Saving lighting costs? Without a doubt!

Transcription

1 Saving lighting costs? Without a doubt! LIGHT & L i f e I E. K. O L I G H T MANAGEMENT

2 L I G H T M A N A G E M E N T F O R Y O U R R E S I D E N T S Projects already implemented Frankfurt a. Main Darmstadt Coburg Bad Kissingen Aschaffenburg Bayreuth Bamberg Tirschenreuth Fürth Sinsheim Erlangen Nürnberg E.K.O.miniExxA Neumarkt i.o. Crailsheim Heilbronn Stuttgart Regensburg Aalen Zwiesel Deggendorf Göppingen Ingolstadt Passau Landshut München Landsberg a.l. Schwenningen Memmingen Donaueschingen E.K.O.mini.ExxA.FR (for wet rooms) Rosenheim Leutkirch Salzburg Lindau Garmisch-Partenkirchen St. Gallen Bregenz Dornbirn Innsbruck More light at reduced costs For years now, cities and other communities have faced the challenge of how they can reduce their expenses for operation of In addition to numerous projects executed in Germany and Austria, E.K.O. Energie company E.K.O. Energie Kosten Optimierung GmbH allow energy savings of up to 40% in the operating of lighting systems. the Czech Republic, France, South Korea, and Turkey. road and street lighting while at the same time retaining the safety that good lighting systems provide. Solutions from the E.K.O. Energie Kosten Optimierung GmbH Services provided by E.K.O. begin with patented products for the efficient con- lems, without obligation on the client s tasks is enhancement of lighting quality, following: offers especially developed concepts and trol of public lighting. One of our primary with cost reductions at the same time and full consideration taken of the financial situations being faced by cities and other communities. Our customers profit from our more than one decade of experience and from the expertise of our highly qualified staff and partners. 2 consulting on technical lighting probpart. Our work here is focused on the Reduction of power costs Enhancement of lighting characteristics Extension of maintenance intervals Daylight-dependent lighting control Remote monitoring of switching Use of reflectors. Kosten Optimierung GmbH is also active in Switzerland, Sweden, Slovakia, Hungary, Each town and city is different. This is Our products at a glance: requirements from the very beginning. why our staff addresses your special Light-management systems Lighting conversion systems Advanced sources of light Reflectors All inquiring parties receive: Free basic analysis All products can be individually provided: Know-how for implementation Free sample equipment Technical lighting consulting Financing concepts. Conversion module: E.K.O. Quantic 70/100 W And many others together with an analyses of exist- E.K.O. U-tube adapters ing facilities, to include contracting (i.e., financing), and development of the optimal concept. The objective in all cases is reduction of energy consump- tion and maintenance costs while achieving enhanced lighting characteristics. Change from white to amber light equipment Numerous certificates of excellence confirm the exceptional quality of our services. Fully electronic amplitude controller: E.K.O.tronic.ExxA 3

3 Street and road lighting M O R E F L E X I B I L I T Y O N S T R EE T S A N D P E D E S T R I A N A R E A S Energy costs Time 2 18:00 Nominal value Reduced 19:00 20:00 21:00 22:00 23:00 24:00 Heavy traffic 02:00 03:00 04:00 05:00 06:00 Cost savings Light traffic 4 Floodlight illumination (1). Uniform lighting (2). Dangerous lighting results from switching off every second luminaire, which produces bright and dark zones. (3). Considerable energy savings result from reduction of brightness levels during periods of light traffic (4). Schematic of installation (5). Contracting (6). Development of power prices (7). Light management by E.K.O.mini.ExxA (8). 01:00 Energy costs (in per year) Time point of environmental relief Time point of cost relief Energy-cost savings Contracting rate Energy costs without contracting Energy costs with contracting Transformer station Actual energy costs Switching equipment E.K.O Term of contract Investment time point through the contractor 5-10 Turnover to the customer Term (in years) Great savings potentials short amortization period Modern lighting technology has tremen- tions, new developments in lighting According to German standards for street Application and installation. Painless financing. Proven quality. provides us with time flexibility, greater tighter budgets: these all demand crea- stipulated as uniform longitudinal illu- These savings are possible through the Since the equipment actually pays for This series of systems has been tested and luminaire (3) would theoretically observe equipment in the power feeds leading requested, the modern financing form Agencies (TÜV) and conforms to the dously enhanced our quality of life. It mobility, and improvements in safety. Lighting facilities support all urban traf- fic routes. Each year, however, towns and cities spend considerable amounts for power and maintenance costs. Power- saving measures, changes in expecta- technology, rising power prices (7), and tive and user-oriented solutions. And don t forget: reduced power consumption is the best environmental protection. these stipulations, but would create high risks by producing dark zones. Adapted to traffic density The series of systems developed and Urban traffic density is lowest during the Optimierung GmbH provides your guar- and 5:30 a.m. E.K.O. Light Management antee for consciously controlled power consumption and for optimal cost reduc- tions, with maximum safety. Uniform, 4 mination. Switching off every second Save costs. Maintain safety. patented by E.K.O. Energie Kosten 7 and road lighting, these conditions are consistent reduction of brightness can achieve optimal lighting conditions (2). night-time period between 10:00 p.m. enables during this time window a reduction in several stages of the brightness of installation of E.K.O. Light Management to lighting systems (5). Thanks to simple, yet highly versatile setting possibilities, the system can be installed in all light- ing facilities. Retrofitting of an E.K.O. system is easy (8), since no modification work is required. In addition to feasible energy savings of 15 to 40%, the simple installation explains the short amortization period: from 3 to 7 years. itself, E.K.O. offers towns and cities, if known as contracting. In this solution, E.K.O. makes all the agreed investments, and obtains in return, and within a contractually agreed period, the energy savings gained. Thanks to this form of approved by German Technical Inspection European Union directives for low-volt- age: 72/23/EWG, modified by 93/68/EWG. The equipment requires no maintenance and has a service life of over 25 years. financing, towns and other communities can carry out all measures without risk and without budgetary resources (6). a street lighting system up to 50%. The average power savings for the course of time depicted in the figure is 22.5% (4). 8 5

4 H I G H - T E C H F O R A L L R E Q U I R E M E N T S E.K.O.mini.ExxA (version for wet rooms) E.K.O.mini.ExxA (standard version) This system type has a modular design: this means that the control module and the transformer module can be installed separately from each other. For wet-room applications, the transformer module is provided in sealed form and can, for example, be lowered into cable shafts. SPACE REQUIREMENTS FOR E.K.O.mini.ExxA.FR Transformer module Device rating (kva) Max. load Imax.(A) Depth 1 Depth 2 SPACE REQUIREMENTS FOR E.K.O.mini.ExxA Width 2 Depth 3 Height 2 Device rating (kva) Max. load Imax.(A) Mass (kg) Transformer w/ control section kva / 6A kva / 10A kva / 10A kva / 16A kva / 16A kva / 25A kva / 25A kva / 32A kva / 32A cable 1.5 m IP10 for control module and IP 64 for transformer module (HM, for example HQL, HPL, HSL, etc.) to HM 50 W HS 50 W HM 80 W HS 70 W HM 125 W HS 100 W The existing ballast system can E.K.O. QUANTIC is integrated into the Automatic safety switch-off of the existing HM ballast system. It can then be used to operated a long-life highpressure sodium-vapor lamp. Description QUANTIC 70/100 conversion unit with integrated digital starter for the replacement of mercury-vapour high-pressure lamps (HM) by sodi- um-vapour (HS) high-pressure lamps. 6 = HM 400 W HS 400 W high-pressure sodium-vapor lamps (HS, for example TwinArc, NAV, SON, etc.). The + HM 250 W HS 250 W remain in the luminaire. lamp in case of malfunction, and at the HM luminaire: High-pressure mercury-vapour lamp E.K.O.QUANTIC HS luminaire: High-pressure sodium-vapour lamp Dimensions in mm end of its service life: which eliminates any excessive temperatures in the luminaire. Reliable lamp start and shortened hot restart time: e.g., after short sags in mains voltage: as a result of use of QUANTIC with its principle of interval starting. M from high-pressure mercury-vapor lamps Height 3 in order to assure slow and safe reduction and is therefore moisture-proof: IP 64 classification 62 Compact conversion unit for conversion Reduction level 1 and 2 are time-delayed, For the wet-room version, the transformer is sealed, Maximum ambient temperature: +40 C E.K.O.Quantic 70/100 Automatic lamp start if mains power fails Transformer section Reduction level 2: two taps possible Height 2 Class of enclosure protection for E.K.O.mini.ExxA (standard): IP10 Class of enclosure protection for E.K.O.mini.ExxA.FR (wet rooms): Depth V (terminal 9), or 210 V (terminal 8) 200 V (terminal 9), or 190 V (terminal 8) h3 pt h2 De pt De Rated current [A]: 6, 10, 16, 25, 32 Control range of the lamp output: 100% to a max. of 65% Width 3 Reduction level 1: two taps possible Width 2 Height 2 Rated frequency [Hz]: % operation (230 V AC). Rated voltage [V]: 1 x 230 EKO contactor K2 employed lamps: EKO contactor K1 Terminal effective for all conventionally EKO-mini timer relay The E.K.O.mini.EXXA (FR) is Terminal and wet-room models: For E.K.O.mini standard Timer relay and wet-room models: 158 EKO contactor K2 EKO contactor K1 85 For E.K.O.mini standard Mass (kg) 1.3 kva / 6A PERFORMANCE CHARACTERISTICS Depth 1 Depth 2 Height 2 Width 2 Depth 3 Height 3 TECHNICAL DATA Transformer w/out control section Depth 2 Depth 1 +2 Technical data Unit 70 W 100 W Capable of use for HM lamps W 50 / / 250 / 400 Permissible mains voltage V Mains frequency Hz 50 / / 60 Maximum permissible lamp current A Terminals mmc Making / breaking voltage V 198 / / 170 Starting voltage kv Maximum starting duration s 1170 Phase relation of the starting pulse el / Pulses per mains period 6 3 Permissible loading capacity pf Intrinsic losses at 25 C W < 1 (1.0 A) < 1 (1.8 A) ambient temperature Temperature increase at 25 C K < 10 (1.0 A) < 5 (1.8 A) ambient temperature Maximum enclosure temperature tc C Permissible ambient temperature ta C (1.0 A) (1.8 A) Weight (mass) kg Before conversion: HM ballast HM light source After conversion: HM ballast can remain unchanged Use of high-voltage-proof wires is necessary HM ballast E.K.O. Quantic HS light source Testing in accordance with: EN , EN

5 E.K.O. Energie Kosten Optimierung GmbH Dr.-Hans-Lechner-Straße Wals-Siezenheim/Austria Tel Fax office@eko-salzburg.at EN frd 4.08 Europoles GmbH & Co. KG Ingolstaedter Straße Neumarkt/Germany Tel Fax info@europoles.com