3.5 AMP CONTROLLERS AND MOTORS SilverSterling 3.5 Amp QCI-S2-IG Controller/Drivers

Transcription

1 Date: 5 May Price List Notes RoHS available on most products. Check website or call for a list of compliant products. Prices subject to change without notice. QuickSilver Controls is not responsible for typographical errors. Mosolver Hybrid Servo Motor with Integrated Magnetic Feedback Compatible Controller: QCI-S2-IG QCI-MV Eliminates Encoder Emulates Resolver Quiet Operation Physically Robust Motor Memory simplifies installation Cost Effective Compact Includes 12" motor/feedback cable 32,000 counts per revolution Commutation with no start-up wiggle RoHS ; QCI-MV23L-1 Motor with 32,000 CPR feedback QCI-DS029 $ AMP CONTROLLERS AND MOTORS SilverSterling 3.5 Amp QCI-S2-IG Controller/Drivers Recommended Motors: I-Grade Motor/Encoders - QCI-A17x, QCI-A23x, QCI-A24x, QCI-A34L-1 QCI-S2-IG: 3.5 A RMS x 2 Phases 2 input also supports 12 bit analog input 3.5 RMS x 2 phases, 5A peak DMX standard 1 I/O supports PWM output (with Heatsink) Best paired with I-Grade Motor/Encoders Internal feature connector for additional Analog and digital I/O RS485 only CANopen Standard Built in Voltage Clamp and Resistor 8 bit ASCII, 9 bit 32 Kilobytes nonvolatile DB15HD Motor I/F binary or Modbus 1023 Word Program Buffer DB15HD SIP Port protocols 4 TTL I/O external RoHS DESCRI QCI-S2-IG-01 QCI-S2-IG SilverSterling IG, Board Only SilverSterling - Enclosure QCI-DS026 (Requires Heatsink) $ QCI-DS026 In Enclosure $ SilverDust 3.5 Amp I-Grade Controller/Drivers Recommended Motors: I-Grade Motor/Encoders - QCI-A17x, QCI-A23x, QCI-A24x, QCI-A34L-1 QCI-D2 : 3.5 Amp Best paired with I-Grade Motor/Encoders 3.5 Amps per Phase (requires heat sink) RS-232 or RS bit ASCII, 9 bit Voltage Clamp And Resistor 7 TTL I/O R - Right Angle DB15HD J - CANopen - $20 Adder (25C Ambient) binary or Modbus 4 Inputs Double as 4.5 Amp Peak protocols Analog Inputs 0-3.3V Depending on heat 32 Kilobyte nonvolatile DB15HD SMI Port sink (25C ambient) Word Program Buffer DB15HD Motor I/F RoHS except IGB DIN Rail Mountable IG Open Frame IG8 8 I/O IGB IG with Breakout Encoder Output Breakouts for Power, Comm & CANopen Breakouts for Power, Comm & CANopen 8 Additional 5-24V, Isolated I/O 16 Additional 5-24V, Isolated I/O. QCI-D2-IG-01 QCI-D2-IG QCI-D2-IGF QCI-D2-IGK SilverDust IG, Board Only SilverDust IG w/ L-Bracket SilverDust IGF Closed Frame SilverDust IGK Closed Frame with QCI-DS019 QCI-DS019 QCI-DS021 QCI-DS023 (Requires Heatsink) $ $ $ $ QCI-D2-IG8 QCI-D2-IG8-E QCI-D2-IG8-EM QCI-D2-IG8-EMS QCI-D2-IG8-ES QCI-D2-IG8-S SilverDust CAN IG8 SilverDust IG8 with Ethernet SilverDust IG8 with Modbus TCP SilverDust IG8 with Modbus TCP&SSI SilverDust IG8 with Ethernet&SSI SilverDust IG8 with SSI Port QCI-DS018 for all QCI-D2-IG8x $ $ $ $1, $1, $ QCI-D2-IGB -D SilverDust IGB DMX512 Adder QCI-DS003 $ $25.00 Page 1 of 7 Prices subject to change without notice. 5/5/2014

2 I-Grade Motors/Encoders Recommended Controllers: QCI-S2-IGx and QCI-D2-IGx A17x QCI-DS007 Blank Standard 6T IP65 A23x QCI-DS008 DB15HD Motor Interface Connector 14 Pin Round Connector A24X QCI-DS028 Shaft seal required for full IP65 rating. Extra coating on motor exterior. A34L-1 QCI-DS009 DB15HD Motor Interface Connector QCI-A17-1 Motor w/ 8000CPR Enc $ QCI-A17H-3 Motor w/ 8000CPR Enc $ QCI-A23L-1 Motor w/ 8000CPR Enc $ QCI-A23K-3 Motor w/ 8000CPR Enc $ QCI-A23L-3 Motor w/ 8000CPR Enc $ QCI-A23H-5 Motor w/ 8000CPR Enc $ QCI-A24P-6 Motor w/ 8000CPR Enc $ QCI-A34L-1 Motor w/ 8000CPR Enc Not available in IP65 $ QCI-A17x-x-6T IP65 Motor/Enc Adder, Special Order $ QCI-A23x-x-6T IP65 Motor/Enc Adder, Special Order $ Page 2 of 7 Prices subject to change without notice. 5/5/2014

3 10 AMP CONTROLLERS AND MOTORS SilverSterling 10 Amp QCI-S3-IG Controller/Drivers Recommended Motors: I-Grade Motor/Encoders for use with 10 Amp Controllers - See Below QCI-S3-IG: 2 input also supports 12 bit analog input 10A RMS x 2 phases, 20A peak DMX standard 1 I/O supports PWM output (with Heatsink) Best paired with I-Grade Motor/Encoders Internal feature connector for additional Analog and digital IO RS485 only CANopen Standard Built in Voltage Clamp and Resistor 8 bit ASCII, 9 bit 32 Kilobytes nonvolatile DB15HD Motor I/F binary or Modbus 1023 Word Program Buffer protocols 4 TTL I/O external QCI-S3-IG SilverSterling - In Enclosure QCI-DS027 In Enclosure $ QCI-S3-IG-01 SilverSterling IG, Board Only QCI-DS027 (Requires Heatsink) $ DRIVER SilverNugget 10 Amp I-Grade Controller/Drivers CONTROLLER MOTOR INTERFACE QCI-N3-10 Amp For 34 Frame 10 Amps per Phase (requires heat sink) (25C Ambient) 20 Amp Peak See datasheet QCI-DS006 for more details E3 Standard (same as above) 04-EE - Standard I-Grade Interface DB3 (pin) DB15HD Motor I/F Connector for input power DB5 (socket) Connector (use QCI-C-34EC-LP-10 cable) for motor windings. M3 Modbus (no additional cost) F4 Divide Encoder By 4 No additional cost See datasheet for details QCI-N3-E3-04-EE SilverNugget I-Grade QCI-DS006 $ I-Grade Motors/Encoders for use with 10 amp Controllers Recommended Controllers: QCI-S3-IGx and QCI-N3x A34 QCI-DS009 6T IP65 Standard DB15HD Encoder Connector Encoder Connector: 14 Pin Round DB5 Motor Signal Connector Motor Winding Connector: 6 Pin Round Shaft seal required for full IP65 rating (included). Extra coating on motor exterior. QCI-A34M-1 QCI-A34HK-1 QCI-A34HC-1 QCI-A34HC-2 QCI-A34HC-3 QCI-A34HC-4 QCI-A34x-x-6T Motor w/ 8000CPR Enc Not available in IP65 $ Motor w/ 16000CPR Enc Not available in IP65 $ Motor w/ 16000CPR Enc $ Motor w/ 16000CPR Enc $1, Motor w/ 16000CPR Enc $1, Motor w/ 16000CPR Enc $1, IP65 Motor/Enc Adder, Special Order $ Page 3 of 7 Prices subject to change without notice. 5/5/2014

4 SilverDust 3.5 Amp M-Grade (MG) Controller/Drivers QCI-D2-MG RS-232 or RS-485 SilverLode Multi-Function Interface For 23 Frame and Smaller 8 bit ASCII, 9 bit binary or Modbus protocols (SMI) Port. 3.5 Amps per Phase Continuous 32 Kilobyte non-volatile memory Motor: Plugged terminal strip (requires heat sink) 1023 Program Buffer Encoder: 10 Pin/Double Row (25C Ambient) 7 Inputs or Outputs Mating Connectors Sold Separately. 4.5 Amp Peak 4 Inputs Double as Analog Inputs 0-3.3V Datasheet QCI-DS004 QCI-D2-MG-01 SilverDust MG, Board Only QCI-D2-MG SilverDust MG, With L-Bracket -C -D CANopen Adder DMX512 Adder Requires Heatsink $ Din Compatible $ $20.00 $25.00 M11-1 Motor Connector -6 pin mini JST DESCRI M-Grade Motors/Encoders for use with M-Grade Controllers 4000 CPR Encoder with 10 pin/double Row connector QCI-M11-J Motor w/ 4000CPR Enc QCI-DS017 $ QuickSilver cables can be ordered in various lengths. The end of the part number designates the length in feet. Custom length cables call for pricing and availability. All custom cables have typical 2-4 week delivery. Custom length cables may not be over-molded and may be constructed with clam shell type connectors. See our website for more cables and information including bulkhead and high flex cables. Cables QCI-C-D15P-D15S-01 QCI-C-D15P-D15S-02 QCI-C-D15P-D15S-04 QCI-C-D15P-D15S-10 QCI-C-D15P-D15S-20 QCI-C-D15P-T14S-04 QCI-C-D15P-T14S-10 QCI-C-D5P-D5S-01 QCI-C-D5P-D5S-02 QCI-C-D5P-D5S-04 QCI-C-D5P-D5S-10 QCI-C-D5P-T6S-04 QCI-C-D5P-T6S-10 Motor I/F Cable I-Grade Controller to I-Grade motor. $89.25 $89.25 For right angle connection: $89.25 see QCI-D15HD-R1 & QCI-D15HD-R2 $99.75 $ IP65 Motor I/F Cable I-Grade Controller to I-Grade IP65 motor $ $ DB5 Motor I/F Cable Frame 34 I-Grade Controller motor winding to I-Grade motor. $ $ $ $ IP65 Motor I/F Cable Frame 34 I-Grade Controller motor winding to I-Grade IP65 motor. $ $ Cables & Connector Kits QCI-34EC-LP-10 QCI-C-1BS-4AS-10 QCI-C-2BS-5AS-10 QCI-C-ACP-FLY-6 QCI-C-D9M9F-6 QCI-CK-4AS QCI-CK-5AS QCI-CK-IG8 QCI-C-OP232-7 QCI-C-RJ12-RJ12-A QCI-EC-SMI-10 QCI-EC-SMI-2 QCI-C-S3S-04 DB3W3 Power Cable 5 Pin Motor Cable DB3W3P 3 pin power connector with flying leads. For SilverNugget N3 SilverDust MG or BO-M1 motor winding to M-Grade Motor. $ $ Pin Encoder Cable SilverDust MG or BO-M1 Encoder conn to M-Grade Motor $88.80 Power Cord w/ Flying 3 Prong AC Power Cord. US 120v 13 amp $12.00 Leads D9 Cable Connects Controller to PC COM port. $4.99 Connector Kit: Connector Kit 5 Pin Plugged Terminal Mate to SilverDust D2-MG Motor 10 Pin (socket) Mate to SilverDust D2-MG Encoder $6.00 $6.00 Connector Kit-IG8 Opto I/O Module to RS- 232 Cable Includes: 4 removable terminal strips 5 comm jumpers QCI Opto I/O Module (RJ11) to PC COM port (D9). 7 Cable Only $17.00 $21.00 RJ12 to RJ12 Cable IG8 CAN Ports Patch Cable $5.25 SMI Port Cable Connects to SMI port, 10ft $ SMI Port Cable Connects to SMI port, 2ft $ S3 Power Cable Supplies power to QCI-S3 controllers $63.00 Page 4 of 7 Prices subject to change without notice. 5/5/2014

5 Accessories DIN Rail Clips QCI-17M-65 QCI-23M-65 QCI-34M-65 QCI-BO-B QCI-BO-B3 QCI-BO-S1 17 Frame IP65 Shaft Seal Kit 23 Frame IP65 Shaft Seal Kit QCI-BO-B1 Basic Breakout 1 QCI-BO-B1A QCI-BO-B52 QCI-BO-K QCI-BO-M1 DIN Rail Clips Replacements for such products as CLCF, CLOF and CLRP Package of 25 Includes: Shaft Seal Plate w/ shaft O-ring Face Plate O-ring See QCI-TD037 Includes: Shaft Seal Plate w/ shaft O-ring Face Plate O-ring See QCI-TD037 Includes: 34 Frame IP65 $ /8 Shaft Seal Kit Basic Breakout Shaft Seal D9 (std PC COM). Connects to SMI Port on: SilverDust MG, IG,IGF,IG8 See QCI-TD036 Connects to SMI Port on: SilverDust MG, IG,IGF,IG8,IGB See QCI-TD036 $42.50 $40.50 Basic Breakout 1 w/ Analog 0-5V analog out. $64.00 Out - RoHS Compliant Connects to SMI Port on: SilverDust MG, IG,IGF,IG8 Basic Breakout 3 See QCI-TD048 D9 (std PC COM). Connects to SMI Port on: SilverNugget N3 See QCI-TD038 $42.50 Basic Breakout w/ 24V I/O Connects to SMI Port on: $ In/2 Out SilverDust MG, IG,IGF,IG8 524V In & 224V Out See QCI-TD046 D9 CAN Breakout CAN Breakout to CAN DB9 $40.50 Connects directly to D9 on: SilverDust IGK See QCI-TD064 Motor I/F Breakout Breaks out Motor/Encoder Connects directly to: SilverDust IG,IGF,IGK,IG8, IGB See QCI-TD057 $47.75 Basic Breakout Connects to SIP port on Silver Sterling $42.00 for SilverSterling See QCI-TD068 $20.00 $75.00 $75.00 Accessories A Clamp is Required for all SilverNugget N3 servo controller/drivers See QCI Technical Document QCI-TD017 for details. QCI-CLCF-04 Clamp Module, Closed Frame Power Supply Voltage Clamp Closed Frame Design +15 to +48 VDC operation. No internal resistor. Must be used with external $ QCI-CLCF-04-R2 QCI-CLCF-04-R4 Clamp Module, Closed Frame DIN rail mountable box. Power Supply Voltage Clamp Closed Frame Design +15 to +48 VDC operation. 12A or 20A with 4 or 2 ohm internal resistor respectively. $ QCI-CLOF-04 RH-504 Clamp Module, Open Frame 4 Ohm Power Resistor DIN rail mountable box. Power Supply Voltage Clamp Open Frame Design (no enclosure) +15 to +48 VDC operation. No internal resistor. Must be used with external Includes: High Current Clamp Circuit Assembly 35 mm DIN Rail Clips 4 Ohm, 50 Watt Resistor $ $6.00 Page 5 of 7 Prices subject to change without notice. 5/5/2014

6 Accessories QCI-D15HD-R1 D15HD Rt Angle Adapter When used on I-Grade 17&23 frame motors, cable exits towards shaft. $15.00 QCI-D15HD-R2 D15HD Rt Angle Adapter See QCI-TD049 When used on I-Grade 17&23 frame motors, cable exits away from shaft. $15.00 QCI-D9-CAN-232 CAN to RS-232 Adapter See QCI-TD049 D9 with only RS-232 Tx,Rx,Gnd $6.00 QCI-DIN1 DIN Rail Bracket Short DIN Bracket for IG8/IGF/IGK. Includes screws. $8.00 QCI-DIN2 DIN Rail Bracket Long DIN Bracket for IGB. Includes screws. $8.00 QCI-OPTMC-24 QCI-OPTM-24 QCI-USB-RS485 24V Optical I/O Module On Carrier 24V Optical I/O Module USB to RS485 converter DIN Mountable Breakout for SMI port. Converts SMI Port TTL I/O to optically isolated 24V I/O. See QCI-TD013 Breakout for SMI port. Converts SMI Port TTL I/O to optically isolated 24V I/O. See QCI-TD013 USB (plug) to RS-485 converter. Breaks IO to screw cage connector. Has red and $ $ $46.00 QCI-EMAN CD-Electronic Copy of green CD Includes: LEDs to indicate Tx and Rx FREE ONLINE Silverload Manuals & QuickControl, User Manual & Command Ref QuickControl Software Download QuickControl Software and Manuals Page 6 of 7 Prices subject to change without notice. 5/5/2014

7 Power Supplies Single output switching power supplies SP SE RSP Power Supply 48V, 4.4A, 210W Good for any D2, S2 with standard motor $70.00 Power Supply 48v, 20.8A $ Power Supply 48v, 21A, Universal input with Power Factor Correction $ Page 7 of 7 Prices subject to change without notice. 5/5/2014