List of Technical Services
|
|
|
- Rebecca Craig
- 7 years ago
- Views:
Transcription
1 CONSTRUCTION MATERIAL TESTING CONCRETE C31 T C39 T C143 T C231 T C42 T C1140 N/A N/A C803 N/A N/A E1155 N/A N/A C805 N/A N/A C293 T177 N/A C172 T C1064 N/A N/A C173 T C192 T126 N/A C138 T C617 T231 N/A C1231 N/A N/A C78 T C496 T198 N/A C174 T C457 N/A N/A C856 N/A N/A N/A T260 N/A N/A T271 N/A F1869 N/A N/A Making and Curing Concrete Test Specimens in the Field Compressive Strength of Cylindrical Concrete Specimens Slump of Hydraulic Cement Concrete Air Content of Freshly Mixed Concrete by Pressure Method Obtaining and Testing Drilled Concrete Cores Preparing and Testing Specimens from Shotcrete Test Panels In-Place Strength Analysis using the Windsor Probe System Determining Floor Flatness F f and Floor Levelness F L Numbers In-Place Strength Analysis using the Schmidt Hammer System Flexural Strength of Molded Concrete Beams (Simple Beam with Center-Point Loading) Sampling Freshly Mixed Concrete Temperature of Freshly Mixed Concrete Air Content of Freshly Mixed Concrete by Volumetric Method Making and Curing Concrete Test Specimens in the Laboratory Unit Weight, Yield and Air Content of Concrete Capping Cylindrical Concrete Specimens Use of Unbonded Caps for Compressive Strength of Concrete Cylinders Flexural Strength of Molded Concrete Beams (Simple Beam with Third-Point Loading) Splitting Tensile Strength of Cylindrical Specimens Measuring Length of Drilled Concrete Cores Microscopial Determination of the Air-Void System in Hardened Concrete (Sub-Contracted) Petrographic Examination of Hardened Concrete (Sub-Contracted) Sampling for Chloride Ion in Concrete and Concrete Raw Materials In-Place reinforcing Steel Location (pachometer) Concrete Mix Design Verification Density of Plastic and Hardened Portland Cement Concrete by Nuclear Methods Concrete Subfloor Vapor Emission Rate Page 1 of 11 Pages
2 CONSTRUCTION MATERIAL TESTING (Continued) Compaction and Moisture Density Relationship D6938 T D6938 T D698 T D1557 T180 N/A D4718 T D1556 T D4253 N/A N/A D4254 N/A N/A Density of Soil and Soil-Aggregate In-Place by Nuclear Methods (Compaction Testing) Moisture Content of Soil and Soil-Aggregate In-Place by Nuclear Methods Moisture Density Relations of Soils Using 5.5 lb. Rammer and 12 in. Drop (Standard Proctor) Moisture Density Relations of Soils Using 10.0 lb. Rammer and 18 in. Drop (Modified Proctor) Correction for Coarse Particles in the Soil Compaction Test Density of Soil In-Place by the Sand-Cone Method Maximum Index Density and Unit Weight of Soil (Relative Density) Minimum Index Density and Unit Weight of Soil (Relative Density) Soil Properties and Classification D2487 N/A N/A D422 T88 N/A D2216 T265 N/A A674 N/A N/A N/A N/A 133 D421 T87 N/A D2217 T146 N/A D4972 N/A N/A D854 T100 N/A D1140 N/A N/A D4318 T89 N/A D4318 T90 N/A N/A M145 N/A C400 N/A N/A D4644 N/A N/A Classification of Soils for Engineering Purposes (USCS) Particle Size Analysis of Soils / Hydrometer Laboratory Determination of Moisture Content of Soils Corrosion Potential Series (Oxidation Reduction Potential) Soil Resistivity (PennDOT Methods) Dry Preparation of Disturbed Soil and Soil Aggregate Samples Wet Preparation of Disturbed Soil Samples for Test ph of Soils Specific Gravity of Soils Amount of Material in Soils Finer than the #200 Sieve Determining the Liquid Limit of Soils Determining the Plastic Limit and Plasticity Index of Soils Classification of Soils for Highway Construction Purposes Textural Classification of Soils - United States Department of Agriculture (USDA) Acid Neutralization Slake Durability Index of Shale and Similar Weak Rock (Sub-Contracted) Topsoil Analysis (Sub-Contracted) Page 2 of 11 Pages
3 CONSTRUCTION MATERIAL TESTING (Continued) Strength and Design Testing of Soil & Rock D3080 T236 N/A D1883 T D4767 T297 N/A D4546 N/A N/A D2938 T226 N/A D2435 T216 N/A D2166 T208 N/A D4767 T297 N/A D2850 T296 N/A D5731 N/A N/A D3967 N/A N/A Direct Shear Test of Soils Under Consolidated Drained Conditions California Bearing Ratio (CBR) Triaxial Shear Strength Testing - Consolidated Drained (CD) One-Dimensional Swell/Settlement Potential of Cohesive Soils Compressive Strength of Intact Rock Core Specimens One-Dimensional Consolidation Properties of Soil Unconfined Compressive Strength of Cohesive Soil Triaxial Shear Strength Testing - Consolidated Undrained (CU) Triaxial Shear Strength Testing - Unconsolidated Undrained (UU) Point Load Strength Index of Rock Splitting Tensile Strength of Intact Rock Core Specimens Permeability Testing D5084 N/A N/A D2434 T Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter Permeability of Granular Soils (Constant Head) Soil-Cement/Fly Ash Testing D558 T D559 T D1633 N/A N/A Moisture-Density Relations of Soil-Cement Mixtures Wetting and Drying Test of Compacted Soil-Cement Mixtures Test Method for Compressive Strength of Molded Soil-Cement Cylinders Page 3 of 11 Pages
4 CONSTRUCTION MATERIAL TESTING (Continued) Field Engineering Testing of Soil D1194 T235 N/A D4429 N/A N/A STP399 N/A N/A Bearing Capacity of Soil for Static Load and Spread Footings (Field) California Bearing Ratio of Soils in Place (Field) Dynamic Cone Penetration (Field) AGGREGATE C117 T C136 T C88 T C131 T C127 T C702 T248 N/A C128 T C1252 T D2419 T176 N/A C29 T C566 T255 N/A C40 T21 N/A C142 T D546 T37 N/A D3042 N/A N/A Material Finer than No. 200 Sieve by Washing Sieve Analysis of Fine and Coarse Aggregate Soundness of Fine and Coarse Aggregate L.A. Abrasion of Coarse Aggregate Specific Gravity and Absorption of Coarse Aggregate Reducing Field Samples of Aggregate to Testing Size Specific Gravity and Absorption of Fine Aggregate Uncompacted Void Content of Fine Aggregate Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test Bulk Density (Unit Weight) and Voids in Aggregate Total Moisture Content of Aggregate by Drying Organic Impurities in Fine Aggregate for Concrete Clay Lumps and Friable Particles in Aggregate Sieve Analysis of Mineral Filler for Road and Paving Materials Carbonate Content of Aggregates-Insoluble Residue (Sub-Contracted) Page 4 of 11 Pages
5 CONSTRUCTION MATERIAL TESTING (Continued) MASONRY C140 N/A N/A C1314 N/A N/A C1019 N/A N/A C780 N/A N/A C109 N/A N/A C67 T32 N/A Compressive Strength of Concrete Masonry Units Compressive Strength of Concrete Masonry Prisms Compressive Strength of Masonry Grout (Rectangular Specimens) Pre-Construction and Construction Evaluation of Mortar Compressive Strength of Hydraulic Cement Mortar Cubes Brick Testing (Efflorescence, Absorption and Compressive Strength) ASPHALT D2726 T D1188 T D2950 N/A 402 Bulk Specific Gravity of Compacted Hot Mixed Asphalt (Surface Saturated Dry) Bulk Specific Gravity of Compacted Hot Mixed Asphalt (Paraffin-Coated Specimens) Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods STRUCTURAL STEEL A325/A490 N/A N/A E165 N/A N/A A325/A490 N/A N/A Visual Weld Inspection (AWS and ASNT Methods) Visual Inspection of Bolted Connections (AWS and ASNT Methods) Bolt Torque Testing of Bolted Connections AISC Steel Erection Inspection Pull Out Testing of Embedded Anchors Dye Penetrant Weld Inspection Magnetic Particle Weld Inspection Ultrasonic Weld Inspection (Sub-Contracted) Bolt Tensioning-Torque Requirement Development (5 Bolts per Set) Page 5 of 11 Pages
6 CONSTRUCTION MATERIAL TESTING (Continued) SPRAYED FIRE RESISTIVE MATERIALS (SFRM) (FIREPROOFING) E605 N/A N/A E605 N/A N/A E736 N/A N/A E759 N/A N/A E760 N/A N/A Thickness of SFRM Density of SFRM Cohesion/Adhesion of SFRM Effect of Deflection Effect of Impact on Bonding On-Site Inspection Services Masonry Construction Inspection (IBC) Fresh Mixed Concrete Testing and Inspection (ACI) Specification Compliance for Steel Reinforcing Placement Hot Mixed Asphalt Placement Inspection and Density Testing Verification of Bearing Capacity of Soil and Rock for Foundation Construction Monitor and Test Placement of Fill/Backfill Materials Page 6 of 11 Pages
7 GEOTECHNICAL ENGINEERING DRILLING D1452 T203 N/A D1586 T206 N/A D1587 T207 N/A D2113 T225 N/A N/A T251 N/A Soil Investigation and Sampling by Auger Borings Standard Penetration Test and Split-Barrel Sampling of Soil Thin Walled Tube Sampling of Soil Diamond Core Drilling for Site Investigation Soil Investigation and Sampling by Hollow-Stem Auger Borings Soil Properties and Classification D2487 N/A N/A D422 T88 N/A D4318 T90 N/A D854 T100 N/A D421 T87 N/A D2217 T146 N/A D4972 N/A N/A D2216 T265 N/A D1140 N/A N/A D4318 T89 N/A N/A M145 N/A N/A N/A 133 A674 N/A N/A C400 N/A N/A D4644 N/A N/A Classification of Soils for Engineering Purposes (USCS) Particle Size Analysis of Soils / Hydrometer Determining the Plastic Limit and Plasticity Index of Soils Specific Gravity of Soils Textural Classification of Soils - United States Department of Agriculture (USDA) Dry Preparation of Disturbed Soil and Soil Aggregate Samples Wet Preparation of Disturbed Soil Samples for Test ph of Soils Laboratory Determination of Moisture Content of Soils Amount of Material in Soils Finer than the #200 Sieve Determining the Liquid Limit of Soils Classification of Soils for Highway Construction Purposes Soil Resistivity (PennDOT Methods) Corrosion Potential Series (Oxidation Reduction Potential) Acid Neutralization Slake Durability Index of Shale and Similar Weak Rock (Sub-Contracted) Topsoil Analysis (Sub-Contracted) Page 7 of 11 Pages
8 GEOTECHNICAL ENGINEERING (Continued) Moisture Density Relationship and Compaction D698 T D1557 T180 N/A D4718 T D6938 T D6938 T D1556 T D4253 N/A N/A D4254 N/A N/A Moisture Density Relations of Soils Using 5.5 lb. Rammer and 12 in. Drop (Standard Proctor) Moisture Density Relations of Soils Using 10.0 lb. Rammer and 18 in. Drop (Modified Proctor) Correction for Coarse Particles in the Soil Compaction Test Density of Soil and Soil-Aggregate In-Place by Nuclear Methods Moisture Content of Soil and Soil-Aggregate In-Place by Nuclear Methods (Compaction Testing) Density of Soil In-Place by the Sand-Cone Method Maximum Index Density and Unit Weight of Soil (Relative Density) Minimum Index Density and Unit Weight of Soil (Relative Density) Strength and Design Testing of Soil & Rock D1883 T D3080 T236 N/A D4546 N/A N/A D4767 T297 N/A D2938 T226 N/A D2435 T216 N/A D2166 T208 N/A D4767 T297 N/A D2850 T296 N/A D5731 N/A N/A D3967 N/A N/A California Bearing Ratio (CBR) Direct Shear Test of Soils Under Consolidated Drained Conditions One-Dimensional Swell/Settlement Potential of Cohesive Soils Triaxial Shear Strength Testing - Consolidated Drained (CD) Compressive Strength of Intact Rock Core Specimens One-Dimensional Consolidation Properties of Soil Unconfined Compressive Strength of Cohesive Soil Triaxial Shear Strength Testing - Consolidated Undrained (CU) Triaxial Shear Strength Testing - Unconsolidated Undrained (UU) Point Load Strength Index of Rock Splitting Tensile Strength of Intact Rock Core Specimens Page 8 of 11 Pages
9 GEOTECHNICAL ENGINEERING (Continued) Permeability Testing D5084 N/A N/A D2434 T Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter Permeability of Granular Soils (Constant Head) Soil-Cement/Fly Ash Testing D558 T D559 T D1633 N/A N/A Moisture-Density Relations of Soil-Cement Mixtures Wetting and Drying Test of Compacted Soil-Cement Mixtures Test Method for Compressive Strength of Molded Soil-Cement Cylinders Field Engineering Testing of Soil D1194 T235 N/A D4429 N/A N/A STP399 N/A N/A Bearing Capacity of Soil for Static Load and Spread Footings (Field) California Bearing Ratio of Soils in Place (Field) Dynamic Cone Penetration (Field) AGGREGATE C117 T C136 T C127 T C88 T C131 T C702 T248 N/A C128 T C1252 T Material Finer than No. 200 Sieve by Washing Sieve Analysis of Fine and Coarse Aggregate Specific Gravity and Absorption of Coarse Aggregate Soundness of Fine and Coarse Aggregate L.A. Abrasion of Coarse Aggregate Reducing Field Samples of Aggregate to Testing Size Specific Gravity and Absorption of Fine Aggregate Uncompacted Void Content of Fine Aggregate Page 9 of 11 Pages
10 GEOTECHNICAL ENGINEERING (Continued) AGGREGATE D2419 T176 N/A C29 T C566 T255 N/A C40 T21 N/A C142 T D546 T37 N/A D3042 N/A N/A Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test Bulk Density (Unit Weight) and Voids in Aggregate Total Moisture Content of Aggregate by Drying Organic Impurities in Fine Aggregate for Concrete Clay Lumps and Friable Particles in Aggregate Sieve Analysis of Mineral Filler for Road and Paving Materials Carbonate Content of Aggregates-Insoluble Residue (Sub-Contracted) On-Site Inspection Services Masonry Construction Inspection (IBC) Fresh Mixed Concrete Testing and Inspection (ACI) Specification Compliance for Steel Reinforcing Placement Hot Mixed Asphalt Placement Inspection and Density Testing Verification of Bearing Capacity of Soil and Rock for Foundation Construction Monitor and Test Placement of Fill/Backfill Materials Page 10 of 11 Pages
11 SPECIALTY FOUNDATION DESIGN Specialty foundation design would include the following foundation elements as well as pile caps. Minipiles H-Driven Piles Tapered Piles Caisson Underpinning Helical Piles SOIL SCIENCE Double Ring Infiltrometer Field Test (Dec PADEP Stormwater BMP Manual) Uncased Hole - Percolation Field Test (Dec PADEP Stormwater BMP Manual) Cased Hole - Percolation Field Test (Maryland Stormwater Manual Appendix D.1) Page 11 of 11 Pages
Quality Assurance Program. June 2005 2005 by Texas Department of Transportation (512) 416-2055 all rights reserved
Quality Assurance Program June 2005 2005 by Texas Department of Transportation (512) 416-2055 all rights reserved Quality Assurance Program June 2005 Manual Notices Manual Notice 2005-1To: Users of the
UMPQUA Testing Service
, LLC Materials Testing and Quality Control Services June 2016 Price List & General Terms and Conditions Page 1 of 7 , LLC Labor Rates Hourly Rates Concrete Technicians: (ODOT/ACI Certified QCT & CSTT):
CHAPTER 4 CONCRETE TRAINING AND QUALIFICATIONPROGRAM
Concrete Training Qualification Program Topic No. 700-000-001 Effective: July 1, 2002 Construction Training and Qualification Manual Revision: March 22, 2011 Concrete Training and Qualification Program
SITE INVESTIGATION FACILITIES
SITE INVESTIGATION FACILITIES Drilling Hydraulic rotary & calax drilling rigs100/150mm Diameter boreholes having drilling capacity up to 200m depth. Auger drilling 100/150mm diameter boreholes up to maximum
Shotcrete Quality Control and Testing for an Underground Mine in Canada
Shotcrete Quality Control and Testing for an Underground Mine in Canada By Dudley R. (Rusty) Morgan and Mazin Ezzet AMEC Earth & Environmental, a division of AMEC Americas Limited SHOTCRETE FOR AFRICA
1 Mobilisation and demobilisation 1 Deep boring sum 2 Cone penetration tests sum 3 Miscellenous tests sum
Malaysian Civil Engineering Standard Method of Measurement (MyCESMM) CLASS D: SITE INVESTIGATION WORK Measurement covered under other classes: Excavation not carried out for the purpose of soil investigation
Construction Materials Testing. Classes of Test
Construction Materials Testing Classes of Test February 2014 Copyright National Association of Testing Authorities, Australia 2014 This publication is protected by copyright under the Commonwealth of Australia
NorthEast Transportation Training and Certification Program (NETTCP) Course Registration Form
(NETTCP) Course Registration Form Interim Certification (Cost $300 members / $425 non-members) HMA Plant Technician* HMA Paving Inspector* Soils & Aggregate Inspector* Soils & Aggregate Lab Technician*
CONSULTANCY & MATERIAL TESTING FACILITY
CONSULTANCY & MATERIAL TESTING FACILITY (CIVIL ENGINEERING DEPARTMENT) JAYPEE UNIVERSITY OF ENGINEERING & TECHNOLOGY A.B. ROAD, P.B. NO-1, RAGHOGARH, DIST: GUNA (M.P.) - 473226 Phone: 07544-267051, 267310-314,
Schedule of Accreditation Issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Issued by 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Materials Testing Division Northdown House Ashford Road Kent ME17 1QW Contact: Ben Roper Tel: +44 (0)1622 858545 Fax: +44 (0)1622
1.5 Concrete (Part I)
1.5 Concrete (Part I) This section covers the following topics. Constituents of Concrete Properties of Hardened Concrete (Part I) 1.5.1 Constituents of Concrete Introduction Concrete is a composite material
c. Borehole Shear Test (BST): BST is performed according to the instructions published by Handy Geotechnical Instruments, Inc.
Design Manual Chapter 6 - Geotechnical 6B - Subsurface Exploration Program 6B-2 Testing A. General Information Several testing methods can be used to measure soil engineering properties. The advantages,
HIGHWAYS DEPARTMENT GUIDANCE NOTES ON SOIL TEST FOR PAVEMENT DESIGN
HIGHWAYS DEPARTMENT GUIDANCE NOTES ON SOIL TEST FOR PAVEMENT DESIGN Research & Development Division RD/GN/012 August 1990 HIGHWAYS DEPARTMENT GUIDANCE NOTES (RD/GN/012) SOIL TEST FOR PAVEMENT DESIGN Prepared
CHAPTER 2 AGGREGATE TECHNICIAN TRAINING AND QUALIFICATION PROGRAM
Topic No. 700-000-001 Construction Training and Qualification Manual Effective: July 1, 2002 Aggregate Technician Training and Qualification Program Revised: DRAFT May 6September 3, 2008 CHAPTER 2 AGGREGATE
1997 Uniform Administrative Code Amendment for Earthen Material and Straw Bale Structures Tucson/Pima County, Arizona
for Earthen Material and Straw Bale Structures SECTION 70 - GENERAL "APPENDIX CHAPTER 7 - EARTHEN MATERIAL STRUCTURES 70. Purpose. The purpose of this chapter is to establish minimum standards of safety
Schedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK skern Road arcroft Doncaster South Yorkshire DN6 8DG
C. Section 014510 TESTING LABORATORY SERVICE.
SECTION 014500 QUALITY CONTROL PART 1 GENERAL 1.01 RELATED REQUIREMENTS A. Drawings and General Provisions of Contract, including General and Special Conditions and other Division 1 Specification Sections,
SPECIFICATION FOR DYNAMIC CONSOLIDATION / DYNAMIC REPLACEMENT
SPECIFICATION FOR DYNAMIC CONSOLIDATION / DYNAMIC REPLACEMENT 1.0 SOIL IMPROVEMENT 1.1 General Soil Investigation Information are provided in Part B1 annex as a guide to the Contractor for his consideration
The AASHO Road Test site (which eventually became part of I-80) at Ottawa, Illinois, was typical of northern climates (see Table 1).
Página 1 de 12 AASHO Road Test The AASHO Road Test, a $27 million (1960 dollars) investment and the largest road experiment of its time, was conceived and sponsored by the American Association of State
Schedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK skern Road arcroft Doncaster South Yorkshire DN6 8DG
ASPHALT, CONCRETE, SOILS
NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES A division of the National Society of Professional Engineers Construction Materials Testing ASPHALT, CONCRETE, SOILS PROGRAM DETAIL MANUAL
CONSTRUCTION MATERIAL TESTING WWW.AU.SGS.COM/INDUSTRIAL
CONSTRUCTION MATERIAL TESTING WWW.AU.SGS.COM/INDUSTRIAL Introduction For over 20 years, we have offered a full range of materials testing to suit the requirements of local, national and international civil
NOTE: FOR PROJECTS REQUIRING CONTRACTOR MIX DESIGN, THE DESIGN PROCEDURES ARE SPECIFIED IN THE SPECIAL PROVISIONS OF THE CONTRACT.
September 1, 2003 CONCRETE MANUAL 5-694.300 MIX DESIGN 5-694.300 NOTE: FOR PROJECTS REQUIRING CONTRACTOR MIX DESIGN, THE DESIGN PROCEDURES ARE SPECIFIED IN THE SPECIAL PROVISIONS OF THE CONTRACT. 5-694.301
GRADATION OF AGGREGATE FOR CONCRETE BLOCK
GRADATION OF AGGREGATE FOR CONCRETE BLOCK Although numerous papers have been written concerning the proper gradation for concrete mixes, they have generally dealt with plastic mixes, and very little published
Moisture and Resilient Floor Covering
Moisture and Resilient Floor Covering Moisture related failures of resilient floor coverings installed over concrete have focused unfairly over the years on the premise that the flooring product itself
SECTION 32 14 13.19 PERMEABLE INTERLOCKING CONCRETE PAVEMENT (1995 MasterFormat Section 02795)
SECTION 32 14 13.19 PERMEABLE INTERLOCKING CONCRETE PAVEMENT (1995 MasterFormat Section 02795) Note: This guide specification for U.S. applications describes construction of permeable interlocking concrete
EFFECT OF NANO-SILICA ON CONCRETE CONTAINING METAKAOLIN
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 1, Jan-Feb 2016, pp. 104-112, Article ID: IJCIET_07_01_009 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=1
AGREGADOS RECICLADOS MITOS Y REALIDADES
The Production and Use of Recycled Concrete in the USA Thomas Van Dam, Ph.D., P.E., FACI Principal Engineer CTL Group Introduction In the United States, concrete is the most commonly used recycled material
Example Specification for Concrete using Current Building Code Requirements
Example Specification for Concrete using Current Building Code Requirements DISCLAIMER: This specification is an example that accompanies a seminar titled The P2P Initiative: Performance-based Specs for
Stabilization of Soil with Self-Cementing Coal Ashes
2005 World of Coal Ash (WOCA), April 11-15, 2005, Lexington, Kentucky, USA http://www.flyash.info Stabilization of Soil with Self-Cementing Coal Ashes Scott M. Mackiewicz, 1 E. Glen Ferguson, 2 1 & 2 Kleinfelder,
Work Type Definition and Submittal Requirements
Work Type: Highway Materials Testing Geotechnical Laboratory Testing, Geotechnical Laboratory Testing, Standard Penetration (SPT) & Rock Coring, Cone Penetration Test, Solid Stem Auger Drilling, and Materials
SECTION 32 14 13.19 PERMEABLE INTERLOCKING CONCRETE PAVEMENT (1995 MasterFormat Section 02795)
SECTION 32 14 13.19 PERMEABLE INTERLOCKING CONCRETE PAVEMENT (1995 MasterFormat Section 02795) Note: This guide specification for U.S. applications describes construction of permeable interlocking concrete
SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised 11/5/13)
Page 1 of 7 STONE STRONG SYSTEMS SPECIFICATIONS FOR PRECAST MODULAR BLOCK RETAINING WALL SYSTEM (revised ) PART 1: GENERAL 1.01 Description A. Work includes furnishing and installing precast modular blocks
Geotechnical Investigation Test Report
Geotechnical Investigation Test Report Report No. htsc/rcd/ 3457 Dated: - 20/03/2010 Asphalt Standard Penetration Test as per IS 2131 ------------- IS 6403 Soil Job Card No - 1649 Cement Client/Department
Division 2 Section 32 14 13.19 Section 02795
Note: The text must be edited to suit specific project requirements. It should be reviewed by a qualified civil or geotechnical engineer, or landscape architect familiar with the site conditions. Edit
Foundations 65 5 FOUNDATIONS. by Richard Chylinski, FAIA and Timothy P. McCormick, P.E. Seismic Retrofit Training
Foundations 65 5 FOUNDATIONS by Richard Chylinski, FAIA and Timothy P. McCormick, P.E. 66 Foundations Foundations 67 FOUNDATIONS Let's assume that the retrofit has been done correctly from the roofline
product manual HS-4210 HS-4210_MAN_09.08 Digital Static Cone Penetrometer
HS-4210_MAN_09.08 product manual HS-4210 Digital Static Cone Penetrometer Introduction This Manual covers the measurement of bearing capacity using the Humboldt Digital Static Cone Penetrometer (DSCP).
METHOD OF TEST FOR DETERMINATION OF PERMEABILITY OF GRANULAR SOILS
Laboratory Testing Manual Date: 99 06 21 Page 1 of 7 METHOD OF TEST FOR DETERMINATION OF PERMEABILITY OF GRANULAR SOILS 1. SCOPE 1.1 This method covers the determination of the coefficient of permeability
SECTION 32 32 23 CONCRETE SEGMENTAL RETAINING WALL SYSTEM
Anchor [coarse-split products] SECTION 32 32 23 CONCRETE SEGMENTAL RETAINING WALL SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Section Includes 1. Concrete segmental retaining wall units 2. Geosynthetic reinforcement
KWANG SING ENGINEERING PTE LTD
KWANG SING ENGINEERING PTE LTD 1. INTRODUCTION This report represents the soil investigation works at Aljunied Road / Geylang East Central. The objective of the soil investigation is to obtain soil parameters
SECTION 55 PIPE FOR STORM DRAINS AND CULVERTS (FAA D-701)
SECTION 55 PIPE FOR STORM DRAINS AND CULVERTS (FAA D-701) 55-1 GENERAL The Contractor shall perform all work required by the plans for construction of pipe for storm drains, precast polymer trench drains
CONSTANT HEAD AND FALLING HEAD PERMEABILITY TEST
CONSTANT HEAD AND FALLING HEAD PERMEABILITY TEST 1 Permeability is a measure of the ease in which water can flow through a soil volume. It is one of the most important geotechnical parameters. However,
SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND.
SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND. 623.10.1 Description. This work shall consist of preparing the surface,
SECTION 02795 UNI PERMEABLE INTERLOCKING CONCRETE PAVEMENT
SECTION 02795 UNI PERMEABLE INTERLOCKING CONCRETE PAVEMENT Note: This guide specification is intended for use in the U.S. It describes construction of permeable interlocking concrete pavers on a permeable,
COMPENDIUM OF INDIAN STANDARDS ON SOIL ENGINEERING PART 2
(PREVIEW) SP 36 (Part 2) : 1988 COMPENDIUM OF INDIAN STANDARDS ON SOIL ENGINEERING PART 2 IS 1893 : 1979 (Reaffirmed 1987) CODE OF PRACTICE FOR SUBSURFACE INVESTIGATION FOR FOUNDATIONS 1.1 This code deals
ENGINEERED FOUNDATIONS. Department of Public Works Jeff Hill, PE
ENGINEERED FOUNDATIONS Department of Public Works Jeff Hill, PE What is an engineered foundation. A Foundation Design Developed by a Trained Professional (Engineer) Types of Foundations (All of which can
GEOTECHNICAL ENGINEERING FORMULAS. A handy reference for use in geotechnical analysis and design
GEOTECHNICAL ENGINEERING FORMULAS A handy reference for use in geotechnical analysis and design TABLE OF CONTENTS Page 1. SOIL CLASSIFICATION...3 1.1 USCS: Unified Soil Classification System...3 1.1.1
Pavement Thickness. esign and RCC-Pave Software. Roller-Compacted Concrete Pavement: Design and Construction. October 24, 2006 Atlanta, Georgia
Roller-Compacted Concrete Pavement: Design and Construction Pavement Thickness esign and RCC-Pave Software Gregory E. Halsted, P.E. Pavements Engineer Portland Cement Association October 24, 2006 Atlanta,
Chapter 8 Design of Concrete Mixes
Chapter 8 Design of Concrete Mixes 1 The basic procedure for mix design is applicable to concrete for most purposes including pavements. Concrete mixes should meet; Workability (slump/vebe) Compressive
Inspections: Central Laboratory of the Regions
Page 1 Inspections: Central Laboratory of the Regions Protocol for Open Laboratory Review of a CDOT Materials Testing Laboratory Protocol for the Inspection of Region Materials Laboratories by the Central
ENGINEERING MATERIALS LABORATORY SECTION
AGGREGATE Page No. : 1 of 34 DCL 9 10 15 16 CHLORIDE CONTENT OF SAND & AGGREGATE ( ACID SOLUBLE ) SULPHATE CONTENT OF SAND & AGGREGATE ( ACID SOLUBLE ) SIEVE ANALYSIS OF FINE AND COARSE AGGREGATE (WET)
STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 888 PORTLAND CEMENT CONCRETE PAVEMENT USING QC/QA.
STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 888 PORTLAND CEMENT CONCRETE PAVEMENT USING QC/QA October 21, 2011 888.01 General 888.02 Materials 888.03 Concrete Proportioning 888.04
SafetyBuletin. Concrete101 Aguidetounderstandingthequalitiesofconcrete andhowtheyaffectpumping
SafetyBuletin Concrete101 Aguidetounderstandingthequalitiesofconcrete andhowtheyaffectpumping Copyright 2008 v1.01 ACPA All rights reserved Manufacturer s recommendations supersede any and all information
INSITU TESTS! Shear Vanes! Shear Vanes! Shear Vane Test! Sensitive Soils! Insitu testing is used for two reasons:!
In-situ Testing! Insitu Testing! Insitu testing is used for two reasons:! To allow the determination of shear strength or penetration resistance or permeability of soils that would be difficult or impossible
CW 3110 SUB-GRADE, SUB-BASE AND BASE COURSE CONSTRUCTION TABLE OF CONTENTS
December 2014 CW 3110 SUB-GRADE, SUB-BASE AND BASE COURSE CONSTRUCTION TABLE OF CONTENTS 1. DESCRIPTION... 1 1.1 General... 1 1.2 Definitions... 1 1.3 Referenced Standard Construction Specifications...
MASONRY INFORMATION. Selecting and Specifying Mortar and Grout for Unit Masonry. Introduction. Desirable Mortar Properties. Selection of Mortar
Portland Cement Association MASONRY INFORMATION Selecting and Specifying Mortar and Grout for Unit Masonry Introduction Masonry mortar and masonry grout are key materials in unit masonry construction.
CGA Standard Practices Series. Article 600 Standard for Pozzolan Enhanced Grouts Used in Annular Seals & Well Destruction
California Groundwater Association An NGWA Affiliate State PO Box 14369 Santa Rosa CA 95402 707-578-4408 fax: 707-546-4906 email: cga@groundh2o.org website: www.groundh2o.org CGA Standard Practices Series
Draft Table of Contents. Building Code Requirements for Structural Concrete and Commentary ACI 318-14
Draft Table of Contents Building Code Requirements for Structural Concrete and Commentary ACI 318-14 BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318 14) Chapter 1 General 1.1 Scope of ACI 318
LAYING BLOCK AND BRICK
LAYING BLOCK AND BRICK Products highlighted in this section: SAKRETE Type N Mortar Mix SAKRETE Type S Mortar Mix Brick And Block Laying Basics The first step in building a brick or block wall is to construct
Proper use of the Rebound Hammer Updated to reflect the changes to ASTM C805
CEMEX USA - Technical Bulletin 2.1 Proper use of the Rebound Hammer Updated to reflect the changes to ASTM C805 The Rebound Hammer has been around since the late 1940 s and today is a commonly used method
Manufacturing Quality Concrete Products
CEMEX USA - Technical Bulletin 8.0 Manufacturing Quality Concrete Products Establishing or Upgrading a Quality Program Overview The following guidelines were developed for MCP (manufactured concrete products)
Appendix D.1. Testing Requirements for Infiltration, Bioretention and Sand Filter Subsoils
Appendix D.1 Testing Requirements for Infiltration, Bioretention and Sand Filter Subsoils General Notes Pertinent to All Testing 1. For infiltration trench (I-1) and basin (I-2) practices, a minimum field
The Influence of Porosity & Aspect Ratio on the Compressive Behavior of Pervious Concrete. Alexander Hango
The Influence of Porosity & Aspect Ratio on the Compressive Behavior of Pervious Concrete by Alexander Hango 1 Clarkson University The Influence of Porosity & Aspect Ratio on the Compressive Behavior of
PROPERTIES AND MIX DESIGNATIONS 5-694.200
September 1, 2003 CONCRETE MANUAL 5-694.200 5-694.210 PROPERTIES OF CONCRETE PROPERTIES AND MIX DESIGNATIONS 5-694.200 Inspectors should familiarize themselves with the most important properties of concrete:
SECTION 32 14 13.19 PERMEABLE INTERLOCKING CONCRETE PAVEMENT
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 32 14 13.19 PERMEABLE INTERLOCKING CONCRETE PAVEMENT A. The requirements for construction of permeable interlocking concrete pavement: 1. Install the interlocking
CONCRETE SEGMENTAL RETAINING WALL SYSTEM
CONCRETE SEGMENTAL RETAINING WALL SYSTEM PART 1: GENERAL SPECIFICATIONS 1.01 Work Included A. Work shall consist of furnishing and constructing a Rockwood Classic 8 with PCS unit segmental retaining wall
VIRGINIA DEPARTMENT OF TRANSPORTATION MATERIALS DIVISION MEMORANDUM
VIRGINIA DEPARTMENT OF TRANSPORTATION MATERIALS DIVISION MEMORANDUM GENERAL SUBJECT: HYDRAULIC CEMENT CONCRETE REPAIR MATERIALS SPECIFIC SUBJECT: Requirements for Materials Divisions Approved List No.
The Strength of Concrete
Chapter The Strength of Concrete.1 The Importance of Strength.2 Strength Level Required KINDS OF STRENGTH. Compressive Strength.4 Flexural Strength.5 Tensile Strength.6 Shear, Torsion and Combined Stresses.7
EXPERIMENTAL INVESTIGATION ON BEHAVIOUR OF NANO CONCRETE
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 2, March-April 2016, pp. 315 320, Article ID: IJCIET_07_02_027 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=2
CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS
AN ERGONARMOR COMPANY TECHNICAL INFORMATION SPECIFICATION FOR INSTALLATION 07/11 SUPERSEDES 04/00 PAGE 1 OF 6 CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS 1. SCOPE 1.1 This specification
FACT SHEET: HYDRATED LIME FOR MASONRY PURPOSES
FACT SHEET: HYDRATED LIME FOR MASONRY PURPOSES Hydrated Masons Lime Characteristics Type S (Special) hydrated lime is a fine, white, high purity product which has been specially hydrated for convenient,
FINAL REPORT ON SOIL INVESTIGATION
FINAL REPORT ON SOIL INVESTIGATION FOR PROPOSED CONSTRUCTION AT SS-6B AREA AT HPCL VISAKH REFINERY VISAKHAPATNAM ANDHRA PRADESH J.J. ASSOCIATES(VISAKHAPATNAM) AETP(P) LIMITED #11-6-3, RockDale Layout,
Mortars for Brickwork - Selection and Quality Assurance
TECHNICAL NOTES on Brick Construction 1850 Centennial Park Drive, Reston, Virginia 20191 www.gobrick.com 703-620-0010 Mortars for Brickwork - Selection and Quality Assurance 8B October 2006 Abstract: This
Effect of basalt aggregates and plasticizer on the compressive strength of concrete
International Journal of Engineering & Technology, 4 (4) (2015) 520-525 www.sciencepubco.com/index.php/ijet Science Publishing Corporation doi: 10.14419/ijet.v4i4.4932 Research Paper Effect of basalt aggregates
1. ASTM C 140 - Sampling and Testing Concrete Masonry Units 2. ASTM C 1372 Standard Specification for Dry-Cast Segmental Retaining Wall Units
SPECIFICATION FOR SEGMENTAL RETAINING WALL SYSTEMS PART 1: GENERAL 1.01 Description A. Work shall consist of furnishing materials, labor, equipment and supervision to install a segmental retaining wall
Testing Procedures. Note: Please refer to Table 2 for a list of completed borings.
Testing Procedures Drilling and Sampling: Standard penetration tests (SPT) were conducted for every ten feet of boring advancement. SPT tests were conducted in accordance with ASTM D1586, using a 140 pound
Ohio Department of Transportation Division of Production Management Office of Geotechnical Engineering. Geotechnical Bulletin PLAN SUBGRADES
Ohio Department of Transportation Division of Production Management Office of Geotechnical Engineering Geotechnical Bulletin GB 1 PLAN SUBGRADES Geotechnical Bulletin GB1 was jointly developed by the Offices
Chapter 5 FIELD AND LABORATORY TESTING PROCEDURES
Chapter 5 FIELD AND LABORATORY TESTING PROCEDURES Final SCDOT GEOTECHNICAL DESIGN MANUAL August 2008 Table of Contents Section Page 5.1 Introduction...5-1 5.2 Sampling Procedure...5-1 5.2.1 Soil Sampling...5-1
Lab 1 Concrete Proportioning, Mixing, and Testing
Lab 1 Concrete Proportioning, Mixing, and Testing Supplemental Lab manual Objectives Concepts Background Experimental Procedure Report Requirements Discussion Prepared By Mutlu Ozer Objectives Students
EXPERIMENT NO.1. : Vicat s apparatus, plunger
EXPERIMENT NO.1 Name of experiment:to determine the percentage of water for normal consistency for a given sample of cement Apparatus : Vicat s apparatus with plunger of 10mm dia, measuring cylinder, weighing
Strength of Concrete
Strength of Concrete In concrete design and quality control, strength is the property generally specified. This is because, compared to most other properties, testing strength is relatively easy. Furthermore,
Chapter 2 Basis of design and materials
Chapter 2 Basis of design and materials 2.1 Structural action It is necessary to start a design by deciding on the type and layout of structure to be used. Tentative sizes must be allocated to each structural
Contractor s Statement of Responsibility for Seismic-Force-Resisting Systems This form is to be filled out by the contractor.
SPECIAL INSPECTION PROCEDURE IBC CHAPTER 17 2012 EDITION When Required All projects that require a SC licensed Architect or Engineer per SC Architectural and Engineering registration law. Overview The
Quality control: Annex-A.
Quality control: Quality of the constructed work has been checked by our staff as per frequency and provision mentioned section 900 in MoRT&H and as per provision mentioned in Concession Agreement. The
METHOD OF STATEMENT FOR STATIC LOADING TEST
Compression Test, METHOD OF STATEMENT FOR STATIC LOADING TEST Tension Test and Lateral Test According to the American Standards ASTM D1143 07, ASTM D3689 07, ASTM D3966 07 and Euro Codes EC7 Table of Contents
FIELD SAMPLING AND TESTING MANUAL TESTING PROCEDURES FOR ALL TESTS
FIELD SAMPLING AND TESTING MANUAL TESTING PROCEDURES FOR ALL TESTS Intentionally Left Blank TESTING PROCEDURES FOR ALL TESTS TABLE OF CONTENTS ND T 2 ND T 11 ND T 23 ND T 27 ND T 84 ND T 85 ND T 87 ND
CONCRETE SEGMENTAL RETAINING WALL SYSTEM
CONCRETE SEGMENTAL RETAINING WALL SYSTEM PART 1: GENERAL SPECIFICATIONS 1.01 Work Included A. Work shall consist of furnishing and constructing a Rockwood Vintage TM unit segmental retaining wall (SRW)
A COMPREHENSIVE STUDY ON PARTIAL REPLACEMENT OF CEMENT WITH SUGARCANE BAGASSE ASH, RICE HUSK ASH & STONE DUST
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 3, May June 2016, pp. 163 172, Article ID: IJCIET_07_03_016 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=3
SECTION 03400 PRECAST CONCRETE STRUCTURES
PART 1 GENERAL 1.01 SCOPE OF WORK A. Furnish all labor, materials, and equipment required to install precast concrete manholes, sanitary leaching rings, pump station, valve chamber, structures, frames,
Treatment of a surface or structure to resist the passage of water in the absence of hydrostatic pressure. presence of hydrostatic pressure.
Recommend Approval: Team Leader Date Division Chief Date Approved: Director Date Maryland Department of Transportation State Highway Administration Office of Materials Technology MARYLAND STANDARD METHOD
DMS - 7310 REINFORCED CONCRETE PIPE AND MACHINE-MADE PRECAST CONCRETE BOX CULVERT FABRICATION AND PLANT QUALIFICATION
DMS - 7310 REINFORCED CONCRETE PIPE AND MACHINE-MADE PRECAST CONCRETE BOX CULVERT FABRICATION EFFECTIVE DATE: APRIL 2012 7310.1. Description. This specification will govern for the fabrication of machine-made
System. Stability. Security. Integrity. 150 Helical Anchor
Model 150 HELICAL ANCHOR System PN #MBHAT Stability. Security. Integrity. 150 Helical Anchor System About Foundation Supportworks is a network of the most experienced and knowledgeable foundation repair
Geotechnical Properties of Fly Ash and Soil Mixtures for Use in Highway Embankments
World of Coal Ash (WOCA) Conference - May 9-12, 2011, in Denver, CO, USA http://www.flyash.info/ Geotechnical Properties of Fly Ash and Soil Mixtures for Use in Highway Embankments Fabio Santos 1, Lin
Testing and appraisal of Lucobit polymer effect as an additive on asphalt mixture performance
Abstract Testing and appraisal of polymer effect as an additive on asphalt mixture performance Hamid Sabbagh mollahosseini*,golazin Yadollahi**, Ershad Amoosoltani*** *, ***Executive of Engineering and
Choosing the Right Mortar for the Job
Choosing the Right Mortar for the Job by Michael Schuller, P.E. President, Atkinson-Noland & Associates 2619 Spruce St. Boulder, CO 80302 www.ana-usa.com Modern material technology has given us strong
STRENGTH OF CONCRETE INCORPORATING AGGREGATES RECYCLED FROM DEMOLITION WASTE
STRENGTH OF CONCRETE INCORPORATING AGGREGATES RECYCLED FROM DEMOLITION WASTE R. Kumutha and K. Vijai Department of Civil Engineering, Sethu Institute of Technology, Pulloor, Kariapatti, India E-Mail: kumuthar@yahoo.co.in,
MeltonStone Cast Stone Product Specifications
MeltonStone Cast Stone Product Specifications Section 04-72-00-04 Architectural Cast Stone This specification encompasses basic requirements for Cast Stone, a refined architectural concrete building unit
Commonwealth of Pennsylvania PA Test Method No. 632 Department of Transportation October 2013 5 Pages LABORATORY TESTING SECTION. Method of Test for
Commonwealth of Pennsylvania PA Test Method No. 632 Department of Transportation 5 Pages LABORATORY TESTING SECTION Method of Test for TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE 1.
OVERVIEW. 1 Intent:... 2. 2 Applicability:... 2. 3 Referenced Standards... 2. 5 Invert Repair Mortar... 3
PERMACAST CENTRIFUGALLY CAST CONCRETE PIPE (CCCP) OVERVIEW 1 Intent:... 2 2 Applicability:... 2 3 Referenced Standards... 2 5 Invert Repair Mortar... 3 6 Centrifugally Cast Concrete Pipe (CCCP)... 3 7
SPECIAL INSPECTION AND TESTING AGREEMENT INTERNATIONAL BUILDING CODE
Community Development Permit Services SPECIAL INSPECTION AND TESTING AGREEMENT INTERNATIONAL BUILDING CODE PROJECT NAME PROJECT ADDRESS PERMIT NUMBER CITY RECEIVED STAMP AND INITIALS Instructions: BEFORE