SUR Tech Rider. Stage Gear: Pearl Vision Series or higher models, Tama Star Classic or Mapex.

Transcription

1 SUR Tech Rider Stage Gear: 1) DRUM KIT: Standard Rock Drum Kit : a. Toms b. Kick - 22 c. Snare 14x5 d. Cymbals- Zildjian A or K Series ONLY. e. 1 Hi- hats with stand. f. 1 Drum Throne. g. 4 cymbal boom stands. The acceptable Models for the drum kit in order of preference are : Pearl Vision Series or higher models, Tama Star Classic or Mapex. The top and bottom scales must be Evans hydraulic or similar two ply must be completely undamaged. A riser for drums specifications L*B*H 8ft*8ft*1.5ft must be there. (OUTDOOR ONLY) 2) GUITAR AMP: Fender Twin Reverb or Marshall JCM 800 Series. (only) 3) KEYBOARD AMP: Roland KC 550 or Hartke KM * sturdy keyboard stand. 4) BASS GUITAR AMP: Ampeg SVT 4 Pro with SVT 810E Cabinet or Hartke LH 1000 with 410 cabinet. 1) OTHER REQUIREMENTS: a) 4* Music/Lyrics notation stand. b) Power points (Indian Style) 4-6 at different places on the stage.

2 Monitor Requirements: a. 12 wedges monitors on 7 aux sends for each of the band members. b. 2 side fills with subwoofers on two separate mixes placed on either side of the stage are required. (JBL SRX 725 Tops with JBL SRX 728 Subwoofers OR equivalent ) c. 1 pair of side fills without Subwoofers on a separate mix. d. 3 sets of In Ear Monitors must ( Shure PSM 900/700/600 or Sennheiser ew 300) e. (with Shure SE215 or Higher Series earphones) f. The drum monitor MUST have a SUBWOOFER.( Please use a separate crossover) g. Ramp Monitors are must incase a ramp is present. h. Note: Please make sure all wedges are of the same make and model and all the wedges should be Way ACTIVE/ PASSIVE. No mixing and matching please. i. Preferred brands are NEXO PS15 R2 Series, EAW MW15 Series, EAW LA215 Series, Martin Audio LE 1500S, Martin Audio LE 2100S, D.A.S. Avant 15A Series, JBL VRX915M Series, ONLY. FOH Console: A Digital Console with the following features is to be provided. Please do not substitute with an Analog Console. 1. Minimum 4 internal FX Processors VCA groups+8 Audio groups Aux Buses band graphic equalizer for all outputs The following are suitable in order of preference: a. Digidesign D Show/ Profile/ SC 48 b. Yamaha QL5, Yamaha CL 5, Yamaha PM5D. If the above are not available please inform us well in advance as to what equipment is available. Please refrain from providing smaller digital console like the Yamaha LS9. These are not accepted.

3 2. PA System: 1 The PA should be at least a 3-way Line Array System. a. The PA should be setup by the vendor depending on the venue, location and acoustics. b. The PA should be capable of about 115 db SPL at FOH with headroom for a bit more. c. The PA Subs (Subwoofer) should be routed on a separate Aux. d. Acceptable brands of PA are Martin Audio, Meyer Sound, L Acoustics, Nexo, D&B,EAW, D.A.S. Aero Series and JBL Vertec Series. e. In case the above brands are not available, please consult the band engineer about the same. f. The system should be setup, tuned & aligned (with removing all the feedbacks from FOH as well as the monitors) and ready by the time the band reaches the venue. 2 CENTRE FILL: Same As FOH Speakers (Adequate Centre fills With Subs for The dance floor is COMPULSORRY) (Applicable in Outdoor Venue & Indoor Venue) Note: Centre Fill has to be routed through a Matrix Out. SOUND GEAR: 1) Mic/Input Requirements: Microphones/ Lines 1. Lead Vocals: 2* Shure UHF- R with Beta 58 or SM58 Head OR Shure ULX-D with Beta 58 or SM58 Head OR Sennheiser SKM 2000 Series with 935 Head or 945 Head.(only) 2. Backing Vocals: 3* Shure SM58.

4 3. Drums: Drum Mic Kit can be any of the following- 1. Audix DP7 Series. 2. Sennheiser e900 Series. 3. Shure clip on mics. 4. AKG clip on mics. a) Kick Drum 1* Shure Beta 91 AND 1* Shure Beta 52 or Audix D6 c) Snare: 2* Shure Beta 57 or shure SM57 or Audixi5. d) Toms: 4* Sennheiser e904 or Shure beta 98 or AKG C518 or Audix D2. e) Cymbals/Hihats: 3* Sennheiser e914 or Shure SM 81 or AKG C451 B 4. Bass Guitar: 1*DI (BSS or Klark Teknik or Radial J48). 5. Guitar: 2*DI (BSS or Klark Teknik or Radial J48). 1* Shure SM Keyboard: 4* DI (BSS or Klark Teknik or Radial J48). 7. Flute: 1* Shure SM58 on boom stand. 8. Acoustic Guitars: 2* DI (BSS or Klark Teknik or Radial J48).

5 3. Console I/O: a. Channel assignment. Artist Channel Instrument Processing MIc/DI Stands Aux no. 01 Kick in Comp/Gate Shure Beta Kick out Comp/Gate Audix D6 or Shure Beta52, 03 Snare Top Comp/Gate Shure Beta 57 or Medium Shure SM57,Audix i5 04 Snare Bottom Comp/Gate Shure Beta 57 or Medium Shure SM57 05 Hi Hats Sennheiser e914 Medium or Shure SM 81/ AKG C451B 06 Tom 1 Comp/Gate Sennheiser, Shure, AKG or Audix Clipon mic 07 Tom 2 Comp/Gate Sennheiser, Shure, AKG or Audix Clipon mic 08 Floor Tom 1 Comp/Gate Sennheiser, Shure, AKG or Audix Clipon mic 09 Overhead Left Sennheiser e914/ Big Boom Shure SM 81/AKG C451B, AudixADX Overhead Right Sennheiser e914/ Big Boom Shure SM 81/AKG C451B, AudixADX Bass Guitar DI 12 Lead Guitar L DI 13 Lead Guitar R DI 14 Lead Guitar R Shure SM 57 Med Boom 15 Lead Vox Comp Shure or Sennheiser Wireless. (As Mentioned) Big Boom

6 16 Lead Vox Comp Shure or Sennheiser Wireless. (As Mentioned) Big Boom Artist Channel Instrument Processing MIc/DI Stands Aux no. 17 Keys 1 Left DI 18 Keys 1 Right DI 19 Keys 2 Left DI 20 Keys 2 Right DI 30 B Vox Guitar Comp/Gate Shure SM 58 Big 31 B Vox Keys Comp/Gate Shure SM 58 Big 32 B Vox Drummer Comp/Gate Shure SM 58 Big 33 B Vox Perc Comp/Gate Shure SM 58 Big 34 B Vox Flute Comp/Gate Shure SM 58 Big 35 Talk Back Shure SM58

7 a. Auxilliaries: Aux Send Processing Remarks Return No of Wedges 01 Graphic EQ Lead Vox Front Graphic EQ Bass Graphic EQ Lead Guitar Graphic EQ Keyboard Graphic EQ Flute Graphic EQ Drummer 02 Tops+ 01 Sub 08 Graphic EQ Sidefill Left As Mentioned 09 Graphic EQ Sidefill Right As Mentioned 10 Graphic EQ Sidefill Front and Ramp Monitors 11 Graphic EQ Lead Vox IEM Male 12 Graphic EQ Lead Vox IEM Female As Mentioned As Mentioned As Mentioned Graphic EQ PA Subs 15 Graphic EQ Hall Reverb FX 3 16 Graphic EQ Mono Delay FX 4

8 NOTE: The Stage size should be at least L*D*H 30ft*18ft*3ft.(for indoor venues) The Stage size should be at least L*D*H 36ft*24ft*6ft.(for outdoor venues) (Please call Sound Engineer if the Stage size is less than the above mentioned specification.) The Drumkit shud always be placed at centre back of the total stage size, in no case it will be placed off centre. (Left or Right) Corner of the Stage. If there is a LED Screen behind the drummer, please inform us. The Band will take minimum of 2.5 hrs for Sound Check, after the system is fully functional n patched (as per mentioned in the Tech Rider) by the sound vendor.. The Mixing Console should be placed at centre of the Venue (ideally) if not it should be on one side of the venue. ** In no case it will be ACCEPTED next to the PERFORMANCE STAGE. Please Carry Mic/ Line Snake Accordingly. A Riser / Platform of 8ft*8ft*2ft (L*B*H) should be there for the Mixing Console. The Stage Area and Mixer Console Area should be properly covered against Sun, Rain etc The Band will not share the equipment, stage gear etc.. allotted to them with any other band.. The Monitors, Stage Gear should not be moved/changed from their position after the SOUND CHECK is done..

9 Lighting Truss---40ft wide goal post---- Follow Spot x1 Smoke Machine x2 Beams (Moving Heads) x8 Par cans x8 LED Pars x32 Notes: SOUND ENGINEER: A well experienced Sound Engineer should be present to mix the band. If this cannot be arranged then SUR can arrange an engineer at an additional cost. This should be conveyed to us in advance.