Product data sheet TAS 80 IT

Transcription

1 Product data sheet Doc-Version: 1.1 RSE Informationstechnologie GmbH Silberbergstraße 9, 9400 Wolfsberg, Austria Phone: +43(0)4352/2440-0, Fax: +43(0)4352/

2 the classical telecontrol and fault warning system. MAIN CHARACTERISTICS Natural voice with high reproduction quality 6 numbers with individual, parameterisable calling sequence Remote servicing capability Plugable connecting terminals Integrated emergency power supply GSM / GPRS / Analogue / ISDN Product data sheet 2

3 RANGE OF APPLICATIONS The is a classical telecontrol and fault warning system, which is mostly used in monitoring applications for environmental engineering systems, in power generating and in industrial settings. In addition to issuing an alarm by means of voice transmission or text messaging, it can be used to query measured data (level status, turbine performance). The contacts can be connected either using physical inputs or via an interface. The available communication media such as GSM, analogue and ISDN allow the customised assembly depending on site conditions. TAS systems can be networked in any order. The RSE data voice technology (data transmission in the voice channel) generates significant cost benefits compared to traditional data transmission methods. Product data sheet 3

4 SAMPLE APPLICATIONS Monitoring and data logging Plant monitoring Operating data logging Fault warning system Measured data querying Remote switching telephone connection voice-driven with acknowledgement secured by access code change-over or impulse contact query relay status log in history Telecontrol Telecontrol commands Networking of systems Level monitoring Fault warning transmission Product data sheet 4

5 TECHNICAL SPECIFICATIONS Physical contacts Digital inputs 12 Input voltage VDC Input resistance Ohm Galvanic isolation Optoisolator plug-in terminals RM 3.81mm Integrated surge protection Trip voltage 47 Volt Maximum current 5 A (8/20µs) Auxiliary voltage 12 VDC Auxiliary current limitation 80 ma DC Analogue values 4 Input current 0/4..20 ma DC Resolution 10 bit Input resistance 114 Ohm Input voltage VDC plug-in terminals RM 3.81mm Galvanic isolation No Initial mass Integrated surge protection Trip voltage 15 Volt Maximum current 5 A (8/20µs) Relay outputs 4 max. operating voltage 230 VAC max. operating current 5 A plug-in terminals 5,08 Grid mm Resistance to overvoltage 3,75 kv Interfaces RS232 1 Baud rate bps Plug 8p Minidin Crossbondable data lines CAN bus interfaces 1 Baud rate bps Plug type 15p SubD Number of plugs 1 Networking Integrated bus terminal connectable Integrated surge protection Trip voltage 13,3 Volt Maximum current 5 A (8/20µs) Product data sheet 5

6 Internal modems GSM modem MC55 Frequency range 900/1800,1900 MHz Voice Full rate ETS Data GPRS Class 10 GPRS Direct data connection CSD 9600 bps SMS Text/PDU FAX Class1/Class2 G3 Antenna plug FME female SIM CARD holder 3V Sim Card Analogue modem RS-M01 approved A Voice Hz Data V.22 to 2k4 full duplex Plug 6p6c Western Integrated surge protection 3 level Trip voltage 144 Volt Maximum current 2500 A (8/20µs) ISDN modem ISDN-M01 approved A/D Voice Hz Data V.75 64k full duplex Plug 6p6c Western Integrated surge protection 2 level Trip voltage 144 Volt Maximum current 5 A (8/20µs) Target devices Voice transmission Voice over IP Message Message with acknowledgement Text messages SMS via GSM SMS with acknowledgement via GSM FAX via GSM receiving Telecontrol in the voice channel datavoice in the data channel via TCP/IP GPRS via CAN Protocols Moeller Easy800 series Product data sheet 6

7 Data structure General variables Digital values 48 Analogue values 20 Counted values 20 Phone numbers 40 Announcement texts 48 PLC code User-configurable display Networking and telecontrol Stations 10 Profiles Data acquisition Data memory Records Hardware General data Dimensions (WxHxD) 226x122x65 mm Weight with battery pack 1,25 kg Protection type IP20 Operating temperature C Storage temperature C relative humidity %rh at 30 C CPU and memory CPU C509 Infineon Clock rate 18 MHz Operating system RTX51 ARM wedge Real time clock, battery-buffered SD card reader Microcard Programme memory 512 k Byte Main memory 64 k Byte Data memory 512 k Byte File system Display and operation Display 2x16 characters LED modem status 2 LED COM port activity 2 LED DH labelling 4 LED CAN activity 1 Number of keys 6 Power supply and UPS 24 VDC supply max. current consumption 300 ma 230 VAC supply max. current consumption 50 ma Battery type Lead gel Battery capacity 850 mah Final battery charging current 13,6 Volt Bridging time 6 Hours Voice storage data Memory format 8 bit analogue Number of phrases 127 Registration term 256 sec at 4.0kHz 190 sec at 5.3kHz Product data sheet 7

8 DIMENSIONS INSTALLATION INSTRUCTIONS Product data sheet 8