Motorized Butterfly Valve DRAFT. Actuated butterfly valves FEATURES SPECIFICATIONS GENERAL PRODUCT DATA. Valve. Actuator Power Supply 220Vac, 50/60Hz

Transcription

1 Motorized Butterfly Valve Actuated butterfly valves DRAFT PRODUCT DATA FEATURES Wide size range (DN 0 00) For On-Off Control with feedback signal Manual override Hand-Wheel design. Manual operation can be operated without any lever, clutch or brake upon power voltage. Irreversible worm gear. Continuous position indicator for accurate visual reference of valve position. Anti-condensation heater and limit switches on standard model Over-torque protection function(except EM-000 and EM-0090) Enclosure IP67 SPECIFICATIONS Valve Sizes DN0 00 Nominal pressure PN Tightness Bubble tight Medium Temperature - ~ +90 Maximum Body Material GG (for DN0 DN10) GGG40 (for DN00 DN600) GENERAL Stem Material SS4 Disc Material Epoxy coated ductile iron GGG40 The V4 Actuated Butterfly Valves are suitable for heating and cooling applications. Liner Material Medium Type Pipe Connection EPDM Chilled and Hot water ISO700- The V4 series is equipped with standard On-Off control quarter-turn electric actuator. Actuator Power Supply 0Vac, 0/60Hz The V4 series can also provide feedback output signal: Running time See table (1) Dry contact for On-Off version Power For Consumption current output models: See table (4) Travel Angle 90 o ± o Input On-Off Feedback Dry contact Outdoor protection IP67 Waterproof Temperature -30 to + 70 Operating environment no strong corrosion media, no explosive mixture of gases, no strong vibration Indicator Continuous Position Indicator Manual Override Hand-Wheel Worm Gear Permanently lubricated and self locking Space Heater Yes Material Aluminum Alloy External Coating Dry powder coating Stall Protection 13 ± Weight See table (4) 1 APEN0H-03CH33A0908

2 Table (1) Control Type and Valve Size Data The below table is based on differential pressure of bar. Valve Size Valve OS# (Wafer) Actuator OS# Max Torque (Nm) Run Time at 60Hz (sec) Kvs (m 3 /h) DN0 V4BFW-00 EM DN6 V4BFW-06 EM DN80 V4BFW-080 EM DN0 V4BFW-0 EM DN1 V4BFW-1 EM DN10 V4BFW-10 EM ,70 DN00 V4BFW-00 EM ,0 DN0 V4BFW-0 EM ,34 DN300 V4BFW-300 EM ,708 DN30 V4BFW-30 EM-00 1, ,793 DN400 V4BFW-400 EM-100 1, ,467 DN40 V4BFW-40 EM-000, ,836 DN00 V4BFW-00 EM-00,00 90,933 Note: More OS# Please refer to Figure (1) or contact Honeywell. Figure (1) Product Identification System Ordering Data the labeling system for Honeywell butterfly valve and actuator: V4 Valve body, Cast Iron BF Butterfly Valve W End Connection, W: Wafer Type; L: Lug Type Nominal Pressure Rating, : PN -00 Valve Size, -00: DN0; -06: DN6; Disc Material, Blank: Ductile Iron; -: SS304 V4 BF W -00 Butterfly valve EM Electric Actuator type, EM: On-Off -000 Max. Torque Rating, -000: 0Nm; -0090: 90Nm; Actuator Power Rating, Blank: 0V EM -000 Actuator e.g.: V4BFW-00 Butterfly Valve, Cast Iron Valve Body, Wafer End Connection, PN Nominal Pressure, DN0 Size, Ductile Iron Disc. EM-000 0Vac Actuator, On-Off Control, Max Torque is 0 Nm. APEN0H-03CH33A0908

3 Table () Valve Dimensions (mm) and Weight PN Size G N- Ø Weight (Kg) A B C D L H Ø K ØE n- Ød Ød0 ØD DN Inch Wafer Lug Wafer Lug Wafer Lug Ø18 4-M Ø18 4-M Ø18 8-M Ø18 8-M Ø18 8-M Ø 8-M Ø 1-M Ø6 1-M Ø6 1-M Ø6 -M Ø30 -M Ø30 0-M Ø33 0-M Ø36 0-M " Ø " Ø " Ø " Ø " Ø " Ø " Ø " Ø " Ø APEN0H-03CH33A0908

4 Table (3) Hydraulic Characteristics The below table shows the Kvs at different opening angles: Size Kvs at Disk Opening Angle o 0 o 30 o 40 o 0 o 60 o 70 o 80 o 90 o ,16 1, ,47,31, ,006 1,664,634 3,91 4, ,4,71 4,070 6,4 6, ,73,69 3,74,941 8,911 9, ,70 3,, 8,170 1, 13, ,070,319 4,13 6,837,81,31 17, ,376,981,313 8,791 13,913 0,869, ,004, 4,606 8,09 13,8 1,49 3,4 3,431 Table (4) Actuator Data OS# On-Off Max Torque (Nm) Speed (r/min) Run Time at 60Hz (sec) Power Consumption (Watts) Manual Override EM EM Hand-wheel EM Hand-wheel 1 EM Hand-wheel 18 EM Hand-wheel EM Hand-wheel 48 EM Hand-wheel 0 EM Hand-wheel 0 Weight (Kg) APEN0H-03CH33A0908 4

5 Table () Actuator Dimensions (mm) EM-000 EM-0090 ~ EM-00 Model A1 A A3 B B1 B D D1 E H1 H L L1 L EM EM EM EM EM-100 EM-000 EM APEN0H-03CH33A0908

6 INSTALLATION WARNING! Remove power before the cover is dismantled! The actuator must be handled with the utmost care when the cover is removed and the power connected! MOUNTING ON VALVE Operate the valve manually to fully opened or fully closed position before the actuator is mounted. Operate the actuator and valve stem to fully opened or fully closed position. Check that the actuator and valve stem are in correct position. Please note, valve and actuator must be in the same mode (fully opened/fully closed) prior to the assembly. Mount the actuator on the valve and check that the actuator and valve stem are centered and aligned. Operate the valve manually with the aid of the actuator hand-wheel and check that the valve moves with normal resistance. ELECTRIC WIRING Note: Electric wiring must be carried out by qualified personnel only! Wiring diagram is also shown on the label of top cover. Loosen the screws on the cover and lift it off. Check the voltage marked on the actuator label. Connect according to the enclosed wiring diagram or if the actuator is of standard design, according to the wiring diagram below. The wiring diagram is drawn in unaffected position (the valve in the intermediate position). Test run the actuator from intermediate position checking that the actuator turns in the correct direction. Test run the actuator and check that the limit switches work correctly. Check that the cable entries and possible blind plug are sealed. Mount the cover. Check that all screws are correctly tightened. Automation and Control Solutions Honeywell (Tianjin) Limited 18 Nan Hai Road Tianjin Economic-Technological Development Area Tianjin, 30047, P.R.C. Phone: Fax: Subject to change without notice. Printed in China. APEN0H-03CH33A0908 6