1000W equivalent LED area lights.

Transcription

1 W equivalent LED area lights. Up to 7, lumens. RABWEB.COM

2 ALED6 Replace up to W metal halide area lights, saving up to $68 annually per fixture Available in Type II, III and IV distributions, and in 6W or 6W Optional integrated motion sensor/photocell for multi-level control Optional bi-level dimming (enables 5, 5 or 75% dimming)* Multiple mounting options: pole, slipfitter or wall 5 Pin and 7 Pin ANSI 6.4 control receptacles available,-hour LED lifespan All are DLC listed except slipfitter models IP66 RATING *Consult factory for details. Patent-pending Air Flow technology for superior thermal management Twistlock photocell can support up to 48V. Optional, factory-installed Lightcloud Controller (see back page). Optional motion sensor/photocell for multi-level control. Two detection patterns available.

3 Photometrics ALED 6W TYPE II 5 Mounting Height Photometric Report #RAB585 ALED 6W TYPE II 5 Mounting Height Photometric Report #RAB ALED 6W TYPE III 5 Mounting Height Photometric Report #RAB85 ALED 6W TYPE III 5 Mounting Height Photometric Report #RAB ALED 6W TYPE IV 5 Mounting Height Photometric Report #RAB8 ALED 6W TYPE IV 5 Mounting Height Photometric Report #RAB Grid scales: Multiples of mounting height Values shown in footcandles Mounting Height Multiplier

4 Dimensions & weights POLE MOUNT ALED Weight: 79 lbs. EPA:. 5/8 854 mm 6 / 65 mm SLIPFITTER MOUNT ALED Weight: 75 lbs. EPA: 5. 9 /4 756 mm 6 / 65 mm 4 69 mm 4 69 mm /4 8 mm / 57 mm / 57 mm WALL MOUNT (WPLED) Weight: 8 lbs. FLAT WALL MOUNT (WPLED) Weight: 78 lbs. 7 / 9 mm 6 / 65 mm 7 / 9 mm 6 / 65 mm 6 /8 97 mm 6 / 67 mm 4 69 mm 4 69 mm / 64 mm 7 / 9 mm / 57 mm 7 / 9 mm / 57 mm Accessories GDALED6W Wire Guard RSP- kv Surge Protector (V) RSP-77 kv Surge Protector (77V) RSP-48 kv Surge Protector (48V) GDALED6P Polycarbonate shield RPA-ALED6 RPA5-ALED6 RPA4-ALED6 RPA5-ALED6 RPA6-ALED6 Round pole adapter for,, 4, 5 or 6 pole.

5 ALED 6/6 Specifications UL Listing: Suitable for wet locations LEDs: Multi-chip, high-output, long-life LEDs Lifespan:,-hour LED lifespan based on IES LM-8 results and TM- calculations IP Rating: Rated IP66, protected against dust and water ingress Drivers: 6W: Class, Constant current, - 77V and 48V, 5/6 Hz, V:.A, 8V:.8A, 4V: A, 77V:.A, 4kV surge protection 6W: Class, Constant current, - 77V and 48V, 5/6 Hz, V:.A, 8V:.A, 4V:.A, 77V:.A, 4kV surge protection Dimming: -V dimming standard Ambient Temperature: Suitable for use in 4 C ambient temperatures Cold Weather Starting: The minimum starting temperature is -4 C Thermal Management: Superior thermal management with external Air Flow fins Housing: Die-cast aluminum Mounting: Pole mount arm, slipfitter, wall mount arm, flat wall mount. Lens: Tempered glass Reflector: Vacuum-metalized polycarbonate Optics: Type II, Type III and Type IV available Gaskets: High-temperature silicone gaskets Color Stability: LED color temperature is warrantied to shift no more than K in CCT over a 5 year period. Color Uniformity: RAB s range of CCT (Correlated Color Temperature) follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C Finish: Our environmentally friendly polyester powder coatings are formulated for high-durability and long-lasting color, and contain no VOC or toxic heavy metals. Green Technology: Mercury and UV free, and RoHS compliant. Polyester powder coat finish formulated without the use of VOC or toxic heavy metals. IESNA LM-79 & LM-8 Testing: RAB LED luminaires have been tested in accordance with IESNA LM-79 and LM-8, and have received the Department of Energy Lighting Facts label. 6W Type II Distribution Color Temperature 5K 4K K Input Watts Output Lumens 6,664 5,88 5,99 Lumens Per Watt Color Accuracy (CRI) Type III Distribution Color Temperature 5K 4K K Input Watts Output Lumens 6,76 6,7 4,977 Lumens Per Watt 97 Color Accuracy (CRI) Type IV Distribution Color Temperature 5K 4K K Input Watts Output Lumens 7,66 6,88 5,786 Lumens Per Watt 4 Color Accuracy (CRI) W Type II Distribution Color Temperature 5K 4K K Input Watts Output Lumens 7,99 7,69 6,74 Lumens Per Watt 6 5 Color Accuracy (CRI) Type III Distribution Color Temperature 5K 4K K Input Watts Output Lumens 8,7 6,74 6,89 Lumens Per Watt 7 6 Color Accuracy (CRI) Type IV Distribution Color Temperature 5K 4K K Input Watts Output Lumens 7,48 8,99 6,888 Lumens Per Watt 5 8 Color Accuracy (CRI) Ordering information Product Family Distribution Wattage Color Temp Mounting Finish Driver Options ALED Sensor Options T T 4T Type II Type III Type IV * Not available for slipfitter models. Not available for 48V models. 6 6W 6 6W N Y 5K 4K K SF Pole Slipfitter W Bronze White /D -77V, -V Dimming /48/D 48V, -V Dimming /PCT -77V Twistlock photocell /PCT4 48V Twistlock photocell /WS4 Motion sensor/photocell (4 H/6 D) * /WS Motion sensor/photocell (4 H/ D) * /LC Lightcloud Controller* /5PR 5 Pin Receptacle* /7PR 7 Pin Receptacle* Product Family Distribution Wattage Color Temp Mounting Finish Driver Options Sensor Options WPLED T T 4T Type II Type III Type IV * Not available for flat mount models. Not available for 48V models. 6 6W 6 6W N Y 5K 4K K Arm FX Flat mount W Bronze White /D -77V, -V Dimming /48/D 48V, -V Dimming /PCT -77V Twistlock photocell /PCT4 48V Twistlock photocell /WS4 Motion sensor/photocell (4 H/6 D) * /WS Motion sensor/photocell (4 H/ D) * /LC Lightcloud Controller* /5PR 5 Pin Receptacle* /7PR 7 Pin Receptacle*

6 ALED6 available with Lightcloud. Lightcloud is a commercial wireless lighting control system and service, fully developed and supported by RAB. Save up to 68% on energy costs from lighting Use your mobile device, tablet or computer for switching and dimming of individual fixtures or entire areas Programmable schedules let you illuminate a zone only when needed, automatically adjusting for sunrise and sunset times Complimentary rebate assistance and lighting design services Contact RAB at for a quote or visit rabweb.com.