Fully Welded Ball Valves
|
|
|
- Kelley Rogers
- 7 years ago
- Views:
Transcription
1 Ball Valves
2 Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure drop are required. Reference standards for all valves API 6D ( ISO ) design & monogrammed, Fire-Safe design and certificated according to API 607 / API 6 FA / BS 6755, Face to Face dimensions according to ASME B 16.25, Tight shut off according to API 598 & API 6D, Flanged RF or RTJ according to ASME B16.5, above 24 according to MSS SP44, Butt weld ends according to ASME 16.25, Common features Double block and bleed facility, in open and closed position; Self-relieving seats design; Anti-blow out stem design; Antistatic device; Each valve can be equipped with, manual lever, gear operator, or actuator; Triple barrier stem seals; Emergency seats sealant injection for size 12 and above; Emergency stem sealant injection for size 16 and above;
3 Designed With Your Needs In Mind 1 Triple-barrier stem seals Repackable online under pressure in both open and close position 2 Anti blow-out stem 3 Emergency sealant injection stem and seat High pressure grease fitting with triple metal to metal seal for reverse flow prevention 4 Sealant groove 6 All the way around on the external side of the seat ring 5 Heavy metal seat ring with soft insert 6 Preloaded elicoidal springs Around the seal unit provide maximum operational safety minimizing torque value 7 Two self regulating fork shaped bushings Reduce stress concentration on stem-ball connection 8 Body bleed fitting Body cavity may be drained in open and close position 9 Forged body and ball 10 Standard bonnet construction For easy fitting at job-site of extensions, gearing and power operators 11 Stem-thrust plate 12 Trunnions thrust plate PTFE impregnated steel bearings assure smooth non-sticking operation without lubrication Each kind of valve can be customized upon request, several features applicable Primary metal secondary Soft seats with delta-ring insert; Double piston effect seats; Anti-blow out stem design; Special materials; Under ground applications; Design, high and low temperature application; Low fugitive emissions certificate according to TA Luft VDI 2440, SIL 3 Certificate Available
4 Ball Valves Full and reduced bore valve Fig. 450 Full bore Fig. 460 Reduced bore DN 2 Class DN 3 Class DN 4 Class CUT WAY X-X CUT WAY Y-Y DRAIN PLUG Stem ball connections Emergency sealing (upon request) Off Fig. 450 Full bore Fig. 450 Full bore BW RF RJ DN 4 24 Class 600 DN 4 Class 900 DN DN 8 Class 900 DN 16 Class 1500 DN 26 DN 36 Class
5 FEATURES DESCRIPTION Standard safe - Fire safe execution Fire safe seat API 607- Bs Stem Body Automatic body Overpressure Relief The Pietro Fiorentini valves are designed to bleed automatically downwards every overpressure beyond 8 bars (115 PSI), which develops in the body cavity. Antistatic device Extended Steam Blow out proof stem The stem can be assembled only from the internal side of the valve. A stout collar keeps it inside the body. This solution allows to replace the outside gasket on the stern in case it is damaged. Double block and bleed The Pietro Fiorentini valves guarantee the double block of the seats when pressure is applied on both sides of the valve with the drain plug open.
6 FINITE ELEMENT METHOD (FEM) ANALISIS FEM Analisis The valve shall be used in fully open or closed position only. It is not allowed to operate the valve in partially open position. Hand lever Gear operated Open Gas over oil operated valves Closed View OFF ON
7 TECHNICAL INFORMATION O.RING TEMPERATURE RANGE FKM GLT Minimum temperature of continuos work FKM Points of minimum temperature intermittents HNBR NBR TEMPERATURE ( C) Maximum temperature of continuos work Point of maximum temperature intermittent SEAT INSERT PRESSURE ( bar ) PEEK 400 DEVLON PTFE Carbo-graphite filled TEMPERATURE ( C ) Solutions available with special materials for non-standard conditions
8 Construction Materials BODY GROUP TRIM NUMBAR POS-ITEM DESCRIPTION BODY ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF2 5 BONNET (UP) ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF CAP SCREW ISO 898/1-8.8 ISO 898/1-8.8 ISO 898/ STEM KEY AISI 4140 AISI 4140 AISI BONNET (LOW) DN24 ASTM A 350 LF2 ASTM A350 LF2 ASTM A 350 LF2 13 DRAIN PLUG ASTM A105 ASTM A105 RC22 AISI PLUG ASTM A105 ASTM A105 RC22 AISI STOP PIN IISO 898/1-8.8 AISI 316 AISI TAIL PIECE ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF2 34 FLANGE ASTM A350 LF2 ASTM A350 LF2 ASTM A350 LF2 47 HAND LEVER ASTM A 106* ASTM A 106* ASTM A 106* NUT ISO 898/1-6S* ISO 898/1-6S* ISO 898/1-6S* 49 SPING WASHER AISI 1075 AISI 1075 AISI GREASE NIPPLE ASTM A105 ASTM A105 RC22 AISI PIN AISI 4140* AISI 4140* AISI 4140* 66 STEM STOP AISI 1040* AISI 1040* AISI 1040* 74 WRENCH HEAD ASTM A105* ASTM A105* ASTM A105* 75 WASHER ASTM A 283=GrC* ASTM A 283=GrC* ASTM A 283=GrC* BALL BRACKET 26 EN10025-P335 NH FOR ALL TRIM TEMPERATURE LIMIT -29º C (-20º F) -29º C (-20º F) -46º C (-50º F) INTERNAL GROUP TRIM NUMBER POS-ITEM DESCRIPTION STANDARD NACE LOW TEMPERATURE SEAL ASTM A350 LF2+ENP ASTM A 350 LF2+ENP ASTM A 350 LF2+ENP AISI 316+ENP 3 BALL ASTM A105+ENP ASTM A105+ENP RC22 ASTM 350 LF2+ENP AISI STEM AISI 410 AISI 410 RC22 AISI 410 AISI 316* 9-31 THRUST PLATE CS-DRY BEARNING CS-DRY BEARNING RC22 AISI 316-DRY BEARNING AISI 316-DRY BEARNING SPRING AISI 302 INCONEL X 750 RC22 INCONEL X 750 INCONEL X THRUST BEARNING CS-DRY BEARNING CS-DRY BEARNING RC22 AISI 316-DRY BEARNING AISI 316-DRY BEARNING 32 THRUST BUSHING ASTM A105+ENP ASTM A105+ENP RC22 AISI 316 AISI GLAND AISI 1018* AISI 1018+ENP RC22 AISI 316 AISI 316 TEMPERATURE LIMIT -29º C (-20º F) -29º C (-20º F) -46º C (-50º F) -46º C (-50º F)
9 SEAL GROUP TRIM NUMBER ITEM DESCRIP- TION RATING NBR FKM HNBR FKM GLT 2 SEAT INSERT - CLASS PTFE/NBR PTFE/FKM PTFE/HNBR PTFE/FKM GLT DEVLON PEEK DEVLON PEEK 31 THRUST PLATE UP PTFE PTFE PTFE PTFE TO DN3 45 PACKAGING PTFE PTFE PTFE PTFE O RING NBR FKM HNBR FKM GLT FIRE SAFE RING GRAFITE - GRAPHITE GRAFITE - GRAPHITE GRAFITE - GRAPHITE GRAFITE - GRAPHITE FIRE SAFE RING AISI GRAPHITE AISI GRAPHITE AISI GRAPHITE AISI GRAPHITE TEMPERATURE LIMIT - 29 C to C - 10 C to C - 46 C to +121 C - 40 C to +240 C (-20 F to F) (+ 14 F to F) (- 50 F to F) (- 40 F to F) Note: * zinc coated ** alternative ASTM A 564 VI74 (17-4-PH) NR: NOT RECCOMENDED GOOD NACE: MR SULFIDE STRESS CRACKING RESISTANT MATERIAL FOR OIL FIELD EQUIPMENT CS: RC: carbon steel hardness Rockwell C ENP: electroless nickel plated Seat insert alternative (Consult our technical dep. for temperature limit). ADVICE TRIM N MATERIAL CRUDE OIL NACE LOW TEMP. (-50 F) NATURAL GAS BODY GROUP 10 CARBON STEEL NR NR 11 CARBON STEEL (NACE) NR 12 CARBON STEEL LOW TEMP. NR INTERNAL GROUP 30 CARBON STEEL NR NR 31 CARBON STEEL (NACE) 32 CARBON STEEL LOW TEMP. NR NR 35 STAINLESS STEEL SEALS GROUP NBR NBR NR FKM FKM NR HNBR HNBR FKM GLT FKM GLT TRIM APPLICATION INFORMATION The indicated table is based on the Pietro Fiorentini experience and on the application experiences with our valves at the values fixed by the ASTM/ASME/ ANSI/API regulations. The indications can be considered as a guide for the choice of the trim, but they are not an explicit or implicit guarantee for the proper application of our products or for their adaptability for a particular use.
10 Overall Dimensions valves FULL BORE FIG CLASS 150 Hand lever E 2" LEVER 3" LEVER 4" LEVER 6" MG 987/S 8" MG 50 10" MG " MG " MG " MG " MG " MG 250/80 24" MG " MG " MG " MG " MG " MG 450 H B DN D BW H2 Side view gear operator P L FIG CLASS 300 2" LEVER 3" LEVER 4" MG 984/S 6" MG 987/S 8" MG " MG " MG " MG " MG " MG 250/80 20" MG " MG " MG " MG " MG " MG " RG 3800 H B Gear operator D BW S1 DN
11 FIG CLASS 600 Hand lever E 2" LEVER 3" LEVER 4" MG 987 6" MG 50 8" MG " MG " MG " MG 250/80 16" MG " MG " MG " MG550/115 26" MG " MG " RG " RG " RG 3800 H B DN D BW H2 Side view gear operator P FIG CLASS 900 L 2" LEVER 3" MG 50 4" MG 50 6" MG 150 8" MG " MG " MG 250/80 14" MG 250/80 16" MG 550 Gear operator S1 H D DN FIG CLASS " LEVER 3" MG 50 4" MG 50 6" MG 150 8" MG " MG 250/80 12" MG " MG " MG 550 B BW
12 Overall Dimensions valves REDUCED BORE FIG CLASS 150 Hand lever E 3"X 2" LEVER 4"X 3" LEVER 6" X 4" LEVER 8"X 6" MG 987/S 10"X 8" MG 50 12"X 8" MG 50 12"X 10" MG "X 10" MG "X 12" MG "X14" MG "X16" MG "X18" MG "X 20" MG 250/80 24"X20" MG 250/80 26"X 24" MG "X 24" MG "X 28" MG "X 28" MG "X 32" MG 450 H B DN D BW Side view gear operator P H2 L S1 FIG CLASS 300 3"X 2" LEVER 4"X 3" LEVER 6" X 4" MG 984/S 8"X 6" MG 987/S 10"X 8" MG "X 8" MG "X 10" MG "X 10" MG "X 12" MG "X14" MG "X16" MG "X18" MG 250/80 22"X 20" MG "X20" MG "X 24" MG "X 24" MG "X 28" MG "X 28" MG "X 32" MG 550 H B D BW DN INCH MILLIMETERS 655 TYPE
13 FIG CLASS 600 Hand lever E 3"X 2" LEVER 4"X 3" LEVER 6" X 4" MG 987 8"X 6" MG 50 10"X 8" MG "X 8" MG "X 10" MG "X 10" MG "X 12" MG "X14" MG 250/80 18"X16" MG "X18" MG "X 20" MG "X20" MG "X 24" MG 550/115 28"X 24" MG "X 28" MG "X 28" MG "X 32" RG 3800 H B DN D BW Side view gear operator P H2 L FIG CLASS 900 S1 3"x 2" LEVER 4"x 3" MG 50 6"x 4" MG 50 8"x 6" MG "x 8" MG "x 10" MG "x 10" MG "x 12" MG 250/80 18"x 14" MG 250/80 20"x 16" MG 550 H B D DN BW FIG CLASS "x 2" LEVER 4"x 3" MG 50 6"x 4" MG 50 8"x 6" MG "x 8" MG "x 10" MG 250/80 14"x 10" MG 250/80 16"x 12" MG "x 14" MG 550
14 Breakway of the ball valve BREAKWAY TORQUE PSI bar N - m ft - Lbs The table shows the breakway of the ball valve Pietro Fiorentini in working conditions at room temperature. For the scaling of the actuator or for the high/low temperature service it is recommended to consider a factor of safety. Breakway torque of reduced bore valves refers to the lower nominal diameter CLASS EXAMPLE: Fig DN 10 Class 600 = 2850 Nm (2100 ft. Ibs) Fig DN 12 x10 Class 600 = 2850 Nm (2100 ft. Ibs)
15 REFERENCE STANDARD ASTM ASME NACE MR API Spec. 6D Spec. RP-6FA Std. 607 Std. 598 American Society for Testing and Materials American Society of Mechanical Engineers National Association of Corrosion Engineers Sulfide Stress Cracking Resistant material For Oil Field Equipment American Petroleum Institute Specification for pipeline valves Recommended Practice for Fire Test for Valves Fire test for soft-seated quater turn valves Valve Inspection and Test ANSI American National Standard Institute B16.5 Steel Pipe Flanges and Flanged Fittings B16.10 Face to Face and End to End Dimension of Ferrous Valves B16.25 Butt-Welding End B16.34 Steel Valves B31.8 Gas Transmission and Distribution Piping System MSS-SP SP6 SP25 SP61 SP72 Manufacturers Standardization Society of the valve Fitting industry Standard Finisch for Contact Face of Pipe Flangers and Connecting End Flanges of Valves and Fittings Standard marking System for Valves Fittings Flanges and Unions Hydrostatic Testing of Steel Valves Ball Valves with Flanged or Butt Welding Ends for general service BRITISH STANDARD BS4504 BS5351 BS6755 Flanges and Bolting for pipes, Valves and Fittings Steel ball Valves for the Petroleum Petrochemicals and Allied Industries Testing of Valves Part. 1 Specification for production Pressure Testing Requirements Part. 2 Specification for Fire Type - Testing Requirements
16 Pietro Fiorentini Solutions Trunnion HIPPS Pressure reducing stations Pietro Fiorentini S.p.A. via E.Fermi 8/10 I Arcugnano (VI) Italy Tel Fax via Rosellini 1 I Milano Italy Tel Fax The data contained is not binding. We reserve the right to changes without prior notice. CT-s519-E February 13
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling:
Company Profile RMT operates in field of manufacturing steel valves of high technology for oil, gas petrochemical and power generation. RMT is located in Italy in the town of Solbiate Olona, just north
Technical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
TECHNICAL. information
TECNICAL information Materials Sealing Seals materials are selected according to the service of the valve and leakage requirement. Zero leakage is easier obtained by softer seals, while the resistance
BALL VALVES SIDE ENTRY TOP ENTRY
SIDE ENTRY TOP ENTRY Quality System AST S.p.A. applies efficient and useful policies aimed at ensuring the quality of the products. The high quality level system implemented within the Company ensures
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
BAF BALL VALVES CATALOGUE
BAF BALL VALVES CATALOGUE for best invalvement 1 BAF BALL VALVES CATALOGUE Index About BAF Valves 3 Certificates 4 BAF Companies 5 Features 6 Applications 6 BAF Floating Ball Valves 7 Part list 8 Pressure
API 6D. Trunnion Mounted Ball Valves. Delta Pacific Valve Mfg. Co. New York, U.S.A.
API 6D Trunnion Mounted Ball Valves Delta Pacific Valve Mfg. Co. New York, U.S.A. TABLE OF CONTENTS Page Title Page Title 1 Table of Contents / How To Order 13 Flange Dimensions ANSI Class 150/300 2 Company
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
V&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 10 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
PLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
LEAKAGE ACCEPTANCE RATES COMPARISON METAL & SOFT SEATED VALVES API 598/API 6D/MSS SP-61/FCI 70-2
ADELAIDE BRISBANE PERTH LEAKAGE ACCEPTANCE RATES COMPARISON METAL & SOFT SEATED VALVES API 598/API 6D/MSS SP61/FCI TESTING & LEAKAGE RATES OVERVIEW From an engineering point of view, almost all valves
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
RMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
VALVEWORKS USA OPERATION AND SERVICE MANUAL FOR MODEL FM 2 4-1/16 GATE VALVE
OPERATION AND SERVICE MANUAL FOR MODEL FM 2 4-1/16 GATE VALVE INTRODUCTION In appreciation to our customer for purchasing our product, we have prepared this Operation Manual to assist you in the Operation,
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
CCI 100 DPC DRAG Wellhead Production Choke Valve
CCI 100 DPC DRAG Wellhead Production Choke Valve 2 Severe service DRAG choke valve delivers precise wellhead pressure control with superior reliability and life. Improves well production time Enhances
Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
Packing and gaskets Page 029 of 040
Packing and gaskets Page 029 of 040 7.3 Packing and gaskets The chemical industry has carried out cadastral surveys for many years. These surveys provide valuable information regarding environmental pollution
KF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions
4057250/8 IM-P405-16 AB Issue 8 ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Operation
TECHNICAL BULLETIN. Serck Audco Iron Taper Plug Valve. Experience in Motion Experience in Motion SRENTB0002-03 (A4) 02/14
TECHNICAL BULLETIN Serck Audco Iron Taper Plug Valve SRENTB0002-03 (A4) 02/14 Experience in Motion Experience in Motion Range and Index Regular Pattern Short Pattern Standard Type Screwed ends/ Flanged
Crane Cast Steel Valves
Crane Cast Valves Cast Valves General Index Ordering Information... 4 Materials... 5 General Data... 6 Identification... 7 General Features... 8 Gate Valve Features... 9 NACE Trim Valves...13 Globe Valve
Indirect fired heaters
Indirect fired heaters Indirect Fired Heaters General INDIRECT BATH HEATERS have a wide variety of successful applications in the oil and gas production, processing and transmission industry. Some of the
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
6D 23 rd Edition, April 2008 Specification for Pipeline Valves
Handbook API Specification 6D 23 rd Edition, April 2008 National Adoption of ISO 14313 Petroleum and natural gas industries Pipeline transportation systems Pipeline valves API Monogram Required Yes No
The First Choice in Secondary Valves. GREENWOOD VALVES
The First Choice in Secondary Valves. GREENWOOD VALVES QUALITY SERVICE Over sixty-five years of continuous service to the oil, gas and energy industry testifies to Greenwood Valves distinguished tradition
Wafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
MADE IN THE USA BALL VA LV ES
MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7
Volkswagen Jetta, Golf, GTI 1999, 2000 2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)
17 Engine-Lubrication (Page GR-17) Lubrication system components, removing and installing Oil filter housing, disassembling and assembling Oil pan, removing and installing Oil pressure and oil pressure
A global supplier of quality instrumentation/piping specification valves through product design and reliability for total customer satisfaction
Made in Britain Valves and Manifolds Double Block and Bleed Valves Monoflange Valve Chart Recorders Calibration Equipment Positioners Accessories A global supplier of quality instrumentation/piping specification
Check Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
Trunnion-Design Ball Valves
Trunnion-Design Ball Valves 12" 20" (DN 300 500) Series 7150 12" (DN 300) Series 730S 12" 20" (DN 300 500) Series 7300 14" 24" (DN 350 600) Series 9150 14" 24" (DN 350 600) Series 9300 Installation, Maintenance
Fisher CV500 Rotary Globe Control Valve
Instruction Manual CV500 Valve Fisher CV500 Rotary Globe Control Valve Contents Introduction... 1 Scope of Manual... 1 Description... 1 Specifications... 2 Educational Services... 2 Installation... 3 Maintenance...
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
BALL VALVE Installation and Operations Maintenance Manual
VALVTECHNOLOGIES, INC. BALL VALVE Installation and Operations Maintenance Manual Page TABLE OF CONTENTS I. INTRODUCTION 3 PRODUCT DESCRIPTION 4 PART NUMBERING SYSTEM 5 II. INSTALLATION 6 RECEIVING & PREPARATION
Types 66R and 66RR Low-Pressure Relief Valves
November 2009 Types 66R and 66RR Low-Pressure Relief Valves W1953 W1908 TYPE 66R RELIEF VALVE TYPE 66RR RELIEF VALVE Figure 1. Typical Constructions Introduction Types 66R and 66RR low-pressure throttling
Metal Seated Ball Valves
Tech Bulletin Page 130-11 Metal ed Ball Valves Engineered Valves for Severe Service Reliability with Innovative Process Solutions Severe Series Extreme Series Shut-Off Class IV, V & VI Automated Metal
VAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
Fisher V500 Rotary Globe Control Valve
V500 Valve D100054012 Product Bulletin Fisher V500 Rotary Globe Control Valve The Fisher V500 eccentric plug rotary control valve controls erosive, coking, and other hard-to-handle fluids, providing either
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
Baumann 24000SB Barstock Control Valve
Instruction Manual 24000SB Valve Baumann 24000SB Barstock Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Disassembly...
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Fisher EDR and ETR easy-e Valves
Instruction Manual EDR and ETR Valves Fisher EDR and ETR easy-e Valves Contents Introduction... Scope of Manual... Description... Specifications... 2 Educational Services... 2 Installation... 4 Maintenance...
Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
Liquefied Natural Gas. Valves, Actuators & Special Solutions
Liquefied Natural Gas Valves, Actuators & Special Solutions Habonim is a leading manufacturer of ball valves & pneumatic actuators. With over 50 years experience, the company enjoys a worldwide reputation
Baumann 81000 Mikroseal Control Valve
Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
RING TYPE JOINT GASKETS
RING TYPE JOINT GASKETS 05.07 GLOBAL RESOURCE FLEXITALLIC, A WORLDWIDE ORGANIZATION LOCAL SERVICE COMMITTED TO MEETING CUSTOMER NEEDS COMPREHENSIVE PRODUCT RANGE FOR ALL INDUSTRIAL AND PETROCHEMICAL APPLICATIONS
Installation, Operating and Maintenance Instructions for AEON Metal Seated Gate Valve (MSGV) Water
1 Foreword 1.1 Thank you for choosing one of the range of AEON's BS standard valves. For safety purposes, the user shall read this instruction to fully understand the operation of the product. 2 AEON Design
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
Ventilstandarder ett urval av standarder
EN 19:2002 EN 558:2008+A1:2011 EN 593:2009+A1:2011 EN 736-1:1995 EN 736-2:1997 EN 736-3:2008 EN 1074-1:2000 EN 1074-2:2000, A1:2004 EN 1074-3:2000 EN 1074-4:2000 EN 1075-5:2001 EN 1074-6:2008 EN 1171:2002
High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
Installation, Operation and Maintenance Manual for Pilot Operated Valves
Installation, Operation and Maintenance Manual for Pilot Operated Valves Models 1400, 1420, 1430, 1460 IOM1400.0 January 2, 2014 REV A 12393 REF. ID 98136 IOM1400.0 REV. A 12541 TABLE OF CONTENTS DESCRIPTION
167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap
1263050/6 IM-P126-07 ST Issue 6 BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation
OPERATION AND MAINTENANCE MANUAL 5-1/4 B-84-B-5 FIRE HYDRANT
OPERATION AND MAINTENANCE MANUAL 5-1/4 B-84-B-5 FIRE HYDRANT INDEX AMERICAN - DARLING 5-1/4 IN. B-84-B-5 FIRE HYDRANT OPERATION AND MAINTENANCE MANUAL OPERATION AND MAINTENANCE REPAIRS Operation and Maintenance...