BLUM AVENTOS HK-XS AVENTOS HK-XS. > Compact fitting, great convenience

Transcription

1 BLUM AVENTOS HK-XS AVENTOS HK-XS > Compact fitting, great convenience

2 AVENTOS HK-XS AVENTOS HK-XS is a compact stay lift fitting with a sleek and narrow design. It is ideally suited for applications in high wall cabinets with low heights and shallow internal depth. AVENTOS HK-XS lifts opens and closes with a seemingly weightless movement. AVENTOS HK-XS offers an economical solution whilst featuring the familiar AVENTOS quality of motion. Silent closing AVENTOS HK-XS is combined with CLIP top BLUMOTION hinges for silent and effortless closing. Numerous possibilities Whether thick wooden fronts or wide aluminium frames, the fixing positions always remain the same. This allows different materials and front thicknesses to be easily integrated. BLUM AVENTOS HK-XS / PAGE 2

3 Proven Blum quality The core element of the compact fitting is the robust spring package that ensures high stability and durability for the lifetime of the furniture. Large, heavy fronts Wide and heavy fronts can be used when the lift mechanism is installed on both sides of the cabinet. CLIP mechanism The lift mechanism can be assembled toolfree using the CLIP technology. BLUM AVENTOS HK-XS / PAGE 3

4 AVENTOS HK-XS: BLUMOTION application LF K K K1501 LF LF Lift mechanism one-sided LF Power factor Power factor LF = cabinet height KH (mm) x front weight incl. double handle weight (kg) The power factor is doubled when used on two sides. A trial application is recommended when you are in a borderline area of the individual lift mechanism. 4 Hinge recommendation 2) CLIP top BLUMOTION 110 INSERTA With spring 71B B Screw-on With spring 71B B355 Knock In With spring 71B B358 E Dowel E With spring 71B358E B358E Symmetrical lift mechanism (suits BLUMOTION) Power factor K K K opening angle* 2 Cabinet fixing Screw-on 20K EXPANDO 20K51E Nickel plated steel, one required per mechanism 3 Front fixing bracket Screws 1) 20K EXPANDO 20K41E Nickel plated steel, one required per mechanism Minimum 2 hinges required per door (with spring) For more hinge options view Lincoln Sentry Cabinet Hardware catalogue section B Hinges sold as Each 5 Mounting plate recommendation Horizontal cam mounting plate Fixing Spacing Screw-on 0 mm 175H H3100V2 Supplied 2 per bag E Dowel Supplied as Each 0 mm 177H3100E H3100E One required per hinge For more mounting plate options view Lincoln Sentry Cabinet Hardware catalogue section B 1) Use 2 chipboard screws for wooden fronts. Use 2 countersunk self-tapping screws for wide aluminium frames. 2) Alternatively, use the CLIP top BLUMOTION hinges, 95 profile door hinges or the CLIP top hinges 107, 95 profile door hinges in combination with clip-on BLUMOTION 973A. * For hinges with smaller opening angles, these are limited by the hinges. Accessories Hinge arm cover cap Blum Stamped BP Hinge boss spacing (Suits Screw-on only) CLIP top BLUMOTION Nylon, Code 1.5 mm, sold per box of T Hinge boss cover cap Opening angle stop 86 CLIP top BLUMOTION 70T Nylon Code 70T BLUM AVENTOS HK-XS / PAGE 4

5 AVENTOS HK-XS: application LF K1301T 20K1101T 20K1501T LF LF Lift mechanism one-sided LF Power factor Power factor LF = cabinet height KH (mm) x front weight incl. double handle weight (kg) The power factor is doubled when used on two sides. A trial application is recommended when you are in a borderline area of the individual lift mechanism a 2 1 6b 1 Symmetrical lift mechanism (suits ) Power factor K1101T K1301T K1501T opening angle* 2 Cabinet fixing Screw-on 20K EXPANDO 20K51E Nickel plated steel, one required per mechanism 3 Front fixing bracket Screws 1) 20K EXPANDO 20K41E Nickel plated steel, one required per mechanism 7 5 Mounting plate recommendation Horizontal cam mounting plate Fixing Spacing Screw-on 0 mm 175H H3100V2 Supplied 2 per bag E Dowel Supplied as Each 0 mm 177H3100E H3100E 6 set One required per hinge For more mounting plate options view Lincoln Sentry Cabinet Hardware catalogue section B For drilling Ø 10 x 50 mm Plastic Short version, length 50 mm Consisting of: 1 x 1 x screw-on catch plate 2) 1 x chipboard screw Horizontal adapter plate Suits short (50mm) mechanism Supplied as Each Silk white SW Terra black Silk white SW Terra black ) Use 2 chipboard screws for wooden fronts. Use 2 countersunk self-tapping screws for wide aluminium frames. 2) Note: The glue-on catch plate should not be used in combination with for AVENTOS HK-XS. * For hinges with smaller opening angles, these are limited by the hinges. 4 Hinge recommendation CLIP top 120 for INSERTA Unsprung 70T5590BTLMB T559 Screw-on Unsprung 70T5550.TL T555 minimum 2 hinges required per door (without spring) For more hinge options view Lincoln Sentry Cabinet Hardware catalogue section B Hinges sold as Each Accessories Hinge arm cover cap Blum Stamped BP BLUM AVENTOS HK-XS / PAGE 5

6 H Planning Information Cabinet positions for lift mechanism Space requirement 137+D+K SOB H = D + K + SOB D Mounting plate spacing K Hinge crank Horizontal hinge arm 0 mm Cranked hinge arm 9.5 mm Double cranked hinge arm 18 mm SOB Top panel thickness min min LH LH = = LH Internal cabinet height (45) min 125* 27 (min min 100*) 125* 27 (min 100*) Front assembly Space requirement FAo D+K (131.5+D+K) Wooden fronts and wide aluminium frames 1) Ø 3.5 x 15 mm FAo Upper front overlay SFA Side front overlay Number of hinges 3 hinges starting at cabinet width 900 mm and/or power factor 1800 Y = (FH a) x 0.3 FD (mm) a (mm) FD Front thickness FH Front height 4 hinges starting at cabinet width 1200 mm and/or power factor ) Use 2 chipboard screws for wooden fronts. Use 2 countersunk self-tapping screws for wide aluminium frames. Cornice and crown moulding clearance ( ) Special drilling positions for a minimum internal depth of 100 mm To ensure optimal motion, use standard drilling positions for a minimum internal depth of 125 mm FD (mm) x (mm) FD Front thickness Minimum gap (F) for fronts with a front radius (R = 1 mm) based on the factory setting for CLIP top BLUMOTION 110 Minimum gap Front thickness FD Additional for + 2 mm side adjustment Drilling distance A trial application is recommended CLIP top BLUMOTION 110 MFu MFo Minimum gap at the bottom (1.5 mm) Minimum gap at the top depending on hinge used F Gap CLIP top BLUMOTION 110 FA Front overlay Drilling distance Drilling distance Front overlay FA Mounting plate BLUM AVENTOS HK-XS / PAGE 6

7 Planning Information: Fixing position short version Horizontal adapter plate short Installation dimensions short version Horizontal adapter plate short Factory setting = 2 mm Screw-on catch plate planning For drilling Horizontal adapter plate FAu Lower front overlay * We recommend offsetting the positioning of by 3 mm for the screw-on catch plate. Note: the glue-on catch plate should not be used in combination with for AVENTOS HK-XS. Assembly Devices Front assembly Front fixing bracket Hinges Hinges Universal drilling template ZML ECODRILL M Drilling template for hinges Ø 8 mm / Ø 2.5 mm A Cabinet assembly Cabinet assembly Mounting plate assembly Universalsingle template Template Can also be used for cabinet fixing drilling template For drilling. Can also be used for for AVENTOS BLUM AVENTOS HK-XS / PAGE 7

8 BLUM AVENTOS HK-XS National Customer Service: Ph: Fax: Scan QR code to find your nearest branch For locations please visit BR0064CH All images in this brochure are copyrighted BLUM