Clad Casement Windows Parts Catalog
|
|
- Brianne Jenkins
- 7 years ago
- Views:
Transcription
1 Clad Casement Windows Parts Catalog Clad Wood (Parts for Units Prior to 2005) & Clad Wood Energy Saver (Parts for Units 2005 to present Casement Windows Cover Operating Casement Shown from the Exterior with Sash Open Right Unit Shown in Photo, See page 33 for Venting/Hinging Codes Please Note: When ordering Parts, Complete Sash or Complete Frame Window units, Please View from the EXTERIOR Looking in. The easiest way to determine whether you have a left or right handed unit is by the location of your lock as you are on the inside of the building looking out. If your lock is on the left hand side of your unit when you are unlocking to open your window then it is a left handed unit. Lock on the right side is a right handed unit. July/2009 July/2013 April/ Hurd Windows & Doors CCSE-COVER
2 Table of Contents Page List of Parts Operating Sash Exploded View Operating Sash Elevation & Cross Section Operating Frame Exploded View Wood Stops CCSE-2 CCSE-3 CCSE-4 CCSE-5 CCSE-6 Hardware / Miscellaneous: Casement Hardware, Frame & Sash CCSE-10 Casement Hardware (Encore & DLX) CCSE-11 Casement Hardware (Encore) 9/19/2005 to Present CCSE-12 Casement Hardware (DLX) 2/2/98 to 9/19/2005 CCSE-13 Casement Hardware (1988 to 2/2/1998) CCSE-14 Casement Hardware (Prior to 1988) CCSE-15 Fastener Schedule CCSE-30 Hardware / ping / Miscellaneous CCSE-16, 17, 18 Arm/Track Kits Hardware (Prior to 02/02/1998) CCSE -15 Sash Assembly Order Pages Stationary Picture SNF Section Details & Formulas Stationary Picture SNF; Frame Exploded View/Glass Sizes Glazing Bead Screens w/ Lift Rail 01/1998 to Present Screens w/ Plunger 01/1998 &Prior CCSE-19 CCSE-20 CCSE-21 CCSE-22 CCSE-23 CCSE-24 Glass CCSE-25, 26, 27 Grille Parts CCSE-28, 29 Service Kits Touch Up Paint CCSE-30 CCSE-31 Application of Limit Device CCSE-32 Venting / Hinging Codes Tech Tip: When you see this symbol you will find technical information advice about the part. CCSE-33 CCSE-TBL CNTNT 2009 Hurd Windows & Doors July/2009 July/2013
3 Parts Shown on Exploded : Item No. Description Part Found On: Parts List 1. Operating Wood Sill Stop, Upper Section Frame, CCSE-6 2. Operating Wood Sill Stop, Lower Section - Frame, CCSE-6 3. Sill Stop Blocks CCSE-6 4. Hinge Side Wood Stop CCSE-6 5. Lock Side Wood Stop CCSE-7 6. Lock Side Support Stops CCSE-7 7. Operating Wood Head Stop CCSE-7 8. HingeTrack CCSE Hinge Arm Sash, CCSE-3, CCSE Dual Arm Operator Frame, CCSE-5, CCSE Encore Handle Frame, CCSE-5, CCSE Sash Bracket Sash, CCSE-3, CCSE-12, CCSE Lock Handle Frame, CCSE-5, CCSE Keeper Sash, CCSE-3, CCSE Lock Escutcheon Frame, CCSE-5, CCSE Tie Bar w/ Link & Guides Frame, CCSE-5, CCSE Dual Arm Sash Track Sash, CCSE-3, CCSE Dual Arm Sash Track Shoe Sash, CCSE-3, CCSE Snubbers Frame / Sash, CCSE-3, CCSE-5, CCSE Encore Operator Cover Frame, CCSE-5, CCSE Sash Lift Block Sash, CCSE-3, CCSE Nailing Fin Corner Pads CCSE-5, CCSE Offset Bulb CCSE-3, CCSE Sill Folding Nailing Fin CCSE-5, CCSE Head & Side Folding Nailing Fin CCSE-5, CCSE Frame Lift Block CCSE-5, CCSE Glass CCSE-3, CCSE-19, CCSE-20, 21, CCSE-25, 26, Sash Tall Bulb CCSE Screen Frame, CCSE-5, CCSE-23, CCSE Glazing Bead Sash, CCSE-3, CCSE Complete Sash Operating / Stationary CCSE-3, CCSE-4 CCSE-19, 20, 21 Parts Not Shown on Exploded View: Hinge Clip DLX Keeper Locator Construction T Handle Truth Handles used on DLX and Prior Casement Hardware DLX 2/2/98 to 9/19/05 Casement Hardware (1988-2/2/1998) Split Arm Operator Handed Sash Lock and Keepers Casement Operator Prior to 1988 Sash Alignment Snubber Anti Bow Clip Sash Limit Device Structural Nail Fin 2 Piece Surround Sash, CCSE-10 CCSE-11 CCSE-12 CCSE-13 CCSE-13 CCSE-14 CCSE-14 CCSE-15 CCSE-15 CCSE-15 CCSE-16 CCSE-16 CCSE-17 CCSE-17 July/ Hurd Windows & Doors CCSE-2
4 Sash Exploded View & Details SASH AS VIEWED FROM THE INTERIOR Important: When ordering Unit is Viewed from the EXTERIOR. NOTE: #9. TOP SASH HINGE ARM ATTACHED TO #8. TOP HINGE TRACK ON THE FRAME #9. Hinge Arm 29. Tall Bulb Item Page 9. CCSE CCSE-12, CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE-22 See Page CCSE-2 for Complete Parts List. Energy Saver Sash Mfg. 09/17/2007 to Present (Shown in Exploded View) 29. Tall Bulb 20. Sash Snubbers 15. Keeper 30. Glass 2 Piece Replacement ASA P. CCSE-17 ASA Energy Saver Sash Mfg. From 09/2005 to 09/17/ Tall Bulb #18. Dual Arm Sash Track 13. Sash Bracket 32. Sash/Glass Glazing Bead 22. Sash Lift Block #19. Dual Arm Sash Track Shoe NOTE: #9. HINGE ARM, ATTACHES TO #8 SILL FRAME HINGE TRACK #19. Sash Track Shoe Shown on #18. Sash Track Assembled together, please order #18 & 19 when replacing the track or shoe. #9. Hinge Arm 32. Sash / Glass Glazing Bead 33. Complete Sash CCSE-16 Weatherstip Only Classic Sash Shown Not Available (Full Replacement Sash = Current Energy Saver Sash) See Page CCSE-4, CCSE-19 CCSE Hurd Windows & Doors July/2009
5 TO PRESENT Operating Sash Elevation View & Details CLAD CASEMENT OPERATING SASH ASSEMBLY AND DETAILS SASH AS VIEWED FROM EXTERIOR B SECTION B-B RAIL CLADDING 29. Tall Bulb WOOD RAIL 32. Glazing Bead SASH HEIGHT GLASS HEIGHT DAY LIGHT OPENING HEIGHT 30. Glass A A Exterior Interior STILE CLADDING 29. Tall Bulb WOOD STILE SECTION A-A Exterior B 32 Glazing Bead Interior SASH WIDTH 30. Glass STILE CLADDING WOOD STILE 32. Glazing Bead RAIL CLADDING 29. Tall Bulb 29. Tall Bulb 32. Glazing Bead WOOD RAIL Item Page 29. CCSE CCSE CCSE-22 See Page CCSE-2 for Complete Parts List of Items. DAY LIGHT OPENING Sash Formulas: GLASS WIDTH Day Light Opening Width = Glass Width -.875" Glass Width = Daylight Opening +.875" Sash Width = Glass " Sash Width = Basic Unit Width " Day Light Opening Height = Glass -.875" Glass Height = Day Light Opening Height +.875" Sash Height = Glass " Sash Height = Basic Unit Height " July/ Hurd Windows & Doors CCSE-4
6 Frame Exploded View, Left Hand Unit Shown SASH AS VIEWED FROM THE INTERIOR Important: When ordering, Unit is 26. Folding Head Viewed from the EXTERIOR Nail Fin looking in. 24. Bulb 23. Nailing Fin Corner Pad 8. Hinge Track 23. Nailing Fin Corner Pad 7. Operating Head Stop 4. Hingeside Wood Stop Item Page 1. CCSE-6 2. CCSE-6 3. CCSE-6 4. CCSE-6 5. CCSE-7 6. CCSE-7 7. CCSE-7 8. CCSE CCSE CCSE CCSE Folding Side Nail Fin 31. Screen Item Page 16. CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE-23, 24 See Page CCSE-2 for Complete Parts List. 26. Folding Side Nailing Fin 6. Lockside Support Stop 17. Tie Bar w/ Link & Guides 8. Hinge Track 5. Lockside Wood Stop 28. Frame Sash Lift Block 24. Offset Bulb 23. Nailing Fin Corner Pad 25. Folding Sill Nailing Fin 14. Sash Lock Handle 16. Escutcheon Complete Frame 6. Lockside Support Stop 3. Sill Stop Block Please note: For Frame Only, give Basic Unit Height and Basic Unit Width when ordering. 2. OperatingWood Sill Stop 11. Encore Operator LH Shown 20. Frame Snubber 3. Sill Stop Block 23. Nailing Fin Corner Pad 21. Cover 12. Handle 1. Operating Wood Sill Stop 2. Lower Wood Sill Stop CCSE Hurd Windows & Doors July/2009
7 Wood Stops Item 1 Operating Sill Stop (Upper Section) 11 CCSE Sill Upper Section 15 CCSE Sill Upper Section 19 CCSE Sill Upper Section 23 CCSE Sill Upper Section 27 CCSE Sill Upper Section 31 CCSE Sill Upper Section L/F Item 2 (Encore & DLX) Operating Sill Stop (Lower Section) Lockside and Hingeside Sill Stop required when ordering. 11 CCSE Lower Sill Stop - Lockside 15 CCSE Lower Sill Stop - Lockside 19 CCSE Lower Sill Stop - Lockside 23 CCSE Lower Sill Stop - Lockside 27 CCSE Lower Sill Stop - Lockside 31 CCSE Lower Sill Stop - Lockside 11, 15, 19, 23, 27, 31 CCSE Lower Sill Stop - Hingeside Part No Part No Split Arm Operating Sill Stop (2 Pcs. Required) Part No. CCSE Split Arm Lower Section (35-1/2" piece) (11" - 27" widths require field modification.) Item 3 Sill Stop Block (2 Pcs. / Operating Unit) CCSE Sill Stop Block, each CCSE Sill Stop Block, per lineal foot Item 4 (Encore & DLX) Operating Hingeside Stop For Tie Bar Style Units 19 CCSE Hingeside Stop 23 CCSE Hingeside Stop 27 CCSE Hingeside Stop 31 CCSE Hingeside Stop 35 CCSE Hingeside Stop 43 CCSE Hingeside Stop 47 CCSE Hingeside Stop 55 CCSE Hingeside Stop 59 CCSE Hingeside Stop 67 CCSE Hingeside Stop L/F Part No Part No Tech Tip: Can also be used for Split Arm Lockside Stops with field modification. July/ Hurd Windows & Doors CCSE-6
8 Wood Stops Right Shown Item 5 (Encore & DLX) Operating Lockside Stops (LH and RH Units) For Tie Bar Style Units 19 CCSE Lockside Stop 23 CCSE Lockside Stop 27 CCSE Lockside Stop 31 CCSE Lockside Stop 35 CCSE Lockside Stop 43 CCSE Lockside Stop 47 CCSE Lockside Stop 55 CCSE Lockside Stop 59 CCSE Lockside Stop 67 CCSE Lockside Stop L/F Part No. Left Right Item 6 Operating Lockside Support Block CCSE Support Block, each CSSE Lockside Support Block, per lineal foot Part No Item 7 Operating Head Stop For Lift Rail Style Screen only 11 CCSE Operating Head Stop 15 CCSE Operating Head Stop 19 CCSE Operating Head Stop 23 CCSE Operating Head Stop 27 CCSE Operating Head Stop 31 CCSE Operating Head Stop L/F Part No Tech Tip: Head Stop for Plunger Style Screen not available. Lift Rail Screens offered after 2/2/98. CCSE Hurd Windows & Doors July/2009
9 A. Stationary Head and Sill Stop (2 Pcs. / unit required) Part No. Wood Stops 11 CCSE Stationary Head and Sill Stop 15 CCSE Stationary Head and Sill Stop 19 CCSE Stationary Head and Sill Stop 23 CCSE Stationary Head and Sill Stop 27 CCSE Stationary Head and Sill Stop 31 CCSE Stationary Head and Sill Stop 35 CCSE Stationary Head and Sill Stop 43 CCSE Stationary Head and Sill Stop 47 CCSE Stationary Head and Sill Stop 55 CCSE Stationary Head and Sill Stop 59 CCSE Stationary Head and Sill Stop 67 CCSE Stationary Head and Sill Stop L/F B. Stationary Side Stop (2 Pcs. / unit required) Part No. 11 CCSE Stationary Side Stop 15 CCSE Stationary Side Stop 19 CCSE Stationary Side Stop 23 CCSE Stationary Side Stop 27 CCSE Stationary Side Stop 31 CCSE Stationary Side Stop 35 CCSE Stationary Side Stop 43 CCSE Stationary Side Stop 47 CCSE Stationary Side Stop 55 CCSE Stationary Side Stop 59 CCSE Stationary Side Stop 67 CCSE Stationary Side Stop L/F Stationary Stop A. B. E. Cut View E.-E. Sill Stop Shown Head & Sides Similar Head, Sill and Side Jamb Extender L/F Part# Stationary Unit Frame Shown from Interior E. B. A. July/2009, Dec/ Hurd Windows & Doors CCSE-8
10 Wood Stops C. Head and Sill Stationary Screw Covers Part No. 11 CCSE Head and Sill Stationary Screw Covers 15 CCSE Head and Sill Stationary Screw Covers 19 CCSE Head and Sill Stationary Screw Covers 23 CCSE Head and Sill Stationary Screw Covers 27 CCSE Head and Sill Stationary Screw Covers 31 CCSE Head and Sill Stationary Screw Covers 35 CCSE Head and Sill Stationary Screw Covers 43 CCSE Head and Sill Stationary Screw Covers 47 CCSE Head and Sill Stationary Screw Covers 55 CCSE Head and Sill Stationary Screw Covers 59 CCSE Head and Sill Stationary Screw Covers 67 CCSE Head and Sill Stationary Screw Covers L/F D. Side Stationary Screw Cover Part No. 11 CCSE Side Stationary Screw Covers 15 CCSE Side Stationary Screw Covers 19 CCSE Side Stationary Screw Covers 23 CCSE Side Stationary Screw Covers 27 CCSE Side Stationary Screw Covers 31 CCSE Side Stationary Screw Covers 35 CCSE Side Stationary Screw Covers 43 CCSE Side Stationary Screw Covers 47 CCSE Side Stationary Screw Covers 55 CCSE Side Stationary Screw Covers 59 CCSE Side Stationary Screw Covers 67 CCSE Side Stationary Screw Covers L/F Tech Tip: Began using screw covers August, Screw Cover C. D. D. F. F. Cut View F.-F. Sill Shown Head & Sides Similar Head, Sill and Side Jamb Extender L/F Part# C. CCSE Hurd Windows & Doors July/2009
11 Item No. 17 Items 8-20 Frame & Sash Hardware (Applicable to Encore, DLX, Split Arm as noted Feb 1998 to Present) Description Egard, Standard Stainless Steel, Optional Left Right Left Right 19 Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar w/guides - Encore & DLX Tie Bar Guide only Part No. Hardware / Miscellaneous Tie Bar w/guides Left Tie Bar Shown 6 x 3/4" PH FL HD SM SS BRN Screw (2) Part# Tie Bar Guide Tie Bar Guide Schedule Unit Height Tie Guides Required 11", 15" 1 23", 27", 35", 43", 47" 2 55", 59", 67" 3 Note: Fasteners are ordered separately. 20 CCSE Stainless Steel Sash Snubber #7 x 1" PH FLSS Screw (2) Part # CCSE Frame Snubber Snubber Schedule 43-47, 55 Unit Heights = 2 per unit 59 and 67 Unit Heights = 4 per unit Sash Snubber #6 x 5/8" SPD PH TRUSS HD Screw (2) Part# Frame Snubber Not Shown on Exploded CCSE Hinge Clip (23 Egress only) CCSE Hinge Clip (14") Hinge Clip (23 Egress only) Hinge Clip July/2009, April/2011, April/ Hurd Windows & Doors CCSE-10 Rev. 01/20/2009 Added Screws to Hinge Arm. Rev. 2 02/19/2009 Updated Tie Bar. Added screws to Sash Snubber. Rev. 3 05/12/2009 Removed individual tracks/arms. See Page 15 for repalcements Rev. 04/04/2014 Changed to
12 Hardware / Miscellaneous Note: Fasteners are ordered separately. Items Casement Hardware Encore and DLX Part No. Item No. Description Left Right 15 CCSE Keeper 27, 31,35 Unit Heights = 1 per unit 43 and 47 Unit Heights = 2 per unit 55, 59, 67 Units Heights = 3 per unit Keeper Lock Handle & Escutcheon Shown Assembled #8 x 1-1/4" PH FH HD SM SS Screw (2) Part # Sash Lever Lock Handle 14 CCSE Lever Lock Handle Gold Tone White Bronze Bright Brass Antique Brass Oil-Rubbed Bronze Coppertone Champagne Brushed Nickel Brushed Chrome Polished Chrome Bug Guard Lock Escutcheon Guard Part# , Qty 2 per Lock Escutcheon, Ordered Separately 16 CCSE Lock Escutcheon WITH Guard Gold Tone White Bronze Bright Brass Antique Brass Oil-Rubbed Bronze Coppertone Champagne Brushed Nickel Brushed Chrome Bright Chrome CCSE Rustic Lock Lever Handle & Escutsheon w/guards Rustic - Light Bronze Rustic - Dark Bronze Part# s include Lever Lock Handle & Escutcheon w/guard #7 x 7/8" PH FL HD SS Screw (3) Part# Keeper Locator Dual Arm Sash Track DLX Keeper Locator CCSE Dual Arm Sash Track CCSE Dual Arm Sash Track Shoe Please note, # 18 & 19 is an assembly. Please order both parts when replacing the track or shoe. Track Shoe CCSE Hurd Windows & Doors, Inc. February/2009, Oct/2009 Revision 1: Changed Lock Escutcheon Part # s to with Guard. # s were without, no longer reference these. Rev. 2 Changed Oil-Rubbed Bronze Part # s. 07/06/09; Oct/2009 Added Rustic Part# s
13 Notes: - Encore hardware is interchangeable with DLX units. - Fasteners are ordered spepartely, See page 15 for a complete list and part numbers. Casement Hardware Encore (9/19/05 to Present) Part No. Item No. Description Left Right 11 CCSE Encore Dual Arm Operator Hardware / Miscellaneous Silver worm screw 11 CCSE Encore Dyad Arm Operator (11, 15 width) With E-Gard Finish CCSE Encore Reverse Dyad For small speciality windows. With E-Gard Finish Right Dual Arm Operator with Right Operator Cover and Handle Package Silver worm screw Not Shown on Exploded Left Dyad Operator with Right Operator Cover and Handle Package 13 Right Dyad Operator with Left Operator Cover and Handle Package Construction T Handle Sept to Present CCSE Sash Bracket - Encore & DLX For Dual Arm & Dyad Operator CCSE Sash Bracket - Split Arm CCSE Bracket Non-handad Reverse Dyad Operator Bracket Sash Bracket Left Dual Arm Operator with Left Operator Cover and handle Package FOR: Left Dual Arm Operator or Right Dyad Operator FOR: Right Dual Arm Operator or Left Dyad Operator 12 & 21 Encore Operator Cover and Handle Set Package Gold Tone White Bronze Bright Brass Antique Brass Oil-Rubbed Bronze Coppertone Champagne Brushed Nickel Brushed Chrome Polished Chrome Tech Tip: Encore cover and handles sold as sets only. Note: When ordering replacement operators, note the configuration of left and right hand operators and their corresponding cover and handle packages. Take care that the correct cover and handle package is ordered with your operator. Left Right Operator Cover and Handle Package Left Operator Cover and Handle Package Shown Assembled Left Operator Cover and Handle Package Right Rustic - Light Bronze Rustic - Dark Bronze January/2009, Oct/ Hurd Windows & Doors CCSE-12 Rev. 01/20/2009 Corrected Left and Right Handle Call-Outs, Rev. 2 07/06/2009 Chng d Oil Rubbed part # s; Oct/2009 Added Rustic Part# s
14 Casement Hardware DLX 2/2/98 to 9/19/05 (Not Shown on Exploded ) Part No. Item No. Description Left Right Not Shown on Exploded Hardware / Miscellaneous CCSE Dual Arm Operator Gold Tone White Bronze Bright Brass Oil-Rubbed Bronze Brushed Chrome Notes: Fasteners are ordered separately. Dual Arm Operator (Right-Hand Operator Shown) Dual Arm Bracket LH Part# RH Part# Operator Handle Not Shown on Exploded Not Shown on Exploded Not Shown on Exploded Not Shown on Exploded Handles used on DLX & Prior CCSE Truth Operator Crank Handle Gold Tone White Bronze Bright Brass Oil-Rubbed Bronze Brushed Chrome CCSE Folding Operator Handle Gold Tone White Bronze Bright Brass Oil-Rubbed Bronze Brushed Chrome Operator T Crank Handle Gold Tone White Bronze Bright Brass Operator Hand Knob Gold Tone White Bronze Bright Brass #7 x 7/8" PH FL HD SS Part# (11) Not Shown on Exploded Operator Nesting Cover Gold Tone LH Dyad RH RH Dyad LH White Bronze Oil-Rubbed Bronze Brushed Chrome For use with DLX hardware only. Use with Folding Operator handle. LH Shown (Matched Handing except 11 & 15 which Use Opposite) CCSE Hurd Windows & Doors July/2009 Removed CCSE Dyad Operators, No Longer Available
15 Note: Fasteners are ordered separately. Casement Hardware (All Prior to 2/2/98) Split Arm Operator Part No. Item No. Description Left Right Not Shown on Exploded CCSE 10" Adjustable Hinge Track CCSE Hinge Arm (11, 15, 19, 23, 27) Hardware / Miscellaneous Please Note: Hardware on this page are available as supplies last. If part is unavailable please use kits that are listed on page CCSE-15 #7 x 1/2" PH FL HD SM SS Screw (3) Part# #7 x 7/8" PH FL HD SS Screw Part# (4) Hinge Track CCSE Hinge Clip Tech Tip: Same as Encore/DLX 23" Egress parts. Hinge Arm (Right-Hand Top or Left-Hand Bottom) Hinge Clip Please Note: Only available by orderng at the Hurd Window Center, Phone Not Shown on Exploded CCSE Split Arm Operator - Gold Tone CCSE Split Arm Operator - White Note: All handles used on DLX and prior can be used on split arm except nesting cover. See page CCSE-13. Split Arm Operator (Right-Hand Operator Shown) Sash Bracket 13 CCSE Sash Bracket Sash Bracket Not Shown on Exploded CCSE Handed Sash Lock Gold Tone N/A N/A White N/A N/A Sash Lock #8 x 1-1/4" PH FL HD Screw (2) Part# White Gold Not Shown on Exploded CCSE Keeper- E-gard N/A Keeper #8 x 1" PH PAN HD SMS Screw (2) Part# July/2009, Oct/ Hurd Windows & Doors CCSE-14 Oct/2010 CCSE Handed Sash Locks and Keeper are no longer available
16 Hardware / Miscellaneous Casement Operator Prior to 1988, Please go to truth.com for local dealer to order replacement parts. No longer available from Hurd. Left Hand Shown Item No. Not Shown on Exploded Right Hand Shown Description CCSE Short Arm Operator - Gold (9-1/2" Straight Arm) 11, 15 Glass Widths CCSE Short Arm Operator - White (7-1/2" Straight Arm) 11, 15 Glass Widths CCSE Long Arm Operator - Gold (13-1/2" Straight Arm) 19, 23, 27, 31 Glass Widths CCSE Long Arm Operator - White (13-1/2" Straight Arm) 19, 23, 27, 31 Glass Widths No longer available from Hurd. ARCH CCSE Single Arm Operator - Gold (7-1/2" Straight Arm) 11, 15 Glass Widths TechTip: Split Arm Locks and Keepers and 23" Egress hinges will work with this hardware. Stops are not available. Not Shown on Exploded CCSE Sash Alignment Snubber CCSE Anti Bow Clip Tech Tip: Sash Alignment Snubber and Anit Bow Clip are for Field adjustments only. Arm/Track Kits Hardware - All Product for All Production Dates (This is a snap-on style arm/track system) Used for all production dates on Clad and All-Wood products Clad products produced from 1998 to Present All-Wood products produced from 1998 to April 2004 and All-Wood standard product from May 2004 to present Used for all production dates on Clad and All-Wood products Clad products produced from 1998 to Present All-Wood products produced from 1998 to April 2004 and All-Wood standard product from May 2004 to present Description Part No. CCSE 10" Egress Stainless Steel Hinge Arm/Track Kit (11", 15" and 23" unit widths) Includes: 10" S.S. Egress Left Hinge #098493, 10" S.S. Egress Right Hinge # " S.S. Egress Left Hinge Track #098487, 10" S.S. Egress Right Hinge Track # CCSE 14" Egress Stainless Steel Hinge Arm/Track Kit (19" unit widths and taller) Includes: 14" S.S. Egress Left Hinge #098483, 14" S.S. Egress Right Hinge # " S.S. Egress Left Hinge Track #098481, 14" S.S. Egress Right Hinge Track # CCSE 10" Egress Egard Hinge Arm/Track Kit (11", 15" and 23" unit widths) Includes: 10" Egress Left Hinge #098496, 10" Egress Right Hinge # " Egress Left Hinge Track #098487, 10" Egress Right Hinge Track # CCSE 14" Egress Egard Hinge Arm/Track Kit (19" unit widths and taller) Includes: 14" Egress Left Hinge #098485, 14" Egress Right Hinge # " Egress Left Hinge Track #098481, 14" Egress Right Hinge Track # CCSE Hurd Windows & Doors July/2009 June/2011 July/2013
17 Items ping / Miscellaneous Item No. Description Where Used Part No. Hardware / Miscellaneous 24 Frame Offset Bulb, Operating Head, Sill and Sides Applicable for all models. 33 Frame Offset Bulb, Stationary Units Starting Head, Sill and Sides L/F For DLX, Split Arm & Straight Arm Classic Sash only Large Bulb White Brown Sand From 09/17/07 to Present Not Shown on Exploded Limit Stop Arm & Bracket shown together CCSE Sash Limit Device Limit Stop Arm Limit Bracket with Stud Limit Track Complete Set ".625" See last page in catalog for Limit Device Application Limit device allows sash to open a maximum of 4". #6 x 5/8" PH PAN HD SM Screw (2) Part# " Limit Track 6 x 3/4" PH PAN HD SM Screw Part# (4) CSE Window Opening Control Device Includes Arm, Track &Track Assemblies R Tech Tip: Required on 2767, 3159 and Available as an accessory for other sizes. Aluminum Structural Nail Fin Applicable for all models. Limit Stop Arm Head, Sill and Sides of Frame. Bracket w/ Stud RH Limit Device L 12'-0 L/F White Painted, pre-fab With Pre-punched Holes 20'-0 L/F - White Painted, NO Pre-Punched Holes Interior Face of Nail Fin LH Limit Device Use #6 x 1/2" Self Drilling PH PANHD SM Steel Screw to apply Nail Fin 2" from Each Corner and 8-10" On Center Therafter. Use SM 5731 Silicone to attach Nail Fin Sash Lift Block - Beige Bottom of sash. For Encore and DLX Frame Lift Block - Clear Top of Aluminum Sill. For Encore and DLX C Hinge Shim Service item - installed between bottom hinge and sash or bottom track and frame. Service Item Nailing Fin Corner Pad Set of Four For all frames using nailing fin. July/2009, March/2010 July/2013, Aug/ Hurd Windows & Doors CCSE-16
18 Hardware / Miscellaneous 2 Piece Surround Field Note: Please order surround end cap & bulb weatherstrip as separate parts. Items ping / Miscellaneous Item No. Description Where Used Part No. See Page CCSE-3 Cross Section Surround End Cap For Encore & DLX Energy Saver Sash 9/19/05 to 9/17/2007 (see below) White Brown Sand 11 CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap CCSE Energy Saver Surround End Cap L/F Energy Saver Sash 09/19/05 to 09/17/2007 Shown Reference: For Encore & DLX Energy Saver Sash purchased from 08/2/04 to 09/17/2007 Replace with Energy Saver Surround End Cap Use 2 Piece Surround Field Replacement parts. Note: Part s include both Surround End Cap & Sash Install 1st Install #29 Sash 2nd Surround End Cap Shown Installed For Encore & DLX Energy Saver Sash purchased from 08/19/02 to 08/2/2004 Replace with #29 for replacement Sash #29 For Encore & DLX Energy Saver Sash0 8/19/02 to 08/2/2004 (see above) & Sash Mfg. From 09/17/2007 to Present Sash Tall Bulb From 09/17/07 to Present For Sash: Head, Side & Sill White Brown Sand 11 CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE L/F Sash Mfg. From 07/17/2007 to Present Shown Uses Sash Bulb Only L/F 1/16" x 5/16" CCSE Acrylic Black Tape CCSE Hurd Windows & Doors Jult/2009
19 25 Items Vinyl Nail Fin Item No. Description Part No. Sill Vinyl Folding Nailing Fin Hardware / Miscellaneous 11 CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE L/F /4" Flexible Vinyl Sill Nailing Fin FLEX JOINT 1/16" 1 1/2" INTERIOR FACE 26 Head & Side Vinyl Nailing Fin 11 CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE CCSE L/F /16" 7/16" 1/16" 1 1/2" 5/16" INTERIOR FACE Jult/ Hurd Windows & Doors CCSE-18
20 Sash Assembly Sash will be shipped as common air product, unless specified differently. No part numbers are needed to order. Common air means that the space between the glass is always the same. Glass thicknesses change depending on the size and specifics about the glass to be installed in to the frame. Normally glass up to 12.9 square feet will have an over all glass depth of 3/4". Glass from 13 square feet to 19.9 square feet will have an over all glass depth of 13/16". Glass from 20 square feet to 36 square feet will have an over all glass depth of 61/64". Tempering or specialty glass will change the depth of the over all glass unit. When ordering Replacement Sash Assembly for Stationary or Operating Windows please include the following information: EXTERIOR: Clad Color PRODUCT TYPE: Glass depth or specify what type of interior glazing bead is on the outside GLASS TYPE REQUESTED: Single Strength, Low-E, Climate Control or Super Sunblocker, etc. Note: If special glass is needed (tinted, GIAS, obscure, tempered or CHDL) please be specific. GLASS SIZE: See Page CCSE-4 & CCSE-20 For Formulas (ACTUAL OR DAYLIGHT OPENING): State which dimension is specified; width first, then height. GLASS DEPTH: 1" or 3/4" HINGING: State if Operating Left or Right or Stationary GLASS IDENTIFICATION CODE / YEAR OF MANUFACTURE: Note: Glass codes can be found on the bottom left hand corner of the glass as viewed from the interior of your sash, see Illustrations below. TYPE OF OPERATOR STYLE: (Encore; DLX; Split Arm or Straight Arm etc.) Note: Custom color sash and specialty glass prices are available through HURD Quote Department. Operating Sash Glass Sizes All Sash Glass Codes I.D. 11x11 11x15 11x19 11x23 11x27 11x31 11x35 11x43 11x47 11x55 11x59* 11x67* 15x11 15x15 15x19 15x23 15x27 15x31 15x35 15x43 15x47 15x55 15x59 15x67 19x11 19x15 19x19 19x23 19x27 19x31 19x35 19x43 19x47 19x55 19x59 19x67 23x11 23x15 23x19 23x23 23x27 23x31 23x35 23x43 23x47 23x55 23x59 23x67 27x11 27x15 27x19 27x23 27x27 27x31 27x35 27x43 27x47 27x55 27x59 27x67 31x11 31x15 31x19 31x23 31x27 31x31 31x35 31x43 31x47 31x55 31x59 31x67* Identification Code Effective October 1, June 1, This will be stamped in black ink on the spacer bar that separates the glass as shown in Illustration #1. Spacer Bar U274 AHA Illustration #1 Glass ID Glass Please see separate Hurd Glass Code Identification Document provided by your Distributor, for a complete list of definitions of your glass identification codes. Identification Code Effective June 1, 2002 to Present Will be laser etched on the # 3 surface of the glass. With exception of non-rectangular shapes, that will be etched on the spacer bar as shown Illustration #2. Spacer SURFACE Bar SURFACE #2 #1 SURFACE SURFACE #3 #4 Glass #2 #1 #4 #3 U274 AHA *Glass must be tempered. Stationary Sash Glass Sizes can be Found on CCSE-21 Glass ID Location Glass Surface #3 Illustration #2 CCSE Hurd Windows & Doors July/2009
21 Stationary Picture Sash N Frame Section Details Stationary Picture Sash Formulas: Day Light Opening Width = Basic Unit Width " Day Light Opening Width = Glass -.875" Glass Width = Basic Unit Width " Sash Width = Basic Unit Width " Sash Width = Glass " 29 Sash 33 Frame VERTICAL VIEW Day Light Opening Height = Basic Unit Height " Day Light Opening Height = Glass Height -.875" Glass Height = Basic Unit Height " Sash Height = Basic Unit Height " Sash Height = Glass Height " Exterior Please note: For Ordering Frame Only, Please provide Basic Unit Height & Basic Unit Width OR Glass Height & Glass Width when ordering. SASH HEIGHT 32 Glazing Bead Interior 30 Glass DAY LIGHT OPENING HEIGHT ACTUAL GLASS HEIGHT BASIC UNIT HEIGHT Item Page 29. CCSE CCSE CCSE CCSE Glazing Bead See Page CCSE-2 for Parts List HORIZONTAL VIEW 29 Sash BASIC UNIT WIDTH DAY LIGHT OPENING WIDTH ACTUAL GLASS WIDTH 33 Frame 33 Frame Interior 30 Glass 32 Glazing Bead 32 Glazing Bead 29 Sash Exterior SASH WIDTH 33 Frame 29 Sash July/2009 July/ Hurd Windows & Doors CCSE-20
22 Sash Exploded View for Stationary Picture Sash N Frame Picture Sash Glass Sizes 35x11 35x15 35x19 35x23 35x27 35x31 35x35 35x43 35x47 35x55 35x59 35x67 55x11 55x15 55x19 55x23 55x27 55x31 55x35 55x43 55x47 55x55 55x59 55x Bulb 29. Bulb 30. Glass 43x11 43x15 43x19 43x23 43x27 43x31 43x35 43x43 43x47 43x55 43x59 43x67 59x11 59x15 59x19 59x23 59x27 59x31 59x35 59x43 59x47 59x55 59x59 59x Sash/Glass Glazing Bead 47x11 47x15 47x19 47x23 47x27 47x31 47x35 47x43 47x47 47x55 47x59 47x67 67x11 67x15 67x19 67x23 67x27 67x31* 67x35 67x43 67x47 67x55 67x59 67x Bulb Complete Sash Please note: For Complete Sash, please provide Basic Unit Height & Basic Unit Width OR Glass Height & Glass Width when ordering. See Page CCSE-19. Item Page 29. CCSE CCSE CCSE-22 GLASS ID CODE 32. Sash/Glass Glazing Bead Note: Operating Sash Exploded View can be seen on Page CCSE-3. CCSE Hurd Windows & Doors July/2009 July/2013
23 Glazing Beads & Prior Item No. Description Part No. Glazing Beads Not Shown on Exploded 3MM Glass L/F MM Glass L/F MM Glass L/F " 0.718" Used on 3MM GLASS 0.531" 0.718" Used on 4MM GLASS 0.718" 0.391" Used on 6MM GLASS Glazing Beads to Present Item No. Description Part No MM & 4MM Glass 11 Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size L/F " 0.516" 6MM Glass 11 Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size Glass Size L/F " 0.344" July/ Hurd Windows & Doors CCSE-22
24 Item No. Description Glass Size Part No. 31. Screens, w/lift Rail 01/1998 to Present White Gold 03 Bronze 11 CCSE Screen x x x x x x x x White Gold 03 Bronze 15 CCSE Screen x x x x x x x x x x White Gold 03 Bronze 19 CCSE Screen x N/A x x x x x x x x x SCREEN WIDTH GLASS WIDTH " (1 7/16") 2.500" TYP " 0.390" TYP x Screen Spring White Gold 03 Bronze Replacement Part 23 CCSE Screen x x Qty (2) Each Screen x x x x x x x White Gold 03 Bronze 27 CCSE Screen x x x x x x x x White Gold 03 Bronze 31 CCSE Screen x N/A x x x x x x x SCREEN HEIGHT GLASS HEIGHT " (3/8") Note: For screens with lift tabs, please specify screen width and screen height. CCSE Hurd Windows & Doors July/2009
25 Screens w/plunger From 1998 & Prior Item No. Description Glass Size Part No. Not Shown on Exploded White Gold 11 CSE Screen x x x x x x x x White Gold 15 CSE Screen x N/A x N/A N/A x x x x x x x x White Gold 19 CSE Screen x N/A N/A x x N/A N/A x x x x x x x x White Gold 23 CSE Screen x N/A N/A x x x x x x x x White Gold 27 CSE Screen x x x x x x x x White Gold 31 CSE Screen x N/A N/A x x x x x x x SCREEN HEIGHT GLASS HEIGHT " (3/8") SCREEN WIDTH GLASS WIDTH " (1 7/16") Tech Tip: Plunger style screens will fit all Casement windows, regardless of manufacture date. Lift Rail type screens are not interchangeable with Plunger style screens made 1998 to Prior. CSE White Spring Screen Cap Part# CSE Black Spring Screen Cap Part# CSE Screen Spring Part# Screen Plunger Part# July/ Hurd Windows & Doors CCSE-24
26 Glass, 02/18/03 & Prior Glazing Beads can be Found on CCSE x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 19 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 19 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass * Glass must be tempered. Glazing Tape 1/16" x 1/2" Black Foam Glazing Tape (200' Per Roll) 1/16" x 1/2" Roll of Black Foam Glazing Tape Replacement Glass for Units Manufactured BEFORE February 19, x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 19 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 19 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass L/F Roll 1" Insulating Glass 1" Low-E Insulating Glass Part# Part# Part# Part# 31 x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass CCSE Hurd Windows & Doors July/2009
27 Item No x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass * x 67 Glass * x 19 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass Glazing Tape 1/16" x 1/2" Black Foam Glazing Tape (200' Per Roll) 1/16" x 1/2" Roll of Black Foam Glazing Tape 31 x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass * x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 31 Glass x 35 Glass x 43 Glass x 31 Glass x 35 Glass Glass, 02/19/03 to Present L/F Roll Replacement Glass for Units Manufactured AFTER February 19, x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass * x 67 Glass * x 19 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass Glazing Beads can be Found on CCSE-22. 3MM Insulating Glass 3MM Low-E Insulating Glass Part# Part# Part# Part# 31 x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass * x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 31 Glass x 35 Glass x 43 Glass x 31 Glass x 35 Glass x 19 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 31 Glass x 31 Glass * x 19 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 31 Glass x 31 Glass x 31 Glass * x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 23 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 27 Glass x 31 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass * Glass must be tempered. July/ Hurd Windows & Doors CCSE-26
28 Picture Glass, 02/18/03 to Present Glazing Tape 1/16" x 1/2" Black Foam Glazing Tape (200' Per Roll) 1/16" x 1/2" Roll of Black Foam Glazing Tape L/F Roll Item No. 30. Replacement Glass for Units Manufactured AFTER February 19, MM Insulating Glass Part# 35 x 55 Glass x 59 Glass x 67 Glass Standard 6MM Low-E Insulating Glass Part# 35 x 55 Glass x 59 Glass x 67 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass x 35 Glass x 43 Glass x 47 Glass x 55 Glass x 59 Glass x 67 Glass Glazing Beads can be Found on CCSE-22. CCSE Hurd Windows & Doors July/2009
29 Grille Parts Description Where Used Part No. KD NOTE: THE FOLLOWING PRODUCTS ARE ONLY AVAILABLE IN KD WITH SLIDE PINS. 5/8" Single Slide Pin Part# TRADITIONAL Single Profile Grilles FOR CIRCLE TOP UNITS 033B 5/8" Slide Pin Part# TRADITIONAL Double Profile 026 7/8" Slide Pin Part# REGAL Double Profile 028 1" Single Slide Pin Part# REGAL Single Profile Grilles FOR CIRCLE TOP UNITS 028B 1-7/16" Slide Pin Part # SUPER REGAL Profile Prior to 05/07/ T-Route Pin (Elliptical) Part# TRADITIONAL/REGAL Double/Single Profile Grilles FOR ELLIPSE UNITS 034G Concealed KD Clip Part# REGAL/TRADITIONAL Single Profile Grilles FOR RECTANGLE WINDOW UNITS: CLASSIC CSE PRODUCTS PRIOR TO 04/29/02 & DIRECT SET Plastic Spring Fastener Part# July/ Hurd Windows & Doors CCSE-28
30 Grille Parts Description Where Used Part No. SURROUNDS Grille Push Pin Part# REGAL/TRADITIONAL Single/Double Profile Grilles For Direct Set & Circle Top Units 014 Grille Grommet Part# REGAL/TRADITIONAL Single/Double Profile Grilles For Direct Set & Circle Top Units 016 Snap-In Full Surround Grille Clip Part# REGAL/TRADITIONAL Single Profile Grilles TAPE GLAZED UNITS (EFFECTIVE ) 1212 SNAP-IN TAPE GLAZE GRILLE CLIP REGAL/TRADITIONAL SINGLE/DOUBLE PROFILE (REPLACED WITH ABOVE CLIP ) Snap-In Putty Glaze Grille Clip Part# REGAL/TRADITIONAL Single Profile Grilles FOR PUTTY GLAZED UNITS (EFFECTIVE ) 1213 SNAP-IN PUTTY GLAZE GRILLE CLIP REGAL/TRADITIONAL SINGLE/DOUBLE PROFILE (REPLACED WITH ABOVE CLIP ) Snap-In Full Surround Grille Clip Part# GRILLES FOR BUILDERS, ENERGY SAVER 1203 FRICTION FIT (OBSOLETE AS OF ) CCSE Hurd Windows & Doors July/2009, Dec/ /2014 Revision: Part # is now , still works with Grommet
Casement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
More informationSECTION REFERENCE. Tilt-Wash Double-Hung. Insert Windows. 400 Series
SECTION REFERENCE Size Ranges... 96 Existing Window Measurements... 96 Divided Light Patterns... 97 Window Details... 97 Joining Details... 97 Performance Data... 269 400 Series Windows TILT-WASH DOUBLE-HUNG
More informationFlexivent Windows (1952 to 1979)
Flexivent Windows (1952 to 1979) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
More informationINSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS
2009 Pella Corporation INSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS Part Number: 80WH0100 Installation Instructions for Typical Wood Frame Construction.
More informationAndersen Clad Inswing Entry Doors (2001 to Present)
Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts
More informationGarden Windows Builders Vinyl
TABLE OF CONTENTS Specifications... 8-2 QuickSpecGuide... 8-3 Elevations/Sizes: 1/4 Scale GardenUnits... 8-4 Grille Patterns... 8-5 SectionDetails: 6 Scale... 8-6 December 2008 JELD-WEN reserves the right
More informationParts & Service Guide.
service. Parts & Service Guide. www.allsco.com Casement/Awning Hardware Brackets...Starting on Page 1 Roto Frank Awning Bracket Roto Frank Face Mount Bracket truth Brackets 1 truth Brackets 2 truth Brackets
More informationCombination & Screen Doors
Combination & Screen Doors www.bbwood.com WOOD SCREEN DOORS Removable Screens (RS) SPECIFICATIONS: Stiles and Top Rail 2-9/16 Cross Rails Bottom Rail Vertical Mull 7/8 #206 #201 58-RS 764-RS V52-RS 2 2
More informationGuide to Ordering Hurd Replacement Glass, Sash, or Window & Door Parts
Guide to Ordering urd Replacement, Sash, or indow & Door Parts If you have this form in hand, you are in need of a replacement part for your urd window or door. And, your first question is likely, how
More informationWindow Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
More informationSun Windows General Information Sun New Construction Window Installation Instructions
Sun Windows General Information Section 1 G F H H H A. Apply Weather Resistive Barrier B. Apply Sill Flashing Tape C. Place Waterproof Sill Shims D. Caulk Back of Nail Fin Sides & Top, Set Window, Fasten
More informationWINDOW REPAIR MANUAL & REFERENCE GUIDE
WINDOW REPAIR MANUAL & REFERENCE GUIDE TABLE OF CONTENTS DOUBLE HUNG & SINGLE HUNG PARTS 4-5 CASEMENT PARTS 6 SCREEN PARTS 7-8 HOW TO REMOVE TILT-IN SASH 9 HOW TO REMOVE A BALANCE 10 HOW TO INSTALL BALANCE
More informationSash Replacement Guide
for Andersen 200/400 Series Awning Windows Read all instructions carefully before attempting this procedure. If you have any questions about your ability to complete this procedure, call Andersen at 1-888-888-7020
More informationINSTALLATION INSTRUCTIONS for Premium Pocket Windows (JII022) IMPoRtaNt INFoRMatIoN & glossary. safety & HaNdlINg
Thank you for selecting JeLd-weN products. Attached are JeLd-weN s recommended installation instructions for pocket (replacement) double-hung, casement, awning, picture or transom windows, designed to
More informationInformation Technology Solutions
Information Technology Solutions Aluminum Sliding Door Assembly Instructions Shield Doors & Windows Bi-fold Door Assembly Instructions For Support Please Call 03 8339 2252 Aluminum Sliding Door Assembly
More informationInstallation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows
Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows americancraftsmanwindows.com Project Requirements: Read
More informationActive and Passive Sash Replacement
for Andersen Gliding Windows Read all instructions carefully before attempting this procedure. If you have any questions about your ability to complete the procedure, call Andersen at 1-888-888-7020 for
More informationImportant Information for Installer & Homeowner
Important Information for Installer & Homeowner Homeowner: Please keep this information for your records, do not discard! Installation Instructions for Wood Frame Construction Replacement (See other side
More informationWindow Replacement Hardware
Face Mounted Casement Operators TRUTH'S SINGLE ARM CASEMENT OPERATORS - FRONT MOUNT Arm Length ("A") Roller 36-323-8 Shown 7-1/2" Chestnut Bronze Stainless Steel 36-324-8 Opposite 7-1/2" Chestnut Bronze
More informationPERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Buffalo Forge Steel Doors / Round Top Single PRODUCT TYPE: In-swing Round Top Single Door RH-4 Title Uniform Load Deflection Test
More informationDE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationInstallation Instructions and Ordering Information
The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using
More informationSierra Pacific Windows
Sierra Pacific Windows Bi-Fold Windows & Doors Sierra Pacific Bi-fold Windows and Doors glide smoothly to create large openings that transform your living spaces. With panels folding and stacking either
More informationReachout Lock Replacement for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors
for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors Thank you for choosing Andersen. For questions call 1-888-888-7020. For more information
More informationVinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows
Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Viewed from the exterior. IMPORTANT: Please read before you begin installation. TABLE OF CONTENTS AND TOOL / MATERIAL
More informationReplacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin
Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin americancraftsmanwindows.com Project Requirements: Failure to follow these instructions may void product
More informationTundra Series Windows January 2016
Tundra Series Windows January 2016 New Construction Installation Instructions Nail Fin, J-Fin and Brickmold Aplications product. ATTENTION! Read and understand all installation instructions before installing
More informationWINDOW INSTALLATION GUIDE
WINDOW INSTALLATION GUIDE is not responsible for or liable for any use or misuse of the information contained in this window installation guide. Window Installation Guide This guide provides basic information
More informationHALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
More informationBarewood Octagon and Elongated Windows Installation Instructions
Step-by-step instructions to a beautiful window. Measuring and Installation of your new window from Century Specialty Windows couldn't be easier with our step-by-step instructions. Quality, function and
More informationQuality Windows And Doors. Great Service. Exceptional Value.
Quality Windows And Doors. Great Service. Exceptional Value. As A Matter Of Fact, Our Windows And Doors Are The Best. Since 1985 North Star has been an industry leader in the manufacture of attractive
More informationSECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
More informationBasement Window Installation Guide Hopper and Sliding
Basement Window Installation Guide Hopper and Sliding americancraftsmanwindows.com Project Requirements: Installation must comply with all applicable building codes. Existing window frame, wall and weatherresistant
More informationStrength, Style and Security for your home and family
Strength, Style and Security for your home and family NEW and IMPROVED DOORS 2013 John Cannon Homes, Inc. The Amarina Why Sentinel Impact Resistant Windows and Doors? Sentinel by CGI has received the prestigious
More informationClad Direct Glaze Window Installation Instructions
Clad Direct Glaze Window Installation Instructions Sill flashing and sealing: 2. An overview of the proper flashing sequence is shown in figure 1. Please read entire installation instructions carefully
More informationTechnical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
More informationIntroduction...COMB-2 Design Considerations and Examples...COMB-3
SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant
More informationGlossary. 1/3 1/3 1/3 - Configuration of a vent-fixed-vent (xox) window in which the vents and fixed panel are equal sizes
Glossary 1/3 1/3 1/3 - Configuration of a vent-fixed-vent (xox) window in which the vents and fixed panel are equal sizes 1/4 1/2 1/4 - Configuration of a vent-fixed-vent (xox) window in which the vents
More informationSidelights & Transoms for A-Series Hinged Doors
Sidelights & Transoms for A-Series Hinged Doors Parts Catalog Main Menu Section TOC Search What s in This Section Sidelights & Transoms............................................. Page 3 Parts Illustration...........................................................
More informationEnhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection. NORTH STAR PATIO DOOR COLLECTION Two-Panel Three-Panel Four-Panel
Enhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection. NORTH STAR PATIO DOOR COLLECTION Two-Panel Three-Panel Four-Panel Since 1985 North Star has been an industry leader in the
More informationWe urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.
Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden
More informationvinyl replacement windows LOOKING FOR VINYL REPLACEMENT WINDOWS? Standard Features easy, trouble-free operation. window material formulated and
vinyl replacement windows LOOKING FOR VINYL REPLACEMENT WINDOWS? We are confident that we carry a style and size to suit your application. You can be sure that your investment will add value to your home,
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationCare and Operation of Your New Windows
Care and Operation of Your New Windows Congratulations Alside Windows feature the trademarks of exceptional window design unsurpassed quality, functional beauty and maintenance freedom. We believe your
More informationAccessory Windows. Replacement and New Construction
Accessory Windows Replacement and New Construction Casement Things couldn t be easier with our beautiful and functional vinyl casement windows. There s no need to stretch to reach a top lock because the
More informationIntegral Kit Instructions
Integral Kit Instructions For Fisher & Paykel Cabinet widths of 525, 635, 680, 790 mm wide For curved door Models Series B, C, D & G Manual 814980 Updated August 2008 IMPORTANT If your refrigerator has
More informationTherma-Tru Slim-Line Sliding Patio Door. Assembly and Installation
Therma-Tru Slim-Line Sliding Patio Door Assembly and Installation Read all instructions before starting. Builder or subcontractor, please forward these instructions to the homeowner. The applicable standards
More informationBrick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
More informationSECTION 08 52 00 WOOD WINDOWS (ANDERSEN ARCHITECTURAL CASEMENT AND AWNING WINDOWS)
SECTION 08 52 00 ( ) PART 1 - GENERAL SPECIFIER NOTE: DATA CONTAINED IN THIS GUIDE SPEC IS ACCURATE AS OF AUGUST 2007. DUE TO ONGOING PRODUCT CHANGES, THIS DATA MAY CHANGE OVER TIME. CONSULT MANUFACTURER
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: Atrium Companies, Inc. SERIES/MODEL: 50/305 HS PRODUCT TYPE: Vinyl Horizontal Slider
ASTM E 1886 and ASTM E 1996 TEST REPORT Rendered to: Atrium Companies, Inc. SERIES/MODEL: 50/305 HS PRODUCT TYPE: Vinyl Horizontal Slider Report No.: Test Date: 5/21/07 Through: 5/23/07 Report Date: 5/30/07
More information450 SERIES SLIDING GLASS DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS
450 SERIES SLIDING GLASS DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS Effective 2/12/11 Revised 7/7/15 TACOMA, WA (253) 922-6030 PORTLAND, OR (503) 682-3270 MARYSVILLE, WA (360) 659-0836 SACRAMENTO, CA
More informationK. D. FRAME ASSEMBLY FOR CLOSED STEEL STUD WALLS...Ins 10. FRAME INSTALLATION DETAILS FOR CLOSED STEEL STUD WALLS...Ins 11
K. D. FRAME ASSEMBLY FOR MASONRY WALLS...........................Ins 2 FRAME INSTALLATION DETAILS FOR MASONRY WALLS......................Ins 3 INSTALLING EXISTING MASONRY WALL ANCHORS IN FRAME..................Ins
More informationInstallation Guide for Andersen Architectural Clad Outswing Commercial Doors
Installation Guide for Andersen Architectural Clad Outswing Commercial Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance
More informationDIY CABINET REFACING INSTALLATION GUIDE
DIY CABINET REFACING INSTALLATION GUIDE CABINET REFACING INSTALLATION Are you ready to reface your outdated cabinets? This guide will show you how to install your new Facelifters Cabinet Refacing Products
More informationSash or Balancer Replacement Guide
or Replacement Guide for Andersen 200 Series Tilt-Wash Double-Hung Windows or Replacement Guide Read all instructions carefully before attempting this procedure. If you have any questions about your ability
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationInstallation Guide for Andersen Architectural Wood Inswing Entry Doors
Installation Guide for Andersen Architectural Wood Inswing Entry Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are
More informationChapter 10 - Scaffolding Systems
Chapter 10 - Scaffolding Systems Contents Chapter 10 - Scaffolding Systems... 10-1 Check and Oil the Pump Jacks... 10-4 Set Pump Jack Brackets... Error! Bookmark not defined. Set Pump Jack Poles... 10-5
More informationTuscany Series Vinyl Replacement Windows 3-Part Specification
PART 1 - GENERAL SECTION 08 53 13 (Masterformat 2004 Edition) VINYL WINDOWS Tuscany is optimized for replacement applications but since it is available in multiple frame styles including nail-on fin frame,
More informationWINDOW INSTALLATION GUIDE FOR NEW CONSTRUCTION - WOOD FRAMING
WINDOW INSTALLATION GUIDE FOR NEW CONSTRUCTION - WOOD FRAMING IMPORTANT NOTICES AND INFORMATION Read these instructions in their entirety prior to installing windows. Any local building code requirements
More informationReplacement Installation Instructions
Sliding Door Replacement Installation Instructions Please make sure you have: Fixed 1 - Operating (X) Panel (Glazing Bead Inside, Roller Adjustment Holes Outside) 1 - Fixed (O) Panel (For 3-Panel doors,
More informationCity of San Diego, CWP Guidelines
PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,
More informationBest Barns USA Assembly Book
Best Barns USA Assembly Book Revised November 27, 2013 the Easton - R 12'x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
More informationQuality Building Products for over 50 Years
Light Commercial Quality Building Products for over 50 Years Harvey Building Products is a leading manufacturer and distributor of high quality building products. We manufacture a complete line of superior
More informationA Complete Solution CREATING WALLS THAT DEFINE SPACE
A Complete Solution CREATING WALLS THAT DEFINE SPACE COMPANY HISTORY CLIPPER WALL Clipper partitions are part of the Saint- Gobain Group, one of the worldwide leaders in the construction products industry.
More informationHürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner
More informationGarden Window. Montecito Series Vinyl Garden Window Architectural Manual
Montecito Series Vinyl The offers the outstanding insulating properties, low maintenance, and contemporary aesthetic appeal only vinyl can provide. Available in White and Tan homogenous window frames,
More informationCLAIM FORM APPENDIX. I. Photographs Identifying The Windows
CLAIM FORM APPENDIX I. Photographs Identifying The Windows The Settlement provides compensation for MIWD Products that are glazed with Glazing Tape and were manufactured or sold between July 1, 2000 and
More informationCall for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
More informationWINDOW PANNING AND TRIMS
OCTOBER, 2010 PANNING AND TRIMS GENERAL INFORMATION 1 EXTERIOR PANNING Panning is primarily used to cover the perimeters of existing building openings prior to the installation of replacement windows.
More informationImagine. the transformations that are possible! Add Style & Value to Your Home Cut Energy Costs Drastically Reduce Upkeep
Imagine the transformations that are possible! Add Style & Value to Your Home Cut Energy Costs Drastically Reduce Upkeep Let the world see your home as yours alone, renovated to suit your mood, your desire,
More informationSERIES 238 WINDOWS. NOTE: Read instructions completely before attempting any installation.
1 Installation Instructions SERIES 238 WINDOWS Page 2: Page 3-4: Page 5: Page 6: Page 7: Opening Preparation and Wood Buck Installation Installation Instructions for Series 238 WINDOWS Figure 1: Buck preparation
More informationEnhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection.
Enhancing The Beauty And Value f Your Home. Exclusive Patio Door Collection. Since 1985 North Star has been an industry leader in the manufacture of attractive and energy-efficient vinyl windows and patio
More informationDESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 8 DOORS AND WINDOWS 08 50 00 WINDOWS
SECTION INCLUDES Metal Windows Vinyl/Aluminum Clad Wood Windows Solid Fiberglass and Vinyl Windows Wood Windows (Historic Preservation only) RELATED SECTIONS 02 83 00 Lead Paint Remediation 06 10 00 Rough
More informationn Three 4 x 4 butt hinges per door - prevents wracking and assures smooth positive operation n Heavy duty 16 gauge steel frame
Weather Fin and bulb help keep bad weather outside and good air inside Windows: n Many light kits are available 1-LU 4 X 48 1-LE 16 X 16 1-LA 20 X 24 1-LI 20 X 24 1-B 22 X 36 1-LW 16 X 16 W/GRID 9-LB 22
More informationHOW TO... Channel Window Balances
Take Out Clips Open HOW TO... Channel Window Balances Used On Single Or Double Hung Sash Balance Shown Installed In Jamb With Sash Removed Remove the sash stops. Close sash to expose take-out clips. Open
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows without Nailing Fin (JII011) ImPOrTANT INFOrmATION & GlOssAry. rough OPeNINGs
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for vinyl windows without a nailing fin (including finless, flush fin and flange). Read these instructions
More informationSECTION 08560 SERIES 1500 VINYL PATIO DOORS
SERIES 1500 VINYL PATIO DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Patio Doors 1.2 RELATED SECTIONS A. Section 05450: Cold Formed Metal Framing. B. Section 06100: Rough Carpentry. C. Section 06200: Finish
More informationINSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
More informationTEST REPORT. Rendered to: INTERNATIONAL WINDOW Hayward, California. PRODUCT TYPE: Aluminum Hopper SERIES/MODEL: 7222
Architectural Testing TEST REPORT Report No.: C2375.01-301-44 Rendered to: INTERNATIONAL WINDOW Hayward, California PRODUCT TYPE: Aluminum Hopper SERIES/MODEL: 7222 SPECIFICATIONS: AAMA/WDMA/CSA 101/I.S.2/A440-05,
More informationAndersen Electric Window Opener for Andersen Awning and Roof Windows
W A Electric Window Opener Electric Window Opener for Awning and Roof Windows Congratulations! You have just purchased one of the many fine products. For ease of installation and continued enjoyment of
More informationRAM Industries 8600 Commerce Park Dr Houston, TX 77036 Tel: 281-495-9056 Fax: 281-495-6778 www.ramwindows.com
SERIES 900 CASEMENT WINDOW Page 1 of 6 RAM Industries 8600 Commerce Park Dr Houston, TX 77036 Tel: 281-495-9056 Fax: 281-495-6778 www.ramwindows.com SPECIFICATION GUIDE SERIES 900 CASEMENT WINDOW RAM Industries
More informationReflections 5500. Vinyl Replacement Windows Reflections
Reflections 5500 Vinyl Replacement Windows Reflections 5500 Be greeted by an inspiring splash of sunlight. Be greeted by a symphony of style. Be greeted by an energy bill that makes you want to sing. What
More informationAutomatic Door Selection Guide
Automatic Door Selection Guide AAADM 1300 Sumner Avenue Cleveland, OH 44115 P: 216-241-7333 F: 216-241-0105 aaadm@aaadm.com Automatic Door Selection Guide General: The members of AAADM manufacture an assortment
More informationIMPORTANT! READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION. Step 1:
IMPORTANT! READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION. Thank you for purchasing your new replacement windows from Great Lakes Window. The following instructions will help remove the old windows
More informationAn ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks
An ASSA ABLOY Group brand 4800LN Series Interconnected Locks performance meets style introduction The Yale 4800LN series interconnected locksets combine our key-in-lever locksets with the added safety
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More information2.02. Specifications. General. Products. Execution. Offset Pivots P-694 Top and Bottom Pivots
2.02 Standard Specifications General Entrances Description Furnish all necessary materials, labor and equipment for the complete installation of aluminum entrance doors, door frames and hardware as shown
More information1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS
By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool
More informationOVEN PARTS For Models:RBS305PDB16, RBS305PDQ16, RBS305PDT16, RBS305PDS16 (Black) (Designer White) (Biscuit) (S.Steel)
OVEN PARTS 30" BUILT IN ELECTRIC OVEN SELF CLEAN 10 04 Litho in U.S.A.(cre) 1 Part No. OVEN PARTS 1 Literature Parts LIT8300654 Installation Instructions LIT8300772 Use & Care Guide (Oven) LIT8301758 Tech
More informationPRODUCT GUIDE Vinyl Patio Doors (JPG008)
This guide contains procedures for common user serviceable repair tasks found on vinyl patio doors. If a condition arises that is not covered in this guide, please contact us for professional help. This
More information170 Sliding Patio Door available Styles
170 Sliding Patio Door available Styles A-171 OXO Continuous Frame Continuous Frame Transom Sidelite A-172 XO OX A-173 XOO OOX A-175 OXXO Manufacturer of Alpine Window Products 170 Sliding Patio Door Component
More informationHorizontal Mini Blinds Installation Guide
Horizontal Mini Blinds Installation Guide We make it easy! BTG 468298 EN_ rev0614 For more safety information: 1-866-662-0666 or.www.healthcanada.gc.ca/blindcords Before starting Your new Blinds To Go
More informationFRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs.
FRAME PROFILE MASONRY FLUSH MASONRY KD MITER CORNER JOINT Bend Tabs Head #8 Screw (MS002485) Required on all fire rated KD frames Corner Assembly 2" (50.8) Head Jamb Head Break Away Corner Clip Spot Welds
More informationCombination Unit 5'6" Windows a i o P t
for Andersen 5'6" Double-Hung Venting s Windows a i o P t o rs D o Congratulations You have just purchased one of the many fine Andersen products. For ease of assembly and installation and continued enjoyment
More information941 Key Street HPO File No. 140817 CERTIFICATE OF APPROPRIATENESS
Application Date: August 6, 2014 Applicant: Mary S Beaver, owner CERTIFICATE OF APPROPRIATENESS Property:, lot 10, block 220, East Subdivision. The property includes a historic 1,200 square foot one story
More informationPOWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents
-J0 REV. 00--0 POWER LOCK KIT GENERAL Kit Number -0, 0-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com (English
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More information