Open Rail Track System for Sliding Doors. Track and Hardware Specialists
|
|
|
- Emery Simpson
- 7 years ago
- Views:
Transcription
1 Track and Hardware Specialists Open Rail Track System for Sliding Doors KTA2 Open Rail (Round) KTA7 Open Rail (FLat) A8 Open Rail (Flat), All Stainless Steel Tomorrow s Innovative Solutions for Today s Doors & Windows The DS Group Of Companies: Draftseal, Kristrack, Eclipse Architectural & DSD Hardware KTA2, KTA7 & KTA8 Open Rail Track Systems for Sliding Doors Revision (1) February 12, 2016 This brochure may not be up to date. Always refer to website for most up to date content.
2 KTA2 Open Rail (Round) Track System & Hardware for Wood Doors FACE MOUNT APPLICATION - MAX DOOR WEIGHT: 210 LBS (95 KG) HALF SCALE NEW PRODUCT roller 2 track lengths available 19-11/16 (500mm) 19-11/16 (500mm) 79-3/32 (2009mm) 19-11/16 (500mm) 19-11/16 (500mm) 19-11/16 (500mm) 98-25/32 (2509mm) Each kit includes: 1 track 4 brackets (78 track) or 5 brackets (98 track) 2 rollers / hangers 1 guide 2 stops NOTE: Individual replacement parts available 19-11/16 (500mm) 19-11/16 (500mm) wallmount bracket screw and plug 15/32 (11.6mm) from wall to face of. If more clearance is required then bracket spacers are available wall 9/16 (15mm) KTSD15SPACER Optional spacer not included with kit, order separately round rail or 9/32 (7mm) stop anti-jump pin 25/32 (20mm) hanger 1-25/32 (45mm) 2-5/32 (55mm) 8-9/32 (210.5mm) finished floor line KTA2FGUIDESS Floor guide, metal KT116 Guide KTA2RAILCONSS Connector piece, connects 2 pieces of track end to end. Order separately. 1 (25mm) KT116 Optional adjustable bottom guide (metal & plastic). Order separately. KTA2SS78FMKIT A2 Round rail, stainless steel, 78 with 4 brackets, 2 stops, 2 hangers face mount, 1 guide KTA2SSBL78FMKIT A2 Round rail, black, 78 with 4 brackets, 2 stops, 2 hangers face mount, 1 guide KTA2SS98FMKIT A2 Round rail, stainless steel, 98 with 5 brackets, 2 stops, 2 hangers face mount, 1 guide KTA2SSBL98FMKIT A2 Round rail, black, 98 with 5 brackets, 2 stops, 2 hangers face mount, 1 guide NOTE: For biparting double s, 2 of the above kits are required plus one connector piece (KTA2RAILCONSS) KTA2RAILCONSS A2 Connector piece, stainless steel, for joining 2 rails end to end KTA2RAILCONSSBL A2 Connector piece, stainless steel black, for joining 2 rails end to end 2 All drawings NO SCALE, except as noted Copyright 2016 DS Group & KrisTrack
3 KTA2 Open Rail (Round) Track System & Hardware for Wood Doors TOP MOUNT APPLICATION - MAX DOOR WEIGHT: 187 LBS (85 KG) HALF SCALE NEW PRODUCT roller 2 track lengths available 19-11/16 (500mm) 19-11/16 (500mm) 79-3/32 (2009mm) 19-11/16 (500mm) 19-11/16 (500mm) 19-11/16 (500mm) 98-25/32 (2509mm) Each kit includes: 1 track 4 brackets (78 track) or 5 brackets (98 track) 2 rollers / hangers 1 guide 2 stops NOTE: Individual replacement parts available 19-11/16 (500mm) 19-11/16 (500mm) wallmount bracket screw and plug 1-5/32 (29.3mm) from wall to face of. wall round rail anti-jump pin or 9/32 (7mm) 4-1/32 (102.5mm) stop hanger KTA2FGUIDESS Floor guide, metal 25/32 (20mm) KT116 Guide finished floor line 31/32 (24.5mm) KT116 Optional adjustable bottom guide (metal & plastic). Order separately. KTA2RAILCONSS Connector piece, connects 2 pieces of track end to end. Order separately. KTA2SS78TMKIT A2 Round rail, stainless steel, 78 with 4 brackets, 2 stops, 2 hangers top mount, 1 guide KTA2SSBL78TMKIT A2 Round rail, black, 78 with 4 brackets, 2 stops, 2 hangers top mount, 1 guide KTA2SS98TMKIT A2 Round rail, stainless steel, 98 with 5 brackets, 2 stops, 2 hangers top mount, 1 guide KTA2SSBL98TMKIT A2 Round rail, black, 98 with 5 brackets, 2 stops, 2 hangers top mount, 1 guide NOTE: For biparting double s, 2 of the above kits are required plus one connector piece (KTA2RAILCONSS) KTA2RAILCONSS A2 Connector piece, stainless steel, for joining 2 rails end to end KTA2RAILCONSSBL A2 Connector piece, stainless steel black, for joining 2 rails end to end Copyright 2016 DS Group & KrisTrack All drawings NO SCALE, except as noted 3
4 KTA7 Open Rail (FLat) Track System & Hardware for Wood Doors FACE MOUNT APPLICATION - MAX DOOR WEIGHT: 220 LBS (100 KG) HALF SCALE NEW PRODUCT hanger Featuring the BOM Black roller, stronger than nylon. Each kit includes: 1 track 5 brackets (78 track) or 6 brackets (98 track) 2 rollers / hangers 1 guide 2 stops NOTE: Individual replacement parts available screw & plug roller flat rail stop 11-13/32 (290mm) Anti-jump disc 2 track lengths available 3-15/16 (100mm) 4-15/16 (125mm) 1-1/8 (28.5mm) 3 (80mm) 17-11/16 (450mm) 78-3/4 (2000mm) 17-11/16 (450mm) 1-3/5 (40mm) KTA7CON Connector piece, connects 2 pieces of track end to end. Order separately. 98-7/16 (2500mm) 13/32 (10mm) KTA8S10MM Optional spacer not included with kit, order separately 17/32 (13.8mm) 27/32 (21.8mm) 17/32 (13.3mm) 27/32 (21.3mm) from wall to face of. If more clearance is required bracket spacers are available wall 1-9/16 (40mm) 3-17/32 (90mm) KTA7GUIDEBL Floor guide, plastic finished floor line KTA7SS78FMKIT A7 Flat bar, stainless steel, 78 with 5 brackets, 2 hangers face mount, 1 guide, 2 stops KTA7BLACK78FMKIT A7 Flat bar, black, 78 with 5 brackets, 2 hangers face mount, 1 guide, 2 stops KTA7BROWN78FMKIT A7 Flat bar, brown, 78 with 5 brackets, 2 hangers face mount, 1 guide, 2 stops KTA7SS98FMKIT A7 Flat bar, stainless steel, 98 with 6 brackets, 2 hangers face mount, 1 guide, 2 stops KTA7BLACK98FMKIT A7 Flat bar, black, 98 with 6 brackets, 2 hangers face mount, 1 guide, 2 stops KTA7BROWN98FMKIT A7 Flat bar, brown, 98 with 6 brackets, 2 hangers face mount, 1 guide, 2 stops NOTE: For biparting double s, 2 of the above kits are required plus one connector piece (KTA7CON) KTA7CONSS A7 Connector piece, stainless steel, for joining A7 flat bar end to end KTA7CONBLACK A7 Connector piece, black, for joining A7 flat bar end to end KTA7CONBROWN A7 Connector piece, brown, for joining A7 flat bar end to end KT116 Guide KT116 Optional adjustable bottom guide (metal & plastic). Order separately. 4 All drawings NO SCALE, except as noted Copyright 2016 DS Group & KrisTrack
5 KTA7 Open Rail (FLat) Track System & Hardware for Wood Doors TOP MOUNT APPLICATION - MAX DOOR WEIGHT: 220 LBS (100 KG) HALF SCALE NEW PRODUCT hanger Featuring the BOM Black roller, stronger than nylon. Each kit includes: 1 track 5 brackets (78 track) or 6 brackets (98 track) 2 rollers / hangers 1 guide 2 stops NOTE: Individual replacement parts available screw & plug Anti-jump disc roller flat rail 4-5/8 (117.5mm) stop 2 track lengths available 3-15/16 (100mm) 4-15/16 (125mm) 17-11/16 (450mm) 78-3/4 (2000mm) 17-11/16 (450mm) 1-3/5 (40mm) 98-7/16 (2500mm) 11/16 (17.8mm) from wall to face of. if more clearance is required then bracket spacers are available wall KTA7GUIDEBL Floor guide, plastic finished floor line 1-1/8 (28.5mm) 3 (80mm) 1/2 (13mm) KTA7CON Connector piece, connects 2 pieces of track end to end. Order separately. KTA7SS78TMKIT A7 Flat bar, stainless steel, 78 with 5 brackets, 2 hangers top mount, 1 guide, 2 stops KTA7BLACK78TMKIT A7 Flat bar, black, 78 with 5 brackets, 2 hangers top mount, 1 guide, 2 stops KTA7BROWN78TMKIT A7 Flat bar, brown, 78 with 5 brackets, 2 hangers top mount, 1 guide, 2 stops KTA7SS98TMKIT A7 Flat bar, stainless steel, 98 with 6 brackets, 2 hangers top mount, 1 guide, 2 stops KTA7BLACK98TMKIT A7 Flat bar, black, 98 with 6 brackets, 2 hangers top mount, 1 guide, 2 stops KTA7BROWN98TMKIT A7 Flat bar, brown, 98 with 6 brackets, 2 hangers top mount, 1 guide, 2 stops NOTE: For biparting double s, 2 of the above kits are required plus one connector piece (KTA7CON) KTA7CONSS A7 Connector piece, stainless steel, for joining A7 flat bar end to end KTA7CONBLACK A7 Connector piece, black, for joining A7 flat bar end to end KTA7CONBROWN A7 Connector piece, brown, for joining A7 flat bar end to end KT116 Guide KT116 Optional adjustable bottom guide (metal & plastic). Order separately. Copyright 2016 DS Group & KrisTrack All drawings NO SCALE, except as noted 5
6 KTA8 All Stainless Steel Open Rail Track System for Sliding Doors 6 Copyright 2016 DS Group & KrisTrack
7 A8 Open Rail (Flat) Track System for Sliding Doors, All Stainless Steel Top Mount Side View 2-21/32 (67.5mm) 1-5/16 (33.6mm) Face Mount Side View 2-21/32 (67.5mm) 2 (51mm) 1-1/32 (26.6mm) 5-23/32 (145mm) 5-23/32 (145mm) 1-1/32 (26mm) (44.5mm) finished floor line OPTION 1 Channel installed into bottom of grooved, KT127 roller guide mounted to floor KT23 channel with PVC insert 1/4 (6mm) 2-1/32 (51mm) 11/16 (17.6mm) 5/8 (16mm) 11-13/16 (300mm) KTA8 Door stop 2-21/32 (67.5mm) 1-5/16 (33.6mm) (44.5mm) 2 (51mm) 1-1/32 (26.6mm) 1-1/32 (26mm) 3/16 (5mm) (44.5mm) 5-23/32 (145mm) OPTION 2 Guide fastened to jamb jamb KT116 guide OPTION 3 Roller guide mounted to bottom of 1/4 (6mm) 7/8 (22mm) 15/16 (24mm) floor channel flush with finished floor KT23 channel with PVC insert ARCHITECTURAL SPECIFICATIONS Max weight: 650 lbs (300kg) = 2 carriers Max : 2-1/4 (57.15mm) Max width: 144 (12 ft / 3658mm) Max height: 144 (12 ft / 3658mm) Panel Sizing Open rail: flat bar stainless steel 304 (brushed or black) Carriers: all stainless steel (face mount or top mount) Door stop: all stainless steel with rubber bumpers Floor channel: aluminum with pvc channel insert, bronze anodized Guides: jamb mounted or floor mounted or bottom of mounted Weight dictates dimensions, however for panels over 10 ft. (3000mm) wide, use three carriers for additional lateral support. If using three, adjust the middle carrier high to avoid it bearing any load. Copyright 2016 DS Group & KrisTrack All drawings NO SCALE, except as noted 7
8 KTA2 Open Rail (Round) Track System FACE MOUNT APPLICATION KTA2 Open Rail (Round) Track System TOP MOUNT APPLICATION Tomorrow s Innovative Solutions for Today s Doors & Windows The DS Group Of Companies: Draftseal, Kristrack, Eclipse Architectural & DSD Hardware Head Office & Manufacturing Centre, Vancouver, Canada 7470 Buller Avenue, Burnaby, B.C. V5J 4S5 Canada Phone: (604) Fax: (604) info@thedsgroup.com Outside Vancouver, B.C., please use our toll free numbers: Phone: Fax: Branch Office & Distribution Centre, Toronto, Canada Phone head office toll free for branch address Branch Office & Distribution Centre, Los Angeles, California Phone head office toll free for branch address Eclipse Architectural Corporate Showrooms Vancouver & Toronto, Canada Los Angeles, California, USA THE DS GROUP IS THE BRAND IMAGE OF A.K. DRAFT SEAL LTD.
How To Fit A Portman Door Leaf
Portman Sliding Door Gear Timber/Frames Doors Frameless Glass Doors Top track Portman top tracks are suitable for door leaves of up to 80kg as standard Material is 6063T6 aluminium alloy anodised to 15
CI/SfB. (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems
Uniclass L4181 EPIC D181 CI/SfB (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems Interior Sliding Door Gears FOR CUPBOARDS, WARDROBES, INTERIOR SLIDING AND FOLDING DOORS A comprehensive range of
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
CLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
CLEAR-DIVISIONS APERTO
CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the
EXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
CLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
glass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
Stair Railing. Installation Guide
Stair Railing Installation Guide THE BEST CHOICE FOR STRONG & DURABLE RAILING SYSTEMS Our exclusive manufacturing process ensures our vinyl railing will provide superior strength plus it is virtually maintenance
Slides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
Installation Instructions
READ BEFORE INSTALLING UNIT For Through-the-Wall Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
Interior Pocket Door System. A hiding gliding sliding door
Interior Pocket Door System hiding gliding sliding door Introduction good fit for you & the room too Our range of Whatever the style or budget we ve got a choice of 3 sliding pocket door systems that will
Automatic Door Selection Guide
Automatic Door Selection Guide AAADM 1300 Sumner Avenue Cleveland, OH 44115 P: 216-241-7333 F: 216-241-0105 aaadm@aaadm.com Automatic Door Selection Guide General: The members of AAADM manufacture an assortment
Sliding Barn Door Hardware Installation Instructions BALDUR and ODEN
Sliding Barn Door Hardware Installation Instructions BALDUR and ODEN Installation Instructions Structural Information For standard systems and most custom single door opening systems. General Overview
Casement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
INSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
Sliding Door Hardware Bi-fold By-Pass Pocket
Sliding Door Hardware Bi-fold By-Pass Pocket Sliding Door Hardware The John Sterling Sliding Door Hardware products offer a complete line of hardware for interior sliding Bi-Fold doors, By-Pass doors,
All-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
Sliding Door Hardware Installation Instructions
Sliding Door Hardware Installation Instructions Installation Instructions Structural Information For standard systems and most custom single door opening systems. General Overview ff All Krown Lab sliding
Installation Instructions
Installation Instructions READ BEFORE INSTALLING UNIT For Low Profile Window Air Conditioner INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Follow each step
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
Installation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
280+ Mortise Mounted Series Shear Locks Special Application Solution
280+ Mortise Mounted Series Shear Locks Power Plus control module overcomes gaps of up to 1/4" Low Temperature Operation 280+ TRD Locknetics provides the industry s most complete selection of electromagnetic
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
DESIGN BY: ARCH. GIUSEPPE INZITARI
DESIGN BY: ARCH. GIUSEPPE INZITARI 218 FOR HIGH THICKNESS FROM 12 TO 17.5 MM - GIUMAX GIUMAX 9500 Page 220 GIUMAX 8500 Page 227 ROLLERS Page 233 GIUMAX 4500 Page 236 GIUMAX 6500 Page 244 FROM 8 TO 12 MM
DIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
DE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
Integral Kit Instructions
Integral Kit Instructions For Fisher & Paykel Cabinet widths of 525, 635, 680, 790 mm wide For curved door Models Series B, C, D & G Manual 814980 Updated August 2008 IMPORTANT If your refrigerator has
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
Cluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
MODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
Can you design a frameless shower enclosure that doesn't leak?
Can you design a frameless shower enclosure that doesn't leak? With proper design and installation frameless shower enclosures should not have any problems with water leakage, but they are not 100 percent
Technical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
Installation Instructions and Ordering Information
The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using
Models A spe n, Econoline C o l o n i al. and Savoy. Installation Instructions. Contractors Wardrobe
Installation Instructions Models A spe n, Econoline C o l o n i al and Savoy Contractors Wardrobe DESIGNERS MANUFACTURERS TOLL FREE: (800) CW-DOORS (800) 293-77 www.cwdoor.com 2121 Avenue Hall Valencia,
HOW TO MEASURE YOUR CUSTOM WINDOW SCREENS
HOW TO MEASURE YOUR CUSTOM WINDOW SCREENS Determining the actual size and hardware needs for your windows are the most important aspects of ordering your screens. Window screens come in a variety of styles,
39HQ Airovision Air Handling Units
39HQ Airovision Air Handling Units Mounting instructions CONTENTS 1 - TRANSPORT AND LIFTING INSTRUCTIONS... 3 1.1 - General... 3 1.2 - Transport and storage... 3 1.3 - Roof edge protection during transport
Premier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
Product Management - Glass ALEXA PRODUCT PRESENTATION. Region SAARC Nitin Lloyd, Product Management. Chennai, FY 2013 / 2014
Product Management - Glass ALEXA PRODUCT PRESENTATION Region SAARC Nitin Lloyd, Product Management Chennai, FY 2013 / 2014 PRODUCT MANAGEMENT - GLASS Alexa Partitioning Systems DESIGN: Slim Profile system
Wall Mounted Products
Metallic Indoor PK Termination Boxes Prysmian Part Numbers: see below Metallic PK Termination Boxes are designed for the termination, branching and distribution of fibre optic cables in telecommunication,
BUILD A TABLETOP LOOM
BUILD A TABLETOP LOOM From 1" x 2" stock (actual 3/4" x 1"1/2) cut: 4 pieces 15" long 4 pieces 5"1/2 long Use the above to make 2 frames for the front and back of the loom. From 1" x 4" stock (actual 3/4"
HMMA 810 HOLLOW METAL DOORS HOLLOW METAL MANUAL -87 NAAMM STANDARD FOURTH EDITION METAL DOORS & FRAMES NAAMM 2 NAAMM 2 METAL DOORS & FRAMES
HOLLOW METAL MANUAL NAAMM STANDARD HMMA 810-87 8d METAL DOORS & FRAMES NAAMM 2 87 HOLLOW METAL HOLLOW METAL DOORS FOURTH EDITION NAAMM 2 87 8d METAL DOORS & FRAMES A Division of NATIONAL ASSOCIATION OF
Assembly GUIDE. display wine cellar kits. Required. Suggested. Questions? 888.373.6057. or visit wineracksamerica.com
Page 1 Middle Ladder End Ladder Display Tray Screwless Connector Package Contents * All models follow the same assembly procedure varying only in the number of middle ladders your rack will require. Depending
INSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************
Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt
Concepts. Products. Service. Lindner Plus Organisation
Concepts Products Service Lindner Plus Organisation Building new solutions. Lindner undertakes major worldwide projects in all areas of interior finishes, insulation technology, industrial services and
Installation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
SECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
majestic install ation guide barcelona three sided enclosure 24mm surface mounted wall channels and underframe to base
majestic install ation guide barcelona three sided enclosure 24mm surface mounted wall channels and underframe to base These Instructions are for a left and right handed unit. The diagrams show a left
How you select and where to install me! Kitchen BE CAREFUL OF FOLLOWING PARAMETERS : A- Plumbing space needed (specifically the height).
Environment, recycling, selective collect Today, to convert a house to recycling, a house should have necessary methods and tools. Richelieu, always ahead of practical solutions, offers management and
Packaged Terminal Air Conditioner Wall Sleeve Installation
Installation & Maintenance Data IM 1196 Group: PTAC Part Number: 910141799 Date: October 2013 Packaged Terminal Air Conditioner Installation x 42" PGAN with Top-Mounted Hydronic Heat Note: Installation
BUTTERFLY SHOWER DOOR INSTALLATION INSTRUCTIONS
BUTTERFLY SHOWER DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
ΑΡΧΙΤΕΚΤΟΝΙΚΑ ΣΥΣΤΗΜΑΤΑ ΑΛΟΥΜΙΝΙΟΥ ARCHITECTURAL ALUMINIUM SYSTEMS
ΑΡΧΙΤΕΚΤΟΝΙΚΑ ΣΥΣΤΗΜΑΤΑ ΑΛΟΥΜΙΝΙΟΥ ARCHITECTURAL ALUMINIUM SYSTEMS NORMAL SLIDING and SLIDING WITH THERMAL BREAK A L U M IN IU M S Y S T E M S 32 SERIES 32 SLIDING. : 9045 815 gr/m 475 mm -25-25 - FOR
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
VISCO WEATHER SEAL PRODUCTS. VISCO Weather Seal Products 7 Victory Avenue Johnston, RI 02919 1-800-628-9680 www.viscoproduct.com
VISCO Weather Seal Products 7 Victory Avenue Johnston, RI 02919 1-800-628-9680 www.viscoproduct.com INTRODUCTION Visco Produces Industry-Leading Weather Seal Products Visco Weather Seal Products has 50
Seismic Installation for Attic Storage System
Your Performance Partner Seismic Installation for Storage System CONTENTS SSafety Precautions................................. 2 Required Tools..................................... 2 Parts and Fastener
Removable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
WASHROOM UPGRADE SIR CHARLES TUPPER BUILDING 2250 RIVERSIDE DRIVE, OTTAWA, ON SIR CHARLES TUPPER BUILDING A0.0 COVER SHEET / DRAWING LIST
0 RIVERSIDE DRIVE, OTTAWA, ON A0.0 COVER SHEET / DRAWING LIST A0. LEGEND AND GENERAL NOTES A0. GENERAL NOTES A0. GENERAL NOTES A0. TYPICAL WASHROOM WALL/SINK SECTION A0. DETAIL - CONTROL JOINT A0. DETAIL
Retail Reception kiosk
Retail Reception kiosk put 42" corner post in below 66" to allow post to extend above kiosk for raised box sign Mini cantilever option - 24" overhead support leg Mini cantilever option - 24" overhead 66/48E
BYPASS TUB ENCLOSURE... 12 SLIDING DOOR AND FIXED PANEL SLIDING DOOR AND FIXED PANEL WITH RETURN PANEL SLIDING DOOR AND FIXED PANEL
HIGH PRECISION, QUALITY AND PERFORMANCE FEATURES... 2-3 IN-LINE BYPASS... 5-8 BYPASS SLIDING DOORS 2 SIDED BYPASS... 9-11 BYPASS SLIDING DOORS WITH RETURN PANEL BYPASS TUB ENCLOSURE... 12 BYPASS SLIDING
ALUMINIUM SYSTEMS S.A.
ΡΟΛΑ ΑΠΛΑ και ΘΕΡΜΟΜΟΝΩΤΙΚΑ NORMAL & THERMAL INSULATING ROLLER SHUTTERS ALUMINIUM SYSTEMS S.A. ALUMINIUM SYSTEMS S.A C.AL.COM,.,,,.,,.. C.AL.COM. C.AL.COM. About us C.AL.COM is a modern dynamic commercial
InForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
BAKA Protect Series 2000 / 4000. Protect. The adjustable hinge system for timber entrance doors
BAKA Protect Series 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index 3D-Rendering, similar to ill. BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally
Part Name/Description Part Number Quantity. Power Cable 4000950-5 1
Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Power Cable 4000950-5 1 Raven Harness Adapter Kit 4100525 1 Installation Instructions
CONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.
14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined
AMF Line; wall absorbers Wall mounted acoustic designs PERFORMANCE CEILINGS. M ore s c op e f or i n n ovat i on MADE IN GERMANY
PERFORMANCE CEILINGS M ore s c op e f or i n n ovat i on AMF Line; wall absorbers Wall mounted acoustic designs MADE IN GERMANY 138568_Prospekt Wandabsorber_GB int.indd 1 Acoustic elements on the wall
Furniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
City of San Diego, CWP Guidelines
PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,
Call for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
Shelf Support Systems
Shelf Support Systems Cabinet Hardare - Shelving and Bookcase Strip Cabinet Hardare Shelf Support Systems Four different styles of bookcase strip and five shelf support stud designs combine to create an
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty Page 1 Table of Contents Introduction Page 3 Overview Page 3 Setup and Operation Page 5 Remote Control Page 6 Power Management Page
Customized Server Cabinets
GOING GREEN WITH CUSTOMIZABLE CABINETS AND RACKS Designed to provide industry leading airflow, CyrusOne s cabinets and rack solutions promote optimal cooling and contribute to reduced power consumption.
WHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
EXPLORE 4-Leg Teaming Table with Screen Share Assembly Instructions
EXPLORE 4-Leg Teaming Table with Screen Share Monitor Display Requirements: your flat panel display must confirm to the following requirements. y With the stand removed, the monitor must not exceed 40
9300BC SERIES Light Commercial Door Closer
Light Commercial Door Closer general information The 9300BC is a durable, economically priced door closer designed for commercial exterior and interior doors such as storefront and industrial applications.
Andersen Clad Inswing Entry Doors (2001 to Present)
Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts
INSTALLATION INSTRUCTIONS
door frames Engineered product systems INSTALLATION INSTRUCTIONS door frames MINIMALIST DOOR FRAME Fry Reglet Flush Door frames are designed for use with 3 5/8 studs with ½ drywall both sides (4 5/8 throat
Table of Contents. www.hunterfan.com. What to Expect with. Preparation. Tools Needed. Wiring. Hanging the Fan. Blades. Motor Housing.
www.hunterfan.com Table of Contents What to Expect with Your Installation 30 inches Hanging the Fan Wiring 8 Maintenance, Operation & Cleaning Light Kit 13??? 14 1 9 Troubleshooting 11 5 Blades Motor Housing
Residential Deck Safety, Construction, and Repair
Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the
AirBlock Data Center Doors
Data Center Doors AirBlock Data Center Doors What makes AirBlock the best? Works with your existing hot aisle/cold aisle isolation system. Doors accommodate different racks within the same data center;
INDUSTRIAL & COMMERCIAL DOOR HARDWARE
C R O W N I N D U S T R I A L INDUSTRIAL & COMMERCIAL DOOR HARDWARE "BARN DOOR HARDWARE" SLIDE DOOR HARDWARE SWING DOOR HARDWARE SLIDE-FOLD DOOR HARDWARE 213 MICHELLE COURT SOUTH SAN FRANCISCO, CA 94080
SPECIALTY DOOR HARDWARE
SPECIALTY DOOR HARDWARE RICHARDS-WILCOX HARDWARE ADVANTAGES STANDARD OF THE INDUSTRY Manufacturing since 880 in Aurora, IL...most experience in the industry Standard capacities up to 5000 pounds...heaviest
Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
Accessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
AMS 120. EFT Guest Card Terminal & Refund unit
AMS 120 EFT Guest Card Terminal & Refund unit ACCOUNT MANAGEMENT STATIONS Wall mounted kiosk offering Visitor card purchase and refund Card deposit EFT purchase, refund and loading Full statement facilities
OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE
OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE Scaletron Industries, Ltd. Bedminster Industrial Park 53 Apple Tree Lane P.O. Box 365 Plumsteadville, PA 18949 USA Toll Free: 1-800-257-5911 (USA &
swimming pool accessories
76 swimming pool accessories 77 Dolphin pool cleaners Dolphin Plus Battery Cordless pool cleaner with lithium ion battery Cleans the pool in 1.5 hours Special programs Clogged filter bag indicator Incl.
I BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
Section #7 Pictorial Table Of Contents. Self Tapping Screws. Pages 918-919 Page 918 Pages 920-921. Tool Hangers. Page 926 Page 927.
Introduction To Section # Pictorial Table Of Contents How To Order End Caps Self Tapping Screws T-Slot Covers T-Slot Tread Strips Metric Laminated Table Tops & Kits Page 916 Page 91 Pages 918-919 Page
Ref: GA13UK Glass Awning Support System
Ref: GA13UK Glass Awning Support System Give any entrance an uncomplicated, graceful look, enhancing the design of any building. Installation LAMINATED TOUGHENED GLASS High grade 316 stainless steel for
AirBlock Data Center Doors
Data Center Doors AirBlock Data Center Doors What makes AirBlock the best? Works with your existing hot aisle/cold aisle isolation system. Doors accommodate different racks within the same data center;
Stair Parts Installation. Tricks
Stair Parts Installation Tips & Tricks Introduction Your DIY staircase guide Welcome to the Stairpart home installation guide. Your stairway is both a functional and focal point in your home, so keeping
Residential Garage Door Terminology
A Air Infiltration: The leakage or passage of air through a door system Anodize: A hard non-corrosive oxide film on the surface of aluminum Astragal: A compressible or deformable seal provided on the bottom
DUMP TARP KITS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS
ELECTRIC TARP & MANUAL SYSTEMS DUMP TARP KITS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS TRAILER TARP KITS PARTS & ACCESSORIES
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS TheRTAStore.com STEP 1: CLEAR A WORK SPACE Place your RTA cabinet panels on a smooth, scratch resistant surface in a large, open area. (Some people like to
ColdGuard Bi-PARTING DOOR INSTALLATION INSTRUCTIONS
EHD TRACK LEVEL, (SET LEVEL ON PLASTIC HEADER. DO NOT PLACE LEVEL ON ALUMINUM TRACK.) TRACK IS FLUSH WITH TOP OF HEADER JUNCTION BOX IDLER PULLEY LOCATOR PINS LOCATOR PINS OPERATOR DOOR STOP JUNCTION BOX