Tel : +31 (0) Fax: +31 (0)
|
|
|
- Eleanor Jenkins
- 7 years ago
- Views:
Transcription
1 IPS Group BV Jan van Galenstraat JG Schiedam The Netherlands Tel : +31 (0) Fax: +31 (0) info@ipsgroupbv.com THIS DOCUMENT AND THE INFORMATION IN IT ARE PROVIDED IN CONFIDENCE, FOR INFORMATIVE PURPOSES. ALL CONTENT IS COPYRIGHTED MATERIAL BELONGING TO IPS GROUP BV, AND SHOULD NOT BE USED AND/OR ALTERED WITHOUT PERMISSION.
2 ABOUT IPS GROUP IPS is a well known industrial service provider. Based in the Netherlands, we specialize in Total Project Supply, Project Management and Procurement Services. IPS Group BV is a service company that takes care of all your purchase and project needs. We specialize in the supply of industrial equipment, pipes, fittings, flanges, valves, and spare parts, to the oil and gas industry for their projects and MRO needs. Since 1995 we act as a procurement and project provider for many local and overseas companies. We are well known in the energy market and very well accepted as the customer s official representatives by the supply market. Our strive is to meet the standard of our customers for the highest levels of quality, security and environmental conviction. We are your one stop shop, your supply chain partner that makes your transactions easier, quicker and more efficient. 1
3 The activities of the IPS Group BV: Project Supply and Project Management IPS Group BV is a specialist in dealing with your projects worldwide. As your project partner, we take care of the supply of all industrial equipment. We take care of the sourcing, storage, supply and managing the paperwork. Procurement Services IPS Group BV provides procurement contracts. We take care of all your requirements. We source and supply worldwide according to your wishes. All paperwork will be dealt with by us. Valve Manufacturing The affiliate of the IPS Group BV, Maverick Valves, is a Dutch manufacturer of Gate, Globe, Check, Ball, and Butterfly Valves, which is equipped to supply both standard and custom made valves.
4 PRODUCTS Pipes & Tubings, seamless and welded Dimensions : - 1/8-56, Wall: SCH10S - SCHXXS - ASTM / API / DIN / EN Carbon Steel : - A53 gr.a, B - A106 gr.b,c - A333 gr.3, 6 - API 5L gr.b, X42, X52, X60, X65, X70 Alloy Steel : - A335 gr.p1, P5, P9, P11, P12, P22, P91 Nickel Alloys Clad Materials Stainless Steel : - A312 / A (L/H), 316 (L/H/Ti), 321(H), 347(H) 6Mo : - A790, UNS S31254 Duplex : - A790, UNS S31803 Super Duplex: - A790, UNS S32750 / S32760 Fittings, seamless and welded Dimensions : - 1/8-48, Wall: SCH10S - SCHXXS Elbows : - In 3D, 5D - Butt weld ASTM / EN / ISO - 45, 90, 180 deg. - Long Radius, Short Radius Branch Connections : - Weldolet, Nipolet, Weldoflange, Nipoflange, Sockolet, Treadolet # / 6000 # / 9000 # Tees : - Butt weld ASTM / EN / ISO - Equal Tees - Reducing Tees Reducers : - Butt weld ASTM / EN / ISO - Concentric Reducers - Eccentric Reducers Caps : - Butt weld ASTM / EN / ISO Stub ends : - MSS SP-75 Carbon Steel : - A234 WPB, WPC - A420 WPL3, WPL 6 - A333 gr.3, 6 - A860 WPHY 42, 52, 60, 65, 70 - St P235 -P265, P 275NL2, - P355 - L415 Alloy Steel : - A234, WP1, WP5, WP9, WP11, WP12, WP22, WP91 Nickel Alloys Clad Materials Stainless Steel : - A (L/H), 316 (L/H/Ti), 321(H), 347(H) /6, /4, , Mo : - A790, UNS S Duplex : - A790, UNS S Super Duplex: - A790, UNS S32750, S
5 Flanges Dimensions : - 1/8-56, Wall: SCH10S - SCHXXS - ASTM / API / DIN / EN Types : - Welding neck flange - Slip on flange - Blind flange - Lap joint flange - Socket Weld flange - Loose flange - Plain Welding flange Specials : - Anchor flanges - Orifice flanges Carbon Steel : - A105 C21, C EN A350 LF2, LF3, LF4, LF6 - A694 F42, F52, F60, F65, F70 Alloy Steel : - A182 - F1, F5, F9, F11, F12, F22, F91 Nickel Alloys Clad Materials Stainless Steel : - A (L), 316(L), 321(H), 347(H) - F44, F51, F , , , Mo : - F44, 6Mo, Duplex : - F51, Super Duplex: - F55, Threaded flange - Long welding neck flanges Plates, Beams & Structural Steels Materials : - Shipbuilding steels - Galvanizing steels - Steels with improved coldforming properties - Age- hardening steels - Nickel alloy steels for low - temperature pressure vessels Grades: - S235JRG2 (Rst 37-2) - S235JRG3 (St 37-3N) - S275JRG3 (St 44-3N) - S355JRG3 (St 52-3N) - Shipbuilding Quality Grade A - Shipbuilding Quality Grade B - P265JRGH (H11) - P265JRGH (17Mn4) - P355NL1/NH (W/T/STE 355) - SA285 Gr C - SA516 Gr 60 - SA516 Gr 70 - AISI 304/L - AISI 316/L
6 PRODUCTS Valves Product Range: - Gate valves - Globe Valves - Ball Valves - Check Valves - Butterfly Valves - Needle Valves - Safety Valves - Control Valves - Diaphragm Valves - Block and Bleed Valves Dimensions: 1/2-56 Class: 150lbs 4500lbs Connections: RF, RTJ, NPT, SW, BW, BSP Cast Steel : - API 600, BS1414, B1873, BS 1868, ANSI class up to 1500lbs Forged Steel: - API 602, BS5352, Ansi class up to 4500lbs Accessories: - Manometers - Actuators (electric, fluid power, manual) - Gearboxes 5
7 Maverick Production Product Range: - Gate Valves - Globe Valves - Ball Valves - Check Valves - Butterfly Valves Temperature Range: -196 to 850 Deg C. Dimensions: 1/2-56 Class: 150lbs 4500lbs API Rating: PSI DIN Rating: PN Connections: RF, RTJ, NPT, SW, BW, BSP Standards: BS 1873, API 602, BS 5352, ASME B16.34, API 6A, ISO 14313, GOST, ISO 17292, API 6D, API 600, API 6DSS Materials include: - Stainless Steels - Zirconium - Duplex / Super Duplex - Alloy and Carbon Steels - Titanium - 6Mo - Nickel - Cunifer - Monel - Feralium - Incoloy - Inconel - Hastelloy Gaskets, Bolts, Studbolts & Nuts Gaskets: - Spiralwound - Ring type joint - Metal jacketed - Graphite - Camprofile - PTFE steel lined - Jointing material Bolts & Studbolts: - B17, B7M, B8, B8M, B16, L7, L7M Nuts: - 2H, 2HM, 4, 7, 7M, 8, 8M
8 PRODUCTS IPS is your one-stop-shop, and does supply industrial spare parts of all kinds Spare Parts - Hoses and Couplings - Filters and Filtration units. - Pumps and accessories - Compressors - Flow meters - Strainers - Insulating joints - O-Rings - Instrumentation Materials - Compression Fittings - Safety equipment - Hand tools - Transmitters - Electrical Equipment - Cables - Circuits - Switches - Drilling equipment - Bulk chemicals - Steel wire rope - Gratings - Spare materials for Valves - Clamps - Any industrial equipment 7
9 REASONS to choose for IPS group Global Supplier Purchasing/Procurement Services Expediting Inspection Transport & Logistics IPS Group BV offers various purchasing, procurement and trading house services to national and international customers. Shipping Documentation Packaging Certificate management Stocks Warehousing Project Department QA/QC Department 24/7
10 CERTIFICATES ISO 9001 RVA 2008 ISO/TS ISO 9001 UKAS 2008 PED Module H FPAL Achilles Achilles JQS GOST R certificate API Q1 API 6A API 6D API 600 API 6DSS 9
11 REFERENCES
12 Group of Companies : IPS Group BV Jan van Galenstraat JG Schiedam The Netherlands Tel : +31 (0) Fax : +31 (0) info@ipsgroupbv.com
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company.
HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company. Based on superb and fair business relationships to long-standing
A.A.NAJJAR TRADING EST.
A.A.NAJJAR TRADING EST. Source of ferrous and non ferrous metals Page 1 ABOUT US We, serve to the requirements of various Industries such as Refineries, Oil & Gas Plants, Fertilizers, Power, Pharmaceuticals,
Technical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
Caps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications. Company Overview
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications Company Overview Delivering promises. Since our foundation in 1980, PCE has grown to become an international
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
WD600 STEAM TRAPS. Thermodynamic Steam Trap
WD600 Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company WD600, WD600L Sizes 3/8, 1/2, 3/4, 1 NPT Material Stainless
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling:
Company Profile RMT operates in field of manufacturing steel valves of high technology for oil, gas petrochemical and power generation. RMT is located in Italy in the town of Solbiate Olona, just north
valve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox.
valve solutions www.quilinox.com Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper valvulas esfera PBM.pdf (1753) 2015/01 1/10 D E SIGN F E A
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 16 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia ORIFICE FLANGES TABLE OF CONTENT SCOPE
www.klmtechgroup.com TABLE OF CONTENTS
Page : 1 of 216 TABLE OF CONTENTS 1 GENERAL 2 1.1 Scope 2 1.2 Code and s 2 1.3 Pressure-Temperature Design 6 1.4 Pipe Wall Thickness Allowance 7 1.5 Ends 8 1.6 Units 8 1.7 Language 9 2 MATERIAL 9 2.1 General
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 10 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts.
CODES AND STANDARDS T. N. GOPINATH For scientific design of Piping Systems, selection of proper material of construction and to detail out the material specifications, knowledge of Codes and Standards
The Augustus Group Products Projects and Engineering Consulting. ASME BOILER AND PRESSURE VESSEL CODE Mike Looram
The Augustus Group Products Projects and Engineering Consulting ASME BOILER AND PRESSURE VESSEL CODE Mike Looram ASME B&PV CODE SECTION VIII DIV. 1 Bolted Flanges With Ring Type Gaskets Stress Calculations
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
SPIRAL WOUND GASKETS Driven by the industry's need for safe, effective sealing solutions, Flexitallic invented the spiral wound gasket.
innovate/customize/educate SPIRAL WOUND GASKETS Driven by the industry's need for safe, effective sealing solutions, Flexitallic invented the spiral wound gasket. www.flexitallic.eu FLEXITALLIC The Flexitallic
Ventilstandarder ett urval av standarder
EN 19:2002 EN 558:2008+A1:2011 EN 593:2009+A1:2011 EN 736-1:1995 EN 736-2:1997 EN 736-3:2008 EN 1074-1:2000 EN 1074-2:2000, A1:2004 EN 1074-3:2000 EN 1074-4:2000 EN 1075-5:2001 EN 1074-6:2008 EN 1171:2002
GYROLOK to Tube Union
GYROLOK HOKE manufactured GYROLOK tube fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities. GYROLOK to Tube Union MANUFACTURED
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
TECHNICAL. information
TECNICAL information Materials Sealing Seals materials are selected according to the service of the valve and leakage requirement. Zero leakage is easier obtained by softer seals, while the resistance
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
API Upstream Standard Development Update - Supply Chain Management. Rick Faircloth
API Upstream Standard Development Update - Supply Chain Management Rick Faircloth o Overview of API 20 Series Supply Chain Management Overview of API 20 Series Supply Chain API formed in 1919 as a national
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
Check Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
Orifice Plates. Specifications
Orifice Plates Orifice plates are most commonly used primary elements for flow measurement in pipelines based on the principle of measurement of differential pressure created when an obstruction is placed
Y O U R G L O B A L G A S K E T P R O V I D E R
Revised 02-12-13 CONTENTS MANUFACTU UNITS 2 INTRODUCTION 3 GASKET IDENTIFICATION 4 AVAILABLE GASKET MATERIALS 5 GASKET SELECTION 6 DIMENSIONAL DATA 7 1 - STYLE CG & CGI TO ASME B16.20 TO SUIT ASME B16.5
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve.
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve. Features Eliminates high cost of installation and maintenance of complex conventional flow control
SITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
CODES AND STANDARDS FOR DESIGN, SUPPLY AND CONSTRUCTION OF NATURAL GAS PIPELINE. Specification for Line Pipe. Specification for Pipeline Valves
CODES AND STANDARDS FOR DESIGN, SUPPLY AND CONSTRUCTION OF NATURAL GAS PIPELINE Description Standard Title Mainline Valve API 5L API 6D ASME B31.8 Specification for Line Pipe Specification for Pipeline
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
KFC Group, S.A. "Global Business Organizer"
KFC Group, S.A. KFC Group, S.A. "Global Business Organizer" KFC Group S.A. is a trading company that does business primarily in the areas of steel, shipbuilding, oil & gas and technology. We have the ability
Bypass level indicator With magnetic display Model BNA
Level measurement Bypass level indicator With magnetic display Model BNA WIKA data sheet LM 10.01 Applications Continuous level indication without power supply Indication of the level proportional to height
www.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 32 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia INSTALLATION, FLUSHING AND TABLE OF
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
DESIGN NOTES WELDING NOTES WELDERS & WELDING PROCEDURES ARE QUALIFIED TO API-1104 RADIOGRAPHY 0.72 DESIGN FACTOR 100% BUTT WELDS PER API-1104 WITH
GENERAL NOTES:. ALL AUILIARY TUBING DESIGN MUST FOLLOW MARATHON STANDARD TNLDGN00. ALL SWAGELOK TUBE FITTINGS MUST BE ASSEMBLED USING POCKET INSTALLATION MANUAL. AUILIARY TUBING ASSEMBLIES SHALL BE SHOP
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
RING TYPE JOINT GASKETS
RING TYPE JOINT GASKETS 05.07 GLOBAL RESOURCE FLEXITALLIC, A WORLDWIDE ORGANIZATION LOCAL SERVICE COMMITTED TO MEETING CUSTOMER NEEDS COMPREHENSIVE PRODUCT RANGE FOR ALL INDUSTRIAL AND PETROCHEMICAL APPLICATIONS
Micro Motion Model D and DL Coriolis Flow and Density Meters
Product Data Sheet PS-00388, Rev. F April 2013 Micro Motion Model D and DL Coriolis Flow and Density Meters Micro Motion Model D and DL sensors provide flow and density measurement for liquids, gases,
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43
Data Sheet Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43 2-Wire Operation Significantly reduces installation costs when compared to a traditional 4-wire magmeter. ±0.5% of rate system accuracy. Patented
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
VAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
SPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
Engineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
API 6D. Trunnion Mounted Ball Valves. Delta Pacific Valve Mfg. Co. New York, U.S.A.
API 6D Trunnion Mounted Ball Valves Delta Pacific Valve Mfg. Co. New York, U.S.A. TABLE OF CONTENTS Page Title Page Title 1 Table of Contents / How To Order 13 Flange Dimensions ANSI Class 150/300 2 Company
PBM has solutions for your valve application.
valve solutions i n d u s t r i a l v a l v e s Whether the application is in a chemical plant, paper mill, food plant, manufacturing environment, or other industrial setting, PBM S line of Industrial
F L A N G E G A S K E T S
FLANGE GASKETS Product overview of flange gaskets for specific information: +44 (0)121 501 20 21 Rubber Rubber sheet and gaskets of NBR, EPDM and CR are used in a wide variety of machine and equipment
www.econosto.uk.com Econosto UK Ltd has supplied valves to industries across the UK, Europe and the rest of the world for over 25 years.
Econosto UK Econosto UK Ltd has supplied valves to industries across the UK, Europe and the rest of the world for over 25 years. Started as Ball Valves UK in 1984, with a clear strategy of maintaining
TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
NORSOK STANDARD COMMON REQUIREMENTS PIPING DETAILS
NORSOK STANDARD COMMON REQUIREMENTS DETAILS L-CR-003 Rev. 1, January 1996 Please note that whilst every effort has been made to ensure the accuracy of the NORSOK standards neither OLF nor TBL or any of
20 TANK CONTAINER STANDARD SPECIFICATION MODEL NUMBER: 24 FSTD 2 QUOTATION NUMBER
REVISION: R0 DATE: 04/04/00 20 TANK CONTAINER STANDARD SPECIFICATION MODEL NUMBER: 24 FSTD 2 QUOTATION NUMBER PROPOSED BY: PREPARED FOR: TRENCOR TANK CONTAINERS - 1 - OPERATOR/ OWNER: 1. Technical Characteristics
CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Spare Parts Program. Parts, Consumables & Accessories. 800.837.9711 superproductsllc.com
Spare Parts Program Parts, Consumables & Accessories TABLE OF CONTENTS Program Introduction 3 Body 4 5 Boom 5 6 Hydraulic 6 Lights & Accessories 7 Tubes, Nozzles & Hose Fittings 8 11 Vacuum 11 Water 12
SECTION 15010 GENERAL REQUIREMENTS, MECHANICAL. 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1.
SECTION 15010 June 16, 2005 GENERAL REQUIREMENTS, MECHANICAL A. GENERAL 1. All piping entering the Shipyard must be controlled per Shipyard Standard Procedure # 21.1-1. 2. All piping shall be in accordance
Compact. Performance. Safety Relief Valves Serie 437 Serie 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Serie 437 Serie 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
Kämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
Questionnaire Pure Media Systems
1. PROJECT INFORMATION: Project Name: Client: Contact Person: Telephone / Fax N : Email: 2. BASIC INFORMATION Type of Pure Media System PW / HPW - Generation PW / HPW - Storage & Distribution System Cold
MADE IN THE USA BALL VA LV ES
MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7
Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Based on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013
SimplexGrinnell TXMAS ecommerce Ferguson Fire and Fabrication Sprinkler Price List Based on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013 Product ID Description TXMAS
Stainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
SUPRApak S Series Filter Housings SUPRApak Filtration For Small Batch Depth Filtration
SUPRApak S Series Filter Housings SUPRApak Filtration For Small Batch Depth Filtration FBSPAKSWASAENc SUPRApak Series SUPRApak S Series Filter Housings Technical Information SUPRApak S series filter housings
Nickel Alloys, Stainless Steel and Other Corrosion Resistant Alloys ALASKAN COPPER & BRASS COMPANY
Bosses and Welding Outlets Branch Outlets in Copper-Nickel, Nickel Alloys, Stainless Steel and Other Corrosion Resistant Alloys ALASKAN COPPER & BRASS COMPANY T he various Alaskan Copper and Brass Company
Procurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector
Procurement, Inventory Management and Supply Chain solutions for the Petrochemicals sector 1 2 About us Saudi Maintenance and Supply Chain Management Company (SMSCMC) is a top-tier integrated supply chain
RMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.