LUMELEX 2030 SERIES 120V LED MOUNTING OPTIONS. These LED Cylinder units offer high functionality in LSI s smallest, sleekest package.

Transcription

1 LUMELEX 00 SERIES 10V LED These LED Cylinder units offer high functionality in LSI s smallest, sleekest package. LED designs up to 1 Watts in four formats: Xicato XTM (1mm), Xicato XTM (mm), COB and Dim to Warm architecture General Features Tested to LM and LM0 Protocols, TM-0 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Accessory holder accepts up to two size-aaa LSI filters and accessories Finishes: LSI Black, White, and Silver Fixture weight: lbs All modules are field replaceable Xicato XTM Module (1mm and mm) Extremely tight color consistency (less than MacAdam Ellipses) System efficiency up to lumens/watt 0,000 hour life to 0% lumen output, L0 at F max ambient Field interchangeable optics ( ) modify the beam spread distribution Color Rendering Index (CRI) of either (high) or (standard) Choice of lumen outputs (delivered lumens) COB Architecture optic produces 000 CBCP with 0 lumens at watts (1 and also available) System efficiency up to lumens/watt 0,000 hour life to 0% lumen output, L0 at F max ambient Color Rendering Index (CRI) 0+ Color consistency, MacAdam ellipses Dim to Warm Module System efficiency up to lumens/watt,000 hour life to 0% lumen output, L0 at F max ambient Halogen mimicking color from 000K to 000K Field interchangeable optics (1,, or 0 ) modify the beam spread distribution Color Rendering Index (CRI) of min. at all dimming settings Lumen output: 00 Lumens Proprietary mixing optics for smooth even light MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: LED Module Color Temperature Optic - mm/beam spread Dimming Voltage Finish LX00-XXXXX-XXXXXX-E-XXXXXX Canopy for permanent mounting on standard octagonal junction boxes. (-1/ deep) 1/1 LX00-XXXXX-XXXXXX-0E-XXXXXX Lexan Fitting for 1 and circuit LSI Track. With On/Off switch. /1 Other Options (Consult Factory): Custom stems, specify length ( ) Custom color, RAL palette Security/Worklite Fixture, use EF as mounting option. (track mount only) 0/1

2 ORDERING INFORMATION /1 mm Xicato XTM 1mm Fixture 1. Choose the desired LED Module (T1) for XTM (1mm). Choose the letter code to designate the desired Lumens/CRI/Wattage (0-) for 00//1 (1-) for 100//1. Choose the numeric code to designate the desired Color Temperature () for 00K (0) for 000K For other CCT, consult factory 1/1 1mm. Use the following alpha-numeric code to designate the Optic (S1) for 0mm/1 (S) for mm/0. Select your Mounting Option (0E) Track Fitting (E) Canopy Fitting. Choose the letter code for Dimming Type (TE) Trailing Edge (ELV Reverse Phase) (%). Choose the desired Voltage: (10) for 10V /1 mm. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX00 -T1 1- S1-0E - TE 10 B FIXTURE LED MODULE LED RATING CCT OPTIC FITTING DRIVER VOLTAGE FINISH. Don t forget your Accessories! Color Temperature & Center Point Tolerance Color Temp Center Point Tolerance 00K 00K +/- 0K 000K 0K +/- 0K 00K 0K +/- 0K 000K 000K +/- 0K Chromaticity Specifications R g - Gamut LED R a - CRI R f - Fidelity Area T1-TS - 1 T1-TS - ACCESSORIES LX01FR Wall Wash Cylinder Housing which includes slash front, accessory cartridge, spread gel ( x ) and kicker reflector Other accessories: LX-S1-REF-B (0mm/1 ) LX-S0-REF-CLR (mm/0 ) Glass Color Filters AAA Louver Hex AAA Spread Lenses AAA0, AAA, AAA, AAA Beam Softener AAA Light Blocking Screens AAA01S, AAA0S, AAA0S Color and Spread Gels AAA Backer Ring AAAB Solid State 0/1

3 LUMELEX 00 SERIES XICATO XTM 1MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a range of numbers that immediately follow the product series number. For example, in the part number LX00-T11-S1-0E-TE10B, the T1- represents an LED module with an output of 100 lumens, a CRI of, a power usage of 1 watts and a color temperature of 00K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the S1 in LX00-T11- S1-0E-TE10B is a 0mm diameter optic that has a 1-Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Delivered Lumens Efficiency = Lumens Per Watt Absolute range of values are +/- % of typical value, and are for all color temperatures Lumens/CRI/Wattage S1 S 00// //1 0 Lumens/CRI/Wattage S1 S 00// //1 0 Lumens/CRI/Wattage S1 S 00// //1 Lumens/CRI/Wattage 00//1 100//1 SKU Code 0-1- Nominal Fixture Power (+/- 0%), Watts 1 1 Maximum Inrush Current Amps Minimum Power Factor Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. 0/1

4 LUMELEX 00 SERIES XICATO XTM 1MM OPTICS 1/ (mm) LX-S1-REF-B (S1) (0mm/1 ) Anti-reflective coated aspheric lens. Tool-less, twist and lock installation. Black Finish. 1/1 (mm) 1 1/ (mm) 1 1/1 (mm) LX-S0-REF-CLR (S) (mm/0 ) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Clear Finish. Solid State 0/1

5 LUMELEX 00 SERIES XICATO XTM 1MM PHOTOMETRIC DATA LED RATING: 1- S1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower CRI S-mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 1 CRI All Max. Footcandles at 0 Beam Axis S (0 ) S1 (1 ) All Distances in Feet Photometric Data based on : 1- (100 Lumens/CRI/1watts) 0/1

6 ORDERING INFORMATION /1 mm Xicato XTM mm Fixture 1. Choose the desired LED Module (TS) for XTM (mm). Choose the letter code to designate the desired Lumens/CRI/Wattage (0-) for 00//1 (0-) for 00//1. Choose the numeric code to designate the desired Color Temperature () for 00K (0) for 000K For other CCT, consult factory 1/1 1mm. Use the following alpha-numeric code to designate the Optic (P1) for 0mm/1 (P) for 0mm/ (P) for 0mm/0. Select your Mounting Option (0E) Track Fitting (E) Canopy Fitting. Choose the letter code for Dimming Type (TE) Trailing Edge (ELV Reverse Phase) (%). Choose the desired Voltage: (10) for 10V /1 mm. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX00 - TS 0- P1-0E -TE 10 B FIXTURE LED MODULE LED RATING CCT OPTIC FITTING DRIVER VOLTAGE FINISH. Don t forget your Accessories! Color Temperature & Center Point Tolerance Color Temp Center Point Tolerance 00K 00K +/- 0K 000K 0K +/- 0K 00K 0K +/- 0K 000K 000K +/- 0K Chromaticity Specifications R g - Gamut LED R a - CRI R f - Fidelity Area T1-TS - 1 T1-TS - ACCESSORIES LX01FR Wall Wash Cylinder Housing which includes slash front, accessory cartridge, spread gel ( x ) and kicker reflector Other accessories: LX-P1-REF-CLR (0mm/1 ) LX-P-REF-CLR (0mm/ ) LX-P0-REF-CLR (0mm/0 ) Glass Color Filters AAA Louver Hex AAA Spread Lenses AAA0, AAA, AAA, AAA Beam Softener AAA Light Blocking Screens AAA01S, AAA0S, AAA0S Color and Spread Gels AAA Backer Ring AAAB Solid State 0/1

7 LUMELEX 00 SERIES XICATO XTM MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a range of numbers that immediately follow the product series number. For example, in the part number LX00-TS0-P1-0E-TE10B, the TS0- represents an LED module with an output of 00 lumens, a CRI of, a power usage of 1 watts and a color temperature of 00K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the P1 in LX00-TS0- P1-0E-TE10B is a 0mm diameter optic that has a 1-Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Delivered Lumens Efficiency = Lumens Per Watt Absolute range of values are +/- % of typical value, and are for all color temperatures Lumens/CRI/Wattage P1 P P 00// //1 1 Lumens/CRI/Wattage P1 P P 00//1 00//1 0 1 Lumens/CRI/Wattage P1 P P 00//1 00//1 Lumens/CRI/Wattage 00//1 00//1 SKU Code 0-0- Nominal Fixture Power (+/- 0%), Watts 1 1 Maximum Inrush Current Amps Minimum Power Factor Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. 0/1

8 LUMELEX 00 SERIES XICATO XTM MM OPTICS 1 /1 (0mm) LX-P1-REF-CLR (P1) (0mm/1 ) Faceted specular metal optic. Tool-less twist and lock installation. Clear finish. 1 1/1 (mm) 1 /1 (0mm) LX-P-REF-CLR (P) (0mm/ ) Faceted specular metal optic. Tool-less twist and lock installation. Clear finish. 1 1/1 (mm) 1 /1 (0mm) LX-P0-REF-CLR (P) (0mm/0 ) Faceted specular metal optic. Tool-less twist and lock installation. Clear finish. 1 1/1 (mm) Solid State 0/1

9 LUMELEX 00 SERIES XICATO XTM MM PHOTOMETRIC DATA LED RATING: 0- P1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower CRI P-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower CRI P-0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 1 CRI All Max. Footcandles at 0 Beam Axis P (0 ) P ( ) P1 (1 ) All Distances in Feet Photometric Data based on : 0- (00 Lumens/CRI/1watts) 0/1

10 ORDERING INFORMATION COB Fixture /1 mm 1. Choose the desired LED Module (ZE1) for single LED. Choose the letter code to designate the desired Lumens/CRI/Wattage (0-0) for 0/0/. Choose the numeric code to designate the desired Color Temperature () for 00K (0) for 000K For other CCT, consult factory 1/1 1mm. Use the following numeric code to designate the Optic (0) for mm/ (1) for mm/1 () for mm/. Select your Mounting Option (0E) Track Fitting (E) Canopy Fitting. Choose the letter code for Dimming Type (TE) Trailing Edge (ELV Reverse Phase) (%) /1 mm. Choose the desired Voltage: (10) for 10V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX00 - ZE E -TE 10 B FIXTURE LED MODULE LED RATING CCT OPTIC FITTING DRIVER VOLTAGE FINISH. Don t forget your Accessories! Driver Type (Electronic) ACCESSORIES Input Power (A) - 10V 0.0 Input Power (A) - V 0.0 Wattage Power Factor - V 0. Chromaticity Specifications R g - Gamut LED R a - CRI R f - Fidelity Area ZE1 0 Glass Color Filters AAA Louver Hex AAA Spread Lenses AAA0, AAA, AAA, AAA Beam Softener AAA Light Blocking Screens AAA01S, AAA0S, AAA0S Color and Spread Gels AAA Backer Ring AAAB Solid State 0/1

11 LUMELEX 00 SERIES COB PERFORMANCE The performance characteristics of the LX00 family of products can be customized based on the LED module and the optic selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), its available lumens and beam spread. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX00-ZE-000-0E-TE10B, the ZE-000 represents an LED module with an output of 0 lumens, a CRI of 0, a power usage of watts, color temperature of 000K and a -Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power LED Module *Preliminary data LED Module Lumens/CRI/Wattage SKU Code Nominal Fixture Power (+/- 0%), Watts Maximum Inrush Current Amps Lumens/CRI/Wattage 0 1 * * 0/0/ Delivered Lumens LED Module Lumens/CRI/Wattage 0 1 * * 0/0/ Efficiency = Lumens Per Watt LED Module Lumens/CRI/Wattage 0 1 * * 0/0/ 0 ZE1 Minimum Power Factor 0. Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. 0/1

12 LUMELEX 00 SERIES COB PHOTOMETRIC DATA PHOTOMETRIC DATA LX00 Beam Spread (minimum) Center Beam Candlepower 01 CRI 0+ LX00 (preliminary) Beam Spread (minimum) 1 Center Beam Candlepower 0 CRI 0+ LX00 (preliminary) Beam Spread (minimum) Center Beam Candlepower 00 CRI 0+ o o o All Distances in Feet 0 LX Solid State 0/1

13 ORDERING INFORMATION /1 mm Dim to Warm Fixture 1. Choose the desired LED Module (D0) for Dim to Warm. Choose the letter code to designate the desired Lumens/CRI/Wattage (-) for 00//1. Choose the numeric code to designate the desired Color Temperature (DW) for 000K to 000K 1mm. Use the following alpha-numeric code to designate the Optic (P1) for 0mm/1 (P) for 0mm/ (P) for 0mm/0. Select your Mounting Option (0E) Track Fitting (E) Canopy Fitting. Choose the letter code for Dimming Type (TE) Trailing Edge (ELV Reverse Phase) (%). Choose the desired Voltage: (10) for 10V / mm. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX00 - D0 - DW P1-0E -TE 10 B FIXTURE LED MODULE LED RATING CCT OPTIC FITTING DRIVER VOLTAGE FINISH. Don t forget your Accessories! Chromaticity Specifications R g - Gamut LED R a - CRI R f - Fidelity Area D0 ACCESSORIES LX01FR Wall Wash Cylinder Housing which includes slash front, accessory cartridge, spread gel ( x ) and kicker reflector Other accessories: LX-P1-REF-CLR (0mm/1 ) LX-P-REF-CLR (0mm/ ) LX-P0-REF-CLR (0mm/0 ) Glass Color Filters AAA Louver Hex AAA Spread Lenses AAA0, AAA, AAA, AAA Beam Softener AAA Light Blocking Screens AAA01S, AAA0S, AAA0S Color and Spread Gels AAA Backer Ring AAAB 0/1

14 LUMELEX 00 SERIES DIM TO WARM PERFORMANCE The performance characteristics of the Dim to Warm LumeLEX family of products can be customized based on the optic (reflector) selected. The behavior of the Dim to Warm modules links the color of the light to the dimmed output of the fixture just like a halogen or incandescent source. Therefore the four characteristics defining the color - the color rendering index (CRI), the correlated color temperature (CCT) range, the power that it uses (watts), and its available lumens are all linked to the dim setting. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. Also note that the CRI of this fixture is a minimum of at any dimming setting. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX00-D0-DWP1-0E-TE10B, the D0-DW represents a Dim to Warm LED module with an output of 00 lumens, a CRI of, a power usage of 1 watts and a color temperature range of 000K 000K that is tied to the dimming setting. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the P1 in LX00-D0- DWP1-0E-TE10B is a 0mm diameter optic that has a 1-Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination CBCP = Center Beam Candle Power Absolute range of values are +/- % of typical value, and are for all color temperatures Lumens/CRI/Wattage 00//1 SKU Code - Nominal Fixture Power (+/- 0%), Watts 1 Maximum Inrush Current Amps Minimum Power Factor 0. Lumens/CRI/Wattage W W W 00//1 00 Delivered Lumens Lumens/CRI/Wattage W W W 00// Efficiency = Lumens Per Watt Lumens/CRI/Wattage W W W 00//1 Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. Solid State 0/1

15 LUMELEX 00 SERIES DIM TO WARM MM OPTICS 1 /1 (0mm) LX-P1-REF-CLR (P1) (0mm/1 ) Faceted specular metal optic. Tool-less twist and lock installation. Clear finish. 1 1/1 (mm) 1 /1 (0mm) LX-P-REF-CLR (P) (0mm/ ) Faceted specular metal optic. Tool-less twist and lock installation. Clear finish. 1 1/1 (mm) 1 /1 (0mm) LX-P0-REF-CLR (P) (0mm/0 ) Faceted specular metal optic. Tool-less twist and lock installation. Clear finish. 1 1/1 (mm) 0/1

16 LUMELEX 00 SERIES DIM TO WARM PHOTOMETRIC DATA LED RATING: - P1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower CRI P-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 00 CRI P-0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI All Max. Footcandles at 0 Beam Axis P (0 ) P ( ) P1 (1 ) All Distances in Feet Photometric Data based on : - (00 Lumens/CRI/1watts) Solid State 0/1

17 LUMELEX 00 ACCESSORIES SPREAD LENSES AND BEAM SOFTENER % of Light No. Description Transmission AAA0 Spread Lens/Clear ( X 0 ) AAA Spread Lens/Clear ( X 0 ) AAA Spread Lens/Clear (0 X 0 ) AAA Spread Lens/Clear ( X 0 ) AAA Beam Softener/Clear 0 ( X ) 1 LIGHT BLOCKING SCREENS AAA Stainless steel mesh screens used alone or in combinations will block from approximately 0% to 0% of the transmitted light without changing color temperature of the light. No. % of Light Blocked AAA01S 0 AAA0S 0 AAA0S 0 LOUVER HEX AAA 1/ thick Hexcell black metal louver used for thin profile. BACKER RING AAA Stainless steel ring to hold thin film gels when no other size AAA accessories are being used. LX01FR Wall Wash Cylinder Housing which includes slash front, accessory cartridge, spread gel ( x ) and kicker reflector 1. Figures vary based upon LED module/optic being used and relationship of screen(s) to LED module/optic and to each other. 0/1

18 LUMELEX 00 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS (FOR LumeLEX 00 ONLY) Size: AAA Spread Gel GEL-L1-AAA GEL-L-AAA GEL-L-AAA GEL-L0-AAA GEL-L0-AAA GEL-L0-AAA GEL-L0-AAA GEL-L0-AAA GEL-L0B-AAA GEL-L0B-AAA GEL-L0B1-AAA GEL-L0B-AAA GEL-LB-AAA GEL-L0B0-AAA GEL-R1-AAA 1 Spread Gel Spread Gel Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 by Spread Gel 0 by 0. Spread Gel 0 by 1 Spread Gel 0 by Spread Gel by Spread Gel 0 by 0 Spread Gel Beam Softener LumeLEX COLOR GELS (FOR LumeLEX 00 ONLY) Size: AAA Gel Color Size: AAA Gel Color GEL-R-AAA GEL-R-AAA GEL-R1-AAA GEL-R1-AAA GEL-R1-AAA GEL-R1-AAA GEL-R-AAA GEL-R-AAA GEL-R-AAA GEL-R-AAA GEL-R-AAA GEL-R1-AAA GEL-R-AAA GEL-R1-AAA GEL-R-AAA GEL-R-AAA GEL-R1-AAA GEL-R-AAA GEL-R-AAA GEL-R11-AAA GEL-R0-AAA Bastard Amber Pale Yellow Straw Straw Tint Medium Straw Golden Amber Orange Red Light Red Medium Red Lavender Booster Blue Sea Blue Azure Blue Primary Green Light Grey Medium Grey Light Frost Tough Silk Lt. Hamburg Frost Blue Diffusion Rose Gold GEL-R1-AAA Canary GEL-R0-AAA Half Blue GEL-R1-AAA Shell Pink GEL-R-AAA Sapphire Blue GEL-R-AAA Pale Grey GEL-R001-AAA Storaro Red GEL-R00-AAA Storaro Green GEL-R00-AAA Storaro Violet GEL-R0-AAA Full Blue GEL-R0-AAA Third Blue GEL-R1-AAA Eighth Blue (Boosts 00K to 00K) GEL-R1-AAA Tough 1/ Minusgreen GEL-R-AAA Roscosun (1/ CTO) (Reduces 00K to 00K) GEL-R1-AAA Full Straw (CTS) GEL-R-AAA Quarter Straw (CTS) GEL-R0-AAA CalColor 0 Cyan GEL-R1-AAA CalColor 1 Green GEL-R0-AAA CalColor 0 Green GEL-R0-AAA CalColor 0 Pink GEL-R0-AAA CalColor 0 Pink GEL-R0-AAA CalColor 0 Lavender Solid State 0/1

19 COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA / LumeLEX 00/00/01/0, SSLGR1, LumeLEX MAR AA LumeLEX 0 (with LX0-Holder or LX0-Barndoor), LumeLEX 0, LumeLEX 0, LumeLEX 0 A 1/ LumeLEX 00, SSL0, SSLGR0CL, SSLGR C / SSL, SSLGRCL, LumeLEX 0 Special Glass Color Filters LSI will fabricate, on special order, glass color filters in most sizes and shapes. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. Multicolor Filters Unique LSI four color glass filters create rich exciting blended color effects on all objects with brilliant four color fringed shadows on background. No. Glass Colors Used 0 /0//1 1 /0/1/ /1//0 /0//1 1///0 Duocolor Filters LSI two color glass filters blend to form one unique color that previously could only be achieved by using two separate color filters in the same fixture. Two color fringed shadows produced on background. No. Glass Colors Used 0 / 1 /1 /0 / 1/0 0/ / Notes: 1. Values given are approximate due to slight variations in glass color and thickness. 1 % of Light No. Color Transmission 0 Medium Pink 0 Deep Pink 0 Flesh Pink 0 Pale Lavender 1 0 Surprise Pink 1 0 Lilac 1 Warm Red Strawberry 1 Ruby 1 Magenta 1 1 Light Amethyst 1 Medium Amethyst 1 1 Deep Amethyst 1 Olive 1 1 Light Green 0 Medium Green 1 Deep Green Silver green Yellow Green Emerald Green 1 Light Turquoise Medium Turquoise 0 Deep Turquoise 1 Light Blue 0 Medium Blue Daylight Gene Moore Blue 1 Grey Light Blue Green 1 Light Amber 0 Medium Amber 1 Deep Amber Straw Gold Canary Yellow Lemon 1 Pumpkin Tangerine 0 Orange Pink Gold 0 Bronze 1 Brass Autumn Tan Leaf Brown 1 Butter Pecan Toasted Almond 1 /1

20 COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA / LumeLEX 00/00/01/0, SSLGR1, LumeLEX MAR AA LumeLEX 0 (with LX0-Holder or LX0-Barndoor), LumeLEX 0, LumeLEX 0, LumeLEX 0 A 1/ LumeLEX 00, SSL0, SSLGR0CL, SSLGR C / SSL, SSLGRCL, LumeLEX 0 Special Glass Color Filters LSI will fabricate, on special order, dichroic glass color filters in most sizes and shapes not exceeding a 1 diameter circle overall. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 0 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 001 Light Pink 00 Medium Pink 00 Hot Pink 00 Pale Pink 0 Deep Magenta 0 Lavender 01 Vivid Magenta 1 01 Lavender Accent 01 Lilac 01 Purple Fusion 1 00 Sky Blue 01 Sea Blue 0 Cyan 0 Light Blue Green 0 0 Primary Blue 0 Medium Red Blue 1 0 Deep Purple 1 0 Peacock Blue 0 Mediterranean Blue 0 0 Boost Blue 1 00 Light Yellow Green 01 Fern Green 0 Turquoise 0 Primary Green 1 0 Industrial Green 00 Yellow 0 01 Amber 1 0 Amber Blush 0 Bastard Amber 1 0 Goldenrod 0 Bright Straw 00 Medium Orange 1 01 Orange 00 Flame Red 01 Primary Red Solid State /1