MAINS FITTINGS BUILDING SERVICES AND UTILITIES MAINS FITTINGS

Transcription

1 MAINS FITTINGS BUILDING SERVICES AND UTILITIES MAINS FITTINGS

2 WASK is a leading brand of specialist transition fittings and pipeline equipment for the gas and water industries. WASK products have been serving the utilities market for 120 years. Products are used in many countries around the world. WASK has earned a reputation for supplying technically innovative and high quality products, with an ongoing commitment to product development. The company is continually upgrading its product range and offering new designs to meet the varying and challenging needs of the market. Development collaboration with some leading international gas companies has led to jointly patented designs for some particularly demanding applications. The popular use of polyethylene (PE) pipes has increased the demand for jointing systems to achieve secure connections between lengths of PE or between PE and other pipe materials. The complete PECAT range is fully compatible with MDPE (PE 80) and HDPE (PE 100) pipe and is therefore capable of exceeding the full working pressure of the pipe. Most PECAT fittings are manufactured from forged steel and are machined in sizes up to 1000mm diameter. Quality Assurance WASK operates a quality assurance system which is certified to comply with BS EN ISO Approvals PECAT fittings have been approved by a number of leading European utilities. Installation PECAT mains fittings are normally supplied factory assembled with a PE tail, ready for fusion jointing into the network. For particular applications it may be necessary for the joint to be assembled on site for which site-assembly machines are available. Design The PECAT joint is stronger than the pipe itself both initially and after years of service. PECAT fittings have been used in critical pipeline applications throughout the world for more than twenty years. The joint consists of a spigot incorporating specially designed annular grooves and a completion sleeve, the inside diameter of which corresponds to the nominal outside diameter of the PE pipe. The spigot is pressed into the PE pipe causing a temporary expansion of the pipe. Pressing home the external completion sleeve causes the PE to flow over the remaining spigot area and into the grooves. The PE contained within these grooves makes the joint stronger than the pipe itself, indeed, when subjected to a pull test, the PE pipe will yield at a point away from the joint, demonstrating full end load capability. Additional Information For further details of the PECAT range or any other WASK products, please contact the Technical Support Department on +44 (0) Note s and illustrations in this publication are for general guidance only. No responsibility can be accepted for any errors, omissions or incorrect assumptions. Refer to the product itself if more detailed information is required. Due to the continuing programme of product improvement Crane Ltd reserves the right to amend any published information or to modify any product without prior notice. WASK & PECAT are registered trademarks of Crane Ltd. Other trademarks are the property of their respective owners. FM00311 ISO Tel: +44 (0) Fax: +44 (0)

3 C O N T E N T S Contents Page Number PECAT Flange Adapter 4 PECAT Valve Flange Adapter 6 PECAT Flange Bolt Kits 7 PECAT Governor Riser Transition Fitting 8 PECAT Weld Transitions 9 PECAT Base Plate Transition Fitting 10 PECATadapter 11 Mains Completion Plugs 11 Tel: +44 (0) Fax: +44 (0)1473 Website: sales@wask-uk.com 3

4 PECAT - Flange Adapter Product Application Provides a high strength transition joint for connecting polyethylene pipe to flanged pipes, valves and equipment. Comprising a PECAT joint with corresponding PN16 raised face flange. Construction Main body and PECAT sleeve: Mild steel tube to ST52.0 DIN1629 Flange ring: Mild steel plate to BS 4360/43A Corrosion protection: (Gas) zinc plated and passivated (Water) fusion bonded epoxy or nylon coating Installation All PECAT flange adapters are supplied factory assembled with 0.5/1metre PE pipe, suitable for jointing by butt-fusion or an electro-fusion coupler into a system. Loose backing rings allow for easy alignment with mating PN16 flanges. Please refer to pipe or fitting manufacturer s instructions for details on electro-fusion and butt-fusion timings and procedures. Other sizes and flange specification (BS10, table D or ASA 150) available to special order. * SDR to any configuration Part no PE Pipe Grade & Length Finish Nominal Size Comments BN2284 PE 100 Black, 1m Zinc Plated 63mm SDR11 x 2" ASA150 flange BN2290 PE 80 Yellow, 1m Rilsan Black 63mm SDR11 x 2" ASA150 flange BN2002 PE 80 Yellow, 0.5m Zinc Plated 63mm SDR11 x DN50 PN16 flange BN2104 PE 100 Orange, 0.5m Zinc Plated 63mm SDR11 x DN50 PN16 flange BN2291 PE 80 Yellow, 1m Rilsan Black 90mm SDR11 x 3" ASA150 flange BN2344 PE100 Black, 1m Zinc Plated 90mm SDR11 x 3" ASA150 flange BN2009 PE 80 Yellow, 0.5m Zinc Plated 90mm SDR11 x DN100 PN16 flange BN2108 PE 100 Orange, 0.5m Zinc Plated 90mm SDR11 x DN100 PN16 flange BN2106 PE 100 Orange, 0.5m Zinc Plated 90mm SDR11 x DN80 PN16 flange BN2285 PE 100 Black, 1m Zinc Plated 125mm SDR11 x 4" ASA150 flange BN2292 PE 80 Yellow, 1m Rilsan Black 125mm SDR11 x 4" ASA150 flange BN2143 PE 100 Orange, 0.5m Zinc Plated 125mm SDR11 x DN100 PN16 flange BN2289 PE 80 Yellow, 1m Rilsan Black 180mm SDR11 x 6" ASA150 flange BN2345 PE100 Black, 1m Zinc Plated 180mm SDR11 x 6" ASA150 flange BN2062 PE 80 Yellow, 0.5m Zinc Plated 180mm SDR11 x DN150 PN16 flange BN2111 PE 100 Orange, 0.5m Zinc Plated 180mm SDR11 x DN150 PN16 flange BN2250 PE 100 Orange, 0.5m Zinc Plated 180mm SDR11 x DN200 PN16 flange BN2017 PE 80 Yellow, 0.5m Zinc Plated 180mm SDR17 x DN150 PN16 flange BN2039 PE 80 Yellow, 0.5m Zinc Plated 180mm SDR17 x DN200 PN16 flange BN2350 PE 100 Orange, 1m Zinc Plated 250mm SDR11 x 250 PN10 flange BN2293 PE 80 Yellow, 1m Rilsan Black 250mm SDR11 x 8" ASA150 flange BN2337 PE100 Black, 1m Zinc Plated 250mm SDR11 x 8" ASA150 flange 4 Tel: +44 (0) Fax: +44 (0)

5 Part no PE Pipe Grade & Length Finish Nominal Size Comments BN2144 PE 100 Orange, 0.5m Zinc Plated 250mm SDR11 x DN200 PN16 flange BN2236 PE 80 Yellow, 1m Zinc Plated 250mm SDR11 x DN200 PN16 flange BN2252 PE 80, 0.5m Zinc Plated 250mm SDR11 x DN200 PN16 flange Includes Bolt Kit JL2022 BN2296 PE 80 Yellow, 1m Rilsan Black 250mm SDR11 x DN200 PN16 flange BN2114 PE 100 Orange, 0.5m Zinc Plated 250mm SDR11 x DN250 PN16 flange BN2297 PE 80 Yellow, 0.5m Zinc Plated 250mm SDR11 x DN250 PN16 flange Includes Bolt Kit JL2024 BN2253 PE 80 Yellow, 0.5m Zinc Plated 250mm SDR11 x DN300 PN16 flange Includes Bolt Kit JL2026 BN2254 PE 80 Yellow, 0.5m Zinc Plated 250mm SDR17 x DN200 PN16 flange Includes Bolt Kit JL2022 BN2255 PE 80 Yellow, 0.5m Zinc Plated 250mm SDR17 x DN300 PN16 flange Includes Bolt Kit JL2026 BN2346 PE100 Black, 1m Zinc Plated 315mm SDR11 x 10" ASA150 flange BN2349 PE 80 Yellow, 1m Zinc Plated 315mm SDR11 x 10" ASA150 flange BN2287 PE 100 Orange, 1m Zinc Plated 315mm SDR11 x DN250 PN16 flange BN2352 PE 100 Orange, 1m Zinc Plated 315mm SDR11 x DN300 PN10 flange BN2113 PE 100 Orange, 1m Zinc Plated 315mm SDR11 x DN300 PN16 flange BN2257 PE 80 Yellow, 1m Zinc Plated 315mm SDR11 x DN300 PN16 flange Includes Bolt Kit JL2026 BN2288 PE 80 Yellow Zinc Plated 315mm SDR11 x DN350 PN16 flange BN2341 PE 100 Orange, 1m Zinc Plated 315mm SDR11 x DN350 PN16 flange BN2061 PE 80 Yellow, 1m Zinc Plated 315mm SDR17 x DN250 PN16 flange BN2354 PE100 Black, 1m Zinc Plated 315mm SDR17 x DN300 PN10 flange BN2030 PE 80 Yellow, 1m Zinc Plated 315mm SDR17 x DN300 PN16 flange BN2256 PE 80 Yellow, 1m Zinc Plated 315mm SDR17 x DN300 PN16 flange Includes Bolt Kit JL2026 BN2277 PE 100 Orange, 1m Zinc Plated 355mm SDR11 x 12" ASA150 flange BN2045 PE 80 Yellow, 1m Zinc Plated 355mm SDR17 x DN300 PN16 flange BN2046 PE 80 Yellow, 1m Zinc Plated 355mm SDR17 x DN350 PN16 flange BN2041 PE 80 Yellow, 1m Zinc Plated 355mm SDR17 x DN400 PN16 flange BN2036 PE 80 Yellow, 1m Zinc Plated 355mm SDR17 x DN450 PN16 flange BN2351 PE 100 Orange, 1m Zinc Plated 400mm SDR11 x DN400 PN10 flange BN2323 PE 100 Orange, 1m Zinc Plated 400mm SDR11 x DN400 PN16 flange BN2275 PE 100 Orange, 1m Zinc Plated 400mm SDR11 x DN450 PN16 flange BN2038 PE 80 Yellow, 1m Zinc Plated 400mm SDR17 x DN300 PN16 flange BN2042 PE 80 Yellow, 1m Zinc Plated 400mm SDR17 x DN350 PN16 flange BN2355 PE100 Black, 1m Zinc Plated 400mm SDR17 x DN400 PN10 flange BN2032 PE 80 Yellow, 1m Zinc Plated 400mm SDR17 x DN400 PN16 flange BN2037 PE 80 Yellow, 1m Zinc Plated 400mm SDR17 x DN450 PN16 flange BN2311 PE 100 Orange, 1m Zinc Plated 450mm SDR11 x DN400 PN16 flange BN2298 PE 80 Yellow, 1m Zinc Plated 450mm SDR17 x DN400 PN16 flange BN2142 PE 100 Orange, 1m Zinc Plated 450mm SDR17 x DN450 PN16 flange BN2305 PE 80 Yellow, 1m Zinc Plated 450mm SDR17 x DN450 PN16 flange BN2339 PE100 Black, 1m Zinc Plated 500mm SDR17 x DN500 PN16 flange BN2318 PE 100 Yellow, 1m Zinc Plated 500mm SDR21 x DN400 PN16 flange BN2309 PE 100 Yellow, 1m Zinc Plated 500mm SDR21 x DN450 PN16 flange BN2316 PE 100 Yellow, 1m Zinc Plated 500mm SDR21 x DN500 PN16 flange BN2320 PE 100 Yellow, 1m Zinc Plated 500mm SDR21 x DN600 PN16 flange BN2353 PE100 Black, 1m Zinc Plated 560mm SDR17 x DN500 PN10 flange BN2356 PE100 Black, 1m Zinc Plated 630mm SDR17 x DN600 PN10 flange BN2310 PE 100 Yellow, 1m Zinc Plated 630mm SDR21 x DN600 PN16 flange Website: sales@wask-uk.com 5

6 PECAT - Valve Flange Adapter Product Application This fitting provides a connection, with steel extension piece, from polyethylene to flanged pipes, valves and equipment. The fitting has been specially designed to prevent the valve operating torque being transferred to the PE pipe during opening and closing. The typical design features both a 25mm (1 ) pressure point and a 50mm (2 ) purge point. The pressure point features a PN16 or ASA flange to match the main flange. This allows for accurate monitoring of mains pressure - especially useful in a situation where a section of main has to be shut off for repairs. The flanged purge point facility permits the connection of a bypass to divert the gas flow around a section of main or across a valve, which may be necessary when carrying out repairs. Each fitting is supplied painted and fitted with a boss to which can be connected a cathodic protection terminal. Construction Main body and PECAT sleeve: Mild steel tube to ST52.0 DIN 1629 n End ring and flanges: Mild steel plate to BS.4360/43a Pressure point: Mild steel plate to BS.4360/43a Corrosion protection: Main body, end ring and pressure point are coated in black hammer finish paint. PECAT sleeve and flange are zinc plated and passivated to BS Part no No. of Pressure Points PE Pipe Grade & Length Finish Nominal Size BU off PN16 PE 100 Orange, 0.5m Paint - Hammerite Black 63mm SDR11 x DN50 PN16 flange BU2104 1off ASA150 PE 100 Orange, 1m Paint - Hammerite Black 90mm SDR11 x 3" ASA150 flange BU2033 1off PN16 PE 100 Orange, 1m Paint - Hammerite Black 90mm SDR11 x DN100 PN16 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 90mm SDR11 x DN100 PN16 flange BU off PN16 PE 100 Orange, 0.5m Paint - Hammerite Black 90mm SDR11 x DN80 PN16 flange BU off PN16 PE 100 Orange, 0.5m Paint - Hammerite Black 90mm SDR11 x DN80 PN16 flange BU2106 1off ASA150 PE 100 Orange, 1m Paint - Hammerite Black 125mm SDR11 x 4" ASA150 flange BU off PN16 PE 100 Orange, 0.5m Paint - Hammerite Black 125mm SDR11 x DN100 PN16 flange BU2090 1off PN16 PE 100 Orange, 0.5m Paint - Hammerite Black 125mm SDR11 x DN100 PN16 flange BU2103 1off ASA150 PE 100 Orange, 1m Paint - Hammerite Black 180mm SDR11 x 6" ASA150 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 180mm SDR11 x DN150 PN16 flange BU2102 1off ASA150 PE 100 Orange, 1m Paint - Hammerite Black 250mm SDR11 x 8" ASA 150 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 250mm SDR11 x DN200 PN16 flange BU2064 1off PN16 PE 100 Orange, 1m Paint - Hammerite Black 250mm SDR11 x DN200 PN16 flange BU off ASA150 PE 100 Orange, 1m Paint - Hammerite Black 250mm SDR11 x DN200 PN16 flange BU off PN16 PE 100 Orange, 0.5m Paint - Hammerite Black 250mm SDR11 x DN250 PN16 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 250mm SDR11 x DN250 PN16 flange BU2101 1off ASA150 PE 100 Orange, 1m Paint - Hammerite Black 315mm SDR11 x 10" ASA150 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 315mm SDR11 x DN250 PN16 flange 6 Tel: +44 (0) Fax: +44 (0)

7 Part no No. of Pressure Points Other sizes available to special order. PE Pipe Grade & Length Finish Nominal Size BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 315mm SDR11 x DN300 PN16 flange BU2063 1off PN16 PE 100 Orange, 1m Paint - Hammerite Black 315mm SDR11 x DN300 PN16 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 355mm SDR11 x DN300 PN16 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 400mm SDR11 x DN400 PN16 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 400mm SDR11 x DN450 PN16 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 450mm SDR11 x DN400 PN16 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 450mm SDR11 x DN450 PN16 flange BU off PN16 PE 100 Orange, 1m Paint - Hammerite Black 450mm SDR11 x DN450 PN16 flange BU off ASA150 PE 100 Yellow, 1m Paint - Hammerite Black 500mm SDR11 x DN600 PN16 flange BU off PN16 PE 100 Yellow, 1m Paint - Hammerite Black 500mm SDR21 x DN450 PN16 flange BU off PN16 PE 100 Yellow, 1m Paint - Hammerite Black 500mm SDR21 x DN500 PN16 flange BU off PN16 PE 100 Yellow, 1m Paint - Hammerite Black 630mm SDR21 x DN600 PN16 flange FLANGE BOLT KITS Comprising Zinc Plated nuts, bolts and washers made from Steel to DIN 931 HT Spec 8.8 The Corrugasket supplied up to 300mm is a moulded Gasket with unique corrugated surfaces of annular grooves gives maximum sealing efficiency with minimum compression for gas, the material complies with BS EN Part no JL2016 JL2017 JL2022 JL2024 JL2026 For Flange Size DN25, PN16 DN50, PN16 DN200,PN16 DN250,PN16 DN300,PN16 Website: sales@wask-uk.com 7

8 PECAT - Governor Riser Transition Fitting Product Application These fittings are specially designed for use with above ground governor modules and eliminate the need for fabricated steel legs and transition fittings. They provide an integrated PE system to be connected directly to the inlet and outlet flanges of the module. This fitting incorporates a steel puddle flange, enabling the fitting to be set firmly into a concrete base providing a secure anchoring point and preventing movement. All above ground PE pipe is protected by a continuous outer steel sleeve in accordance with IGE regulations. Additionally, alignment with the governor module is guaranteed as the distance between the puddle flange and the connecting flange is uniform for all sizes within the range Construction Main body and PECAT sleeve: Mild steel ST52.0 DIN 1629 Puddle flange and outlet flange: Mild steel plate to BS 4360/43A Corrosion protection: A grey fusion bonded epoxy coating for main body, PECAT sleeve and puddle flange. The outlet flange is zinc plated and passivated. Installation Fittings are supplied factory assembled with a PE tail ready for fusion jointing into the supply pipeline. Please refer to the PE pipe manufacturer s instructions for details on electro-fusion and butt-fusion procedures. Part no Pipe Type Finish Nominal Size AD2084 PE 100 Orange Grey Polyester 63mm SDR11 x DN20 PN16 Flange AD2022 PE 80 Yellow Grey Polyester 63mm SDR11 x DN50 PN16 Flange AD2023 PE 100 Orange Grey Polyester 63mm SDR11 x DN50 PN16 Flange AD2029 PE 80 Yellow Grey Polyester 90mm SDR11 x DN100 PN16 Flange AD2077 PE 100 Orange Grey Polyester 90mm SDR11 x DN100 PN16 Flange AD2026 PE 80 Yellow Grey Polyester 90mm SDR11 x DN80 PN16 Flange AD2027 PE 100 Orange Grey Polyester 90mm SDR11 x DN80 PN16 Flange AD2031 PE 80 Yellow Grey Polyester 125mm SDR11 x DN100 PN16 Flange AD2032 PE 100 Orange Grey Polyester 125mm SDR11 x DN100 PN16 Flange AD2043 PE 80 Yellow Grey Polyester 125mm SDR11 x DN150 PN16 Flange AD2040 PE 80 Yellow Grey Polyester 180mm SDR11 x DN150 PN16 Flange AD2041 PE 100 Orange Grey Polyester 180mm SDR11 x DN150 PN16 Flange AD2042 PE 100 Orange Grey Polyester 180mm SDR11 x DN200 PN16 Flange AD2033 PE 80 Yellow Grey Polyester 180mm SDR17 x DN150 PN16 Flange AD2037 PE 80 Yellow Grey Polyester 180mm SDR17 x DN200 PN16 Flange AD2060 PE 100 Orange Grey Polyester 250mm SDR11 x DN200 PN16 Flange AD2069 PE 100 Orange Grey Polyester 250mm SDR11 x DN250 PN16 Flange AD2035 PE 80 Yellow Grey Polyester 250mm SDR17 x DN200 PN16 Flange AD2044 PE 80 Yellow Grey Polyester 250mm SDR17 x DN250 PN16 Flange Other sizes and flange specification (BS10, table D or ASA 150) made to special order only. 8 Tel: +44 (0) Fax: +44 (0)

9 PECAT - Weld Transitions Product Application Provides for a transition between existing steel pipe (plain ended) and polyethylene pipe. The weld transition fittings have been designed specifically for use in the gas industry. Comprising a PECAT joint with a length of welding grade steel tube, the fitting is factory assembled onto PE pipe. Construction Up to and including 160mm diameter: Body: Steel tube seamless to API 5L or ST52.0 DIN 1629; BS 1387 Spigot: Mild steel ST52.0 DIN 1629 PECAT sleeve: Steel tube seamless to ST52.0 DIN 1629 Corrosion protection: The body, spigot & sleeve can be supplied zinc plated / Rilsan coated or untreated depending on customer requirements. The PECAT sleeve is zinc plated and passivated. Over 160mm diameter: Body: Steel tube seamless to API 5L Spigot: Mild steel ST52.0 DIN 1629 PECAT sleeve: Steel tube seamless to ST52.0 DIN 1629 Corrosion protection: The body, spigot and PECAT sleeve can be supplied zinc plated or Rilsan coated or additional protection as required. Larger sizes on application. Installation The steel and PE ends have to be welded and electro-fused or butt-fused respectively to the existing pipe network. Please refer to the PE pipe or fitting manufacturer s instructions for details on electro-fusion and butt-fusion procedures. Part no Steel Pipe Length & Specification Overall Length mm PE Pipe Grade Finish Nominal Size BV mm API 5L 450 ISO4437 Black Zinc Plated 25mm SDR11 x 3/4" steel BV mm API 5L 450 ISO4437 Black Zinc Plated 32mm SDR11 x 1" steel BV mm API 5L 450 PE 80 Yellow Zinc Plated 40mm SDR11 1.1/4" steel BV mm API 5L 450 PE 100 Black Zinc Plated 40mm SDR11 x 1.1/2" steel BV mm API 5L 800 PE100 Black Zinc Plated 40mm SDR11 x 1.1/4" steel BV mm API 5L 460 PE 80 Yellow Zinc Plated 50mm SDR11 x 1.1/2" steel BV mm API 5L 450 PE 100 Black Zinc Plated 63mm SDR11 x 2" steel BV mm API 5L 800 PE 80 Yellow Zinc Plated 63mm SDR11 x 2" steel BV mm API 5L 490 ISO4437 Black Zinc Plated 63mm SDR11 x 2" steel BV mm API 5L 800 PE100 Black Zinc Plated 63mm SDR11 x 2" steel BV mm API 5L 490 PE 80 Yellow Zinc Plated 75mm SDR11 x 2.1/2" steel BV mm BS PE 100 Black Zinc Plated 90mm SDR11 x 3" steel BV mm API 5L 525 PE 80 Yellow Zinc Plated 90mm SDR11 x 3" steel BV mm API 5L Zinc Plated 90mm SDR11 x 3" steel BV mm API 5L 525 PE 100 Black Zinc Plated 90mm SDR11 x 3" steel BV mm API 5L 800 PE100 Black Zinc Plated 90mm SDR11 x 3" steel BV mm API 5L 535 PE 80 Yellow Zinc Plated 110mm SDR11 x 4" steel BV mm API 5L Zinc Plated 110mm SDR11 x 4" steel BV mm API 5L 866 PE 100 Black Zinc Plated 110mm SDR11 x 4" steel Website: sales@wask-uk.com 9

10 Part no Steel Pipe Length & Specification *SDR 11 & other sizes available to special order. Overall Length mm PE Pipe Grade Finish Nominal Size BV mm API 5L 525 PE 100 Black Zinc Plated 110mm SDR11 x 4" steel BV mm BS PE 100 Black Zinc Plated 125mm SDR11 x 4" steel BV mm API 5L 585 PE 80 Yellow Zinc Plated 125mm SDR11 x 4" steel BV mm API 5L 835 PE 100 Black Zinc Plated 160mm SDR11 x 6" steel BV mm BS PE 100 Black Zinc Plated 160mm SDR11 x 6" steel BV mm API 5L 635 PE 80 Yellow Zinc Plated 160mm SDR11 x 6" steel BV mm API 5L Zinc Plated 160mm SDR11 x 6" steel BV mm API 5L 750 PE100 Orange Zinc Plated 180mm SDR11 x 6" steel BV mm BS PE 100 Black Zinc Plated 180mm SDR11 x 6" steel BV mm API 5L 600 PE 100 Black Zinc Plated 200mm SDR11 x 8" steel BV mm API 5L 750 PE 100 Black Zinc Plated 200mm SDR11 x 8" steel BV mm API 5L 678 PE 100 Black Zinc Plated 200mm SDR11 x 8" steel BV mm API 5L 900 PE 80 Yellow Uncoated 200mm SDR11 x 8" steel BV mm API 5L Zinc Plated 200mm SDR11 x 8" steel BV mm API 5L 600 PE 100 Black Zinc Plated 225mm SDR11 x 8" steel BV mm API 5L 800 PE 100 Black Zinc Plated 225mm SDR11 x 8" steel BV mm API 5L 630 PE 100 Black Zinc Plated 250mm SDR11 x 10" steel BV mm API 5L 1000 PE 80 Yellow Uncoated 250mm SDR11 x 10" steel BV mm API 5L 1000 PE 100 Orange Uncoated 250mm SDR11 x 10" steel BV mm API 5L 1000 PE100 Orange Zinc Plated 250mm SDR11 x 10" steel BV mm API 5L 1000 PE80 Yellow Zinc Plated 250mm SDR11 x 12" steel BV mm API 5L 630 PE 100 Black Zinc Plated 250mm SDR11 x 8" steel BV mm DIN1629 ST PE 80 Yellow Zinc Plated 250mm SDR11 x 8" steel BV mm DIN1629 ST PE 80 Yellow Rilsan Black 250mm SDR11 x 8" steel BV mm API 5L 750 PE 80 Yellow Zinc Plated 250mm SDR11 x 8" steel BV mm DIN1629 ST PE 80 Yellow Rilsan Black 315mm SDR11 x 10" steel BV mm API 5L 1000 PE 100 Orange Zinc Plated 315mm SDR11 x 10" steel BV mm API 5L 1000 PE 80 Yellow Uncoated 315mm SDR11 x 12" steel BV mm API 5L 1000 PE 100 Orange Zinc Plated 315mm SDR11 x 12" steel BV mm API 5L 1000 PE80 Yellow Zinc Plated 315mm SDR11 x 12" steel BV mm DIN1629 ST PE 80 Yellow Paint - Hammerite Black 450mm SDR11 x 16" steel PECAT - Base Plate Transition Fitting Product Application and This fitting has the same application as the governor riser transition fitting. It is designed for use in meter/governor house connections. Comprises 1 metre length PE pipe, fusion bonded epoxy coated floor mounting plate drilled with 4 holes. Zinc plated female screwed outlet or flanged connection. Made to customer specification. Part no Pipe Type Finish Nominal Size AD2001 PE 80 Yellow Grey Polyester 63mm SDR 11 x 2" Rp AD2002 PE 80 Yellow Grey Polyester 63mm SDR 11 x 2" R 10 Tel: +44 (0) Fax: +44 (0)

11 PECAT - Pecatadapter Product Application Provides for a transition between existing steel, ductile, spun iron or PVC piping and polyethylene pipe. The Pecatadapter utilises the patented full end load PECAT jointing system in conjunction with the wide range bolted flexible Maxifit joint. The depth of the Maxifit end allows for some angularity on the steel pipe, making it easy to install and allowing for pipeline movement such as ground settlement. The fitting, which is supplied complete with 0.5 metre PE 80 tail, replaces two back-to-back flange adapters which would normally be used when making such connections. This reduces the likelihood of leakage and reduces stockholding and installation costs. Construction Main body: Casting to BS.2789 Grade 420/12 Bolting Flange: Casting to BS.2789 Grade 420/12 M.C.I. to BS 6681-W40-05 PECAT sleeve: Mild steel - ST52.0 DIN 1629 Nuts/bolts: Stainless steel Seal: Nitrile Grade BS EN Corrosion Protection: Rilsan black coating on metal parts. Installation The Maxifit end of the Pecatadapter is simply slipped over the end of the ferrous or PVC pipe (no disassembling required) ensuring that the whole width of the seal is in contact with the outer surface of the pipe. The bolts are then tightened in sequence to the recommended torque rating. Please refer to the PE pipe or fitting manufacturer s instructions for details on electro-fusion and butt-fusion procedures. Part no Metal Pipe Range, mm Nominal Size BR mm SDR17 x 3" BR mm SDR17 x 4" BR mm SDR17 x 4" BR mm SDR17 x 6" BR mm SDR17 x 6" BR mm SDR17 x 10" BR mm SDR17 x 8" BR mm SDR17 x 10" BR mm SDR17 x 12" BR mm SDR17 x 12" Mains Completion Plugs Emid Mains Completion Plug Malleable iron, suitable for the closure of tapped holes in distribution mains up to 2 bar pressure. Non-Tap Plug Manufactured under licence from National Grid plc. Designed for the closure of non-tapped holes following flow stopping operations. Spare gaskets available separately Part no Pipe Type Finish Nominal Size AY0001 CI, DI, Steel Uncoated Rs3/4" AY0003 CI, DI, Steel Uncoated Rs1" AY0005 CI, DI, Steel Uncoated Rs1.1/4" AY0006 CI, DI, Steel Uncoated Rs1.1/2" AY0007 CI, DI, Steel Uncoated Rs2" Part no Pipe Type Finish Nominal Size AW0003 CI, DI, Steel Zinc Plated 2.1/2" AW0005 CI, DI, Steel Zinc Plated 3" AW0007 CI, DI, Steel Zinc Plated 4" AW0009 CI, DI, Steel Zinc Plated 5" AW0011 CI, DI, Steel Zinc Plated 6" Website: sales@wask-uk.com 11

12 FM00311 ISO 9001 Tel: Fax: (0) (0) Nacton Road Ipswich Suffolk IP3 9QH