ONLY For Steel and Pipe with Flexi-Coat Epoxy Coating See page for Cast and Ductile Iron Pipe Specifications. Couplings Available with Alloy, 0 Stainless Steel or 1 Stainless Steel Bolts and Nuts. Flexi-Coat Epoxy Coating, Certified to NSF / ANSI 1-G Nominal Size O.D Sleeve Thickness & Length No. Bolts Diameter Length (In.) Catalog Number Wt. Each (lbs). 1/ x 1/ x 1/ x 1/ x 1 1/ x / x / x / x 1/ / x 1 / x / x 1/ x 1/ x 1/ x 1 1/ x / x / x 1/ / x 1 1/ / x 19 1/ / x 1/ / x 1/ x / x 1/ x 1/ x 1 1/ x / x / x / x / x 1/ / x 1 / x / x 1/ x 1/ x 1/ x 1 1/ x / x / x 1/ / x 1 1/ / x 19 1/ / x 1/ / x 1/ x / x 1/ x 1/ x 1 1/ x / x / x / x / x / x 1/ / x 1 / x / x Couplings furnished with steel "Z" section, High Strength Followers Buna N Protected Gaskets priced on application. Suitable anchorage must be provided when excessive pipe movement could cause the pipe to move out of the coupling. * Note: 1/" - " have electro-galvanized bolts and nuts. PB01 00 Lamar Avenue / Mission, KS 0 / USA
5 11 Steel Couplings - CAST and DUCTILE For Cast and Ductile Iron Pipe Sizes See page for Steel Pipe Specifications. Couplings Available with Alloy, 0 Stainless Steel or 1 Stainless Steel Bolts and Nuts. Flexi-Coat Epoxy Coating, Certified to NSF /ANSI1-G Nominal Size O.D Sleeve Thickness & Length No. Bolts Diameter Length (In.) Catalog Number Wt. Each (lbs).0.0 x.0 x / x 1/ / x 1 1/ /..0 x.0 x / x 1/ / x 1 1/ x. x / x 1/ / x 1 1/ x.1 x / x 1/ / x 1 1/ x.1 x 1/ x 1/ x / x 1/ / x 1 1/ / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x 1/ x / x 1/ / x 1 1/ / x / x / x 1/ / x 1 1/ / x / x / x 1/ / x 1 1/ / x / x / x 1/ / x 1 1/ / x / x / x 1 / x / x 1/ / x 1 1/ / x 19 1/ / x 1/ / x / x / x 1 / x / x 1/ / x 1 1/ / x 19 1/ / x 1/ PB01 00 Lamar Avenue / Mission, KS 0 / USA
6 Installation Instructions - 00 Series Couplings Pipe Stiffeners are required when using these products on polyethylene (P.E. pipe). Step 1: Clean working area of pipe ends. Step : Place coupling flanges on pipe ends. Step : Clean gaskets and install with lubricant suitable for potable waters systems. Beveled edge of gasket should face pipe ends. Step : Center coupling sleeve over pipe ends while maintaining recommended gap below. Slide gaskets against sleeve followed by flanges. Step : Install the bolts and hand-tighten the nuts. If carriage bolts are furnished, alternate direction of the bolts. Step : Gradually tighten nuts to proper torque values listed below, alternating between opposite sides of the coupling and keeping all parts centered about pipe. Tighten both nuts if studs are used. Step : Recheck torque after line pressurization. WARNING: This product does not restrain against axial pipe movement. Pipe forces due to internal pressure, thermal contraction, earth shifting, etc. can cause the pipe to pull out of the product and/or axial product movement unless the pipe and/or product is properly restrained from movement. Suitable anchorage devices, such as anchor studs, harness rods, joint restrainers, thrust block, etc. must be installed prior to filling pipes or applying pressure to prevent pipe pull out. Restraint may also be required to prevent axial product movement. This product must be installed in accordance with recommended procedures. Recommended Gap Between Pipe Ends " Sleeve 1/" to 1/" Gap " Sleeve 1/" to /" Gap " Sleeve 1/" to 1-1/" Gap Recommended Bolt Torque /1" Bolts 0 to ft. lbs. 1/" Bolts 0 to ft. lbs. /" Bolts 0 to 0 ft. lbs. /" Bolts to 9 ft. lbs. Pipe Size Maximum Angular Deflection Between Pipes " Sleeve Length " Sleeve Length " Sleeve Length 0. to..0 to 1.0-1/ -1/ 1.0 to.00-1/ -1/. to / -1/. to /. to / - 0. to / PB01 00 Lamar Avenue / Mission, KS 0 / USA
7 11 Steel Couplings Specially compounded gaskets of all new materials formulated to resist compression set. They absorb vibration, expansion, contraction and allow flexibility to the joint while maintaining a leak-resistant, resilient seal. Center sleeve made from carbon steel rolled to manufactures specifications. Followers of special steel rolled mill section, high-strength ductile iron or stamped high-strength, low alloy steel Coupling Parts Loose On Pipe Coupling Parts After Tightening Bolts The coupling is assembled on the pipes with the sleeve centered over the pipe ends, a wedge-shaped gasket engaging the conical inner surface on each end of the sleeve, a follower confining the outer surface of each gasket and the bolts joining the followers As the bolts are tightened, the followers are drawn toward each other compacting the gaskets in the cavity formed by the sleeve conical surface, follower and the pipe wall. This forms a flexible, leak-resistant, safe method of joining pipe. The coupling is floating on the pipe and stresses caused by expansion, contraction or angular defelction can be absorbed. PB01 00 Lamar Avenue / Mission, KS 0 / USA
8 11 Steel Couplings PARTS Our couplings consist of one cylinderical sleeve with conical inner surfaces at each end; two resilient, wedge-shaped, speciallycompounded rubber gaskets; two ring-shaped followers and a set of high-strength, low-alloy track-head, oval-neck, rolled-thread bolts with heavy hex nuts. 11 Steel Coupling Advantages No Special pipe end preperation required. Simple installation requires only a wrench. Pipe does not have to be cut to exact length. Exact alignment of pipe ends is not necessary Coupling fits on outside wall of pipe so there are no internal projections to disturb flow and no damage to the pipe lining. Many types of pipe, including pipes of different materials, can be joined. Every joint is a union (a length of pipe can be reomoved by disassembling the coupling). Coupling allows for limited expansion and contraction. Coupling dampens vibration. Deflection capability of coupling permits installation of curves or changes in grade without the use of special pipe fabrications. Coupling allows for angular deflection caused by settlement or lateral movement after installation. Coupling can be installed in any environment, so weather is not a factor. Fire hazard eliminated because no welding is required. Coupling increases the hoop strength of the pipe at the joint. FOR MORE INFORMATION or TO PLACE an order CONTACT IAC TODAY PB01 00 Lamar Avenue / Mission, KS 0 / USA
9 Cross reference chart Couplings & End Caps Smith-Blair Dresser Steel Couplings 11 Reg., STAB Steel Couplings 11 Long 0, STAB 0 Steel Couplings, Transition 1 1, TY.1 Steel Couplings, Reducing 1 TY. Steel Couplings, Insulating 1 9 Steel Couplings, Two Bolt 1 - Omni Cast Couplings System, Standard Sleeve 1 Omni Cast Couplings System, Long Sleeve Omni Cast Reducing Couplings 1 Quantum Coupling 1 - Quantum Coupling - Pipe End Caps, Steel 1 1 Pipe End Caps, Cast 1 Compression Couplings Long Expansion Joints Smith-Blair Dresser Plain Single End without Limit Rods 11 TY-1 with Limit Rods 1 TY- Plain Double End without Limit Rods TY- with Limit Rods TY- Tapping Sleeves Smith-Blair Dresser Carbon Steel Steel MJ Type - Side and End Seals - Steel MJ Type - Side and End MJ Gaskets - For Concrete Cylinder Pipe - Weld-On, Top Only - Weld-On, Full Body - Stainless Steel Body, Fab Lugs, with Carbon Steel Coated Flange 0 All Stainless Steel, Fab Lugs 0 Stainless Steel Body, V Lugs, with Carbon Steel Coated Flange 0 All Stainless Steel, V Lugs 0 Flanged Coupling Adapters Smith-Blair Dresser Cast 91 1 Steel 91 1 Steel Reducing 91 - Flanged Meter Adapters 9 11 Dismantling Joints Smith-Blair Dresser Dismantling Joint Dismantling Joint, Restraining 9 - Dismantling Joint, Restraining 9 - PB Lamar Avenue / Mission, KS 0 / USA
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
DRESSER TM PIPELINE SOLUTIONS
Wal-Rich Corporation is a master distributor of Dresser Pipeline Solutions, a trademark of GE. The following pages highlight the items that are in stock at our NY facility. For more information, please
Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.
Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,
WATER & SEWER CORROSIVE RESISTANT PRODUCTS
WATER & SEWER CORROSIVE RESISTANT PRODUCTS The Standard of Excellence in the Industry CASING SPACERS COUPLINGS & FLANGE COUPLING ADAPTERS REPAIR CLAMPS DUCTILE IRON SADDLES STAINLESS STEEL SADDLES TAPPING
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections
Pipe Repair Products A complete selection for all types of pipe
Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available
Ductile Iron Pipe Couplings
J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your
General Guidelines for Repairing Buried PE Potable Water Pressure Pipes
515 General Guidelines for Repairing Buried PE Potable Water Pressure Pipes Introduction Traditional piping systems have gasket-sealed bell and spigot joints every 20 feet, which can be a potential maintenance
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids The AMERICAN Mechanical Joint was developed by the American Cast Iron Pipe Company and first marketed in 1929. Since that time, millions
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
INDEX. Sec. No. Items Page Nos.
INDEX Sec. No. Items Page Nos. 1. Types of Pipe............... MSSP- 2 2. Concrete Pipe............... MSSP- 2 thru MSSP-3 3. ABS and PVC Truss Pipe............... MSSP- 3 4. ABS and PVC Solid Wall Pipe...............
JCM GENERAL PRODUCT DIRECTORY Effective March 1, 2010 Replaces 01/12/2007
JCM GENERAL PRODUCT DIRECTORY Effective March 1, 20 Replaces 01//2007 UNIVERSAL CLAMP COUPLINGS / REPAIR FITTINGS Page 1 Universal Clamp Coupling - Standard Range...4-2 Universal Clamp Coupling - Extended
Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
TECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
Ford Pipe Repair Products The Ford Meter Box Company, Inc.
Section L 7/2008 Ford Pipe Repair Products The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487 Overseas FAX:
Mechanical Joint Restraints
-15 PVC Pipe Restrainer The PVC mechanical joint restrainer eliminates the need for thrust blocking, tie rodding, or harnessing mechanical joint fittings when they are used with PVC pipe. The key to the
SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE
SECTION 33 11 00.11 POLYVINYL CHLORIDE (PVC) PIPE PART 1: GENERAL 1.01 SECTION INCLUDES PVC pressure pipe and fabricated fittings in nominal sizes 4-inches through 12-inches with cast iron pipe equivalent
SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL
SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL PART 1 - GENERAL 1.1 WORK INCLUDED IN THIS SECTION A. The WORK of this Section includes the repair, demolition, and disposal of asbestos
08003-1 WATER SERVICE 2
08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
2013 Edition. Flanged fittings 30"-64" NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61
30"-64" Ductile Iron industrial Applications, water & Wastewater 2 Table of Contents Flanged Fittings for Water 3 Flange Details 5 Flanged Fittings 6 90º and 45º Bend 6 22-1/2º and 11-1/4º Bends 7 Tees
Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal)
Universal Installation and Maintenance Instructions Double Wall Spill Containment Bucket (5 and 15 gal) IMPORTANT: It is imperative that the user read these warnings and use of the assembly instructions
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
SECTION 15056 DUCTILE-IRON PIPE AND FITTINGS
SECTION 15056 PART 1 GENERAL 1.01 DESCRIPTION This section includes materials and installation of ductile-iron pipe and fittings for potable and recycled water systems. A written request to use Ductile
Technical. Design Data. Advanced Solutions for Pipe Technology
Technical Design Data Advanced Solutions for Pipe Technology pipe CONNECTIONS, repair & flow control products for the utilities industry Contents Glossary of Terms 3 Glossary of Standards 4 Design Specifications
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer
Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer The user may choose to adopt part or all of this Model Specification; however, the user should ensure that all parts
MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water
MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org HDPE
Ford Service Saddles and Tapping Sleeves
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section AA 02/2015 Web Revision 12/17/2015 Ford Service Saddles and Tapping Sleeves Contents Page Recommended Product Application *Steel *C900 Cast
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Pipe Repair Products. For Water, Wastewater and Industrial Piping Systems. Custom Fabrication
Pipe Repair Products For Water, Wastewater and Industrial Piping Systems Repair Sleeves Reinforcing Sleeves Repair Clamps Band Clamps Collar Clamps Bell Joint Clamps Custom Fabrication For Complete Water
C. CR: Chlorosulfonated polyethylene synthetic rubber. E. EPDM: Ethylene-propylene-diene terpolymer rubber.
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
FULL FACE FLANGE-TYTE Gasket FOR FLANGED JOINTS
4"-64" FULL FACE FLANGE-TYTE Gasket FOR FLANGED JOINTS NSF FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS NSF P 2 Table of Contents Introduction 3 Pressure Performance 3 Torque Performance
SECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Section C-1 Pipes and Fittings
Section C-1 Pipes and Fittings C1.00 Work Included The work under this Division of the Specifications shall include all labor, materials, and equipment necessary to furnish and install all piping, pipelines,
SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
Mechanical Products. Mechanical Products M06-1
Products Products M06-1 3 TABLE OF CONTENTS 1. GENERAL DATA... 5 10 The Engineered Coupling...6 Features & Benefits...7 ISO 9001:2000 Certificate of Registration...8 Approvals...9 Manufacturing Process...10
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
Dresser * Pipeline Solutions
GE Oil & Gas Dresser * Pipeline Solutions Repair products for natural gas piping systems GE Oil & Gas offers natural gas pipeline industry customers an array of high-pressure repair products and solutions,
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
Couplings. Drain Couplings Standard Couplings Large Diameter Couplings Adaptor Couplings Flexible Saddles Bushes
Drain Couplings Standard Couplings Large Diameter Couplings Adaptor Couplings Flexible Saddles Bushes Flex-Seal couplings meet a range of UK and international legislation requirements and quality standards
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
OPERATION AND MAINTENANCE MANUAL 5-1/4 B-84-B-5 FIRE HYDRANT
OPERATION AND MAINTENANCE MANUAL 5-1/4 B-84-B-5 FIRE HYDRANT INDEX AMERICAN - DARLING 5-1/4 IN. B-84-B-5 FIRE HYDRANT OPERATION AND MAINTENANCE MANUAL OPERATION AND MAINTENANCE REPAIRS Operation and Maintenance...
American- Darling 5¼" B-84-B-5.
-5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which
AIR RELEASE, CLEANOUT, AND SEWER MANHOLES
AIR RELEASE, CLEANOUT, AND SEWER MANHOLES **From Hartford IM BLDG(10) DESCRIPTION. This work shall consist of the construction of air release, cleanout, and sanitary sewer manholes; and the furnishing
Section 3510: Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011
STANDARDS AND CONSTRUCTION MANUAL : Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011 PART 1 - GENERAL 1.01 SCOPE OF WORK A. These specifications cover the pipes, fittings, and appurtenances
CAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
Specification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe
Specification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe 1. GENERAL The following supplemental sewer main specifications are intended to address the installation of high-density polyethylene
SECTION 15064 PVC PRESSURE PIPE AWWA C900
SECTION 15064 PVC PRESSURE PIPE (AWWA C900) PART 1 GENERAL 1.01 DESCRIPTION This section includes materials, installation, and testing of polyvinyl chloride (PVC) pressure pipe conforming to AWWA C900.
SECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
SECTION 15410 GROUND WATER STORAGE TANKS
SECTION 15410 GROUND WATER STORAGE TANKS PART 1 GENERAL.01 SCOPE A. Section Includes Requirements for designing, fabricating, and erecting a welded steel ground storage tank..02 SYSTEM DESCRIPTION A. Design
DeZURIK 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT
3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT Instruction D10386 August 2013 Instructions These instructions provide installation, operation and maintenance information for BAW Butterfly Valves.
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
High Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
Quality & Innovation, Manufactured in the U.S.A.
Quality & Innovation, Manufactured in the U.S.A. Repair Clamps Couplings Expansion Joints Pipe Restraint Service Saddles Dismantling Joints Tapping Sleeves Tapping Machines HDPE Pipe Products Line-Stop
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION
SECTION 15125 HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS FOR WATER DISTRIBUTION AND TRANSMISSION PART 1 GENERAL.01 SECTION INCLUDES Furnishing and installing 4 inch through 16 inch high density
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
Application Guide. Compensators Hose Assemblies Expansion Joints FLEX-WELD INCORPORATED FLEX-WELD.COM. Manufactured By:
Compensators Hose Assemblies Expansion Joints Manufactured By: FLEX-WELD INCORPORATED FLEX-WELD.COM What we need to know... A. Physical / System Parameters 1 Size of Assembly: Measure Pipe size (ID) of
Installation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
1-800-654-3872 1-405-273-6302
Anodeless Risers Transition Risers Compression Risers Riser Accessories Transition Risers and Transitions The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com Risers and Transitions:
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
SECTION 02401 - SANITARY SEWER PIPE
PART 1 - GENERAL 1.1 DESCRIPTION A. The WORK under this Section includes providing all labor, materials, tools and equipment necessary for furnishing and installing sanitary sewer pipe, in accordance with
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
Green Thread Product Data
Green Thread Product Data Applications Dilute Acids Caustics Produced Water Industrial Waste Hot Water Condensate Return Materials and Construction All pipe manufactured by filament winding process using
SECTION 33 05 16.13 PRECAST CONCRETE UTILITY STRUCTURES
SECTION 33 05 16.13 PRECAST CONCRETE PART 1 - GENERAL 1.01 SECTION INCLUDES A. This item shall consist of the construction of both sanitary and storm sewer precast concrete manholes in accordance with
Installation instruction CASAFLEX - Connecting piece DN 100
1 CASAFLEX - 11 10 114,3 x 4,5 3 5 2 4 1 7 6 8 12 9 Do not begin work until you have read the installation instruction carefully. 1 internal backing sleeve 2 graphite packing 3 connecting piece 4 thrust
ROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
SECTION 603 SANITARY SEWER FORCE MAINS
SECTION 603 SANITARY SEWER FORCE MAINS 1. GENERAL Pipelines for sanitary sewer force main systems shall conform to the following specifications and shall be installed at the locations indicated on the
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Copper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
Hilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
RMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
The surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes.
QUALITY INSIDE When it comes to long life piping for drinking water, sewage, industrial water or gas, there is one name that continues to lead the way - ECOPUR by vonroll. Delivering precision-engineered
SECTION 3 SANITARY SEWER DESIGN
SECTION 3 SANITARY SEWER DESIGN 3.1 GENERAL DESIGN CRITERIA 3.1.1 Requirement for Sanitary Sewer 3.1.2 Design Approval 3.1.3 IEPA Permit Required 3.1.4 Differentiation Between Public and Private Sanitary
WEKO-SEAL Internal Joint Sealing WEKO-SEAL. internal pipe-joint sealing
WEKO-SEAL Internal Joint Sealing WEKO-SEAL internal pipe-joint sealing We know seals inside and out. Retaining Band Test Valve WEKO-SEAL WEKO-SEAL is the leading trenchless system for internally and economically
DUCTILE IRON PIPE JOINTS AND THEIR USES
DUCTILE IRON PIPE JOINTS AND THEIR USES Ductile Iron Pipe Joints and Their Uses By Richard W. Bonds, P.E. DIPRA Research and Technical Director Introduction Joints for Iron pipe have come a long way. About
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
Dock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
STANDARD SPECIFICATION SECTION 15292 POLYVINYL CHLORIDE (PVC) PRESSURE PIPE (AWWA C900)
STANDARD SPECIFICATION SECTION 15292 POLYVINYL CHLORIDE (PVC) PRESSURE PIPE (AWWA C900) PART 1 - GENERAL 1.01 DESCRIPTION This section includes materials, installation, and testing of PVC pressure pipe
SECTION 6 SANITARY SEWER MAIN 6.01 SCOPE
6.01 SCOPE The work covered by this section of the specifications consists of the furnishing of all plant, labor, materials, equipment and supervision and performing all operations involved in the construction
BETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS
BETTIS CONVERSION INSTRUCTIONS TO CONVERT HD SERIES ACTUATORS TO HD-M3, HD-SR-M3 HD-M3HW OR HD-SR-M3HW SERIES PNEUMATIC ACTUATORS PART NUMBER: 132581 REVISION: A RELEASE DATE: 24 March 2000 Page 1 of 10
Section 02702 SEWER PIPE INSTALLATION AND TESTING
PART 1 - GENERAL Section 02702 SEWER PIPE INSTALLATION AND TESTING 1-1. SCOPE. This section covers the installation and testing of all sewer pipe furnished under the following specification sections: Concrete