A Guide to the free mesh program Discretizer with OpenFOAM for CFD (Computational Fluid Dynamics)
|
|
- Aron Bishop
- 8 years ago
- Views:
Transcription
1 Discretizer Manual Release date 09/01/10 Side 1 of 13 A Guide to the free mesh program Discretizer with OpenFOAM for CFD (Computational Fluid Dynamics) Homepage: Creator of Discretizer: Bjorn Bergqvist Manual Author: Gerhard Gruber Program and Manual under the GPL license v3 or later
2 Discretizer Manual Release date 09/01/10 Side 2 of 13 Table of Contents 1. Preface 1.1 Introduction 1.2 Installing OpenFOAM 1.3 Installing Discretizer 1.4 Conventions 1.5 Main Window 2. Example 2.1 Step
3 Discretizer Manual Release date 09/01/10 Side 3 of Preface 1.1 Introduction Discretizer is an interactive preprocessing geometry and mesh creation tool. It will create geometry and meshes for three dimensional flow simulations (CFD). It is optimized to work with OpenFOAM as solver and the included post processing program ParaFOAM. 1.2 Installing OpenFOAM Operating System Binary Compiling Ubuntu (9.04) openfoam 16 installation OpenFOAM 1.6 install cookbook Windows Not supported Not supported 1.3 Installing Discretizer Operating System Binary Compiling Linux discretizer 32and64bit Windows Starting Discretizer: Start a Terminal Change to the discretizer Directory Start Discretizer by typing./discretizer32.sh or./discretizer64.sh 1.4 Conventions The Discretizer Manual use the following style conventions. Menu selections, to take orders, are shown in bold. For example: File New Tips have cursive style. For example: Tip: Press the STRG Key
4 Discretizer Manual Release date 09/01/10 Side 4 of Main Window Picture 1: The Main Window of Discretizer 5 1 Pull down menu bar offers the main commands of Discretizer, explanation in chapter 2 Tip: BC is the short cut of Boundary Conditions 2 Icon bar each picture shows his function in the status line or pop up help when you put the mouse cursor over it 3 Item with attribute chart each command for the geometry is shown in this chart Tip: each command can be modified by selecting it's item, pressing the right mouse button and select properties 4 Geometry window shows the geometry model 5 Status line shows system output
5 Discretizer Manual Release date 09/01/10 Side 5 of Example 2.1 Step The Step shows how to create geometry models with Discretizer and make a complete simulation with OpenFOAM. Tip: The complete geometry model is saved in discretizer/discretizer/svn/test/t19_step.dtz 1. Create Point Press the OK Button Select the created Point Tip: it can be also selected by selecting the row of the point in the Item chart
6 Discretizer Manual Release date 09/01/10 Side 6 of Create Cube Enter the cube attributes Tip: x,y,z mesh points defines the number of mesh cells Tip: you can modify the attributes by selecting the row of the cube in the item chart, pressing the right mouse button and selecting Properties Reset the View by pressing the Reset Button in the Icon bar Tip: The model can be rotated by pressing the left mouse Button and moving the mouse inside the geometry window it can be scaled by scrolling with the mouse wheel and you can drag it by pressing the right mouse Button
7 Discretizer Manual Release date 09/01/10 Side 7 of Select the right front face of the cube and choose Create Cube Enter the cube attributes Press the OK Button Tip: the Create Cube dialogue can also be started by selecting the face, pressing the right mouse button and selecting Create Cube 4. Select the upper face of the second cube and choose Create Cube
8 Discretizer Manual Release date 09/01/10 Side 8 of Select the left front face of the first cube and choose BC Create Inlet Enter the Velocity Magnitude and the Direction, 1 is yes 0 is no. Press the OK Button 6. Select the right front face of the second cube and select the right front face of the third cube, choose BC Create Outlet Enter Pressure Press the OK Button Tip: at least one velocity inlet and one pressure outlet is recommended for a simulation
9 Discretizer Manual Release date 09/01/10 Side 9 of File Run Dialog In the Field Case Info: you can define some properties Work Dir: is the directory where the Case will be stored Case Name: Defines the name of this simulation, enter step OpenFOAM Solver: is the solver used by OpenFOAM Scale Factor: is the scale factor the model will be transformed (measures in Discretizer are in mm, measures in OpenFOAM are in m) don't has to be changed Tip: the Field Initial conditions don't has to be changed because they are defined with the Boundary Conditions at the inlet (see Point 5) Start the simulation by pressing the Write and Run Button Tip: have a look at the Terminal Window, some output with Time = and data shows the progress of the calculation The time how long the calculation takes depends on the number of mesh cells you have defined and the power of your computer If End is shown the calculation has finished
10 Discretizer Manual Release date 09/01/10 Side 10 of The result of the simulation can be shown by pressing the Paraview Button Actually nothing is shown At first press the Last Frame Button, or Animation Last frame Now press the highlighted green Apply Button
11 Discretizer Manual Release date 09/01/10 Side 11 of 13 Choose U for velocity from the Icon bar Tip: The model can be rotated by pressing the left mouse Button and moving the mouse inside the geometry window it can be scaled by scrolling with the mouse wheel or pressing the right mouse Button and moving the mouse inside the window up or down and you can drag it by pressing the mouse wheel
12 Discretizer Manual Release date 09/01/10 Side 12 of Press the Clip Button from the Icon bar, press the Z Normal Button and select Inside Out Press the Display Tab, press the Edir Color Map... Button, Press the Color Legend Tab and select Show Color Legend Now you can see the velocity range from the step
13 Discretizer Manual Release date 09/01/10 Side 13 of Choose p for pressure from the Icon bar Press the Display Tab, press the Edir Color Map... Button, Press the Color Legend Tab and select Show Color Legend Now you can see the pressure range from the step
How to make a line graph using Excel 2007
How to make a line graph using Excel 2007 Format your data sheet Make sure you have a title and each column of data has a title. If you are entering data by hand, use time or the independent variable in
More informationOpening a New Case in Client Profiles for Windows (Juris Integration)
C ase Manag e m e n t by C l i e n t P rofiles Opening a New Case in Client Profiles for Windows (Juris Integration) T E C H N O L O G Y F O R T H E B U S I N E S S O F L A W Opening a New Case (New Client)
More informationIn this example, Mrs. Smith is looking to create graphs that represent the ethnic diversity of the 24 students in her 4 th grade class.
Creating a Pie Graph Step-by-step directions In this example, Mrs. Smith is looking to create graphs that represent the ethnic diversity of the 24 students in her 4 th grade class. 1. Enter Data A. Open
More informationChapter 4 Displaying and Describing Categorical Data
Chapter 4 Displaying and Describing Categorical Data Chapter Goals Learning Objectives This chapter presents three basic techniques for summarizing categorical data. After completing this chapter you should
More informationApplying a circular load. Immediate and consolidation settlement. Deformed contours. Query points and query lines. Graph query.
Quick Start Tutorial 1-1 Quick Start Tutorial This quick start tutorial will cover some of the basic features of Settle3D. A circular load is applied to a single soil layer and settlements are examined.
More informationAcrobat PDF Forms - Part 2
Acrobat PDF Forms - Part 2 PDF Form Fields In this lesson, you will be given a file named Information Request Form that can be used in either Word 2003 or Word 2007. This lesson will guide you through
More informationViewing and Troubleshooting Perfmon Logs
CHAPTER 7 To view perfmon logs, you can download the logs or view them locally. This chapter contains information on the following topics: Viewing Perfmon Log Files, page 7-1 Working with Troubleshooting
More informationMaking Visio Diagrams Come Alive with Data
Making Visio Diagrams Come Alive with Data An Information Commons Workshop Making Visio Diagrams Come Alive with Data Page Workshop Why Add Data to A Diagram? Here are comparisons of a flow chart with
More informationCreate Charts in Excel
Create Charts in Excel Table of Contents OVERVIEW OF CHARTING... 1 AVAILABLE CHART TYPES... 2 PIE CHARTS... 2 BAR CHARTS... 3 CREATING CHARTS IN EXCEL... 3 CREATE A CHART... 3 HOW TO CHANGE THE LOCATION
More informationTVM 4155 Numerical modelling and hydraulics 10. March 2014. OpenFOAM homework
TVM 4155 Numerical modelling and hydraulics 10. March 2014 OpenFOAM homework OpenFOAM is the most popular open-source CFD program in the world today. In this homework we will use the program to determine
More informationAdvanced Presentation Features and Animation
There are three features that you should remember as you work within PowerPoint 2007: the Microsoft Office Button, the Quick Access Toolbar, and the Ribbon. The function of these features will be more
More informationSage Timesheet Web Access How To Use Timesheet
View and Enter Hours The majority of your projects, called tasks in Timesheet Professional, have already been set up for you. Because the names of the projects are very long, your view has been changed
More informationFinding Drag Coefficient using Solidworks Flow Simulation
Finding Drag Coefficient using Solidworks Flow Simulation Using solidworks to find the drag coefficient of shapes is a very useful way to cut down on the design time of a project, as it can remove tests.
More informationMICROSOFT OUTLOOK 2010 WORK WITH CONTACTS
MICROSOFT OUTLOOK 2010 WORK WITH CONTACTS Last Edited: 2012-07-09 1 Access to Outlook contacts area... 4 Manage Outlook contacts view... 5 Change the view of Contacts area... 5 Business Cards view... 6
More informationChapter 14: Links. Types of Links. 1 Chapter 14: Links
1 Unlike a word processor, the pages that you create for a website do not really have any order. You can create as many pages as you like, in any order that you like. The way your website is arranged and
More informationAnsur Test Executive. Users Manual
Ansur Test Executive Users Manual April 2008 2008 Fluke Corporation, All rights reserved. All product names are trademarks of their respective companies Table of Contents 1 Introducing Ansur... 4 1.1 About
More informationLearning Module 4 - Thermal Fluid Analysis Note: LM4 is still in progress. This version contains only 3 tutorials.
Learning Module 4 - Thermal Fluid Analysis Note: LM4 is still in progress. This version contains only 3 tutorials. Attachment C1. SolidWorks-Specific FEM Tutorial 1... 2 Attachment C2. SolidWorks-Specific
More informationSteady Flow: Laminar and Turbulent in an S-Bend
STAR-CCM+ User Guide 6663 Steady Flow: Laminar and Turbulent in an S-Bend This tutorial demonstrates the flow of an incompressible gas through an s-bend of constant diameter (2 cm), for both laminar and
More informationPA Payroll Exercise for Intermediate Excel
PA Payroll Exercise for Intermediate Excel Follow the directions below to create a payroll exercise. Read through each individual direction before performing it, like you are following recipe instructions.
More informationHandout: Word 2010 Tips and Shortcuts
Word 2010: Tips and Shortcuts Table of Contents EXPORT A CUSTOMIZED QUICK ACCESS TOOLBAR... 2 IMPORT A CUSTOMIZED QUICK ACCESS TOOLBAR... 2 USE THE FORMAT PAINTER... 3 REPEAT THE LAST ACTION... 3 SHOW
More informationPEMBINA TRAILS SCHOOL DIVISION. Information Technology Department
Information Technology Department Intro to Microsoft PowerPoint 2003 INFORMATION TECHNOLOGY DEPT. Introduction to Microsoft PowerPoint 2003 Ivone B. Kordic Instructional Technology Assistant Information
More informationUsing the Advanced Tier Data Collection Tool. A Troubleshooting Guide
Using the Advanced Tier Data Collection Tool A Troubleshooting Guide Table of Contents Mouse Click the heading to jump to the page Enable Content/ Macros... 4 Add a new student... 6 Data Entry Screen...
More informationDrip Marketing Campaign Manual
Drip Marketing Campaign Manual Released May 2006 Manual for Drip Marketing Campaign: Getting Started 1. Log into www.graphicaldata.com. 2. Hold cursor over the Tools tab. 3. Click on Drip Marketing Campaign.
More informationAB3080 L. Learning Objectives: About the Speaker:
AB3080 L While architects have tested their designs in wind tunnels for many years, the process is typically outsourced to engineering firms and not easily accessible to architects during the conceptual
More informationANSYS CFD-Post Standalone: Tutorials
ANSYS CFD-Post Standalone: Tutorials ANSYS, Inc. Release 12.1 Southpointe November 2009 275 Technology Drive ANSYS, Inc. is Canonsburg, PA 15317 certified to ISO ansysinfo@ansys.com 9001:2008. http://www.ansys.com
More informationCreating Fill-able Forms using Acrobat 8.0: Part 1
Creating Fill-able Forms using Acrobat 8.0: Part 1 The first step in creating a fill-able form in Adobe Acrobat is to generate the form with all its formatting in a program such as Microsoft Word. Then
More informationIntroduction to ANSYS ICEM CFD
Workshop 8.2 3D Pipe Junction 14.5 Release Introduction to ANSYS ICEM CFD 2012 ANSYS, Inc. April 1, 2013 1 Release 14.5 3D Pipe Junction 3D Pipe Junction This is a simple 4-way pipe intersection with two
More informationWebSphere Business Monitor V6.2 Business space dashboards
Copyright IBM Corporation 2009 All rights reserved IBM WEBSPHERE BUSINESS MONITOR 6.2 LAB EXERCISE WebSphere Business Monitor V6.2 What this exercise is about... 2 Lab requirements... 2 What you should
More informationMS Excel. Handout: Level 2. elearning Department. Copyright 2016 CMS e-learning Department. All Rights Reserved. Page 1 of 11
MS Excel Handout: Level 2 elearning Department 2016 Page 1 of 11 Contents Excel Environment:... 3 To create a new blank workbook:...3 To insert text:...4 Cell addresses:...4 To save the workbook:... 5
More informationANSYS CFD-Post Tutorials
ANSYS CFD-Post Tutorials ANSYS, Inc. Southpointe 275 Technology Drive Canonsburg, PA 15317 ansysinfo@ansys.com http://www.ansys.com (T) 724-746-3304 (F) 724-514-9494 Release 15.0 November 2013 ANSYS, Inc.
More informationCFD: What is it good for?
CFD: What is it good for? Tom O Mahoney TNO Fluid Dynamics Introduction to CFD CFD - Computational Fluid Dynamics Computational the using of computers to simulate the physics of fluids Fluid Either gas
More informationSetting your session preferences
What is Aspen? 7 Basic Steps 1 Setting your session preferences 2 Building the simulation 3 Entering the simulation environment 4 Using the workbook 5 Installing Unit Operations 6 Run Your Simulation 7
More informationSTC: Descriptive Statistics in Excel 2013. Running Descriptive and Correlational Analysis in Excel 2013
Running Descriptive and Correlational Analysis in Excel 2013 Tips for coding a survey Use short phrases for your data table headers to keep your worksheet neat, you can always edit the labels in tables
More informationSample Table. Columns. Column 1 Column 2 Column 3 Row 1 Cell 1 Cell 2 Cell 3 Row 2 Cell 4 Cell 5 Cell 6 Row 3 Cell 7 Cell 8 Cell 9.
Working with Tables in Microsoft Word The purpose of this document is to lead you through the steps of creating, editing and deleting tables and parts of tables. This document follows a tutorial format
More informationStep Sheet: Creating a Data Table and Charts
Step Sheet: Creating a Data Table and Charts Using Microsoft Excel Spreadsheets with Data This step sheet will help you build a data table and convert the data into histograms and circle graphs for your
More informationCHAPTER 6: SEARCHING AN ONLINE DATABASE
CHAPTER 6: SEARCHING AN ONLINE DATABASE WHAT S INSIDE Searching an Online Database... 6-1 Selecting a Display Mode... 6-1 Searching a Database... 6-1 Reviewing References... 6-2 Finding Full Text for a
More informationMicrosoft Access 2007
How to Use: Microsoft Access 2007 Microsoft Office Access is a powerful tool used to create and format databases. Databases allow information to be organized in rows and tables, where queries can be formed
More informationWorking with Video in PowerPoint 2010
518 442-3608 Working with Video in PowerPoint 2010 Adding video to a PowerPoint presentation can be very useful. In this handout we will explore many of the program s video options. When you start PowerPoint
More informationPetrel TIPS&TRICKS from SCM
Petrel TIPS&TRICKS from SCM Maps: Knowledge Worth Sharing Map Annotation A map is a graphic representation of some part of the earth. In our industry, it may represent either the surface or sub surface;
More informationClick on various options: Publications by Wizard Publications by Design Blank Publication
Click on various options: Publications by Wizard Publications by Design Blank Publication Select the Blank Publications Tab: Choose a blank full page Click on Create New Page Insert > Page Select the number
More informationMicrosoft Access 2000
Microsoft Access 2000 Level 1 Region 4 Teaching, Learning and Technology Center Kaplan, LA Activity 1 Creating a Database 1. Open Microsoft Access 2000 a. Click on START, highlight Programs, point and
More informationSet up and solve a transient problem using the pressure-based solver and VOF model.
Tutorial 18. Using the VOF Model This tutorial was run using ANSYS FLUENT 12.1. The results have been updated to reflect the change in the default setting of node-based smoothing for the surface tension
More information1 Global Warranty Service Agent Guide. Service Agent Help Guide. Service Agent Starts the Claim
1 Global Warranty Service Agent Guide Service Agent Help Guide Service Agent Starts the Claim 1 2 Global Warranty Service Agent Guide Table of Contents Warranty Guidelines... 3 Entering a Claim... 4 Log
More informationVersion 4.1 USER S MANUAL Technical Support (800) 870-1101
ESSENTIAL FORMS Version 4.1 USER S MANUAL Technical Support (800) 870-1101 401 Francisco St., San Francisco, CA 94133 (800) 286-0111 www.essentialpublishers.com (c) Copyright 2004 Essential Publishers,
More informationQuick Start Using DASYLab with your Measurement Computing USB device
Quick Start Using DASYLab with your Measurement Computing USB device Thank you for purchasing a USB data acquisition device from Measurement Computing Corporation (MCC). This Quick Start document contains
More informationAIM Dashboard-User Documentation
AIM Dashboard-User Documentation Accessing the Academic Insights Management (AIM) Dashboard Getting Started Navigating the AIM Dashboard Advanced Data Analysis Features Exporting Data Tables into Excel
More informationCreating and Using Links and Bookmarks in PDF Documents
Creating and Using Links and Bookmarks in PDF Documents After making a document into a PDF, there may be times when you will need to make links or bookmarks within that PDF to aid navigation through the
More informationCreating tables of contents and figures in Word 2013
Creating tables of contents and figures in Word 2013 Information Services Creating tables of contents and figures in Word 2013 This note shows you how to create a table of contents or a table of figures
More informationChapter 9 Slide Shows
Impress Guide Chapter 9 Slide Shows Transitions, animations, and more Copyright This document is Copyright 2007 2013 by its contributors as listed below. You may distribute it and/or modify it under the
More informationWinCC. Configuration Manual. Manual Volume 2
WinCC Configuration Manual Manual Volume 2 This manual is part of the documentation package with the order number: 6AV6392-1CA05-0AB0 Release: September 1999 WinCC, SIMATIC, SINEC, STEP are trademarks
More informationOpenFOAM Opensource and CFD
OpenFOAM Opensource and CFD Andrew King Department of Mechanical Engineering Curtin University Outline What is Opensource Software OpenFOAM Overview Utilities, Libraries and Solvers Data Formats The CFD
More informationMicrosoft PowerPoint 2008
Microsoft PowerPoint 2008 Starting PowerPoint... 2 Creating Slides in Your Presentation... 3 Beginning with the Title Slide... 3 Inserting a New Slide... 3 Slide Layouts... 3 Adding an Image to a Slide...
More informationDESIGN A WEB SITE USING PUBLISHER Before you begin, plan your Web site
Page 1 of 22 DESIGN A WEB SITE USING PUBLISHER Before you begin, plan your Web site Before you create your Web site, ask yourself these questions: What do I want the site to do? Whom do I want to visit
More informationAdvanced Microsoft Excel 2010
Advanced Microsoft Excel 2010 Table of Contents THE PASTE SPECIAL FUNCTION... 2 Paste Special Options... 2 Using the Paste Special Function... 3 ORGANIZING DATA... 4 Multiple-Level Sorting... 4 Subtotaling
More informationGetting Started With DraftSight A Guide For AEC Users
Getting Started With DraftSight A Guide For AEC Users DraftSight.com Facebook.com/DraftSight Welcome to DraftSight a valuable tool for any AEC professional! DraftSight is more than a free, professional-grade
More informationPiston Ring. Problem:
Problem: A cast-iron piston ring has a mean diameter of 81 mm, a radial height of h 6 mm, and a thickness b 4 mm. The ring is assembled using an expansion tool which separates the split ends a distance
More informationOpen Source Computational Fluid Dynamics
Open Source Computational Fluid Dynamics An MSc course to gain extended knowledge in Computational Fluid Dynamics (CFD) using open source software. Teachers: Miklós Balogh and Zoltán Hernádi Department
More informationUsing Adobe Dreamweaver CS4 (10.0)
Getting Started Before you begin create a folder on your desktop called DreamweaverTraining This is where you will save your pages. Inside of the DreamweaverTraining folder, create another folder called
More informationGetting Started Guide. Chapter 14 Customizing LibreOffice
Getting Started Guide Chapter 14 Customizing LibreOffice Copyright This document is Copyright 2010 2012 by its contributors as listed below. You may distribute it and/or modify it under the terms of either
More informationJoomla! 2.5.x Training Manual
Joomla! 2.5.x Training Manual Joomla is an online content management system that keeps track of all content on your website including text, images, links, and documents. This manual includes several tutorials
More informationFastTrack Schedule 10. Tutorials Manual. Copyright 2010, AEC Software, Inc. All rights reserved.
FastTrack Schedule 10 Tutorials Manual FastTrack Schedule Documentation Version 10.0.0 by Carol S. Williamson AEC Software, Inc. With FastTrack Schedule 10, the new version of the award-winning project
More informationIntroduction to Autodesk Inventor for F1 in Schools
Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy
More informationEntering the example employee satisfaction survey in Survey Crafter Professional s Survey Designer window
Survey Crafter, Inc. Survey Crafter Walkthrough Summary: Walkthrough: Applies to: Topic: Synopsis This tutorial walks you through entering the example employee satisfaction survey in Survey Crafter Professional
More informationAccess to Moodle. The first session of this document will show you how to access your Lasell Moodle course, how to login, and how to logout.
Access to Moodle The first session of this document will show you how to access your Lasell Moodle course, how to login, and how to logout. 1. The homepage of Lasell Learning Management System Moodle is
More informationGlogster.com. Type code from box above
Glogster.com A glog is like a poster, only better. Glogs allow you to create an online poster using photographs, images, graphics, video files and sound files. Glogs allow you to add hyperlinks to other
More informationGETTING STARTED WITH DIALux (A Very Rough Guide) Rev. 6
1. Scaling your project drawing for import into DIALux using AutoCAD 2004 OR DraftSight, (procedure is similar in AutoCAD 2014 but you will need to access the commands through the ribbon interface): a)
More informationEXCEL PIVOT TABLE David Geffen School of Medicine, UCLA Dean s Office Oct 2002
EXCEL PIVOT TABLE David Geffen School of Medicine, UCLA Dean s Office Oct 2002 Table of Contents Part I Creating a Pivot Table Excel Database......3 What is a Pivot Table...... 3 Creating Pivot Tables
More informationMacros in Word & Excel
Macros in Word & Excel Description: If you perform a task repeatedly in Word or Excel, you can automate the task by using a macro. A macro is a series of steps that is grouped together as a single step
More informationGelAnalyzer 2010 User s manual. Contents
GelAnalyzer 2010 User s manual Contents 1. Starting GelAnalyzer... 2 2. The main window... 2 3. Create a new analysis... 2 4. The image window... 3 5. Lanes... 3 5.1 Detect lanes automatically... 3 5.2
More informationOhio University Computer Services Center August, 2002 Crystal Reports Introduction Quick Reference Guide
Open Crystal Reports From the Windows Start menu choose Programs and then Crystal Reports. Creating a Blank Report Ohio University Computer Services Center August, 2002 Crystal Reports Introduction Quick
More informationAdobe Dreamweaver - Basic Web Page Tutorial
Adobe Dreamweaver - Basic Web Page Tutorial Window Elements While Dreamweaver can look very intimidating when it is first launched it is an easy program. Dreamweaver knows that your files must be organized
More informationSolar-Generation Data Visualization Software Festa Operation Manual
Solar-Generation Data Visualization Software Festa Operation Manual Please be advised that this operation manual is subject to change without notice. FL-003 CONTENTS INTRODUCTION Chapter1: Basic Operations
More informationMS Word 2007 practical notes
MS Word 2007 practical notes Contents Opening Microsoft Word 2007 in the practical room... 4 Screen Layout... 4 The Microsoft Office Button... 4 The Ribbon... 5 Quick Access Toolbar... 5 Moving in the
More informationUnderstand the Sketcher workbench of CATIA V5.
Chapter 1 Drawing Sketches in Learning Objectives the Sketcher Workbench-I After completing this chapter you will be able to: Understand the Sketcher workbench of CATIA V5. Start a new file in the Part
More informationCREATING EXCEL PIVOT TABLES AND PIVOT CHARTS FOR LIBRARY QUESTIONNAIRE RESULTS
CREATING EXCEL PIVOT TABLES AND PIVOT CHARTS FOR LIBRARY QUESTIONNAIRE RESULTS An Excel Pivot Table is an interactive table that summarizes large amounts of data. It allows the user to view and manipulate
More informationSmart Board Notebook Software A guide for new Smart Board users
Smart Board Notebook Software A guide for new Smart Board users This guide will address the following tasks in Notebook: 1. Adding shapes, text, and pictures. 2. Searching the Gallery. 3. Arranging objects
More informationMicrosoft Access 2007 Introduction
Microsoft Access 2007 Introduction Access is the database management system in Microsoft Office. A database is an organized collection of facts about a particular subject. Examples of databases are an
More informationIntroduction to Macromedia Dreamweaver MX
Introduction to Macromedia Dreamweaver MX Macromedia Dreamweaver MX is a comprehensive tool for developing and maintaining web pages. This document will take you through the basics of starting Dreamweaver
More informationWEBFOCUS QUICK DATA FOR EXCEL
WEBFOCUS QUICK DATA FOR EXCEL BRIAN CARTER INFORMATION BUILDERS SUMMIT 2008 USERS CONFERENCE JUNE 2008 Presentation Abstract: Even with the growing popularity and evolvement of Business Intelligence products
More informationMac Outlook Calendar/Scheduler and Tasks
Introduction Schedule an event and/or meeting. Schedule all-day and recurring events. Assign tasks to another user and use special shortcut keys. Contents Introduction Contents Calendar View Edit an appointment
More informationMicrosoft Excel 2013: Macro to apply Custom Margins, Titles, Gridlines, Autofit Width & Add Macro to Quick Access Toolbar & How to Delete a Macro.
Microsoft Excel 2013: Macro to apply Custom Margins, Titles, Gridlines, Autofit Width & Add Macro to Quick Access Toolbar & How to Delete a Macro. Do you need to always add gridlines, bold the heading
More informationBasic Microsoft Excel 2007
Basic Microsoft Excel 2007 The biggest difference between Excel 2007 and its predecessors is the new layout. All of the old functions are still there (with some new additions), but they are now located
More informationPowerPoint. Basics. Project
PowerPoint 2010 Basics Project PRESENTED BY THE TECHNOLOGY TRAINERS OF THE MONROE COUNTY LIBRARY SYSTEM EMAIL: TRAININGLAB@MONROE.LIB.MI.US MONROE COUNTY LIBRARY SYSTEM 734-241-5770 840 SOUTH ROESSLER
More informationIntroduction to Microsoft Word 2008
1. Launch Microsoft Word icon in Applications > Microsoft Office 2008 (or on the Dock). 2. When the Project Gallery opens, view some of the available Word templates by clicking to expand the Groups, and
More informationThe corresponding control ladder program is shown at below: The content of element comment will be built is shown below
Introduction This tutorial explains how to build an application by using the Winproladder programming package to write a ladder control program. In this tutorial we will not tackle the advanced features
More informationCreating a PowerPoint Poster using Windows
Creating a PowerPoint Poster using Windows Copyright 2001 Michael Dougherty (michael@nmsu.edu) Purpose The purpose of this tutorial is to illustrate how to create a 3 x 4 ft. poster using PowerPoint. This
More informationCDOT Monumentation Sheets
CDOT Monumentation Sheets This document describes the process used to assemble a Right of Way Monumentation Sheet. An InRoads XML report is used to display the required data from the geometry project.
More informationAODA Mouse Pointer Visibility
AODA Mouse Pointer Visibility Mouse Pointer Visibility Helpful if you have trouble viewing the mouse pointer. Microsoft Windows based computers. Windows XP Find the pointer 1. Click the Start button or
More informationMicrosoft Outlook 2007 Calendar Features
Microsoft Outlook 2007 Calendar Features Participant Guide HR Training and Development For technical assistance, please call 257-1300 Copyright 2007 Microsoft Outlook 2007 Calendar Objectives After completing
More informationAnalyzing Excel Data Using Pivot Tables
NDUS Training and Documentation Analyzing Excel Data Using Pivot Tables Pivot Tables are interactive worksheet tables you can use to quickly and easily summarize, organize, analyze, and compare large amounts
More informationSketchUp Instructions
SketchUp Instructions Every architect needs to know how to use SketchUp! SketchUp is free from Google just Google it and download to your computer. You can do just about anything with it, but it is especially
More informationAdobe Acrobat X Pro Creating & Working with PDF Documents
Adobe Acrobat X Pro Creating & Working with PDF Documents Overview Creating PDF documents is useful when you want to maintain the format of your document(s). As a PDF document, your file maintains its
More informationWorkshop. Tennis Racket Simulation using Abaqus
Introduction Workshop Tennis Racket Simulation using Abaqus In this workshop you will become familiar with the process of creating a model interactively by using Abaqus/CAE. You will create the tennis
More informationPlotting: Customizing the Graph
Plotting: Customizing the Graph Data Plots: General Tips Making a Data Plot Active Within a graph layer, only one data plot can be active. A data plot must be set active before you can use the Data Selector
More informationHow to Excel with CUFS Part 2 Excel 2010
How to Excel with CUFS Part 2 Excel 2010 Course Manual Finance Training Contents 1. Working with multiple worksheets 1.1 Inserting new worksheets 3 1.2 Deleting sheets 3 1.3 Moving and copying Excel worksheets
More informationUsing the Findlay City Schools Help Desk Program. This document describes how to submit a helpdesk request into the new system for the first time.
Using the Findlay City Schools Help Desk Program This document describes how to submit a helpdesk request into the new system for the first time. In order to submit a helpdesk request you will need to
More informationFaculty Access for the Web 7 - New Features and Enhancements
Faculty Access for the Web 7 - New Features and Enhancements New Design...................................................................... 2 Alerts............................................................................
More informationMICROSOFT WORD TUTORIAL
MICROSOFT WORD TUTORIAL G E T T I N G S T A R T E D Microsoft Word is one of the most popular word processing programs supported by both Mac and PC platforms. Microsoft Word can be used to create documents,
More informationNAVIGATION TIPS. Special Tabs
rp`=j~êëü~ää=påüççä=çñ=_ìëáåéëë Academic Information Services Excel 2007 Cheat Sheet Find Excel 2003 Commands in Excel 2007 Use this handout to find where Excel 2003 commands are located in Excel 2007.
More informationPage Numbering for a Thesis or Dissertation
Page Numbering for a Thesis or Dissertation Tip: Add Page Numbering to your document after you are finished making all edits. After the page numbering has been added, then add the Table of Contents and/or
More information