Elesta Elektrotechnik AG industry relays and accessories

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Elesta Elektrotechnik AG industry relays and accessories"

Transcription

1 Elesta Elektrotechnik AG industry relays and accessories edition 003

2 table of contents SKR-industry relay 4 SKR-screw socket with accessories 4 SFR-industry relay 6 SFR-screw socket with accessories 7 LR-power relay 8 FR-miniature relay 34 PR-PCB relay 4 MR-special relay 48 technical data has been fully checked, but accuracy of printed matter not guaranteed Catalog 00 e / 04.03

3 product range SKR line SFR line - industry relay - standard 0 A - plug-in relay -pole - plug-in relay 3-pole FR line - PCB version - double contact FR line socket - industry relay - standard 5 A - plug-in relay 4-pole LR line - miniature relay 4 A - PCB version PR line - matching FR line - power relay MR line - PCB relay 6 A - forcibly actuated - universal relay - soldering version - plug-in version 8-pole - plug-in version -pole - high impedance, sensitive coil catalog 00 e /

4 SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time, electrical and mechanical status indication as well as the unsurpassed construction from only six assemblies makes the relay to the excellent power switch. 8 adjustable functions and 8 selectable time ranges: these are the special features of the time module STM. With only one version of the module all essential features as operating voltage, functions and time ranges are adjustable. The result: a simple and cost-effective warehousing. Simple to handle screw-terminal and clear, rich in contrast labeled clamp identification, are the base for a problemles use. The ZKE/ZKX sockets permit a rapid and secure installation. The separated inputs and outputs are located at one level. There is also the possibility to plug a time module STM or other additional modules together with the SKR relay. features simple construction high contact load contact spring in Beryllium bronze safe wire diameter long life time large coil room electrical or mechanical status indication integrated manual actuation simple installation indelible scheme on socket or cover following international standards applications mostly used where a timedependent event must be headed switch panel making machine industry illuminations locking of functions gate control machine control 4 catalog 00 e / 04.03

5 type number key SKR 5 A... 04VDC coil voltage VDC = direct current VAC = alternating current standard voltage VAC: 04, 5, 30 V VDC: 04, 0 options D = double contact (AgCuNi) L = electrical position indication F = free wheel diode FL= free wheel diode and electrical position indication B = without manual actuation T = push-button actuation C = current coil relay version SKR 085 A SKR 5 A SKR A A = mechanical position indication standard: manual actuation order samples manual actuation position indication free wheel diode LED display SKR085 A VDC/AC SKR5 A VDC/AC SKR A VDC/AC SKR085 AF VDC SKR5 AF VDC SKR AF VDC SKR085 AL VDC/AC SKR5 AL VDC/AC SKR AL VDC/AC SKR085 AFL VDC SKR5 AFL VDC SKR AFL VDC catalog 00 e /

6 SKR085 - industry relay, 8-pole Industry relay with two change-over contacts in different versions. order numbers serial version SKR 085 A... VDC/AC with mechanical position indication contact specifications contact material contact type nominal switching capacity electric life expectancy inrush current max. switching current range switching power range AgCuNi single contact 50 VAC 0 A AC 500 VA 440 VAC 4 A AC app. 700'000 operations 50 VAC, 0 A, AC (360 operations/h) 40 A for 00 ms 50 ma to 0 A 0,3 VA(W) to 500 VA options general data electrical position indication SKR 085 L.. with free wheel diode SKR 085 F.. electrical position indication with free wheel diode SKR 085 FL.. double contact SKR 085 D.. without manual actuation SKR 085 B.. push-button actuation SKR 085 T.. current coil SKR 085 C.. (combinations with mechanical and electrical position indication and free-wheel diode are possible) mechanic life expectancy > 0 8 operations mechanical switching frequency 0 Hz pull-in time ms at DC / 3-0 ms at AC release time 3,5 ms at DC / -5 ms at AC bounce time normally open contact 3,5 ms at DC / 3-6 ms at AC bounce time break contact 9 ms at DC / 6- ms at AC shock resistance AK: > 0 g vibration resistance 0-55 Hz, AK: 0 g, RK: 3 g test voltage, coil/contact 500 Veff test voltage, open contact 500 Veff insulation resistance 0 Ohm weight app. 80 g installation situation any ambient temperature max. +70 C protection standard IP 40 accessories tests, instructions plug-in socket ZVE 8 ZKE 088 metal clamp ZKR 008 certificates insulation group UL, CSA, VDE VDE 00 / group C 50 VAC 6 catalog 00 e / 04.03

7 A 7 A 8 circuit diagram dimensions coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,6 0, /-0 4 9,, 50, / ,4,4 5, / ,0 5,5, 9'000 +/ ,0 7,58 9'000 +/-5 standard coils for alternated current (other voltages on enquiry) - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. VAC 9,6 0,6 3,3 +/-0 4 9,, / ,4, / ,0 5,5 3 '0 +/ ,0,0 4'450 +/ ,5,5 5'600 +/-0 catalog 00 e /

8 SKR5 - industry relay, -pole Industry relay with three changeover contacts in different versions order numbers serial version SKR 5 A... VDC/AC with mechanical position indication contact specifications contact material contact type nominal switching capacity electric life expectancy max. inrush current switching current range switching power range AgCuNi single contact 50 VAC 0 A AC 500 VA 440 VAC 4 A AC app. 700'000 operations 50 VAC, 0 A, AC (360 operations/h) 40 A for 00 ms 50 ma to 0 A 0,3 VA to 500 VA options general data electrical position indication SKR 5 L.. with free wheel diode SKR 5 F.. electrical position indication with free wheel diode SKR 5 FL.. double contact SKR 5 D.. without manual actuation SKR 5 B.. push-button actuation SKR 5 T.. current coil SKR 5 C.. (combinations with mechanical and electrical position indication and free-wheel diode are possible) mechanic life expectancy > 0 8 operations mechanical switching frequency 0 Hz pull-in time ms at DC / 3-0 ms at AC release time 3,5 ms at DC / -5 ms at AC bounce time normally open contact 3,5 ms at DC / 3-6 ms at AC bounce time break contact 9 ms at DC / 6- ms at AC shock resistance AK: > 0 g vibration resistance 0-55 Hz, AK: 0 g, RK: 3 g test voltage, coil/contact 500 Veff test voltage, open contact 500 Veff insulation resistance 0 Ohm weight app. 80 g installation situation any ambient temperature max. +70 C protection standard IP 40 accessories tests, instructions plug-in socket ZVE ZKE 8 ZKX 8 time module STM 00 metal clamp ZKR 008 certificates insulation group UL, CSA, VDE VDE 00 / group C 50 VAC 8 catalog 00 e / 04.03

9 A A 3 circuit diagram dimensions coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,6 0, /-0 4 9,, 50, / ,4,4 5, / ,0 5,5, 9'000 +/ ,0 7,58 9'000 +/-5 standard coils for alternated current (other voltages on enquiry) VAC 9,6 0,6 3,3 +/-0 4 9,, / ,4, / ,0 5,5 3 '0 +/ ,0,0 4'450 +/ ,5,5 5'600 +/-0 catalog 00 e /

10 SKR - industry relay, PCB version Industry relay with three changeover contacts in different versions order numbers serial version SKR A... VDC/AC with mechanical position indication contact specifications contact material contact type nominal switching capacity electric life expectancy max. inrush current switching current range switching power range AgCuNi single contact 50 VAC 0 A AC 500 VA 440 VAC 4 A AC app. 700'000 operations 50 VAC, 0 A, AC (360 operations/h) 40 A for 00 ms 50 ma to 0 A 0,3 VA to 500 VA options general data electrical position indication SKR L.. with free wheel diode SKR F.. electrical position indication with free wheel diode SKR FL.. double contact SKR D.. without manual actuation SKR B.. push-button actuation SKR T.. current coil SKR C.. (combinations with mechanical and electrical position indication and free-wheel diode are possible) mechanic life expectancy > 0 8 operations mechanical switching frequency 0 Hz pull-in time ms at DC / 3-0 ms at AC release time 3,5 ms at DC / -5 ms at AC bounce time normally open contact 3,5 ms at DC / 3-6 ms at AC bounce time break contact 9 ms at DC / 6- ms at AC shock resistance AK: > 0 g vibration resistance 0-55 Hz, AK: 0 g, RK: 3 g test voltage, coil/contact 500 Veff test voltage, open contact 500 Veff insulation resistance 0 Ohm weight app. 80 g installation situation any ambient temperature max. +70 C accessories tests, instructions PCB socket ZKR 003 metal clamp ZKR 008 certificates insulation group UL, CSA, VDE VDE 00 / group C 50 VAC 0 catalog 00 e / 04.03

11 6 48 7,6 30, ,08 5,08 7,6 0,6 0, ,3 ±0, 30,48 38,5 a b 5,4 3 circuit diagram 37 drilling plan (view on solder side) dimensions 35 5,4 0,6, x 0,8 coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,6 0, /-0 4 9,, 50, / ,4,4 5, / ,0 5,5, 9'000 +/ ,0 7,58 9'000 +/-5 standard coils for alternated current (other voltages on enquiry) VAC 9,6 0,6 3,3 +/-0 4 9,, / ,4, / ,0 5,5 3 '0 +/ ,0,0 4'450 +/ ,5,5 5'600 +/-0 catalog 00 e / 04.03

12 SKR-contact specifications AgCuNi single contact current (A) ,8 0,6 0,4 0,3 0, load limit curve for DC 0, voltage (VDC) ) inductive load, L/R 40 ms ) resitive load data valid for relay SKR 085 SKR 5 SKR contact material AgCuNi (Ag,88 Ni0,) contact type single contact nominal switching capacity 50 VAC 0 A AC 500 VA 440 VAC 4 A AC 600 VA electric life expectancy app. 700'000 operations 50 VAC 0 A AC (360 operations/h) max. inrush current 40 A for 0 ms switching current range 30 ma to 0 A switching power range 0,8 VA to 500 VA contact resistance 0 mω contact life time 8 7 number of operations A switching current (A) - AC load cos phi (AC) - 50 VAC 50 Hz 360 operations/h AgCuNi double contact current (A) ,8 0,6 0,4 0,3 0, load limit curve for DC 0, voltage (VDC) ) inductive load, L/R 40 ms ) resitive load data valid for relay contact material contact type nominal switching capacity electric life expectancy max. inrush current switching current range switching power range contact resistance SKR 085D SKR 5D SKR D AgCuNi (Ag,88 Ni0,) double contact 50 VAC 6 A AC 500 VA app. 50'000 operations 50 VAC 6 A AC (360 operations/h) 5 A für 0 ms 0 ma to 6 A 0,06 VA to 500 VA 0 mω contact life time 8 7 number of operations switching current (A) - AC load cos phi (AC) - 50 VAC 50 Hz 360 operations/h catalog 00 e / 04.03

13 ZKR-PCB socket with accessories ZKR 003 matching to SKR order numbers ZKR 003 general data nominal data max. 0 A 400 V test voltage 000 Veff contact spring material Ms improved fixing soldering pin x M3 creeping resistance CTI 50 weight app. 7 g installation situation any ambient temperature -40 to +85 C number of poles -pole protection standard IP 30 accessories tests, instructions metal clamp ZKR 008 certificates insulation group UL, CSA VDE 00 / group C 50 VAC dimensions drilling plan 0,6 0,6 3,5,0x0,3 37 5,4 38,5,5 /,54,3 5,4 37 7,6 5,08 30,48 38,5 view from solder side catalog 00 e /

14 SKR-screw socket with accessories socket ZVE8 ZKE088 data nominal data 400 VAC 0 A 400 VAC 0 A dimensions (L x B x H) [mm] 57 x 38 x 8,5 75 x 38 x 6 ambient temperature [ C] -40 to to +85 accessories plug-in modules E... time module STM 00 metal clamp ZKR008 ZKR008 ZVE ZKX8 ZKE8 data nominal data 400 VAC 0 A 400 VAC 0 A 400 VAC 0 A dimensions (L x B x H) [mm] 57 x 38 x 8,5 6 x 38 x 6 75 x 38 x 6 ambient temperature [ C] -40 to to to +85 accessories plug-in modules E... time modules STM 00 metal clamp ZKR008 ZKR008 ZKR008 tests, instructions certificates insulation group UL, CSA VDE 00 / group C 50 VAC 4 catalog 00 e / 04.03

15 time modules STM 00 data compatible to socket function time range rated voltage ZKE088/8 programmable 0,05s - 40h 4-40 VDC/VAC general data time range 8 ranges: s, 0s, m, 0m, h, 0h, d, 0d time adjustment variable, 5% - 00% of the time range time function 8 functions, selectable by DIP switches display green LED for ON-status, blinking at time delay dimensions B x H x T = 35 x 46,7 x 0,3 mm (without clamp) weight app. 4 g permissible ambient temperature -5 to +55 C nominal voltage 4V to 40V AC (-5%...+0%), 4V to 50V DC (-5%...+0%) frequency 48 Hz to 63 Hz max. power consumption 4V AC/DC: 70mW, 40V AC/DC: 700mW min. impulse time (B) AC: 50ms, DC: 30 ms min. pause time (B) AC&DC: 00ms at 5 C, AC&DC: 40ms at 55 C pull-in delay AC: max. 40ms, DC: 0ms reset time delay AC&DC: max. 00ms at 5 C, AC&DC: max. 40ms at 55 C control voltage 4V: min. 80% of supply voltage 30V: min. 95% of supply voltage time delay after power loss max. 0ms start-up time 60ms re-readiness time max. 00ms at 5 C, max. 50ms at 55 C reset at UN 0Veff precision at the scale stops ±0,5% repeatability <0,5% or 5ms (in % from scale value) accuracy in adjustment 5% temperature influence 0,0% / C voltage influence 0,00% / V max. load current 00mA at 5 C plug-in modules E... data compatible to socket ZKE088/8 free wheel diode 6-0 VDC E RC-circuit 0-30 VAC E 5C varistor 6-4 VAC E 7 varistor 6-30 VAC E 8 LED 4-60 VDC/ VAC E 6EV LED 0-30 VDC/ VAC E 9V catalog 00 e /

16 SFR - industry relay the SFR-industry relay SFR industry relays are the ideal relays for control systems. A simple construction guarantees the safety of these relays. The large contact rivet (ø 3 mm) guarantees the extraordinary life time. An ideal product for control systems in combination with the socket program and the accessories. features large contacts (ø 3 mm) extraordinary life time mechanical lever integrated in the cover large separating walls between the contacts guarantees high creeping and leakage distance mechanical position indication complete accessory all relays are 00% computer tested applications switch panel making machine and plant industry switching between functions 6 catalog 00 e / 04.03

17 type number key SFR 43 A 04VDC coil voltages 04 VAC 04 VDC 5 VAC 0 VDC 30 VAC (other voltage ranges on enquiry) option A = mechanical position indication F = free wheel diode L = electrical position indication relay version SFR 4/08 PCB version SFR 43/083 plug-in version standard: manual actuation order samples manual actuation position indication free wheel diode LED display SFR08 A VDC/AC SFR 4 A VDC/AC SFR 083 A VDC/AC SFR 43 A VDC/AC SFR08 AF VDC SFR 4 AF VDC SFR 083 AF VDC SFR 43 AF VDC SFR08 AL VDC/AC SFR 4 AL VDC/AC SFR 083 AL VDC/AC SFR 43 AL VDC/AC SFR08 AFL VDC SFR 4 AFL VDC SFR 083 AFL VDC SFR 43 AFL VDC catalog 00 e /

18 SFR - Industry relay, 4-pole number of contacts switching current range inrush current specialities 4 WK 50 ma to 5 A 5 A mechanical position indication mechanical actuation with lever order numbers SFR 43 A..VDC/AC contact specifications contact material contact type nominal switching capacity electric life expectancy max. inrush current switching current range switching power range AgCuNi single contact 50 VAC 5 A AC 50 VA 440 VAC 4 A AC app. 00'000 operations 50 VAC, 5 A, AC (360 operations/h) 5 A for 0 ms 50 ma to 5 A 0,3 VA to 760 VA option general data electrical position indication SFR 43 AL..VDC/AC... mechanic life expectancy 0 x 0 6 operations mechanical switching frequency 0 Hz pull-in time 8 ms at DC / 3-9 ms at AC release time 3,5 ms at DC / 4- ms at AC bounce time normally open contact 3,0 ms at DC / -8 ms at AC bounce time break contact 8 ms at DC / 9-6 ms at AC shock resistance AK: > 0 g test voltage, coil/contact 000 Veff test voltage, set of contacts/set of contacts 000 Veff test voltage, open contact 000 Veff insulation resistance 50 MΩ creeping resistance CTI 50 weight app. 34 g installation situation any ambient temperature -40 to +70 C protection standard IP 40 accessories tests, instructions screw socket ES5/4N certificates insulation group VDE VDE 00 / group C 50 VAC 8 catalog 00 e / 04.03

19 circuit diagram dimensions 8,7 0,5 35 3,4 0,5 4,55 7,4 = = = 4,05 3,65 3, 3,65 6,35 6,35 coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,0 0,6 70, /-0 4 8,0, 37, 645 +/ ,0,4 8,46 '600 +/-0 0 8,5 5,5 8,33 3'00 +/-5 standard coils for alternated current (other voltages on enquiry) VAC 9,0,8 05,3 39 +/-0 4 8,0 3,6 5,6 65 +/ ,0 7, 6, /-0 0 8,5 6,5,9 3'500 +/ ,5 34,5 5,9 5'000 +/-5 catalog 00 e /

20 SFR - industry relay, -pole number of contacts switching current range inrush current specialities WK 50 ma to 5 A 5 A mechanical position indication mechanical actuation with lever order numbers SFR 083 A..VDC/AC contact specifications contact material contact type nominal switching capacitiy electric life expectancy max. inrush current switching current range switching power range AgCuNi single contact 50 VAC 5 A AC 50 VA 440 VAC 4 A AC app. 00'000 operations 50 VAC, 5 A, AC (360 operations/h) 5 A for 0 ms 50 ma to 5 A 0,3 VA to 760 VA options general data electrical position indication SFR 083 AL..VDC/AC... mechanic life expectancy 0 x 0 6 operations mechanical switching frequency 0 Hz pull-in time 8 ms at DC / 3-9 ms at AC release time 3,5 ms at DC / 4- ms at AC bounce time normally open contact 3,0 ms at DC / -8 ms at AC bounce time break contact 8 ms at DC / 9-6 ms at AC shock resistance AK: > 0 g test voltage, coil/contact 000 Veff test voltage, set of contacts/set of contacts 000 Veff test voltage, open contact 000 Veff insulation resistance 50 MΩ creeping resistance CTI 50 weight app. 34 g installation situation any ambient temperature -40 to +70 C protection standard IP 40 accessories tests, instructions screw socket ES5/ certificates insultions group VDE VDE 00 / group C 50 VAC 0 catalog 00 e / 04.03

21 circuit diagram dimensions 8,7 0,5 35 3,4 0,5 4,55 7,4 3,65 3, 3,65 4,05 6,35 6,35 coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,0 0,6 70, /-0 4 8,0, 37, 645 +/ ,0,4 8,46 '600 +/-0 0 8,5 5,5 8,33 3'00 +/-5 standard coils for alternated current (other voltages on enquiry) VAC 9,0,8 05,3 39 +/-0 4 8,0 3,6 5,6 65 +/ ,0 7, 6, /-0 0 8,5 6,5,9 3'500 +/ ,5 34,5 5,9 5'000 +/-5 catalog 00 e / 04.03

22 SFR - industry relay, PCB version number of contacts 4 WK switching current range 50 ma bis 5 A inrush current 5 A specialities mechanical position indication mechanical actuation with lever order numbers SFR 4 A..VDC/AC contact specifications contact material contact type nominal switching capacitiy electric life expectancy max. inrush current switching current range switching power range AgCuNi single contact 50 VAC 5 A AC 50 VA 440 VAC 4 A AC app. 00'000 operations 50 VAC, 5 A, AC (360 operations/h) 5 A for 0 ms 50 ma to 5 A 0,3 VA to 760 VA options general data electrical position indication SFR 4 AL..VDC/AC... mechanic life expectancy 0 x 0 6 operations mechanical switching frequency 0 Hz pull-in time 8 ms at DC / 3-9 ms at AC release time 3,5 ms at DC / 4- ms at AC bounce time normally open contact 3,0 ms at DC / -8 ms at AC bounce time break contact 8 ms at DC / 9-6 ms at AC shock resistance AK: > 0 g test voltage, coil/contact 000 Veff test voltage, set of contacts/set of contacts 000 Veff test voltage, open contact 000 Veff insulation resistance 50 MΩ creeping resistance CTI 50 weight app. 34 g installation situation any ambient temperature -40 to +70 C protection standard IP 40 tests, instructions certificates insultions group VDE VDE 00 / group C 50 VAC catalog 00 e / 04.03

23 circuit diagram dimensions drilling plan 8,7 0,5 35 3,4 0,5 4,55 7,4 = = = 4,05 3,65 3, 3,65 6,35 6,35 coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,0 0,6 70, /-0 4 8,0, 37, 645 +/ ,0,4 8,46 '600 +/-0 0 8,5 5,5 8,33 3'00 +/-5 standard coils for alternated current (other voltages on enquiry) VAC 9,0,8 05,3 39 +/-0 4 8,0 3,6 5,6 65 +/ ,0 7, 6, /-0 0 8,5 6,5,9 3'500 +/ ,5 34,5 5,9 5'000 +/-5 catalog 00 e /

24 SFR - industry relay, PCB version number of contacts WK switching current range 50 ma bis 5 A inrush current 5 A specialities mechanical position indication mechanical actuation with lever order numbers SFR 08 A..VDC/AC contact specifications contact material contact type nominal switching capacitiy electric life expectancy max. inrush current switching current range switching power range AgCuNi single contact 50 VAC 5 A AC 50 VA 440 VAC 4 A AC app. 00'000 operations 50 VAC, 5 A, AC (360 operations/h) 5 A for 0 ms 50 ma to 5 A 0,3 VA to 760 VA options general data electrical position indication SFR 08 AL..VDC/AC... mechanic life expectancy 0 x 0 6 operations mechanical switching frequency 0 Hz pull-in time 8 ms at DC / 3-9 ms at AC release time 3,5 ms at DC / 4- ms at AC bounce time normally open contact 3,0 ms at DC / -8 ms at AC bounce time break contact 8 ms at DC / 9-6 ms at AC shock resistance AK: > 0 g test voltage, coil/contact 000 Veff test voltage, set of contacts/set of contacts 000 Veff test voltage, open contact 000 Veff insulation resistance 50 MΩ creeping resistance CTI 50 weight app. 34 g installation situation any ambient temperature -40 to +70 C protection standard IP 40 tests, instructions certificates insultions group VDE VDE 00 / group C 50 VAC 4 catalog 00 e / 04.03

25 circuit diagram dimensions drilling plan 8,7 0,5 35 3,4 0,5 4,55 7,4 3,65 3, 3,65 4,05 6,35 6,35 coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,0 0,6 70, /-0 4 8,0, 37, 645 +/ ,0,4 8,46 '600 +/-0 0 8,5 5,5 8,33 3'00 +/-5 standard coils for alternated current (other voltages on enquiry) VAC 9,0,8 05,3 39 +/-0 4 8,0 3,6 5,6 65 +/ ,0 7, 6, /-0 0 8,5 6,5,9 3'500 +/ ,5 34,5 5,9 5'000 +/-5 catalog 00 e /

26 SFR - contact specifications AgCuNi single contact current (A) ,8 0,6 0,4 0,3 0, load limit curve for DC resitive load 0, voltage (VDC) data valid for relay SFR 43 contact material AgCuNi (Ag,88 Ni0,) contact type single contact nominal switching capacity 50 VAC 5 A AC 50 VA 440 VAC 4 A AC electric life expectancy app. 00'000 operations 50 VAC 5 A AC (360 operations/h) inrush current max. 5 A for 0 ms switching current range 50 ma to 5 A switching power range 0,3 VA to 500 VA contact resistance 0 mω contact life time 8 7 number of operations switching current (A) - AC-load cos phi (AC) - 50 VAC 50 Hz 360 operations/h 6 catalog 00 e / 04.03

27 SFR - screw socket with accessories socket ES5/4N data nominal data 300 VAC A dimensions (L x B x H) [mm] 66 x 9,5 x 9 ambient temperature [ C] -40 to +85 accessories plug-in modules metal clamp plastic clamp E... Clip MHO Clip MS35 plug-in modules E... data compatible to socket ES5/4N free wheel diode 30 VDC E RC-circuit 40 VAC E5C LED 4-60 VAC/DC E6EV LED 0-30 VAC/DC E9V catalog 00 e /

28 LR-power relay the power relay LR LR relays are power relays which convince by her brilliant simplicity. The mature and simple construction will predestine this relay for the rough and uncompromising use. By using best materials and because of the simple construction a max. mechanical and electrical life time was achieved. The special advantages of this mature relay lie in the high switching power as well as in the low power consumption of the coil. The LR relay is available in AC- and also in DC- version features applications simple construction high switching power low coil power extraordinary life time DIN rail mountable switching of short-circuit runner engines radiators in household appliance radiators in electromechanical ovens 8 catalog 00 e / 04.03

29 type number key LR 04 VDC coil voltage VDC = direct current VAC = alternating current standard voltage VAC: 04, 30 V VDC: 04, 0 relay version LR order sample LR 30 VAC - 3 normally open contacts - coil voltage 30 VAC - AMP connections - DIN-rail installation catalog 00 e /

30 LR - power relay Power relays especially for switching high AC- loads. order numbers contact specifications (see data sheet for curves) serial version LR 0 VAC LR 4 VDC contact material contact type nominal switching capacity electric life expectancy inrush current max. switching current range switching power range AgCdO single contact 50 VAC 0A AC 5000 VA 400 VAC 5A AC app. 900'000 operations 50 VAC 0A AC (360 Schaltung/h) 50A for 00 ms 500mA to 0A 8VA(W) to 5000VA general data max. switching frequency mechanical 5 mechanic life expectancy 0 Mio. pull-in time 3 ms (VDC) /6-4 ms (VAC) release time,5 ms (VDC) /3- ms (VAC) bounce time ms (VDC) /3-8 ms (VAC) shock resistance AK: 0 g test voltage, coil/contact 500 Veff test voltage, open contact 500 Veff insulation resistance >0 Ohm weight 0 g installation situation any ambient temperature max. +60 C tests, instructions certificates insulation group CSA, VDE VDE 00 / group C 50 VAC 30 catalog 00 e / 04.03

31 a a b 5 6 b 5 circuit diagram AMP connection side dimensions 0 6 4,5 0,8x6, ø 4,5 coil specifications UB UN energizing voltage range 3,0,5,0,5,0 0,5 standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9 0, /-0 4 8, 58,5 40 +/ ,4 30,0 '600 +/-0 0 8,5 5,5 3,8 8'000 +/ ambient temperature C DC-relay AC-relay - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. standard coils for alternated current (other voltages on enquiry) VAC 0, 0, /-0 4 0,4, / ,8, / ,5 5, / '900 +/-0 catalog 00 e /

32 LR - contact specifications AgCdO Ι [A] ,8 0,6 0,4 0,3 0, max. DC breaking capacity 0, voltage [V] U = data valid for relay contact material contact type nominal switching capacity electric life expectancy inrush current max. switching current range switching power range LR AgCdO single contact 50VAC 0A AC 5000VA 400VAC 5A AC app. 900'000 operations 50 VAC 0A AC (360 Schaltung/h) 50A for 00 ms 500mA to 0A 8VA(W) to 5000VA(W) indicutive load L/R = 40 ms resitive load contact life time for AC-load cos ϕ = number of operations AC-load [A] Ι : for 0 VAC (-phase) - I < 0 A, max. 360 operations/h - I > 0 A, max. 80 operations/h : for 3 x 380 VAC (3-phase, star- or triangle circuit) - I < 0 A, max. 360 operations/h - I > 0 A, max. 80 operations/h 3 catalog 00 e / 04.03

33 catalog 00 e /

34 FR - miniature relay the FR-miniature relay FR relays are available with three or four change-over contacts. They are used as fail-save elements in industrial electronics, automation and control. features large product range simple, robust construction high switching power extraordinary life time high contact force flexible installation contact spring in Beryllium bronze applications devices of automation and control 34 catalog 00 e / 04.03

35 type number key FR P 04 VDC... options switching current: contact material: 4A AgCuNi (4A) AgCuNi+Au4-6µm coil voltage VDC = direct current VAC = alternating current standard voltage VAC: 04, 0, 30 V VDC: 04, 0 PCB version relay version FR FR 4 order samples FR P 04 VDC 4A - 3 change-over contacts - PCB version - coil voltage 4VDC - nominal switching current 4 A FR 4 P 30 VAC 4A - 4 change-over contacts - PCB version - coil voltage 30VAC - nominal switching current 4A catalog 00 e /

36 FR P - miniature relay Miniaturised PCB-relay with three change-over contacts for industrial electronics. order numbers contact specifications (see data sheet for curves) PCB version FRP..VDC/VAC contact material contact type nominal switching capacity electric life expectancy inrush current max. switching current range switching power range AgCuNi single contact 50 VAC 4 A AC 500 VA app. 50'000 operations 50 VAC A AC (360 Schaltung/h) 5A for 00 ms 50 ma to A 0,3VA(W) to 500VA options general data contact material AgCuNi AgCuNi+Au0µm (see data sheet for contacts) mechanic life expectancy > 50 x 0 6 operations mechanical switching frequency 0 Hz pull-in time 8 ms at DC / 3-9 ms at AC release time,5 ms at DC / 4- ms at AC bounce time normally open contact 3 ms at DC / -8 ms at AC bounce time break contact 8 ms at DC / 3-6 ms at AC shock resistance AK: >0 g test voltage, coil/contact '000 Veff test voltage, open contact '000 Veff insulation resistance 50 MΩ weight 35 g installation situation any ambient temperature max. +60 C accessories tests, instructions PCB socket ZB 87 metal clamp ZFR004 certificates UL, CSA, VDE 36 catalog 00 e / 04.03

37 5, 8 34,8 3 FR P FR P ,3 5, 5, 8, 3 7 5,5 circuit diagram drilling plan (view on solder side) dimensions FR P 9 0,5 7 8, 5,5, 7 5,5,0x0,5 coil specifications standard coils for direct current (other voltages on enquiry) standard coils for alternated current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 0, 0,6 8,7 45 +/-0 4 0,4, 4, / ,6,8 6,6 '350 +/ ,8,4,8 '00 +/ ,5 5,5,5 9'500 +/-5 VAC 0, 0, /-0 4 0,4, 5,6 65 +/ ,6,8 3, / ,8,4 6, / ,5 5,5,9 3'500 +/ ,0 6, 4'500 +/ ,5 5,8 5'000 +/-5 catalog 00 e /

38 FR 4P - miniature relay Miniaturised PCB-relay with three change-over contacts for industrial electronics. order numbers contact specifications (see data sheet for curves) PCB version FR4P..VDC/VAC contact material contact type nominal switching capacity electric life expectancy inrush current max. switching current range switching power range AgCuNi single contact 50 VAC 4 A AC 000 VA app. 00'000 operations 50 VAC 4A AC (360 operations/h) 5A for 00 ms 50 ma to 4A 0,3VA to 000VA options general data contact material AgCuNi AgCuNi+Au0µm (see data sheet for contacts) mechanic life expectancy > 50 x 0 6 operations switching frequency mechanical 0 Hz pull-in time 8 ms at DC / 3-9 ms at AC release time,5 ms at DC / 4- ms at AC bounce time normally open contact 3 ms at DC / -8 ms at AC bounce time break contact 8 ms at DC / 3-6 ms at AC shock resistance AK: >0 g test voltage, coil/contact '000 Veff test voltage, open contact '000 Veff insulation resistance 50 MΩ weight 38 g installation situation any ambient temperature max. +60 C accessories tests, instructions PCB socket ZB 07 metal clamp ZFR004 certificates UL, CSA, VDE 38 catalog 00 e / 04.03

39 5, 8 34,8 3 FR 4P FR 4P ,3 5, 5, 8, 3 4 5,5 7 5,5 circuit diagram drilling plan (view on solder side) dimensions 9 FR 4P 6 7 8, 5,5,,0x0,5 5,5 7 5,5 coil specifications standard coils for direct current (other voltages on enquiry) standard coils for alternated current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 0, 0, /-0 4 0,4, 5, 460 +/ ,6,8 36,0 '000 +/ ,8,4 8, '700 +/ ,5 5,5,5 9'500 +/-5 VAC 0, 0, /-0 4 0,4, 68,5 30 +/ ,6,8 46, / ,8,4 35, / ,5 5,5 6, / ,0 6, 4'500 +/ ,5 5,8 5'000 +/-5 catalog 00 e /

40 FR - contact specifications AgCuNi 4A Ι [A] load limit curve for DC Imax=4A data valid for relay FR FR 4 contact material AgCuNi (AgCu,88 Ni0,) contact type single contact nominal switching capacity 50VAC 4A AC 000VA electric life expectancy app. 00'000 operations 50 VAC 4A AC (360 operations/h) inrush current max. 5A for 00 ms switching current range 50mA to 4A switching power range 0,3VA to 000VA U [V=] - resitive load AgCuNi+Au 0µm Ι [A] load limit curve for DC Imax=4A data valid for relay FR FR 4 contact material AgCuNi+Au 0µm contact type single contact nominal switching capacity 50VAC A AC 500VA electric life expectancy app. 00'000 operations 50 VAC A AC (360 operations/h) inrush current max. 6A for 00 ms switching current range 0mA to A switching power range 0,06VA to 500VA U [V=] - resitive load 40 catalog 00 e / 04.03

41 catalog 00 e /

42 PR - PCB relay the PR-PCB relay PCB-Relay from the PR family are small relays. The version has forced guided contacts, normally open contacts, normally closed contacts. In the industrial electronic as well as in the control industry they are used as fail-save elements. The forced guided contact version are often used in control systems of high safe applications. By using best materials and because of the simple construction the highest failsecurity was achieved. High precision in mechanical and electrical control guarantees the high and stable quality of the relays. features applications simple fail-save construction high switching power high load current extraordinary life time high contact force security distance according to VDE and CSA minimal dimensions the forced guided contact version, SUVA approved. devices of automation and control 4 catalog 00 e / 04.03

43 type number key PR VDC coil voltage VDC = direct current standard voltage VDC: 04, 0 option F = flat version H = tall version relay version PR 4 (forced guided contacts) order sample PR 4 F 04 VDC - PCB-relay with forced guided contacts - flat version - coil voltage 4 VDC catalog 00 e /

44 PR 4F - PCB relay PCB-relay with forced guided contacts, flat version with normally open contacts, and normally closed contacts order numbers contact specifications (see data sheet for curves) serial version PR 4F.. VDC contact material contact type nominal switching capacity electric life expectancy inrush current switching current range switching power range AgCuNi single contact 50 VAC 6 A AC 500 VA app. 00'000 operations 50 VAC 6A AC (360 Schaltung/h) 5 A for 00 ms 50 ma to 6A 0,3VA to 500VA general data mechanic life expectancy > 0 x 0 6 operations mechanical switching frequency 0 Hz pull-in time 0 ms release time,5 ms bounce time normally open contact 6 ms bounce time break contact 6 ms test voltage, coil/contact '000 Veff / 50 Hz test voltage, open contact '500 Veff insulation resistance x0 Ohm weight 30 g installation situation any ambient temperature max. +60 C tests, instructions certificates CSA, VDE, SUVA 44 catalog 00 e / 04.03

45 3,0 45,,5 36,4 7,9 7x,54 3,0 5,08 ø,3 mm ± 0, 0,3 circuit diagram (view from the top) drilling plan (view on solder side) dimensions 45, 36,4, x0, 5,08,5 0,3 7x,54 7,9 3,0 coil specifications standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 6 5, 0,3 7 +/-0 0, 0, /-0 4 0,4, 54, / ,8,4 30 '600 +/ ,5 5,5 0,3 0'600 +/-3 catalog 00 e /

46 PR 4H - PCB relay PCB-relay with forced guided contacts, tall version with normally open contacts, and normally closed contacts order numbers contact specifications (see data sheet for curves) serial version PR4H.. VDC contact material contact type nominal switching capacity electric life expectancy inrush current max. switching current range switching power range AgCuNi single contact 50 VAC 6 A AC 500 VA app. 00'000 operations 50 VAC 6A AC (360 operations/h) 5 A for 00 ms 50 ma to 6A 0,3VA to 500VA general data mechanic life expectancy > 0 x 0 6 operations mechanical switching frequency 0 Hz pull-in time 0 ms release time,5 ms bounce time normally open contact 6 ms bounce time break contact 6 ms test voltage, coil/contact '000 Veff / 50 Hz test voltage, open contact '500 Veff insulation resistance x0 Ohm weight 30 g installation situation any ambient temperature max. +60 C tests, instructions certificates CSA, VDE, SUVA 46 catalog 00 e / 04.03

47 ø,3 mm ± 0, 7,6 3,3 7x,54 0,3 45,5,9,9 circuit diagram (view from the top) drilling plan (view on solder side) dimensions 36,,9 0,3 7x,54 45,5 x0,,9 7,6 3,3 3,0 coil specifications standard coils for direct current (other voltages on enquiry) rated min. pull-in release nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 6 5, 0,3 7 +/-0 0, 0, /-0 4 0,4, 54, / ,8,4 30 '600 +/ ,5 5,5 0,3 0'600 +/-3 contact specifications (AgCuNi 6A single contact) current (A) ,8 0,6 0,4 0,3 0, DC breaking capacity 0, voltage (VDC) ) inductive load, L/R 40 ms ) resitive load data valid for relay contact material contact type nominal switching capacity electric life expectancy inrush current max. switching current range* switching power range* contact resistance *typical values PR 4F PR 4H AgCuNi (AgCu,8Ni0,) single contact 50VAC 6A AC 500VA app. 00'000 operations 50 VAC 6A AC (360 operations/h) 5A for 00 ms 50mA to 6A 0,3VA(W) to 500VA(W) 0mΩ in the new condition catalog 00 e /

48 MR - special relay the special relay MR MR relays are fail-save and universal useable elements with excellent contact load and high pull-in sensitivity. The big bobbin and the variability of the contacts make a lot of versions for different applications possible. features different versions enable the ideal adaption for different applications. short contact springs enable bounce-free switching. special synthetic layers and a substantial over-travel are the reasons for the constancy and safety at a large number of operations, also in bad climate conditions. applications industrial electronics automation and control 48 catalog 00 e / 04.03

49 Special relays with different contact versions for several applications. order numbers soldering version MRL... VDC/ VAC plug-in version 8-pole MR8...VDC/ VAC plug-in version 4-pole MR...VDC/ VAC contact specifications contact material contact type nominal switching capacity electric life expectancy inrush current max. switching current range (see data sheet for curves) AgCuNi single contact 50 VAC 6 A AC 500 VA dependence of the version 5 A for 0 ms 50 ma to 6A options general data contact material AgCuNi contact versions up to 6 pairs optionally mechanic life expectancy > 50 x 0 6 operations mechanical switching frequency 0 Hz pull-in time 0-30 ms release time 6-8 ms test voltage, coil/contact '000 Veff test voltage, open contact '000 Veff weight dependence of the version installation situation dependence of the version ambient temperature max. +60 C accessories coil specifications socket 8-pole ZKR 088 socket 4-pole ZB 35 metal clamp MR8 ZFR 00 metal clamp MR4 ZFR 003 standard coils for direct current: standard coils for alternated current: VDC 3-40 VAC catalog 00 e /

50 50 catalog 00 e / notes

51 catalog 00 e /

52 Elesta Elektrotechnik AG CH-730 Bad Ragaz Telefon ++4(0) Elestastrasse 6 Telefax ++4(0) catalog 00 e / 04.03

SKR - industry relay

SKR - industry relay SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time,

More information

RY2 miniature industrial relays

RY2 miniature industrial relays 6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,

More information

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils

More information

Product Catalogue. Relays with forcibly guided contacts

Product Catalogue. Relays with forcibly guided contacts Product Catalogue Relays with forcibly guided contacts Product Catalogue - Relays with forcibly guided contacts Edition / Publisher: ELESTA relays GmbH, Bad Ragaz, Switzerland All rights reserved. This

More information

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.

48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0. 48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A

38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical

More information

48 SERIES Relay interface modules 10 A

48 SERIES Relay interface modules 10 A 48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply

More information

40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52

40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52 Features 40.31 40.51 40.52 1 & 2 Pole relay range 40.31-1 Pole 10 A (3.5 mm pin pitch) 40.51-1 Pole 10 A (5 mm pin pitch) 40.52-2 Pole 8 A (5 mm pin pitch) PCB mount - direct or via PCB socket 35 mm rail

More information

Model Number Structure

Model Number Structure General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with

More information

General Purpose Relays Accessories. Accessories Miniature Relay PT

General Purpose Relays Accessories. Accessories Miniature Relay PT Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n

More information

PCB Relay. LED indicator G2R-1A3-SN G2R-13-SN --- --- contact) LED indicator and diode DC G2R-1A3-SND G2R-13-SND --- ---

PCB Relay. LED indicator G2R-1A3-SN G2R-13-SN --- --- contact) LED indicator and diode DC G2R-1A3-SND G2R-13-SND --- --- PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE045 (VDE approval: C2 insulation grade), UL8, CSA22.2, SEV, SEMKO. Meets VDE0700 requirements for household products

More information

HERZ-Thermal Actuators

HERZ-Thermal Actuators HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01

More information

49 Series - Relay interface modules 8-10 - 16 A. Features

49 Series - Relay interface modules 8-10 - 16 A. Features Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole

More information

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51

34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51 34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in

More information

Model Number Structure

Model Number Structure General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with

More information

V REG.-Nr. 115719, Z E135149 Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays

V REG.-Nr. 115719, Z E135149 Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules

More information

Cable Plug acc. to DIN EN 175301-803, Form A

Cable Plug acc. to DIN EN 175301-803, Form A Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with

More information

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal

More information

The Best Relaytion. Reed Relays. 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04

The Best Relaytion. Reed Relays. 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 The Best Relaytion Reed Relays 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 1 and 2 pole relays non-polarized, non-latching Features Direct coil control with TTL-signals possible Highly reliable

More information

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet

Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order

More information

1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)

1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type K only) FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and

More information

Goodsky Technical Data. Contact Details

Goodsky Technical Data. Contact Details Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

More information

FP2 Relay. The Best Relaytion

FP2 Relay. The Best Relaytion The Best Relaytion 2 pole telecom / signal relay Through Hole Type (THT) Polarized. Relay types: non-latching with1 coil latching with 1 coil latching with 2 coils Features Telecom / signal relay (dry

More information

CQM1-SF200/CS1W-SF200

CQM1-SF200/CS1W-SF200 Safety Relay Unit ( I/O Unit Type) CQM1-SF200/CS1W-SF200 CSM_CQM1-SF200_CS1W-SF200_DS_E_2_1 A Safety Relay Unit That Functions as a I/O Unit. Less Installation Space and Wiring Required. Safety Relay Unit

More information

38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.

38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6. 38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC

More information

1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C

1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between

More information

G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm

G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm Slim Plug-In Safety Relay Slim Safety Relay for Machine Control H Slim body only 13 x 24 x 50 mm (six poles) H Four-pole and six-pole models are available H Terminal arrangement simplifies PCB pattern

More information

60 Series - General purpose relays 6-10 A. Features 60.12 60.13

60 Series - General purpose relays 6-10 A. Features 60.12 60.13 Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing (certain relay/socket combinations)

More information

Type Contact material Contact form Construction Model General purpose AgCdO SPDT Semi-sealed G2R-1

Type Contact material Contact form Construction Model General purpose AgCdO SPDT Semi-sealed G2R-1 Power PCB Relay G2R Creepage distance of 8.0 mm (0.31) min. between coil and contact. Dual-winding latching type available. Plug-in and quick-connect terminals available. High sensitivity (360 mw) and

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy

More information

Reed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay

Reed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay AXICOM AXICOM 108-98011 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not

More information

POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES

POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and

More information

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only

More information

AZ420 MINIATURE GENERAL PURPOSE RELAY

AZ420 MINIATURE GENERAL PURPOSE RELAY MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available

More information

1 POLE - 5A SLIM POWER RELAY

1 POLE - 5A SLIM POWER RELAY POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw

More information

SZR-LY Series. General Purpose Power Relay WARNING WARNING. Sensing and Control

SZR-LY Series. General Purpose Power Relay WARNING WARNING. Sensing and Control Power Relay FEATURES Small package design ARC barrier equipped Silver Cadium Oxide contact High dielectric strength (,800 Vac) High reliability and long life Ultra-high sensitivity with quick response

More information

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules

Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules CHIEF EN TERPRISES INC. M a s t e r I n t e r n a t i o n a l D i s t r i b u t o r Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules M AS TER IN

More information

Pluggable interface relays CR-P Pcb relays

Pluggable interface relays CR-P Pcb relays 2CDC 293 034 F0004 1 2 4 3 Features 9 different supply s: DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2 c/o (8 A) Cadmium-free contact

More information

Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information

Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC

More information

Type Sealing Poles Contacts Rated voltage Model Standard d Flux-tight 4 poles oes 3PST-NO, SPST-NC 24 VDC G7SA-3A1B 3PST-NO, 3PST-NC

Type Sealing Poles Contacts Rated voltage Model Standard d Flux-tight 4 poles oes 3PST-NO, SPST-NC 24 VDC G7SA-3A1B 3PST-NO, 3PST-NC Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,

More information

DATA SHEET COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE

DATA SHEET COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE DATA SHEET MINIATURE SIGNAL RELAY EC SERIES COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE DESCRIPTI The EC series has reduced mounting space but sustained high-performance of NEC

More information

Three-phase monitoring relay CM-PFE

Three-phase monitoring relay CM-PFE Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic

More information

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of

More information

Safety automation solutions

Safety automation solutions Operating principle, characteristics Preventa safety s types XPS AV,, For and switch monitoring Operating principle Safety s XPS AV, and are used for monitoring circuits conforming to standards EN/ISO

More information

SPST-NO SPDT DPST-NO DPDT

SPST-NO SPDT DPST-NO DPDT PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0

More information

RT series Miniature Printed Circuit Board Relays, Sockets and Accessories

RT series Miniature Printed Circuit Board Relays, Sockets and Accessories s RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File

More information

SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES

SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape

More information

1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting

1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8

More information

E-STOP relays, safety gate monitors

E-STOP relays, safety gate monitors Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided

More information

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.

More information

Thermal-Magnetic Circuit Breaker 3120-...-M1-..

Thermal-Magnetic Circuit Breaker 3120-...-M1-.. Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping

More information

SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications

SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:

More information

General-purpose Relay

General-purpose Relay General-purpose Relay An Improved Miniature Power Relay with Many Models for Sequence Control and Power Applications A wide range of relay variations including ones with operation indicators, high-capacity

More information

1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series

1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) High insulation Insulation distance (between coil and

More information

Ordering Information. Cylindrical Proximity Sensor E2E/E2E2

Ordering Information. Cylindrical Proximity Sensor E2E/E2E2 Cylindrical Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened

More information

Panel Meters and Controllers Modular Panel Meter Type EDM 35

Panel Meters and Controllers Modular Panel Meter Type EDM 35 Panel Meters and Controllers Modular Panel Meter Type EDM 35 Modular digital panel meter, 3 1/2-digit Indicating or controlling current, voltage, resistance, temperature, tacho or frequency. Easy programming

More information

Telemecanique Zelio Relay complementary and easy to assemble

Telemecanique Zelio Relay complementary and easy to assemble Telemecanique Zelio Relay complementary and easy to assemble Get more with the world s Power & Control specialist RS interface relays Compact dimensions, enabling multiplication of contacts in electrical

More information

RM4TG20 three-phase network control relay RM4-T - range 200..500 V

RM4TG20 three-phase network control relay RM4-T - range 200..500 V Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking

More information

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications. Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description

More information

Safety technique. Emergency stop module BO 5988 safemaster

Safety technique. Emergency stop module BO 5988 safemaster Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1

More information

PCB transformers. Short circuit proof PCB transformer VB. General Data. Advantages. Applications. Circuit diagram. Standards & 1 Certifications W v

PCB transformers. Short circuit proof PCB transformer VB. General Data. Advantages. Applications. Circuit diagram. Standards & 1 Certifications W v Short circuit PCB transformer General Data Rated input 230 Vac Rated output 6-2 x 24 Vac Rated power 0.35-3.2 VA Insulation class B Maximum ambient temperature 70 C Efficiency up to 58 % Degree of protection

More information

LAUBE TECHNOLOGY DRY REED RELAYS

LAUBE TECHNOLOGY DRY REED RELAYS LAUBE TECHNOLOGY DRY REED RELAYS CONTACT FORM CURRENT PART SERIES PAGE #'S (1A) SPST-NO 1 AMP D41A...0L 147~148 (Link) (1A) SPST-NO 1 AMP D71A.1.0 149~150 (Link) (1A) SPST-NO 1 AMP F51A.100 151~152 (Link)

More information

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050 Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage

More information

DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES

DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.

More information

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!

More information

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw 4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and

More information

Data Sheet. Electro-mechanical counters Hengstler 800 series

Data Sheet. Electro-mechanical counters Hengstler 800 series Data Pack D Issued March 00 504897 Data Sheet Electro-mechanical counters Hengstler 800 series The 800 series totalising and predetermining batch counters, manufactured by Hengstler, is available from

More information

Automation System TROVIS 6400 TROVIS 6493 Compact Controller

Automation System TROVIS 6400 TROVIS 6493 Compact Controller Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general

More information

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component. Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on

More information

Control Devices Catalogue. Control Devices. Preferred and Standard Products

Control Devices Catalogue. Control Devices. Preferred and Standard Products Control Devices Catalogue Control Devices Preferred and Standard Products KOP.J Timer Electronic 22.5 mm Characteristics Mounting KOP.J 22.5 mm mono or multifunction high immunity to interference surface

More information

POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES

POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting

More information

4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES

4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES 4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS FEATURES 28. 1.12 12..472 1.4.49 The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High

More information

Solid-State Timer H3G

Solid-State Timer H3G ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11000(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid-State Timer Low-Cost, Plug-In

More information

Type: DILM32 10(24V50HZ) Article No.: 277247

Type: DILM32 10(24V50HZ) Article No.: 277247 Type: DILM32 10(24V50HZ) Article No.: 277247 Ordering information Rated operational current AC 3 400 V I e A 32 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,

More information

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,

More information

1 POLE - 8A Medium Load Control

1 POLE - 8A Medium Load Control POWER RELAY 1 POLE - 8A Medium Load Control JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile and space saving - Height: 12.5 mm - Mounting

More information

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage

More information

E-STOP relays, safety gate monitors

E-STOP relays, safety gate monitors Unit features Safety features gang engertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided

More information

AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals

AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits

More information

Description Part-No. Type PU. Nominal voltage DC12V 768001 Relais-SNR 12V 1W 20 DC 24 V 768002 Relais-SNR 24V 1W 20

Description Part-No. Type PU. Nominal voltage DC12V 768001 Relais-SNR 12V 1W 20 DC 24 V 768002 Relais-SNR 24V 1W 20 Replacement relay, 1COcontact, 6 A, : AgSnO 2,AgSnO 2 +5 µm HV Relay with AgSnO 2 Nominal voltage DC12V 768001 Relais-SNR 12V 1W 20 768002 Relais-SNR 24V 1W 20 DC 60 V 768003 Relais-SNR 60V 1W 20 Relay

More information

Number of poles 1-pole 2-pole Minimum Enclosure Contact. G2R-1AZ G2R-1Z DC Fully sealed G2R-1AZ4 G2R-1Z4 G2R-1A-E G2R-1-E

Number of poles 1-pole 2-pole Minimum Enclosure Contact. G2R-1AZ G2R-1Z DC Fully sealed G2R-1AZ4 G2R-1Z4 G2R-1A-E G2R-1-E PCB Power elay The Best Seller eneral purpose power elays of single-pole0 A and double-pole A. Safety-oriented design with dielectric strength of,000 V between coil and contacts, and surge resistance of

More information

AXICOM Telecom-, Signal and RF Relays. Cradle Relay S V23054 / V23062. 108-98014 Nov. 07 Rev. C ECOC: JM10

AXICOM Telecom-, Signal and RF Relays. Cradle Relay S V23054 / V23062. 108-98014 Nov. 07 Rev. C ECOC: JM10 Cradle Relay S V23054 / V23062 108-98014 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics

More information

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals

NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101433D0201 28/03/11 NF71E-.. / NFZ71E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits.

More information

Modular I/O System Analog and Digital Interface Modules

Modular I/O System Analog and Digital Interface Modules OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part

More information

13 SERIES. Electronic step relays 10-16 A 13.81 13.91

13 SERIES. Electronic step relays 10-16 A 13.81 13.91 13 Electronic step relays 10-16 A 13 13.81 - Electronic step relay - Rail mount - 1 Pole 13.91 - Electronic step relay and timing step relay Switch box mount - 1 Pole Fixed time (10 minutes) timing function

More information

(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII

(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII Non-promotional not for new designs FTR-K1 SERIES POWER RELAY 1 POLE - 10A VS Series FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-5 is available Working class: C UL class B (130 C) coil wire insulation

More information

Circuit Breakers. NRC Series. NRC Series. 900 www.idec.com

Circuit Breakers. NRC Series. NRC Series. 900 www.idec.com Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,

More information

O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications

O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection

More information

LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil

LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil Product data sheet Characteristics LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of

More information

TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS

TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between

More information

Fast, reliable, ultra-precise. My-Com precision switches.

Fast, reliable, ultra-precise. My-Com precision switches. Fast, reliable, ultra-precise.. Unrivaled 1 μm repeat accuracy Setting reference points, monitoring tolerances, controlling, adjusting. Fast, reliable, ultra-precise. Uncompromising accuracy tried and

More information

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff

More information

2 POLES - 5A LOW PROFILE TYPE

2 POLES - 5A LOW PROFILE TYPE FTR-K1 SERIES POWER RELAY 2 POLES - 5A LOW PROFILE TYPE FTR-F1 Series FEATURES Low profile (height: 16.5mm) DPST/DPDT 5A, TV-3 rating available High insulation (due to its reinforced insulation construction)

More information

Electronic Control Devices The European Product Catalogue 2007

Electronic Control Devices The European Product Catalogue 2007 FX14 Field Controller (1/4) FX14 Field Controller The FX14 is an equipment field controller in the Facility Explorer range of products. The controller is designed specifically for commercial Heating, Ventilating,

More information

Power Supplies 3. SDN-P DIN Rail Series

Power Supplies 3. SDN-P DIN Rail Series SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.

More information

IO-RM3 3-Stage Relay Module

IO-RM3 3-Stage Relay Module Page 1 of 6 IO-RM3 3-Stage Relay Module Features: Benefits: Link selectable modes binary, heat/cool, staged or sequenced On/Off/Auto links for ease of commissioning DIN Rail mounting Fault finding LED

More information