- 9_12TI7972-QUIZ2 - Print Test
|
|
|
- Magnus Walker
- 7 years ago
- Views:
Transcription
1 Page 1 of 7 Report: Test Answer Key District: Madison Test: Description: Unit C Mfg Part 1 Form: The metal object produced by pouring molten metal into a mold consisting of wet green sand is: (NCCTE.9_12.TI.7972.D403.01) 2. Which material would LEAST likely be used for sand casting? (NCCTE.9_12.TI.7972.D403.01) 3. Metal objects produced by hammering or pressing metal into a desired shape while it is hot are: (NCCTE.9_12.TI.7972.D403.01) 4. CNC reduces errors and increases: (NCCTE.9_12.TI.7972.D403.01) Forged. Casted. Extruded. Injection molded. Aluminum Brass Iron Cold rolled steel Forged. Casted. Extruded. Injection molded. Surface area. Surface finish. Surface hardness. Productivity.
2 Page 2 of 7 5. Which one of the following is NOT an advantage of CNC machining? (NCCTE.9_12.TI.7972.D403.01) 6. The smallest division on a machinist steel rule is: (NCCTE.9_12.TI.7972.D403.01) 7. The device used in a machine shop for taking rough measurements is called a/an: (NCCTE.9_12.TI.7972.D403.01) 8. Which is NOT an advantage of CNC machining? (NCCTE.9_12.TI.7972.D403.01) 9. The acronym for controlling movements of tool- cutting equipment by coded instructions of numerical data is referred to as: (NCCTE.9_12.TI.7972.D403.01) Better production and control Increased productivity Decreased labor and production costs High up-front costs 1/16 inch. 1/32 inch. 1/64 inch. 1/128 inch. Machinist steel rule. Vernier caliper. Inside spring caliper. Metric scale. Worse production and control Decreased productivity Increased labor cost Lower production costs CAD CAM. CN CIM.
3 Page 3 of Which process works by taking a sheet of plastic material and heating it until it softens and then using vacuum pressure to suck the hot material down against a mold? (NCCTE.9_12.TI.7972.D403.01) 11. Which plastic process is used to make all types of thin-walled products such as containers, guards, fenders, food packages, and cosmetic packaging? (NCCTE.9_12.TI.7972.D403.01) 12. Which plastic process is used to make continuous shapes such as moldings, tubing, bars, water-hose, weather stripping, and any part that has a constant shape? (NCCTE.9_12.TI.7972.D403.01) 13. Which manufacturing process does NOT apply to plastics? (NCCTE.9_12.TI.7972.D403.01) Extrusion Forging Blow molding Injection molding Extrusion Forging Blow molding Injection molding
4 Page 4 of What is the process in which plastic material can be reheated in order to change the shape of a part? (NCCTE.9_12.TI.7972.D403.01) 15. Which process would be the BEST for a plastic part that is to be used on or near the engine of a car? (NCCTE.9_12.TI.7972.D403.01) 16. Plastic products that are formed into a permanent shape by heat and pressure and may not be altered after curing are produced by which process? (NCCTE.9_12.TI.7972.D403.01) 17. Hardening requires heating and then rapid cooling in: (NCCTE.9_12.TI.7972.D403.01) 18. Annealing is the process generally used to: (NCCTE.9_12.TI.7972.D403.01) Oil or water. Gas or kerosene. Dry ice. Mineral sprits. Corrode metal. Break-up metal. Harden metal. Soften metal.
5 Page 5 of Ceramic materials are said to be resistant to: (NCCTE.9_12.TI.7972.D403.01) 20. Carbon and graphite are low tensile strength materials meaning that they have the ability to be: (NCCTE.9_12.TI.7972.D403.01) 21. Inorganic materials consist of: (NCCTE.9_12.TI.7972.D403.01) 22. Nonferrous metals do not have iron content, such as: (NCCTE.9_12.TI.7972.D403.01) 23. Ferrous metals contain: (NCCTE.9_12.TI.7972.D403.01) Heat, chemicals, and corrosion. Cold, hardening, and decay. Climate, breaking, and children. Dry ice, chemicals, and rust. Prolonged. Shortened. Welded. Stretched. Thermoplastics and thermoset. Carbon, ceramics, and composites. Copper and aluminum. Carbonate and graphite. Copper and aluminum. Two or more metals. Iron and steel. Carbon and graphite. Copper and aluminum. Two or more metals. Carbon and graphite Iron and steel.
6 Page 6 of Metals are generally classified as: (NCCTE.9_12.TI.7972.D403.01) 25. What are the three general categories that manufacturing materials for production fall into? (NCCTE.9_12.TI.7972.D403.01) 26. Manufacturers look to their company designers to keep manufacturing cost low and avoid shop downtime by creating: (NCCTE.9_12.TI.7972.D403.01) 27. Which process of casting is much faster and requires the least amount of machining? (NCCTE.9_12.TI.7972.D403.01) 28. Which does NOT apply to the rough forming of shaping a part? (NCCTE.9_12.TI.7972.D403.01) Nonconformist, nonferrous, and non-alloy. Confirmist, ferrous, and alloys. Ferrous, nonferrous, and alloys. Fertile, ferrous, and allowing. Metal, plastic, and inorganic materials Metal, steel, and bio-materials Metal, sheet metal, and organic materials Rubber, plastic, and dead materials Sketches. 3D models. Oblique drawings. Prototypes. Sand Die Cedar Extrusion Surface Grinding Casting Forging Welding NOT apply to the rough forming of shaping a part?
7 Page 7 of The three main stages involved in the actual manufacturing process of a part are: (NCCTE.9_12.TI.7972.D403.01) 30. Any number of process methods may be used by industry. For this reason, the designer and the drafter must have a/an: (NCCTE.9_12.TI.7972.D403.01) 31. Which is NOT an important phase of the manufacturing process? (NCCTE.9_12.TI.7972.D403.01) Casting, welding, and shipping. Welding, packaging, and shipping. Finish forming, assembly, and inspecting. Rough forming, finishing, and assembly. Minimum of ten years work experience in manufacturing. Engineering license in the state of North Carolina. Understanding of manual drafting tools and supplies. Working knowledge of processes to lower cost and production time. Product design Selection of materials Landscape engineering Selection of manufacturing production techniques
Casting. Training Objective
Training Objective After watching the program and reviewing this printed material, the viewer will learn the essentials of the various metal casting processes used in industry today. The basic principles
FEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS. Kris Vaithinathan and Richard Lanam Engelhard Corporation
FEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS Kris Vaithinathan and Richard Lanam Engelhard Corporation Introduction There has been a significant increase in the world wide use of platinum for jewelry
Specifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners
Glossary. 3D Animation Using computer software to create and animate a three-dimensional representation of image data.
Glossary # 2D Control Drawing A line drawing showing various views of a product with details such as material, surface finish, volume, tolerances and critical dimensions. 3D Animation Using computer software
The mechanical properties of metal affected by heat treatment are:
Training Objective After watching this video and reviewing the printed material, the student/trainee will learn the basic concepts of the heat treating processes as they pertain to carbon and alloy steels.
Section 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013
Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013 Agenda Dubuc works: location and overview MMC fabrication process at Rio Tinto Alcan Boralcan product caracteristics
Allison Rae Paramount Industries Rhode Island School of Design ID 87. Prototyping Overview
Allison Rae Paramount Industries Rhode Island School of Design ID 87 Prototyping Overview Prototyping for Mechanical Parts Paramount Industries Started as prototyping vendor, then added: Industrial Design
Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes,
Ningbo Yinzhou Keao Prototyping & Mould Factory Services include : CNC machining prototypes, STEREOLITHOGRAPHY (SLA) Selective Laser Sintering (SLS) RTV MOLDING AND CAST URETHANE PROTOTYPES Tel : +86 574
1. Injection Molding (Thermoplastics)
1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high
THE CAPABILITIES OF ZINC DIE CASTING
THE CAPABILITIES OF ZINC DIE CASTING Presented by: Ryan Winter (Manager Customer Engineering Services) Eastern Alloys, Inc. Eastern Alloys, Inc. Introduction to ZINC Introduction to Zinc Zinc is the 4th
Welding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)
Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.
Rapid Prototyping. Training Objective
Training Objective After watching the program and reviewing this printed material, the viewer will understand the principles and practical applications of Rapid Prototyping. Basic concepts are explained
PROCESSING OF VARIOUS MATERIALS
4 PROCESSING OF VARIOUS MATERIALS CHAPTER CONTENTS 4.1 Shaping Processes for Polymers Polymers Manufacturing Processes for Polymers 4.2 Rubber Processing Technology Processing of rubber into finished good
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
ARMSTRONG MOLD GRAPHITE DIE CASTING DIVISION
ARMSTRONG MOLD CORPORATION GRAPHITE DIE CASTING DIVISION Getting Started The Evolution of GDC The GDC technology was developed as a hybrid of traditional permanent mold, graphite mold and the die casting
ALUMINUM CASTING PROCESS COMPARISON CHARTS. Copyright 2002 Austin Group, LLC. All rights reserved.
ALUMINUM CASTING COMPARISON CHARTS A Qualitative Comparison of Several Competing Processes for the Production of Aluminum Castings The following charts are intended to provide a relative guide to compare
Introduction to Manufacturing Process
Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per
HEAT TREATMENT OF STEEL
HEAT TREATMENT OF STEEL Heat Treatment of Steel Most heat treating operations begin with heating the alloy into the austenitic phase field to dissolve the carbide in the iron. Steel heat treating practice
PROPERTIES OF MATERIALS
1 PROPERTIES OF MATERIALS 1.1 PROPERTIES OF MATERIALS Different materials possess different properties in varying degree and therefore behave in different ways under given conditions. These properties
Plastic Injection Molding
Training Objective After watching this video and reviewing the printed material, the student/trainee will understand the principles and physical operations of the plastic injection molding process. An
DIE CASTING. This process if for high volume, high detail, and value added economically priced cast parts. HOW IT WORKS
DIE CASTING PROCESS This process if for high volume, high detail, and value added economically priced cast parts. HOW IT WORKS A metal tool is built and attached to a furnace of molten metal Then molten
INJECTION BLOW MOLDING WITH FDM
INJECTION BLOW MOLDING WITH FDM 3D PRODUCTION SYSTEMS Time Required Cost Skill Level By Susan Sciortino, Stratasys Inc. OVERVIEW Blow molding is a manufacturing process in which air pressure inflates heated
Additive Manufacturing: Processes and Standard Terminology
Additive Manufacturing: Processes and Standard Terminology Gary Coykendall Copyright Edmonds Community College 2012; Permission granted for use and reproduction for educational purposes only. Abstract
How To Run A Test Lab In Rourkela
TESTING LABORATORY ROURKELA 1. Background: Keeping in view of the growing demand of quality of the products of the industries, Govt. has established Testing Laboratory, Rourkela, under the Directorate
RAPID PRODUCT DEVELOPMENT
Rapid Product Development and Rapid Prototyping service American Engineering Group (AEG) offer rapid product development service, a rapid and more costeffective solution for manufacturing. Bringing new
Huffman Welding & Machine, Inc.
6224 Avenue O Fort Madison, IA 52627 Phone: 319-372-7232 Fax: (319) 372-3469 www.huffmanwelding.com - Tool & Die, Fabrication, Sheet Metal, Electrical - - Millwright - - Industrial Maintenance - - Automated
BENEFITS OF 3D PRINTING VACUUM FORM MOLDS
WHITE PAPER BENEFITS OF 3D PRINTING VACUUM FORM MOLDS AUTHORS COLE HARTMAN (MECHANICAL ENGINEER) & VERONICA DE LA ROSA (INDUSTRIAL DESIGNER) FATHOM is driven by advanced technologies. We leverage our expertise
Welding. Module 19.2.1
Welding Module 19.2.1 Hard Soldering Hard soldering is a general term for silver soldering and brazing. These are very similar thermal joining processes to soft soldering in as much that the parent metal
Dissimilar Metal Corrosion
PDHonline Course S118 (1 PDH) Dissimilar Metal Corrosion Instructor: D. Matthew Stuart, P.E., S.E., F.ASCE, F.SEI, SECB, MgtEng 2013 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658
Creativity with NX Mold Wizard
Creativity with NX Mold Wizard Jim Davis SIEMENS PLM Software Technical Sales Solution Consultant james.c.davis@siemens.com Knowledge Based Solutions Strength Wizard Mold Wizard Progressive Die Wizard
Fundamentals of Design for Plastic Injection Molding. Kelly Bramble
Fundamentals of Design for Plastic Injection Molding Kelly Bramble 1 Fundamentals of Design for Plastic Injection Molding Copyright, Engineers Edge, LLC www.engineersedge.com All rights reserved. No part
Plastic Injection Molds
Training Objective After watching the program and reviewing this printed material, the viewer will become familiar with the variety, design, and productive use of plastic injection molds. Mold components
Chapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
ME349 Engineering Design Projects
ME349 Engineering Design Projects Introduction to Materials Selection The Material Selection Problem Design of an engineering component involves three interrelated problems: (i) selecting a material, (ii)
Copper Alloys for Injection, Thermoform and Blow Molds
Copper Alloys for Injection, Thermoform and Blow Molds by Robert Kusner Manager of Technical Services June 2015 Today s Agenda History of copper mold alloys Why use copper? Which copper alloy should I
Tool Design and Concurrent Engineering using Rapid Tooling Construction Methods
Section Number 3563 Tool Design and Concurrent Engineering using Rapid Tooling Construction Methods Nicole Hoekstra Engineering Technology Department Western Washington University Abstract Prior to rapid
Determining the Right Molding Process for Part Design
Determining the Right Molding Process for Part Design How RIM Molding Advantages Compare with Traditional Production Technologies Page 2 Introduction This White Paper details the part production processes
High speed machining and conventional die and mould machining
High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions
AUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
Die casting Figure M2.3.1
Die casting Die casting is a moulding process in which the molten metal is injected under high pressure and velocity into a split mould die. It is also called pressure die casting. The split mould used
Examination Regulations for the Bachelor Degree Program Mechanical Engineering at RWTH Aachen University
Examination Regulations for the Bachelor Degree Program Mechanical Engineering at RWTH Aachen University Attachment 3 Guidelines for the practical training 1 Goal of internship For a sufficient understanding
Magnetic Deburring & Polishing Machine
Magnetic Deburring & Polishing Machine Operation Manual Models: EHD-750CL, 766, 735, 728, 716, 715 1 Index 1. Before Starting to Use the spinner 2. Functions 3. Features 4. Applications 5. Principle of
1) Cut-in Place Thermoforming Process
Standard Thermoforming Equipment Overview There are three standard configurations for thermoforming equipment: 1. Heat and Cut-in-Place Forming 2. In-Line Forming with Steel Rule or Forged Steel Trim wand
Many Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
Aluminum Extrusion Guide
Aluminum Extrusion Guide There are two extrusion processes, direct and indirect. With direct, the ingot moves relative to the container wall; with indirect, the die moves. Under pressure, the ingot or
Cutting Tool Materials
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various
CATHODIC PROTECTION SYSTEM DESIGN
CATHODIC PROTECTION SYSTEM DESIGN Presented By DENIS L ROSSI P.E. CORROSION ENGINEER New England C P Inc. Corrosion Fundamentals What is corrosion? It is defined as the degradation or deterioration of
PROPERTIES, IDENTIFICATION, AND HEAT TREATMENT OF METALS GENERAL
Chapter 2 PROPERTIES, IDENTIFICATION, AND HEAT TREATMENT OF METALS GENERAL PURPOSE This chapter contains basic information pertaining to properties and identification of metal and heat-treating procedures
SEM-COM SEALING GLASSES. SEM-COM Company, Inc. 1040 N. Westwood Ave. Toledo, Ohio 43607
SEM-COM SEALING GLASSES SEM-COM Company, Inc. 1040 N. Westwood Ave. Toledo, Ohio 43607 Phone : (419) 537-8813 Fax: (419) 537-7054 e-mail: sem-com@sem-com.com www.sem-com.com SEM-COM SEALANTS SEM-COM has
Introducing Fundamental Manufacturing Processes and Manufacturing Organizational and Production Systems by Way of Laboratory Activities
Session 2263 Introducing Fundamental Manufacturing Processes and Manufacturing Organizational and Production Systems by Way of Laboratory Activities Harry Hess, Norman Asper and Joseph Flynn Trenton State
Engineering Graduate Training Scheme "A" Manufacturing & Industrial Engineering. Model Training Guide
Engineering Graduate Training Scheme "A" Manufacturing & Industrial Engineering Model Training Guide 1 Model Training Guide (MTG) The Model Training Guide is, as the name suggests, a guide to Companies
Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives. Dr. Christopher Rush Joe Falque Karen McRitchie
Real Time Cost Impact Assessment of Composite and Metallic Design Alternatives Dr. Christopher Rush Joe Falque Karen McRitchie Overview Introduction Composite Structures New Challenges Background and Related
Chapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS
Chapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS 5.1 3D SYSTEMS SELECTIVE LASER SINTERING (SLS) 5.1.1 Company 3D Systems Corporation was founded by Charles W. Hull and Raymond S. Freed in 1986. The founding
WIRE, TERMINAL AND CONNECTOR REPAIR CONDUCTORS
CONDUCTORS Conductors are needed to complete the path for electrical current to flow from the power source to the working devices and back to the power source. Special wiring is needed for battery cables
University of Portland School of Engineering LABORATORY OUTLINE: TENSILE TESTING OF STEEL & ALUMINUM ALLOYS (ASTM E8)
TENSILE TESTING OF STEEL & ALUMINUM ALLOYS (ASTM E8) To carry out a standard tensile test on specimens of a hot rolled steel (AISI 1045), Type 2024- T351 aluminum, polymers (UHMW-PE, acrylic) and, from
MIT 2.810 Manufacturing Processes and Systems. Homework 6 Solutions. Casting. October 15, 2015. Figure 1: Casting defects
MIT 2.810 Manufacturing Processes and Systems Casting October 15, 2015 Problem 1. Casting defects. (a) Figure 1 shows various defects and discontinuities in cast products. Review each one and offer solutions
A Guide to Thermoform Processing of Polypropylene. Introduction
A Guide to Thermoform Processing of Polypropylene Introduction Thermoforming is the process of heating plastic sheet to a pliable state and forming it into shape. Thermoforming offers processing advantages
TechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
INDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
MSS Monobloc holders for parting and grooving
MSS Monobloc holders for parting and grooving Easy, profitable and convincing 2 Monobloc tool holder, system GX, for inserts with two cutting edges, size GX24. Inexpensive solution for radial grooving,
NetShape - MIM. Metal Injection Molding Design Guide. NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807
Metal Injection Molding Design Guide NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807 Solon, OH 44139 solutions@netshapetech.com 1 Frequently Asked Questions Page What
MATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified
MATERIALIZING VISIONS Bohler-Uddeholm P20 Modified General Bohler-Uddeholm P20 Modified is a Cr-Mo-alloyed steel which is supplied in the hardened and tempered condition. P20 Modified offers the following
FRIULFORGIA Srl COMPANY PRESENTATION. We shape your world
FRIULFORGIA Srl We shape your world COMPANY PRESENTATION E-mail: info@friulforgia.it - Web: www.friulforgia.it 1 FRIULFORGIA Foundation and facts Friulforgiaisa privatelyheldcompany, whichstarteditsactivitiesin
Free Examples of plant layout drawing
Free layout examples; a wide variety of industrial layouts, within different facility types. Principles of plant layout and design will apply widely. Free Examples of plant layout drawing Principles of
How to Effectively Move from 3D Printing to Injection Molding. Tony Holtz Technical Specialist, Proto Labs
How to Effectively Move from 3D Printing to Injection Molding Tony Holtz Technical Specialist, Proto Labs Overview 3D Printing CNC Machining Injection Molding Design Considerations for Injection Molding
Treatment of a surface or structure to resist the passage of water in the absence of hydrostatic pressure. presence of hydrostatic pressure.
Recommend Approval: Team Leader Date Division Chief Date Approved: Director Date Maryland Department of Transportation State Highway Administration Office of Materials Technology MARYLAND STANDARD METHOD
Bevel gears Keramik. Kegelräder. Ceramic Schmieden Forging Stanzen Stamping Kokillenguss Permanent Mould Casting Druckguss Pressure Die Casting
Kegelrär Bevel gears Keramik Ceramic Schmien Forging Stanzen Stamping Kokillenguss Permanent Mould Casting Druckguss Pressure Die Casting Pressguss Squeeze Casting Sandguss Sand Casting Feinguss Investment
DSM http://www.dsmmfg.com 1 (800) 886-6376
DESIGN GUIDE FOR BENT SHEET METAL This guide discusses how the bends are made, what thicknesses of sheet metal are commonly used, recommended bend radius to use when modeling the part, some practical limits
2.3. Continuous Hot-Dip Galvanizing versus General (Batch) Galvanizing Rev 1.0 Jan 2011. GalvInfoNote. Introduction. Continuous Galvanizing
2. Coating Processes and Surface Treatments GalvInfoNote 2.3 Introduction Continuous Hot-Dip Galvanizing versus General (Batch) Galvanizing There are two different processes for applying a zinc coating
GRCC Manufacturing Technology
Grand Rapids Community College GRCC Manufacturing Technology Plastics Manufacturing Quality Science Tooling and Manufacturing Welding 1 www.grcc.edu G r a n d R a p i d s C o m m u n i t y C o l l e g
PAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
ROLLS LIFELINE OF ROLLING MILLS. Gireesh Madan Manager (Monitoring & Evaluation) Project Management Cell New Delhi
ROLLS LIFELINE OF ROLLING MILLS Gireesh Madan Manager (Monitoring & Evaluation) Project Management Cell New Delhi a h W s i t o m m o c e r u t c i p e h t l l a n i n? s m o r f d e c u d o r p e s r
Advanced Materials and Diversified Manufacturing
Advanced Materials and Diversified Manufacturing Analysis for, Ohio Advanced Materials and Diversified Manufacturing Cluster 3 Automobile manufacturing Copper wire, except mechanical, drawing Iron and
Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing... 3 Stainless
Rapid Prototyping Technologies. May, 2016
Rapid Prototyping Technologies May, 2016 WE HAVE ALL THE NECESSARY TOOLS TO ENSURE THE FINAL SUCCESS OF YOUR PROTOTYPE. Andaltec can help you in all the steps, from the design to fully finished prototype
Steel production. Furnace linings made from carbon and graphite are applied for the production of primary iron.
Steel production Furnace linings made from carbon and graphite are applied for the production of primary iron. Graphite electrodes and nipples (connecting pins) are applied for the production of steel.
Soldering, Brazing, and Welding
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. 46 Section Introduction to Plumbing Soldering, Brazing, and Welding Objectives This chapter
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
Wire Drawing Soap Lubrication: Principles And Factors Affecting Selection
Wire Drawing Soap Lubrication: Principles And Factors Affecting Selection 1 Wire Products 2 Rod: The Starting Material 3 The tool: Wire Drawing machines Dry Draw Bench Courtesy of Lamnea Bruk, Ljusfallshammar,
Aluminium as Construction Material in Ammonia Refrigeration Cycles
Aluminium as Construction Material in Ammonia Refrigeration Cycles Experiences With Aluminium Compared to other metals, aluminium has only a brief history as an engineering material. While, about 150 years
EML 2322L MAE Design and Manufacturing Laboratory. Welding
EML 2322L MAE Design and Manufacturing Laboratory Welding Intro to Welding A weld is made when separate pieces of material to be joined combine and form one piece when heated to a temperature high enough
Thermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
Right Angle Grinder USA MADE FLAP DISCS
USA MADE FLAP DISC Right Angle Grinder CGW Offers the Most Extensive Line of Flap Discs in the Marketplace CGW flap discs blend and finish in one operation which replaces the traditional twostep grinding
CENTRIFUGAL CASTING. Email: amitjoshi@iitb.ac.in amitjoshi1000@yahoo.ca
CENTRIFUGAL CASTING Amit M Joshi (B.Engg. Mechanical, A.M.I.Prod.E, A.I.E) Dept. of Metallurgical Engg. & Material Science, Indian Institute of Technology Bombay, India. Email: amitjoshi@iitb.ac.in amitjoshi1000@yahoo.ca
What is a mold? Casting. Die casting. Injection Molding Machine. Injection Molding. 2.008 Design & Manufacturing II. Spring 2004
2.008 Design & Manufacturing II What is a mold? From Webster: a cavity in which a substance is shaped: as (1) : a matrix for casting metal (2) : a form in which food is given a decorative shape Spring
the runnerless types of molds are explained post molding operations are described the basic methods of applied decoration methods are examined
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the various plastic finishing processes used in industry and their
Injection molding overview
Injection molding overview This injection molding overview is designed to help our customers understand the process of injection molding and mold-making. Please read it fully as it helps to define what
Pipe Protection Tape System
Pipe Protection Tape System PASCO All Weather Pipe Protection Tape is a pure physical barrier that is moisture proof, inert and non-conducting. Whether the need is to protect overhead piping in industrial
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING MERSEN A world leader committed to Renewable Energies A world leading supplier of electrical protection, sealing,
SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS
Page 1 of 5 SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS Guarda Security Window Screens in this specification are appropriate for use in windows, storefronts, curtain walls, vents, and any other applications
How To Write A Recipe Card
Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN 2157-2. 51 Macrostructure
Copyright 1998 Society of Manufacturing Engineers FUNDAMENTAL MANUFACTURING PROCESSES PLASTIC BLOW MOLDING NARRATION (VO): NARRATION (VO):
FUNDAMENTAL MANUFACTURING PROCESSES PLASTIC BLOW MOLDING SCENE 1. CG: EXTRUSION BLOW MOLDING white text centered on black SCENE 2. tape 401, 07:25:29-07:25:41 zoom in, extrusion process tape 401, 07:08:50-07:09:06
An Upper Casing for an Automobile Steering Column
TALAT Lecture 2102.02 An Upper Casing for an Automobile Steering Column 15 pages, 16 figures Basic Level prepared by Steinar Skog and Kolstein Asbøll, Raufoss A/S, Raufoss and by Skanminium, Oslo Objectives:
North American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
North American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
Aluminium Rolling Mill Technology
DIE BIBLIOTHEK DER TECHNIK 233 Aluminium Rolling Mill Technology Future concepts in thin-strip and foil rolling VERLAG MODERNE INDUSTRIE Achenbach Buschhütten Contents Aluminium an innovative material