Nugget 120, Valve Islands V14 Series
|
|
|
- Dinah Parrish
- 7 years ago
- Views:
Transcription
1 V Series 5/2 and 5/3 Valves with Wireway Ø8, G 1 4 Multipole for easy installation onforms to international standards Power saving and diagnostic features From V up to 240V supply Fieldbus compatible Dedicated S-Interface models Technical Data Wireway Indication by red LED (d.c.) or neon (a.c.) Suppression by flywheel diode (d.c.) or VDR (a.c.) : Red LED = correct movement of armature Orange LED = failed operation 50% power saving following correct armature movement Multipole: D-sub connector, IP40 Round type plug, IP5 onduit entry type, IP5/NEM 4 Temperature Range: -20 to +50 *onsult our Technical Service for use below +2 Materials Glass fibre reinforced co-polymer moulding for wireway housings and modules. onduit end caps zinc pressure die-cast. Glass fibre reinforced co-polymer manifolds. luminium alloy end plates and aluminium alloy pressure die-cast sub base modules. Ordering Information To order, quote model number and voltage code of Sub-base and Wireway, e.g. V-XXX3 is a station single pressure, side ported Sub-base with conduit Wireway connector to IP5/NEM 4 for use at 24 V d.c. with diagnostic Multipole. Valves and accessories can be ordered separately or consult our Technical Service for a ready built system. For further technical data on valves, bases and accessories refer to Section N/UK
2 General Information 5/2 and 5/3 Solenoid ctuated Valves Symbol Model Manual Pilot Supply Operator Mid- Return Operating Pilot Weight Spares kit Override (Gasket Type) Position Pressure (bar) Pressure (bar) (kg) V51-* V51-31* Internal (W) Solenoid - Spring 1, ,155 V31-K30 V52-* V52-31* External (X) Solenoid - Spring -0,9-1,8-0,155 V31-K30 V511P-* V511P-31* Internal (W) Solenoid - Solenoid 1, ,325 V31-K30 / V522P-* V522P-31* External (X) Solenoid - Solenoid -0,9-1,2-0,325 V31-K30 V11P-* V11P-31* Internal (W) Solenoid P Solenoid 2, ,345 V31-K30 / V22P-* V22P-31* External (X) Solenoid P Solenoid -0,9-2,2-0,345 V31-K V11P-* V11P-31* Internal (W) Solenoid OE Solenoid 2, ,345 V318-K30 / V22P-* V22P-31* External (X) Solenoid OE Solenoid -0,9-2,2-0,345 V318-K30 V811P-* V811P-31* Internal (W) Solenoid OP Solenoid 2, ,345 V34-K30 / V2P-* V2P-31* External (X) Solenoid OP Solenoid -0,9-2,2-0,345 V34-K30 *Insert voltage code from table below. Gasket Type supplied with the valve, for details see section N/** P = ll Ports locked, OE = entre Open Exhaust, OP = entre Open Pressure *Voltage odes and Spare oils Voltage odes Power Inrush/Hold oil Part Number V d.c. & V 50/0Hz 1 1,5 W 4,1/2,9 V V V d.c. 2 1, W V025-24V d.c. 3 1, W V V 50/0Hz 4 4,1/2,9 V V025-48V 50/0Hz 4,1/2,9 V V V 50/0Hz 8 3,5/2,5 V V V 50/0Hz 9 3,5/2,5 V V Electrical Details for Solenoid Operators Voltage Tolerances: ±% Rating: 0% E.D. Inlet Orifice: 0,8 mm Electrical onnection: DIN Table Manual Override: V-----* V * Push button, spring return Protection lass: IP5 (DIN ) For details of connector plugs and light emitting seals see section Electrical Details for Wireway with Power Savings Voltage Features Indicator odes olour ode 24V d.c. Surge suppression LED (red) 3 Green 24V d.c. Surge suppression, diagnostic with power saver See right 3 Red 24 48V 50/0Hz Surge suppression Neon lue 1 0V 50/0Hz Surge suppression Neon 8 Yellow V 50/0Hz Surge suppression Neon 9 Orange Voltage Suppression: Indication: Power Saving: 24V d.c. Flywheel diode Red LED correct armature movement Orange LED failed armature movement 50% after armature has moved Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/UK
3 Valve Islands With IP40 D-Sub onnector With IP5 Round onnector With IP5/NEM 4 onduit onnector Single Pressure Dual Pressure Single Pressure Dual Pressure Single Pressure Dual Pressure Ported - Standard Multipole V**-XXX1 V**-**X1 V**-XXX1 V**-**X1 V**-XXX1 V**-**X1 Ported - Multipole V**-XXX3 V**-**X3 V**-XXX3 V**-**X3 V**-XXX3 V**-**X3 ottom Ported - Standard Multipole V**-XXX1 V**-**X1 V**-XXX1 V**-**X1 V**-XXX1 V**-**X1 ottom Ported - Multipole VD**-XXX3 VD**-**X3 VD**-XXX3 VD**-**X3 VD**-XXX3 VD**-**X3 Valve Islands with Dedicated S-Interface Modules With 4 Outputs With 2 Outputs / 2 Inputs With 8 Outputs With 4 Outputs / 4 Inputs Single Pressure Dual Pressure Single Pressure Dual Pressure Single Pressure Dual Pressure Single Pressure Dual Pressure Ported VG**-XXX13 VG**-**X13 ottom Ported VG**-XXX13 VG**-**X13 ccessories End Plate and Harness with IP40 D Sub- End Plate and Harness with IP5 Round End Plate and Harness with IP5/NEM 4 connector onduit onnector connector Multipole Module V51R-Q0** V51R-Q0** V51R-Q15** V08551R-Q091* Standard with Indicator V08551R-Q093 V08551R-Q0953 Positive ommon 4 Output 2 Output / 2 Input 4 Output 2 Output / 2 Input S-I Module LHS S-I Module LHS S-I Module RHS S-I Module RHS VE1S VE1S VE1S VE1S DIN-Rail DIN-Rail Mounting Kit Round onnector D-Sub onnector Pressure Regulator lock V Metre V319-K30 V0-E01 1 Metre V020-E01 1 Metre V51-Q03 Dual V0-E03 3 Metre V020-E03 3 Metre V51-Q0 Mono port 2 V0-E05 5 Metre V020-E05 5 Metre V51-Q09 Mono port 4 V0-E08 8 Metre V0-E Metre Flow Regulator lock Pressure Switch ssembly Pressure Gauge Kit for PRV lanking Gasket Set Tie Rod Kits V51-Q2201 V51-Q0 V51-Q20 Dual V040-K9 V51-QO3** M3 Wireway V51-Q Mono V51-QO4** M5 Sub-base * Insert Voltage ode. See table opposite. ** Insert number of stations stations. ( D sub up to 20, Round up to 18, onduit up to 1). ** - **= 01 to 19 to indicate position of Dual Pressure lanking Plate. V022-K0+. Identification tags: + = 0 to 9, to Z and there are three postions per station. V018-K00. lanking plugs for unused multipole module. N/UK
4 V Valves for Valve Island Mounting V5* Models 5/2 Single Solenoid Valves V5**P Models 5/2 Double Solenoid Valves G 1 / 4 G 1 / 4 30, , Manual Override /F Manual Override /F ,8 29,5 1,8 51 Note: Two stations needed V***P Models 5/3 Double Solenoid Valves G 1 / 4 30, Manual Override /F 29,5 1,8 Note: Two stations needed N/UK
5 Modular Sub-base ssemblies with IP40 D-Sub onnector Wireway for V valves,85, 15,4 Valve Island ssemblies V**-XXX1 V**-XXX3 ottom V**-XXX1 VD**-XXX3 Weight: (N x 0,1) + 0, Kg Sub-base Valve Island assemblies for 2 to 20 stations ** = 02 to 20 88, 83, 5,5 38,5 18, Right Hand '/' '/' G 1 / 4 G 3 / 8 15, 15, 20,5 1,4 24,5 13,8 5, 2 Dual Pressure Valve Island ssemblies s V**-**X1 V**-**X3 ottom V**-**X1 VD**-**X3 Sub-base Valve Island assemblies for 2 to 20 stations. Weight: (N x 0,180) + 0, Kg **-** = 01 to 19 to indicate position of Dual Pressure lanking Plate, e.g V03-0X1 indicates a station base divided into groups of 3 and. LED 39,8 Left Hand , ,0,4 13,8 (N x 20) + 8, 5,5 ports are available. hange 4th digit as shown: V**-XXX13 =ISO End Plate and Harness ssembly () Number of Stations Model Weight (Kg) 4 V51-Q004 0,4 8 V51-Q008 0, V51-Q0 0,1 1 V51-Q01 0, V51-Q020 0,229 D-sub onnector with Multipole Spacers 23,5,25 '/' G 3 / 8 29 '/' Multipole Module () V08551R-Q091 V08551R-Q093 Tie Rod Kits () V51-Q03** Weight: (N x 0,001) + 0,003 Kg V51-Q04** Weight: (N x 0,003) + 0,004 Kg For Sub-base - 2 required. ** = Number of stations in Sub-base, N = Number of stations ottom View 5, DIN-Rail Mounting Kit V319-K30 Insert Wireway ode. See Electrical Details for Wireway on page N/UK
6 Modular Sub-base ssemblies with IP5 Round onnector Wireway for V valves Valve Island ssemblies,85, 15,4 V**-XXX1 V**-XXX3 ottom V**-XXX1 VD**-XXX3 Sub-base Valve Island assemblies for 2 to 18 stations. ** = 01 to 18 Weight: (N x 0,1) + 0,24 Kg 88, 83, 5,5 38,5 Ported Sub-base Modules Right Hand '/' '/' G 3 /8 15, 15, 20,5 1,4 24,5 13,8 5,5 2 Dual Pressure Valve Island ssemblies V**-**X1 V**-**X3 ottom V**-**X1 VD**-**X3 Sub-base Valve Island assemblies for 2 to 18 stations. Weight: (N x 0,180) + 0,24 Kg ** - **= 01 to 1 to indicate position of Dual Pressure lanking Plate, e.g V03-0X1 indicates a station base divided into groups of 3 and. 35 ports are available. hange 4th digit as shown: V**-XXX13 48,8 LED Left Hand ,5 35,0,4 13,8 (N x 20) + 8, 5,5 =ISO End Plate and Harness ssembly () Round onnector with Multipole Spacers Number of Stations Model Weight (Kg) 4 V51-Q004 0,4 8 V51-Q008 0, V51-Q0 0,1 1 V51-Q01 0, V51-Q018 0,2 23,5,25 ottom View 29 '/' '/' G 3 /8 5, Multipole Module () V08551R-Q091 V08551R-Q093 Tie Rod Kits () V51-Q03** Weight: (N x 0,001) + 0,003 Kg V51-Q04** Weight: (N x 0,003)+ 0,004 Kg For Sub-base - 2 required ** = Number of stations in Sub-base, DIN-Rail Mounting Kit V319-K30 N = Number of stations Insert Wireway ode. See Electrical Details for Wireway on page N/UK
7 Modular Sub-base with IP5/NEM 4 onduit entry Wireway for V valves,85, 15,4 Valve Island ssemblies V**-XXX1 V**-XXX3 ottom V**-XXX1 VD**-XXX3 Sub-base Valve Island assemblies for 2 to 1 stations. ** = 02 to 1 Weight: (N x 0,1) + 0,0 Kg 88, 83, 5,5 38,5 '/' '/',4 24,5 2 Dual Pressure Valve Island ssemblies V**-**X1 V**-**X3 ottom V**-**X1 VD**-**X3 M25 x 1,5 Right Hand G 1 / 4 G 3 / 8 15, 15, 20,5 1 13,8 5,5 Sub-base Valve Island assemblies for 2 to 1 stations. Weight: (N x 0,180) + 0,0 Kg **-** = 01 to 15 to indicate position of Dual Pressure lanking Plate, e.g V03-0X1 indicates a station base divided into groups of 3 and. 35 ports are available. hange 4th digit as shown: V**-XXX13 LED (N x 20) + 8, =ISO,0,4 End Plate and Harness ssembly () with onduit onnector 52, 35 Number of Stations Model Weight (Kg) 4 V51-Q1504 0,25 8 V51-Q1508 0,280 V51-Q15 0,295 1 V51-Q151 0,3 Left Hand , ,8 5,5 Multipole Module () V08551R-Q091 V08551R-Q E View of connector with cover removed Note: Maximum wire size for onduit entry connector is 2,5 mm 2. 23,5,25 ottom View '/' '/' G 3 / 8 5, Tie Rod Kits () V51-Q03** Weight: (N x 0,001) + 0,003 Kg V51-Q04** Weight: (N x 0,003) + 0,004 Kg For Sub-base - 2 required ** = Number of stations in Sub-base, 01-1 DIN-Rail Mounting Kit V319-K30 Insert Wireway ode. N = Number of stations See Electrical Details for Wireway on page N/UK
8 IP40 D-Sub onnector 25 D-Sub onnector with able Type: 25 pin IP40 D-Sub connector. able size 0,52 mm 2 Model Weight (Kg) V020 E01 1,0 m 0,2 V020 E03 3,0 m 0, V020 E05 5,0 m 1,0 Red Socket Pin no. Socket Plug Pin no. Socket Plug 1 Solenoid 1 Red Solenoid Green/red 2 Solenoid 2 lue 15 Solenoid 15 Yellow/red 3 Solenoid 3 Green 1 Solenoid 1 White/red 4 Solenoid 4 Yellow 1 Solenoid 1 Red/black 5 Solenoid 5 White 18 Solenoid 18 Red/brown Solenoid rown 19 ommon,-ve/neutral Yellow/blue Solenoid Violet 20 ommon,-ve/neutral White/blue 8 Solenoid 8 Orange ommon,-ve/neutral lue/black 9 Solenoid 9 Pink 22 ommon,-ve/neutral Orange/blue Solenoid Turquoise 23 ommon earth Yellow/green 11 Solenoid 11 Grey 24 Solenoid 19 White/green Solenoid Red/blue 25 Solenoid 20 Orange/green 13 Solenoid 13 lack Solenoid No. 1 is nearest to the connector on valve island IP5 Round onnector , F 28 Round onnector with able Type: 23 pin IP5 Round connector. able size 0,52 mm 2 Model Weight (Kg) V0 E01 1,0 m 0,340 V0 E03 3,0 m 0,40 V0 E05 5,0 m 1,0 V0 E08 8,0 m 2, V0 E m 2, Pin. Socket Plug Pin. Socket Plug Solenoid 1 Red N Solenoid 13 lack Solenoid 2 lue P Solenoid Green/red Solenoid 3 Green R Solenoid 15 Yellow/red D Solenoid 4 Yellow S Solenoid 1 White/red E Solenoid 5 White T Soelnoid 1 Red/black F Solenoid rown U Solenoid 18 Red/brown G Solenoid Violet V ommon,-ve/neutral Yellow/blue H Solenoid 8 Orange W ommon,-ve/neutral White/blue J Solenoid 9 Pink X ommon,-ve/neutral lue/black K Solenoid Turquoise Y ommon,-ve/neutral Orange/blue L Solenoid 11 Grey Z ommon earth Yellow/green M Solenoid Red/blue Solenoid No. 1 is nearest to the connector on valve island ccessories Identification Kits letters or numbers, reference V022-K0* for multipole module. *Insert letter or number, Z, 0 9. lanking Plug for Multipole Module, reference V018-K00 for sealing coil connection orifice on unwanted Multipole Module. N/UK
9 Modular Sub-base ssemblies with Dedicated S-Interface for V valves 4 Output Models Valve Island ssemblies VG**-XXX13 ottom VG**-XXX13 Ext Power S-i us Valve Island assemblies for up to 4 solenoids ** = 02 to 04. Weight: (N x 0,1) + 0,0 Kg. 4 off Mounting Holes Ø5.2 Dual Pressure Valve Island ssemblies VG**-**X13 LED's ottom VG**-**X13 Valve Island assemblies for up to 4 solenoids. Weight: (N x 0,1) + 0,0 Kg **-** = 01 to 03 to indicate position of Dual Pressure lanking Plate, e.g VG01-03X13 indicates a 4 station base divided into groups of 1 and 3. ports are available. hange 4th digit as shown: VG**-XXX13 =ISO M 4 Pin Male onnectors 23,5, '/' G 3 /8 29 '/' 4 Output LHS S-I Module () VE1S Multipole Module () V08551R-Q0913 0,180 Kg Tie Rod Kits () V51-Q03** Weight: (N x 0,001) + 0,003 Kg V51-Q04** Weight: (N x 0,003) + 0,004 Kg For Sub-base - 2 required ** = Number of stations in Sub-base, 01-1 ottom View 5, DIN-Rail Mounting Kit V319-K30 See Electrical Details for Wireway on page For details of associated S-Interface products see Section.4.0. N = Number of stations N/UK
10 Modular Sub-base ssemblies with Dedicated S-Interface for V valves 2 Input / 2 Output Models Valve Island ssemblies VH02-XXX13 88 ottom VH02-XXX13 Ext Power S-i us 59 Valve Island assemblies for up to 2 solenoids. Weight: (N x 0,1) + 0,0 Kg. 4 off Mounting Holes Ø5,2 Dual Pressure Valve Island ssemblies VH01-01X13 ottom VH01-01X13 LED's M 4 Pin Male onnectors Valve Island assemblies for 2 solenoid valves fitted with dual pressure blanking plate between stations. Weight: (N x 0,180) + 0, Kg ports are available. hange 4th digit as shown: VH**-XXX13 =ISO 2 Input/2 Output LHS S-I Module () VE1S ,190 Kg 29 Multipole Module () V08551R-Q ,5,25 ottom View '/' '/' G 3 /8 5, Tie Rod Kits () V51-Q03** Weight: (N x 0,001) + 0,003 Kg V51-Q04** Weight: (N x 0,003) + 0,004 Kg For Sub-base - 2 required ** = Number of stations in Sub-base, 01-1 DIN-Rail Mounting Kit V319-K30 See Electrical Details for Wireway on page For details of associated S-Interface products see Section.4.0. N = Number of stations N/UK
11 Modular Sub-base ssemblies with Dedicated S-Interface for V valves 8 Output Models Valve Island ssemblies VJ02-XXX13 88 ottom VJ02-XXX13 Ext Power S-i us 59 Valve Island assemblies for up to 8 solenoids. Weight: (N x 0,1) + 0,0 Kg. D E Dual Pressure Valve Island ssemblies M 4 Pin Male onnectors 4 off Mounting Holes Ø5,2 VJ**-**X13 LED's LED's M 4 Pin Male onnectors ottom VJ**-**X13 Valve Island assemblies for up to 8 solenoids. Weight: (N x 0,1) + 0,0 Kg **-** = 01 to 0 to indicate position of Dual Pressure lanking Plate, e.g VJ01-03X13 indicates a 4 station base divided into groups of 1 and 3. ports are available. hange 4th digit as shown: VJ**-**X13 =ISO 4 Output LHS S-I Module () VE1S Output RHS S-I Module () VE1S Multipole Module () V08551R-Q0913 0,180 Kg 0,180 Kg 23,5,25 0 '/' G 3 /8 29 '/' Tie Rod Kits (D) V51-Q03** Weight: (N x 0,001) + 0,003 Kg V51-Q04** Weight: (N x 0,003) + 0,004 Kg For Sub-base - 2 required ** = Number of stations in Sub-base, 01-1 DIN-Rail Mounting Kit (E) V319-K30 See Electrical Details for Wireway on page For details of associated S-Interface products see Section.4.0. ottom View 5, N/UK
12 Modular Sub-base ssemblies with Dedicated S-Interface for V valves 4 Output / 4 Input Models Valve Island ssemblies VK02-XXX13 ottom VK02-XXX13 Ext Power S-i us Valve Island assemblies for up to 2 solenoids. Weight: (N x 0,1) + 0,0 Kg. D E Dual Pressure Valve Island ssemblies LED's 4 off Mounting Holes Ø VK**-**X13 ottom VK**-**X13 Valve Island assemblies for 2 solenoid valves fitted with dual pressure blanking plate between stations. Weight: (N x 0,180) + 0, Kg ports are available. hange 4th digit as shown: VK**-XXX13 =ISO M 4 Pin Male onnectors Input / 2 Output LHS S-I Module () VE1S ,190 Kg Input / 2 Output RHS S-I Module () VE1S ,190 Kg 23,5,25 ottom View '/' '/' G 3 /8 5, Multipole Module () V08551R-Q0913 Tie Rod Kits (D) V51-Q03** Weight: (N x 0,001) + 0,003 Kg V51-Q04** Weight: (N x 0,003) + 0,004 Kg For Sub-base - 2 required ** = Number of stations in Sub-base, 01-1 DIN-Rail Mounting Kit (E) V319-K30 See Electrical Details for Wireway on page For details of associated S-Interface products see Section.4.0. N/UK
UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
Valves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
zamak nitrile rubber self-extinguishing technopolymer aluminum
PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
ISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves
BD ISO 0/ (VDM ) ISO 0 ( mm) ISO 0 ( mm) Valves BDE = solenoid valves ISO 0/ with integrated connection including V DC coils and connector BDB = solenoid valves ISO 0/ with external connection with M connector
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
size 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
G1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
zamak nitrile rubber self-extinguishing technopolymes aluminum
G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
type V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
RM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
zamak nitrile rubber selfestinguishing technopolymer aluminum B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool
P0 0mm COMPCT valves - threaded body and for sub-base mounting - Low standard power consumption (0,W): low power consumption electropilot B0 (standard version with LED) - Quick response times - High flow
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
3/2-way pneumatic cartridge solenoid valve
3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as
Line-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
Directional Control Valves
echnical Information General he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available in 2 or 3-position
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
www.sebury.com.cn Digital Keypad Use s Manual
K3 K4 www.sebury.com.cn Digital Keypad Use s Manual Contents Introduction Introduction Specifications Intramural Interface Circuit 3 Mounting 3 Wiring 5 Power UP 7 Engineer Programming Mode 7 The K3/K4
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
mpm DIN 43650 CONNECTORS
mpm DIN 43650 CONNECTORS : Highest quality, robust connectors for hydraulic and pneumatic electromechanical devices Broad offering of DIN 43650 connectors and devices Combined Brad and mpm cordsets : Provide
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
2 position single. (Standard) 100V AC 50/60Hz 200V AC 50/60Hz 24V DC. 2 position double
4/ Port Solenoid Valve Rubber Seal VZ1000/000/000 Solenoid Valve Variations Port Size Effective area (mm 2 ) Position solenoid Voltage Electrical entry Option/ Indicator light and surge voltage suppressor
GROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
Commando Technical. plugs 16 and 32 amp. plugs 63 amp. plugs elv. www.mkelectric.co.uk. wiring devices ingress protected C A
641 ommando Technical wiring devices ingress protected www.mkelectric.co.uk plugs 16 and 32 amp mps Pin. 100-130V 200-250V 380-415V 440-460V 480-500V able Terminal onfig- 50-60Hz 50-60Hz 50-60Hz 50-60Hz
Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3
Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00
Directional seated valves type VP 1
Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual
Procedure for testing the integrity of the Festo and Numatics valve stacks:
Procedure for testing the integrity of the Festo and Numatics valve stacks: 1. Disconnect the Injection Cylinder Clevis from the Injection Lever; let the Injection Cylinder lean back clear of the Injection
Series P215PR/RM Direct- and Remote-Mount Pressure-Actuated Condenser Fan Speed Controllers for Single-Phase Motors
European Refrigeration Controls Catalogue Catalogue Section 4 Product Bulletin P215PR/RM Issue 01/03/2013 Series P215PR/RM Direct- and Remote-Mount Pressure-Actuated Condenser Fan Speed Controllers for
SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4
SPOO & SV VAVS monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FATURS Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended
STC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
In addition, a number of auxiliary options are available (para 2.7) as well as optional slices for special requirements (para 2.8).
DS3002 1. General Description This data sheet describes the Modular Power (MP) Electro Hydraulic Power Units, which have been designed to provide an advanced and flexible means of brake control. The MP
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
ABLOY DA60 SWING DOOR OPERATOR Installation and commissioning manual Abloy Oy An ASSA ABLOY Group company APPROVALS / STANDARDS Low Voltage directive 7//EEC as amended by the directive 9/68/EEC EMC directive
1978-83 Malibu 1978-87 Monte Carlo 1978-87 El Camino
Important facts about this kit. 1. The dash panel used in this picture is used by permission of Covan's Classic. 2. This kit requires some modification to your original under dash wiring harness. It is
On-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
Solenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits
Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
Operating Instructions
D-TEK Vehicle Loop Detector Operating Instructions This product is an accessory or part of a system. Always read and follow the manufacturer s instructions for the equipment you are connecting this product
EVANS ELECTRONIC TEMPERATURE CONTROL TROUBLESHOOTING GUIDE for systems equipped with electric coolant valve and external PC board.
EVANS ELECTRONIC TEMPERATURE CONTROL TROUBLESHOOTING GUIDE for systems equipped with electric coolant valve and external PC board. This Troubleshooting Guide covers the electric coolant valve and control
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
SOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
Check Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
Valve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
10 mm Solenoid Valves. 0,6 W Power Consumption. 10,5 mm wide. 230 l/min air-flow. Service friendly design. High quality solenoid system
10 mm Solenoid Valves 0,6 W Power Consumption 230 l/min air-flow 10,5 mm wide Service friendly design High quality solenoid system Table of Contents page 2 page 5/2 way in-line valves 3 MMD 510 301 24DC
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
Combi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
PTO OWNER S MANUAL ALLISON FAMILY CODE. pag.1
PTO OWNER S MANUAL FAMILY CODE ALLISON pag.1 CONTENTS GENERAL INFORMATION Safety information...3 OMFB P.T.O. Safety Label Instructions...6 Foreword...7 INSTALLATION INSTRUCTIONS Mounting the PTO on the
PARTS & INSTALLATION INSTRUCTIONS MEYER SNOW PLOW LIGHTS
Form 1-696 R1 January, 2003 PARTS & INSTALLATION INSTRUCTIONS MEYER SNOW PLOW LIGHTS PARTS LIST ITEM PART NO. QTY. DESCRIPTION 07033 1 SNOW PLOW LIGHT CARTON 1 07034 1 Snow Plow Light, Pass. Side (No Hardware)
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html TECHNICAL SERVICE DEPARTMENT Removal, Cleaning, & Reinstallation of the Burner Assembly For models 74 & GT199 Required tools -
Blue Point Engineering
lue Point Engineering 10-Ch udio Controller Description: This board is designed to control the sequence or random playback by remote user switch or relay contact of 1 to 10 channels of audio files that
Electro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
Reliance DuraStar ORDINARY LOCATION INSTALLATION, OPERATING & MAINTENANCE INSTRUCTIONS
STORAGE and HANDLING The LED Illuminator meets or exceeds all applicable specifications when shipped from the factory. All units should be inspected upon receipt to ensure that no damage has been incurred
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
Installation and User Instructions Unvented Electric Storage Water Heater Models: S10UNV, S15UNV.
Installation and User Instructions Unvented Electric Storage Water Heater Models: S10UNV, S15UNV. MULTIPOINT Please read and understand these instructions before starting work. Please leave this leaflet
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
SELECTION, APPLICATION AND MAINTENANCE
DIESEL PROTECTION SYSTEMS Automatic Diesel Engine Shut Down System for Safe Area Applications SELECTION, APPLICATION AND MAINTENANCE Series 300 Series 310 SYSTEM DESCRIPTION Suitable for attended engine
Electro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
E T K A 14:36 18.02.20100 970-00. Year. Illustration. Model. Seite: 001. et_bt1.frm. Pos Part Number Name Remarks Qty Model.
0 7 70-00 4:36 8.02.2000 connector housing pin 05 05 37 diode connector 2 3 4 5 6 2 05 05 37 D diode connector 7 8 0 2 3 4 5 6 7 8 20 2 22 23 24 25 26 27 28 2 30 3 32 33 34 3 357 07 7 B terminal pin housing
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
Operating instructions. AS-i Profibus gateway AC1411 / AC1412 7390884/00 04/2014
Operating instructions AS-i Profibus gateway AC1411 / AC1412 7390884/00 04/2014 Contents 1 Preliminary note 4 1.1 Notes on this document 4 1.2 Symbols used 4 2 Safety instructions 4 2.1 General 4 2.2 Installation
GEBCO (PTY) LTD - Netafim Product List - 1st August 2011
AQUANET PLUS & ITEC CONTROLLERS Globe - Solenoid, Manual Override and Mechanical Throttle Aquanet Valve - DC 20 mm BSP Valve (Solenoid Valve) 34500-001000 Aquanet Valve - DC 25 mm BSP Valve (Solenoid Valve)
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
TS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
Coils - Connectors. Coils Connectors. Summary. RE 18325-90/12.10 1/10 Replaces: RE 18325-90/02.10. Description
RE 18325-90/12.10 1/10 Replaces: RE 18325-90/02.10 Coils Connectors Summary Description Page Description Page Coils Coil S8-356 - CLASS H - 20 W 2-3 Coil S8-356 - CLASS H - 17 W 4 Coil S5 - CLASS H 5 Coil