JUAL PIPA CARBON STEEL
|
|
- Baldric Brooks
- 7 years ago
- Views:
Transcription
1 JUAL PIPA CARBON STEEL Menjual: PIPA CARBON STEEL ASTM A106 Gr.B Seamless Pipe for High Temperature Service ASTM A53 Gr.B Seamless & Welded Steel Pipe API-5L Gr.B Seamless & Welded Line Pipe PIPA STAINLESS STEEL ASTM A312 - TP316/ L Seamless & Welded Pipe ASTM A312 - TP304/ L Seamless & Welded Pipe PIPA HITAM & GALVANIZED ASTM A53 Gr.A Steel Pipe ERW ASTM A120 Gr. A Welded Pipe AWWA C 200 Welded Steel Water Pipe Sch Medium, 40 PIPA SPIRAL ASTM A252 Gr.2 Spiral Welded Steel Pipe Piles AWWA C 200 Spiral Welded Steel Water Pipe Thikness Pipa: 6mm 20mm PIPA ALLOY STEEL ASTM A333 Gr. 1, 3, 6 Seamless for Low Temperature TUBING Stainless Steel 316L / 304L 0.035, 0.049, 0.065, 0.083, 0.95 ELBOW ASTM A234 Gr.WPB BW Seamless Long Radius & Short Radius A403 WP 304/ L BW LR/ SR Seamless & Welded 45º, 90º A403 WP 316/ L BW LR/ SR Seamless & Welded 45º, 90º A420 WPL 6 BW LR/ SR Seamless 45º, 90º EQUAL TEE / REDUCER TEE ASTM A234 Gr.WPB BW Seamless A403 WP 304/ L BW Seamless & Welded A403 WP 316/ L BW Seamless & Welded A420 WPL 6 BW Seamless
2 REDUCER CONCENTRIC / ECCENTRIC ASTM A234 Gr.WPB BW Seamless A403 WP 304/ L BW Seamless & Welded A403 WP 316/ L BW Seamless & Welded A420 WPL 6 BW Seamless CAP ASTM A234 Gr.WPB BW Seamless A403 WP 304/ L BW Seamless A403 WP 316/ L BW Seamless A420 WPL 6 BW Seamless SLIP ON FLANGE BLIND FLANGE WELDING NECK FLANGE Sch 40, 80, 160, XS SOCKED WELD FLANGE
3 FLANGE RING TO JOINT ( RTJ) THREADED FLANGE FORGED FITTINGS Jenis: * Elbow 90º, 45º, * Tee, * Cap, * Coupling, * Half Coupling, * Plug, * Bushing, Pipe Nipple, * Hex Nipple, * Swage Nipple, * Socket Union, * Threaded Union, * Weldolet, * Sockolet, * Threadolet dll A182 TP 304/ L Stainless Steel A182 TP 316/ L Stainless Steel Low Carbon A350 LF 2 Carbon Steel Low Temperature 3000Lb, 6000Lb ANSI B16.11 INSTRUMEN TUBING Jenis: * Male Connector, * Female Connector, * Cap, * Male Adapter, * Female Adapter, * Plug, * Male Bulkhead, * Female Bulhkead, * Union Tubing, Union Tee dll Stailess Steel 316 / L 6000Psi Brand: Swagelok, Whitey, Parker, Gyrolok dll BALL VALVE Trunion & Floating A216 WCB Carbon Steel A105 Forged Steel A126 Cast Iron A395 Ductile Iron A351-CF8 Stainless Steel 304 A351-CF3 Stainless Steel 304L A351-CF8M Stainless Steel 316 A351-CF3M Stainless Steel 316L A217 Alloy Steel General Design: API 600, API 602, API 6D
4 ANSI 150#, 300#, 600#, 900#, 1500# GATE VALVE A216 WCB Carbon Steel A105 Forged Steel A126 Cast Iron A395 Ductile Iron A351-CF8 Stainless Steel 304 A351-CF3 Stainless Steel 304L A351-CF8M Stainless Steel 316 A351-CF3M Stainless Steel 316L A217 Alloy Steel Manufacturing Standards: General Design API 600, API 602, API 6D Pressure Rating ASME/ ANSI B16.34 Face to Face ASME / ANSI B16.10 Flange Dimantion ASME/ ANSI B16.5 Butt-Weld End ASME/ ANSI B16.25 Pressure Class: ANSI 150# Working Pressure 285Psi, size 2-24 ANSI 300# Working Pressure 740Psi, size 2-24 ANSI 600# Working Pressure 1480Psi, size 2-16 ANSI 900# Working Pressure 2220Psi, size 2-12 GLOBE VALVE Manufacturing Standards: General Design API 600, API 602 Pressure Rating ASME/ ANSI B16.34 Face to Face ASME / ANSI B16.10 Flange Dimantion ASME/ ANSI B16.5 Butt-Weld End ASME/ ANSI B16.25 Pressure Class: ANSI 150# Working Pressure 285Psi, size 2-16 ANSI 300# Working Pressure 740Psi, size 2-16 ANSI 600# Working Pressure 1480Psi, size 2-12 ANSI 900# Working Pressure 2220Psi, size 2-8 CHECK VALVE Manufacturing Standards: General Design API 600, API 594, API 602 Pressure Rating ASME/ ANSI B16.14 Face to Face ASME / ANSI B16.10 Flange Dimantion ASME/ ANSI B16.5 Butt-Weld End ASME/ ANSI B16.25 Pressure Class: ANSI 150# Working Pressure 285Psi, size 2-24 ANSI 300# Working Pressure 740Psi, size 2-20 ANSI 600# Working Pressure 1480Psi, size 2-16 ANSI 900# Working Pressure 2220Psi, size 2-10 Y-STRAINER ASTM A-126B
5 Cover A-126B Screen SS 304 Cover Bolt Carbon Steel Pressure Class ANSI 150#, 300#, 600# Type: Flanged Ends Butt Welding Ends BUTTERFLY VALVE ASTM A216 WCB ASTM A105 ASTM A350-CF8 Disc: SS 316, Rubber Line Disc Maks Work Pressure: ANSI 150lb, 300lb Type: Handle & Gear Aplikasi: Chemical, Sea Water, Food, Oil dll FOOT VALVE Spec: Bodi Material: Cast Iron Seat Material: Bronze / Brass Screen Material: Stainless Steel Flange Standar: ANSI & JIS Brand: Mizu dll BOLT & NUTS Stud Bolt & Nut High Tension Anchor Bolt All Type Bolt & Nut Hex Head Bolt & Nut Flange Bolt & Nut Mechine Bolt dll Material Spec: ASTM A193 Gr.B7 & ASTM A194 Gr.2H; ASTM A193 Gr.B7M & ASTM A194 Gr.2HM; ASTM A193 Gr.B8 & ASTM A194 Gr.8; ASTM A193 Gr.B8M & ASTM A193 Gr.8M, Gr. A307, Gr. 8.8, A 325 Hot. Dip Galvanized, SS 304/ 316 Heavy Semi Finished Hex Nuts, Flouro Carbon Coated Note: Kami Melayani sesuai Pesanan HOSE Rubber Hose Industrial; Flexibble Hose; Hidroulic Hose; Camlock; Expantion Joint; Quick Coupling; Fire Hose dll Design & Manufacture : Italy, USA, Japan, Indonesia, Taiwan, China dll Note: Kami Melayani Sesuai Pesanan STEEL GRATING Steel Grating Types: Galvanized Steel Grating, Press Locked Steel Bar Grating Bar Type Steel Grating Plain Type Steel Grating Forge Welded Steel Grating
6 Steel Grating Fence Expanded Steel Grating Safety Step Bar Grating Note: Kami Melayani Sesuai Pesanan STEEL CONSTRUCTION Jenis: Steel Plate, Plate Kapal, Plate Stainless Steel, Plate Strip-Bar, Plate Bordes, UNP, CNP, INP, Siku, Besi Beton ( Polos & Ulir), Besi Asental, Pipa Kotak, H-Beam, IWF, Plate Baja Lapis Seng, Plate & Pipa Boiler, Pressure Vessel, Boiler Plate dll ASTM A515 Gr.70 ( High Temperature), ASTM A516 Gr.70 ( Low Temperature), ASTM A283 Gr.C, ASTM A285 Gr.C, ASTM A36, SS 304L, SS 316L, SS 400, S 45C Harga: Jumlah: Kemas & Pengiriman: NEGO SESUAI PESANAN JUAL
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
More informationHK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company.
HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company. Based on superb and fair business relationships to long-standing
More informationA.A.NAJJAR TRADING EST.
A.A.NAJJAR TRADING EST. Source of ferrous and non ferrous metals Page 1 ABOUT US We, serve to the requirements of various Industries such as Refineries, Oil & Gas Plants, Fertilizers, Power, Pharmaceuticals,
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More information5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
More informationRING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationPLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationCODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts.
CODES AND STANDARDS T. N. GOPINATH For scientific design of Piping Systems, selection of proper material of construction and to detail out the material specifications, knowledge of Codes and Standards
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationSpira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationBased on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013
SimplexGrinnell TXMAS ecommerce Ferguson Fire and Fabrication Sprinkler Price List Based on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013 Product ID Description TXMAS
More informationCHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
More informationEconosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationStockists of valves, actuators, tubes and fittings for instrument and mechanical applications. Company Overview
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications Company Overview Delivering promises. Since our foundation in 1980, PCE has grown to become an international
More informationSECTION 15010 GENERAL REQUIREMENTS, MECHANICAL. 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1.
SECTION 15010 June 16, 2005 GENERAL REQUIREMENTS, MECHANICAL A. GENERAL 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1. 2. All piping shall be in accordance
More informationABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
More informationC. CR: Chlorosulfonated polyethylene synthetic rubber. E. EPDM: Ethylene-propylene-diene terpolymer rubber.
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
More informationValves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
More informationPlumbing Specialties
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456 WWW.SMITHCOOPER.COM Plumbing Specialties QUALITY Most manufacturing facilities are certified to ISO standards ISO Quality Plus
More informationVictaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500)
Victaulic Standard Grooved and Advanced Grooved (AGS) Piping System for IPS Steel 2 (DN 50) through 60 (DN1500) 1.01 General: A. Section Includes: 1. General 2. Materials: a. Pipe b. Victaulic Couplings
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationMechanical Products. Mechanical Products M06-1
Products Products M06-1 3 TABLE OF CONTENTS 1. GENERAL DATA... 5 10 The Engineered Coupling...6 Features & Benefits...7 ISO 9001:2000 Certificate of Registration...8 Approvals...9 Manufacturing Process...10
More informationWD600 STEAM TRAPS. Thermodynamic Steam Trap
WD600 Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company WD600, WD600L Sizes 3/8, 1/2, 3/4, 1 NPT Material Stainless
More informationwww.klmtechgroup.com TABLE OF CONTENTS
Page : 1 of 216 TABLE OF CONTENTS 1 GENERAL 2 1.1 Scope 2 1.2 Code and s 2 1.3 Pressure-Temperature Design 6 1.4 Pipe Wall Thickness Allowance 7 1.5 Ends 8 1.6 Units 8 1.7 Language 9 2 MATERIAL 9 2.1 General
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 10 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
More informationDESIGN NOTES WELDING NOTES WELDERS & WELDING PROCEDURES ARE QUALIFIED TO API-1104 RADIOGRAPHY 0.72 DESIGN FACTOR 100% BUTT WELDS PER API-1104 WITH
GENERAL NOTES:. ALL AUILIARY TUBING DESIGN MUST FOLLOW MARATHON STANDARD TNLDGN00. ALL SWAGELOK TUBE FITTINGS MUST BE ASSEMBLED USING POCKET INSTALLATION MANUAL. AUILIARY TUBING ASSEMBLIES SHALL BE SHOP
More informationVogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationHYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
More informationHome. News. Products. Contact Us. Treated Swagelok Fittings--for better inertness!
New GC Accessories New GC Accessories New GC Accessories Fittings: Swagelok : Home Brass & Stainless Steel News Also available: Products Silco Fittings : Siltek & Sulfinert Also available: Info & Support
More informationProduct Catalogue Australian Plumbing Fittings
Capillary Sizes ELBOWS - 90 Degree J08123 15mm x 15mm 90Deg LE Cu SR ELB F+F (No. 12) J08131 18mm x 18mm 90Deg LE Cu ELB F+F (No. 12) J08145 20mm x 20mm 90Deg LE Cu SR ELB F+F (No. 12) J08147 20mm x 15mm
More informationSECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS
SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work
More informationOrifice Plates. Specifications
Orifice Plates Orifice plates are most commonly used primary elements for flow measurement in pipelines based on the principle of measurement of differential pressure created when an obstruction is placed
More informationThe Augustus Group Products Projects and Engineering Consulting. ASME BOILER AND PRESSURE VESSEL CODE Mike Looram
The Augustus Group Products Projects and Engineering Consulting ASME BOILER AND PRESSURE VESSEL CODE Mike Looram ASME B&PV CODE SECTION VIII DIV. 1 Bolted Flanges With Ring Type Gaskets Stress Calculations
More informationHose & Coupling Solutions Dixon Europe
Hose & Coupling Solutions Dixon Europe The Story so far......the Dixon Group is a world leading supplier of hose and coupling products. It prides itself on its reputation for quality and innovation. It
More informationCALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
More informationAmerican- Darling 5¼" B-84-B-5.
-5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which
More informationCopper and Copper Alloy Tube, Pipe and Fittings
Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationTechnical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
More informationHAMMER UNIONS HAMMER UNIONS. Figure 100 TxT Figure 200 & 206 TxT Figure 602 TxT. Figure 1002 TxT Figure 1002 BW Figure 1502 TxT Figure 1502 BW
HAMMER UNIONS Figure 00 Figure 00 & 06 Figure 60 Figure 00 Figure 60 Figure 00 Figure 00 Figure 0 Figure 0 Specification: HAMMER UNIONS The material for the Hammer Union conforms to the requirements of
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More informationLOT DETAILS FOR 672BZ-1016
DESCRIPCION LARGA FABRICANTE CENTRO SECTOR LICENCIA LINEA CÓDIGO VALVE~TYPE:EMERGENCY SHUTDOWN~VALVE SIZE:9IN~PRESSURE RATING:10000LB~MATERIAL SPECIFICATION:ASTM A487~GRADE:1CLC VALVE BALL VALVE SIZE:16
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationNickel Alloys, Stainless Steel and Other Corrosion Resistant Alloys ALASKAN COPPER & BRASS COMPANY
Bosses and Welding Outlets Branch Outlets in Copper-Nickel, Nickel Alloys, Stainless Steel and Other Corrosion Resistant Alloys ALASKAN COPPER & BRASS COMPANY T he various Alaskan Copper and Brass Company
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationStainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationTYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
More informationPLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
More informationPlumbing Lesson Five: Pipe Fittings and Parts. Student Handouts
Lesson Five: Pipe Fittings and Parts Student Handouts Building Basics was paid for under an EL Civics grant from the U. S. Department of Education administered by the Virginia Department of Education.
More informationGD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
More informationAPCO SLOW CLOSING AIR/VACUUM VALVES
BULLETIN 1 JULY 01 APCO SLOW CLOSING AIR/VACUUM VALVES Series 1900 APCO Slow Closing Air/Vacuum s Maximum Air Flow Velocity in Good Pipeline Design The Air/Vacuum operates in the normal fashion allowing
More informationSelf-contained valve functions as integral check valve, flow sensing element and bypass control valve.
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve. Features Eliminates high cost of installation and maintenance of complex conventional flow control
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationKFC Group, S.A. "Global Business Organizer"
KFC Group, S.A. KFC Group, S.A. "Global Business Organizer" KFC Group S.A. is a trading company that does business primarily in the areas of steel, shipbuilding, oil & gas and technology. We have the ability
More informationSpecification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
More informationSTORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
More informationMADE IN THE USA BALL VA LV ES
MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7
More informationDOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
More informationSection 3510: Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011
STANDARDS AND CONSTRUCTION MANUAL : Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011 PART 1 - GENERAL 1.01 SCOPE OF WORK A. These specifications cover the pipes, fittings, and appurtenances
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationWafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
More informationBALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
More informationAIR RELEASE, CLEANOUT, AND SEWER MANHOLES
AIR RELEASE, CLEANOUT, AND SEWER MANHOLES **From Hartford IM BLDG(10) DESCRIPTION. This work shall consist of the construction of air release, cleanout, and sanitary sewer manholes; and the furnishing
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationDuctile Iron Pipe Couplings
J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your
More informationSIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationSECTION 15105 DUCTILE IRON PIPE AND FITTINGS
SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections
More informationBWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
More informationSECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 16 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia ORIFICE FLANGES TABLE OF CONTENT SCOPE
More informationVentilstandarder ett urval av standarder
EN 19:2002 EN 558:2008+A1:2011 EN 593:2009+A1:2011 EN 736-1:1995 EN 736-2:1997 EN 736-3:2008 EN 1074-1:2000 EN 1074-2:2000, A1:2004 EN 1074-3:2000 EN 1074-4:2000 EN 1075-5:2001 EN 1074-6:2008 EN 1171:2002
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationDV-5 Deluge Valve with Remote-Resetting, Pressure-Reducing Trim 4 Inch and 6 Inch (DN100 and DN150) General Description.
Worldwide Contacts www.tyco-fire.com DV-5 Deluge Valve with Trim 4 Inch and 6 Inch (DN and DN5) General Description The TYCO DV-5 Deluge Valve with Trim is a diaphragm-style valve that depends upon water
More informationCODES AND STANDARDS FOR DESIGN, SUPPLY AND CONSTRUCTION OF NATURAL GAS PIPELINE. Specification for Line Pipe. Specification for Pipeline Valves
CODES AND STANDARDS FOR DESIGN, SUPPLY AND CONSTRUCTION OF NATURAL GAS PIPELINE Description Standard Title Mainline Valve API 5L API 6D ASME B31.8 Specification for Line Pipe Specification for Pipeline
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationEMP Part # Categor Description
EMP Part # Categor y Description Qty Available as of 01/03/13 Cost/C 001014 SHC 1/4-20x1/2 J429 GR 5 Hex Hd Cap Screw Zinc Yellow 3,300 $1.41 001079 SHC 1/4-20x1 1/4 J429 GR 8 Hex Hd Cap Screw Black Oxide
More information