Technical data Hydraulic lift crane LR 1200 SX
|
|
- Lindsey Fox
- 7 years ago
- Views:
Transcription
1 Technical data Hydraulic lift crane LR 1200 SX
2 Dimensions Basic machine with undercarriage narrow track width Operating weight The operating weight includes the basic machine with crawlers, 2 main winches 120 kn including wire ropes (260 m and 495 m) and 20 m main boom, consisting of A frame, boom foot (10 m), boom head (7 m), boom extension (3 m), 81 t basic counterweight, 36 t carbody counterweight and 250 t hook block. Total weight Ground pressure approx. 210 t Ground bearing pressure 1.16 kg/cm 2 Equipment Main boom (No xx) max. length 86 m High reach boom (No xx and 1916.xx) 117 m Luffing jib (No xx) max. length 95 m Max. combination main boom 53 m and luffing jib 95 m Fixed jib (No xx) 11 m 26 m Auxiliary jib 36 t capacity Remarks 1. The lifting capacities stated are valid for lifting operation only (corresponding with crane classification according to F.E.M , crane group A1). 2. Crane standing on firm, horizontal ground. 3. The weight of the lifting device (hoisting ropes, hook block, shackle etc.) must be deducted form the gross lifting capacity to obtain a net lifting value. 4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must be deducted to get the net lifting capacity. 5. For max. wind speed please refer to lift chart in operator s cab or manual. 6. Working radii are measured from center of swing and under load. 7. The lifting capacities are valid for 360 degrees of swing. 8. Calculation of stability under load is based on DIN / part 2 / chart 1 and ISO 4305 Table 1 + 2, tipping angle The structures are calculated according to F.E.M (EN ; EN ). 2 LR 1200 SX
3 Transport dimensions and weights Basic machine and boom (No xx) Basic machine with A frame, 2x 120 kn crane winches including wire ropes (total hoist ropes 755 m), without crawlers, boom foot, basic counterweight and carbody counterweight 3000 mm Weight kg Crawler Track pads Weight 2x 1200 mm 1200 mm kg Boom foot (No ) Weight incl. winch and rope Weight without winch 2430 mm 5600 kg 4000 kg Boom section (No ) 3 m 2430 mm 925 kg Boom section (No ) 6 m 2430 mm 1455 kg Boom section (No ) 12 m 2430 mm 2690 kg Boom head (No ) 2430 mm 4300 kg Transport option Boom - luffing jib transport option No xx/1916.xx 12/12 6/6 3/3 m Length mm kg *) Including pendants LR 1200 SX 3
4 Transport dimensions and weights Luffing jib (No xx) Luffing jib head (No ) mm 1550 kg L - boom jib section (No ) 1 m 2010 mm 460 kg 1850 Luffing jib section () 3 m mm 475 kg 1850 Luffing jib section () 6 m Luffing jib section () 2010 mm 690 kg 12 m 2010 mm 1250 kg 3150 Luffing jib foot with A-frames (No ) mm 6300 kg L - boom section tapered (No. 2320/ ) 12 m 2430 mm 1700 kg *) Including pendants Fixed jib (No xx) Fixed jib head (No ) mm 920 kg 6500 Fixed jib section (No ) 6 m mm 455 kg Fixed jib section (No ) 3 m 1090 mm 300 kg 6620 *) Including pendants 1850 Fixed jib foot with A-frame (No ) 2200 mm 1950 kg 4 LR 1200 SX
5 Transport dimensions and weights Counterweights Counterweight Weight Counterweight Weight Counterweight Weight Counterweight Weight Carbody counterweight Weight 1x 1660 mm kg 1x 1660 mm kg 10x 1360 mm 5100 kg 2x 3340 mm 9800 kg 2x 2050 mm 8300 kg Mid fall (option) 2060 Mid fall section (No ) Weight 0.5 m 750 mm 715 kg Hooks t hook block 11 sheaves mm Weight kg 160 t hook block 7 sheaves mm Weight kg 100 t hook block 5 sheaves mm Weight kg 40 t hook block 1 sheave mm Weight kg 12.5 t single hook 400 mm Weight 600 kg LR 1200 SX 5
6 Technical description Engine Power rating according to ISO 9249, 270 kw (362 hp) at 2000 rpm Engine type Liebherr D 936 L A6 Fuel tank 800 l capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certification EPA / CARB Tier 3 and 97/68 EC Stage III. Hydraulic system A double axial displacement pump supplies the open loop hydraulic system, allowing all functions to be operated simultaneously. To minimize peak pressure an automatic working pressure cut off is integrated in the pump. All filters are electronically monitored. The use of synthetic environmentally friendly (biodegradable) oils is possible. Working pressure max. 350 bar Oil tank capacity 650 l Main winches Line pull (1st layer) max. 175 kn Line pull (7th layer) 120 kn Rope diameter 26 mm Drum diameter 580 mm Rope speed m/min Rope capacity in 7 layers 489 m The winches are outstanding in their compact design and easy assembly. Propulsion is via a planetary gearbox in an oil bath. Load support by the hydraulic system; additional safety factor provided by a spring loaded, multi disc holding brake. The main winches use pressure controlled, variable flow hydraulic motors. This system features sensors that automatically adjust oil flow to provide max. winch speed depending on load. Option winch with freefall system: Clutch and braking functions on the freefall system are provided by a compact designed, low wear and maintenance-free multi disc brake. Crawlers Propulsion through axial piston motor, hydraulically released spring loaded multi disc brake, crawler tracks, hydraulic chain tensioning device. Track pads 1200 mm Drive speed km/h Luffing jib winch Line pull max. 105 kn Rope diameter 20 mm Jib luffing 51 sec. from 15 to 78 Boom winch Line pull max. 217 kn Rope diameter 24 mm Boom up 130 sec. from 15 to 86 Control The control system developed and manufactured by Liebherr is designed to withstand extreme environmental conditions such as temperature, vibration and electromagnetic interference and to meet all requirements that are needed in heavy duty crane operation. Complete machine operating data are shown on a high resolution display. Standard operational information is displayed by means of graphical symbols, fault indications are displayed in plain text (more than 15 languages available). The cranes are equipped with proportional control for all main movements, which can be carried out simultaneously. The crane is operated with 2 multi directional joysticks, the right for winch I and boom, the left for winch II and swing control. Option: Bi directional double T levers for simultaneous boom and luffing jib operation. The crawlers are activated by the two foot pedals. Additionally, hand levers can be attached to the pedals. Remote control for assembly of counterweight and boom hinge pins. Swing Consists of rollerbearing with external teeth, swing drive with fixed axial piston hydraulic motor, spring loaded and hydraulically released multi disc holding brake, planetary gearbox and pinion. Both swing modes are possible speed control or free swing. A multi disc holding brake acts automatically at zero swing motion. Swing speed from 0 3 rpm continuously variable. Noise emission Noise emissions correspond with 2000/14/EC directive on noise emission by equipment used outdoors. 6 LR 1200 SX
7 Boom combinations 7.0 m (23 ft) No m (40 ft) 12.0 m (40 ft) 7.0 m (23 ft) No m (39.4 inch) No m (40 ft) 12.0 m (40 ft) 12.0 m (40 ft) 7 m (23 ft) No No No m (40 ft) 12.0 m (40 ft) 12.0 m (40 ft) 6.0 m (20 ft) 5.5 m (18 ft) No m (20 ft) No m (20 ft) No m (10 ft) No m (18 ft) No m (23 ft) No No Mid fall 0.5 m (1.64 ft) No m (40 ft) 12.0 m (40 ft) 6.0 m (20 ft) 3.0 m (10 ft) 7.0 m (23 ft) No No Tapered 12.0 m (40 ft) No. 2320/ No m (23 ft) No No No No No No No No No m (20 ft) No m (10 ft) No m (20 ft) No m (10 ft) No m (20 ft) No No m (33 ft) No m (33 ft) No m (33 ft) No m (33 ft) No Main boom No.2320.xx 86 m Max. combination 117 m Main boom No.2320.xx 43 m Tapered No.2320/1916.xx 12 m Luffing jib No.1916.xx 62 m Max. combination 97 m Main boom No xx 71 m Fixed jib No xx 26 m Max. combination 148 m Main boom No xx 53 m Luffing jib No xx 95 m Main boom No xx 59 m Luffing jib No xx 50 m LR 1200 SX 7
8 Self assembly system Unloading of basic machine Unloading and assembly of crawlers Unloading and assembly of carbody counterweight Unloading and assembly of counterweight Unloading and assembly of boom foot 8 LR 1200 SX Unloading and assembly of boom
9 Erecting of main boom to working position Assembly of boom Reeving of hoist and luffing jib ropes Erecting of main boom and luffing jib Working position LR 1200 SX 9
10 Main boom (No xx) t counterweight and 36 t carbody counterweight Auxiliary jib 36 t 86 m 83 m 80 m 77 m 74 m 71 m 68 m 65 m 62 m 59 m 56 m 53 m 50 m 47 m 44 m 41 m 38 m 35 m 32 m 29 m 26 m 23 m 20 m 2000 The maximum capacity of the auxiliary jib is 36 t. The corresponding load chart is programmed in the LMI system. Main boom configuration (Table 1 No xx) Configuration for boom lengths between 20 m and 86 m Length Amount of boom extensions Boom foot 10 m Boom section 3 m Boom section 6 m Boom section 12 m Boom head 7 m Boom length (m) LR 1200 SX
11 Lift chart for main boom (No xx) 81 t counterweight and 36 t carbody counterweight Capacities in metric tons for boom lengths (20 m - 86 m) - with 120 kn winches Boom length in (m) Radius Radius t t t t (m) Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator s cab or manual. Lift chart for main boom (No xx) 70.8 t counterweight and 36 t carbody counterweight Capacities in metric tons for boom lengths (20 m - 83 m) - with 120 kn winches Boom length in (m) Radius Radius t t t t (m) 4.1 * Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator s cab or manual. * Capacities over 220 t require a special heavy duty boom head. LR 1200 SX 11
12 L - boom high reach (No. 2320/1916.xx) 66 m 117 m Working range L boom configuration with 43 m main boom (No. 2320/1916.xx) Configuration for L boom lengths (66 m 117 m) Length Amount of boom extensions Boom foot 10 m Boom section 3 m Boom section 6 m Boom section 12 m Tapered 12 m Luffing section 3 m Luffing section 6 m Luffing section 12 m Luffing section 1 m Luffing jib head 7 m Max. L boom length (m) LR 1200 SX
13 Lift chart for L boom (No. 2320/1916.xx) Main boom length 43 m Capacities in metric tons 81 t counterweight and 36 t carbody counterweight Boom length in (m) Radius t t Main boom length 55 m Capacities in metric tons 81 t counterweight and 36 t carbody counterweight Boom length in (m) Radius t t Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator s cab or manual. L boom configuration with 55 m main boom (No. 2320/1916.xx) Configuration for L boom lengths (66 m 114 m) Length Amount of boom extensions Boom foot 10 m Boom section 3 m Boom section 6 m Boom section 12 m Tapered 12 m Luffing section 3 m Luffing section 6 m Luffing section 12 m Luffing section 1 m Luffing jib head 7 m Max. L boom length (m) LR 1200 SX 13
14 Working range luffing jib (No xx) Main boom m 92 m 89 m 86 m 83 m 80 m 77 m 74 m 71 m 68 m 65 m 62 m 59 m 56 m 53 m 50 m 47 m 44 m 41 m 38 m 35 m 32 m 29 m 26 m 23 m 20 m 59 m 56 m 53 m 50 m 47 m 44 m 41 m 38 m 35 m 32 m 29 m 26 m 23 m Boom configuration for main boom lengths (23 m 59 m) see table 1 on page 10 Jib configuration for jib lengths (20 m 95 m) Length Luffing jib foot 7 m Luffing jib section 3 m Luffing jib section 6 m Luffing jib section 12 m Luffing jib head 7 m Luffing jib length (m) LR 1200 SX
15 Lift chart luffing jib (No xx) Main boom angle 88 Main boom 23 m Main boom 44 m Main boom 56 m Radius Main boom 35 m Main boom 53 m Main boom 59 m Radius t Capacities in metric tons with luffing jib (No xx), 81 t counterweight + 36 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1200 SX 15
16 Lift chart luffing jib (No xx) Main boom angle 83 Main boom 23 m Main boom 44 m Main boom 56 m Radius Main boom 35 m Main boom 53 m Main boom 59 m Radius t Capacities in metric tons with luffing jib (No xx), 81 t counterweight + 36 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 16 LR 1200 SX
17 Lift chart luffing jib (No xx) Main boom angle 75 Main boom 23 m Main boom 44 m Main boom 56 m Radius Main boom 35 m Main boom 53 m Main boom 59 m Radius t Capacities in metric tons with luffing jib (No xx), 81 t counterweight + 36 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1200 SX 17
18 Lift chart luffing jib (No xx) Main boom angle 65 Main boom 23 m Main boom 35 m Main boom 44 m Radius t t t Main boom 53 m Radius t t Main boom 56 m Radius Main boom 59 m Radius t Capacities in metric tons with luffing jib (No xx), 81 t counterweight + 36 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 18 LR 1200 SX
19 Lift chart luffing jib (No xx) Main boom angle 45 Main boom 23 m Radius t t t Main boom 35 m Radius t Main boom 44 m Radius Main boom 53 m Radius (m) t t Main boom 56 m Radius (m) t t Main boom 59 m Radius 20 (m) t Capacities in metric tons with luffing jib (No xx), 81 t counterweight + 36 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1200 SX 19
20 Working range - fixed jib (No xx) 15 and 30 Main boom Boom configuration for boom lengths (20 m 74 m) see table 1 on page 10 Fixed jib configuration for fixed jib lengths (11 m 26 m) Length Amount of fixed jib extensions Fixed jib foot 5.5 m Fixed jib section 3.0 m Fixed jib section 6.0 m Fixed jib head 5.5 m Fixed jib length (m) LR 1200 SX
21 Lift chart - fixed jib (No xx) Offset 15 Main boom 20 m Main boom 29 m Main boom 38 m Main boom 47 m Main boom 56 m Main boom 62 m Main boom 68 m Main boom 71 m Main boom 74 m Radius (m) t t t Capacities in metric tons with fixed jib (No xx), 81 t counterweight + 36 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 1200 SX 21
22 Lift chart - fixed jib (No xx) Offset 30 Main boom 20 m Main boom 29 m Main boom 38 m Main boom 47 m Main boom 56 m Main boom 62 m Main boom 68 m Main boom 71 m Main boom 74 m Radius (m) t t t Capacities in metric tons with fixed jib (No xx), 81 t counterweight + 36 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 22 LR 1200 SX
23 Notice LR 1200 SX 23
24 Liebherr-Werk Nenzing GmbH P.O. Box 10, A-6710 Nenzing/Austria Tel.: Fax: LR 1200 SX /2010 Subject to change without notice.
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationRT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : BME800G Max. Lifting Capacity : 80 t x 3.6 m Max. Crane Length : 54.9 m BME800G CONTENTS 3 5 6 7 8 9 10 11 12 13 14 17 SPECIFICATIONS Power Plant Model: HINO P11C-VC Type:
More informationRT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane
More informationBoom and fly capacities for this machine are listed by the following sections:
Lifting Capacities Telescopic Hydraulic Truck Crane HTC 8650 50 ton (45.36 metric ton) and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
More informationSkid Steer Loader CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm
More informationSKID STEER LOADER CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : 7250S Max. Lifting Capacity: 250 t x 4.6 m Max. Lifting Capacity With ower Jib: 25.0 t x 18.0 m Max. Crane oom Length: 76.2 m Max. Long oom Length: 91.4 m Max. Fixed Jib
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKE800G Max. Lifting Capacities : 80 t x 3.0 m Max. Crane Boom Length : 54.9 m Max. Fixed Jib Combination: 42.7 m + 18.3 m 45.7 m + 12.2 m CKE800G CONENS 3 SPECIFICAIONS
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationHYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE Crawler Crane Max. Lifting Capacity: 250t at 4.6m Luffing Tower Max. Lifting Capacity: 25t at 18.0m Technology and Power, KOBELCO Takes Pride In Hydraulic Crawler Crane 7250 Now
More informationFTheBetterMachine. Technical Description R 992. Hydraulic Excavator
Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket
More informationALL TERRAIN HYDRAULIC CRANE
ALL TERRAIN HYDRAULIC CRANE Dimensions 26' 7" (8 100) R 37' 2" (11 325) Ra 34' (10 350) R 35' 4" (10 775) Ra 32' 5" (9 875) 18' 3" (5 570) 8' 4" (2 530) R 26' 11" (8 200) Ra 24' (7 325) 42' 0" (12 795)
More informationMobile crane LTM 1130-5.1. Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m
Mobile crane LTM 1130-5.1 Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m Mobile Crane LTM 1130-5.1 Flexible and economical to operate 2 LTM 1130-5.1 The Liebherr LTM 1130-5.1
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationPC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKE800G Max. Lifting Capacity : 80 t x 3.0 m Max. Crane oom Length : 54.9 m Max. Fixed Jib Combination: 42.7 m + 18.3 m 45.7 m + 12.2 m CKE800G CONENS 3 SPECIFICAIONS 5
More informationProduct advantages Mobile crane 1090/2
Product advantages Mobile crane 1090/2 Max. lifting capacity: 90 t at 3 m radius Max. height under hook: 72 m with biparted swing-away jib Max. radius: 56 m with biparted swing-away jib Performance profile
More informationJCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length
More informationRH 12.5 RH 16.5. Crawler Excavator Specifications
Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic
More informationHYDRAULIC CRAWLER CRANE
HYDRAULI RAWLER RANE Max. Lifting apacity: 80 ton x.7 m Max. rane oom Length: 8. m Max. Long oom Length: 8. m Max. Fixed Jib ombination: 7. m +. m Max. Luffing Jib ombination:.9 m +.8 m ONFIGURAION rane
More informationHEAVY DUTY BASE MACHINE FOR FOUNDATION WORK
HEAVY DUY ASE MACHINE FOR FOUNDAION WORK Max. Lifting Capacity: 80 t x 3.7 m Max. Crane oom : 54.9 m CONFIGURAION Crane oom Max. Lifting Capacity: 80 metric ton x 3.7 m Max. oom : 54.9 m Clamshell Max.
More informationVOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910
More information303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
More informationHYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 550 ton STANDARD Max. Boom Length: 108 m Max. Luffing Jib Combination: 60 + 72 m HEAVY LIFT Max. Boom Length: 108 m Max. Luffing Jib Combination: 66 + 72
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : CKS600 Max. Lifting Capacity: 60 t x 3.0 m * Max. Crane Boom Length: 51.8 m Max. Fixed Jib Combination: 39.6 m + 18.3 m 42.7 m + 12.2 m * c/w = 11.0 t CKS600 CONENS 3 5
More informationnet flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationTechnical Description LR 611 Crawler Loader
Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924
More information303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)
More informationPC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³
PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product
More informationR 994 B. Technical Description Hydraulic Excavator
Technical Description ydraulic Excavator R 994 B litronic` Operating weight with backhoe attachment 296,00 t/652,570 lb Operating weight with shovel attachment 300,50 t/662,490 lb Engine output 1500 P
More informationHydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
More information304C CR Mini Hydraulic Excavator
304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight
More informationLiebherr Top Technology. Cranes for Wind Power
Liebherr Top Technology Cranes for Wind Power 5 concepts for the wind power Liebherr offers optimized crane concepts for the most diverse situations and requirements for the erection of wind s for highest
More information308E CR SB. Mini Hydraulic Excavator with Swing Boom
308E CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model Cat C3.3B Operating Weight with Cab 8333 kg 18,371 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications Maximum
More informationWOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear
1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch
More informationTabela de Carga: Grove RT 522B - Comercial
Tabela de Carga: Grove RT 522B - Comercial Desenvolvedor autorizado Dimensions 11' 1-3/8" (3387) TAILSWING 18' 6" (5639) EXT 13' (3962) MID EXT 7' 6-3/4" () RET 8' 5 1/2" (78) 8' 2" (2489) ' 3-3/8" (9229)
More informationEC210 VOLVO EXCAVATOR LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM
VOLVO EXCAVATOR EC210 LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM Engine power, gross: 119 kw (160 hp) Operating weight: _ LC : 20.5 ~ 21.9 t _ NLC : 20.4 ~ 21.2 t Buckets (SAE): 950 ~ 1250
More information303.5C CR Mini Hydraulic Excavator
303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab
More informationEXPORT w w w. k r a n m a n. c o m
EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load
More informationSPEC. SHEET TR-500EX. Left hand steeri ng. 4-section, 10.7 m - 34.1 m DIMENSIONS. approx. approx. approx. 43,100 kg - front axle. approx.
SPEC. SHEET TR-500EX Left hand steeri ng No. TR-500E-2-01202/EX-50 GENERAL DATA CRANE BOOM CAPACTY 50,000 kg at 3.5 m 4-section, 10.7 m - 34.1 m DMENSONS Overall length Overall width 13,570 mm 3,315 mm
More informationHOW HYDRAULIC TRUCK CRANES WORK
HOW HYDRAULIC TRUCK CRANES WORK Heavy rains spawned by Hurricane Danny flooded many parts of Charlotte, NC. Flood waters rose so quickly in Little Sugar Creek that the underpinnings of a train trestle
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationPotain Igo 42. Product Guide. Features. 4000 kg (8818 lb) maximum capacity. 1100 kg (2425 lb) capacity at 36 m (118 ft)
Potain Igo 42 Product Guide Features 4000 kg (8818 lb) maximum capacity 1100 kg (2425 lb) capacity at 36 m (118 ft) 36 m (118 ft) maximum operating hook radius 33 m (108 ft) maximum hook height with 36
More informationHYDRAULIC EXCAVATOR. ZAXIS-2 series
ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable
More informationSTOUCO Drilling Equipment
STOUCO Drilling Equipment Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift
More informationWinch and Hoist Solutions
Winch and Hoist Solutions LIFTSTAR and PULLSTAR Air Series World s first lube free air winches LIFTSTAR and PULLSTAR Air Series General description The LIFTSTAR / PULLSTAR series from Ingersoll Rand are
More informationTT-300XL. 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC TRUCK CRANE DIMENSIONS
TT-300XL 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC TRUCK CRANE DIMENSIONS GENERAL DIMENSIONS Feet Meters TRAVELING Turning radius Max. traveling speed 80.8mph (130km/h) Front tire (curb to curb) 33.7'
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More information307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights
307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800
More information304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
More informationZAXIS series HYDRAULIC EXCAVATOR
ZAXIS series HYDRAULIC EXCAVATOR Model Code: ZX30 / ZX35 / ZX40 / ZX50 Engine Rated Power: 19.9 kw (26.7 HP) / 19.9 kw (26.7 HP) / 26.5 kw (35.5HP) / 26.5 kw (35.5HP) Operating Weight: 2 880-3 030 kg /
More informationMobile (Truck) Cranes
Mobile (Truck) Cranes Definition: A truck or mobile crane consists of an upper carriage with front end attachment such as a box or lattice type boom and optional jib (boom extension). The upper carriage
More information160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)
160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all
More informationRT530E. product guide. contents. features 30 ton (30 mt) capacity. Rough Terrain Hydraulic Crane. Features 2. Specifications 3.
product guide contents Features 2 features ton ( mt) capacity 29-95 ft. (8.8-29 m) 4-section full power boom 26- ft. (7.9-13.7 m) telescopic swingaway extension Max main boom tip height of 2.5 ft. (31.2
More informationTR-500XL-3. 50 Ton Capacity (45.4 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS. MIN. 34' 9-1/4" (10.6m) MAX. 110' 6-3/4" (33.
TR-500XL-3 50 Ton Capacity (45.4 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS MIN. 34' 9-1/4" (10.6m) MAX. 110' 6-3/4" (33.7m) 6' (1.83m) 12' 4 (3.76m) 12' 2" (3.71m) 11' 6-1/4" (3.51m) 12' 1-1/4"
More informationSKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
More informationPVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationIC-200-H. Tech Spec. Industrial Crane. 15-Ton Max. Capacity Under 8 Feet Wide. Manufacturing Corp. Rated Capacity Limiter...
Tech Spec IC-200-H Industrial Crane 15-Ton Max. Capacity Under 8 Feet Wide Rated Capacity Limiter... Standard Capacity on Outriggers... 30,000 lbs Pick and Carry Capacity... up to 17,000 lbs Height...
More informationVOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationTÜV Middle East W.L.L. Welcome
TÜV Middle East W.L.L. Welcome TÜV NORD Group Key Data Foundation of TÜV Nord e.v.: 1869 Foundation of TÜV NORD Group: 2004 Number of employees: 8,000 + A Competent and International Service Partner Competence
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
More information18' 3" (5563) 17.5 X 25 20.5 X 25 6' 6" (1981) 10' 5" (3175) 8' (2438) 10' 6" (3200) (70' BOOM) NA 11' 6" (3505)
Dimensions 15' 11" (4851) I A C 14' 6" (4420) 18' 3" (5563) A B C D E F G TIRE SIZE (TRACK) (O.A.H) (O.A.W) (60' BOOM) (70' BOOM) GROUND CLEARANCE (60' BOOM) H (70' BOOM) I (TAILSWING) (60' BOOM) (70'
More informationSCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationMinimum Breaking Force of Wire Rope (for Winches) 6 x 19 Classification / Bright (Uncoated), IWRC
Minimum Breaking Force of Wire Rope (for Winches) 6 x 19 Classification / Bright (Uncoated), IWRC Wire rope Selection Rope Size (in) Approximate Weight (lb / ft) Minimum Breaking Force Extra Improved Plow
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationJCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
More informationWorldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
More informationMANTSINEN. HybriLift. More load, less energy.
7 HybriLift More load, less energy. 7 HybriLift Lift your efficiency to the next level with hydraulic speed and precision. Aliağa, Turkey HybriLift Increases Energy Efficiency by up to 5% Nakhodka, Russia
More informationMakina ve Teknik Mlz. San. Ve Tic. Ltd. Sti.
SECTION AND PIPE BENDING MACHINES MODEL UPB 10 - - Two Rolls powered - Special cast frame - Shafts are hardened with special steel material - Roll are special steel material - hardened and ground - and
More informationPR 732 B. Technical Description Crawler Tractor
Technical Description Crawler Tractor PR 732 litronic` Engine output 127 kw/173 P Operating weight 17.6 23,9 t/38,800 52,700 lb ydrostatic travel drive with electronic steering control The etter Machine.
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationSUPER 600. Tracked Paver SUPER 600. Pave Widths 0.5m 2.7m. Maximum Laydown Rate 200 tonnes/h. Clearance Width 1.2m
SUPER 600 Tracked Paver SUPER 600 Pave Widths 0.5m 2.7m Maximum Laydown Rate 200 tonnes/h Clearance Width 1.2m Mini Paver for Maximum Efficiency on Minor Job Sites T hanks to its compact size, variable
More informationVOLVO COMPACT EXCAVATORS ECR58 plus, ECR88 PLUS
VOLVO COMPACT EXCAVATORS ECR58 plus, ECR88 PLUS The comfortable way to get into tight spaces. When your job takes you to an area where space is at a premium, turn to the Volvo ECR58 Plus and ECR88 Plus.
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
More informationApprenticeship Curriculum Standard
Apprenticeship Curriculum Standard Mobile Crane Operator 1 and 2 and Tower Crane Operator Level 1 Common Core Trade Codes: 339A, 339B, 339C Date: 2006 Please Note: Apprenticeship Training and Curriculum
More informationThe mechanics finish work on time today...
The mechanics finish work on time today......and the next crane mounting too. Crane component kits by SWF Krantechnik Your mechanics are satisfied. Your customer is satisfied. You are satisfied. And that
More informationZF W320 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
More informationCat Electronic Technician 2015C v1.0 Product Status Report 2/20/2016 4:34 PM
Cat Electronic Technician 2015C v1.0 Product Status Report 2/20/2016 4:34 PM Product Status Report Parameter Product ID Equipment ID Comments Value JGB00714 NOT PROGRAMMED Machine Control 345D (JGB00714)
More informationCat Electronic Technician 2015A v1.0 Product Status Report 6/3/2015 4:41 PM
Cat Electronic Technician 2015A v1.0 Product Status Report 6/3/2015 4:41 PM Product Status Report Parameter Product ID Equipment ID Comments Value DHK00407 Machine Control 320D/323D (DHK00407) Parameter
More informationADD CURRENT FEATURES AND TECHNOLOGIES TO YOUR CRANE
INDUSTRIAL CRANES NUCLEAR CRANES PORT CRANES HEAVY-DUTY LIFT TRUCKS SERVICE MACHINE TOOL SERVICE RETROFITS ADD CURRENT FEATURES AND TECHNOLOGIES TO YOUR CRANE 2 Konecranes Retrofits RETROFITS MADE EASY
More informationKubota Tractor B50 Cab
Tractor B50 Cab Engine B2650HSDC 2520R 25 B3350HSDC 3320 3040 Engine gross power HP 26 24.2 27 33 32.8 40 36.2 PTO power HP 19.5 18.0 19.9 27 25 32 29.0 No. of cylinders 3 3 3 4 3 4 3 Mahindra 3616 Engine
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationRT600E. product guide. contents
product guide contents Features 2 features 33-5 ft. (-32 m) 4-section full power boom 29-51 ft. (8.8-15.5 m) telescopic swingaway extension Max main boom tip height of 112 ft. (34 m) E Series cab Max overall
More informationCat Electronic Technician 2015A v1.0 Product Status Report 4/20/2016 2:49 PM
Page 1 of 19 Cat Electronic Technician 2015A v1.0 Product Status Report 2:49 PM Product Status Report Parameter Value Product ID WRK00337 Equipment ID WRK00337 Comments A01-52 C9 330D (THX37891) Parameter
More information2.22 - Lifting Appliances
Standards d for Certification 2.22 - Lifting Appliances Ole-Henrik Andressen and Åge Mikkelsen 29th of April 2009 Rules for Certification of Lifting Appliances 1994 Standard dadfor Certification Cet cato
More informationCold milling machine W 1000 F. Technical specification
Cold milling machine W 1000 F Technical specification Technical specification 2 Cold milling machine W 1000 F on four wheels Cold milling machine W 1000 F on four crawler tracks Milling width max. mm 1,000
More informationEngineered Material Handling. Overhead Bridge Cranes and Gantry Cranes
TM Engineered Material Handling Overhead Bridge Overhead and Gantry Bridge Cranes and Gantry Cranes Custom Engineered Crane Systems Gantry Cranes EMH builds a complete range of gantry cranes including
More informationCNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining
CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque
More informationIngersoll-Rand LIFTSTAR. Manriding Winches. Classification and compliance with safety requirements
Classification and compliance with safety requirements Meet the toughest personnel lifting requirements in the offshore industry The LIFTSTAR RLP Manriding winches are designed to the toughest type approval
More informationHydraulic Mining Excavator RH 40-E
Hydraulic Mining Excavator RH -E C engine, mm '", mm '", mm '", mm '", mm '", mm '", mm '",9 mm, mm 9'9", '", mm '" 9 mm '" B, mm '" QSK 9 engine, mm '", mm '", mm '", mm '", mm '", mm '", mm '",9 mm,
More information