MITUTOYO - DEPTH GAGES

Transcription

1 Precision Measuring Equipment and Industrial Supplies since W. Chicago Ave. Chicago, IL Ph: Fax: MITUTOYO - DEPTH GAGES DEPTH GAGES Digimatic Depth Gages w/absolute Encoder - Series 547 Q-2 Dial Depth Gages for Rapid, Direct Reading Meas. of Hole Depth Q-3 Back Plunger Dial Depth Gages Q-4 Digimatic Depth Micrometers - Series 329 Q-5 Digit Depth Micrometers - Series 229 Q-6 Depth Micrometers - Series 129 Q-7 Half-Base Depth Micrometers - Series 129 Q-8 Digimatic Depth Gages w/absolute Encoder - Series 571 Q-9 Digimatic Depth Gage - Series 700 Q-10 Dial Depth Gages - Series 527 Q-11 Vernier Depth Gages - Series 527 Q-12

2 4.13"(105) DEPTH GAGES Digimatic Depth Gages with Absolute Encoder Series ABSOLUTE TECHNOLOGY Optional Accessories Base Only (3/8" Dia. Hole) Part No. Length Remark " , 7217, 7237, " , 7218, 7238, ø2.38"(ø60.5) / mm ZERO/ ABS PRESET +/- ON/ OFF TOL.. Digital readout for error-free reading. Uses IDC Type Digimatic Indicator with exclusive Absolute Encoder. Face rotates 330 for use at different angles. Provided with a data output port for connection with SPC system. Power supply: Silver oxide cell (SR-44 1 pc). Battery life: 5,000 hours Provided GO/NG judgement function and the indication of the judgement result. Contact point = 4-48 UNF (16) ø(ø16) 4"(101.6) Standard Accessories Extension rods (4 pcs.):.5", 1", 2", 4" Interchangeable stylus (1 pc.) Allen wrench (1 pc.) Battery SR-44 (1 pc. No ).65" (16.5).43" (10.8).72" (18.4) Unit: (mm) Digimatic Depth Gages with Absolute Encoder (with SPC output) /Metric LCD Spindle Base Measuring Base Order No. Range Resolution Stroke Length Force Accuracy Flatness Remarks ".0005".5" 2.5" 1.5N.001".0002" with Extension 0 200mm 0.01mm or less Rods (4 pcs) ".0005".5" 4" 1.5N.001".0002" with Extension 0 200mm 0.01mm or less Rods (4 pcs) ".00005".5" 2.5" 1.2N.00012".00008" with Extension 0 200mm 0.001mm or less Rods (4 pcs) ".00005".5" 4" 1.2N.00012".00008" with Extension 0 200mm 0.001mm or less Rods (4 pcs) For SPC output order Connecting Cable (1m) or (2m). Q-2

3 Dial Depth Gages for Rapid, Direct Reading Measurements of Hole Depth " " (2.5" or 4.0") The Dial Indicator has a precision-ground, hard-chromeplated stem with standard AGD 3/8" diameter. Contact point is hardened, ground and chrome-plated steel. Spindle rack, pinions and pivots are hardened stainless steel to insure long wear and continuing accuracy. Bezel is cleanly knurled and smoothly adjustable with a clamping screw for positive settings. Accuracy of the Dial Indicator exceeds Federal. Rods are available in 1", 2" and 4" lengths and may be connected for depths up to 8". (1" on Dial Indicator + 1" rod + 2" rod + 4" rod = 8".) 10, 20, 30 and 100mm rods for Metric model. Dial Depth Gages Dial Spindle Order No. Range Resolution Stroke Remarks ".001" 1.0" Measuring Force: 2.0N or less Base Length: 2.5" ".001" 1.0" Measuring Force: 2.0N or less Base Length: 4.0" Metric Dial Spindle Order No. Range Resolution Stroke Remarks mm 0.01mm 10mm Measuring Force: 1.4N or less Base Length: 101.6mm with Limit Hands (2 pcs) No. 2904F Dial Indicator is used for inch models. No. 2902FEB for metric. Spindle lifting lever for raising and lowering and spindle is maintained under spring pressure. Bottom surface of the base is hardened, ground and lapped for highest degree of flatness. Complete with fitted carrying case. The Dial Indicator is attached to the base by a clamping screw and readily interchangeable with any other standard AGD dial indicator. STANDARD ACCESSORIES Order No. Description " Rod " Rod " Rod Contact Point Metric Order No. Description mm Rod mm Rod mm Rod mm Rod Contact Point Q-3

4 Back Plunger Dial Depth Gages " " " " 2.5" 4.0" These Dial Depth Gages are designed with the Back Plunger Indicators for upward facing readings. With the supplied extension rods, depths of up to 8" can be measured. Select either a small or large base to suit your requirements. Dial Indicator No Dial face: 50 0 (one rev.) Accuracy (forward): less than ±.001" Standard Accessories: Extension rods (4 pcs.):.5, 1, 2, 4" Exchangeable stylus (1 pc.) Allen wrench (1 pc.) Back Plunger Dial Depth Gage Dial Spindle Base Order No. Range Resolution Stroke Length Remarks ".001".20" 2.5" Measuring Force: 1.4N or less with Extension Rods (4 pcs) ".001".20" 4" Measuring Force: 1.4N or less with Extension Rods (4 pcs) Q-4

5 Digimatic Depth Micrometers Series ".72".12" 1.73".06".12" 2.56".67" " ø.16" Color of frame:white (No 6) ø.72" interchangeable rods (6 or 12psc). Preset capability. Set any desired measurement on the display and recall that measurement. Instant in/mm conversion Measurement hold key Zero-Set key allows for setting zero measurement at any point along spindle. Each unit comes complete with a battery (offers 6 months of life under normal use), key spanner, other adjusting wrenches, fitted carrying case, manual. SPC output provided. Data Send button for transmitting readings to SPC systems. Measuring force: 6 10N Locking clamp. Runs off single SR44 battery. Automatic power-off after 20 min. idle time. Accuracy Flatness of reference face (bottom face of base):.00008" for 4" base Flatness of measuring face of rod: "/0.3µm Parallelism between reference face and measuring face:.00016" " x ( L* )/(4 + L/50)µm 2" (*truncated after decimal point.) L = maximum measuring length Zero point error of rod: ±(.00008" " x L* )/±(2 + L/75)µm 3" (*truncated after decimal point.) L = maximum measuring length Micrometer Head Accuracy: ±.00012"(±3µm) Digimatic Depth Micrometer (with SPC output) /Metric LCD ".00005" with Interchangeable Rods: 6 pcs mm 0.001mm ".0001" with Interchangeable Rods: 12 pcs mm 0.001mm Depth Micrometer (with SPC output) Metric mm 0.001mm with Interchangeable Rods: 6 pcs For SPC output order Connecting Cable (1m) or (2m). Replacement Battery: (1pc), (10pcs/SET). Q-5

6 Digit Depth Micrometers Series 229 Interchangeable Rod Type with Mechanical Digit Counter " (2.5" or 4.0").98" 1.56".96".67".31".04" Base Thickness: The Digital Counter of this depth micrometer provides clear, accurate readings in thousandths. Conventional models with reversed thimble and sleeve were rather awkward and took extra attention and a long time to read. With MITUTOYO s Digit Depth Micrometers, the reading is shown in decimals to thousandths of an inch. Conventional Sleeve/Thimble is still provided to double check the digital counter. Interchangeable rod diameter.157". Clear, crisp graduations on the thimble. No-glare satin-chrome finish. Complete with fitted carrying case. (No ) Digit Depth Micrometers ".001" with Interchangeable Rods: 4 pcs Base Length: 2.5", Flatness:.00005" ".001" with Interchangeable Rods: 6 pcs Base Length: 2.5", Flatness:.00005" ".001" with Interchangeable Rods: 4 pcs Base Length: 4.0", Flatness:.00008" ".001" with Interchangeable Rods: 6 pcs Base Length: 4.0", Flatness:.00008" Q-6

7 Depth Micrometers Series 129 Interchangeable Rod Type Spindle clamp located on the rear side of the base..04" (0 to 1") 1.56".96".67" (2.5" or 4.0").157" Instrument accuracy ±.00015" Metric ±0.003mm Ratchet stop for consistent and repetitive measurements..157" DIA. interchangeable rods, with lapped measuring end, are calibrated and tested at the factory. The rod length can be adjusted, to compensate wear on the measuring tip, with two supplied wrenches Satin-chromed finished throughout. Crisp clear graduations on the thimble Complete with fitted carrying case Depth Micrometers Accuracy Flatness of reference face (bottom face of base):.00005" for 2.5" base/1.3µm for 63.5mm base.00008" for 4.0" base/2µm for 101.6mm base Flatness of reference face (bottom face of base):.0001"/2.3µm Zero point error of rod: L ±(.00008" "x 3 ) L=Maximum measuring length Truncated after decimal point. Order No. Range Resolution Base Length Remarks ".001" 2.5" with Interchangeable Rods: 4 pcs ".001" 2.5" with Interchangeable Rods: 6 pcs ".001" 2.5" with Interchangeable Rods: 12 pcs ".001" 4.0" with Interchangeable Rods: 4 pcs ".001" 4.0" with Interchangeable Rods: 6 pcs ".001" 4.0" with Interchangeable Rods: 12 pcs. Metric Order No. Range Resolution Base Length Remarks mm 0.01mm 63.5mm with Interchangeable Rods: 2 pcs mm 0.01mm 63.5mm with Interchangeable Rods: 4 pcs mm 0.01mm 63.5mm with Interchangeable Rods: 6 pcs mm 0.01mm 101.6mm with Interchangeable Rods: 4 pcs mm 0.01mm 101.6mm with Interchangeable Rods: 6 pcs. Q-7

8 .04" DEPTH GAGES Half-Base Depth Micrometers Series 129 Interchangeable Rod Type Locking clamp on reverse side holds measurements ".4" 2.4" 2.0".22".315" 2.56".67" Half-Base Depth Micrometers are made to measure the depth of holes, slots or steps in locations where shoulders, corners, walls or flanges do not permit the use of a full-base depth micrometer. The very wide () and micro-lapped base assures stability while measuring and a high degree of accuracy. The micrometers are completely satin-chrome finished. Half-Base Depth Micrometers Ratchet stop for consistent and repetitive measurements..157" DIA. interchangeable measuring rods have hardened, ground and lapped ends, to assure accuracy over long usage. Locking clamp to hold measurements. Crisp, clear graduations on the thimble. Supplied with fitted carrying case ".001" with Interchangeable Rods: 4 pcs ".001" with Interchangeable Rods: 6 pcs Q-8

9 Digimatic Depth Gages with Absolute Encoder Series 571 with SPC output ABSOLUTE TECHNOLOGY Dimension for 18" Model 9.84".315" 1.08" 2.56" 2.56" 2.56" 1.08" Dimensions for 6, 8 & 12" Models.39".276".197" (diameter) Dimensions Range A B C D 0 6"/0 150mm 9.33" 2.88" 1.30" 0 8"/0 200mm 11.30" 0 12"/0 300mm 15.87" 3.54" 1.65" 0 18"/0 450mm 24.92" 4.45" 2.09".79" No rack, no pinion, no glass scale. Linear Scale is safely embedded in the hardened stainless steel blade. Sliding LCD unit offers push button control for in/mm selection, absolute zero setting and turning the display on and off. Battery life is approximately two years with normal use..51" Digimatic Depth Gages with Absolute Encoder (with SPC output) /Metric LCD.345" (diameter) 3.94".20" 2.756".79" B A LCD unit displays E-o5 for movement error and B for battery replacement. Note: sliding unit can be moved as fast as 40" per second. Power supply: Silver oxide cell (SR-44 1 pc.) OPTIONAL EXTENSION BASES Order No. Base Sizes Order No. Range Resolution Accuracy Remarks ".0005" ±.001" Absolute Function Type 0 150mm 0.01mm ".0005" ±.001" Absolute Function Type 0 200mm 0.01mm ".0005" ±.0015" Absolute Function Type 0 300mm 0.01mm ".0005" ±.002" 0 450mm 0.01mm ".0005" ±.002" 0 600mm 0.01mm Metric (Metric only model has metric scale and no inch/mm button) with SPC output Order No. Range Resolution Accuracy Remarks mm 0.01mm ±0.03mm Absolute Function Type SPC output order connecting cable (1m) or (2m) for Absolute Function type. C " " " D Q-9

10 Digimatic Depth Gage Series A convenient and quick gage to accurately measure like tire tread depth. Large LCD for error-free readings in inch or mm. Zero-Set at any point for comparison measurements. Operates on one SR-44 battery cell (#541980) which will provide approx. 2 years of use. Tire Tread Depth Gage. Unit: (mm) Digimatic Depth Gage /Metric Order No. Range LCD Resolution Accuracy Remarks ".001" ±.008" Plastic body with 0-25mm 0.1mm ±0.2mm metal depth rod Q-10

11 Dial Depth Gages Series ".433'.15" Thickness.157".39".276".197" (diameter) RANGE A 0 6"/0 150mm 10.24" 0 8"/0 200mm 12.20" 0 12"/0 300mm 16.14" 3.94".16" 2.76".79" 1.36".43" Easier and faster reading Depth Gage. Made of hardened stainless steel. Base and measuring surfaces are hardened and microlapped. 4" standard base size. OPTIONAL Dial Depth Gages Wider extension bases are available as optional item. With fine-adjustment feature. Complete with fitted carrying case. EXTENSION BASES Order No. Base Sizes " " " Dial ".001" with Fine Adjustment Feature ".001" with Fine Adjustment Feature Metric Dial mm 0.05mm with Fine Adjustment Feature mm 0.05mm with Fine Adjustment Feature mm 0.05mm with Fine Adjustment Feature 2.76" A Q-11

12 Vernier Depth Gages Series ".276".197" (diameter) 1.08".98".51".354 (diameter) OPTIONAL EXTENSION BASES Order No. Base Sizes " " Made of hardened stainless steel. Base and measuring faces are hardened and microlapped. Wider extension bases can be attached. 3.94".16" 6", 8" & 12" Models only " Dimensions Range A B C D 0 6"/0 150mm 10.24" 0 8"/0 200mm 12.20" 2.76" 1.36".43" 0 12"/0 300mm 16.14" 2.76" 0 24"/0 600mm 31.50" 0 40"/0 1000mm 47.24" B A.79" C D 4.33" 2.01".79".315" 1.08" 2.56" 2.56" 2.56" 1.18" 24" & 40" Models only Vernier Depth Gages ".001" with Fine Adjustment Feature ".001" with Fine Adjustment Feature ".001" with Fine Adjustment Feature ".001" with Fine Adjustment Feature ".001" with Fine Adjustment Feature Metric mm 0.02mm with Fine Adjustment Feature mm 0.02mm with Fine Adjustment Feature mm 0.02mm with Fine Adjustment Feature mm 0.05mm mm 0.05mm Q-12