Life Cycle Assessment of Plastics. GaBi Software
|
|
- Susanna Norman
- 7 years ago
- Views:
Transcription
1 Life Cycle Assessment of Plastics & GaBi Software Maiya Shibasaki
2 Life Cycle Assessment Life cycle approach as basis for the system model Impact assessment Resource Consumption (Materials and Energy Carriers), Global Warming, Ozone Depletion, Summer Smog, Acidification, Eutrophication, Human-Toxicity, Eco-Toxicity, Land use Impact Analysis Life Cycle Inventory Emissions Waste Resources Output Output Output Output Output Input Input Input Input Input Life cycle phases Raw material extraction Production of Intermediates Production of Main products Utilization Recycling, recovery, disposal...
3 Production Differentiation according polymerisation process Process Bulk polymerisation Solution polymerisation Solvent Monomer as solvent Organic solvent Example PS, PET SBR, PE Suspension polymerisation Emulsion polymerisation Gas phase process With Water, materials not solved in water With Water and emulgator, materials not solved in water none PVC, HI-PS ABS, PTFE PE, PP Quelle: BREF
4 Production Comparison of impact categories related to PE-HD 500% 450% 400% 350% 300% PE-HD PP PS PET PA 6 PVC 250% 200% 150% 100% 50% 0% EP POCP GWP 100 AP
5 From raw materials over intermediates to products Polymer production (example)
6 End of Life End of Life of plastics in Gemany 2003 Total Recycling Disposal Quelle: consultic
7 Different recycling possibilities Product Recycling Same application? Reuse Further utilisation Multi way bottle Milkbottel Product keep structure? Material Recycling keep Material? Material recycling Raw material recycling New bottle Carpet Solvolysis Energetic recycling Incineration plant Landfill -
8 End of Life Energetic Recycling incineration plant Plastics have a high calorific value, comparabel with crude oil. This energy is used for the production of power and/or heat energetic recycling. This is also applicable for mixed plastic waste fractions. The incineration plant is not constructed for an exclusive incineration of plastics (the temperature would be to high). The high calorific value is wanted to support incineration materials with a low calorific value. Average calorific values (h u ) of established plastics: PP 42 [MJ/kg] PE-LD 43 [MJ/kg] PE-HD 43 [MJ/kg] PS 42 [MJ/kg] PVC 17 [MJ/kg] PA [MJ/kg] PET 23 [MJ/kg]
9 Application of LCA - FTP funded by Federal Ministry of Education and Research of Germany (BMBF) Partners (alphabetic): ICT, IfR, IKP, IPP, Pongs & Zahn Plastics, Nehlsen-Plump, Tank Schuler, TI Group Automotive System, Uhde Hochdrucktechnik, Werit Recycling of Fuel Tanks (PE-HD Homogeneous material) C W S P B HD-PE Material to comply with ELV Extraction using supercritical CO2 From economic point of view recycling together with household tanks Supercritical CO 2
10 Application of LCA - FTP funded by Federal Ministry of Education and Research of Germany (BMBF) 2,50E-11 2,00E-11 1,50E-11 LCA result gasoline tank (End of Life phase) Environmental benefits and burdens overview FTP system (supercritical CO 2 ) Energy recovery Material recycling 1,00E-11 5,00E-12 0,00E+00-5,00E-12 Burdens GWP AP EP POCP Benefits Impact potentials normalized (Germany) 7,5 kg gasoline tank The extraction method with supercritical CO 2 is a successful recycling method for contaminated plastics. The FTP recycling system leads to a recycling system with comparable environmental impacts to alternative disposal systems (energy recovery and material recycling). The FTP recycling system performs in most of the environmental impact categories better than the alternatives. By optimizing the recycling concept the economic aspect can also be improved further on.
11 The GaBi4 Software-System
12 Start Screen Information on the software: new features, Example, Online-Handbook, Documentation and FAQ. GaBi 4 Service: News, Database Contents, Contacts, User forum Links to LCA, LCE, DfE, Emission Trading, GaBi software, IKP Dept. GaBi, PE Europe and sales partner homepages Database: To work with GaBi, you need to activate a database
13 Different languages GaBi interface is offered in different languages: - English -German - Japanese -Danish -Chinese - Portuguese -Spanish
14 Expert use of the software creation of complex models
15 Hierarchical modeling within GaBi 4: Process Process Process Process Plan 1 Process System Main Plan Process Process Process Plan 2 Sub-System 1 Plan 1 Process Process Process Process Process Process Process Sub-System 2 Plan 2 - An already modelled plan can be used on another plan (hierarchical order of plans). - Once installed in the database, each process (as well as any other GaBi 4 object like plans) can be used multiple times --> DB-Object and (local) Object-Instance.
16 Thinking behind the software converting real life into GaBi 4 The analyzed system is defined as a plan! A plan consists of the identified processes! Processes are build-up and connected by product flows!
17 Process dialog window Description of processes with Inputand Output-Flows Detailed Documentation of data quality according to ISO requirements for each flow Includes besides Life Cycle Inventory data, information on costs (LCC = Life Cycle Costing) and (in future) on social aspects (LCWT = Life Cycle Working Time)
18 Flow dialog window In GaBi 4, Flows describe mass-, cost- or energy flows Flows characterized as product flows are used to connect processes Flow properties ( Quantities ) used for Impact assessment, documentation and support in advanced modelling. LCA view Quantities make the system flexible The more quantities are available, the merrier flexibility in the analysis of the results LCC view Standard impact categories are already included
19 Database manager - Processes in GaBi 4 Processes are organized in different categories in an easily comprehensible structure Powerful search functions further speed up work
20 Database manager - Flows within GaBi 4 Flows are organized in different categories of an easy overview Databases content covers at the moment more than 2000 flows Database content can be easily enlarged by the user
21 Thinking behind the software converting real life into GaBi 4 To support daily work, GaBi 4 database provides: A hierarchical flows classification with more than 2000 predefined flows ready to use A hierarchical process classification with more than 2000 processes available The GaBi 4 database covers all essential fields of energy and material production as well as transportation The GaBi 4 GaBi 4 database content can be extended according to any client-specific demand
22 Enhanced modeling using parameters Definition: Parameters allow for variation of processes (e.g. change yield, emission-factors,...) Why parameters: 1. use basic process for specific product derivates 2. adjust basic process to different operation conditions 3. create mixes, set if-then conditions etc. Parameters are required for efficient Scenario Analyses or Parameter Variations within the Analysis of Balances (GaBi-Analyst) as well as Sensitivity Analysis and Monte Carlo Simulation (--> see later transparency) Parameters allow the central management of settings Parameter types: Global Parameters are parameters with the same value to be used database-wide Process parameters are parameters used directly in the process. Process Parameters are Free (defined by a value) and Fixed (defined by an equation) Parameters Plan parameters are parameters used on plan level or to transfer parameters from plan to plan
23 Modeling Process Parameters - Example Free Parameters Fixed Parameters
24 GaBi 4 parameter explorer All parameter settings can be administrated centrally with the GaBi 4 parameter explorer. Offers an excellent overview on all parameters used in the current balance Very easy to use Switch between different views on system possible Extremely helpful also to define scenarios for analysis
25 Software functionality of GaBi 4 Overview functionality of the GaBi 4 Analyst Scenario Analysis two or more scenarios are created and compared according to the individual parameter settings the difference between the scenarios is visualized by bar diagrams of the chosen quantity (e.g. energy, GWP, ) Parameter Variation two extreme scenarios are created. The number of intermediate steps is defined. One or more parameters can be varied at the same time. the results are visualized by trend lines. These are linear or non-linear functions. Therefore optima can easily be identified. Sensitivity Analysis Sensitivity of parameters is analyzed according their standard deviation. The sensitivity analysis checks the relevance of single parameters for overall results. Monte Carlo Simulation The calculation of overall errors (due to imprecise measures or stochastic uncertainties in models) with an advanced stochastic method. Very fast, very flexible, easy to use. The chosen basis scenario with possibly standard deviations is randomly varied. Minimum and maximum limits can additionally be set.. The result is a calculated mean value of the chosen quantity (e.g. GWP) with standard deviation and a depicted distribution pattern of the results.
26 Balance Inputs Outputs A balance consists of lists showing all Input- and Output-materials (flows), which accumulate along the entire Life Cycle of a product (i.e. one ore more plans and processes) Results can be presented on different aggregation levels and in different units
27 Visualization options within balances Various types of graphics support balance and model analysis Data transfer to Excel often unnecessary Very easy to use
28 GaBi 4 Software & Databases Products GaBi 4 the Standard Software for product related environmental measures GaBi 4 supports in: Life Cycle Assessment (LCA) case studies on the basis of materialand energy flow as well as process information Life Cycle Engineering (LCE = LCA plus costs), Life Cycle Costing (LCC) and Life Cycle Sustainability (LCS = LCS plus social aspects finding solutions within design alternatives like answers to questions of material or process choice etc. the performance of benchmarks and energy efficiency studies the calculation of green house gas balances supporting environmental management systems or sustainability reporting
29 Thank you for your attention
LCA EXPERIENCE IN THE FIELD OF RECYCLING OF PLASTICS FROM ELECTRONIC WASTE
LCA EXPERIENCE IN THE FIELD OF RECYCLING OF PLASTICS FROM ELECTRONIC WASTE B. DeBenedetti, L. Maffia, G.L. Baldo 2 Dipartimento di Scienza dei Materiali ed Ingegneria Chimica, Politecnico di Torino, Italy
More informationHow To Understand The Environmental Impacts Of A Plastic Bottle
COUPLING LIFE CYCLE ASSESSMENT AND PROCESS SIMULATION TO EVALUATE THE ENVIRONMENTAL IMPACTS OF PLASTICS WASTE MANAGEMENT: APPLICATION TO PET BOTTLES RECOVERY LCA SRCR 14 12-13 June 2014, Falmouth Amélie
More informationState of the art sustainability marketing tools
State of the art sustainability marketing tools Anne-Marie Imrell ABB AB 2003 ABSTRACT This report belongs to the DANTES project that is supported by the EU Life Environment Program. Examination of how
More informationWhite Paper Life Cycle Assessment and Product Carbon Footprint
White Paper Life Cycle Assessment and Product Carbon Footprint Fujitsu ESPRIMO E9900 Desktop PC Climate change is one of the most important global challenges that society of the 21st century faces. According
More informationLegrand's environmental commitments
128 Av. du Maréchal-de-Lattre-de-Tassigny 87045 Limoges Cedex - France Tel.: 05 55 06 87 87 - Fax: 05 55 06 88 88 i Your usual Sales office Website www.legrand.fr Product Environmental Profile plate and
More informationReview Timber as a Building Material - An environmental comparison against synthetic building materials
NAFI N a t i o n a l A s s o c i a t i o n o f F o r e s t I n d u s t r i e s L t d Review Timber as a Building Material - An environmental comparison against synthetic building materials By Phil Townsend
More informationLIFE CYCLE ENGINEERING OF MINING AND INDUSTRIAL SITES
LIFE CYCLE ENGINEERING OF MINING AND INDUSTRIAL SITES Barthel, L.-P. 1 ; Wolf, M.-A. 1 ; Will, M.; Baitz, M. 2 and Eyerer, P. 1 1 Dept. For Life Cycle Engineering; IKP, University of Stuttgart barthel@ikp2.uni-stuttgart.de
More informationLCA approaches for quantifying the environmental impact of plastics in the marine environment
LCA approaches for quantifying the environmental impact of plastics in the marine environment Summary Graduation Project Report by Otto Faasse from Avans University of Applied Science, Breda IVAM UvA BV
More informationPrinted circuit board [EDP 2005-108(0)]
Printed circuit board [EDP 2005-108(0)] 1. General 1.1. Scope and definition This requirement specifies technical considerations, declaration format and communication necessary for developing and issuing
More informationEnvironmental Product Declaration
Environmental Product Declaration PVDF-System According to EN 15804 Circling and distribution of purified water in a pharmaceutical plant Georg Fischer Piping Systems Ltd. Ebnatstrasse 111 CH-8201 Schaffhausen
More informationPost-Consumer Plastic Waste Management in European Countries 2012 - EU 27 + 2 Countries -
Final Report (October 2013) Post-Consumer Plastic Waste Management in European Countries 2012 - EU 27 + 2 Countries - PlasticsEurope Av. E. Van Nieuwenhuyse 4/3 B-1160 Bruxelles CONSULTIC MARKETING & INDUSTRIEBERATUNG
More informationThe BOMBARDIER* REGINA*
TALENT 2 REGINA Intercity X55 Environmental Product Declaration Environmental Product Declaration The BOMBARDIER* REGINA* Intercity X55 train reflects our dedication to developing products and services
More informationZinkbolt. ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO 21930 and EN 15804 Owner of the declaration:
ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO 21930 and EN 15804 Owner of the declaration: Program operator: Publisher: Declaration number: ECO Platform reference number: 00000280
More informationGlasopor 10-60 (Cellular glass aggregate) Product
1114 Ver. 2:214 ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 1425 ISO 2193 EN 1584 Publisher The Norwegian EPD Foundation Declaration number NEPD15E Rev 1 27.1.214 Issue date 27.1.219 Valid
More informationSustainable Plastics with Reduced Carbon Footprint & Reduced Waste
Sustainable Plastics with Reduced Carbon Footprint & Reduced Waste Joseph P. Greene California State University, Chico Chico, CA 95929-0789 Abstract Plastic products can be made more sustainable by reducing
More informationFinal Report. Life Cycle Impact Assessment of Aluminum Beverage Cans. Aluminum Association, Inc. Washington, D.C. PE Americas.
May 21, 2010 Final Report Life Cycle Impact Assessment of Aluminum Beverage Cans Prepared for: Aluminum Association, Inc. Washington, D.C. Prepared by: Contact: Nuno da Silva Neil d Souza 344 Boylston
More informationSustainable Manufacturing Seminar. Designing to Sustain the Economy, Environment and Society. Sustainable Product Standards (case-study)
Sustainable Manufacturing Seminar Designing to Sustain the Economy, Environment and Society Sustainable Product Standards (case-study) The Eco-efficiency Evaluation of BASF s Greenville Thermal Oxidizer
More informationLife Cycle Assessment of a Solid Ink MFP Compared with a Color Laser MFP Total Lifetime Energy Investment and Global Warming Impact
Xerox ColorQube 8900 Color MFP White Paper Life Cycle Assessment of a Solid Ink MFP Compared with a Color Laser MFP Total Lifetime Energy Investment and Global Warming Impact Table of Contents Executive
More informationGlasopor 10-60 (Cellular glass aggregate) Product
1114 Ver. 2:214 ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 1425 ISO 2193 EN 1584 Publisher The Norwegian EPD Foundation NEPD28E Declaration number 27.1.214 Issue date 27.1.219 Valid to epd-norge
More informationFord of Europe s Product Sustainability Index
Ford of Europe s Product Sustainability Index Society Environment Wulf-Peter Schmidt Ford of Europe, Vehicle Environmental Engineering Supervisor CO2/Sustainability & Tech. Spec. Vehicle Recycling Economy
More informationHow To Do A Complete Life Cycle Analysis Of Packaging
INTRODUCES A Time for Clarity WHY COMPLETE LCAs MATTER Climate change is one of the greatest challenges of our time. In responding to the imperative to reduce greenhouse gases, O-I feels a strong sense
More informationParoc Insulation, product group with density <70 kg/m³ Product
1114 Ver. 2:2014 ENVIRONMENTAL PRODUCT DECLARATION ISO 14025 ISO 21930 EN 15804 Owner of the declaration Publisher Declaration number Issue date Valid to epd-norge logo Paroc AB The Norwegian EPD Foundation
More informationENVIRONMENTAL Product Declaration as per ISO 14025 and EN 15804. Akçansa Çimento Sanayi ve Ticaret A.Ş. Portland Cement CEM I 42.
ENVIRONMENTAL Product Declaration as per ISO 14025 and EN 15804 Owner of the Declaration Programme holder Institut Bauen und Umwelt e.v. (IBU) Publisher Institut Bauen und Umwelt e.v. (IBU) Declaration
More informationLevi Strauss & Co. San Francisco, CA March 2009
Levi Strauss & Co. San Francisco, CA March 2009 1 Why a Product-Lifecycle Approach? In 2006, we had several programs in place to address environmental impacts associated with the production of our products
More informationHow To Understand The Purpose Of Life Cycle Assessment
Life-Cycle Assessment Lesson 1 Overview This is the first lesson on life cycle assessment in this module. In this lesson, the framework for conducting life-cycle assessments is described and examples of
More informationQuantitative Inventory Uncertainty
Quantitative Inventory Uncertainty It is a requirement in the Product Standard and a recommendation in the Value Chain (Scope 3) Standard that companies perform and report qualitative uncertainty. This
More informationLegrand's environmental commitments
VDI enclosure 128, Av. du Maréchal-de-Lattre-de-Tassigny 87045 Limoges cedex - France Tel: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 i Your usual Sales office Website: www.legrand.fr This document
More informationEnvironmental Performance Data Calculation Standards
Environal Performance Data Calculation Standards Subject Period: April 1, 2012 March 31, 2013 Scope : Fujitsu and Fujitsu Group (For details, refer to the List of Companies Covered by the Report on Environal
More informationLife Cycle Assessment (LCA) and Life Cycle Cost (LCC) Tool. for Commercial Building Developments in Hong Kong
Life Cycle Assessment (LCA) and Life Cycle Cost (LCC) Tool for Commercial Building Developments in Hong Kong FORWARD Forward 2002, the Electrical and Mechanical Services Department In (EMSD) of the HKSAR
More informationScreening Study of Life Cycle Assessment (LCA) of the Electric Kettle with SimaPro Software***
GEOMATICS AND ENVIRONMENTAL ENGINEERING Volume 5 Number 3 2011 Katarzyna Grzesik*, Kinga Guca** Screening Study of Life Cycle Assessment (LCA) of the Electric Kettle with SimaPro Software*** 1. Introduction
More informationGaBi EDU. Handbook to Explain LCA Using the GaBi EDU Software Package
GaBi EDU Handbook to Explain LCA Using the GaBi EDU Software Package Title of the Study: Client: August 2009 Authors: Matt VanDuinen Nicole Deisl PE AMERICAS LLC 344 Boylston Street, 3 rd Floor Boston,
More informationDocumentation. Mechanical Recycling versus Incineration of PVC waste. Greenhouse gas emissions. European Council of Vinyl Manufacturers (ECVM)
Documentation Mechanical Recycling versus Incineration of PVC waste Greenhouse gas emissions European Council of Vinyl Manufacturers (ECVM) Title: Mechanical recycling versus incineration of PVC waste
More informationThe new Audi TT Coupé. Life Cycle Assessment
The new Audi TT Coupé Life Cycle Assessment Content Foreword Life cycle assessment what s involved Life cycle assessment the boundaries Life cycle assessment the effect categories Lightweight construction
More informationTechno-economic and ecological evaluation of a wood biorefinery
Techno-economic and ecological evaluation of a wood biorefinery Martina Haase 1, Magnus Fröhling 1, Jörg Schweinle 2, Birgit Himmelreich 3 1) Industrial Production, Universität Karlsruhe (TH) 2) Johann
More informationLIFE CYCLE ENGINEERING
IBP FRAUNHOFER INSTITUTE FOR BUILDING PHYSICS IBP LIFE CYCLE ENGINEERING WHERE SCIENCE STOPS IS ACTUALLY ALSO WHERE SCIENCE BEGINS TO GET INTERESTING. JUSTUS VON LIEBIG (1803 1873), GERMAN CHEMIST LIFE
More informationThe new Audi R8. Life Cycle Assessment
The new Audi R8 Life Cycle Assessment Audi R8 the life cycle assessment Audi has compiled a detailed life cycle assessment for the Audi R8 Coupé V10 plus 5.2 FSI quattro 449 kw S tronic** (hereinafter:
More informationLife Cycle Assessment of Newsprint Distribution at an Integrated Mill. Erica Salazar, M.Sc.A. (P2004)
Life Cycle Assessment of Newsprint Distribution at an Integrated Mill Erica Salazar, M.Sc.A. (P2004) Introduction Life Cycle Thinking is being promoted among different sectors involved in product chains.
More informationMethodologies for assessing Green Jobs Policy Brief
Methodologies for assessing Green Jobs Policy Brief Introduction By pioneering sustainable economic activities, both developed and developing countries stand to generate new jobs and strengthen their economies,
More informationAn Introduction to Product Takeback
An Introduction to Product Takeback Overview Driving forces behind product takeback Product takeback legislation Product end-of-life options Reverse logistics Case study Motivation for Product Takeback
More informationConclusions and Summary Report Environmental Life Cycle Assessment of Highway Guard Rail Posts
Conclusions and Summary Report Environmental Life Cycle Assessment of Highway Guard Rail Posts ISO 14044 Compliant Prepared by: AquAeTer, Inc. Treated Wood Council (2013) Conclusions and Summary Report
More informationEnvironmental Project No. 809 2003 Miljøprojekt. Waste Indicators. Ole Dall, Carsten Lassen and Erik Hansen Cowi A/S
Environmental Project No. 809 2003 Miljøprojekt Waste Indicators Ole Dall, Carsten Lassen and Erik Hansen Cowi A/S The Danish Environmental Protection Agency will, when opportunity offers, publish reports
More informationA clean energy solution from cradle to grave
Environmental Product Declaration A clean energy solution from cradle to grave Offshore wind power plant employing SWT-6.0-154 siemens.com / wind 2 Assessing the performance of a wind power plant The environmental
More informationGeneral Structure of Life Cycle Impact Assessment Lecture. Mark Huijbregts Department of Environmental science Radboud University
General Structure of Life Cycle Impact Assessment Lecture Mark Huijbregts Department of Environmental science Radboud University Topics Life cycle impact assessment structure Simple vs complex LCIA methods
More informationData Center Life Cycle Analysis. Christophe Garnier EMEA Technical Work Group Member Schneider Electric
Data Center Life Cycle Analysis Christophe Garnier EMEA Technical Work Group Member Schneider Electric V3 The 3 Pillars of Sustainability Sustainability = meet the needs of the present without compromising
More informationThe challenge of mixed plastics recycling. Luca Stramare R&D Manager COREPLA (Italy)
The challenge of mixed plastics recycling Luca Stramare R&D Manager COREPLA (Italy) 2 Plastic packaging Protection Convenience Information Producer Transport Marketing Consumer 3 The problem begins at
More informationLCA of biofuels: developments and constraints
LCA of biofuels: developments and constraints Dr. Julio C. Sacramento Rivero Faculty of Chemical Engineering Universidad Autonoma de Yucatan 1 Contents Scope of this presentation Brief overview of LCA
More informationExecutive Summary. The Sustainability of Packaging Systems for Fruit and Vegetable Transport in Europe based on Life-Cycle-Analysis Update 2009
The Sustainability of Packaging Systems for Fruit and Vegetable Transport in Europe based on Life-Cycle-Analysis Update 2009 On behalf of Stiftung Initiative Mehrweg of the Study: The Sustainability of
More informationAn environmental comparison of paper and plastic labels. Chris Edwards & Gary Parker Intertek Expert Services
An environmental comparison of paper and plastic labels Chris Edwards & Gary Parker Intertek Expert Services Introduction To provide retailers with an understanding of the carbon footprint of paper and
More informationApproved baseline and monitoring methodology AM0056
Approved baseline and monitoring methodology AM0056 Efficiency improvement by boiler replacement or rehabilitation and optional fuel switch in fossil fuel-fired steam boiler systems I. SOURCE AND APPLICABILITY
More informationBirmingham City University / Students Union Aspects and Impacts Register. Waste. Impacts description
Birmingham City University / Students Union and Impacts Register Waste Production of non - hazardous waste Production of hazardous waste Storage of non - hazardous waste Potential for waste to be disposed
More informationLonbakken Steel Staircase t. 6100 Product
1114 Ver. 2:2014 ENVIRONMENTAL PROUCT ECLARATION In accordance with ISO 14025 ISO 21930 EN 15804 Publisher eclaration number Issue date Valid to epdnorge logo The Norwegian EP Foundation NEP00282E 25.11.2014
More informationHow To Calculate The Greenhouse Effect (Carbon Footprint) On A Desktop Pc (Fujitsu)
Carbon Footprinting of Information Technology Products based on ISO standards Corporate Quality 1 Copyright 2011 FUJITSU Content Introduction Standards Approach Results Limitations Conclusions 2 Copyright
More informationLIFE CYCLE ASSESSMENT OF CHOCOLATE PRODUCED IN GHANA
LIFE CYCLE ASSESSMENT OF CHOCOLATE PRODUCED IN GHANA GEORGE AFRANE Koforidua Polytechnic Koforidua, Ghana AUGUSTINE NTIAMOAH Department of Chemical Engineering Kwame Nkrumah University of Science & Technology,
More informationEnvironmental Product Declaration
Environmental Product Declaration Large Distribution Transformer 16/20 MVA (/) CERTIFIED ENVIRONMENTAL PRODUCT DECLARATION S-P-00056 http://www.environdec.com T&D S.p.A. Unità operativa Trasformatori di
More informationShort course GaBi Software System
Presentation Short course GaBi Software System by Leif Barthel (barthel@ikp2.uni-stuttgart.de) Tel. ++49 (0) 711 48 99 99 32 Agenda Product and production site related environmental measures Drivers, activities,
More informationLife Cycle Assessment of Swiss Chocolate
Life Cycle Assessment of Swiss Chocolate Niels Jungbluth, Alex König, ESU-services Ltd, Zürich SETAC Europe 24th Annual Meeting Bale, 15 th May 2014 E S U Key questions What are the differences between
More informationWater Footprint Project
Water Footprint Project Sonia Valdivia Guido Sonnemann UNEP/SETAC Life Cycle Initiative UNEP DTIE SCP Branch UNEP-SBCI Symposium on Sustainable Buildings Paris, France: May 19-20, 2010 Outline Introduction
More informationLife cycle energy analysis of water use system in Ara river watershed
Life cycle energy analysis of water use system in Ara river watershed Hiroaki FURUMAI Professor, Research Center for Environment Technology University of Tokyo IWA Workshop on and & Loss Tokyo, 8 April
More informationA green business model
A green business model Greens/EFA meeting Copenhagen, 11th of May 2012 Page 1 Presented by Thomas Becker CEO, Genan Business & Development tb@genan.eu Page 2 The leading and largest scrap tyre recycler
More informationSolid softwood panelling for interior use Product
1114 Ver. 2:2014 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO 21930 and EN 15804 Owner of the declaration Norwegian Wood Industry Federation Publisher The Norwegian EPD Foundation
More informationDecaffeination of Raw, Green Coffee Beans Using Supercritical CO 2
Decaffeination of Raw, Green offee Beans Using Supercritical O 2 Background The worldwide coffee market and the industry that supplies it are among the world s largest. offee as a world commodity is second
More informationValue adding in 3D CAD models for environmental assessment of buildings
Value adding in 3D CAD models for environmental assessment of buildings Selwyn Tucker Michael Ambrose Seongwon Seo CSIRO Manufacturing Infrastructure and Technology Building environmental assessment Design
More informationCarbon Sequestration Tool Background and User Guide
Carbon Sequestration Tool Background and User Guide Table of Contents Quick Start Methodology Content of Worksheets Frequently Asked Questions Quick Start 1. Determine which of the two carbon tools you
More informationEnvironmental Product Declaration. Registration number: S-P-00047. Rev. 0 11/06/03. Tmax T1. Low voltage circuit breaker.
Environmental Product Declaration Registration number: S-P-00047 Rev. 0 11/06/03 Tmax T1 Low voltage circuit breaker ABB SACE SpA Information about the company and the product This document aims to provide
More informationLife Cycle Assessment applied to urban settlements
Life Cycle Assessment applied to urban settlements INTRODUCTION HERFRAY Gregory CEP, MINES ParisTech gregory.herfray@mines-paristech.fr PEUPORTIER Bruno CEP, MINES ParisTech bruno.peuportier@mines-paristech.fr
More informationProtan SE 1.2 Roof Membrane Product
29.10.2013 ENVIRONMENTAL PRODUCT DECLARATION ISO 14025 ISO 21930 EN 15804 Owner of the declaration Program holder Publisher Declaration number Issue date Valid to NEPD-00032E rev1 22.01.2013 22.01.2018
More informationProduct Environmental Profile Step Down Transformers
Product Environmental Profile Step Down Transformers Product overview Step-down transformers are used to convert a higher input voltage (208-200 V) to a lower output voltage (120-100 V). They are used
More informationGYPSUM ASSOCIATION LIFE-CYCLE ASSESSMENT SUMMARY
GYPSUM ASSOCIATION LIFE-CYCLE ASSESSMENT SUMMARY GYPSUM ASSOCIATION The Gypsum Association (GA) is an international, not-for-profit trade association that is tax exempt under Section 501 (c) 6 of the Internal
More informationProduct Environmental Assessment Activities in Taiwan
Product Environmental Assessment Activities in Taiwan Jet Wu Taiwan Environmental Management Association November 25, 2014 Taiwan Environmental Management Association Established 1998 Focus on Promote
More informationSingle- Serve Coffee A Partial Environmental Inventory
Single- Serve Coffee A Partial Environmental Inventory Valerie M. Thomas 1 School of Industrial and Systems Engineering, and School of Public Policy Georgia Institute of Technology http://www.isye.gatech.edu/~vthomas
More informationEPD - VERIFICATION. Saint-Gobain ISOVER. Information for the verification of Environmental Product Declarations of Saint-Gobain Products
AIB-VINÇOTTE International nv Business Unit Vinçotte Environment, Safety and Sustainability Eploitatiezetel: Business Class Kantorenpark Jan Olieslagerslaan 35 1800 Vilvoorde België Tel +32 (0)2 674 57
More informationEXECUTIVE SUMMARY INTRODUCTION
EXECUTIVE SUMMARY INTRODUCTION Bottled water offers consumers a clean, portable supply of drinking water for consumption at home or away from home. Some disposable water bottles are recyclable, and lightweighting
More informationGaBi Hand Dryer Tutorial
UNIVERSITY OF TEXAS, EL PASO GaBi Hand Dryer Tutorial MFG 5390/IE 5390/ IE 4395 GREEN ENERGY MANUFACTURING CLASS Fall- 2013 Contents Purpose of the Tutorial... 3 Introduction... 4 Life Cycle Analysis...
More informationReliability Modeling Software Defined
Reliability Modeling Software Defined Using Titan Reliability Modeling Software May 30, 2014 Prepared by: The Fidelis Group 122 West Way, Suite 300 Lake Jackson, TX 77566 Fidelis Group, LLC All Rights
More informationENVIRONMENTAL PRODUCT DECLARATION as per ISO 14025 and EN 15804
ENVIRONMENTAL PRODUCT DECLARATION as per ISO 14025 and EN 15804 Owner of the Declaration EGE PROFİL Tic. ve San. A.Ş. Programme holder Institut Bauen und Umwelt e.v. (IBU) Publisher Institut Bauen und
More informationTotal Lifetime Energy Investment and Global Warming Impact
Xerox ColorQube 9201 / 9202 / 9203 White Paper Life Cycle Assessment of a Solid Ink Compared with a Colour Laser Total Lifetime Energy Investment and Global Warming Impact Table of Contents Executive Summary...
More informationMethod to take into account material recycling and end of life in LCA
Method to take into account material recycling and end of life in LCA LCA Forum Lausanne, 22 November 2007 Dr J.-S. Thomas ArcelorMittal Research C. Broadbent IISI Overview Steel recycling IISI and Steel
More informationMETHODOLOGY OF LIFE-CYCLE ASSESSMENT OF RC STRUCTURES USING HIGH PERFORMANCE CONCRETE
METHODOLOGY OF LIFE-CYCLE ASSESSMENT OF RC STRUCTURES USING HIGH PERFORMANCE CONCRETE Ctislav FIALA CTU in Prague, Thákurova 7, 166 29 Prague 6, Czech Republic, ctislav.fiala@fsv.cvut.cz Magdaléna NOVOTNÁ
More informationLife Cycle Assessment of consumer packaging for liquid food
REPORT Life Cycle Assessment of consumer packaging for liquid food LCA of Tetra Pak and alternative packaging on the Nordic market Kristian Jelse, Elin Eriksson and Elin Einarson 25 August 29 Archivenumber:.
More informationBASIS cement ENVIRONMENTAL PRODUCT DECLARATION. Aalborg Portland A/S ISO 14025 ISO 21930 EN 15804. The Norwegian EPD Foundation 07.02.2013 07.02.
17.12.213 ENVIRONMENTAL PRODUCT DECLARATION ISO 1425 ISO 2193 EN 1584 Owner of the declaration Program holder Publisher Declaration number Issue date Valid to NEPD-161E 7.2.213 7.2.218 BASIS cement CEM
More informationEnvironmental Management Systems in Hotels. 15 Steps to the Successful Implementation of an Environmental Management System in a Hotel
Environmental Management Systems in Hotels 15 Steps to the Successful Implementation of an Environmental Management System in a Hotel 2 15 STEPS 1. Assemble the team 2. Initial Review 3. Environmental
More informationKonica Minolta s green contribution
ENvironmental Konica Minolta s green contribution Konica Minolta, a leading manufacturer of printing technologies, sees the protection of the environment as an essential part of its corporate management
More informationPE9.4 Corrected Report
PE9.4 Corrected Report STAFF REPORT ACTION REQUIRED Toronto s 2013 Greenhouse Gas Inventory Date: December 17, 2015 To: From: Wards: Reference Number: Parks and Environment Committee Chief Corporate Officer
More informationNOTE: 08/2014 revision corrects issues related allocation & slag and fly ash within the Int. EPD PCR evaluation.
Comparison of Concrete PCRs-Rev 1 This comparison of three Concrete PCRs: versions 1.0 and 1.1 of the Carbon Leadership Forum PCR and version 1.0 of the International EPD system PCR was prepared by K.
More informationBelgard Pavers Interlocking Concrete Paving Units
Belgard Pavers Interlocking Concrete Paving Units ENVIRONMENTAL PRODUCT DECLARATION VERIFICATION For over 60 years, Anchor, an Oldcastle Company based in Red Bank, NJ has been a leading manufacturer of
More informationLIFE CYCLE IMPACTS OF ALKALINE BATTERIES WITH A
LIFE CYCLE IMPACTS OF ALKALINE BATTERIES WITH A FOCUS ON END OF LIFE A STUDY CONDUCTED FOR THE NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION Draft release to internal group: June 2010 External review:
More informationPRODUCT - SPECIFIC REQUIREMENTS (PSR) Wood particleboards PSR 2003:8. The Swedish Environmental management Council Version 1.
EPD R PRODUCT - SPECIFIC REQUIREMENTS (PSR) for preparing an environmental product declaration (EPD) for Product Group Wood particleboards PSR 2003:8 The Swedish Environmental management Council Version
More informationMUNICIPAL SOLID WASTE MANAGEMENT IN ITALY
MUNICIPAL SOLID WASTE MANAGEMENT IN ITALY L. Rigamonti DIIAR Environmental Section - Politecnico of Milan (Italy) (Sept.-Nov. 2006 Visiting Scholar WTERT, Columbia University; Advisor: Prof. N.J. Themelis)
More informationLIFE CYCLE ASSESSMENT ON COTTON AND VISCOSE FIBRES FOR TEXTILE PRODUCTION
LIFE CYCLE ASSESSMENT ON COTTON AND VISCOSE FIBRES FOR TEXTILE PRODUCTION Janka Dibdiakova, Volkmar Timmermann Norwegian Forest and Landscape Institute (NFLI) Ås, Norway COST FP1205 Innovative applications
More informationIntroduction to Waste Treatment Technologies. Contents. Household waste
Contents Introduction to waste treatment technologies 3 Section 1: The treatment of recyclable waste 4 Bulking facilities 5 Materials Reclamation Facility (MRF) 6 Reuse and recycling centres 8 Composting
More informationWaste a source of energy. Regional Solid Waste Management Plan Review: Engaging solutions for tomorrow. Incineration. Incineration
Waste a source of energy Regional Solid Waste Management Plan Review: Engaging solutions for tomorrow Garbage School 301: Waste to Energy All organic materials contains energy Plant or animal based Plastics
More informationLCA of different conventional crude oil production technologies Dipl.-Ing. Oliver Schuller
LCA of different conventional crude oil production technologies Dipl.-Ing. Oliver Schuller Dipl.- Ing. Sebastian Schmidt Outline Motivation and objective Definitions and description of technologies Development
More informationIWR Integrated Waste Recycling. Integrated System for treatment and recycling of Municipal Solid Waste
IWR Integrated Waste Recycling Integrated System for treatment and recycling of Municipal Solid Waste 1 1. Introduction IWR is an integrated system, realised by different Italian companies, manufacturers
More informationUse of Substitute Fuels in Large Combustion Plants (LCPs)
Use of Substitute Fuels in Large Combustion Plants (LCPs) By Pat Swords Content of the Presentation What are substitute fuels What is the experience to date with these fuels What are the regulatory implications
More informationOriginal Research Life Cycle Assessment of Municipal Solid Waste Management Comparison of Results Using Different LCA Models
Pol. J. Environ. Stud. Vol. 24, No. 1 (2015), 125-140 DOI: 10.15244/pjoes/26960 Original Research Life Cycle Assessment of Municipal Solid Waste Management Comparison of Results Using Different LCA Models
More informationResearcH JournaL 2010 / VOL 02.01. www.perkinswill.com
ResearcH JournaL 21 / VOL 2.1 www.perkinswill.com Comparative Analysis of Flooring Materials 4. COMPARATIVE ANALYSIS OF FLOORING MATERIALS: Environmental and Economic Performance Ajla Aksamija, Ph.D.,
More informationData and Trends. Environmental protection and Safety
Data and Trends Environmental protection and Safety 2006 EMS-GRIVORY Performance Polymers EMS-GRIVORY Extrusion Polymers EMS-GRILTECH EMS-PRIMID EMS-PATVAG EMS-SERVICES Data and Trends 2006 Protection
More informationLife Cycle Assessment of Reusable and Single-use Plastic Bags in California
California State University, Chico Institute for Sustainable Development Life Cycle Assessment of Reusable and Single-use Plastic Bags in California January 2011 Produced under contract by: California
More informationFraunhofer System Research for E-Mobility (FSEM) Current LCA results and need for further research
Fraunhofer System Research for E-Mobility (FSEM) Current LCA results and need for further research Fraunhofer System Research for E-Mobility (FSEM) Current LCA results and need for further research Dipl.-Ing.
More informationEnergy Metrics and Measurements
nergy Metrics and Measurements Introduction The energy demand for a production process affects the environmental impact substantially. Reasons for this are the emissions and wastes generated during the
More information