A.A.NAJJAR TRADING EST.

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "A.A.NAJJAR TRADING EST."

Transcription

1 A.A.NAJJAR TRADING EST. Source of ferrous and non ferrous metals Page 1

2 ABOUT US We, serve to the requirements of various Industries such as Refineries, Oil & Gas Plants, Fertilizers, Power, Pharmaceuticals, Cement Companies, Engineering Industries and Construction companies etc. we can meet the requirements of our clients in both quantity/ quality materials as well as special items. We have excellent relations with both local as well as overseas companies. Najjar Est. is having three divisions, which are very much actively involved in Saudi market from last Ten Years. Petroleum Piping Division. Electrical & Mechanical Division Civil Work Contracting Division. Najjar Est. s Petroleum piping division, is a leading player in the supply of Copper Alloy, Nickel Alloy, Duplex/Supper Duplex, Inconel, Monel, Hastelloy, carbon Steel, stainless steel,pipes & Tubes, Fittings,Rods, Sheets,Plates, valves, Flanges, bolt & nuts, gaskets in various sizes and grades as well in Aluminum, Ferrous and Non Ferrous metals. Najjar Est. s E&M division, apart from other activities, is a leading dealer of electronic and electro mechanical equipment, machines, and system related to HVAC, Power, Communications, Surge control, lighting, Tracking System and IT services Najjar Est. s Civil Work division, is mainly involved in civil work contracting, we take full or partial jobs of electrometrical and Civil work like chiller package unit installation, HVAC ducting, plumbing, firefighting, interior / exterior decoration (GRC,GRG & Gypsum work), Page 2

3 ABOUT US Najjar Est. being a well established trading house, is brilliantly connected with a network of overseas purchase offices, manufacturers, out of Kingdom stockiest and forwarders, who through consolidated shipments not only make it an efficient procurement system for emergency requirement but make it cost saving as well. Our achievements have been pasteurized by meeting our commitments of maintaining the highest standards of quality for our valued clientele of Private, Public, Government, Semi government Institutions and project. Quality Policy Quality is our primary focus, as always we have strived to search and supply quality products for all budgets and specifications. Our Quality policy is to receive and provide goods and services by maintaining quality at all times. Moving into the age of a Buyer s Market, customer satisfaction and services are areas we have well established and continue pursuing. As Najjar Est., We undertake this commitment in all our internal and external procedures that guides the efforts of our operations of our employees, suppliers and customers. We provide and receive goods and services of the highest quality at reasonable price. We, therefore ask for your cooperation in our relentless pursuit to achieve greater quality in all that we do. It makes us a better company, a better partner and a better place to work Page 3

4 Piping Division PIPES & TUBES Stainless Steel Seamless & welded pipes and tubes as per ASTM A312, A 269 Types 304,304L, 316,316L, 316Ti, Sch 10, Sch 40, Sch 80, Sch 160 etc. Copper Alloy, Nickel Alloy, Duplex/Supper Duplex, Inconel, Pipes & Tubes. Carbon Steel & galvanized pipes ASTM A53/API,5L/ASTM A106 Grade B Black Steel & Galvanized Steel ERW Pipes ASTM A120/ASTM A53 SCH 40 FITTINGS Forged Steel & Stainless steel Fittings ASTM A105N & ASTM A182 TP/304/L & TP316/L 3000 & 6000 PSI (screwed & socket & welded) Carbon Steel & Stainless Steel Butt Weld Fittings ASTM A 234 WPB & ASTM A403 TP304/L & 316/L SCH 10,40,80,&160 Cast Stainless Steel Fittings, ASTM A351 TP304 & 316,150 PSI Screwed Black & Galvanized Malleable Iron Fittings Compression Fittings, SS 304, 316 and Brass FLANGES Forged Steel & Stainless Steel Flanges ASTM A105N 7 ASTM A182 TP304/L & 316/L Class:150,300 & 600 PSI Slip On,weld neck, Blind Screwed, Socket weld & Lap joint SHEET & PLATES Stainless Steel Sheets & Plates ASTM A420,Types 304,304L,316L,430,310,310S Aluminum Sheets BS1470 Equivalent to ASTM B209 Alloys1050/1100 VALVES Forged Steel & Stainless Steel Valves ASTM A & 1500PSI & ASTM A180 TP316,316L,304 Gate,Globe, Check & Ball (Screwed & Socket weld) Cast Steel & Stainless Steel Valves ASTM A216 WCB & ASTM A351 CF8M & CF8,150,300,600 PSI Gate Iron Valves Flanged ends & Butterfly (flanged Ends) Cast Iron Valves Flanged Ends ASTM A PSI BARS Stainless Steel Round bars ASTM A276 Hot rolled,smooth tuned Stainless Steel Angel bar, Flat bar & Hex bar etc S.S POLISHED TUBING Stainless Steel decoration tube polished & hair Line Finish (Round, Squire,Rectangular section ) TP304 Page 4

5 Electrical & Mechanical Division Electrical Works In electrical work our SCECO approved team has complete setup for cable pulling, cable joint, termination and wiring in the multi stories buildings. Electronics IT Electronics & IT department covers telephone networking, computer networking, installation of patch panels, trouble shooting, maintenance of computers networks and fire alarm systems. Mechanical Works For mechanical jobs we cover following: PVC, Steel, Copper pip and networks Plumbing for sanitary, bathrooms and kitchens Pumps and pumping system HVAC R The establishment has vast experience in HVAC that covers Chiller/Package Units/Split Units Installation, Chilled water piping and complete ducting jobs. Steel Fabrication Our leading and highly diversified steel workshops are in the field of steel fabrication and erection with complete setup to facilitate our clients with all respects. We have vast experience in fabrication and erection of structural steel hangers and buildings, shelters, steel tower, Porta Cabin, pipe fitting, steel gates and hand rail etc. Structural Steel Erection In structural steel we cover office and industrial buildings; commercial buildings like hotels, warehouses; and other highway transportation facilities. Our team is well skilled to carry out erection of prefabricated structures. Page 5

6 Civil Work Contracting Division General Constructions In our general constructions work category it include maintaining roads, Industries, workplaces and physical infrastructure. Irrespective of hazardous task and conditions like height, excavation, dust, power tools and equipment or tight spaces we committed to accomplish our scope. Civil Works Our organized civil work team is capable of designing cutting and fixing the marbles, tiles etc. we have experienced team of mason, foreman, supervisor and civil Engineers who are on different projects. Interior and Exterior Decoration (G. R. C / Gypsum) Both divisions; G.R.C & False ceiling plus internal decoration (Gypsum), are well equipped with best quality tools, machineries and other equipment G.R.C spray plant etc. the establishment has qualified and experienced engineers, supervisors and highly skilled work force. Note: Separate e catalog is available upon request for more design options. Page 6

7 NOMINAL O.D DIMENSION OF WELDED AND SEAMLESS PIPE ( DIMENSION IN INCHES ) NOMINAL WALL THICKNESS ANSI JIS ANSI B ANSI B SCH. 5 SSCH. 10 S SCH. 40 S SCH. 80 S SCH. 10 SCH. 20 SCH. 30 STD SCH. 40 SCH. 60 SCH. XS SCH. 80 SCH. 100 SCH. 120 SCH. 140 SCH. 160 SCH. XXS 1/ /8 1/ /4 3/ /8 1/ /2 3/ / / /4 1 1/ / / / / / NOMINAL O.D DIMENSION OF WELDED AND SEAMLESS PIPE ( DIMENSION IN MILLIMETERS ) NOMINAL WALL THICKNESS ANSI JIS SCH.5S SCH.10S SCH.40S SCH.80S SCH.10 SCH.20 SCH.30 STD SCH.40 SCH.60 XS SCH.80 SCH.100 SCH.120 SCH.140 SCH.160 XXS 1/ /8 1/ /4 3/ /8 1/ /2 3/ / / /4 1 1/ / / / / / Jeddah Branch: Sanabil Center, 1 st Floor, Office No. 336, Baladiya Street, Al Aziziya District, Jeddah, Saudi Arabia Tel: , Fax: Web: ANSI B ANSI B A.A. NAJJAR TRADING EST. Page 7 Dammam Branch: Al Dossary Building, 3 rd Floor, Office No. 1, King Faisal Street, Al Dawasir District, Dammam, Saudi Arabia Tel: , Fax: Web: NOMINAL NOMINAL

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

+91-8071683511 Amanat Steels Pvt. Ltd http://www.amanatsteels.net/ Our company is one of the leading exporters & stockiest of Stainless Steel Pipes, Tubes, Round Bars, Hot Rolled & Cold Rolled Stainless

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

Stainless Steel Pipe & Tubing

Stainless Steel Pipe & Tubing CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456 WWW.SMITHCOOPER.COM Stainless Steel Pipe & Tubing Stainless Pipe 304/304L & 316/316L Stainless Steel Pipe Wall Thickness and

More information

+91-8048077645 Korus Alloys http://www.famoustubes.co.in/ We are one of the trusted trader and supplier of a quality range of Surgical Tube, Coil, Pipe, Flange, Fitting and Allied Product. These products

More information

SECTION 32 31 13 CHAIN LINK FENCES AND GATES

SECTION 32 31 13 CHAIN LINK FENCES AND GATES SECTION 32 31 13 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Fence framework, fabric, and accessories. 2. Excavation for post bases. 3. Concrete foundation for posts

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY CONSTRUCTION B 16.34 API 6A - API 6D BS 5351 EN 17292 SIZE FROM 1/2 TO 60 REDUCED AND FULL BORE CLASS

More information

SEAMLESS WELDED FITTINGS

SEAMLESS WELDED FITTINGS SEAMLESS WELDED FITTINGS WALL THICKNESS NPS Pipe 2 A B K D V E F G O.D. Light SCH SCH STD SCH SCH X-SIG SCH SCH SCH SCH SCH XX NPS Wall 20 0 40 60 80 00 20 40 60 Stg ASA MSS /2.840.08 --- ---.09.09 ---.4.4

More information

WORLD WIDE METRIC OFFERS:

WORLD WIDE METRIC OFFERS: V A L V E S F I T T I N G S T U B I N G F L A N G E S C O U P L I N G S E X P A N S I O N J O I N T S M E T A L S World Wide Metric First choice for quality, service & knowledge Established in 1970, World

More information

NFPA 13 Standard for the Installation of Sprinkler Systems

NFPA 13 Standard for the Installation of Sprinkler Systems Tentative Interim Amendment NFPA 13 Standard for the Installation of Sprinkler Systems 2013 Edition Reference: Chapter 6 TIA 13-2 (SC 12-8-24/TIA Log #1054) Note: Text of the TIA issued and incorporated

More information

WEIGHT OF PIPING MATERIALS

WEIGHT OF PIPING MATERIALS WEIGHT OF PIPING MATERIALS WEIGHTS OF PIPING MATERIALS INTRODUCTION The tabulation of weights of standard piping materials presented on the following pages has been arranged for convenience of selection

More information

Stainless steel tube & pipe fittings

Stainless steel tube & pipe fittings ASD metal services klöckner & co multi metal distribution Stainless steel tube & pipe fittings ENTRUSTED TO DELIVER METAL SOLUTIONS FPAL UVDB Verify Registered Verified BRO 1604-2 07/13 Introduction ASD

More information

Stainless Steel Pipe and Flanges

Stainless Steel Pipe and Flanges Stainless Steel Pipe and Flanges Stainless Steel 4 Pipe and Flanges Photography courtesy of Outokumpu, Arcelor, Atlas Steels and New Zealand Tube Mills. Stainless steel pipe and fittings A stainless steel

More information

FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE

FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE 1913 Vancouver, BC

More information

PIPE INDEX STAINLESS STEEL WELDED / SEAMLESS PIPE DIMENSION AND WEIGHT 2

PIPE INDEX STAINLESS STEEL WELDED / SEAMLESS PIPE DIMENSION AND WEIGHT 2 INDEX STAINLESS STEEL WELDED / SEAMLESS DIMENSION AND WEIGHT STAINLESS STEEL WELDED TYPE 0L S, ALLOWABLE WORKING PRESSURE STAINLESS STEEL WELDED TYPE 0 ALLOWABLE WORKING PRESSURE STAINLESS STEEL WELDED

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

jaks resources berhad ProductCatalogue

jaks resources berhad ProductCatalogue ProductCatalogue Contents 1 ABOUT US 2 QUALITY ASSURANCE & PIPES MANUFACTURING METHOD 3 MAIN PRODUCTS 4 SPECIFICATIONS & APPLICATION 5 WELDED STEEL PIPES - CLASS LIGHT 6 WELDED STEEL PIPES - CLASS MEDIUM

More information

+91-8079449636 Girnar Stainless http://www.girnarstainless.com/ We are one of the topmost manufacturers and suppliers of high quality Metal Products. Owing to their high tensile strength, robust design,

More information

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below: Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees

More information

SECTION METAL STAIRS, LADDERS, AND WALKWAYS

SECTION METAL STAIRS, LADDERS, AND WALKWAYS SECTION 05510 METAL STAIRS, LADDERS, AND WALKWAYS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Technical requirements for metal stairs, ladder, and walkways. 1.2 REFERENCES A. General: References to

More information

WELDED AND SEAMLESS PIPE

WELDED AND SEAMLESS PIPE WELDED AND SEAMLESS PIPE MATERIAL SPECIFICATIONS Antec offers a stock range of seamless and longitudinally welded pipe to American standards, with other specifications (eg: spirally welded) available to

More information

WALKWAYS LADDER RUNGS

WALKWAYS LADDER RUNGS BACK FORWARD STEEL PLATES/ LAMINAS/ PLANCHAS SAFETY PRODUCTS STEEL PLATES LAMINAS PLANCHAS ASTM A 36 A 36 ABS CERTIFIED AR 400 AR 500 ASTM 514 ASTM A 515 GR 50/60/70 ASTM A 516 GR 50/60/70 CORTEN OR ASTM

More information

Caps STANDARD WEIGHT Inches / Pounds

Caps STANDARD WEIGHT Inches / Pounds Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

BS 4504 Circular Flanges - General

BS 4504 Circular Flanges - General BS 4 Circular Flanges - General British Standard BS 4 : Section 3.1 : 1989 - Circular Flanges for Pipes, Valves and Fittings ( Designated), Specification for Steel Flanges. This covers flanges in nominal

More information

Mission Statement. State Steel strives to provide quality products and services at competitive

Mission Statement. State Steel strives to provide quality products and services at competitive Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories

More information

FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE

FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL FULL SERVICE SUPPLIER OF CORROSION RESISTANT METALS SINCE 1913 STAINLESS STEEL

More information

1.3.3 When pipe is required for close coiling, this should b specified on the order.

1.3.3 When pipe is required for close coiling, this should b specified on the order. SA 36* SA 53* Covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded contrsuction of bidges and buildings, and for general structural purposes. When the

More information

TESTING LABORATORY ROURKELA

TESTING LABORATORY ROURKELA TESTING LABORATORY ROURKELA 1. Background: Keeping in view of the growing demand of quality of the products of the industries, Govt. has established Testing Laboratory, Rourkela, under the Directorate

More information

American Society of Mechanical Engineers

American Society of Mechanical Engineers American Society of Mechanical Engineers ASTM A53 /ASME SA53 Pipe Steel Black and Hot Dipped Zinc Coated Welded and Seamless ASTM A105/ASME SA105 Forgings, Carbon Steel, for Piping Components ASTM A106/ASME

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

ASME B31.3 Process Piping

ASME B31.3 Process Piping ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Pressure Design of Metals - 1 Piping Development Process 1. Establish applicable system standard(s)

More information

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1

Section 7. Socket Weld and Threaded Fittings. Socket Weld and Threaded Fittings 7-1 Section 7 Socket Weld and Threaded Fittings This Section contains dimension and tolerance information extracted from American and British specifications applicable to socket weld and threaded fittings.

More information

The City of Winnipeg Section Turtle Island Community Centre Renovation Page 1 of 5

The City of Winnipeg Section Turtle Island Community Centre Renovation Page 1 of 5 Turtle Island Community Centre Renovation Page 1 of 5 Part 1 General 1.1 SECTION INCLUDES.1 Shop fabricated ferrous metal items..2 Shop fabricated aluminum items..3 Steel pipe handrails balusters, and

More information

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART OUR KNOWLEDGE SETS US APART Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts & Bolts TABLE OF CONTENTS Flange Details - Class 125............................................2 Designation

More information

Carbon. Stainless. We have you covered >TUBING >PIPE >BAR >TUBING >PIPE >FITTINGS >FLANGES >BAR

Carbon. Stainless. We have you covered >TUBING >PIPE >BAR >TUBING >PIPE >FITTINGS >FLANGES >BAR Carbon or Stainless Carbon >TUBING >PIPE >BAR Alloy Stainless Steel Aluminum >TUBING >PIPE >FITTINGS >FLANGES >BAR We have you covered www.mkcanada.com www.specialtysteels.com Looking for Carbon tubing,

More information

Forged High Pressure Pipe Fittings

Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Forged High Pressure Pipe Fittings Summary : Type 1. Elbow, Tee, Cross, Coupling, Half Coupling, Cap, Plug, Bushing, Union, HEX. Nipple, Swage nipple, Bull Plug, Street

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

37/38 Pneumatic Spring Diaphragm Actuator

37/38 Pneumatic Spring Diaphragm Actuator GE Oil & Gas Technical Specifications 05/2013 Masoneilan* Valves 37/38 Pneumatic Spring Diaphragm The 37/38 Series actuator is designed to provide high performance, reliability and long service life. Features

More information

Galvanized Pipe. Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available.

Galvanized Pipe. Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available. Galvanized Pipe Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available. Angle rings are needed to secure connections. See pages

More information

SECTION 15010 GENERAL REQUIREMENTS, MECHANICAL. 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1.

SECTION 15010 GENERAL REQUIREMENTS, MECHANICAL. 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1. SECTION 15010 June 16, 2005 GENERAL REQUIREMENTS, MECHANICAL A. GENERAL 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1. 2. All piping shall be in accordance

More information

MANUFACTURERS OF STUD BOLTS, THREADED RODS, ANCHOR BOLTS, HEX BOLTS, SOCKET SCREWS, HEX NUTS & WASHERS

MANUFACTURERS OF STUD BOLTS, THREADED RODS, ANCHOR BOLTS, HEX BOLTS, SOCKET SCREWS, HEX NUTS & WASHERS MANUFACTURERS OF STUD BOLTS, THREADED RODS, ANCHOR BOLTS, HEX BOLTS, SOCKET SCREWS, HEX NUTS & WASHERS PRODUCT DESCRIPTION STANDARD / SIZE MATERIAL/ THREAD TYPE RANGE GRADE/FINISH Full Threaded Hexagon

More information

SECTION OUTLET, JUNCTION, AND PULL BOXES

SECTION OUTLET, JUNCTION, AND PULL BOXES SECTION 16135 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes requirements for outlet boxes for use with wiring devices and lighting fixture outlets. 1.02 REFERENCE STANDARDS A. California Code of

More information

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved.

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved. PROPER HANGING OF FIRE SPRINKLER SYSTEMS 2010 IFSA. All rights reserved. 1 HANGING PER NFPA 13 2 Historical developments and basic concepts Hangers Hanger installation Special listed pipe Hangers in earthquake

More information

DESIGN STANDARDS SECTION

DESIGN STANDARDS SECTION PART 1 - GENERAL 1.01 Provide floor cleanouts on main waste piping installed above finished spaces at all levels to facilitate maintenance. This requirement is in addition to code required cleanouts. 1.02

More information

PNEUMATIC CONVEYING COMPONENTS

PNEUMATIC CONVEYING COMPONENTS A H I G H - P E R F O R M A N C E C O M P A N Y PNEUMATIC CONVEYING COMPONENTS TUBING, PIPE, BENDS, COUPLINGS & FITTINGS H-P Products is certified to ISO 9001:2008 Welcome to H-P Products! H-P Products

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

DIAPHRAGM TYPE GAUGES

DIAPHRAGM TYPE GAUGES GENERAL PURPOSE GAUGES These gauges are suitable for Air, Oil, Gases and Liquids that are not corrosive to copper, oil and steel and for general Industrial Applications such as Boilers, Pumps, Compressors,

More information

STAINLESS STEEL PIPE/TUBE & PIPE FITTINGS

STAINLESS STEEL PIPE/TUBE & PIPE FITTINGS STAINLESS STEEL PIPE/TUBE & PIPE FITTINGS In 1984, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American

More information

NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments

NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments NAVSEA STANDARD ITEM ITEM NO: 009-52 DATE: 30 JUL 2015 CATEGORY: II 1. SCOPE: 1.1 Title: Relief Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and

More information

SHALCO. Seamless Pipes & Tubes Welded Pipes & Tubes Surface Polished Steel. Industries Pvt. Ltd

SHALCO. Seamless Pipes & Tubes Welded Pipes & Tubes Surface Polished Steel.  Industries Pvt. Ltd SHALCO Industries Pvt. Ltd Seamless Pipes & Tubes Welded Pipes & Tubes Surface Polished Steel www.shalco.in Company Profile Shalco was formed in year 2000 with a vision of its parent company, Shah Hastimal

More information

STANDARD SPECIFICATION FOR IMPULSE PIPING & TUBING DOCUMENT NO : 44-LK /J.02/0015-A4

STANDARD SPECIFICATION FOR IMPULSE PIPING & TUBING DOCUMENT NO : 44-LK /J.02/0015-A4 Page 1 of 5 STANDARD SPECIFICATION FOR IMPULSE PIPING & TUBING DOCUMENT NO : 44-LK-5100-00/J.02/0015-A4 Rev No. Issue Date Pages Rev Description Prepared A 12.08.08 5 Issued for Comments / Approval Checked

More information

Copper and Copper Alloy Tube, Pipe and Fittings

Copper and Copper Alloy Tube, Pipe and Fittings Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

More information

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe Black and Galvanized Steel Pipe PIPE Wheatland Steel Pipe is made by specialists who understand that it s the small details that make the difference between average products and superior products. At the

More information

AMERICAN SOCIETY OF TESTING MATERIALS (ASTM)

AMERICAN SOCIETY OF TESTING MATERIALS (ASTM) AMERICAN SOCIETY OF TESTING MATERIALS (ASTM) The Volume#1 details the standars for: 1. standards for various types of steel pipes specifying requirements for high-temperature services, ordinary use, and

More information

SECTION 02824 EXPANDED METAL MESH FENCE

SECTION 02824 EXPANDED METAL MESH FENCE SECTION 02824 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for expanded metal mesh fence on the right-of-way. 1.02 REFERENCE STANDARDS A. ASTM International (ASTM): 1.03 SUBMITTALS

More information

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:

5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose: PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

Exclusive Glass Door Hardware by Izerwaren.Com

Exclusive Glass Door Hardware by Izerwaren.Com Exclusive Glass Door Hardware by Izerwaren.Com BRASS PLATED GLASS DOOR LATCHES for 3/8 to 1/2 inch thick glass 316 STAINLESS STEEL GLASS DOOR HINGES for 3/8 to 1/2 inch thick glass Wall to glass hinge

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

SPECIFICATION. Specification for Piping Design / Materials

SPECIFICATION. Specification for Piping Design / Materials Sheet 1 of 20 APPROVALS DATE REV DCN NO. BY CHECK DCC DATE AUTHOR: 3/2/11 V1 For Installation CHECKED: APPROVED: DCC RELEASE TABLE OF CONTENTS 1.0 SCOPE 2.0 CODES AND STANDARDS 3.0 MATERIAL/MANUFACTURING

More information

... THE COMPANY. Fast service and a firm concern for quality are the basis of our growth and our constant progress.

... THE COMPANY. Fast service and a firm concern for quality are the basis of our growth and our constant progress. THE BALL VALVES THE GROUP... Promoted by Mr. B.L. Shaw, the NECO GROUP is one of the largest Industrial Groups in India. Among the many activities ( mining, infrastructures, automotive, etc. ) that count

More information

B.R.ENTERPRISE. One piece Two piece Three piece Four piece Cryogenic Trunnion Mounted

B.R.ENTERPRISE. One piece Two piece Three piece Four piece Cryogenic Trunnion Mounted Web Site : www.brvalves.in ABOUT US Established in 1 st August, 2014, B.R.Enterprise has been involved in Trading and Supplying of various industrial products like Industrial Valves, Actuated Valves, Pipes

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.

ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16. ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe

More information

SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS

SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work

More information

Diaphragm seal with flange connection With flush diaphragm Model

Diaphragm seal with flange connection With flush diaphragm Model Diaphragm seals Diaphragm seal with flange connection With flush diaphragm Model 990.27 WIKA data sheet DS 99.27 for further approvals see page 3 Applications Chemical process industry Petrochemical industry

More information

PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT

PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT GENERAL INFORMATION 1.1 This section applies to piping systems for chilled water, hot water, condenser water, steam, condensate return, fuel oil, refrigerant

More information

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and

More information

THOMAS PUMP & MACHINERY, INC. MADE IN U.S.A.

THOMAS PUMP & MACHINERY, INC. MADE IN U.S.A. THOMAS PUMP & MACHINERY, INC. MADE IN U.S.A. How Does the GTO RHINO Operate? Liquid enters the pump via the suction line (Yellow) of the specially designed, interchangeable distribution manifold, passes

More information

MTA UNIVERSAL STATION PEDESTRIAN BRIDGE Los Angeles, CA. Project Manual and Specification 100% PE SUBMITTAL TABLE OF CONTENTS

MTA UNIVERSAL STATION PEDESTRIAN BRIDGE Los Angeles, CA. Project Manual and Specification 100% PE SUBMITTAL TABLE OF CONTENTS Los Angeles, CA Project Manual and Specification DIVISION 1 GENERAL CONDITIONS 01 01 10 STATEMENT OF WORK 01 11 00 SUMMARY OF THE WORK 01 14 05 METRO (OWNER) - DIRECTED STOPPAGES 01 20 00 PRICE AND PAYMENT

More information

PRODUCT CATALOGUE. Cryogenic Valves

PRODUCT CATALOGUE. Cryogenic Valves PRODUCT CATALOGUE Cryogenic Valves A FEW FACTS ABOUT MACK S. Since its establishment in 1939, Mack Valves have grown to become a leading provider of unique flow control, pressure reducing and safety relief

More information

Stainless Steel Tube and Fittings

Stainless Steel Tube and Fittings Stainless Steel Tube and Fittings Stainless Steel 5 Tube and Fittings Photography courtesy of Outokumpu, Arcelor and New Zealand Tube Mills. Stainless steel tube and fittings As-welded (AW) tube Stainless

More information

Republic of Turkey Ministry of Economy, 2014 0

Republic of Turkey Ministry of Economy, 2014 0 Republic of Turkey Ministry of Economy, 2014 0 BUILDING MATERIALS Construction is one of the key sectors in Turkey, being one of the main drivers of private and public investments in Turkey. As a result

More information

ASTM A-48 A-691 ASTM A-500 Tubing ASTM B-75 B626 Only general information is presented here. Please contact ASTM for greater detail.

ASTM A-48 A-691 ASTM A-500 Tubing ASTM B-75 B626 Only general information is presented here. Please contact ASTM for greater detail. ASTM A-48 A-691 ASTM A-500 Tubing ASTM B-75 B626 Only general information is presented here. Please contact ASTM for greater detail. ASTM Number Explanation A-48 This specification covers gray iron castings

More information

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25 TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140

More information

w/ Centering Ring SWG - Internal Ring Material* Centering Ring Material* Filler Material

w/ Centering Ring SWG - Internal Ring Material* Centering Ring Material* Filler Material Materials: Max. Temp. Range Stainless Steel 304 760 C Stainless Steel 316L 760 C Filler Materials: Graphite 523 C PTFE 260 C Guide Ring Materials: Carbon Steel 538 C Inner Ring Materials: Stainless Steel

More information

5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector galvznized steel bolt w/ washers and nut. Anchor 3" sq. 7 Ga.

5/16 Flange nut. Bolt Keeper Plate (8 Sq. SYS.) (3) 1/2 x 3 Hex head connector galvznized steel bolt w/ washers and nut. Anchor 3 sq. 7 Ga. 2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector galvznized

More information

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING

More information

SECTION FIRE SUPPRESSION SPRINKLER SYSTEM

SECTION FIRE SUPPRESSION SPRINKLER SYSTEM SECTION 21 1300 21 1300-1 PART 1 - GENERAL 1.1 DESCRIPTION A. The provisions of the General Requirements, Supplementary Requirements, and Division 1 apply to the plumbing work specified in this Division.

More information

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES

DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for

More information

NAVSEA STANDARD ITEM

NAVSEA STANDARD ITEM NAVSEA STANDARD ITEM FY-18 DATE: 18 NOV 2016 CATEGORY: II 1. SCOPE: 1.1 Title: Threaded Fastener Requirements; accomplish 2. REFERENCES: 2.1 Standard Items 2.2 S9086-CJ-STM-010/075, Fasteners 3. REQUIREMENTS:

More information

Stainless Steel Instrumentation Fractional / Metric Tubing

Stainless Steel Instrumentation Fractional / Metric Tubing Tubing benefits Tubing has many benefits against piping. Pipe threading or welding is difficult to disassemble and re-assemble. Piping requires skilled worker for welding & threading. Piping is bulky.

More information

CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts.

CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts. CODES AND STANDARDS T. N. GOPINATH For scientific design of Piping Systems, selection of proper material of construction and to detail out the material specifications, knowledge of Codes and Standards

More information

PIPE HANGERS & SUPPORTS

PIPE HANGERS & SUPPORTS PIPE HANGERS & SUPPORTS Q U A L I T Y CCTF is engaged in the supply and distribution of pipe, pipe hangers, fittings, flanges and grooved products of various types and for a wide range of applications.

More information

PRODUCT LIST. BALON Ball Valves, Cast Iron, Cast Steel, SS AMERICAN AMETEK APOLLO VALVES AUTOMAX ATOMAC BURKERT BONNY FORGE CANVIL CENTRON CENTERLINE

PRODUCT LIST. BALON Ball Valves, Cast Iron, Cast Steel, SS AMERICAN AMETEK APOLLO VALVES AUTOMAX ATOMAC BURKERT BONNY FORGE CANVIL CENTRON CENTERLINE PRODUCT LIST AMERICAN AMETEK APOLLO VALVES AUTOMAX ATOMAC Ball Valves, Cast Iron, Cast Steel, Stainless Steel, Teflon Fused Ball Pressure Gauges, Diaphragm Seals Bronze, Steel & Stainless Steel, Ball Valves,

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

SECTION 710 GUARDRAIL MATERIALS

SECTION 710 GUARDRAIL MATERIALS 710.08 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 SECTION 710 GUARDRAIL MATERIALS 710.01 General. Metal beam

More information

LITITZ MUTUAL INSURANCE COMPANY 2 North Broad Street Lititz, Pennsylvania - MAIN OFFICE -

LITITZ MUTUAL INSURANCE COMPANY 2 North Broad Street Lititz, Pennsylvania - MAIN OFFICE - The original section of this building was constructed in 1941. The exterior walls are built of good quality stone. In the early 1980 s a similar addition was added to the north elevation. The exterior

More information

SUMMARY OF BILL OF QUANTITIES

SUMMARY OF BILL OF QUANTITIES SUMMARY OF BILL OF QUANTITIES GN. FUVAHMULAKU JETTY Summary Bill No Description Amount 1 PRELIMINERIES 0.00 2 GROUND WORK 0.00 3 CONCRETE 0.00 4 MASONRY, PLASTERING 0.00 5 METAL AND TIMBER WORKS 0.00 6

More information

STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS

STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for providing metal fabricated items like castings, gratings, hatchways, ladders,

More information

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 Building Services Piping. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

The Brands of Excellence

The Brands of Excellence The Brands of Excellence Silvan Industries 2121 Cleveland Avenue P.O. Box 767 Marinette, Wisconsin 54143 Tel: 715.735.9311 Fax: 888.506.4271 www.silvanind.com LZR FIT 1119A Bridge Street Tomahawk, Wisconsin

More information

Stainless Steel Piping Products

Stainless Steel Piping Products Stainless Steel Piping Products Stainless Steel and Other Corrosion Resistant Metal Pipe, Tubing, Flanges and Fittings ALASKAN COPPER WORKS A laskan stainless steel pipe and fittings are found throughout

More information

Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049

Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049 Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal

More information

316L Pipe Sizing Calculations and Tables

316L Pipe Sizing Calculations and Tables DISCUSSION For piping systems constructed with a minimum ¾ to a maximum 2-1/2 316L seamless pipe (A312). The physical dimensions and mechanical properties are listed below: Material: 316L : ¾ 2-1/2 Schedule

More information

PRIMARY VALVE STANDARDS

PRIMARY VALVE STANDARDS PRIMARY VALVE STANDARDS MAJOR VALVE STANDARDS PETROCHEMICAL AND REFINING INDUSTRY API 600 Steel Valves Flanged & Buttwelding Ends API 600 is the main steel gate valve specification. Valve design and construction

More information

SECTION 00 0110 TABLE OF CONTENTS. H. 00 2115.01 - Proposed Material, Product or Equipment Substitution Request

SECTION 00 0110 TABLE OF CONTENTS. H. 00 2115.01 - Proposed Material, Product or Equipment Substitution Request SECTION 00 0110 PROCUREMENT AND CONTRACTING REQUIREMENTS 1.1 DIVISION 00 -- PROCUREMENT AND CONTRACTING REQUIREMENTS A. 00 0101 - Project Title Page B. 00 0105 - Certifications Page C. 00 0110 - Table

More information

FIRE PROTECTION WET PIPE FIRE SPRINKLER SYSTEM. E. Shop drawing preparation and submittals as hereinafter described.

FIRE PROTECTION WET PIPE FIRE SPRINKLER SYSTEM. E. Shop drawing preparation and submittals as hereinafter described. SECTION 15300 FIRE PROTECTION WET PIPE FIRE SPRINKLER SYSTEM PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract including General and Supplementary Conditions, Division

More information