Magnetic Catch IPS INDUSTRIAL PROFILE SYSTEMS. Catalog 1816 Hardware

Size: px

Start display at page:

Download "Magnetic Catch IPS INDUSTRIAL PROFILE SYSTEMS. Catalog 1816 Hardware"

Branden Gilbert
7 years ago
Views:

1 Magnetic Catch Holding Force X 0 N (. lb) Y 10 N (. lb) Mounting on 0 series profile Mounting on 8 series profile Assembly of the Double Bracket 0 on 0 series profile Holding force of Magnetic Catch Quick catch for swinging or sliding doors. For different holding strengths rotate catch 180º. Adjust position using slotted mounting holes. Complete with pan head screw. Can be used on 0, 0 and 8 series profiles. glass-filled nylon, black, with Mx10 pan head screw and hexagon nut. Strike Plate: St, zinc plated Pressure sensitive adhesive: Neoprene foam with acrylic adhesive. Designed to function under intermittent break away load. Mounting Brackets: Al, anodized Mounting Dims (mm) No. of Bracket A B Taps Order all hardware separately. Fastening Set 0 (0-07): two M6x0 BHCS and two M6 T-slot nut For attachment to 8 series profiles: two M6x16 SHCS (-16-6) and two M6 Economy T-slot nuts 8 (0-090). Magnetic Catch 1 pc 8 g -06 Fastening Set, Catch 0 1 set 9 g 0-07 Strike Plate 1 pc 8 g -01 Single Bracket 0 1 pc 60 g -16 Double Bracket 0 1 pc 70 g -17 Single Bracket 8 1 pc 0 g -18 Double Bracket 8 1 pc 0 g

Ball Catch PA 800--9 1-0 6 1 Holding force can be adjusted by rotating catch spring in the housing 90 Min. = 0 N (6.7 lbs) Max.

2 Ball Catch PA Holding force can be adjusted by rotating catch spring in the housing 90 Min. = 0 N (6.7 lbs) Max. = 0 N (11 lbs) - After selecting the holding force plates that are not needed are removed ( & ) Attachment to a sliding door Attachment to a swinging door -0Z6 7 6 Mounting dimensions 7 Using the ball catch bracket Catch for swinging and sliding doors. Holding force is adjustable by turning the snap spring by 90º in the housing. Slots in housing permits positioning for panel thickness. Can also be used as a door stop. Housing: glass-filled nylon, black Snap Spring: St Ball Screw: St, zinc plated Bracket (-0Z6): Al, anodized Order all hardware separately 0-07: two Mx0 BHCS and two M T-slot Nut -0Z : Bracket, two Mx1 BHCS, two M8x1 BHCS and three M8 T-slot nuts St 0 Ball Catch, PA 1 pc g -0 Fastening Set, Catch 0 1 set 9 g 0-07 Ball Catch Bracket with hardware 1 set 98 g -0Z Ball Catch Bracket 1 pc g -0Z6 101

3 -Way Ball Catch Series Std 8, 0 Series Strike can enter from front or either side -Way Ball Catch on swinging door -Way Ball Catch on sliding door Servicing of the slot for -00 on 0 Std or 8/0 series profiles for sliding doors. For 0 series Heavy or Light profiles mill slot 8x9.x1. Dp. -01 Universal door catch for swinging and sliding doors in small and medium load ranges. Can be mounted in serviced slot for flush closing. Brass, chrome finish with two steel balls for adjustable spring tension Order all hardware separately -Way Ball Catch, Small 1 set 6 g -00 -Way Ball Catch, Medium 1 set 0 g

4 Grabber Door Catch Grabber Door Catch on 8 series profile swinging door, shown mounted with a custom bracket Mounting dimensions and micro-switch contacts A - Common B - Connection is live when latch is closed C- Connection is live when latch is open Push to close, pull to open door catch for mounting inside of enclosures. Catch with micro-switch is designed to operate a warning system and is not to be used as a safety switch. Nylon, black Approximate pull-up force: -10: N (10 lbs) -11: N ( lbs) Order all hardware separately -11 Grabber Door Catch 1 set 17 g -10 Grabber Catch w/ Micro-Switch 1 set 1 g

5 Quarter Turn Latch Assembly of Quarter Turn Latch on 0 series profile for swinging doors Quarter Turn Latch mounted in 0 series profile for sliding or bi-fold doors - Quarter Turn Latch mounted to panel for swinging door on 0, 8 or 0 series profile 6 Dimensions for round or square mounting hole in 0x0 profile or panel series latch profiles for swinging, sliding or bi-fold door applications. When installed into swinging door panel, latch can be used with 0, 0, 8 and 0 series profiles. T-handle and wing knob styles eliminate the need for a door handle. 6 NOTE: All Cams must be ordered separately Style Dims (mm) Material Weight Part # A B (g) profile 0 mount Handle: Polyamide T-Handle fig 1, 0 Housing: Zinc die, 00-1 Non-Locking panel mount 18 8 black powder coated fig,, 1-1 profile 0 mount Handle: Polyamide Wing Knob fig 1, 0 Housing: Zinc die, Keyed Alike panel mount black powder coated (one key included) fig,, 18 8 Cylinder: Zinc die, 90-1 chrome plated Square 7mm profile 0 mount Housing/insert: Insert fig 1, 0 Zinc die, (order key separately) panel mount black powder coated fig,,

Accessories for Quarter Turn Latch 800--9-10Z1-10Z 1-10Z -10Z -10Z -10Z6 1- Additional hardware can be used for swing door stops such as a Connection Element (-10 or -1) or Multiblock PA (-100 or

6 Accessories for Quarter Turn Latch Z1-10Z 1-10Z -10Z -10Z -10Z6 1- Additional hardware can be used for swing door stops such as a Connection Element (-10 or -1) or Multiblock PA (-100 or -10) Keeper bracket (-10Z7) used with the hooked cam (-1Z1) for sliding or bi-fold doors -1Z1 Various accessories for Quarter Turn Latches. -10Z7 Spare Key for -1/-1 1 pc g -10Z1 Key for 7mm Square for -1/-1 1 pc 8 g -10Z Cam -10 (offset 8) 1 pc g -10Z Cam -16 (offset ) 1 pc 0 g -10Z Cam -8 (offset 10) 1 pc g -10Z Cam -0 (offset -) 1 pc 0 g -10Z6 Hooked Cam 1 pc 1 g -1Z1 Keeper Bracket 1 pc 1 g -10Z7 Rachet Lock Used to lock overlaping sliding panels up to 1/" thick. Particulary suitable for display cases when used with sliding door guide profiles. St, nickel finish Includes keys Minimal panel overlap - mm Rachet Lock 1 set 90 g

Sliding and Folding Door Fittings Sliding Door Accessories

Sliding and Folding Door Fittings Sliding Door Accessories Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness: