PARALLEL PORT BREAKOUT BOARD WITH BUFFER OUTPUT FOR CNC & ROUTERS
|
|
|
- Spencer Wilson
- 9 years ago
- Views:
Transcription
1 PARALLEL PORT BREAKOUT BOARD WITH BUFFER OUTPUT FOR CNC & ROUTERS Parallel port I/O break out board designed for Hobby CNC, Routers and Motion controller, This Board is an easy solution to driver stepper Motor driver, AC Servo (with Step-DIR Driver) and DC servo (with StepDIR Driver), The Board is compatible with various CNC software specially made for LPT port data out. The board has been tested with MACH3 CNC software. All outputs are buffered, all inputs are optical isolated and can be used as emergency switch, limit switch and home switch. The board has 12 output pins that can control various devices such as stepping motor drivers, AC Servo Driver, DC Servo Driver, Plasma Torch, Pump for coolant, spindle, 5 Input pins are provided for limit or home switches, feedbacks, Emergency switch. All inputs has 470E for current controlled and TTL Voltage input required driving the inputs. This board can be powered with USB input or DC input supply 7V to 36V, keep jumper J2 open in case of USB supply input. Board has Screw Terminals for Inputs and out connections and also provided with 4X6Pin header connecters for outputs. J15 is connected directly to parallel port pins for testing purpose. Note: Change the value of R3, R4, R5, R6, and R7 to 2K2 Ohms for 24V signal input. Features Supply 7V to 36V DC 25 D SUB Female Connecter for PC LPT Port Interface On Board Power LED On Board USB Connector for Supply from PC or other USB source Jumper Selection for USB Supply Input or External Supply All Outputs are buffered All inputs are optically isolated Two Options for Outputs, Screw Terminals and Header Connectors 4X6Pin Header for easy motor driver interface On Board L317 Regulator for Heat sink for regulator Output for External Circuits 3X3 Header Connector for Relay Driver for Spindle, Plasma, Laser, Pump ON/OFF Author Rajkumar Sharma
2 Author Rajkumar Sharma
3 Connectors and Connections CN15 : LPT Port Test Pins CN7 : Inputs, Limit Switch, Feedback, Home Switch, Emergency Switch CN1 : DC Supply Input 7V to 36V CN2 : DC 5V Output CN10, CN11, CN12, CN13 : Header Connector for Stepper driver Interface CN8, CN9, CN14 : 3X3Pin Header Connector to driver Relay for Outputs CN5 : Outputs J3 : E Stop Optional Jumper for Test Purpose J4, J5 : I/O Direction Control ( Jumper Close to VCC for Normal Operation) CN6 : USB Connecter for VCC Supply input ( Keep Jumper J1 Open for USB Supply Input) D1: Power LED LPT PORT I/O PIN NO I/O FUNCTION DESCRIPTION 1 Output Control ( Enable, Relay, Spindle, Pump) 2 Output Step, Dir, Control 3 Output Step, Dir, Control 4 Output Step, Dir, Control 5 Output Step, Dir, Control 6 Output Step, Dir, Control 7 Output Step, Dir, Control 8 Output Step, Dir, Control 9 Output Step, Dir, Control 10 Input E-Stop, Home Switch, Limit Switch 11 Input E-Stop, Home Switch, Limit Switch 12 Input E-Stop, Home Switch, Limit Switch 13 Input E-Stop, Home Switch, Limit Switch 14 Output Control ( Enable, Relay, Spindle, Pump) 15 Input E-Stop, Home Switch, Limit Switch 16 Output Control ( Enable, Relay, Spindle, Pump) 17 Output Control ( Enable, Relay, Spindle, Pump) Author Rajkumar Sharma
4 TOP BOTTOM BOM SR. QNTY. REF. DESC. 1 2 CN1,CN2 2 PIN SCREW TERMINAL 2 1 CN3 DB-25 FEMALE 3 1 CN4 2 PIN HEADER CONNECTOR 4 1 CN5 13 PIN SCREW TERMINAL 5 1 CN6 USB CONNECTOR B TYPE 6 1 CN7 6 PIN SCREW TERMINAL 7 1 CN8 3 PIN HEADER CONNECTOR 8 2 CN9,CN14 3 PIN HEADER CONNECTOR 9 1 CN10 6 PIN HEADER CONNECTOR 10 1 CN11 6 PIN HEADER CONNECTOR 11 1 CN12 6 PIN HEADER CONNECTOR 12 1 CN13 6 PIN HEADER CONNECTOR 13 2 C1,C2 0.1uF 14 2 C3,C4 10uF/63V 15 1 D1 LED GREEN 3MM 16 1 J2 2 PIN HEADER & JUMPER CLOSURE 17 1 J3 2 PIN HEADER CONNECTOR 18 2 J4,J5 3 PIN JUMPER WITH CLOSURE 19 1 RN3 4.7K 8-R PACK 20 1 R1 220E 21 1 R2 680E 22 8 R3,R4,R5,R6,R7,R8,R9,R10 470E 23 1 U1 LM U4,U5,U6,U7,U8 PC U9,U10 74HC CP 0.1UF SMD SC 20 PIN DIP IC SOCKET 28 1 CN15 19 PIN HEADER CONNECTOR Author Rajkumar Sharma
5 PIN 14,16,17 OUTPUTS CAN BE USED AS RELAY DRIVER, SPINDLE, PLASMA TORCH PIN1-ENBALE PIN8-STEP/DIR LPT PIN 17 LPT PIN 16 LPT PIN 15 LPT PIN 14 PIN9-STEP/DIR PIN 6-STEP/DIR LPT PIN 13 LPT PIN 12 LPT PIN 11 LPT PIN 10 LPT PIN 9 LPT PIN 8 PIN 6-STEP/DIR 4-STEP/DIR LPT PIN 7 LPT PIN 6 5-STEP/DIR LPT PIN 5 LPT PIN 4 LPT PIN 3 LPT PIN 2 PIN 6-STEP/DIR 2-STEP/DIR LPT PIN 1 PIN3-STEP/DIR PIN 13 5V INPUT DC PIN 12 5V INPUT DC PIN 11 5V INPUT DC PIN 10 5V INPUT DC PIN 15 5V INPUT DC OUTPUT FOR LIMIT/SENSORS INPUT PINS OUT PUT PINS 7-36V DC SUPPLY INPUT OUT PUT Author Rajkumar Sharma
UIM2901-5A MACH3 breakout board
User Manual UIM2901-5A MACH3 Breakout Board UIM2901-5A MACH3 Breakout Board UIM2901-5A MACH3 breakout board Features General DB25 interface between PC and user device Fully buffered opto-isolated I/O (Input
SYSTEM 45. C R H Electronics Design
SYSTEM 45 C R H Electronics Design SYSTEM 45 All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, & A outputs. Independent 25
Mini Breakout-Board. CNC Interface for LPT Port. Installation Manual Version 4
Mini CNC Interface for LPT Port Version 4 Product Brief This breakout-board is designed to connect up to four stepper or servo drives to the parallel port of a PC. This requires the use of a CNC controller
SYSTEM 4C. C R H Electronics Design
SYSTEM 4C C R H Electronics Design SYSTEM 4C All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, A outputs. Independent 25
3.5 AMP CONTROLLERS AND MOTORS SilverSterling 3.5 Amp QCI-S2-IG Controller/Drivers
Date: 5 May 2014 WWW.QUICKSILVERCONTROLS.COM Price List Notes RoHS available on most products. Check website or call for a list of compliant products. Prices subject to change without notice. QuickSilver
MANUAL FOR BREAKOUT BOARD HG06
MANUAL FOR BREAKOUT BOARD HG06 INFORMATION IS SPECIFIC TO OUR PRODUCTS AND CAN CAUSE DAMAGE IF USED WITH NONE COMPATIBLE PRODUCTS SO PLEASE CHECK WITH YOUR SUPPLIER FOR COMPATIBILITY These drawings are
MOTION COORDINATOR MC206X Quick Connection Guide
I/O Connector 1 Analogue In / Inputs 0-7 5 Way Connector Power /CANbus I/O Connector 2 24V Power / I/O 8-15 I/O Connector 3 WDOG / Ref Encoder / Analogue Outputs USB Serial A Serial B Axes 0-3 Encoder
PolyBot Board. User's Guide V1.11 9/20/08
PolyBot Board User's Guide V1.11 9/20/08 PolyBot Board v1.1 16 pin LCD connector 4-pin SPI port (can be used as digital I/O) 10 Analog inputs +5V GND GND JP_PWR 3-pin logic power jumper (short top 2 pins
Mach3 Tutorial Setting up a basic three axis milling machine. Based on Mach3 2.0
Mach3 Tutorial Setting up a basic three axis milling machine. Based on Mach3 2.0 Purpose. The purpose of this tutorial is to help and to guide the user to, step by step, set up and tune the Mach3 CNC controller
Microstep Driver Manual Version 6/13/2006
Microstep Driver Manual Version 6/13/2006 Embedded Acquisition Systems 2517 Cobden Street Sterling Heights, MI 48310 http://www.embeddedtronics.com email [email protected] copyright 2003-2004 EAS
CNC USB Controller Mk1
CNC USB Controller Mk1 User manual 2014-10-19 Disclaimer CONTROLLER AND CONTROLLER SOFTWARE ARE PROVIDED TO YOU "AS IS," WITHOUTWARRANTY. THERE IS NO WARRANTY FOR THE CONTROLLER AND CONTROLLERSOFTWARE,
Current plugin version: V2.145
UC100 USB CNC motion controller to use with MACH3 software Current plugin version: V2.145 Contents: 1. Product description and background of working. 2. Installation of the USB drivers and the plugin.
Three Axis TB6560 CNC Driver Users Manual
Three Axis TB6560 CNC Driver Users Manual Revision 2.0 Oct. 16. 2009 1 Content 1. GENERAL INFORMATION... 3 1.1. Scope... 3 1.2. General Description... 3 2. Descriptions of 3-AXIS CNC Board... 3 2.1. Photo
CNC-IN http://stores.ebay.com.hk/verycnc Email:[email protected] tel:+8613937119428. Instruction
SINYU 5 Axis CNC interface board Ver 1.0 Instruction Please read thid instruction before you use the interface board -1- Characters and Features 5 Axis CNC interface board (Ver1.0) with perfect design
XBee USB Adapter Board (#32400)
Web Site: www.parallax.com Forums: forums.parallax.com Sales: [email protected] Technical: [email protected] Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
Mach3 Sample Configuration with 3 Axis and PWM Spindle Speed Using a Single Parallel Port
1.0 Preface This document is NOT a complete Mach3 tutorial. Users of this document should be familiar with how to run the Mach3 operation and configuration interfaces. We recommend that you review the
Operation Manual. Model : Compact THC Controller SD. ( Step / Dir PID generator) A new generation height controller of plasma torach
Operation Manual A new generation height controller of plasma torach Model : Compact THC Controller SD ( Step / Dir PID generator) Notes on safety WHEN THE DEVICE IS IN OPERATION, VOLTAGE HAZARDOUS TO
XS-3525/8S-3. Preliminary DataSheet Version 2.02
XS-3525/8S-3 Preliminary DataSheet Version 2.02 X The XS-3525/8S-3 microstepping stepper motor driver is the perfect choice for CNC retrofitting of desktop and small benchtop milling machines. Connect
revolution Contents: Introduction Power 28-pin Project Board with input/output cables
28-PIN IN IN PROJECT BOARD Contents: AXE020 28-pin Project Board with input/output cables Introduction The 28-pin project board is designed to allow rapid prototyping with 28-pin PICAXE microcontrollers.
Datasheet of the Easy Servo Drive ES-D808. 24-75VDC, 8.2A Peak, Close-loop, No Tuning. Version 0.1.0. http://www.leadshine.com
Datasheet of the Easy Servo Drive ES-D808 4-75VDC, 8.A Peak, Close-loop, No Tuning Version 0.1.0 http://www.leadshine.com Features Step and direction control Closed position loop for no loss of movement
Pololu DRV8835 Dual Motor Driver Shield for Arduino
Pololu DRV8835 Dual Motor Driver Shield for Arduino Pololu DRV8835 Dual Motor Driver Shield for Arduino, bottom view with dimensions. Overview This motor driver shield and its corresponding Arduino library
CAUTION! THE 7I29 USES VOLTAGE AND POWER LEVELS THAT REPRESENT A HAZARD TO LIFE AND LIMB.
7I29 MANUAL Rev 1.5 CAUTION! THE 7I29 USES VOLTAGE AND POWER LEVELS THAT REPRESENT A HAZARD TO LIFE AND LIMB. THE 7I29 IS INTENDED FOR USE BY OEMS THAT WILL INTEGRATE IT INTO A SYSTEM WITH INTERLOCKS AND
Four/Five Axis TB6560 CNC Driver Users Manual
Four/Five Axis TB6560 CNC Driver Users Manual Revision 2.0. Oct. 16. 2009 1 Content 1. GENERAL INFORMATION... 3 1.1. Scope... 3 1.2. General Description... 3 1.3. Key Features... 3 2. Descriptions of 4/5-AXIS
PCAN-MicroMod Evaluation Test and Development Environment for the PCAN-MicroMod. User Manual. Document version 2.0.1 (2013-08-06)
PCAN-MicroMod Evaluation Test and Development Environment for the PCAN-MicroMod User Manual Document version.0. (0-0-0) Products taken into account Product Name Part number Model PCAN-MicroMod Evaluation
Whale 3. User Manual and Installation Guide. DC Servo drive. Contents. 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty.
Whale 3 DC Servo drive User Manual and Installation Guide Contents 1. Safety, policy and warranty. 1.1. Safety notes. 1.2. Policy. 1.3. Warranty. 2. Electric specifications. 2.1.Operation ranges. 3. Connections
WICE-SPI Hardware Operation Manual
Contents 1.Hardware Instruction...1 2. Pin Definition Of WICE-SPI Connector...2 3. Peripheral Circuit Arrangements...3 4. On-Board Programming...4 5. Off-Line Programming...8 1.Hardware Instruction 1.WICE-SPI
Ocean Controls RC Servo Motor Controller
Ocean Controls RC Servo Motor Controller RC Servo Motors: RC Servo motors are used in radio-controlled model cars and planes, robotics, special effects, test equipment and industrial automation. At the
MESA ELECTRONICS PRICE LIST 9/15/15
PC/104 CARDS: 4A23 20 bit delta-sigma isolated input A-D 257 206 195 186 4A24-2 High speed 16 bit A-D 200KHz 257 206 195 186 4A24-5 High speed 16 bit A-D 500KHz 314 251 239 227 4I20 24 output 48V/350 ma
Options for ABB drives, converters and inverters. User s manual FDPI-02 diagnostics and panel interface
Options for ABB drives, converters and inverters User s manual FDPI-02 diagnostics and panel interface Table of contents Table of contents 3 1. FDPI-02 diagnostics and panel interface Safety..............................................
DMX-K-DRV. Integrated Step Motor Driver + (Basic Controller) Manual
DMX-K-DRV Integrated Step Motor Driver + (Basic Controller) Manual DMX-K-DRV Manual page 1 rev 1.33 COPYRIGHT 2007 ARCUS, ALL RIGHTS RESERVED First edition, June 2007 ARCUS TECHNOLOGY copyrights this document.
ABB Drives. User s Manual HTL Encoder Interface FEN-31
ABB Drives User s Manual HTL Encoder Interface FEN-31 HTL Encoder Interface FEN-31 User s Manual 3AUA0000031044 Rev B EN EFFECTIVE: 2010-04-06 2010 ABB Oy. All Rights Reserved. 5 Safety instructions
MFRD52x. Mifare Contactless Smart Card Reader Reference Design. Document information
Rev. 2.1 17. April 2007 Preliminary Data Sheet Document information Info Keywords Content MFRC522, MFRC523, MFRC52x, MFRD522, MFRD523, Mifare Contactless Smart Card Reader Reference Design, Mifare Reader
USB I/O CONTROL BOX 8 relays, 8 digital I/O lines and 8 HV inputs
USB I/O CONTROL BOX 8 relays, 8 digital I/O lines and 8 HV inputs The Big Deal USB HID device compatible with 32/64 Bit operating systems 8 TTL/LVTTL digital I/O channels, 8 High Voltage digital inputs
Real Time Clock USB Evaluation Board V3.0
Real Time Clock USB Evaluation Board V.0 Application Note February 9, 008 RTC EVB Intersil RTC Devices Supported Introduction This evaluation board provides a platform for testing Intersil Real Time Clock
BrightSign Expander Hardware Guide
Hardware Guide PCBA: Rev C Version: 0.1 Saratoga, CA, USA 1 Table of Contents OVERVIEW... 3 EXPANDER BLOCK DIAGRAM... 4 PORTS... 6 POWER CONNECTOR... 6 OPTICAL SPDIF CONNECTOR... 6 DB25 SWITCH/LED CONNECTOR...
mach3 cnc Stepper Motor Controller operation instruction ST6560-T3 3axis mach3 cnc
ST6560-T3 3axis mach3 cnc Stepper Motor Controller operation instruction 1 Content ST6560-T3 3axis...1 I. features of ST6560-T3...3 Ⅱ Applications:...3 Ⅲ Electrical drawing...4 V. Definition on pins of
Datasheet of the Easy Servo Motor ES-MH Series
Datasheet of the Easy Servo Motor ES-MH Series High Voltage Stepper Motor with Encoder, 8-20 Nm Version 1.4 http://www.leadshine.com Descriptions Leadshine s ES-MH series easy servo motors, or stepping
How To Build A Prototyg Carrier Board For Industrial Use
Rev 1.05 as of 2012-04-11 Trenz Electronic GmbH [email protected] www.trenz-electronic.de Prototyg Carrier Board for Industrial Micromodule Overview The Prototyg Carrier Board provides low-cost
Advanced Data Capture and Control Systems
Advanced Data Capture and Control Systems Tronisoft Limited Email: [email protected] Web: www.tronisoft.com RS232 To 3.3V TTL User Guide RS232 to 3.3V TTL Signal Converter Modules P/N: 9651 Document
ABB Drives. User s Manual. Pulse Encoder Interface Module RTAC-01
ABB Drives User s Manual Pulse Encoder Interface Module RTAC-0 Pulse Encoder Interface Module RTAC-0 User s Manual 3AFE 64486853 REV A EN EFFECTIVE:.5.00 00 ABB Oy. All Rights Reserved. Safety instructions
Table of Contents Getting Started... 3 The Motors... 4 The Control Board... 5 Setting up the Computer with Mach3... 6 Starting up the Equipment...
User Manual Table of Contents Getting Started... 3 The Motors... 4 The Control Board... 5 Setting up the Computer with Mach3... 6 Starting up the Equipment... 12 G-Code Example... 13 2 Getting Started
TEECES DOME LIGHTING SYSTEMS
This lighting system was designed by John V (Teeces) to be a simple, customizable, expandable and affordable solution for dome lighting. An Arduino micro-controller is used to tell LED driver chips which
Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science 6.115 Microprocessor Project Laboratory
Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science 6.115 Microprocessor Project Laboratory Connecting your PSoC Evaluation Board It is easy and fun to avoid
IEEE P802.3af DTE Power via MDI Task Force Presentation Phil Holland [email protected]
DC Power Discovery Algorithm IEEE P802.3af DTE Power via MDI Task Force Presentation Phil Holland [email protected] Contents Design Considerations Based on the DTE Power via MDI Task Force Objectives
ALL-USB-RS422/485. User Manual. USB to Serial Converter RS422/485. ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten
ALL-USB-RS422/485 USB to Serial Converter RS422/485 User Manual ALL-USB-RS422/485 USB to RS-422/485 Plugin Adapter This mini ALL-USB-RS422/485 is a surge and static protected USB to RS-422/485 Plugin Adapter.
Actuator cable (LE-C - - ) Controller Power supply plug (usually inserted into socket CN1 of the controller when shipped)
4 5 Actuator I/O cable (LEC-CN5- ) Actuator cable (LE-C - - ) Controller 4 5 Power supply plug (usually inserted into socket CN of the controller when shipped) I/O cable (LEC-CN5- ) Power Supply Plug Actuator
Analog Laser Diode Setup for Gray Scale Image Engraving
Analog Laser Diode Setup for Gray Scale Image Engraving www.picengrave.com A special appreciation goes to Mr. Jeff Woodcock, and his son Jeffery, for their assistance and photos. ---------------------------------------------------------------This
RC2200DK Demonstration Kit User Manual
Demonstration Kit User Manual Table of contents TABLE OF CONTENTS... 1 QUICK INTRODUCTION... 2 INTRODUCTION... 3 DEMONSTRATION BOARD... 4 POWER SUPPLY SECTION... 5 RS-232 INTERFACE... 6 CONNECTORS... 7
Datasheet of the Easy Servo Motor ES-M Series
Datasheet of the Easy Servo Motor ES-M Series Stepper Motor with Encoder, 0.9-8 Nm Version 1.3 http://www.leadshine.com Descriptions Leadshine s ES-M series easy servo motors, or stepper motors with encoders,
USB to RS-422/485 Serial Adapter
USB to RS-422/485 Serial Adapter User Manual Ver. 2.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2
INDEX. Trademarks All name and product s trademarks mentioned below are the property of their respective companies.
USB2.0 EASY IDE ADAPTER INDEX Trademarks ---------------------------------------------------------------------------- Introduction ---------------------------------------------------------------------------
Impulse G+/VG+ Series 3, 24 VDC Interface Card Terminal Designations
Impulse G+/VG+ Series 3, 24 VDC Interface Card Terminal Designations Addendum to: IMPULSE G+ Series 3 Manual (140-10258) IMPULSE VG+ Series 3 Manual (140-10257) This addendum should be used when a 24VDC
X2 LR Optical Transponder, 10Km Reach
X2 LR Optical Transponder, 10Km Reach Features Compatible with X2 MSA Rev2.0b Support of IEEE 802.3ae 10GBASE-LR at 10.3125Gbps Transmission Distance up to 10km(SMF) SC Receptacle 1310nm DFB Laser SC Duplex
Operation Manual. Plasma torch height controller. Model: Compact THC Controller 150
Operation Manual Plasma torch height controller. Model: Compact THC Controller 150 Notes on safety WHEN THE DEVICE IS IN OPERATION, VOLTAGE HAZARDOUS TO HEALTH AND HUMAN LIFE IS PRESENT INSIDE THE HOUSING
is then retained absolutely without interruption.
Page 1 of 11 DC UPS uninterruptible power supplies - DC UPS module 15 A Compact design, only 50 mm wide Absolutely interruption-free buffering of power failures through immediate electronic connection
DC Motor Driver 24V 20A [RKI-1340]
![DC Motor Driver 24V 20A [RKI-1340]](/thumbs/40/21821300.jpg "DC Motor Driver 24V 20A [RKI-1340]")
DC Motor Driver 24V 20A [RKI-1340] Users Manual Robokits India [email protected] http://www.robokitsworld.com Page 1 Add raw power and simple connectivity to your robotics applications with this 24V
Pmod peripheral modules are powered by the host via the interface s power and ground pins.
Digilent Pmod Interface Specification Revision: November 20, 2011 1300 NE Henley Court, Suite 3 Pullman, WA 99163 (509) 334 6306 Voice (509) 334 6300 Fax Introduction The Digilent Pmod interface is used
DOEPFER MIDI TO SYNC INTERFACE MSY2. User's Guide (English)
DOEPFER MIDI TO SYNC INTERFACE MSY2 User's Guide (English) www.doepfer.com INTRODUCTION MSY2 is an interface that converts the MIDI realtime events CLOCK, START and STOP into the corresponding signals
Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller
Fox Delta Amateur Radio Projects & Kits FD- ST1 Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller Introduction to Satellite Antenna Tracking: In view to encourage radio amateurs and
MADR-009443-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators. Functional Schematic. Features. Description. Pin Configuration 2
Features Functional Schematic High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost 4x4 mm, 20-lead PQFN Package 100% Matte
PIKA Technical Bulletin #41. V-12 RAN Trunk Interface Implementation
PIKA Technical Bulletin #41 V-12 RAN Trunk Interface Implementation Supported by: model V-12 FORMULA with FSB 045 V-12 RAN MODIFICATION External Power supply requirements: -48VDC. RAN trunks are based
MD10C Enhanced 10Amp DC Motor Driver
MD10C Enhanced 10Amp DC Motor Driver User s Manual Rev2.0 V1.0 February 2013 Information contained in this publication regarding device applications and the like is intended through suggestion only and
SIMPLE EPROM PROGRAMMER. EPROM Programmer Design. Hardware
Page 1 of 5 A simple EPROM programmer is described here. It connects to a PC's parallel port and can program EPROMs from 2716 to 27512. The design can be expanded to program even larger EPROMs. DOS based
Evo Laser Firmware Developer s Manual
Evo Laser Firmware Developer s Manual Table of Content Chapter 1 Introduction Chapter 2 Hardware Overview and Subsystems 2.1 Overview 2.2 Evo Laser Hardware Core System 2.3 Evo Laser Smartport TM Chapter
RPLIDAR. Low Cost 360 degree 2D Laser Scanner (LIDAR) System Development Kit User Manual. 2014-2 Rev.1
RPLIDAR Low Cost 360 degree 2D Laser Scanner (LIDAR) Development Kit User Manual 2014-2 Rev.1 Team Contents: 1. OVERVIEW... 2 ITEMS IN DEVELOPMENT KIT... 2 RPLIDAR... 2 USB ADAPTER... 3 2. CONNECTION AND
Quick Start Guide for High Voltage Solar Inverter DC-AC Board EVM. Version 1.3
Quick Start Guide for High Voltage Solar Inverter DC-AC Board EVM Version 1.3 Introduction This document talks about the quick start principles for the high voltage solar inverter DC-AC board. From this
Digital I/O: OUTPUT: Basic, Count, Count+, Smart+
Digital I/O: OUTPUT: Basic, Count, Count+, Smart+ The digital I/O option port in the 4-Series provides us with 4 optically isolated inputs and 4 optically isolated outputs. All power is supplied externally.
TEST CHAPTERS 1 & 2 OPERATING SYSTEMS
TEST CHAPTERS 1 & 2 OPERATING SYSTEMS True/False Indicate whether the statement is true or false. 1. Changes that you make in virtual machines do not affect your physical computer. 2. The size of a bus
STEPPER MOTOR SPEED AND POSITION CONTROL
STEPPER MOTOR SPEED AND POSITION CONTROL Group 8: Subash Anigandla Hemanth Rachakonda Bala Subramanyam Yannam Sri Divya Krovvidi Instructor: Dr. Jens - Peter Kaps ECE 511 Microprocessors Fall Semester
Arduino Motor Shield (L298) Manual
Arduino Motor Shield (L298) Manual This DFRobot L298 DC motor driver shield uses LG high power H-bridge driver Chip L298P, which is able to drive DC motor, two-phase or four phase stepper motor with a
MC433 Stepper Motor Controller
MC433 Stepper Motor Controller 4 Axis, 10A PWM Hardware Reference Guide PCB Rev 1.1,1.1b MC433 Rev 1-1(b) Hardware Reference Guide Manual Revision 0.95 Warranty Statement SOC Robotics warrants that the
EvB 5.1 v5 User s Guide
EvB 5.1 v5 User s Guide Page 1 Contents Introduction... 4 The EvB 5.1 v5 kit... 5 Power supply...6 Programmer s connector...7 USB Port... 8 RS485 Port...9 LED's...10 Pushbuttons... 11 Potentiometers and
Name Description P/N. Programmer Programmer with calibration function SDD-AAPNP. Parameter Min. Typ. Max. Notes. (Vo+ - Vo-) - Voltage
Description SDD-AAPNP is the programmer for non-dali Inventronics drivers, and the programmer and calibrator for the following intelligent controllers: SDD-AAPNx Dimming Signal Attenuator TDD-ANPNx Combo
Global Motion Technology Inc Web www.motiontek.ca THCSA200. Capacitive sensor plasma & Oxy-fuel Torch Height Control
THCSA200 Capacitive sensor plasma & Oxy-fuel Torch Height Control Features 1) Stand alone controller for THC & OHC completely independent from CNC computer software or CNC control system 2) closed-loop
General Purpose, Interposing, Solid-State and Specialty Relays. Bulletin 700
General Purpose, Interposing, Solid-State and Specialty Relays Bulletin 700 Breadth of Product. Ease of Selection. World-class Allen-Bradley relays and timing relays by Rockwell Automation are designed,
GSM Interfacing Board
Campus Component Pvt. Ltd. DISCLAIMER Information furnished is believed to be accurate and reliable at the time of publication. However, Campus Component Pvt. Ltd. assumes no responsibility arising from
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter Description: The NTE2053 is a CMOS 8 bit successive approximation Analog to Digital converter in a 20 Lead DIP type package which uses a differential
Multilevel Socket Technologies
Multilevel Socket Technologies High Performance IC Sockets And Test Adapters Overview Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs & Turn-Key Solutions
Fanuc 0 M/T Model C Serial (RS232) Connection Guide
Memex Automation Inc., Burlington, Ontario Canada L7N 1 http://www.memex.ca Fanuc 0 M/T Model C Serial (RS232) Connection Guide The Fanuc 0-C control has two RS-232 interfaces. Interface number 1 (M5)
CNC Milling Engraving machine G4030A Instruction manual
CNC Milling Engraving machine G4030A Instruction manual 1. Safety notes Every machine controlled by computer (PC) can be really dangerous for human life and health. Comply with bolow rules and use Your
Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller
Fox Delta Amateur Radio Projects & Kits FD- ST1 Schematic & Parts List: PIC16F688 Satellite Tracker & Rotor Controller Introduction to Satellite Antenna Tracking: The ST1 kit/project was designed as an
Switch board datasheet EB007-00-1
Switch board datasheet EB007-00-1 Contents 1. About this document... 2 2. General information... 3 3. Board layout... 4 4. Testing this product... 5 5. Circuit description... 6 Appendix 1 Circuit diagram
PC FUNCTION GENERATOR
PC FUNCTION GENERATOR Create standard signal waves like e.g. sine, triangle and rectangle are available; other sine waves can be easily created with integrated software. Total solder points: 954 Difficulty
MP-1010 Capture Device USB
MP-1010 Capture Device USB USER MANUAL INTRODUCTION All audio connections are cinch. Use good quality cinch-cinch cables to prevent bad audio quality. After connecting the USB audio converter to the other
40-Segment 2.54 pitch LED Bar Display Board User s Guide
Sure Electronics 0-Segment. pitch LED Bar Display Board User s Guide Product Name Product ID : 0-segment.mm pitch LED Bar Display Board : DE-DP0 Product Version : Ver.0 Document Version : Ver.0 Copyright
LEDs offer a more energy efficient and no radiated heat, no Ultra Violet light solution to replace some halogen lamp applications.
A Product Line of Diodes Incorporated DN96 MR11 LED Lighting application with AL8805 Introduction MR11 lamps are one variety of Multifaceted Reflector (MR) lamps that usually employ a halogen filament
Introducing AVR Dragon
Introducing AVR Dragon ' Front Side Back Side With the AVR Dragon, Atmel has set a new standard for low cost development tools. AVR Dragon supports all programming modes for the Atmel AVR device family.
BUILDING INSTRUCTIONS
etap2hw 38 mm I2C to LCD Interface BUILDING INSTRUCTIONS October 2013 P. Verbruggen Rev 1.01 15-Oct-13 Page 1 Table of Contents Chapter 1 General Information 1.1 ESD Precautions 1.2 Further Supplies 1.3
10GBASE -LRM, 220m Reach GX2-31192-LRMC
Features Compatible with X2 MSA Rev2.0b 10GBASE -LRM, 220m Reach GX2-31192-LRMC Support of IEEE 802.3ae 10GBASE-LR at 10.3125Gbps Transmission Distance up to 220m(MMF) SC Receptacle 1310nm DFB Laser SC
SV 210 Signal Splitter and Incremental Converter for Sine-Cosine Encoders
control motion interface motrona GmbH Zwischen den Wegen 32 78239 Rielasingen - Germany Tel. +49 (0)7731-9332-0 Fax +49 (0)7731-9332-30 [email protected] www.motrona.com SV 210 Signal Splitter and Incremental
User Guide FFFA001106. www.focusrite.com
User Guide FFFA001106 www.focusrite.com TABLE OF CONTENTS OVERVIEW.... 3 Introduction...3 Features.................................................................... 3 Box Contents...3 System Requirements....4
SyncLink GT2/GT4 Serial Adapter
SyncLink GT2/GT4 Serial Adapter Hardware User s Manual MicroGate Systems, Ltd http://www.microgate.com MicroGate and SyncLink are registered trademarks of MicroGate Systems, Ltd. Copyright 2008 2012 MicroGate
Balun Parameter Definitions & Measurement May 2004
Balun Parameter Definitions & Measurement May 2004 Differential circuits are becoming more widely used in RF circuits for the same reason that they have been used for years in lower frequency circuits.
Build A Video Switcher. Reprinted with permission from Electronics Now Magazine September 1997 issue
Build A Video Switcher Reprinted with permission from Electronics Now Magazine September 1997 issue Copyright Gernsback Publications, Inc.,1997 BUILD A VIDEO SWITCHER FRANK MONTEGARI Watch several cameras
Part Number Description Packages available
Features 3 digital I/O Serial Data output Connects directly to RF Modules Easy Enc / Dec Pairing Function Minimal External Components Required Performs all encoding/decoding of data for Reliable Operation.
How To Use An Ams 5812 Pressure Sensor With A Usb Starter Kit
User Guide USB Starter Kit AMS 5812 Phone:+49 (0)6131/91 0730-0 Fax: +49 (0)6131/91 073-30 Internet: E Mail: [email protected] Analog Microelectronics GmbH An der Fahrt 13, D 55124 Mainz May 2012 - Rev.
The modular concept of the MPA-3 system is designed to enable easy accommodation to a huge variety of experimental requirements.
HARDWARE DESCRIPTION The modular concept of the MPA-3 system is designed to enable easy accommodation to a huge variety of experimental requirements. BASE MODULE GO LINE Digital I/O 8 Analog Out AUX 1
ELAN DIGITAL SYSTEMS LTD. SL232 PC- CARD USER S GUIDE
ELAN DIGITAL SYSTEMS LTD. LITTLE PARK FARM ROAD, SEGENSWORTH WEST, FAREHAM, HANTS. PO15 5SJ. TEL: (44) (0)1489 579799 FAX: (44) (0)1489 577516 e-mail: [email protected] website: http://www.pccard.co.uk
DK40 Datasheet & Hardware manual Version 2
DK40 Datasheet & Hardware manual Version 2 IPC@CHIP DK40 Evaluation module Beck IPC GmbH http://www.bcl.de page 1 of 11 Table of contents Table of contents... 2 Basic description... 3 Characteristics...
User s Manual of Board Microcontroller ET-MEGA2560-ADK ET-MEGA2560-ADK
User s Manual of Board Microcontroller ET-MEGA2560-ADK ET-MEGA2560-ADK Because Arduino that is the development project on AVR MCU as Open Source has been published, it is popular and widespread shortly.