Catalog 900. Product Catalog. Pressure and Temperature Measurement. Mechanical Pressure Diaphragm Seals Mechanical Temperature Accessories

Transcription

1 Catalog 900 Product Catalog Pressure and Temperature Measurement Mechanical Pressure Diaphragm Seals Mechanical Temperature Accessories R

2 Product Catalog 900 Pressure and Temperature Measurement Product Catalog 900 Mechanical Pressure Diaphragm Seals Mechanical Temperature Accessories Printed in the United States of America is a registered trademark of Underwriter's Laboratories. is a registered trademark of Underwriter's Laboratories. XSEL TM is a registered trademark of WIKA Instrument Corporation. Halocarbon is a registered trademark of the Halocarbon Products Corporation. Hastelloy is a registered trademark of the Cabot family of companies. Fluorolube is a registered trademark of the Hooker Chemical & Plastics Corporation. Monel and Inconel are registered trademarks of the INCO family of companies. Viton & Teflon are registered trademarks of the E.I. DuPont family of companies.

3 Product Catalog > Table of Contents Table of Contents Selecting a Pressure Gauge 2 Chemical Compatibility Table 3 Advantages of Liquid-filled Gauges 4 WIKA Type Numbers 5 Ordering Guidelines for Pressure Gauges 6 MECHANICAL PRESSURE Commercial Gauges ½", 2", 2½", 4" SP - Fire Sprinkler 4" ½", 2", 2½" ½, 2, 2½, PM 1½", 2" CT 4½" ½", 2½" ½ 15 Industrial & Process Gauges ½", 2" 16 13X.53 4" " " ½", 4" 20 21X.40PM 3½" 21 21X.53 2", 2½", 4" 22 23X.53 2", 2½", 4" 26 21X.54 4" 28 23X.54 2½, 4" ½" 32 23X.30 2½", 4" 33 23X.50 2½", 4", 4½", 6" 34 21X.34 4½" 35 22X.34 4½" 36 23X.34 4½", 6" 37 26X.34 4½" DD 4½" ½", 6" ½", 6" 42 4XX.12 4", 6" 43 43X.50 4", 6" 44 Low Pressure Gauges A2G A2G ½" " 48 6X2.34 4½" " 50 Differential & Duplex Gauges ½", 4½" ½", 4½" " DP 4½", 6" DX 4½", 6" ½", 6" ½", 6" 57 High Precision Gauges " " " ½" DD 4½ / ½ Calibration Equipment CPH CPG WICP-L100, WICP-M500, WICP-H10K 67 DIAPHRAGM SEALS Diaphragm Seal Applications 69 Operating Principle 70 Selection Guidelines 71 Assembled Seals M93X M93X.3A 74 M932.2C 76 M93X.D1 78 Threaded Seals 990.TA TB TC Flanged Seals FA FC FD FB FR Sanitary Seals Plastic Seals InLine Seals Seal Accessories ZA 117 General Seal Information 119 For complete detailed information, including electronic pressure, electronic temperature and ultra high purity products, please visit MECHANICAL TEMPERATURE Bimetal Thermometers Operating Principle 126 General Specifications 127 TI TI.ST 128 TI TI.T20/TI.T TI.30/TI TI.31/TI TI.32/TI TI.33/TI.34/TI.53/TI Ordering Bimetal Thermometers 135 Bimetal Thermometer Options 137 Digital Thermometers TI.80/TI Twin-Temp Thermometers TT.30/TT.32/TT.50/TT TT.80/TT Gas Actuated Thermometers TI.R45/TI.R TI.TSG Vapor Actuated Thermometers TI.V20/TI.V25/TI.V35/TI.V Industrial Glass Thermometers TI.61102/TI TI.62102/TI TI.D TI.701/TI Thermowells TW.TH / TW15 (Threaded) 159 TW.FL / TW10 (Flanged) 160 TW.SW / TW20 (Socket/Weld) 160 TW.SC / TW30 (Sanitary) 161 Industrial Glass 162 ACCESSORIES Gauge Cocks Needle Valves Mini-Needle Valves Block & Bleed Valves Multi-Port Valves / / Snubbers Overpressure Protectors Test Port Plug Adaptors Couplings Mini-Siphon / Siphons 172 CP3000/CP4000 Alarm Contacts 173 Socket Restrictor 176 Drag Pointer 176 Alarm Contacts 176 Pressure Gauge Accessories 177 Standard Dial Layouts 182 Conversion Chart 184 Cross reference Chart IBC 1

4 2 Product Catalog > Selecting a Pressure Gauge Selecting a Pressure Gauge When selecting a pressure gauge, it is important to consider the following factors to ensure safety and accuracy: 1. Pressure fluid composition 2. Pressure fluid temperature 3. Ambient conditions 4. Pressure range 5. Conditions affecting wear of the system 6. Method of mounting 7. Required accuracy 1. Pressure fluid composition Since the sensing element of a pressure gauge may be exposed directly to the measured medium, consider the characteristics of this medium. It may be corrosive, it may solidify at various temperatures or it may contain solids that will leave deposits inside the sensing element. For pressure fluids that will not solidify under normal conditions or leave deposits, a Bourdon tube gauge is acceptable. Otherwise a Sealgauge or diaphragm seal should be used. A chemical compatibility chart follows this section to aid in the selection of the proper sensing element material. 2. Pressure fluid temperature Steam and other hot media may raise the temperature of the gauge components above safe working limits of the sealed joints. In these cases it is recommended that a siphon, cooling tower or diaphragm seal be used in conjunction with the pressure gauge. 3. Ambient conditions The normal ambient temperature range for WIKA pressure gauges is -40 o F to +140 o F (-40 o C to +60 o C) for dry or silicone-filled gauges and -4 o F to +140 o F (-20 o C to +60 o C) for glycerine-filled gauges. The error caused by temperature changes is +0.3% or -0.3% per 18 o F rise or fall, respectively. The reference temperature is 70 o F (20 o C). The correction is for the temperature of the gauge, not the temperature of the measured medium. Remote gauge mounting using a diaphragm seal and capillary line is one alternative for applications involving extreme ambient temperature. Moisture and weather effects must also be considered. Liquid-filled gauges prevent condensation build up. For outdoor use, stainless steel, brass or plastic cased gauges are recommended. 4. Pressure range A gauge range of twice the working pressure is generally selected. The working pressure in all cases should be limited to 75% of the gauge range. Where alternating pressure and pulsation are encountered, working pressure should be limited to 2/3 of the gauge range. 5. Conditions affecting wear of the system In applications involving severe pressure fluctuation or pulsation, the use of restrictors and/or snubbers is recommended. In addition, liquid-filled gauges increase the service life of gauges in these conditions. WIKA liquidfilled gauges are generally filled with glycerine. Silicone for larger temperature extremes and Halocarbon for use with oxidizing agents such as chlorine, oxygen and hydrogen peroxide are also available. 6. Method of mounting Radial (LM) and back (CBM or LBM) connections are available for most WIKA gauges. WIKA stocks gauges with standard NPT threaded connections. Other types such as metric threads, straight threads, hose barbs and special fittings are available as a special order. Pressure gauges should be mounted in the upright position. For applications where the gauge is mounted side ways, horizontally or upside down, contact WIKA Customer Service for gauge type compatibility. 7. Required accuracy WIKA stocks gauges with accuracies from ± 3/2/3% to ±0.1% of span (ASME Grade B to Grade 4A). To ensure safe and accurate gauge selection, you must take all of the above factors into consideration. When in doubt, please do not hesitate to contact your local stocking distributor or WIKA Customer Care for assistance! WIKA-USA

5 Product Catalog > Chemical Compatibility Chart Chemical Compatibility Chart Acetic Acid B Ethyl Acetate A Oxygen A Acetic Anhydride D Ethyl Cellulose B Paraffin A Acetone B Ethylene A Phosphoric Acid B Acetylene B Ethylene Dibromide B Photographic Solutions B Alcohol A Ethylene Dichloride D Pickling Solutions B Alums B Ethylene Glycol A Picric Acid B Aluminum Sulfate B Ferric Nitrate B Picric Acid (dry) B Ammonia B Ferric Sulfate B Potassium Chloride D Ammonium Carbonate B Formaldehyde B Potassium Cyanide B Ammonium Hydroxide D Freon A Potassium Permanganate B Ammonium Phosphate D Gallic Acid B Prestone A Beer A Gas (for lighting) A Salicylic Acid A Benzine A Gasoline A Sea Water C Benzol A Gasoline (refined) B Silver Nitrate B Benzyl Alcohol B Glucose C Sodium Carbonate D Bleach Liquors B Glycerine A Sodium Cyanide D Bordeaux Mixture A Hydrocyanic Acid B Sodium Hydroxide D Butane B Hydrogen B Sodium Nitrate B Butanol A Hydrogen Peroxide B Sodium Peroxide B Butyric Acid B Kerosene A Sodium Phosphate B Calcium Bisulfite B Lacquers A Sodium Sulfate B Calcium Chloride C Lactic Acid B Sodium Sulfide D Calcium Hydroxide B Lysol B Sodium Sulfite B Carbon Dioxide(dry) B Magnesium Hydroxide C Sulfur Dioxide D Carbon Bisulfide B Magnesium Sulfate B Sulfur Dioxide (dry) B Casein B Mercury B Sulfuric (75%) B Chloroform B Methyl Chloride D Sulfurous Acid B Chromic Acid B Methyl Salicylate D Tanning Liquors D Citric Acid B Naphtha A Toluene A Coal Gas A Nickel Acetate B Vegetable Oils B Copper Sulfate B Nitric Acid (pure) B Vinegar B Cottonseed Oil B Nitrous Acid D Water A Creosote (crude) B Nitrous Oxide D Whiskey B Dextrine A Oil (lubricating) A Wines B Ethers D Oil (refined) A Zinc Sulfate B NOTE: For steam service, a siphon is required. Find the process fluid in the table above and match the letter code (A,B,C, or D) with the wetted part material listed below: A = Brass (Copper Alloy) B = 316 SS C = Monel D = Consult Factory This table is provided as a reference only and is accurate to the best of WIKA's knowledge. WIKA assumes no responsibility for, or obligation from, the information here. 3

6 Product Catalog > Advantages of Liquid-Filled Gauges Advantages of Liquid-filled Gauges Liquid-filled gauges Liquid-filled pressure gauges provide a number of advantages: the liquid absorbs vibration and pressure spikes the dampening action of the liquid enables the operator to take readings during conditions of rapid dynamic loading and vibration the liquid lubricates all moving elements, dramatically reducing wear in the movement because most liquid-filled gauges are filled with non-aqueous liquid and hermetically sealed, they perform in corrosive environments and are immune to moisture penetration and icing, and shock effects are lessened Liquid-filled gauges enhance the reliability and integrity of the measuring system for long periods under extreme operating conditions. Indicates liquid-fillable pressure gauge. Choose the Right Liquid The type of liquid used to fill the gauge varies with the application. Although pure glycerine provides the best performance in most applications, each has its own requirements. Guidelines to help ensure that a fluid is properly matched to an application are: if icing is a problem, use gauges filled with silicone oil or other comparable liquids. They have low viscosities even at -60 o C if the system has electric accessories, such as contacts, use insulating oils, and if extreme temperature fluctuations are expected, use silicone oils The higher the liquid viscosity, the greater its dampening capacity. The reason for this is that dampening changes in proportion to the temperature-dependent viscosity of the filling liquid. The suitable degree of dampening depends on the operating requirements the gauge must meet, such as pointer response time, pressure extremes, vibration and changes in pressure. WIKA can recommend specific liquids to suit problem applications. Liquid Fill Fluid Ambient Temperature Ratings (Table A) Allowable Operating Range - Temperature range in which the operation of the gauge is not adversely affected by the filling liquid. At temperatures above the maximum rating, the fluid may break down. At temperatures below the minimum rating, the fluid may solidify (freeze).! NOTE: Some parts of the pressure gauge may not be able to withstand temperatures above 140 o F. Consult with the factory for technical assistance for these applications. Fill Fluid Allowable Operating Range Glycerine -4 F to 140 F -20 C to 60 C Dow 99.7% USP, Synthetic 1118 Centistokes at 68 F Silicone -40 F to 140 F -40 C to 60 C Dow Corning 200 Fluid 1000 Centistokes at 77 F Halocarbon -40 F to 140 F -40 C to 60 C Halocarbon Products 6.3 Centistokes at 100 F Table A - Allowable Ambient Temperature Ratings Liquid-filled Gauge Case Venting For pressure gauges with full scale ranges of 300 psi and below (including vacuum and compound ranges of 30" Hg psi and below), case venting (after the gauge is installed) is necesary to preserve the accuracy. Temperature fluctuations during shipment and in the process appliction cause the liquid filling to expand and contract which in turn increases or decreases case pressure. As a result, accuracy can be decreased and the pointer may not return to zero properly until the gauge is vented to the atmosphere. To vent a WIKA gauge, move the valve to the open position which will release any pressure or vacuum built up in the case. If the gauge is installed in an upright position, the lever can be left in the open position. The lever allows the use of a gauge in a non-upright orientation. Vent Plug 4

7 Product Catalog > WIKA Type Numbers WIKA Type Numbers The following is a guide to the WIKA model numbering system WETTED PARTS (Parts in contact with the fluid) 0 = Special design 1 = Copper alloy (brass) 2 = Steel 3 = Stainless steel 4 = Nickel - iron alloy (Ni-Span C ) 5 = Plastic (Refers to coating or lining, not actual sensing element) 6 = Nickel - copper alloy (Monel ) BASIC INSTRUMENT TYPE (Instrument Series) 1 = Standard General Purpose Design 2 = High Quality Industrial Design 3 = Test & Precision Test Gauges 4 = Sealgauge Diaphragm Gauges 5 = Absolute Pressure Gauges 6 = Capsule Pressure Gauges (Low pressure) 7 = Differential Pressure and Duplex Gauges 8 = Electronic Pressure Measurement Line 9 = Diaphragm Seals CASE FILLING 0 = Special type 1 = Standard type 2 = Increased water protection (splash resistant) - dry case 3 = With liquid-filled case or ready-to-be filled 4 = Square or rectangular housing DESIGN FEATURES 10 = Standard design - (lower mount connection in "100 series") 11 = Compressed gas gauges or small size stainless steel 12 = Standard design - (center back mount connection in "100 series") 13 = Liquid-filled ABS plastic case 15 = Special stainless steel gauge 20 = Heavy duty case, usually with bayonet ring, separate lens and increased dust and water spray protection 25 = Hinged ring design 30 = Solid-front, blow-out back case (safety case). 34 = Fiberglass reinforced thermoplastic case - "Process Gauge" 40 = Forged brass case. 41 = Special design for mining industry 50 = All stainless construction 52 = Gas density monitor or controller 53 = Stainless case, o-ring or welded connection to socket, crimped ring bezel 54 = Stainless case, o-ring or welded connection to socket, bayonet ring SPECIAL FEATURES Some products may have additional letters in the type code. This typically indicates a special feature or application 5

8 Product Catalog > WIKA Type Numbers Ordering Guidelines for Pressure Gauges 1) Quick Order 7- or 8-Digit Part Numbers: Example: Use the part number for the instrument you wish to order. If you need additional options, or don t see a part number referenced for the exact product you need, you may use Descriptive Text as indicated below (see #2). A 7-or 8-digit part number will be provided with your order confirmation. The part number provided may then be used for re-ordering purposes. 2) Descriptive Text Part Number System: Example: Standard Product Description Section Additional Options & Accessories psi ½ LM SG, PM (Type #) (Dial Size) (Pressure Range) (Process Conn. & Location) (Additional Options / Accessories) The above example would indicate a 4½ process gauge, dry, 100 psi dial scale, ½ NPT connection, lower mount connection with the following selected options: safety glass (SG) and panel mount (PM), as indicated. Descriptive text can be used anytime you do not find an exact item with a listed part number. You may add as many codes at the end of the descriptive text as is required to configure the product. Codes and installed prices are found on a selection chart for each product type. Additional options may be located on the Accessory pages section in the back of the Catalog 900. Please reference the WIKA Type Number (pg. 5) for additional product type information. WIKA product types may already determine many configurations for wetted parts and case fill. Options and accessories should always appear at the end of the descriptive text, separated by commas. If you are not sure what to use for abbreviated code, then simply spell it out. NOTE: If you provide a part number and descriptive text, we will use the part number only. If you are unclear, do not see the option(s) needed, or require ordering assistance, please contact a WIKA Customer Care or Technical Quote Team representative. 6

9 COMMERCIAL GAUGES R Mechanical Pressure > Commercial Gauges > Type WIKA type standard pressure gauges are designed for long and reliable service under rugged conditions. Some typical applications are for pumps, hydraulic and pneumatic systems, compressors, as a contractor s gauge and for many other applications where the measured media does not corrode brass. MECHANICAL PRESSURE Size: 1½", 2", 2½" & 4" Case: Black ABS Wetted Parts: Copper alloy Window: Clear plastic Dial: White ABS; (4") aluminum Pointer: Black ABS; (4") aluminum Accuracy: Connection: ± 3/2/3% of span ASME B Grade B Lower mount Type Size 1½" 2" 2½" 4" Connection LM LM LM LM Conn. Size 1/8" NPT 1/8" NPT 1/4" NPT 1/4" NPT 1/4" NPT Press. Scale PSI PSI PSI PSI/KPA PSI PSI/KPA PSI PSI/KPA 30" Hg "-0-15 psi "-0-30 psi "-0-60 psi " psi " psi " psi psi psi psi psi psi psi psi psi psi psi ,000 psi ,500 psi ,000 psi ,000 psi ,000 psi Accessory order codes (installed at factory) Restrictor + R Stock items shown in blue print. Available Options Glass window Drag pointer Cleaned for oxygen service Black steel case and ring Stainless steel case and ring Special connections Applications Fire sprinkler systems Suitable for all media that will not obstruct the pressure system or attack copper alloy parts Abbreviations LM - Lower mount 7

10 COMMERCIAL GAUGES R Mechanical Pressure > Commercial Gauges > SP MECHANICAL PRESSURE Type SP WIKA type SP 4 gauges are specifically designed for fire sprinkler service. This gauge features a black polycarbonate case, polycarbonate window and brass wetted parts. They are UL and FM approved for fire sprinkler service and have a standard accuracy of ± 3/2/3% of span. Size: 4" Case: Black polycarbonate Wetted Parts: Copper alloy Window: Snap-in polycarbonate Dial: White aluminum Pointer: Black aluminum Accuracy: Connection: ± 3/2/3% of span ASME B Grade B Lower mount Type SP Size 4" Available Options Black steel case Connection LM Conn. Size 1/4" NPT Press. Scale PSI 300 psi "WATER" psi rated to 250 psi "AIR" Accessory order codes (installed at factory) Restrictor + R Stock items shown in blue print. UL-393 Listed Factory Mutual Approved Abbreviations LM - Lower mount 8

11 COMMERCIAL GAUGES R Mechanical Pressure > Commercial Pressure > Type WIKA type gauges are designed for use with compressed gases, such as those used in the welding industry. The low copper content of the Bourdon tube for pressure ranges 800 psi and below makes it safe for use with acetylene. All type gauges are cleaned to ASME B Level IV. USE NO OIL is printed in red on the face of each dial, making them safe for use with oxygen. MECHANICAL PRESSURE Size: 1½, 2 & 2½ Case: Polished brass or gold-painted steel Wetted Parts: Copper alloy Window: Twist-lock polycarbonate Dial: White aluminum Pointer: Black aluminum Accuracy: ± 3/2/3% of span ASME B Grade B Connection: Lower mount Ranges 100 psi and up supplied with restrictor Type Size 1½ 2 2½ 2 2½ Case Gold-painted steel Polished brass Conn. Size 1/8" NPT 1/4" NPT 1/4" NPT Press. Scale PSI PSI PSI PSI PSI 15 psi 30 psi psi Red Band psi psi psi psi psi ,000 psi ,500 psi 2,000 psi ,000 psi ,000 psi ,000 psi N/A Accessory order codes (installed at factory) Restrictor + R Stock items shown in blue print. Available Options Restrictor Cleaned for oxygen service with bag and cap CBM connection (1½ and 2 only) Black steel case Chrome plated steel case Black plastic case (1½ and 2 only) Applications Compressed gas regulators Beverage dispensing machines Suitable for all media that will not obstruct the pressure system or attack copper alloy parts Abbreviations LM - Lower mount CBM - Center back mount 9

12 COMMERCIAL GAUGES R Mechanical Pressure > Commercial Gauges > MECHANICAL PRESSURE Type WIKA type gauges feature a black plastic case, snap-in plastic window and a center back mount (CBM) rear connection. With an industry recognized ASME 3/2/3% of span accuracy, WIKA type gauges are the industry standard in the commercial gauge line. Available in a variety of sizes, mounting styles and optional configurations, type gauges are suitable for many tough applications including regulators, medical, pneumatic controllers, compressors, valve positioners and pumps. Size: 1½", 2", 2½" & 4" Case: Black ABS Wetted Parts: Copper alloy Window: Clear plastic Dial: Pointer: White ABS; (4") aluminum Black ABS; (4") aluminum Accuracy: Connection: ± 3/2/3% of span ASME B Grade B Center back mount Type Size 1½" 2" Connection CBM Conn. Size 1/8" NPT 1/8" NPT 1/4" NPT Press. Scale¹ PSI PSI/KG/CM² PSI PSI PSI/KPA 30" Hg "-0-15 psi 30"-0-30 psi 30"-0-60 psi 30" psi 30" psi 30" psi 30" psi 30" psi 15 psi psi psi psi psi psi psi psi psi psi 1,000 psi ,500 psi 2,000 psi 3,000 psi ,000 psi Accessory order codes (installed at factory Front flange, black steel -- FF B Front flange, chr steel -- FF C Restrictor, brass R Available Options Glass window Drag pointer Cleaned for oxygen service Black steel case and ring Stainless steel case and ring Special connections Applications Hydraulic and pneumatic systems Pumps, compressors, water systems, regulators Suitable for all media that will not obstruct the pressure system or attack copper alloy parts Abbreviations CBM - Center back mount Stock items shown in blue print. 10

13 COMMERCIAL GAUGES R Mechanical Pressure > Commercial Gauges > Type Type Size 2½" 4" Connection CBM CBM Conn. Size 1/4" NPT 1/4" NPT Press. Scale¹ PSI PSI/KPA PSI/KG/CM 2 30" Hg "-0-15 psi "-0-30 psi "-0-60 psi " psi " psi " psi " psi 30" psi 15 psi psi psi psi psi psi psi psi psi psi ,000 psi ,500 psi ,000 psi ,000 psi ,000 psi Accessories (installed) Front flange, black steel FF B Front flange, chrome steel FF C Restrictor, brass R Abbreviations CBM - Center back mount Stock items shown in blue print. MECHANICAL PRESSURE ¹ "PSI/KG/CM²" denotes dual scale; PSI outside in black, KG/CM² inside in red. Vacuum scale: 30"Hg outside in black; 760 mm Hg inside in red. 11

14 COMMERCIAL GAUGES R Mechanical Pressure > Commercial Pressure > PM MECHANICAL PRESSURE Type PM WIKA type PM gauges are designed for U-clamp panel mounting. They feature a black ABS case and low friction Swiss movement to insure a long, reliable service life. The PM design fits into U.S. size panel cut-outs. Size: 1½ & 2 Case: Black ABS Wetted Parts: Copper alloy Window: Clear plastic Dial: White ABS Pointer: Accuracy: Connection: Black ABS ± 3/2/3% of span ASME B Grade B Center back mount, with U-clamp Type PM Size 1½" 2" Connection CBM/UC CBM/UC Conn. Size 1/8" NPT 1/4" NPT 1/4" NPT Press. Scale PSI PSI PSI/KPA 30" Hg "-0-15 psi 30"-0-30 psi 30"-0-60 psi 30" psi 30" psi 30" psi 15 psi psi psi psi psi psi psi psi 600 psi 800 psi 1,000 psi 1,500 psi 2,000 psi 3,000 psi 5,000 psi Accessory order codes (installed at factory) Restrictor + R Available Options Restrictor Cleaned for oxygen service Special connections Applications Pneumatics HVAC Suitable for all media that will not obstruct the pressure system or attack copper alloy parts Abbreviations CBM - Center back mount UC - U-clamp Stock items shown in blue print. 12

15 COMMERCIAL GAUGES R Mechanical Pressure > Commercial Gauges > CT Type CT WIKA type CT 4½ gauges are specifically designed for the HVAC market as a contractor s gauge. This gauge features a stainless steel case, brass wetted parts, and an adjustable pointer. Contractor s gauges are designed for static applications and may not be well-suited to high vibration and pulsation applications. Size: 4½ Case: Stainless steel, matte-finish Wetted Parts: Copper alloy Window: Snap-in polycarbonate Dial: White aluminum Pointer: Accuracy: Connection: Black aluminum, adjustable ± 1% of span ASME B Grade 1A Lower mount MECHANICAL PRESSURE Type CT Size 4½" Connection LM Conn. Size 1/4" NPT Press. Scale PSI PSI/KPA 30" Hg 30"-0-15 psi "-0-30 psi "-0-60 psi " psi " psi " psi " psi " psi 15 psi psi psi psi psi psi psi psi psi Accessory order codes (installed at factory) Rear flange, SS + RF Restrictor + R Stock items shown in blue print. Available Options Cleaned for oxygen service Special connections Restrictor Stainless steel case with rear flange Black steel case Abbreviations LM - Lower mount SS - Stainless steel 13

16 COMMERCIAL GAUGES R Mechanical Pressure > Commercial Gauges > MECHANICAL PRESSURE Type The WIKA type gauge is the ideal choice for OEM and general industrial applications requiring an economical, liquid-filled pressure gauge. The glycerine liquid fill dampens the Bourdon tube and reduces wear of the movement, extending gauge life. Typical applications of the type include air compressors, hydraulic presses, pumps, marine engines, as well as other types of industrial hydraulic and pneumatic equipment. Size: 1½ & 2½ Case: Black ABS Wetted Parts: Copper alloy Window: Clear plastic Dial: White ABS Pointer: Black ABS Accuracy: Connection: Liquid Fill: ± 3/2/3% of span ASME B Grade B Lower or center back mount (1½ CBM only) Glycerine Type Size 1½" 2½" Connection CBM LM CBM Conn. Size 1/8" NPT 1/4" NPT Press. Scale PSI PSI PSI 30" Hg "-0-15 psi 30"-0-30 psi "-0-60 psi " psi " psi " psi psi psi psi psi psi psi psi psi psi psi 1,000 psi ,500 psi ,000 psi ,000 psi ,000 psi Accessory order codes (installed at factory) Front flange, ABS FF UC, steel UC Restrictor + R Stock items shown in blue print. Available Options Restrictor Other connections 2 case size (LM & CBM) Abbreviations LM - Lower mount CBM - Center back mount UC - U-clamp 14

17 COMMERCIAL GAUGES R Mechanical Pressure > Commercial Gauges > Type WIKA type features a 1½ size liquid-filled gauge with a stainless steel case. The glycerine case fill dampens and lubricates the gauge internals, extending the life of the gauge. The gauge is ideal for applications with high dynamic pressure pulsations and vibrations. Size: 1½ Case: Stainless steel, matte-finish Wetted Parts: Copper alloy Window: Clear plastic Dial: White aluminum Pointer: Accuracy: Black aluminum ± 3/2/3% of span per ASME B Grade B MECHANICAL PRESSURE Type Size 1½" Connection LM CBM CBM/UC Conn. Size 1/8" NPT Press. Scale¹ PSI PSI PSI 30" Hg "-0-15 psi "-0-30 psi "-0-60 psi " psi " psi " psi " psi 30" psi 15 psi psi psi psi psi psi psi psi psi psi 1,000 psi ,500 psi ,000 psi ,000 psi ,000 psi Accessory order codes (installed at factory) Restrictor R Silicone case fill SIL Available Options Other pressure connections U-clamp bracket for panel mounting (CBM only) Restrictor Alternate case fills Note: For options not shown - consult your WIKA distributor or the factory. Abbreviations LM - Lower mount CBM - Center back mount SS - Stainless steel Stock items shown in blue print. 15

18 INDUSTRIAL GAUGES R Mechanical Pressure > Industrial Gauges > MECHANICAL PRESSURE Type Type gauges feature 316 SS wetted parts, a 304 SS case, and a snap-in, acrylic window. When installation space is limited and stainless steel wetted parts are needed, WIKA type is the best choice. The stainless steel construction also makes these gauges ideal for harsh environments. Size: 1½ & 2 Case: 304 SS, matte-finish Wetted Parts: 316L SS Window: Snap-in polycarbonate Dial: White aluminum Pointer: Accuracy: Connection: Black aluminum ± 2.5% of span Lower or center back mount Type Size 1½" 2" Connection LM CBM LM CBM LM CBM Conn. Size 1/8" NPT 1/8" NPT 1/4" NPT Press. Scale¹ PSI PSI PSI PSI PSI PSI 30" Hg 30"-0-15 psi "-0-30 psi 30"-0-60 psi " psi " psi " psi 15 psi 30 psi psi psi psi psi 300 psi 400 psi 600 psi 800 psi ,000 psi 1,500 psi 2,000 psi 3,000 psi ,000 psi 10,000 psi Accessory order codes (installed at factory) Restrictor + R Available Options Restrictor 2½" case size U-clamp bracket Front or rear flange Instrument glass window Cleaned for oxygen service Other connections Applications Suitable for corrosive environments and gaseous or liquid media that will not obstruct the pressure system Ideal when a smaller size instrument is needed CDA (Clean Dry Air) applications Abbreviations LM - Lower mount CBM - Center back mount SS - Stainless steel Stock items shown in blue print. 16

19 INDUSTRIAL GAUGES R Mechanical Pressure > Industrial Gauges > 13X.53 Type 13X.53 Type 13X.53 stainless steel gauges provide resistance to corrosive media and environments. They feature 316 SS wetted parts, series 300 SS case and movement, and a welded case-to-socket connection. Type gauges are field liquid fillable or available filled from the factory. This gauge is designed for static applications and may not be well-suited to high vibration and pulsation applications. Size: 4 Case: 304 SS Wetted Parts: 316L SS Window: Polycarbonate Dial: White aluminum Pointer: Black aluminum Accuracy: Connection: ± 3/2/3% of span ASME B Grade B Lower mount MECHANICAL PRESSURE Type Size 4" Connection LM Conn. Size 1/4" NPT 1/2" NPT Press. Scale PSI PSI 30 psi psi psi psi psi psi psi psi psi 1,000 psi ,500 psi ,000 psi ,000 psi ,000 psi ,000 psi ,000 psi Accessory order codes (installed at factory) Rear flange, SS + RF Restrictor + R Glycerine fill Type Available Options Cleaned for oxygen service Other connections Restrictor Special connections Case fillings Applications With liquid-filled case for applications with high dynamic pressure pulsations or vibration Suitable for corrosive environments and gaseous or liquid media that will not obstruct the pressure system Process industry: chemical/petrochemical, power stations, mining, on and offshore, environmental technology, mechanical engineering and plant construction Abbreviations LM - Lower mount SS - Stainless steel Stock items shown in blue print. 17

20 INDUSTRIAL GAUGES R Mechanical Pressure > Industrial Gauges > MECHANICAL PRESSURE Type Type pressure gauge is ideal for boiler room service or other applications where its large dial size makes it easier to read from a distance. These gauges feature a black-painted steel case and a ±1.0% accuracy. Size: 10 Case: Black-painted steel Ring: Back-painted steel Wetted Parts: Copper alloy Window: Flat instrument glass Dial: White aluminum Pointer: Accuracy: Connection: Black aluminum, adjustable ± 1% of span ASME B Grade 1A Lower mount Type Size 10" Connection LM Conn. Size 1/2" NPT Press. Scale PSI/BAR 30" Hg 30"-0-15 psi 30"-0-30 psi 30"-0-60 psi 30" psi 30" psi 30" psi 15 psi 30 psi psi 100 psi psi 200 psi psi psi psi psi ,000 psi ,500 psi 2,000 psi ,000 psi ,000 psi ,000 psi 15,000 psi Accessory order codes Rear flange + RF Restrictor + R Stock items shown in blue print. Available Options Lower back mount connection 316 SS wetted parts (Type ) Cleaned for oxygen service Special connections Applications For plants and equipment where measured values must be read from a distance Suitable for gaseous or liquid media that will not obstruct the pressure system Abbreviations LM - Lower mount SS - Stainless steel 18