PRODUCT DESCRIPTION PAGES. E205 Series 2PDT, 5 AMP RELAY 4-7. E405 Series 4PDT, 5 AMP RELAY 8-12
|
|
|
- Wesley Russell Evans
- 7 years ago
- Views:
Transcription
1 Index PRODUCT DESCRIPTION PAGES E205 Series 2PDT, 5 AMP RELAY 4-7 E405 Series 4PDT, 5 AMP RELAY Amp Series Track Mount 2PDT & 4PDT 5 AMP RELAY
2 Characteristics E205 General characteristics No. of poles Volume Mass Switching characteristics Operate 25 C Release 25 C Bounce time Mechanical life Contact rating Environmental characteristics Temperature Range E405 2 Form C (2PDT) 4 Form C (4PDT) 3.3 cm 3 [.2 in 3 ] 6.9 cm 3 [.42 in 3 ] 15.4 grams [.034 lb. Max] 26.4 grams [.058 lb. Max] 5 ms max. 6 ms max. 5 ms max. 6 ms max. 1 ms max. 1 ms max. 400,000 cycles Type of load (High level) Cycles x Vdc -70 C to 125 C 115 Vac 400 Hz 1 phase 115/200 Vac 400 Hz 3 phase Resistive amps 5 amps 5 amps Inductive 20 3 amps 5 amps 5 amps Motor amps 3 amps 3 amps Lamp amps n/a n/a Overload current n/a 20 amps 30 amps 30 amps Rupture current n/a 25 amps 40 amps 40 amps Vibration (Sinusoidal) 30 g Hz - E405 mounting style 3 20 g Hz Shock, any axis 200 g 6 ms - E405 mounting style g 6 ms Seal Hermetic (1 x 10-8 atm cm 3 /s) Electrical characteristics Contact voltage drop (@ Rated resistive load) - Initial - After guaranteed life Dielectric sea level - 60 Hz - After life 60 Hz Insulation Resistance - Initial - After life tests Reference Military Specifications 150 mv Max. 175 mv Max. Coil to Case All other points 1000 Vrms 1000 Vrms 750 Vrms 750 Vrms 100 Megohms 500 Vdc 50 Megohms 500 Vdc MIL-PRF
3 Part Numbering System E S 205 E 2 M D RELAY TYPE E Series OPTION S: = Internal Voltage Suppressor MODEL 205: SEE PAGE 4 405: SEE PAGE 8 COIL CODE 205: SEE PAGE 4 405: SEE PAGE 8 MOUNTING STYLES 205: SEE PAGE : SEE PAGE 9-11 TERMINATION STYLES 205: SEE PAGE 7 405: SEE PAGE 12 Special instructions or specifications D FOR CATALOG STANDARD OR A FOR CATALOG STANDARD WITHOUT ARC BARRIERS XXXX FOR SPECIAL INSTRUCTIONS OR SPECIFICATIONS (ASSIGNED BY DRI) 3
4 E205 Technical Characteristics Coil Characteristics DC COIL CODE A B D E F G H J Nominal coil voltage , Maximum pick-up voltage at 25 C 3,3 6,5 13,5 13,5 16, ,7 50 Maximum pick-up voltage at 125 C 4, Maximum hold voltage at 125 C 2,3 4, Minimum drop-out voltage at -70 C 0,25 0,5 1,2 1,5 2 2,4 4 5,5 Coil resistance ( ohms ± 10% at 25 C ) Max coil transient suppression (where applicable) VDC OTHER VOLTAGES AVAILABLE FROM FACTORY ON REQUEST Circuit Diagram B3 - X2 B2 B1 B3 - X2 B2 B1 A3 X1 A2 A1 A3 X1 A2 A1 E205 ES205 OPTIONAL INTERNAL VOLTAGE SUPPRESSOR 4
5 E205 Technical Characteristics Mounting styles DIMENSIONS ARE IN MM (IN.) UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0,25 [.010] STYLE 1 STYLE 2 NO MOUNT RAISED VERTICAL FLANGE MOUNT 16,3 MAX [.640 MAX] 8,1 [.320] STYLE 3 HORIZONTAL FLANGE MOUNT STYLE 8: M3 CAPTIVE SCREWS STYLE C: #4-40 UNC CAPTIVE SCREWS RAISED VERTICAL FLANGE MOUNT WITH CAPTIVE HARDWARE 5
6 E205 Technical Characteristics Mounting styles (cont d.) DIMENSIONS ARE IN MM (IN.) UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0,25 [.010] #4-40 UNC-2A CAPTIVE SCREW(2 PLCS.) [.156] 1,4 [.055] STYLE G RAISED VERTICAL FLANGE MOUNT WITH CAPTIVE HARDWARE STYLE M & R TOP STUD MOUNT 6
7 E205 Technical Characteristics Termination styles DIMENSIONS ARE IN MM (IN.) UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0,25 [.010] SOLDER PIN STYLE A: TIN PLATED STYLE B: SOLDER DIPPED 90 SOLDER PIN STYLE D: TIN PLATED STYLE E: SOLDER DIPPED 1,27±0,13 THICK SILICONE RUBBER.002] CONTRASTING SOLDER HOOK PLUG IN STYLE H: TIN PLATED STYLE M: GOLD PLATED WITH TIN STYLE J: SOLDER DIPPED PLATED POLARIZING PIN 7
8 E405 Technical Characteristics Coil characteristics DC COIL CODE A B D E F G H J Nominal coil voltage , Max pull in voltage at 25 C 3,3 6,5 13,5 13,5 16, ,7 55 Max pull in voltage at 125 C 4,5 9, Min hold voltage at 125 C 2,3 4,5 7,0 7,0 10,0 12,0 21,0 32 Min drop out voltage at -70 C 0,25 0,5 1,2 1,5 2,0 2,4 4,0 5,5 Coil resistance ( ohms ± 10% at 25 C ) Max coil transient suppression (where applicable) VDC OTHER VOLTAGES AVAILABLE FROM FACTORY ON REQUEST Circuit diagram D3 - X2 D2 D1 D3 - X2 D2 D1 C3 C2 C1 C3 C2 C1 B3 B2 B1 B3 B2 B1 A3 X1 A2 A1 A3 X1 A2 A1 E405 ES405 OPTIONAL INTERNAL VOLTAGE SUPPRESSOR 8
9 E405 Technical Characteristics Mounting styles DIMENSIONS ARE IN MM (IN.) UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0,25 [.010] STYLE 1 NO MOUNT STYLE 2 RAISED VERTICAL FLANGE MOUNT STYLE 3 HORIZONTAL FLANGE MOUNT 9
10 E405 Technical Characteristics Mounting styles [cont.] DIMENSIONS ARE IN MM (IN.) UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0,25 [.010] STYLE 8: M3 CAPTIVE SCREWS STYLE C: #4-40 UNC CAPTIVE SCREWS RAISED VERTICAL FLANGE MOUNT STYLE G RAISED VERTICAL FLANGE MOUNT WITH CAPTIVE HARDWARE 10
11 E405 Technical Characteristics Mounting Styles DIMENSIONS ARE IN MM (IN.) UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0,25 [.010] #4-40 UNC-2A [3 STUDS] [.810MAX] STYLE M R DIM "A" STYLE DIM "A" 9,5 [.375] T 9,5 [.375] 6,35 [.250] U 6,35 [.250] 11
12 E405 Technical Characteristics Termination Styles DIMENSIONS ARE IN MM (IN.) UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0,25 [.010] SOLDER PIN STYLE A: TIN PLATED STYLE B: SOLDER DIPPED PLUG IN STYLE M: GOLD PLATED SOLDER HOOK STYLE H: TIN PLATED STYLE J: SOLDER DIPPED 12
13 Track Mount General characteristics No. of poles Volume Mass E205 TRACK A E205 TRACK B 2 Form C (2PDT) 2 Form C (2PDT) 3.3 cm 3 [.2 in 3 ] 3.3 cm 3 [.2 in 3 ] 15.4 grams [.034 lb. Max] 20.4 grams [.045 lb. Max] Switching characteristics Operate 25 C Release 25 C Bounce time Mechanical Life Contact rating Environmental characteristics Temperature Range Type of load (High level) 5 ms max. 5 ms max. 5 ms max. 5 ms max. 1 ms max. 1 ms max. Cycles x ,000 cycles 28 Vdc -70 C to 125 C 115 Vac 400 Hz 1 phase 115/200 Vac 400 Hz 3 phase Resistive amps 5 amps 5 amps Inductive 20 3 amps 5 amps 5 amps Motor amps 3 amps 3 amps Lamp amps n/a n/a Overload current n/a 20 amps 30 amps 30 amps Rupture current n/a 25 amps 40 amps 40 amps Vibration (Sinusoidal) Track Mount A Track Mount B.06in DA HZ, 10 g Hz, 20 g Hz 30 g Hz Shock, any axis 200 g 6 ms Seal Hermetic (1 x 10-8 atm cm 3 /s) Electrical characteristics Contact voltage drop (@ Rated resistive load) - Initial 150 mv Max. - After guaranteed life 175 mv Max. -Max. leakage current: 100 microamperes rms. (Track Mount B) Dielectric sea level - 60 Hz Insulation Resistance - Initial - After life tests Reference Military Specifications Track Mount A Track Mount B Coil to Case All other points 1000 Vrms 1000 Vrms 1050 Vrms 1050 Vrms 100 Megohms 500 Vdc 50 Megohms 500 Vdc MIL-PRF
14 Track Mount Characteristics General characteristics No. of poles Volume Mass E405 TRACK A E405 TRACK B 4 Form C (4PDT) 4 Form C (4PDT) 6.9 cm 3 [.42 in 3 ] 6.9 cm 3 [.42 in 3 ] 26.4 grams [.058 lb. Max] 32.6 grams [.072 lb. Max] Switching characteristics Operate 25 C Release 25 C Bounce time Mechanical life Contact rating Environmental characteristics Temperature Range Vibration (Sinusoidal) Track Mount A Track Mount B Shock, any axis Type of load (High level) 6 ms max. 6 ms max. 6 ms max. 6 ms max. 1 ms max. 1 ms max. Cycles x ,000 cycles 28 Vdc -70 C to 125 C.06in DA Hz, 10 g Hz, 20 g Hz 30 g Hz 200 g 6 ms 115 Vac 400 Hz 1 phase 115/200 Vac 400 Hz 3 phase Resistive amps 5 amps 5 amps Inductive 20 3 amps 5 amps 5 amps Motor amps 3 amps 3 amps Lamp amps n/a n/a Overload current n/a 20 amps 30 amps 30 amps Rupture current n/a 25 amps 40 amps 40 amps Seal Hermetic (1 x 10-8 atm cm 3 /s) Electrical characteristics Contact voltage drop (@ Rated resistive load) - Initial 150 mv Max. - After guaranteed life 175 mv Max. - Max. leakage current: 100 microamperes (Track Mount B) Dielectric sea level - 60 Hz Insulation Resistance - Initial - After life tests Reference Military Specifications Track Mount A Track Mount B Coil to Case All other points 1000 Vrms 1000 Vrms 1050 Vrms 1050 Vrms 100 Megohms 500 Vdc 50 Megohms 500 Vdc MIL-PRF
15 Track Mount Part Numbering System E S 205 E 4 M D RELAY TYPE E Series OPTION S = Internal Voltage Suppressor MODEL 205: page 16 & : page 18 & 19 COIL CODE 205: page : page 18 MOUNTING STYLES 205: page : page 19 TERMINATION STYLES 205: page : page 19 Special instructions or specifications D FOR CATALOG STANDARD OR A FOR CATALOG STANDARD WITHOUT ARC BARRIERS XXXX FOR SPECIAL INSTRUCTIONS OR SPECIFICATIONS (ASSIGNED BY DRI) 15
16 E205 Track Mount Technical Characteristics Coil characteristics DC COIL CODE A B D E F G H J Nominal coil voltage , Maximum pick-up voltage at 25 C 3,3 6,5 13,5 13,5 16, ,7 50 Maximum pick-up voltage at 125 C 4, Maximum hold voltage at 125 C 2, Minimum drop-out voltage at -70 C 0,25 0,5 1,2 1,5 2 2,4 4 5,5 Coil resistance ( ohms ± 10% at 25 C ) Max coil transient suppression OTHER VOLTAGES AVAILABLE FROM FACTORY ON REQUEST Circuit diagram B3 - X2 B2 B1 B3 - X2 B2 B1 A3 X1 A2 A1 A3 X1 A2 A1 TRACK MOUNT A INTERNAL VOLTAGE SUPPRESSOR TRACK MOUNT B INTERNAL VOLTAGE SUPPRESSOR 16
17 E205 Track Mount Technical Characteristics Mounting & Terminal Styles DIMENSIONS ARE IN MM (IN.) UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0,25 [.010] 4,01 ± 0,08 [.158±.003] FROM SURFACE OF HEADER 2,03 ± 0,13 [.080±.005] 0,25 ± 0,13 RAD. [.010±.005] [.170] TRACK MOUNT A TERMINAL STYLE M (GOLD PLATED) MOUNTING STYLE 4 TRACK MOUNT B TERMINAL STYLE M (GOLD PLATED) MOUNTING STYLE 5 17
18 E405 Track Mount Technical Characteristics Coil characteristics DC E405 COIL CODE A B D E F G H J Nominal coil voltage , Max pick up voltage at 25 C 3,3 6,5 13,5 13,5 16, ,7 55 Max pick up voltage at 125 C 4,5 9, Max hold voltage at 125 C 2,3 4,5 7,0 7,0 10,0 12,0 21,0 32 Min drop out voltage at -70 C 0,25 0,5 1,2 1,5 2,0 2,4 4,0 5,5 Coil resistance ( ohms ± 10% at 25 C ) Max coil transient suppression OTHER VOLTAGES AVAILABLE FROM FACTORY ON REQUEST Track Mount Circuit diagram -X2 D -X2 D C GND C B2 B B2 B 3 X1 2 1 A 3 X1 2 1 A TRACK MOUNT A INTERNAL VOLTAGE SUPRESSOR TRACK MOUNT B INTERNAL VOLTAGE SUPRESSOR 18
19 E405 Track Mount Technical Characteristics Mounting & Terminal Styles DIMENSIONS ARE IN MM (IN.) UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±0,25 [.010] TRACK MOUNT A TERMINAL STYLE M (GOLD PLATED) MOUNTING STYLE 4 TRACK MOUNT B TERMINAL STYLE M (GOLD PLATED) MOUNTING STYLE 5 19
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
60 Series - General purpose relays 6-10 A. Features 60.12 60.13
Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing (certain relay/socket combinations)
AP/UP, AP/MIL Series. Magnetic Circuit Protectors
AP/UP, AP/MIL Series Magnetic Circuit Protectors Introduction Poles Configurations Operating Characteristics Delay Curves Specifications Decision Tables 71 72 75 76 77 78 79 AP/UP, AP/MIL Series Hydraulic
SMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES RF00 RF00D RF00DD RF0 RF0D RF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression Repeatable,
49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
RY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS FEATURES 28. 1.12 12..472 1.4.49 The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52
Features 40.31 40.51 40.52 1 & 2 Pole relay range 40.31-1 Pole 10 A (3.5 mm pin pitch) 40.51-1 Pole 10 A (5 mm pin pitch) 40.52-2 Pole 8 A (5 mm pin pitch) PCB mount - direct or via PCB socket 35 mm rail
SZR-LY Series. General Purpose Power Relay WARNING WARNING. Sensing and Control
Power Relay FEATURES Small package design ARC barrier equipped Silver Cadium Oxide contact High dielectric strength (,800 Vac) High reliability and long life Ultra-high sensitivity with quick response
RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
s RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules
CHIEF EN TERPRISES INC. M a s t e r I n t e r n a t i o n a l D i s t r i b u t o r Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules M AS TER IN
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
The Best Relaytion. Reed Relays. 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04
The Best Relaytion Reed Relays 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 1 and 2 pole relays non-polarized, non-latching Features Direct coil control with TTL-signals possible Highly reliable
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
FP2 Relay. The Best Relaytion
The Best Relaytion 2 pole telecom / signal relay Through Hole Type (THT) Polarized. Relay types: non-latching with1 coil latching with 1 coil latching with 2 coils Features Telecom / signal relay (dry
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
KSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
General-purpose Relay
General-purpose Relay An Improved Miniature Power Relay with Many Models for Sequence Control and Power Applications A wide range of relay variations including ones with operation indicators, high-capacity
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY SERIES RF121 RELAY TYPE RF Magnetic-Latching, SPDT, Through-hole Relay DESCRIPTION The ultraminiature RF121 relay is built on Teledyne
Reed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay
AXICOM AXICOM 108-98011 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not
LAUBE TECHNOLOGY DRY REED RELAYS
LAUBE TECHNOLOGY DRY REED RELAYS CONTACT FORM CURRENT PART SERIES PAGE #'S (1A) SPST-NO 1 AMP D41A...0L 147~148 (Link) (1A) SPST-NO 1 AMP D71A.1.0 149~150 (Link) (1A) SPST-NO 1 AMP F51A.100 151~152 (Link)
48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
MINIATURE SURFACE MOUNT RELAY
FTR-K1 SERIES MINIATURE SURFACE MOUNT RELAY 1 POLE - 25A (For Automotive Applications) FTR-P6 Series FEATURES Surface mount relays for automotive applications Miniature size (67% of the volume of FTR-P3
1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
Specifications for EM223 24 VDC 4 In/4 Out and EM223 24 VDC 4 In/4 Relay Out
SIMATIC S7-200 EM223 Digital Combination Modules EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out Table 1 Specifications for EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out EM223 2VDC In/Out 6ES7 2231BF200XA0
TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS
LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between
D7 Series Standard and Full Featured. Standard DPDT 24V AC 120V AC 240V AC 12V DC 24V DC 120V AC 110V DC 240V AC 6V AC 6V DC 12V AC 12V DC 24V AC
April 00 D Series Standard and Full Featured - Catalogue Number Structure Table -. D Series Catalogue Numbering System Family Type DPR = Standard Relay DPF = Full Featured Relay Contact Configuration =
NOT RECOMMENDED FOR NEW DESIGNS
28 Volt NOT RECOMMENDED FOR NEW DESIGNS Features Attenuation 0 db from 110 khz to 0 MHz Operating temperature - to +8 C Nominal 28 V input, 0 V to 0 V operation 1.7 to A throughput current Transient suppression
1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C
FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between
38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
PCB Relays Twin Relays
Powertrain Systems Chassis Systems Safety Security Body Driver Information Convenience Description Features - Two separate systems - Lamp applications - Extremely space saving double relay Typical applications
SKR - industry relay
SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time,
Selector Switch Type 08
Compact and versatile 2 positions multi wafer selector switch For PCB mounting 25,000 switching cycles with up to 9.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft
Ordering Information. Latching Relay G2AK. Model Number Legend G2AK-@@@@@ 1 2 3 4 5. Magnetic Latching Version of G2A Ideal for Sequence Control
Latching Relay CSM DS_E_4_1 Magnetic Latching Version of G2A Ideal for Sequence Control Double-winding latch system with continuous rating. Terminals pulled from the respective junctions between the built-in
SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
SPST-NO SPDT DPST-NO DPDT
PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0
Model Number Structure
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
3.0 CHARACTERISTICS. AR Auxiliary Relay High Speed, High Threshold 41-759.3C
41-759.3C the magnetic core upon energizing of the switch. When the switch closes, the moving contacts bridge two stationary contacts, completing the trip circuit. Also during this operation two fingers
NA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
Model Number Structure
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51
34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 0, RS 8 Zero switching AC Solid State Relay Direct copper bonding (DCB) technology in 25A and 0A types LED indication Clip-on IP 20 protection
Plug-in relays Mini ISO relays
Powertrain Systems Chassis Systems Safety Security Body Driver Information Convenience Description Features Limiting continuous current 70 A Dimensional characteristics and the functional allocation of
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
TF2 Series Miniature Snap-acting Switches
Miniature Snapacting Switches Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics
Type Contact material Contact form Construction Model General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay G2R Creepage distance of 8.0 mm (0.31) min. between coil and contact. Dual-winding latching type available. Plug-in and quick-connect terminals available. High sensitivity (360 mw) and
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
COMPACT POWER TWIN RELAY
FTR-K1 SERIES COMPACT POWER TWIN RELAY 1 POLE x 2-25A, H-Bridge (for automotive applications) FTR-P4 Series FEATURES Compact for high density packaging High contact capacity with proven contact material
2 POLES - 5A LOW PROFILE TYPE
FTR-K1 SERIES POWER RELAY 2 POLES - 5A LOW PROFILE TYPE FTR-F1 Series FEATURES Low profile (height: 16.5mm) DPST/DPDT 5A, TV-3 rating available High insulation (due to its reinforced insulation construction)
C ole s quality Open Frame Instrument Rotary Switch provides low
OPEN FRAME series C ole s quality Open Frame Instrument Rotary Switch provides low contact resistance (.005W), very high contact reliability, smooth action with positive positioning, precision design,
Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)
Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Pluggable interface relays CR-P Pcb relays
2CDC 293 034 F0004 1 2 4 3 Features 9 different supply s: DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2 c/o (8 A) Cadmium-free contact
Solid-State Timer H3G
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11000(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid-State Timer Low-Cost, Plug-In
G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm
Slim Plug-In Safety Relay Slim Safety Relay for Machine Control H Slim body only 13 x 24 x 50 mm (six poles) H Four-pole and six-pole models are available H Terminal arrangement simplifies PCB pattern
1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting
Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8
Relays & Sockets. RH Series Compact Power Relays. Part Number Selection
RH Key features SPDT through PDT, 0A contacts Compact power type relays Miniature power relays with a large capacity 0A contact capacity Compact size saves space Contact SPDT DPDT PDT PDT RH Series Compact
1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) High insulation Insulation distance (between coil and
Type Sealing Poles Contacts Rated voltage Model Standard d Flux-tight 4 poles oes 3PST-NO, SPST-NC 24 VDC G7SA-3A1B 3PST-NO, 3PST-NC
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
NEW! Typical Applications. Motor controls Thermostatics Portable tools Air Conditioner. Materials
TF2 Series Miniature Snapacting Switches NEW! Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor
D2SW-P. Sealed Subminiature Basic Switch. Ordering Information
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
Electromechanical Relays - Frequently Asked Questions
Electromechanical Relays - Frequently Asked Questions Q: What is the contact carry rating? A: Our EMR are capable of hot switching 28W load plus 100 cycles of overload condition at 56W. Therefore at a
Selector Switch Type 01
Selector Switch Type 0 Compact positions selector switch,000 switching cycles with up to.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft Optional IP front panel
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
Clear Glass Sensor. Ordering Information E3S-CR67/62. Optimum Sensor for Detecting Transparent Glass and Plastic Bottles
Clear Glass Sensor Optimum Sensor for Detecting Transparent Glass and Plastic Bottles E3S-CR67/62 Retroreflective Sensor smoothly detects 5-mm gaps. Detects transparent bottles that have a lens effect.
NPN Darlington Power Silicon Transistor Qualified per MIL-PRF-19500/472
and Available on commercial versions NPN Darlington Power Silicon Transistor Qualified per MIL-PRF-19500/472 DESCRIPTION Qualified Levels: JAN, JANTX, and JANTX This high speed NPN transistor is military
General Purpose Relays Types K, R, N, and C
General Purpose Relays s K, R, N, and C Catalog 0CT00R/0 00 Class 0 CONTENTS Description............................................. Page R Miniature Plug-in Relays.............................. K Plug-in
CMD Series. 4 Contact Row High Density Signal Connectors. Technical Characteristics
MD Series 4 ontact Row High Density Signal onnectors Offset-grid layout, four rows within dielectric connector body, mm center-to-center spacing in each row and row-to-row spacing. 0.6 mm nominal pin DI
POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES
POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and
1 POLE - 8A Medium Load Control
POWER RELAY 1 POLE - 8A Medium Load Control JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile and space saving - Height: 12.5 mm - Mounting
MAXIMUM LOAD CURRENT 1 A SN SERIES
SOLID STATE RELAY (I/O Module) MAXIMUM LOAD CURRENT 1 A SN SERIES RoHS compliant FEATURES I/O modules for interface between CPU and external input devices or loads Ultra slim and light weight, SIL s type
Elesta Elektrotechnik AG industry relays and accessories
Elesta Elektrotechnik AG industry relays and accessories edition 003 table of contents SKR-industry relay 4 SKR-screw socket with accessories 4 SFR-industry relay 6 SFR-screw socket with accessories 7
PRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors
PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2
POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting
1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
Micro Contactors. Micro Contactor Relays. Micro Contactors With Solder Pins. Coil voltages. Micro Reversing Contactor. Technical Data.
Micro Contactors Micro Contactor Relays 0 Micro Contactors Micro Contactors With Solder Pins Coil voltages Micro Reversing Contactor 3 Technical Data 4 Dimensions 8 9 Micro Contactor Relays 4pole C Operated
28 Volt Input - 40 Watt
Features Powers 28 volt dc-dc converters during power dropout Input voltage 12 to 40 volts Operating temperature -55 to +125 C Reduces hold-up capacitance by 80% Inhibit function Synchronization function
L304 LED PUSHBUTTON SWITCH / DISPLAY INDICATOR INDICATEUR LUMINEUX A LED / BOUTON POUSSOIR
MECHANICAL CHARACTERISTICS CARACTERISTIQUES MECANIQUE PRINCIPAL TECHNICAL CHARACTERISTICS CARACTERISTIQUES TECHNIQUES PRINCIPALES 3 possible versions - Single indicator - Momentary action pushbutton (1
(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII
Non-promotional not for new designs FTR-K1 SERIES POWER RELAY 1 POLE - 10A VS Series FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-5 is available Working class: C UL class B (130 C) coil wire insulation
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
MasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic
PA5. Series. Quick-Connect Cables with Connectors. Simplifies sensor wiring. Wide variety of connectors attached to cables.
Quick-Connect Cables with Connectors PA Simplifies sensor wiring. Wide variety of connectors attached to cables. Series No wiring or staking work needed Shorter replacement time in unlikely event of sensor
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
AC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant High
Goodsky Technical Data. Contact Details
Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RY SERIES FEATURES Ultra high sensitivity UL, CSA recognized Conforms to FCC rules and regulations Part 68 Surge strength 1,500 V High dielectric
DISCONTINUED (2012) VB SERIES 2 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 2 POLE 5 A (MEDIUM LOAD CONTROL) VB SERIES RoHS compliant FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-3 rated Working class: C UL class B (130 C) insulation Type of service: continuous
SUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original
SUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original A motor starter is a combination of devices to allow an induction motor to start, run and stop according
Features. Type List 832A
Type List Terminal style PCB terminal A Contact form 1B (SPNC) 1B (SPNC) Insulation eatures Heavy duty 30A general purpose Power Relays. UL/CUL (UL 508 & 873), VDE safety approvals. Optional for open frame,
Surface Mounting Relay
Surface Mounting Relay Surface Mounting Relay with the World s Smallest Mounting Area and a Height of Only 5.2 mm Subminiature model as small as 5.2 (H) x 6.5 (W) x 10 (L) mm is ideal for high-density
HV reed relays K-551H, K-552H K-553H, K-554H, K-555H, K-556H form A contact (normally open) for PCBs
50-5 Wrocław, ul. Krakowska 6, Poland tel. (+8) 7/-65-5, fax (+8) 7/-58-59 HV reed relays K-55H, K-55H K-55H, K-55H, K-555H, K-556H K-55H K-55H K-55H K-55H K-555H K-556H.CONTACT 0 Breakdown voltage min
Knob Potentiometer with Switch
Knob Potentiometer with Switch The is a revolutionary concept in panel mounted potentiometers. This unique design consists of a knob driving and incorporating a cermet potentiometer. Only the mounting
3. Terminal Shape P : PCB terminals FS: Surface-mounting terminals, short FL : Surface-mounting terminals, long
Surfacemounting Relay Ultracompact and Slim DPDT Relay Suitable for highdensity mounting.(.7 mm (W). mm (L) 9 mm (H)). Dielectric strength of, VAC and an impulse withstand voltage of 2, V for 2 μs (conforms