1 T Bearing ball, thrust swashplate TAI Bearing and liner assembly ASI * Ring assembly, swashplate, gimbal ASI * Ring, inner, swashplate ASI * Ring assembly, outer, swashplate ASI * Support assembly, swashplate TAI Shim TAI Sleeve, bearing inner race TAI Liner, outer ring TAI Cap, outer race bearing retainer TAI Cap, inner race bearing retainer TAI Cover, swashplate bearing TAI Shim, inner ring swashplate TAI Plate TAI Plate Swashplate and Support Assembly TAI Plate TAI Plate TAI Spacer, inner swashplate assembly TAI Bushing TAI Bushing, support assembly TAI Bushing, support assembly
2 ASI * Sleeve, collective AL Bearing, scissor and sleeve AL Bearing, scissor and sleeve TAI Liner, bearing rotating controls TAI Inner race, drive link bearing TAI Liner, bearing scissors pivot TAI Scissor assembly TAI Housing assembly, drive link thrust Scissor and Sleeve Assembly TAI Bearing and liner assembly TAI Liner, collective sleeve Pending FAA approvals.
3 TAI Cone set, main rotor trunnion TAI Reservoir, main rotor trunnion TAI Bushing TAI Bushing TAI Nut, mast, M/R ASI * Nut, retention strap, main rotor ASI * Pitch horn assembly, main rotor ASI * Grip assembly, main rotor ASI * Grip assembly, main rotor ASI * Grip assembly, main rotor TAI Ring, backup TAI Plate, grip main rotor TAI Universal control link, main rotor TAI Liner TAI Liner ASI * Bushing, pillow block ASI * Clevis, pitch change, M/R TAI Barrel-control link, pitch change ASI * Barrel, drag brace assembly TAI Barrel, drag brace assembly TAI Decal, barrel drag brace assembly TAI Radius ring trunnion, main rotor ASI * Bolt-blade main rotor TAI Nut, blade main rotor TAI Bolt, drag brace TAI Bolt, drag brace ASI * Bolt, pillow block ASI * Fitting, drag brace assembly ASI * Fitting, drag brace assembly ASI * Fitting retention strap, inboard, M/R ASI * Fitting retention strap, outboard, M/R ASI * Fitting retention strap, outboard, M/R TAI Nut, yoke, M/R TAI Sleeve, seal TAI Shield, shield assembly, M/R TAI Static stop, M/R Main Rotor Hub For more information, contact Rich Ritter at or Aerospace Aftermarket Customer Service
4 TAI Shaft-bearing, planetary pinion TAI Race-bearing, planetary pinion TAI Sleeve assembly, hyd pump quill TAI Sleeve assembly, hyd pump quill TAI Spacer, T/R drive quill TAI Case-top, transmission assembly TAI Case-support, bevel gear, trans TAI Glass, sight gage, oil gearbox Transmission TAI Plate assembly TAI Bolt, bearing shaft, lower planetary TAI Housing, jet, planetary, trans
5 ASI * Grip assembly, tail rotor Miscellaneous TAI Shaft, tail rotor, 90 degree G/B TAI Glass, sight gage, oil gearbox TAI Clevis, control tube, T/R TAI Race-controls T/R TAI Bushing, controls T/R TAI Control tube T/R TAI Tube, T/R controls TAI Bolt, lift link TAI Clamp, curvic T/R TAI Hanger-drive TAI Plate assembly For more information, contact Rich Ritter at or Aerospace Aftermarket Customer Service TAI Cap assembly filler, oil gearbox TAI Support, 5th mount, transmission TAI Spacer, bolt, lift link, trans TAI Spacer, bolt, lift link, trans TAI Bolt, lift link TAI Bolt, lift link TAI Bolt, isolation mount - pylon TAI Crosshead controls TAISGT SGT522-2 Wingshaft
The weight of an aircraft and its balance are extremely important for operating an aircraft in a safe and efficient manner. When a manufacturer designs an aircraft and the Federal Aviation Administration
MARK MARCA REGISTRADA DE CLARK EQUIPMENT COMPANY U.S.A. PARTS MANUAL P11/1 092 M 125C TRACTOR SHOVEL Record Your Machine Serial Number Here Fabricado sob Iicenca por: CUIRK Equipamentos Clark Ltda. Praca
HOME/GARDEN Use to loosen rusty nuts and screws, clean garden tools Cleans piano keys Keeps wicker chairs from squeaking Lubricates small rolling toys Keeps garden tools rust-free Cleans patio door glide
www.transport.nsw.gov.au Transport NSW TWO DOOR CITY BUS - BUS SPECIFICATION Outer and Metropolitan Bus System Contract (O/MBSC) November 2010 Sydney Region: Transport NSW Transport Services Division Level
BUYERS GUIDE IMPORTANT: Spoken promises are difficult to enforce. Ask the dealer to put all promises in writing. Keep this form. VEHICLE MAKE MODEL YEAR VIN NUMBER DEALER STOCK NUMBER (Optional) WARRANTIES
OR Products 1-800-962-9888 1-800-962-9888 All products featured in this catalog are latex-free. The products shown in this catalog may not be licensed or registered in all parts of the world. Please contact
HOW TO MAKE YOUR OWN ARCHERY EQUIPMENT How to make your own equipment Page 1 Contents: How to:- 1. Make your own bow handle (riser).... Page 3 2. Make your own bow limbs.... Page 6 3. Make your own string....
Mark One Control Valves Body Assembly Fail-safe spring Heavy Guiding Two widely spaced guides on large-diameter stem. Plug does not guide in retainer O S High Thrust Cylinder Actuator Three standard sizes
Aircraft fluid lines are usually made of metal tubing or flexible hose. Metal tubing (also called rigid fluid lines) is used in stationary applications and where long, relatively straight runs are possible.
WASHINGTON, D.C. 20594. z AIRCRAFT ACCl ENT REPQRT AMERNAN AIRLIWES, INC., E DC-10-10, NllOAA CHICAGO-B'HARE INTERNATIONIIL AIRPORT CHICAGO. 1ltfMftS. I $1 UNITED STATES GGVERNMENT i,. TECHNICAL REPORT
I Rules for Classification and Construction Ship Technology 3 Special Craft 3 Yachts and Boats up to 24 m Edition 2003 The following Rules come into force on October 1 st, 2003 Alterations to the preceding
What Every Member of the Trade Community Should Know About: Base Metal Mountings and Fittings AN INFORMED COMPLIANCE PUBLICATION JANUARY 2010 NOTICE: This publication is intended to provide guidance and
NONRESIDENT TRAINING COURSE June 1992 Tools and Their Uses NAVEDTRA 14256 DISTRIBUTION STATEMENT A : Approved for public release; distribution is unlimited. Although the words he, him, and his are used
CIRCULAR SAWMILLS AND THEIR EFFICIENT OPERATION by Stanford J. Lunstrum U.S. DEPARTMENT OF AGRICULTURE FOREST SERVICE STATE & PRIVATE FORESTRY CIRCULAR SAWMILLS AND THEIR EFFICIENT OPERATION by Stanford
Owner s Operator and Maintenance Manual Get-U-Up Lift DEALER: This manual MUST be given to the user of the patient lift. USER: BEFORE using this patient lift, read this manual and save for future reference.
P65C13 For Model: M65C13 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
International Classification for Standards Contents Introduction...3 Purpose of the ICS...3 Description of the ICS...3 Rules for the use of the ICS...5 Updating of the ICS...11 How to use the ICS index...11
KE-430FX KE-430FS BE-438FX INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. ELECTRONIC DIRECT DRIVE LOCKSTITCH BAR TACKER
THK Base Isolation Catalog - Technical Book Base Isolation of Buildings THK s base isolation systems are capable of achieving base isolation even with lightweight buildings and towering buildings, whose
DESPIECE / PART LIST LISTE DE PIÈCES SM-105 MOTORES DIESEL MARINOS MARINE DIESEL ENGINES MOTEURS MARINS DIESEL CATALOGO DE RECAMBIOS NORMAS PARA EL PEDIDO: Para obtener un servicio rápido y eficaz, los
Compacted Road Base and Subbase Soils INTRODUCTION When highway or railway earthworks, bases, subbases and dams are constructed and subgrades are prepared, it is necessary to compact the material mechanically,
The Industrial Choice. Centrifugal DW Propeller GAS-FIRED AIR MAKE-UP UNITS Axial Flow & Centrifugal Direct Digital Control (DDC) Systems BULLETIN 864-A September 1999 Introduction What is make-up air?