GM POWERGLIDE PERFORMANCE PARTS

Transcription

1 Powerglide Super Pump Product #743400PH Superior Transbrake operation at low rpm. * Billet Aluminum Pump Body. * 20% lighter than the Stock Pump. (11.5 lbs. versus 14.4 lbs.) * Positive Stop Bushing area - prevents the bushing from moving forward. * Area for Staking Bushing - prevents bushing spin. * Snap Ring to prevent seal blow-out. * Lube reliefs on outer gear pockets provide superior lubrication. * Stator Tube made from solid heat treated 4140 steel - This tube will NEVER "Spin Out" as often happens with press-in designs. * All Pump Bodies will interchange with stock support. Powerglide Pump Stator Tube Product #743400ST * Stator Tube made from solid heat treated 4140 steel. Aluminum Stator Back c/w O-Rings Product #743400SB * Billet aluminum body. TCS Powerglide Pump Body & Gears Product #743400BH * Billet Aluminum Body. TCS Regular Volume Powerglide Pump Product #743400P * CNC Machined Billet Aluminum Body, New Stator Tube - will last a lifetime! PG Ringless Input Shaft & Stator Assembly Product #K743400RS * TCS manufactures this Input Shaft using Aermet 100 high strength, fractur resistant steel. * By deleting the ring grooves & modifying the lube holes we can attest to having the strongest Input Shaft on the market. * Kit includes a new billet aluminum Stator Back and one piece 4140 steel St * The kit is a 100% bolt in for the O.E.M Pump as well as TCS's PG Super Pump th Street, Langley, BC. Canada V2Y 1N7 Page 1

2 Race Prepped Reconditioned Powerglide Stator Tube & Back Product #R28154B This refurbished pump is completely rebuilt, and modified for performance applications. * New Bushings and Seals. * Welded Stator Tube to prevent spin-out. * Torrington Bearing for High Clutch Drum Support. Turbo Spline Hardened Input Shaft Product # CNC precision machined by TCS from a "SUPERIOR" specialty steel. * Increased shaft diameters for added strength. * Extra large radii have been machined at all possible high fracture ar * Machined to enhance cooling circuit and lubrication. * This Input Shaft is recommended for those with 600 or MORE horsepowe Steel 1:80 Ratio Straight Cut Planetary Gears Product #2540S Planetary Gear Set with all pinion gears, center gear, auxiliary gears and flange gear are housed in a steel carrier. * This low 1:80 ratio Planetary Gear Set is excellent for racing applications and is available in standard length and shorty applications. * Other ratios also available - call for information. * Call for pricing Output Shaft Support c/w Bearing Product # TCS's Output Support helps to eliminate unwanted weight and reduces rotational friction by utilizing lightweight billet aluminum and, replacing the traditional bushing with a needle bearing. * The TCS Output Support has been designed for race applications. * This Output Support Shaft is 53% lighter than the stock unit lb versus 2.35 lbs. Extra Wide Racing Band Product # This band comes with a Tough Red Lining. Powerglide High Energy Band Product # High Energy Lining th Street, Langley, BC. Canada V2Y 1N7 Page 2

3 Shorty Housing c/w Bearing... Product # Manufactured from solid T6 aluminum. * This unit utilizes a Low Drag Needle Bearing and, comes complete with all bolts, washers and gasket. * The Snap Ring Seal and Bearing have been added for safety. * Will Retro-Fit to ALL Powerglide transmission cases - Reid, ATI and JW. Standard PG Steel Clutch Hub... Product #748300S The Standard Powerglide Clutch Hub is manufactured at TCS from heat treated steel. * Oil relief holes have been slotted to reduce rotational weight. This unit has been manufactured to be used in engines producing up to 1,200 HP. * It can also be used with any combination of Raybestos Blue Plates. * Will retro fit to stock Powerglide drums and accept up to 8 Alto Red Eagle friction plates. Long Steel Clutch Hub for 9 Clutches... Product #748300SL Manufactured by TCS from Heat Treated Steel. This unit has been designed to be used in engines producing up to 1,200 HP. * Oil relief holes have been slotted to reduce rotational weight. * When used in combination with the TCS High Clutch Drum Piston (Part# PS) the Long Steel Hub will accommodate 9 Alto Red Eagle Frictions for a yield of 15% more clutch area! * Can be used with any combination of Raybestos Blue Plates. * Will retrofit to stock Powerglide Drums and accept up to 8 Alto Red Eagle Frictions. PG Large Piston Steel DrumDrum... Product #743920SH (Also available as a complete kit #K743920SH) 29% More Piston Apply Area! This aluminum Piston delivers the most clamping force available today. * 9 or 10 Plate design. * Dual Apply Feed Slots. * 100% Drop-in assembly. Large Piston Steel Clutch Drum Kit... Product #K743920SH (Also available in Drum and Piston Only...Product #: SH) Kit includes: Aluminum Clutch Piston with 29% More Piston Apply Area, 10-Steels, 9-Frictions, 24 Springs, Spring Retainer, 1-Snap Ring, 1-Large Wear Plate, 1-Small Wear Plate, 1-Clutch Hub th Street, Langley, BC. Canada V2Y 1N7 Page 3

4 PG Aluminum High Gear Clutch Drum... Product #743920A * Our all new 2nd Generation High Gear Aluminum Clutch Drum is made from T6 solid aluminum and has been built to allow the use of up to 9 clutches. * The FIRST New Billet Piston made from T6 aluminum designed with built-in ANTI SPIN TABS. This EXTRA SHORT Piston allows you to use up to 9 clutches. * A FIRST to come with a "REPLACEABLE" Bushing/Sealing Ring Sleeve (Part# AB) made from 660 bearing bronze with a spiral lubrication channel. * Drum weighs 2.18 lbs. versus 5.90 lbs. for the O.E. drum. Powerglide Steel High Clutch Drum - Holds 9 Clutches... Product #743920S (Also available as a complete kit K743920S) * This unit offers greater clutch performance. * Can hold up to 9 Alto Red Eagle Clutch Plates. Extra Short Aluminum Clutch Piston... Product #744000PS Designed to be used with the TCS PG Clutch Drum and Hub assembly (Part# K743920S). * CNC machined from T6 billet aluminum. * Lighter than conventional Powerglide Clutch Pistons. PG Steel Drum Kit... Product #K743920S This Kit offers exceptional performance and strength. * The Steel Clutch Drum Kit contains 9 Alto Red Eagle Clutch Plates. * 15% greater Clutch area than the 7 & 8 plate Clutch Packs. * T6 billet aluminum Clutch Piston, Steel Clutch Hub, all Steels, Springs, and Retainers. * Can accommodate up to 1,600 HP Engines. PG Complete High Gear Aluminum Clutch Drum Kit... Product #K743920A NEW 2nd generation High Gear Aluminum Clutch Drum is made from T6 billet aluminum. Will accommodate 9 Frictions. * One TCS CNC machined Steel Clutch Hub. * One Extra Short Billet Aluminum Piston designed with Anti-Spin Tabs. * A "Replaceable" Bushing/Sealing Ring Sleeve made from 660 Bearing Bronze with a spiral lubrication channel - a TCS FIRST! * One Spring Retainer. * 10 Turbulator Kolene Steel Plates. * 9 Alto Red Eagle Frictions. * 24 Springs th Street, Langley, BC. Canada V2Y 1N7 Page 4

5 Black Anodized Servo Cover Product #728000B A nice "Dress-Up" item for your Powerglide. * Made from solid T6 billet aluminum, lighter than the stock servo cover. * Kit includes bolts and gasket. Dual Sealing Ring Servo Piston Product #723001S * Zero leakage billet aluminum Dual Sealing Ring Servo Piston. Deluxe Racing Master Overhaul Kit Product #749000DL * The Deluxe Racing Master Kit contains all Bushings, Seals, Gaskets, Alto Reds, Kolene Steels and Band. A complete Overhaul Kit! Racing Master Overhaul Kit - Alto Reds & Kolenes Product # * Our Standard Powerglide Racing Master Overhaul kit contains all Gaskets, Seals, Alto Reds, and Kolene Steels. Racing Master Overhaul Kit w/c Direct Powerpack Product #749000P * Includes Gasket and Seal Kit, Red Racing Frictions and Kolene steels. Kit contains High Temperature Seals. Overhaul Kit Product #K11900A * Includes Gasket and Seal Kit, full Sealing Ring Kit, front and rear Seals. Racing Overhaul Kit Product #K11900HP * Includes Gasket and Seal Kit, full Sealing Ring Kit, front and rear Seals- Kit has HighTemperature Seals. Reid PG Transmission Case Product #PG-1000L * Cast from aircraft grade 356 aluminum this case has been designed with an interior safety liner that negates the need for an external transmission shield. * The bellhousing is SFI 30.1 certified and, does not require a flexplate shield. Reid PG Extension Housing Product #PG th Street, Langley, BC. Canada V2Y 1N7 Page 5