Fieldbus slave modules w/o I/Os
|
|
|
- Franklin Joseph
- 7 years ago
- Views:
Transcription
1 308 Fieldbus slave modules w/o I/Os Order number Figure Type IM 253CAN, CANopen slave 2 SDOs, PDO linking, PDO mapping IM 253CAN, CANopen slave 2 SDOs, PDO linking, PDO mapping IM 253DN, DeviceNET slave IM 253DP, PROFIBUS-DP slave General information Note Features CANopen slave, CANopen slave, Group 2 only Device 10 Rx und 10 Tx PDO, 10 Rx and 10 Tx PDO, - employs predefined connection set, Baudrates: 125, 250, 500 kbaud, For max. 32 pheripheral modules (8 analog) PROFIBUS-DP slave (DP-V0, DP-V1), modules (16 analog), 244 Byte input and 244 Byte output data Technical data power supply Power supply (rated value) DC 24 V DC 24 V DC 24 V DC 24 V Power supply (permitted range) DC V DC V DC V DC V Reverse polarity protection - Current consumption (no-load operation) ma - Current consumption (rated value) 700 ma 300 ma 800 ma 1 A Inrush current I²t Max. current drain at backplane bus 3.5 A 0.8 A 3.5 A 3.5 A Max. current drain load supply Power loss Status information, alarms, diagnostics Status display yes yes yes yes Interrupts yes, parameterizable yes, parameterizable no yes, parameterizable Process alarm no no no yes, parameterizable Diagnostic interrupt yes, parameterizable yes, parameterizable no yes, parameterizable Diagnostic functions yes, parameterizable yes, parameterizable yes yes, parameterizable Diagnostics information read-out possible possible none possible Supply voltage display yes yes yes green LED Group error display yes yes yes yes Channel error display none none none none Hardware config Racks, max Modules per rack, max Number of digital modules, max Number of analog modules, max Communication Field bus CANopen CANopen DeviceNet PROFIBUS-DP to EN Type of interface CAN CAN - RS485
2 Fieldbus slave modules w/o I/Os Interface modules Order number Connector Sub-D, 9-pin, male Sub-D, 9-pin, male 5-pin Open Style Sub-D, 9-pin, female Connector Topology Electrically isolated Number of participants, max Node addresses Transmission speed, min. 10 kbit/s 10 kbit/s 125 kbit/s 9.6 kbit/s Transmission speed, max. 1 Mbit/s 1 Mbit/s 500 kbit/s 12 Mbit/s Address range inputs, max. 80 Byte 80 Byte 256 Byte 244 Byte Address range outputs, max. 80 Byte 80 Byte 256 Byte 244 Byte Number of TxPDOs, max Number of RxPDOs, max Mechanical data Dimensions (WxHxD) Weight 100 g 90 g 90 g 100 g Environmental conditions Operating temperature 0 C to 60 C 0 C to 60 C 0 C to 60 C 0 C to 60 C Storage temperature -25 C to 70 C -25 C to 70 C -25 C to 70 C -25 C to 70 C Certifications UL508 certification yes yes yes yes 309
3 Connections, Interfaces CAN CAN 310
4 Fieldbus slave modules w/o I/Os Order number Figure Type IM 253DPO, PROFIBUS-DP slave IM 253DP, PROFIBUS-DP slave IM 253DPR, PROFIBUS-DP slave IM 253EC, EtherCAT slave General information Note Features PROFIBUS-DP slave (DP-V0, DP-V1), PROFIBUS-DP slave (DP-V0, DP-V1), PROFIBUS-DP slave, EtherCAT slave, modules (16 analog), 244 Byte input und 244 Byte output data For max. 8 peripheral modules, 244 Byte input and 244 Byte output data Fieldbus slave modules w/o I/Os Interface modules 2 redundant channels, modules (16 analog), 152 Byte input and 152 Byte output data modules, Ethernet based fieldbus system with high realtime capabilities, Identical communication mechanism like CANopen Technical data power supply Power supply (rated value) DC 24 V DC 24 V DC 24 V DC 24 V Power supply (permitted range) DC V DC V DC V DC V Reverse polarity protection Current consumption (no-load operation) Current consumption (rated value) 1 A 0.3 A 1 A 1 A Inrush current I²t Max. current drain at backplane bus 3.5 A 0.8 A 3.5 A 3.5 A Max. current drain load supply Power loss Status information, alarms, diagnostics Status display yes yes yes yes Interrupts yes, parameterizable yes, parameterizable yes, parameterizable no Process alarm yes, parameterizable yes, parameterizable yes, parameterizable no Diagnostic interrupt yes, parameterizable yes, parameterizable yes, parameterizable no Diagnostic functions yes, parameterizable yes, parameterizable yes, parameterizable no Diagnostics information read-out possible possible none possible Supply voltage display green LED green LED green LED green LED Group error display red SF LED red SF LED yes red SF LED Channel error display none none none none Hardware config Racks, max Modules per rack, max Number of digital modules, max Number of analog modules, max
5 Order number Communication Field bus PROFIBUS-DP to EN PROFIBUS-DP to EN PROFIBUS-DP to EN EtherCat Type of interface FOC RS485 RS485 Ethernet 10/100 MBit Connector 2-pin FOC POF/HCS Sub-D, 9-pin, female Sub-D, 9-pin, female RJ45 Topology Line structure with twowire FOC Star topology Electrically isolated Number of participants, max Node addresses Transmission speed, min. 9.6 kbit/s 9.6 kbit/s 9.6 kbit/s 10 Mbit/s Transmission speed, max. 12 Mbit/s 12 Mbit/s 12 Mbit/s 100 Mbit/s Address range inputs, max. 244 Byte 244 Byte 152 Byte 1 KB Address range outputs, max. 244 Byte 244 Byte 152 Byte 1 KB Number of TxPDOs, max Number of RxPDOs, max Mechanical data Dimensions (WxHxD) 50.8 mm x 76 mm x Weight 110 g 90 g 90 g 70 g Environmental conditions Operating temperature 0 C to 60 C 0 C to 60 C 0 C to 60 C 0 C to 60 C Storage temperature -25 C to 70 C -25 C to 70 C -25 C to 70 C -25 C to 70 C Certifications UL508 certification yes yes yes yes 312
6 IN Fieldbus slave modules w/o I/Os Interface modules Connections, Interfaces 313
7 Fieldbus slave modules w/o I/Os Order number Figure Type IM 253IBS, INTERBUS slave IM 253NET, Ethernet slave General information Note - - Features INTERBUS slave, For 16 input and 16 output modules Ethernet coupler mit ModbusTCP und Siemens S5 Header protokol, modules, Max. 256 Byte I/O data, RJ45 jack 100BaseTX, 10BaseT Technical data power supply Power supply (rated value) DC 24 V DC 24 V Power supply (permitted range) DC V DC V Reverse polarity protection Current consumption (no-load operation) - - Current consumption (rated value) 300 ma 1 A Inrush current - - I²t - - Max. current drain at backplane bus 3.5 A 3.5 A Max. current drain load supply - - Power loss - - Status information, alarms, diagnostics Status display yes yes Interrupts no no Process alarm no no Diagnostic interrupt no no Diagnostic functions no no Diagnostics information read-out none possible Supply voltage display green LED yes Group error display red LED red LED Channel error display none none Hardware config Racks, max. 1 1 Modules per rack, max Number of digital modules, max Number of analog modules, max
8 Order number Communication Field bus INTERBUS-S to DIN Ethernet MODBUS / Siemens S5 Header Type of interface RS422 Ethernet 10/100 MBit Connector Sub-D, 9-pin, male (in) and female (out) RJ45 Topology Ring with integrated return line Star topology Electrically isolated Number of participants, max Node addresses - IP V4 address Transmission speed, min Mbit/s Transmission speed, max. 500 kbit/s 100 Mbit/s Address range inputs, max. 20 Byte 256 Byte Address range outputs, max. 20 Byte 256 Byte Number of TxPDOs, max. - - Number of RxPDOs, max. - - Mechanical data Dimensions (WxHxD) Weight 100 g 90 g Environmental conditions Operating temperature 0 C to 60 C 0 C to 60 C Storage temperature -25 C to 70 C -25 C to 70 C Certifications UL508 certification yes yes Fieldbus slave modules w/o I/Os Interface modules 315
9 Connections, Interfaces NET RJ45 316
Fieldbus slave modules with I/Os, DIO
140 Fieldbus slave modules with I/Os, DIO 1534CF00 1534CH00 1534PF00 1534PH00 1536CH00 1536CL10 1536PH00 1536PL00 Order number 1534CF00 1534CH00 1534PF00 1534PH00 Figure Type SM 153, CANopen slave, DIO
Data sheet SLIO CPU 015 (015-CEFPR00)
Data sheet SLIO CPU 015 (015-CEFPR00) Technical data Order no. 015-CEFPR00 SLIO CPU 015 Module ID - General information Note - Features SPEED7 technology 256 kb work memory Memory extension (max. 512 kb)
Process modules Digital input PMI for 24 V DC inputs for 120 V AC inputs
E031026 000823 Process modules Digital input PMI for inputs for 120 V AC inputs PMI Input E4, E5, GND L- PMI 120 V AC Input E4, E5, Common C E6, E7, GND L- E6, E7, Common C LEDs for the inputs operation
Main Catalog 2012/2013 for specialists in automation and control technology
Main Catalog 2012/2013 for specialists in automation and control technology www.vipa.com Welcome to VIPA This is VIPA Specialists in automation and control systems. Developer in some to the most advanced
GE Power Controls FIELDBUS APPENDIX PROFIBUS DP. Doc. No.: ASTAT Plus PB_Appendix-v0
GE Power Controls = FIELDBUS APPENDIX PROFIBUS DP = Doc. No.: ASTAT Plus PB_Appendix-v0 Fieldbus Appendix: PROFIBUS DP 1 Fieldbus Introduction...... 2 1.1 Introduction to Profibus-DP... 2 1.2 Network Overview...
CP 342-5. Page 1342 Mar 2008 Siemens ITS
CP 342-5 Function The CP 342-5 provides access to different communication services of the PROFIBUS bus system: PROFIBUS DP (according to IEC 61158/61784, master or slave) PG/OP communication S7 communication
The CP 342-5 provides access to different communication services of the PROFIBUS bus system:
SIPLUS CP 342-5 Function The CP 342-5 provides access to different communication services of the PROFIBUS bus system: PROFIBUS DP (according to IEC 61158/61784, master or slave) PG/OP communication S7
http://support.automation.siemens.com/ww/view/en/4067870&td=1
6ES7316-2AG00-0AB0 SIMATIC S7-300, CPU 316 Technical / CAx data nmlkji Technical Data nmlkj CAx data As of 2010-01-24 Power supply Input voltage Rated value (DC) permissible range, lower limit (DC) permissible
Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
IBS IP I/O Gateway. Data Sheet INTERBUS-S. Coupling Module for Two InterBus-S Lines
IBS IP I/O Gateway Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 Main Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.stevenengineering.com Data Sheet
The CP 342-5 FO provides access to different communication services of the PROFIBUS bus system:
CP 342-5 FO Function The CP 342-5 FO provides access to different communication services of the PROFIBUS bus system: PROFIBUS DP (according to IEC 61 158/61784, master or slave) PG/OP communication S7
Set for Profibus DPV1 in IP20 TI-BL20-DPV1-8
Type code Ident no. 1545007 Number of channels 8 Dimensions (W x L x H) 110.3 x 128.9 x 74.4 mm Cable max. 50 m between interface and read/write head 2 decimal rotary coding switches for the adjustment
SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 128 KBYTE WORKING MEMORY 2
6ES7315-2AG10-0AB0 Page 1 Product data sheet 6ES7315-2AG10-0AB0 SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 128 KBYTE WORKING MEMORY 2. INTERFACE DP-MASTER/SLAVE
CPU systron S 200 - S 250 - S 250c. systron S 200 - S 250 - S 250c. CPUs to the process modules. Stand-alone PLC
E031019 000823 systron S 200 - S 250 - S 250c CPU systron S 200 - S 250 - S 250c 45 mm width Flexible and expandable Easy to use software for bus connection (S 250/ S 250c) CPUs to the process modules
VIPA System SLIO. IM 053-1EC00 Manual
VIPA System SLIO IM 053-1EC00 Manual HB300E_IM RE_053-1EC00 Rev. 11/03 January 2011 Copyright VIPA GmbH. All Rights Reserved. This document contains proprietary information of VIPA and is not to be disclosed
Bus modules systron PM
E031006 000823 Bus modules systron PM Bus systems Many bus systems have been developed to accommodate PLCs and associated modules made by specific manufacturers. However, due to diversified application
TX OPEN RS232/485 module
s 8 185 8185P01 TX-I/O ; DESIGO OPEN TX OPEN RS/485 module for integrating third-party systems and devices to DESIGO (V4 or higher) TXI1.OPEN Platform to integrate third-party systems and devices to the
IBS IP KIS A. Data Sheet INTERBUS-S. Digital I/O Module
IBS IP KIS A Data Sheet Digital I/O Module Data Sheet Revision C Product Description The IBS KIS IP A module is a digital I/O module for the extended installation remote bus. Features - InterBuS-S protocol
Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
HARTING econ 3000 Introduction and features
HARTING Introduction and features HARTING es, unmanaged, for installation in control cabinets General Description Features The Fast es of the product family HARTING are suitable for industrial applications
PCS0100en 02.2008. Persy Control Services B.V. Netherlands
P-Bus Gateway PBGW2.128 Universal gateway between the P-bus protocol and open standard protocols. The variety of available electrical interfaces on the gateway offers a wide range of possibilities for
CPU 319-3 PN/DP. Function
CPU 319-3 PN/DP Function Password protection; a password concept protects the user program from unauthorized access. Block encryption; the functions (FCs) and function blocks (FBs) can be stored in the
6ES7314-6CG03-0AB0. Supply voltages Rated value 24 V DC Yes permissible range, upper limit (DC) circuit breaker type B, min. 4 A
6ES7314-6CG03-0AB0 Page 1 Product data sheet 6ES7314-6CG03-0AB0 SIMATIC S7-300, CPU 314C-2DP COMPACT CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED
6ES7 313-6BE01-0AB0 6ES7 313-5BE01-0AB0
4 SIMATIC S7-300 Central processing units CPU 312C to CPU 317F-2 DP CPU 317F-2 DP The failsafe CPU with a large program memory and quantity framework for demanding applications For configuration of a failsaf
Using the AnyBus -X Gateway to Communicate between a DVT camera and a Profibus Master
Using the AnyBus -X Gateway to Communicate between a DVT camera and a Profibus Master Page 1 of 13 Table of Contents 1 OVERVIEW... 3 2 INSTALLING AND CONFIGURING THE ANYBUS -X GENERIC GATEWAY AND ETHERNET
Set for PROFINET IO in IP20 TI-BL20-EN-PN-4
Cable max. 50 m between interface and read/write head Connection of up to 4 read/write heads via BL ident extension cables Mixed operation of HF and UHF read/ write heads Connectors /S2500 Type code Ident
CPUs - CPU 315-2 PN/DP
Overview The CPU with a medium program memory and quantity framework High processing performance in binary and floating-point arithmetic Used as a central controller on production lines with central and
Installation Manual (English) Adjustable Active DP Terminator T1-Pepper Active RS485 segment termination for non-compliant cable
Installation Manual (English) Adjustable Active DP Terminator T1-Pepper Active RS485 segment termination for non-compliant cable Designed for use with the COMbricks SALT repeater All baudrates Redundant
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS safe and Safe Link in one device up to 450 devices 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves
AS-i 3.0 Gateways, PROFIsafe via PROFINET or PROFIBUS
via PROFINET or AS-i 3.0 Gateways, via PROFINET or 2 / 1 Master, PROFINET / Slave AS-i Safety input slaves report via AS-i Safety output slaves switch via 1 Safety Monitor for 2 AS-i networks Operation
Hardware Manual RM CANview Ethernet
Hardware Manual RM CANview Ethernet Table of Contents 1 Legal Regulations...3 2 About the Device...4 3 Disposal...4 4 Important Information for Using CANview Ethernet...5 4.1 How to Open the Protection
applicomio Profibus-DP
BradCommunications Profibus-DP network interface cards allow deterministic I/O data acquisition for PC-based control applications. Features New! Support of Windows 32-bit and 64-bit (WoW64) Support of
Using installed Fieldbus Wiring to carry Ethernet Communications
Using installed Fieldbus Wiring to carry Ethernet Communications Modbus Plus, Data Highway, GE Genius, Profibus, ControlNet, DeviceNet, InterbusS and many other RS232 or RS4422 cables Key Issues when upgrading
TPM Product Type 107-D162-NNT 48-channel digital input and 16-channel digital output module with pluggable terminal
Product Type 107-D162-NNT 48-channel digital input and 16-channel digital output module with pluggable terminal Specifications Size: (L122 x W123 x H104 mm) Series Interface: Half duplex RS-485 with transformer
PCAN-B10011S Bus Converter High-speed CAN to Truck Trailer CAN. User Manual. Document version 2.1.0 (2013-11-15)
PCAN-B10011S Bus Converter High-speed CAN to Truck Trailer CAN User Manual Document version 2.1.0 (2013-11-15) Products taken into account Product Name Model Part number PCAN-B10011S IPEH-002041 CANopen
Lecture 4 Profibus. Urban Bilstrup Urban.Bilstrup@ide.hh.se
Lecture 4 Profibus Urban Bilstrup Urban.Bilstrup@ide.hh.se Profibus Outline Introduction Profibus-DP Physical Layer Link Layer Application Layer 2 Profibus Introduction Three different versions of PROFIBUS
SIMATIC S7-1200. It s the Interplay that makes the difference. Siemens AG 2010. All Rights Reserved.
SIMATIC S7-1200 It s the Interplay that makes the difference SIMATIC S7-1200 Controller SIMATIC S7-1200 CPUs CPU 1211C 3 configurations per CPU Dimensions W x H x D (mm) CPU 1212C CPU 1214C DC/DC/DC, AC/DC/RLY,
ANTAL ELECTRONIC Field Bus and Communication Technology. Manual PDP2CAN. Version 3.08
ANTAL ELECTRONIC Field Bus and Communication Technology Manual PDP2CAN Version 3.08 ANTAL ELECTRONIC Höfles 4 91322 Gräfenberg Telefon (+49) 09192/9256 0 Fax (+49) 09192/9256 78 Important Notice Antal
Chassis, Power Supply, and Element Management
Chassis, Power Supply, and Element Management C-COR CHP Max5000 Converged Headend Platform Accelerate deployment of new, revenue generating advanced services Innovative technology creating converged high-
154 PHOENIX CONTACT Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370 Main Office: (650) 588-9200-Outside Local
154 PHOENIX CONTACT PROFINET The future-oriented system solution PROFINET is the realtime Ethernet approach that can be used in all industrial motion control fields - from factory automation to process
RIO Field Bus System / microline PLC
RIO Field Bus System / microline PLC Remote I/O Systems and Controllers System Description Contents 3 Introduction 33 Expansion Modules 4 RIO Modular Field Bus System System and Components 34 Spring-Loaded
5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual
5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel...
RFID systems. Communications modules ASM 450 4/139. Overview
Overview The low-cost communications module ASM 50 is an autonomous PROFIBUS DP slave for the operation of MOBY components via the PROFIBUS DP: SIMATIC S7 (including FB/FC software) SINUMERIK SICOMP IMC,
6ES7313-5BF03-0AB0. Supply voltages Rated value 24 V DC Yes permissible range, upper limit (DC) circuit breaker type B, min. 4 A
6ES7313-5BF03-0AB0 Page 1 Product data sheet 6ES7313-5BF03-0AB0 SIMATIC S7-300, CPU 313C, COMPACT CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO 1 PT100, 3 FAST COUNTERS (30 KHZ), INTEGRATED 24V DC POWER SUPPLY,
SIMATIC. ET 200S distributed I/O Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0) Preface. Properties 1. Diagnostics 2.
SIMATIC ET 200S distributed I/O SIMATIC Preface Properties 1 Diagnostics 2 ET 200S distributed I/O Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0) Manual 04/2007 A5E01077385-01 Safety Guidelines
Install the DeviceNet Module using the following procedure:
Installation INSTALLATION INSTRUCTIONS: MCD DEVICENET MODULE Order Code: 175G9002 1. Installation Install the DeviceNet Module using the following procedure: 1. Remove control power and mains supply from
User Manual Revision 1.000 English
Document code: MN67605_ENG Revision 1.000 Pagina 1 di 22 User Manual Revision 1.000 English PROFINET / PROFIBUS Slave - Converter (Order Code: HD67605-A1) for Website information: www.adfweb.com?product=hd67605
HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
EZmoto V2. Product description Rev. 6 10/01/2014. EZmoto V2 Product description Rev.6 10/01/2014
EZmoto V2 Product description Rev. 6 10/01/2014 1 Contents 1. Overview... 3 2. Hardware Interface Description... 3 2.1 Main features of the EZmoto... 3 2.2 Hardware block diagram... 4 2.3 Internal Hardware
CANtrol EC Modular Control System Powerful and versatile
Controls CANtrol EC Modular Control System Powerful and versatile CANtrol EC The modular control system Components of CANtrol EC 1 EC1000 Ethernet Controller 2 E-I/O EtherCAT I/O family communicating controlling
Modular I/O System Analog and Digital Interface Modules
OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part
Introduction to PROFIBUS and PROFINET
Introduction to PROFIBUS and PROFINET Andy Verwer Technical Officer for PROFIBUS UK Verwer Training & Consultancy Ltd Gold distributor PROFIBUS Characteristics PROFIBUS is a bi-directional digital communication
Digital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
Dupline Field- and Installationbus Dupline Profibus-DP Gateway Type G 3891 0020
Dupline Field- and Installationbus Dupline Profibus-DP Gateway Type G 3891 0020 Built-in Dupline channel generator PROFIBUS-DP slave according to EN 50 170 Certified by the PNO PROFIBUS-DP communication
G3 Series PROFIBUS DP Technical Manual
G3 Series PROFIBUS DP Technical 3835063 A - Table of Contents PAGE About PROFIBUS-DP...3 Overview...3 G3 PROFIBUS-DP Features...3 Cabling and Drop Line Lengths (as defined by PROFIBUS specification)...3
AN00140-003: Using Wago CANOpen IO
AN00140-003: Using Wago CANOpen IO Overview Baldor now offers WAGO Modular IO Systems for use with Mint Motion Controllers using the CANOpen field bus interface. The WAGO units provide a very flexible
deltadue series gateways: PROFIBUS DP, DeviceNet, CANopen, Modbus TCP to Modbus RTU
BT. 02.30 DXDY/E deltadue series gateways: PROFIBUS DP, DeviceNet, CANopen, TCP to Integrate Ascon instrumentation lines into your system DX 5000 RS232/ Line converter / Repeater / Line adapter Data transfer
M-series Virtual I/O Module 2
DeltaV Distributed Control System Product Data Sheet M-series Virtual I/O Module 2 Non-intrusive DeltaV I/O simulation Powerful integration solution Easy to use Modular, flexible packaging The M-series
HARTING mcon 1000 Introduction and features
Introduction and features HARTING mcon 1000 es, managed, for mounting onto top-hat mounting rail in control cabinets General Description Features Supporting Ethernet (10 Mbit/s), Fast Ethernet (100 Mbit/s)
Practical steps for a successful. PROFIBUS Project. Presented by Dr. Xiu Ji Manchester Metropolitan University
Practical steps for a successful PROFIBUS Project Presented by Dr. Xiu Ji Manchester Metropolitan University Basics of PROFIBUS Content Practical steps in the design and installation stages Segmentation:
SIMATIC. ET 200S distributed I/O Digital electronic module 8DI DC24V (6ES7131-4BF00-0AA0) Preface. Properties 1. Diagnostics 2.
SIMATIC ET 200S distributed I/O SIMATIC Preface Properties 1 Diagnostics 2 ET 200S distributed I/O Digital electronic module 8DI DC24V (6ES7131-4BF00-0AA0) Manual 04/2007 A5E01077339-01 Safety Guidelines
The intelligent Protocol Converter
PROTOCOL CONVERTER UNIGATE CL Easy installation Norm compliant Ready-to-use Configurable Programmable Designed & manufactured in Germany THE INTELLIGENT PROTOCOL CONVERTER FOR ETHERNET TCP/IP A SOLUTION
NC-12 Modbus Application
NC-12 Modbus Application NC-12 1 Table of Contents 1 Table of Contents... 2 2 Glossary... 3 SCADA...3 3 NC-12 Modbus in general... 3 4 Entire system... 4 4.1 PFC to PC connection alternatives...4 4.1.1
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications PRODUCT INFORMATION The benchmark for flexibility. Laser scanners of the BCL 20 series as variable as your requirements demand.
Industrial Bar Code Scanners
DS6400 Industrial Bar Code Scanners Configuration SW Tool ACR4 technology PackTrack APPLICATIONS Automated warehousing Medium conveyor sorting Reading on forklift trucks Picking systems Automated shop
TYPE APPROVAL CERTIFICATE
11 927-10 HH Company Beckhoff Automation GmbH & Co. KG Hülshorstweg 20 33415 Verl, GERMANY Product Description Type Beckhoff Bus Terminals System Modular I/O System Bus Terminals Digital Input, Digital
Communication Unit 560CMU05 Data sheet
RTU560 product line Communication Unit 560CMU05 Data sheet E1 10/100 MB LAN E2 10/100 MB LAN CP1, CP2 RS232C or RS485 Ethernet Controller Ethernet Controller USART Processor bus MPU ELAN520 /Flash Memory
Analogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001
Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.
Jena er Antriebstechnik. GmbH. 1. Introduction. 2. Properties. 3. Hardware. 4. Baud Rates. Brief Instructions - CANopen Interface
Project : ECOSTEP 100/200 Application Note No. 23 Page 1 of 10 Prepared by: Henrik Bräutigam Operation of ECOSTEP at CANopen Bus Date: 05-01-05 Brief Instructions - CANopen Interface 1. Introduction The
LevelOne IFE-0500 4-Port PoE + 1-Port TP Industrial Fast Ethernet Switch User Manual
LevelOne IFE-0500 4-Port PoE + 1-Port TP Industrial Fast Ethernet Switch User Manual Ver. 1.0.0-0711 1 FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital
System summary 2012/2013. for specialists in automation and control technology. www.vipa.com
System summary 2012/2013 for specialists in automation and control technology www.vipa.com Welcome to VIPA This is VIPA Specialists in automation and control systems. Developer in some to the most advanced
ENET-710. ENET-710 - Ethernet Module ENET-710 JAN / 06 FOUNDATION
ENET-710 ENET-710 - Ethernet Module JAN / 06 ENET-710 FOUNDATION E N E T 7 1 0 ME smar www.smar.com Specifications and information are subject to change without notice. Up-to-date address information is
SOFTLINK 300. CPU Specifications. Reference Manual
SOFTLINK 300 Reference Manual This manual is part of the documentation Package with the order number 300 314-1SL01 300 314-2DP01 300 315-2DP01 Edition 04/2011 i Preface Purpose of the manual This manual
EUROMAP 66-1. Protocol for Communication with Peripheral Equipment. General Description
EUROMAP 66-1 Protocol for Communication with Peripheral Equipment General Description Version 1.2, December 2002 (10 pages) This recommendation was prepared by the Technical Commission of EUROMAP. History
DU-H3ETX. 3-port USB Hub with 1 NWAY Ethernet / Fast Ethernet Port. User s Guide
DU-H3ETX 3-port USB Hub with 1 NWAY Ethernet / Fast Ethernet Port User s Guide 1 Table of Contents INTRODUCTION...1 TECHNOLOGY OVERVIEW... 1 ABOUT DU-H3ETX... 2 PRODUCT FEATURES... 3 INSTALLATION...4 ASPECT
Positioning Controller
Edition May 2008 Positioning Controller Application Note "CANopen Basic Information" Edition May 2008 EPOS 24/1, EPOS 24/5, EPOS 70/10, MCD EPOS 60W, EPOS2 50/5 Firmware version 2000h or higher Introduction
DVPPF02-H2. PROFIBUS DP Slave Communication Module Application Manual
DVPPF02-H2 PROFIBUS DP Slave Communication Module Application Manual Warning Please read this instruction carefully before use and follow this instruction to operate the device in order to prevent damages
Application. Characteristics RTU560. Data Sheet Communication Unit 560CMD11. Communication Unit 560CMD11
Communication Unit 560CMD11 The SLC works as master for the RTU560 serial peripheral bus (I/O-Interface/ Wired-OR-Bus ). The MPU is responsible for the other tasks. The MPU handles the absolute time and
Displayport Extender via 2 multimode fibers LC Duplex Connector Extends Displayport Link up to 200 meters
Description Displayport combines the audio and video through an interface. It supports high resolution displays and multiple displays with a single cable, and increases the efficiency and bandwidth of
Internet-bridge XPort
Ing. Z.Královský Ing. Petr Štol Perk 457 Okrajová 1356 675 22 STA 674 01 T EBÍ Development & production of control equipment Tel.: 568 870982 Tel.: 568 848179 Visualization, measurement and regulation
ZC-24DO CANopen I/O Module: 24 Digital Outputs
Z-PC Line EN ZC-24DO CANopen I/O Module: 24 Digital Outputs Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - DIP-switches
Components for industrial communication. Lenze Global Drive Providing the connection
Components for industrial communication Lenze Global Drive Providing the connection Modular Communication components 2 Modular machine and system engineering is becoming increasingly more important. It
1 Application Description... 3. 1.1 Objective... 3 1.2 Goals... 3
Contents Moxa Technical Support Team support@moxa.com 1 Application Description... 3 1.1 Objective... 3 1.2 Goals... 3 2 System Topology... 3 3 Hardware and Software Requirements... 4 4 Configuration...
3500/22M Transient Data Interface
3500/22M Transient Data Interface Bently Nevada* Asset Condition Monitoring Description The 3500 Transient Data Interface (TDI) is the interface between the 3500 monitoring system and GE s System 1* machinery
TF KEYBOARDS. inputs whose state can be displayed via software. They can be used immediately with the TE electromechanical keyboard [see accessories].
![TF KEYBOARDS. inputs whose state can be displayed via software. They can be used immediately with the TE electromechanical keyboard [see accessories].](/thumbs/40/21519328.jpg "TF KEYBOARDS. inputs whose state can be displayed via software. They can be used immediately with the TE electromechanical keyboard [see accessories].")
TF KEYBOARDS FIELDBUS keyboards Main applications Keyboards to manage machine movement in the following sectors: - Plastics - Packaging - Wood - Metalworking Main characteristics 32 keys - 32 LEDs USB
Substation Automation Products Relion 670/650 series IEC and ANSI Hardware
Substation Automation Products Relion 670/650 series IEC and ANSI Hardware ABB Group 1MRG014097 October 2013 Relion 670/650 series hardware Contents Relion 670/650 series Relion Hardware Relion Common
Research of PROFIBUS PA s integration in PROFINET IO
3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015) Research of PROFIBUS PA s integration in PROFINET IO Zhijia Yang 1, a *, Zhongsheng Li 1,2,b, Feng Qiao 2
SIMATIC NET. CP 243-2 AS-Interface Master B C. Preface Contents. Technical Description and Installation Instructions Interface to the User Program
Preface Contents SIMATIC NET CP 243-2 AS-Interface Master Manual Technical Description and Installation Instructions Interface to the User Program 2 in the S7-200 CPU Access to the Data of the AS-i Slaves
www.curtisinstruments.com
CANBUS I/O EXPANSION MODULE MODELS 56 / 56P FEATURES Eighteen multi-purpose I/O pins provide simple, flexible vehicle control system expansion. Two high-frequency (A, A) PWM driver outputs support a variety
PROFINET the Industrial Ethernet standard. Siemens AG 2013. Alle Rechte vorbehalten.
the Industrial Ethernet standard is 100% Ethernet is Ethernet Ethernet is the established standard in the IT world for fast exchange of data (IEEE 802.3) is always full duplex simultaneous communication
Field bus connections Link structure CMS link structure CMS, B-design. Brochure
link structure CMS, B-design Brochure 2 link structure CMS, B-design Bus coupler with driver Optional field bus connection with I/O function (CMS), B-design Bus coupler with driver Field bus protocol:
RPDO 1 TPDO 1 TPDO 5 TPDO 6 TPDO 7 TPDO 8
EN ZC - 6DI8DO CANopen I/O Module 6 Digital Input 8 Digital Output Or 8 Counters (3 bit) 8 Digital input 8 Digital output User Manual Contents: Features PDOs PDO Type Emergency Message Functional Diagrams
SIMATIC NET. S7-CPs for PROFIBUS. CP 443-5 Basic. Manual Part B3
SIMATIC NET S7-CPs for PROFIBUS Manual Part B3 CP 443-5 Basic 6GK7 443-5FX02-0XE0 Version 1 and higher (firmware version V4.0 and higher) for SIMATIC S7-400 / S7-400H Status and fault LEDs Mode selector
TURCK Modular Industrial I/O PROFIBUS -DP Products
TURCK Modular Industrial I/O PROFIBUS -DP Products Piconet Gateways Rugged, Fully Potted Stations IP 67 Protection Small Footprint Automatic Baud Rate Sensing SDPL-0404D-0003 SDPL-0404D-0004 SDPL-0404D-1003
FlexDSL MiniFlex. SHDSL.bis Up to 30Mbps Ddd. Ethernet. Features. Possible Applications
SHDSL.bis Up to 30Mbps Ddd Ethernet FlexDSL MiniFlex Features Up to 15Mbps Data Transmission per Copper Pair SHDSL and SHDSL.bis, TC-PAM16/32 Additional TC-PAM4/8/64/128 Available 1 or 2 Copper Pairs Support
40.3. Control Relays and Timers
.3 Contents EASY500/700/800 Intelligent Relays........ EASY/MFD Expansion Modules............ MFD Intelligent Relays................... EASY/MFD Communication Modules....... EASY/MFD Power Supplies, Accessories
MLC 9000+ TM Maximum Productivity and Versatility for Control without Compromise!
Data Sheet Maximum Productivity and Versatility for Control without Compromise! Basic Bus Communication Module DESCRIPTION The Basic Bus Communication Module (BCM) is part of the MLC 9000+ DIN rail mount
Rack mounted telephone- and leased line modem for industrial applications
Rack mounted telephone- and leased line modem for industrial applications TR-6 Rack modem for industrial PSTNand /-wire leased line applications The TR-6 is an analogue V. 9 -rack PSTN modem as well as
TX2123 RS485 TO ETHERNET ADAPTOR
TX2123 RS485 TO ETHERNET ADAPTOR Converts Datacomms between fibre optic Modbus TCP over Ethernet and hard-wired copper Modbus RTU over RS485 Fibre Optic MODBUS TCP/ IP Ethernet Copper MODBUS RTU RS485
Telephone- and leased line modem for industrial applications TD-36
Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased