Mark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.
|
|
|
- Damon Morris
- 7 years ago
- Views:
Transcription
1 Mark 53/54 Series ifferential Back Pressure Regulators The Jordan Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for both differential and remotely adjusted applications. The Mark 54 provides the same flow capacity as the Mark 53 but with less offset in controlled pressure due to larger diaphragm. The valve is normally closed. The inlet pressure acts beneath the diaphragm and is opposed by the force of the adjusting spring plus the pressure of the loading fluid. As the inlet pressure overcomes the set point (the combined pressures on top of the diaphragm), the valve moves toward the open position, relieving the necessary pressure to maintain the set point. Features Mark 53/54 maintains a constant differential between the inlet pressure and the pressure loaded to the top of the diaphragm. Sliding Gate Seats all of Jordan Valve s differential regulators feature advanced sliding gate seat technology. Straight-through flow for reduced turbulence and quiet operation Short stroke for fast response and accurate regulation Easily interchangeable v s Tight Shutoff Specifications s: (Note: 1/4 (N8) & 3/8 (N12) use 1/2 (N) body with reducer bushings) Mark 53/53HP: 1/4 (N8) through 2 (N50) Mark 54: 1/4 (N8) through 3/4 (N) End onnections: Threaded FNPT, BSPT, BSPP ANSI s 0#, # IN s PN10/16, PN25/40 Body Materials: uctile Iron Bronze arbon Steel A216 WB Stainless Steel SA351 F8M Trim Materials: 303 T Standard on uctile Iron, Bronze, or arbon Steel valves 316T Standard on Stainless Steel valves Seat Materials: Jorcote on T Standard Other materials available onsult factory Pressure Regulators Mark 53 ifferential Back Pressure Regulators Jordan Valve, a division of Richards Industries 3170 Wasson Road incinnati, OH (f) info@richardsind.com
2 Specifications (ont'd) iaphragm Materials Stainless Steel Standard Buna-N Viton Jorlon Spring Housing Materials: uctile Iron Service: Steam, oil, gas, air, chemicals, and water Shutoff: ANSI lass IV Body Rating: Body Matl. I S End onn. PN #FE 600#FE PN #FE PN #FE 600FE PN #FE 600#FE - to 100 F 0 F F 400 F 500 F 600 F 650 F (500) (475) (425) (525) (375) (495) (325) (465) (450) (500) (475) (425) (375) (325) (740) (675) (665) (635) (550) (905) (535) (890) (7) (6) (560) (5) (480) (450) (905) (445) (890) Note: ouble bolting option is required to reach pressures indicated in parenthesis ( ). For temperatures below - F or above 650 F, consult factory Note: To convert temperature to elsius: subtract Fahrenheit temperature by 32, multiply result by 5, divide answer by 9, final answer to temperature in elsius ((F-32)*5/9 = ). To convert PSI to BAR, divide by Maximum ome Loading Pressure: the combined pressure of the spring setting (psig) and dome loading (psig) must not exceed the body rating. Options: B: ouble bolting for higher pressure ratings : losing cap for adjusting screw B: Bleed valve on spring housing (available only with option closing cap above) H: Handwheel and packing box F: Flow-through spring housing. Permits in-oil-line installation for fuel oil atomization and steam atomizing systems. Reduces the possibility of the oil asphalting on top of the diaphragm : Separated double diaphragm (prevents mixing fluids in case of ruptured diaphragm) HP: High pressure spring housing H: Handwheel and packing box ifferential Pressure ontrol Ranges, PSI (BAR) Model Ranges in psi (bar) MK53 MK53HP MK54 1/4" - (N8 - ) 1" - 2" (N25 - N50) - 2" (N-25) 1/4" - (N8-) 2- (0,14-1,39) (2,07-9,31) 1/2-4 (0,03-0,28) 8- (0,55-1,38) (5,17-13,10) 1/2-5 (0,03-0,34) (0,60-2,07) (2,76-7,24) (0,69-2,07) (5,52-12,76) 2-6 (0,14-0,41) -80 (1,03-5,52) (6,89-22,06) 2-10 (0,14-0,69) -50 (1,38-3,45) 25-0 (1,72-10,34) -45 (1,38-3,10) 4-13 (0,28-0,90) 45-0 (3,10-10,34) (10,34-31,03) 2- (0,14-1,38) -70 (1,38-4,83) (2,07-11,72) v (Kv) Value & Maximum ifferential Pressures v (Kv) Seat Material Max. P PSI (bar) 0.84 (0,74) 1/4" (N8) Jorcote 400 (27,6) 1.6 (1,4) 3/8" (N12) Jorcote 400 (27,6) 2.5 (2,2) & 4.4 (3,8) (N & N) Jorcote 400 (27,6) 6.4 (5,5) 1" & 1-1/4" 9.5 (8,2) (N25 & N32) Jorcote 400 (27,6) (12,9) 1- ( N40) Jorcote 325 (22,4) 25 (21,5) 30 (25,8) 2" (N50) Jorcote 325 (22,4) * Low Flow Trim: reduced v s (Kv s) can be placed in any size valve as long as it is smaller than the standard v (Kv) for that particular size. In addition, the following special low flows can be provided: 1.6 (1,38) 0.02 (0.017) 0.84 (0,72) (0,007) 0.42 (0,36) (0,003) 0.21 (0,18) (0,0017) 0.08 (0,07) 0.04 (0,03) (not in 316) (0,0007) -2-
3 Mark 53 Series imensions B d Ends 1" 1¼" 1½" 2" ANSI 0# # # # # # # # # # # # d Ends, IN E (PN) (kg) 10/ ,9 6,8 25/ ,4 7,3 A A / ,4 7,3 25/ ,3 7,7 10/ ,8,4 25/ ,7 16, / ,7 25/ , / ,1,9 25/ ,9 23, / ,9 22,7 25/ ,2 24,9 Threaded Ends & 1" ¼" ½" 2" Threaded Ends, IN & 25 (kg) , , , , , , , , ,9
4 Mark 54 Series imensions B E A A 1 d Ends ANSI 0# # # # d Ends, IN (PN) (kg) 10/ / / , / ,3 13 Threaded Ends Threaded Ends, IN (kg) , , , , , , , ,9-4-
5 MK53/54/0916 Ordering Schematic To specify a MK53/54 ifferential Back Pressure Regulator, build a model number by making a selection from each category in the Product esignator oding System below / Model 53 Standard 54 Large iaphragm 2 Options losing ap Separated ouble iaphragm F Flow Through ome H Handwheel HP High Pressure /4" (N8) 038 3/8" (N12) 050 (N) 075 (N) 100 1" (N25) /4" (N32) 0 1- (N40) 0 2" (N50) 4 Body Material I uctile Iron S arbon Steel BR Bronze S6 Stainless Steel 5 End onnections PT NPT BT BSPT BP BSPP SW FSW I5 0#IFE S or T valves I3 #IFE S or T Valves F5 0#IFE I or BR F3 #IFE I or BR I7 IFE PN10 I6 IFE PN16 I8 IFE PN25 I4 IFE PN40 6 Trim S3 303 I3 303 F/IFE (-2") S6 316 I6 316 F/IFE (-2") 7 Seat Material A 303T W 316T/Jorcote B 316T X 303/Jorcote/Jordanic V 303/Jorcote Y 316/Jorcote/Jordanic 8 v Kv , , , , , , , , ,9 A 25 21,5 B 30 25,8 9 Range, PSI MK53 1/4" - MK53 1" - 2" / A MK53HP - 2" MK54 A /2-5 A A iaphragm S6M 316T VIE Viton BNE Buna-N JLE Jorlon Jordan Valve, a division of Richards Industries 3170 Wasson Road incinnati, OH (f) info@richardsind.com
PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM
PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM PRESSURE REDUCER AND RELIEF VALVES These devices are used to reduce and control a gaseous flow pressure (air, steam, gas ). The PRESSURE
MODEL 201 225LP 225LP2 225LP4 Safety Relief Valves
Edition GDRV.06 BRYAN DONKIN RMG CANADA LIMITED Serving the Gas Industry WORLDWIDE Applications Specifically designed to protect the downstream system or equipment from over pressure conditions by discharging
DOUBLE SEAT BRONZE BODY HIGH CAPACITY
PS593DB HEAVY DUTY BRONZE GLOBE CONTROL VALVES DB DOUBLE SEAT BRONZE BODY HIGH CAPACITY 1, 1-1/4, 1-1/2, and 2 Union Ends ANSI Class 250 Body Rating ANSI Class II Close off Bronze or Stainless Steel Trim
1805 Series Relief Valves
October 2011 1805 Series Relief Valves P1026 1805G Type 1805-2 Type 1805-4 Figure 1. Typical 1805 Relief Valves Introduction The 1805 Series relief valves are designed for use in farm tap applications
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves
Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
REGULATORS D& HD Series
Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2002 Watson McDaniel Company Ductile Iron body - HD Series Full port strainer & blowdown valve on pilot
Fittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
Float and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
SLAM-SHUT VALVE. Type OSE. Europe, Middle East, Africa and Asia Pacific Documents Only. Process Management TM
SLAM-SHUT VALVE Type OSE Process Management TM DESCRIPTION The purpose of the OSE slam shut valve is to totally and rapidly cut off gas flow when the outlet pressure exceeds or drops below the setting.
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
REGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve
High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves Features Top guided design offers high capacity with 0.110 in 2 [0.710 cm 2 ] orifice area.
Types 66R and 66RR Low-Pressure Relief Valves
November 2009 Types 66R and 66RR Low-Pressure Relief Valves W1953 W1908 TYPE 66R RELIEF VALVE TYPE 66RR RELIEF VALVE Figure 1. Typical Constructions Introduction Types 66R and 66RR low-pressure throttling
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
Flygt Ball Check Valves
4/13 Supersedes: 6/96 The basic purpose of a check valve is to permit flow in one direction, prevent flow in the opposite direction and perform this function automatically and with minimum maintenance.
GS-General Service Control Valves
GS-General Service Control Valves GS-General Service Valves The GS-General Service Valves continue Copes-Vulcan s tradition of designing and manufacturing control valves that provide both exceptional service
Type 92S Pilot-Operated Steam Regulator
Type 92S Pilot-Operated Steam Regulator Introduction The Type 92S steam regulator is piston actuated for high cycle steam service which includes a Type 6492L, 6492H or pilot (see Figure 1). These pilots
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
1800C and 1800C-HC Series Service Regulators. Technical Bulletin
and -H Series Service Regulators Technical Bulletin and -H Series Service Regulators 0 Elster American Meter The Series pressure regulators are designed to control natural gas, air, nitrogen, carbon dioxide,
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
Direct-Operated Pressure & Temperature Regulating Valves
Direct-Operated & Temperature Regulating Valves Direct-Operated are used for controlling pressure or temperature in a variety of applications. Regulating Valves Page No. Cast Iron 3/8 2 Page No. O Series
HOSES COMPOSITE HOSES & FITTINGS HOSES. Pag. 5J533 TANK CLEANING 10 BAR (150 PSI) BS5842 ARRETE' ADR ANNEXE 1
COMPOSITE S & FITTINGS Pag. S S 5J533 TANK CLEANING 10 BAR (150 PSI) 5J551 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT - 10 BAR (150 PSI) 5J553 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT -
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
The First Line of Safety
Pilot Operated Pressure Relief Valves The First Line of Safety Pilot Operated Pressure Relief Valves 597C Farris Engineering Pressure Relief Valves Process Pressure Relief Valves Series 2600 ASME NB Certified:
AURORA. 1030 AND 1040 Series SUCTION DIFFUSERS, COMBINATION AND TRIPLE DUTY VALVES WWW.AURORAPUMP.COM
UROR 1030 ND 1040 Series SUCTION DIFFUSERS, COMINTION ND TRIPLE DUTY VLVES WWW.URORPUMP.COM UROR 1030 ND 1040 Series Suction Diffusers, Combination and Triple Duty Valves Designed for Direct Mounting on
AIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
ISO 9001 Certified Manufacturing Facility SPECIFICATIONS
TS-250 Rev. 0-00-12-07 Refined Fuels PD Meters Size 2 Type 4-MT & 4D-MT 2 PETROLEUM AND LP-GAS TANK TRUCK METERS 2 4-MT with Air Release, Strainer, Printing Register and Preset Valve 2 4D-MT with Vapor
Solenoid and Air Operated Valves. Supporting Fleet Operations for Over 60 Years
4 Solenoid and Air Operated Valves Supporting Fleet Operations for Over 60 Years This catalog describes solenoid and air operated valves, representative of those manufactured by ASCO Valve, Inc. to meet
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
Pressure and Temperature Controls
Pressure and Controls Pressure Reducing Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air and liquid systems safely and efficiently. And assure uninterrupted
VG2000 Series Cast Iron Flanged Globe Valves
VG2000 Series ast Iron Flanged Globe Valves Installation Instructions Part No. 14-1161-106, Rev. Issued November 15, 2013 Supersedes June 15, 2007 pplications VG2000 Series ast Iron Flanged Globe Valves
5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
Introduction. Angle/Flared/Sequence/Changeover Service Valves. Valves D-193. www.usa.siemens.com/hvac
Introduction Angle/Flared/Sequence/Changeover Service D-193 In this section, you will find flared, angled, sequence and changeover valves for use in service applications. D-194 Need additional assistance?
Automatic Control Valves WATTS EU 100 Series
utomatic ontrol Valves WTTS U Series The Watts Industries range of automatic control valves consist of a hydraulically operated valve, which is controlled by a pilot circuit. The main valve (U ) is the
289 Series Spring-Loaded Relief Valves
October 14 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L and 89U Relief Valves Introduction The
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
Richter Twin Piston Quarter-turn Actuators
Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter
Product Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
Overview of the. measurement and control technology range
Overview of the measurement and control technology range precise innovative Precision - Made in Germany Schubert & Salzer Control Systems GmbH is a medium-sized company in the Schubert & Salzer Group with
Needle Valves. NB, NBH, ND, NDH, NF, NFH, NG, NGH, NR, NRG, NT, NU, NUH, NY and NYH Series. www.fitokgroup.com
Needle Valves NB, NBH, N, NH, NF, NFH, NG, NGH, NR, NRG, NT, NU, NUH, NY and NYH Series www.fitokgroup.com ontents Bar Stock Needle Valves NB Series and NBH Series Nonrotating-stem Needle Valves N Series
POWER PULSE VALVES remote pilot threaded or Quick Mount connection 3/4 to 1 1/2
POWR PULS VLVS pilot threaded or Quick Mount 3/4 to 1 1/2 N 2/2 Series 353 TURS The piston cartridge pulse valves are especially designed for dust collector service applications, combining high flow, long
400B SERIES DIAPHRAGM PUMP
400B SERIES DIAPHRAGM PUMP In today s agricultural and industrial markets, isn t it good to know that you can rely on one name Sotera to fit your chemical transfer needs? The Sotera 400B Series offers
Type 119 Control Valve
Instruction Manual Form 5204 Type 119 December 2009 Type 119 Control Valve Introduction Scope of the Manual This instruction manual provides installation, spring adjustment, maintenance, and parts information
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
SQUARE D INDUSTRIAL CONTROL PRODUCTS
SQUARE D INDUSTRIAL CONTROL PRODUCTS CLASS 9012 3a INDUSTRIAL PRESSURE SWITCHES Type A Heavy duty switch for virtually any industrial application involving air, water, steam or oil Bellows, piston and
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
BIÇAKLI VANALAR/ KNIFE VALVES
IÇKLI VNLR/ KNIF VLVS FG00 - Knife Gate Valve ORITL VLV SOLUTIONS Operations Handwheel, rising stem: Handwheel: hainwheel: Gear bo: lectric actuator: neumatic double acting: Hand lever: neumatic single
Check Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
Free Floating Lever Drain Traps For Loads to 50,000 lb/hr (22,679 kg/hr)...pressures to 1,000 psig (69 bar)
Free Floating ever rain Traps For oads to 50,000 lb/hr (22,679 kg/hr)...pressures to 1,000 psig (69 bar) iquid rainers Table -14. Maximum Operating Pressures for Handling ifferent Specific Gravity iquids
BERMAD Waterworks. Surge Anticipating Control Valve. 700 Series. Model 735-M. Features and Benefits. Major Additional Features
Surge Anticipating Control Valve Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise buildings, sewage,
Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
MP8000 Series Pneumatic Valve Actuators
14-1161- 9, Rev. A Technical Bulletin MP8000 Issue Date March 2016 MP8000 Series Pneumatic Valve Actuators Pre-Assembly Details Page 3 MP8000 Actuator Components 3 Tools Required to Assemble an MP8000
Type EZL Pressure Reducing Regulator for Low Differential Pressure Applications
Type EZL Pressure Reducing Regulator for Low Differential Pressure Applications May 2016 W8962 Figure 1. Type EZL Pressure Reducing Regulator Features Main Diaphragm The main diaphragm is Nitrile (NBR)
WD600 STEAM TRAPS. Thermodynamic Steam Trap
WD600 Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company WD600, WD600L Sizes 3/8, 1/2, 3/4, 1 NPT Material Stainless
KF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
Plate heat exchanger. Applications General heating and cooling duties. Heating by means of steam.
M3 Plate heat exchanger Applications General heating and cooling duties. Heating by means of steam. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes
Type 99 Pressure Reducing Regulator
Instruction Manual Form 589 Type 99 February 2016 Type 99 Pressure Reducing Regulator! WARNINg Since a pilot-operated regulator is constructed of both a pilot and a main valve, care should be used not
Needle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
Air Eliminators and Combination Air Eliminators Strainers
Description Air Eliminators and Combination Air Eliminator Strainers are designed to provide separation, elimination and prevention of air in piping systems for a variety of installations and conditions.
Type 99 Pressure Reducing Regulator
Bulletin 7: February 2016 Type Pressure Reducing Regulator W27 W76 Figure 1. Typical Type Regulator Introduction The Type gas regulators provide a broad capacity for controlled pressure ranges and capacities
CCI 100 DPC DRAG Wellhead Production Choke Valve
CCI 100 DPC DRAG Wellhead Production Choke Valve 2 Severe service DRAG choke valve delivers precise wellhead pressure control with superior reliability and life. Improves well production time Enhances
Charts (Section XI) www.accordintl.com Ph. (713) 641-2288 Fax (713) 641-3636 Main PAGE #
Charts (Section XI) Part No. Description Page No. Fraction, Decimal, and Millimeter Conversion Chart 2 Measurement Chart (Metric & Standard) 3 Standard (ANSI B16.5) Flange Dimension Chart 4 Metric Flange
Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications
Instruction Manual Form 5753 Type HSR February 014 Type HSR Pressure Reducing Regulator for Residential, Commercial or Industrial Applications P154 TYPE HSR ANGLE BODY P175 TYPE HSR STRAIGHT Figure 1.
PLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
Fisher D3 Control Valve
D3 Valve Product Bulletin Fisher D3 Control Valve The Fisher D3 control valve is a compact, rugged valve designed for on/off or throttling control, and utilizes FloPro technology, using either pneumatic
WATER PRESSURE REDUCING VALVES
MADE IN THE USA WATER PRESSURE REDUCING VALVES TABLE OF CONTENTS PRODUCT PAGE How Pressure Reducing Valves Work 3 36 Series 4 36C Series 6 36H Series 8 AUTOMATIC PRESSURE REDUCTION Pressure reducing valves
! WARNING. Before using product, read and understand instructions.
McDonnell & Miller Installation & Maintenance Instructions MM-600G) Series FS8-W General Purpose Liquid Flow Switch OPERATION This control is an independently mounted water flow sensing device that makes
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
VIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Issue G Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
Baumann 81000 Mikroseal Control Valve
Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where
VALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
Series 830. Direct Acting Steam PRV. Typical Installation. Selection. Other Series 800 Steam Regulators. Series 810 PRV
Series 8 Direct Acting Series 8 Direct Acting Other Series 8 Regulators Typical Installation Series 8 supply Series 82 Series 8 Safety ale Strainer Series 8 PRV ondensate Series 8 uced Direct Acting PRV
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire