VALVES ISO 5599/1, SERIES IPV-ISV
|
|
|
- Warren Chandler
- 7 years ago
- Views:
Transcription
1 VALVES ISO 99/1, SERIES IPV-ISV The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO99-1. They are available in the -way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA Fluid Operating pressure: pilot-assisted Minimum pilot pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar Installation Assembly Recommended lubricant Solenoid pilot: Manual: Maximum torque nut/coil Compatibility with oils: ISO 1 ISO 2 ISO 3 Filtered air without lubrication; lubrication, if used, must be continuous Vacuum 10 bar pneumatic bar solenoid/pneumatic Vacuum 10 bar pneumatic 1 10 bar solenoid/pneumatic Vacuum 10 bar 2. bar C 7. mm 12 mm 1 mm 20 Nl/min bar 67.1 Nl/min bar Nl/min bar 0.36 bar/bar 0.2 bar/bar 0.3 bar/bar 700 Nl/min 100 Nl/min 3200 Nl/min 1100 Nl/min 2700 Nl/min 600 Nl/min In any position (vertical assembly is not recommended for bistable valves subjected to vibration) On single and manifold bases according to ISO 99/1 ISO and UNI FD 22 to CNOMO / in-line pilot / M12 to CNOMO bistable on solenoid pilot monostable on valve body see GENERAL CATALOGUE page 6.1/0 or webpage COMPONENTS VALVE BODY: Aluminium END CAP: HOSTAFORM SPOOL: chemically nickel-plated aluminium DISTANCE PLATES: plastic GASKETS: NBR nitrile rubber PISTONS: HOSTAFORM PISTON GASKETS: NBR nitrile rubber FILTER: sintered bronze SPRINGS: special steel OPERATOR: Brass pipe Stainless steel core 1
2 FLOW CHARTS ISO 1 ISO 1 ISO 2 FLOW RATES (Nl/min) FLOW RATES (Nl/min) PRESSURE (bar) PRESSURE (bar) ISO 3 FLOW RATES (Nl/min) PRESSURE (bar) KEY TO CODES I P V P N S O O FAMILY PORT FUNCTION OPERATORS 1 RESETTING 12 FURTHER DETAILS IPV ISV ISO pneumatic ISO solenoid/ pneumatic ISO 1 6 ISO 2 7 ISO 3 /2 6 /3 PN pneumatic SO solenoid/pneumatic SE electric pilot-assisted DO solenoid/pneumatic in line DE solenoid, assisted in line CO M12 solenoid/pneumatic CE M12 solenoid assisted S B D mechanical spring bistable differential OO /2 CC closed centres OC open centres PC pressure centres only fo ISO 1 and ISO 2 2
3 VALVES ISO 99/1, PNEUMATIC SERIES IPV TECHNICAL DATA Operating pressure Minimum operation pressure: Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar Response times at 6 Bar: Repositioning response times at 6 Bar: Manual ISO 1 ISO 2 Vacuum 10 bar ISO 3 2. bar 1 bar -10 to 60 C 7. mm 12 mm 1 mm 20 Nl/min bar 67.1 Nl/min bar Nl/min bar 0.36 bar/bar 0.2 bar/bar 0.3 bar/bar 700 Nl/min 100 Nl/min 3200 Nl/min 1100 Nl/min 2700 Nl/min 600 Nl/min 12 ms 2 ms 3 ms 20 ms 30 ms ms 30 ms 3 ms ms 20 ms 30 ms ms monostable on valve body PNEUMATIC ACTUATION ISO 1 IPV PNS OO IPV PNB OO IPV PND OO IPV 6 PNS CC IPV 6 PNS OC IPV 6 PNS PC PNEUMATIC ACTUATION ISO 2 IPV 6 PNS OO IPV 6 PNB OO ISO 99 Size 2 max 10 bar C IPV 6 PND OO M6 IPV 66 PNS CC IPV 66 PNS OC IPV 66 PNS PC
4 PNEUMATIC ACTUATION ISO 3 Abbrev IPV 7 PNS OO ISO 99 Size 3 max 10 bar C 16 (for /2) M IPV 7 PNB OO IPV 7 PND OO (for /3) 6 IPV 76 PNS CC IPV 76 PNS OC IPV 76 PNS PC NOTES
5 VALVES ISO 99/1, SOLENOID/PNEUMATIC, SERIES ISV TECHNICAL DATA Operating pressure: pilot-assisted Minimum pilot pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar TRA / TRR monostable at 6 Bar TRA / TRR bistable at 6 Bar Solenoid pilot: Manual: Coils: Maximum torque coil/nut ISO 1 ISO 2 ISO bar 1 10 bar Vacuum 10 bar 2. bar -10 to 60 C 7. mm 12 mm 1 mm 20 Nl/min bar 67.1 Nl/min bar Nl/min bar 0.36 bar/bar 0.2 bar/bar 0.3 bar/bar 700 Nl/min 100 Nl/min 3200 Nl/min 1100 Nl/min 2700 Nl/min 600 Nl/min 2 ms / 0 ms 39 ms / 60 ms 0 ms / 120 ms 20 ms / 20 ms 2 ms / 2 ms 3 ms / 3 ms Standards CNOMO bistable on solenoid pilot monostable on valve body 30mm side DIN 360 Form A ISO 22 mm side MONOSTABLE /2 ISO ISV SOS OO ISV SES OO MONOSTABLE /2 ISO 2 16 ISV 6 SOS OO ISV 6 SES OO ISO 99 Size 2 max 10 bar C M
6 MONOSTABLE /2 ISO 3 17 ISV 7 SOS OO ISV 7 SES OO BISTABLE /2 ISO 1 MONOSTABLE /3 ISO 1 ISO 99 Size 3 max 10 bar C M ISV SOB OO ISV SOD OO ISV 6 SOS CC ISV 6 SOS OC ISV 6 SOS PC ISV SEB OO ISV SED OO ISV 6 SES CC ISV 6 SES OC ISV 6 SES PC
7 BISTABLE /2 ISO 2 MONOSTABLE /3 ISO 2 Abbrev ISV 6 SOB OO ISV 6 SOD OO ISV 66 SOS CC ISV 66 SOS OC ISO 99 Size 2 max 10 bar C M6 10 ISV 66 SOS PC ISV 6 SEB OO ISV 6 SED OO ISV 66 SES CC ISV 66 SES OC ISV 66 SES PC BISTABLE /2 ISO 3 MONOSTABLE /3 ISO 3 Abbrev ISV 7 SOB OO ISV 7 SOD OO ISV 76 SOS CC ISV 76 SOS OC ISO 99 Size 3 max 10 bar C 10 M ISV 76 SOS PC (for /2) 10 (for /3) ISV 7 SEB OO ISV 7 SED OO ISV 76 SES CC ISV 76 SES OC ISV 76 SES PC
8 VALVES ISO 99/1, PNEUMATIC, SERIES ISV WITH IN-LINE SOLENOID PILOT TECHNICAL DATA Operating pressure: pilot-assisted Minimum pilot pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar TRA / TRR monostable at 6 Bar TRA / TRR bistable at 6 Bar Solenoid pilot: Manual: Coils: Maximum torque coil/nut ISO bar 1-10 bar Vacuum 10 bar 2. bar -10 to 60 C 7. mm 20 Nl/min bar 0.36 bar/bar 700 Nl/min 1100 Nl/min 2 ms / 0 ms 0 ms / 0 ms In line pilot bistable on solenoid pilot 30mm side DIN 360 Form A ISO 22 mm side MONOSTABLE /2 ISO ISV DOS OO ISV DES OO BISTABLE /2 ISO ISV DOB OO ISV DEB OO
9 MONOSTABLE /3 ISO ISV 6 DOS CC ISV 6 DOS OC ISV 6 DOS PC ISV 6 DES CC ISV 6 DES OC ISV 6 DES PC NOTES 9
10 COILS AND CONNECTORS FOR ISO 99/1 SOLENOID VALVES SERIES ISV COILS SIDE 22 mm FOR ISO 99/1 SOLENOID VALVES ø.2 M ø Voltage tolerance: -10% + 1% Insulation class: F1 Degree of protection: IP6 EN6029 with connector Avoid prolonged exposure to the atmospheric agents Coil temperature 100% ED: 70 C at 20 C Ambient temperature According to Atex 9/9 CE rule, group 2, category 3 GD Nominal voltage Absorption Inrush Holding 12Vcc 2Vcc 2V 0/60Hz 110V 0/60Hz 220V 0/60Hz 2W 2W.3VA.3VA.3VA 2W 2W 3.VA 3.VA 3.VA Coil 22 Ø BA 2W-12VDC Coil 22 Ø BA 2W-2VDC Coil 22 Ø BA 3.VA-2VAC Coil 22 Ø BA 3.VA-110VAC Coil 22 Ø BA 3.VA-220VAC W W W W W COILS SIDE 30 mm 2 ø16 ø16.3 ø M3 1 electric contact DIN360 shape A ISO 00 Voltage tolerance: -10% + 10% Insulation class: F1 Degree of protection: IP6 EN6029 with connector Avoid prolonged exposure to the atmospheric agents According to Atex 9/9 CE rule, group 2, category 3 GD Nominal voltage Absorption Inrush Holding 2Vcc 2V 0/60Hz 110V 0/60Hz 220V 0/60Hz W 10VA 10VA 10VA W VA VA VA Coil 30 Ø W-2VDC Coil 30 Ø VA-2VAC Coil 30 Ø VA-110VAC Coil 30 Ø VA-220VAC W W W W CONNECTOR FOR COILS SIDE 22 mm ~31 M3 1. ~2 ~ 6. Pg Colour Black Ø Cable Type Standard LED 2V LED 110V LED 220V LED + VDR 2V LED + VDR 110V LED + VDR 220V W W W W W W W CONNECTOR FOR COILS SIDE 30 mm ~30. M3 1. ~27 ~9 2 9 Pg9 2 1 Colour Black Ø Cable Type Standard LED 2V LED 110V LED 220V LED + VDR 2V LED + VDR 110V LED + VDR 220V W W W W W W W KIT COIL EEXM ø.2 ø Description KIT FOR COIL 30 2 VDC EEXMT CABLE 3M KIT FOR COIL 30 2 VDC EEXMT CABLE M KIT FOR COIL 30 2 VAC EEXMT CABLE 3M KIT FOR COIL 30 2 VAC EEXMT CABLE M KIT FOR COIL VAC EEXMT CABLE 3M KIT FOR COIL VAC EEXMT CABLE M KIT FOR COIL VAC EEXMT CABLE 3M KIT FOR COIL VAC EEXMT CABLE M according to Atex 9/9 CE rule, group 2, category 2 GD KIT COILS SIDE 22 IP6 Description KIT FOR COILS 22 - IP6 Improved IP6 protection, even after prolonged exposure to atmospheric agents. Applicable to valves with a technopolymer control. 10
type V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
SOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
size 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
G1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
zamak nitrile rubber self-extinguishing technopolymer aluminum
PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4
SPOO & SV VAVS monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FATURS Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
ISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves
BD ISO 0/ (VDM ) ISO 0 ( mm) ISO 0 ( mm) Valves BDE = solenoid valves ISO 0/ with integrated connection including V DC coils and connector BDB = solenoid valves ISO 0/ with external connection with M connector
servo-controlled 3-WaY vacuum solenoid valves WiTH
servo-controlled 3-WaY vacuum solenoid s WiTH low absorption electric coil The 3-way vacuum solenoid s in this series feature two positions with pneumatically pilot-operated conical shutters. They can
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
zamak nitrile rubber self-extinguishing technopolymes aluminum
G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
Solenoid/pneumatic valves, Tiger Classic
Solenoid/pneumatic valves, Tiger Classic Electrically or pneumatically actuated valves With internal or external pilot air Sturdy and reliable Specified types in accordance with ATEX directive for potentially
Solenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
Directional seated valves type VP 1
Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual
zamak nitrile rubber selfestinguishing technopolymer aluminum B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool
P0 0mm COMPCT valves - threaded body and for sub-base mounting - Low standard power consumption (0,W): low power consumption electropilot B0 (standard version with LED) - Quick response times - High flow
Control- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
Flow switches Series AD/VH
Flow switches Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling, watertight,
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
valvole 16 mm ad azionamento pneumatico pneumatically piloted valves - 16 mm
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
Line-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
Valves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
3/2-way pneumatic cartridge solenoid valve
3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as
% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
.55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard
Control blocks for two-hand start ZSB
Key features Function This pneumatic control block for twohand start ZSB is used where a manually started operation, such as the triggering of compressed air cylinders, would otherwise involve danger for
SQUARE D INDUSTRIAL CONTROL PRODUCTS
SQUARE D INDUSTRIAL CONTROL PRODUCTS CLASS 9012 3a INDUSTRIAL PRESSURE SWITCHES Type A Heavy duty switch for virtually any industrial application involving air, water, steam or oil Bellows, piston and
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
ORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar
Chiavari (Ge) - Italia Tel.: Italia + 0185 + 38.50.10 Fax: Italia + 0185 + 38.50.11 e-mail: orlando@orlando.it Http://www.orlando.it M R 50...: Radial pressure gauge ø 50 ( available scale in bar: 4, 6,10,12,16
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
DXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
Plastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
indirect electro-pneumatic, pneumatic, manual, mechanical pneumatic spring, mechanical spring G1/8 6,5 890
L-M UNVRSL istributors / - / - UNVRSL Modular System: possibility to create a lot of different valves with a short number of basis elements - ontrol: manual, mechanical,, electric - Traditional UNVR spool
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
DSE5J 83 280/112 ED DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SERIES 10 SUBPLATE MOUNTING ISO 4401-05 (CETOP 05)
83 280/112 ED DSE5J DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SERIES 10 SUBPLATE MOUNTING ISO 4401-05 (CETOP 05) p max 320 bar Q max 180 l/min MOUNTING SURFACE OPERATING
AMTRONIC AS -i R1300. Remote indication and control box for pneumatic actuators. User instructions 42814290 Ref. 8514.8372/2--EN
User instructions 42814290 Ref. 8514.8372/2--EN AMTRONIC AS -i R1300 Remote indication and control box for pneumatic actuators AMTRONIC R1300 AS--i can be fitted directly on all the range ACTAIR/DYNACTAIR
2 position single. (Standard) 100V AC 50/60Hz 200V AC 50/60Hz 24V DC. 2 position double
4/ Port Solenoid Valve Rubber Seal VZ1000/000/000 Solenoid Valve Variations Port Size Effective area (mm 2 ) Position solenoid Voltage Electrical entry Option/ Indicator light and surge voltage suppressor
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Control block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
Series P215PR/RM Direct- and Remote-Mount Pressure-Actuated Condenser Fan Speed Controllers for Single-Phase Motors
European Refrigeration Controls Catalogue Catalogue Section 4 Product Bulletin P215PR/RM Issue 01/03/2013 Series P215PR/RM Direct- and Remote-Mount Pressure-Actuated Condenser Fan Speed Controllers for
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
On-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
Safety at a high level!
SIKA Level Switch SIKA Level Switch Safety at a high level! Convincing Advantages easy and reliable method to monitor fluid levels proven float principle easy side installation using threads ¾" or ½" BSP
SOLENOID VALVE FOR REFRIGERATING SYSTEMS
SOLENOID VALVE FOR REFRIGERATING SYSTEMS FROM UALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel uality Range of Products
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10
D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 OVERVIEW D660 Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics
Direct steam injection humidifiers
Direct steam injection humidifiers Direct steam injection gives quality control of air humidity. Research and development in separation, the use of lightweight stainless steel combined a constant temperature
Solenoid valves VOFC Key features
Valve series VOFC Solenoid valves VOFC Key features General information The valves in the VOFC series are special 3/2-way and 5/2-way valves for process automation, for use within chemical and petrochemical
OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
Ordering Information. Cylindrical Proximity Sensor E2E/E2E2
Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened
Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
STC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
valvole ISO 5599/1 taglia 1
valvole ISO 5599/1 taglia 1 ISO 5599/1 valves - size 1 Valvole a spola 5/-5/3 5/-5/3 spool valves Montaggio su basi modulari o a posti fissi Installation on manifolds or multiple sub-bases Azionatore manuale
Pressure monitoring equipment for oil-sf 6. bushings, type GOEK
Pressure monitoring equipment for oil-sf 6 bushings, type GOEK Installation and maintenance guide 5693 827-6 en, Rev. 3, 2002-01-30 This document must not be copied without our written permission, and
QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system