GENERAL INFORMATION CONCEPT ADVANTAGES CERTIFICATES
|
|
- Blaise Adams
- 7 years ago
- Views:
Transcription
1
2 GENERAL INFORMATION CONCEPT ADVANTAGES CERTIFICATES
3
4 curtain wall system E85 E 85 is a multifunctional system which can be com bined with any kind of glazing and shape as well as with other materials. E 85 enables the execution of complex constructions as roofs, cupolas, atriums, pyramids, conservatories. high structural stability of the system is achieved with lowest weight of the profiles. E 85 has optimum thermal performance even in regions with severe weather conditions. This system is easy for fabrication in the workshop and effortless to be assembled on site. The proper selection of thermal spacer reduces the chances for condensation formation Additional thermal spacer for optimum performance E 85 has effective and proved airtightness and watertightness, due to large internal drains on three levels, without discontinuity at the junction of mullions or transoms, carefully designed accessories and specially constructed supplementary profiles for sealing the perimeter of the façade. All characteristics of the system are tested in ift Rosenheim.
5 curtain wall system E85 There is option to insert photovoltaic and etalbond composite panels within the façade. 85 is also available in anti burglar version, which is suitable for window displays of bank offices and financial institutions. Sun protection panels can be easily installed in front of the system.
6
7
8 curtain wall system E85 There is an extended range of options for joining mullions and transoms according to the applied loads Additional joints can be used case of severe loads 2nd level drainage 3rd level drainage
9 curtain wall system E R
10 curtain wall system E85 O
11 curtain wall system E 85 transom to transom connection not to scale 2 2 E85M
12 BUILDING PHYSICS DIMENSIONING FORMULAE EXAMPLES
13
14 curtain wall system E85 * h/b 0,25 h/b 0,5 b/8 2 m
15 curtain wall system E85 from vertical loads (dead loads) shall not exceed L/0, or 0,015 m whichever is the less (EN 13830), or 0,003m, whichever is the less (EN 13830)
16 curtain wall system E85
17 curtain wall system E85
18 curtain wall system E85
19 curtain wall system E85
20 curtain wall system E85
21 curtain wall system E85
22
23 curtain wall system E85 w. (a/2). h w. (b/2). h w. (a/2). h w. (b/2). h or 0,015 m whichever is the less (EN 13830) 96. (1,5/2). 3,3 96. (1/2). 3,3
24
25
26
27
28 curtain wall system E85 = 0.9 a: S1-01a 2,2 2a: S1-02a 2 a: S1-03a 2 2 a: S1-04a 29,9 a: S1-05a 9 2 a: S1-06a 59 2 a: S1-07a 2 a: S1-08a 2 2 9a: S1-09a 29,9 0a: S1-10a a: S2-01a a: S2-02a a: S2-03a a: S2-04a a: S2-05a a: S2-06a a: S2-07a a: S2-08a a: S2-09a ,2 0a: S2-10a a: S3-01a 2a: S3-02a a: S3-03a a: S3-04a a: S3-05a a: S3-06a a: S3-07a a: S3-08a 9a: S3-09a 0a: S3-10a 1a: S3-11a 2a: S3-12a 3a: S3-13a 4a: S3-14a 5a: S3-15a , ,2 2,9 2,9 a: S4-01a,9 2a: S4-02a 20 2 a: S4-03a 2 2 a: S4-04a 9,9 a: S4-05a 9,9 a: S4-06a 69 2 a: S4-07a a: S4-08a 9 2 9a: S4-09a a: S4-10a 1a: S4-11a 2 2a: S4-12a 29 3a: S4-13a 59 4a: S4-14a 5a: S4-15a
29 TABLES LIST OF PROFILES CHARACTERISTICS
30 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E mullion X 66 Y 6,6 m 2006 g/m 448 mm 149 mm Ix = 27,70 cm 4 Wx = 6,96 cm 3 ex = 2, cm ix = 1,93 cm Iy = 19,39 cm 4 Wy = 7,75 cm 3 еy = 3,98 cm iy = 1,62 cm E mullion 70 X 86 Y 6,6 m 2211 g/m 488 mm 189 mm Ix = 58,04 cm 4 Wx = 12,19 cm 3 ex = 2, cm ix = 2,66 cm Iy = 23,79 cm 4 Wy = 9,51 cm 3 еy = 4,76 cm iy = 1,70 cm E mullion 90 X 106 Y 6,6 m 2417 g/m 528 mm 229 mm Ix = 104,15 cm 4 Wx = 18,65 cm 3 ex = 2, cm ix = 3,41 cm Iy = 28,19 cm 4 Wy = 11,27 cm 3 еy = 5,58 cm iy = 1,78 cm E mullion 110 X 126 Y 6,6 m 2665 g/m 568 mm 269 mm Ix = 169,00 cm 4 Wx = 26,15 cm 3 ex = 2, cm ix = 4,14 cm Iy = 33,43 cm 4 Wy = 13,37 cm 3 еy = 6,46 cm iy = 1,84 cm E mullion 130 X 146 Y 6,6 m 2881 g/m 608 mm 309 mm Ix = 252,55 cm 4 Wx = 34,40 cm 3 ex = 2, cm ix = 4,87 cm Iy = 38,03 cm 4 Wy = 15,21 cm 3 еy = 7,34 cm iy = 1,89 cm E mullion 160 X 176 Y 6,6 m 3205 g/m 668 mm 369 mm Ix = 417,97 cm 4 Wx = 46,90 cm 3 ex = 2, cm ix = 5,93 cm Iy = 44,95 cm 4 Wy = 17,98 cm 3 еy = 8,91 cm iy = 1,95 cm 3.1
31 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E mullion 180 X 196 Y 6,6 m 4628 g/m 708 mm 409 mm Ix = 752,98 cm 4 Wx = 74,89 cm 3 ex = 2, cm ix = 6,63 cm Iy = 60,74 cm 4 Wy = 24,30 cm 3 еy = 10,06 cm iy = 1,88 cm E mullion 200 X 216 Y 6,6 m 5165 g/m 748 mm 449 mm Ix = 1003,76 cm 4 Wx = 91,01 cm 3 ex = 2, cm ix = 7,24 cm Iy = 71,32 cm 4 Wy = 28,53 cm 3 еy = 11,03 cm iy = 1,93 cm E mullion 200 X 216 Y 6,6 m 6423 g/m 748 mm 449 mm Ix = 1326,00 cm 4 Wx = 116,21 cm 3 ex = 2, cm ix = 7,47 cm Iy = 80,93 cm 4 Wy = 32,37 cm 3 еy = 11,41 cm iy = 1,85 cm E mullion 230 X 246 Y 6,6 m 8416 g/m 808 mm 9 mm Ix = 2161,67 cm 4 Wx = 162,85 cm 3 ex = 2, cm ix = 8,33 cm Iy = 110,05 cm 4 Wy = 44,02 cm 3 еy = 13,27 cm iy = 1,88 cm E split mullion 22.5 X 90 Y 6,6 m 1320 g/m 382 mm 114 mm Ix = 33,69 cm 4 Wx = 6,96 cm 3 ex = 1,44 cm ix = 2,62 cm Iy = 2,70 cm 4 Wy = 1,87 cm 3 еy = 4,84 cm iy = 0,74 cm E split mullion 22.5 X 110 Y 6,6 m 1536 g/m 422 mm 134 mm Ix = 60,99cm 4 Wx = 10,58 cm 3 ex = 1,41 cm ix = 3,27 cm Iy = 3,40 cm 4 Wy = 2,40 cm 3 еy = 5,77 cm iy = 0,77 cm 3.2
32 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E split mullion 22.5 X 130 Y 6,6 m 1752 g/m 462 mm 154 mm Ix = 99,63 cm 4 Wx = 14,85 cm 3 ex = 1,39 cm ix = 3,92 cm Iy = 4,09 cm 4 Wy = 2,94 cm 3 еy = 6,71 cm iy = 0,79 cm E split mullion 22.5 X 160 Y 6,6 m 2076 g/m 523 mm 184 mm Ix = 182,37 cm 4 Wx = 22,39 cm 3 ex = 1,37 cm ix = 4,87 cm Iy = 5,12 cm 4 Wy = 3,75 cm 3 еy = 8,15 cm iy = 0,82 cm E 851 suppl. profile for split mullion 32 X 68.8 Y 6,6 m 1004 g/m 343 mm 0 mm Ix = 14,00 cm 4 Wx = 3,95 cm 3 ex = 1,72 cm ix = 1,94 cm Iy = 1,56 cm 4 Wy = 0,90 cm 3 еy = 3,55 cm iy = 0,65 cm E suppl. profile for split mullion 32 X Y 6,6 m 230 g/m 91 mm 33 mm Ix = 0,10 cm 4 Wx = 0,10 cm 3 ex = 1,62 cm ix = 0,35 cm Iy = 0,53 cm 4 Wy = 0,33 cm 3 еy = 1,07 cm iy = 0,79 cm 13.5 E mullion for substructure 35.3 X 81 Y 6,6 m 2311 g/m 643 mm 94 mm Ix = 36,82 cm 4 Wx = 8,70 cm 3 ex = 2,51 cm ix = 2,08 cm Iy = 18,31 cm 4 Wy = 7,29 cm 3 еy = 4,23 cm iy = 1,46 cm E cover cap ,6 m 130 g/m 81 mm 26 mm 3.3
33 curtain wall system code description profile X length weight ext. perimeter vis. perimeter statical values E 85 E mullion Y 6,6 m 3572 g/m 859 mm 259 mm Ix = 128,93 cm 4 Wx = 20,80 cm 3 ex = 6,20 cm ix = 3,12 cm Iy = 128,93 cm 4 Wy = 20,80 cm 3 еy = 6,20 cm iy = 3,12 cm X 90 E mullion Y 6,6 m 3610 g/m 6 mm 333 mm Ix = 176,02 cm 4 Wx = 27,17 cm 3 ex = 7,06 cm ix = 3,63 cm Iy = 216,12 cm 4 Wy = 30,62 cm 3 еy = 6,48 cm iy = 4,02 cm E suppl. mullion profile X 40.1 Y 6,6 m 999 g/m 313 mm 19 mm Ix = 6,14 cm 4 Wx = 2,79 cm 3 ex = 2, cm ix = 1,29 cm Iy = 5,17 cm 4 Wy = 2,07 cm 3 еy = 2,20 cm iy = 1,18 cm E split rotating mullion 30 X 55.6 Y 6,6 m 986 g/m 312 mm 42 mm Ix = 7,26 cm 4 Wx = 2,54 cm 3 ex = 1,62 cm ix = 1,41 cm Iy = 3,89 cm 4 Wy = 2,41 cm 3 еy = 2,86 cm iy = 1,03 cm E inner suppl. mullion profile X Y 6,6 m 810 g/m 226 mm 29 mm Ix = 3, cm 4 Wx = 1,38 cm 3 ex = 2,53 cm ix = 1,08 cm Iy = 3, cm 4 Wy = 1,38 cm 3 еy = 2,53 cm iy = 1,08 cm E outer suppl. mullion profile X Y 6,6 m 972 g/m 240 mm 0 mm Ix = 3,38 cm 4 Wx = 1,89 cm 3 ex = 1,79 cm ix = 0,97 cm Iy = 3,38 cm 4 Wy = 1,89 cm 3 еy = 1,79 cm iy = 0,97 cm 3.4
34 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E nd level transom 15 X 31 Y 6,01 m 1015 g/m 300 mm 79 mm Ix = 2,78 cm 4 Wx = 1,33 cm 3 ex = 2, cm ix = 0,86 cm Iy = 7,64 cm 4 Wy = 3,06 cm 3 еy = 2,10 cm iy = 1,43 cm E nd level transom 29 X 45 Y 6,01 m 1293 g/m 330 mm 107 mm Ix = 7,12 cm 4 Wx = 2,76 cm 3 ex = 2, cm ix = 1,22 cm Iy = 11,55 cm 4 Wy = 4,62 cm 3 еy = 2,61 cm iy = 1,55 cm E nd level transom 49 X 65 Y 6,01 m 1455 g/m 370 mm 147 mm Ix = 19,52 cm 4 Wx = 6,00 cm 3 ex = 2, cm ix = 1,90 cm Iy = 15,08 cm 4 Wy = 6,03 cm 3 еy = 3,26 cm iy = 1,67 cm E nd level transom 69 X 85 Y 6,01 m 1785 g/m 410 mm 187 mm Ix = 45,83 cm 4 Wx = 10,54 cm 3 ex = 2, cm ix = 2,64 cm Iy = 21,60 cm 4 Wy = 8,64 cm 3 еy = 4,35 cm iy = 1,81 cm E nd level transom 89 X 105 Y 6,01 m 2276 g/m 4 mm 227 mm Ix = 98,87 cm 4 Wx = 18,06 cm 3 ex = 2, cm ix = 3,42 cm Iy = 26,45 cm 4 Wy = 10,58 cm 3 еy = 5,47 cm iy = 1,77 cm E nd level transom 109 X 125 Y 6,01 m 2492 g/m 490 mm 267 mm Ix = 160,52 cm 4 Wx = 25,02 cm 3 ex = 2, cm ix = 4,17 cm Iy = 31,06 cm 4 Wy = 12,42 cm 3 еy = 6,42 cm iy = 1,83 cm 3.5
35 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E nd level transom 129 X 145 Y 6,01 m Ix = 240,58 cm g/m Wx = 32,66 cm mm ex = 2, cm 307 mm ix = 4,90 cm Iy = 35,67 cm 4 Wy = 14,27 cm 3 еy = 7,37 cm iy = 1,89 cm E nd level transom 159 X 175 Y 6,01 m 3032 g/m 590 mm 367 mm Ix = 398,72 cm 4 Wx = 45,28 cm 3 ex = 2, cm ix = 5,96 cm Iy = 42,59 cm 4 Wy = 17,04 cm 3 еy = 8,81 cm iy = 1,95 cm E nd level suppl. transom 58 X Y 6,01 m 1080 g/m 283 mm 195 mm Ix = 22,08 cm 4 Wx = 5,85 cm 3 ex = 2,90 cm ix = 2,35 cm Iy = 20, cm 4 Wy = 7,07 cm 3 еy = 3,78 cm iy = 2,27 cm 69 E nd level suppl. transom 58 X 89 Y 6,01 m 1229 g/m 323 mm 235 mm Ix = 43,64 cm 4 Wx = 9,25 cm 3 ex = 2,90 cm ix = 3,10 cm Iy = 24,98 cm 4 Wy = 8,61 cm 3 еy = 4,72 cm iy = 2,34 cm E nd level suppl. transom 58 X Y 6,01 m 1380 g/m 363 mm 275 mm Ix = 74,28 cm 4 Wx = 13,10 cm 3 ex = 2,90 cm ix = 3,81 cm Iy = 29,47 cm 4 Wy = 10,16 cm 3 еy = 5,67 cm iy = 2,40 cm 109 E nd level suppl. transom 58 X 129 Y 6,01 m 1531 g/m 403 mm 315 mm Ix = 115,13 cm 4 Wx = 17,37 cm 3 ex = 2,90 cm ix = 4, cm Iy = 33,95 cm 4 Wy = 11,71 cm 3 еy = 6,63 cm iy = 2,45 cm 3.6
36 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values 6 E 853 3rd level transom X Y 16 6,01 m Ix = 0,41 cm g/m Wx = 0,35 cm mm ex = 2, cm 62 mm ix = 0,43 cm Iy = 3,78 cm 4 Wy = 1,51 cm 3 еy = 1,18 cm iy = 1,30 cm E rd level transom 15 X Y 25 6,01 m 948 g/m 221 mm 79 mm Ix = 1,49 cm 4 Wx = 0,94 cm 3 ex = 2, cm ix = 0,65 cm Iy = 7,42 cm 4 Wy = 2,97 cm 3 еy = 1,58 cm iy = 1,45 cm E rd level transom 35 X 45 Y 6,01 m 1164 g/m 261 mm 119 mm Ix = 8,70 cm 4 Wx = 3,69 cm 3 ex = 2, cm ix = 1,42 cm Iy = 12,03 cm 4 Wy = 4,81 cm 3 еy = 2,36 cm iy = 1,67 cm E rd level transom 55 X 65 Y 6,01 m 1380 g/m 301 mm 159 mm Ix = 24,25 cm 4 Wx = 7,37 cm 3 ex = 2, cm ix = 2,18 cm Iy = 16,64 cm 4 Wy = 6,65 cm 3 еy = 3,29 cm iy = 1,80 cm E rd level transom 75 X 85 Y 6,01 m 1874 g/m 341 mm 199 mm Ix = 58,19 cm 4 Wx = 12,82 cm 3 ex = 2, cm ix = 2,90 cm Iy = 21,49 cm 4 Wy = 8,60 cm 3 еy = 4,54 cm iy = 1,76 cm E rd level transom 95 X 105 Y 6,01 m 2090 g/m 381 mm 239 mm Ix = 102,48 cm 4 Wx = 18,46 cm 3 ex = 2, cm ix = 3,64 cm Iy = 26,10 cm 4 Wy = 10,44 cm 3 еy = 5,55 cm iy = 1,84 cm 3.7
37 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E rd level transom 115 X 125 Y 6,01 m Ix = 162,24 cm g/m Wx = 24,72 cm mm ex = 2, cm 279 mm ix = 4,36 cm Iy = 30,71 cm 4 Wy = 12,29 cm 3 еy = 6,56 cm iy = 1,90 cm E rd level transom 135 X 145 Y 6,01 m 2522 g/m 461 mm 319 mm Ix = 239,09 cm 4 Wx = 31,58 cm 3 ex = 2, cm ix = 5,06 cm Iy = 35,32 cm 4 Wy = 14,13 cm 3 еy = 7,57 cm iy = 1,95 cm E rd level transom 165 X 175 Y 6,01 m 2846 g/m 521 mm 379 mm Ix = 389,88 cm 4 Wx = 42,93 cm 3 ex = 2, cm ix = 6,08 cm Iy = 42,24 cm 4 Wy = 16,90 cm 3 еy = 9,08 cm iy = 2,00 cm E rd level transom 185 X 195 Y 6,01 m 3062 g/m 561 mm 419 mm Ix = 516,42 cm 4 Wx = 51,19 cm 3 ex = 2, cm ix = 6,75 cm Iy = 46,85 cm 4 Wy = 18,74 cm 3 еy = 10,09 cm iy = 2,03 cm E rd level transom 205 X 215 Y 6,01 m 3278 g/m 601 mm 459 mm Ix = 665,65 cm 4 Wx = 60,01 cm 3 ex = 2, cm ix = 7,41 cm Iy = 51,46 cm 4 Wy = 20,58 cm 3 еy = 11,09 cm iy = 2,06 cm E rd level transom 235 X 245 Y 6,01 m 3448 g/m 661 mm 519 mm Ix = 882,24 cm 4 Wx = 71,59 cm 3 ex = 2, cm ix = 8,31 cm Iy = 58,94 cm 4 Wy = 23,58 cm 3 еy = 12,32 cm iy = 2,15 cm 3.8
38 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E rd level hidden transom 21.2 X Y ,01 m Ix = 1,67 cm g/m Wx = 1,54 cm mm ex = 2, cm 91 mm ix = 0,74 cm Iy = 8,74 cm 4 Wy = 3, cm 3 еy = 1,09 cm iy = 1,70 cm E nd level split transom ,01 m 1131 g/m 312 mm 60 mm Ix = 7,62 cm 4 Wx = 3,14 cm 3 ex = 2,40 cm ix = 1,35 cm Iy = 4,98 cm 4 Wy = 2,08 cm 3 еy = 2,43 cm iy = 1,09 cm E rd level split transom ,01 m 1061 g/m 341 mm 77 mm Ix = 19,34 cm 4 Wx = 5,80 cm 3 ex = 2,55 cm ix = 2,22 cm Iy = 5,21 cm 4 Wy = 2,04 cm 3 еy = 3,34 cm iy = 1,15 cm E suppl. profile for E ,01 m 791 g/m 294 mm 13 mm Ix = 8,56 cm 4 Wx = 2,74 cm 3 ex = 3,44 cm ix = 1,71 cm Iy = 6,26 cm 4 Wy = 1,82 cm 3 еy = 3,12 cm iy = 1,46 cm 51 E frame 54.5 X 90.3 Y 6,01 m 1329 g/m 415 mm 186 mm Ix = 38, cm 4 Wx = 7,97 cm 3 ex = 3,19 cm ix = 2,77 cm Iy = 8,12 cm 4 Wy = 1,33 cm 3 еy = 4,83 cm iy = 1,34 cm E frame 49 X 61.4 Y 6,01 m 886 g/m 339 mm 185 mm Ix = 12,87 cm 4 Wx = 3,55 cm 3 ex = 3,10 cm ix = 1,98 cm Iy = 4,62 cm 4 Wy = 1,49 cm 3 еy = 3,62 cm iy = 1,19 cm 3.9
39 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E sash for projected window X Y 6,01 m Ix = 30,66 cm g/m Wx = 7,63 cm mm ex = 2,81 cm 105 mm ix = 2,54 cm Iy = 8,17 cm 4 Wy = 1,99 cm 3 еy = 4,35 cm iy = 1,31 cm E sash for parallel window X Y 6,01 m 1416 g/m 357 mm 104 mm Ix = 30,90 cm 4 Wx = 7,57 cm 3 ex = 2,81 cm ix = 2,53 cm Iy = 8,15 cm 4 Wy = 1,92 cm 3 еy = 4,44 cm iy = 1,30 cm E sash for projected window 55.3 X Y 6,01 m 934 g/m 287 mm 209 mm Ix = 11,78 cm 4 Wx = 3,72 cm 3 ex = 3,49 cm ix = 1,84 cm Iy = 6,71 cm 4 Wy = 1,92 cm 3 еy = 3,17 cm iy = 1,39 cm 57.8 E external glass support ,01 m 208 g/m 99 mm 43 mm E external glass support ,01 m 200 g/m 101 mm 46 mm E 2308 operating rod ,4 m 159 g/m 48 mm 0 mm 3.10
40 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 2309 operating rod ,40 m 197 g/m 55 mm 0 mm E spacer ,01 m 130 g/m 66 mm 0 mm E pressure plate ,01 m 435 g/m 151 mm 0 mm E pressure plate ,01 m 655 g/m 205 mm 0 mm E pressure plate for slope > ,01 m 403 g/m 138 mm 0 mm E pressure plate for slope > ,01 m 416 g/m 113 mm 54 mm 3.11
41 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E pressure plate for angle ,01 m 1034 g/m 305 mm 51 mm E pressure plate for angle ,01 m 1121 g/m 327 mm 63 mm E pressure plate for angle ,01 m 1204 g/m 349 mm 74 mm E pressure plate for angle ,01 m 1291 g/m 371 mm 86 mm E pressure plate for angle ,01 m 1455 g/m 413 mm 106 mm E pressure plate for angle ,01 m 1620 g/m 455 mm 128 mm
42 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E plate for pressure corner ,01 m 510 g/m 170 mm 0 mm E pressure plate for corner ,01 m 8 g/m 169 mm 0 mm E pressure plate ,01 m 384 g/m 169 mm 41 mm E cover cap for E ,01 m 126 g/m 87 mm 37 mm E 857 pressure plate ,01 m 348 g/m 130 mm 42 mm E cover cap for E ,01 m 54 g/m 45 mm 16 mm 3.13
43 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E cover cap 12 6,01 m 289 g/m 144 mm 75 mm E cover cap 15 6,01 m 332 g/m 166 mm 81 mm E cover cap 20 6,01 m 400 g/m 191 mm 91 mm E cover cap 25 6,01 m 432 g/m 211 mm 101 mm E cover cap 30 6,01 m 467 g/m 231 mm 111 mm E cover cap 60 6,01 m 821 g/m 291 mm 171 mm 3.14
44 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E cover cap 165 6,01 m 1779 g/m 6 mm 381 mm E cover cap 25 6,01 m 467 g/m 206 mm 121 mm E cover cap 18 6,01 m 281 g/m 1 mm 77 mm E cover cap 40 6,01 m 462 g/m 231 mm 110 mm E cover cap 100 6,01 m 1207 g/m 337 mm 216 mm E cover cap 160 6,01 m 1627 g/m 453 mm 333 mm 3.15
45 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E cover cap 12 6,01 m 262 g/m 132 mm 67 mm E cover cap corner ,01 m 373 g/m 171 mm 61 mm E cover cap corner ,01 m 446 g/m 206 mm 79 mm E cover cap inox ,01 m - g/m - mm - mm E cover cap inox ,01 m - g/m - mm - mm E transom connector 45.6 X 40 Y 6,01 m 724 g/m 251 mm 0 mm Ix = 3,93 cm 4 Wx = 1,39 cm 3 ex = 2,30 cm ix = 1,21 cm Iy = 8,95 cm 4 Wy = 3,90 cm 3 еy = 2,83 cm iy = 1,83 cm 3.16
46 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E transom connector 45.6 X 45.7 Y 6,01 m 1010 g/m 187 mm 0 mm Ix = 9,79 cm 4 Wx = 4,20 cm 3 ex = 2,28 cm ix = 1,62 cm Iy = 10,20 cm 4 Wy = 4,47 cm 3 еy = 2,33 cm iy = 1,65 cm E base for transom connector 42.6 X Y 6.5 6,01 m 367 g/m 109 mm 0 mm Ix = 0,04 cm 4 Wx = 0,08 cm 3 ex = 2,13 cm ix = 0,16 cm Iy = 2,02 cm 4 Wy = 0,95 cm 3 еy = 0,44 cm iy = 1,22 cm E transom connector 45 X 43.2 Y 2,01 m 1557 g/m 261 mm 0 mm Ix = 10,31 cm 4 Wx = 4,25 cm 3 ex = 2,25 cm ix = 1,34 cm Iy = 12,85 cm 4 Wy = 5,71 cm 3 еy = 2,43 cm iy = 1,49 cm E insert for E X 38.2 Y 2,01 m 1739 g/m 240 mm 0 mm Ix = 9,82 cm 4 Wx = 4,96 cm 3 ex = 2,26 cm ix = 1,24 cm Iy = 11,31 cm 4 Wy = 5,01 cm 3 еy = 1,98 cm iy = 1,33 cm E insert for E X 58.2 Y 2,01 m 2041 g/m 280 mm 0 mm Ix = 31,32 cm 4 Wx = 10,71 cm 3 ex = 2,26 cm ix = 2,04 cm Iy = 13,91 cm 4 Wy = 6,15 cm 3 еy = 2,92 cm iy = 1,36 cm E insert for E X 78.2 Y 2,01 m 2344 g/m 320 mm 0 mm Ix = 67,86 cm 4 Wx = 17,02 cm 3 ex = 2,26 cm ix = 2,80 cm Iy = 16,05 cm 4 Wy = 7,30 cm 3 еy = 3,99 cm iy = 1,38 cm 3.17
47 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E insert for E X 98.2 Y 2,01 m 2646 g/m 360 mm 0 mm Ix = 121,71 cm 4 Wx = 24,17 cm 3 ex = 2,26 cm ix = 3,52 cm Iy = 19,10 cm 4 Wy = 8,45 cm 3 еy = 5,04 cm iy = 1,40 cm E insert for E X Y 2,01 m 3100 g/m 420 mm 0 mm Ix = 239,90 cm 4 Wx = 36,40 cm 3 ex = 2,26 cm ix = 4,57 cm Iy = 22,99 cm 4 Wy = 10,17 cm 3 еy = 6,59 cm iy = 1,42 cm E insert for E X Y 2,01 m 3275 g/m 449 mm 0 mm Ix = 311,58 cm 4 Wx = 42,32 cm 3 ex = 2,21 cm ix = 5,07 cm Iy = 23,06 cm 4 Wy = 10,43 cm 3 еy = 7,36 cm iy = 1,38 cm E insert for E X Y 2,01 m 3532 g/m 488 mm 0 mm Ix = 425,36 cm 4 Wx =,82 cm 3 ex = 2,18 cm ix = 5,70 cm Iy = 24,21 cm 4 Wy = 11,11 cm 3 еy = 8,37 cm iy = 1,36 cm E insert for E X Y 2,01 m 3499 g/m 469 mm 0 mm Ix = 368,85 cm 4 Wx = 46,79 cm 3 ex = 2,16 cm ix = 5,34 cm Iy = 23,17 cm 4 Wy = 10,73 cm 3 еy = 7,88 cm iy = 1,34 cm E insert for polygonal atriums 43.2 X 90 Y 2,01 m 3977 g/m 255 mm 0 mm Ix = 138,19 cm 4 Wx = 30,46 cm 3 ex = 2,16 cm ix = 3,06 cm Iy = 39,69 cm 4 Wy = 18,38 cm 3 еy = 4,54 cm iy = 1,64 cm 3.18
48 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E roof connector/ insert for E X Y 2,01 m 7680 g/m 545 mm 0 mm Ix = 1076,08 cm 4 Wx = 117,52 cm 3 ex = 2,04 cm ix = 5,80 cm Iy = 60,25 cm 4 Wy = 32,79 cm 3 еy = 9,17 cm iy = 1,45 cm E roof connector 45.2 X 216 Y 2,01 m g/m 624 mm 0 mm Ix = 1908,80 cm 4 Wx = 175,48 cm 3 ex = 2,26 cm ix = 6,87 cm Iy = 108,21 cm 4 Wy = 47,88 cm 3 еy = 10,88 cm iy = 1,64 cm E insert for E X 31.9 Y 2,01 m 764 g/m 93 mm 0 mm Ix = 3,26 cm 4 Wx = 2,04 cm 3 ex = 0,78 cm ix = 1,07 cm Iy = 0,81 cm 4 Wy = 1,04 cm 3 еy = 1,60 cm iy = 0,54 cm E insert for E X 51.9 Y 2,01 m 1034 g/m 133 mm 0 mm Ix = 11,95 cm 4 Wx = 4,60 cm 3 ex = 0,78 cm ix = 1,77 cm Iy = 1,24 cm 4 Wy = 1,59 cm 3 еy = 2,60 cm iy = 0,57 cm E insert for E X 71.9 Y 2,01 m 1304 g/m 173 mm 0 mm Ix = 28,29 cm 4 Wx = 7,87 cm 3 ex = 0,78 cm ix = 2,42 cm Iy = 1,67 cm 4 Wy = 2,14 cm 3 еy = 3,60 cm iy = 0,59 cm E insert for E X Y 2,01 m 1709 g/m 233 mm 0 mm Ix = 71,55 cm 4 Wx = 14,04 cm 3 ex = 0,78 cm ix = 3,36 cm Iy = 2,31 cm 4 Wy = 2,97 cm 3 еy = 5,10 cm iy = 0,60 cm 3.19
49 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E spacer 6 mm ,01 m 97 g/m 59 mm 6 mm E 8611 spacer 10 mm ,01 m 130 g/m 82 mm 10 mm E spacer 12 mm ,01 m 140 g/m 90 mm 12 mm E spacer 18 mm ,01 m 200 g/m 98 mm 18 mm E 856 spacer 7, ,01 m 101 g/m 61 mm 6 mm E spacer ,01 m 108 g/m 65 mm 6 mm 3.20
50 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E spacer 22, ,01 m 117 g/m 69 mm 7 mm E spacer ,01 m 128 g/m 75 mm 7 mm E spacer 37, ,01 m 142 g/m 82 mm 8 mm E spacer ,01 m 161 g/m 93 mm 9 mm spacer for structural glazing ,01 m 70 g/m 53 mm 0 mm 3.21
51 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E spacer for structural glazing ,01 m 229 g/m 138 mm 0 mm 33 1 spacer for structural glazing ,01 m 139 g/m 71 mm 0 mm glazing clip for ,01 m 307 g/m 68 mm 0 mm E glazing clip ,01 m 596 g/m 110 mm 0 mm E glazing clip ,01 m 602 g/m 115 mm 0 mm E glazing support ,01 m 383 g/m 122 mm 0 mm 3.22
52 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E glazing support ,01 m 408 g/m 130 mm 0 mm E glazing support ,01 m 446 g/m 142 mm 0 mm E glazing support ,01 m 246 g/m 79 mm 0 mm E glazing support ,01 m 266 g/m 86 mm 0 mm E glazing support ,01 m 306 g/m 99 mm 0 mm X E fixing bracket 106 Y 6,01 m 6468 g/m 776 mm 0 mm Ix = 348,56 cm 4 Wx = 44,06 cm 3 ex = 7,76 cm ix = 3,81 cm Iy = 254,56 cm 4 Wy = 32,82 cm 3 еy = 7,90 cm iy = 3,26 cm
53 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 X E fixing bracket 105 Y 2,01 m 8397 g/m 871 mm 0 mm Ix = 822,14 cm 4 Wx = 74,74 cm 3 ex = 8,00 cm ix = 5,14 cm Iy = 279,77 cm 4 Wy = 37,20 cm 3 еy = 11,00 cm iy = 3,09 cm 220 X E fixing bracket 1 Y 6,01 m g/m 1032 mm 0 mm Ix = 836,65 cm 4 Wx = 79,68 cm 3 ex = 10,76 cm ix = 4,69 cm Iy = 842,12 cm 4 Wy = 78,27 cm 3 еy = 10, cm iy = 4,71 cm 210 X E fixing bracket 140 Y 2,01 m g/m 693 mm 0 mm Ix = 907,18 cm 4 Wx = 86,40 cm 3 ex = 10,23 cm ix = 4,73 cm Iy = 771,28 cm 4 Wy = 75,39 cm 3 еy = 10, cm iy = 4,36 cm 210 X E fixing bracket 100 Y 2,01 m 4892 g/m 494 mm 0 mm Ix = 234,00 cm 4 Wx = 31,20 cm 3 ex = 7,89 cm ix = 3,59 cm Iy = 152,96 cm 4 Wy = 19,39 cm 3 еy = 7, cm iy = 2,91 cm 1 X E fixing bracket 105 Y 2,01 m 3458 g/m 415 mm 0 mm Ix = 85,63 cm 4 Wx = 13,96 cm 3 ex = 7,58 cm ix = 2,59 cm Iy = 135,56 cm 4 Wy = 17,89 cm 3 еy = 6,13 cm iy = 3,25 cm 84 E suppl. profile for fixing bracket ,01 m 313 g/m 65 mm 0 mm 3.24
54 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E suppl. profie for fixing bracket 14.3 X 108 Y 6,01 m 2036 g/m 271 mm 0 mm 7528 insert for E X Y 5,00 m 1847 g/m 239 mm 0 mm Ix = 37,13 cm 4 Wx = 12,38 cm 3 ex = 3,00 cm ix = 2,33 cm Iy = 37,13 cm 4 Wy = 12,38 cm 3 еy = 3,00 cm iy = 2,33 cm 60 E suppl. profile for louvers ,01 m 1246 g/m 207 mm 0 mm E drainage profile ,01 m 240 g/m 122 mm 0 mm E profile for spring connector ,01 m 283 g/m 46 mm 0 mm E spacer for etalbond ,01 m 448 g/m 126 mm 0 mm 3.25
55 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E spacer for etalbond ,01 m 400 g/m 134 mm 0 mm E suppl. profile for sealing membrane ,01m 176 g/m 65 mm 0 mm E suppl. profile for sealing membrane ,01 m 346 g/m 176 mm 0 mm E suppl. profile for sealing membrane ,01 m 381 g/m 170 mm 0 mm E wall attachment profile ,01 m 984 g/m 277 mm 0 mm E wall attachment profile ,01 m 999 g/m 285 mm 0 mm 3.26
56 curtain wall system E 85 code description profile length weight ext. perimeter vis. perimeter statical values E 8700 cover cap anti-burglar ,01 m 479 g/m 231 mm 111 mm E 8701 cover cap anti-burglar ,01 m 460 g/m 223 mm 107 mm E 8620 pressure plate anti-burglar ,01 m 554 g/m 168 mm 0 mm 009 flat bar anti-burglar 10 6,01 m 13 g/m 120 mm 0 mm square tube anti-burglar ,01 m 1816 g/m 182 mm 0 mm Ix = 21,00 cm 4 Wx = 8,84 cm 3 ex = 2,25 cm ix = 1,77 cm Iy = 19,23 cm 4 Wy = 8,55 cm 3 еy = 2,38 cm iy = 1,69 cm E cover cap 100 6,01 m 1312 g/m 388 mm 251 mm 3.27
57 PROFILES DRAWINGS SCALE 1:1
58 curtain wall system code description profile length weight ext. perimeter vis. perimeter statical values E 85 E reinforcement for transom E X 111 Y 6,01 m 2356 g/m 355 mm 0 mm Ix = 127,94 cm 4 Wx = 21,57 cm 3 ex = 2,27 cm ix = 3,83 cm Iy = 28,07 cm 4 Wy = 12,36 cm 3 еy = 5,93 cm iy = 1,79 cm E reinforcement for transom E X 156 Y 6,01 m 2964 g/m 445 mm 0 mm Ix = 310,45 cm 4 Wx = 37,33 cm 3 ex = 2,27 cm ix = 5,32 cm Iy = 37,86 cm 4 Wy = 16,68 cm 3 еy = 8,32 cm iy = 1,86 cm E reinforced glazing support for 2nd level transom 44.4 X 51.5 Y 6,01 m 12 g/m 276 mm 0 mm Ix = 12,08 cm 4 Wx = 4,45 cm 3 ex = 2,22 cm ix = 1,62 cm Iy = 3,44 cm 4 Wy = 1,55 cm 3 еy = 2,72 cm iy = 0,86 cm E reinforced glazing support for 3rd level transom 27.6 X 36 Y 6,01 m 889 g/m 165 mm 0 mm Ix = 3, cm 4 Wx = 1,89 cm 3 ex = 1,38 cm ix = 1,03 cm Iy = 1,18 cm 4 Wy = 0,86 cm 3 еy = 1,84 cm iy = 0,60 cm E reinforcement additional ,01 m 210 g/m 44 mm 0 mm E reinforced transom connector 45.6 X 60 Y 6,01 m 2232 g/m 321 mm 0 mm Ix = 26,27 cm 4 Wx = 7,76 cm 3 ex = 2,28 cm ix = 1,78 cm Iy = 24,34 cm 4 Wy = 10,68 cm 3 еy = 3,89 cm iy = 1,72 cm 3.28
59 curtain wall system E 85 mullions, inserts, connectors and flush transoms 2nd and 3rd level code insert roof connector 2 nd level flush transom 2 nd level flush transom + suppl. Profile 3 rd level flush transom 3 rd level flush hidden transom + suppl. profile E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E
60 curtain wall system E85 mullions insert E E E insert E E E insert E insert E insert E E E insert E E E E insert E insert E insert E E scale 1:
61 curtain wall system E 85 split mullions, inserts and flush transoms 2nd and 3rd level code insert 2 nd level flush transom 2 nd level flush transom + suppl. Profile 3 rd level flush transom 3 rd level flush hidden transom + suppl. profile E E E E E E E E E E E E E E E E E E E E E E E E E E E E
62 curtain wall system E 85 split mullions supplementary profiles for split mullions suppl. profile E 851 E insert E E insert E E insert E E insert E E mullion E suppl. profile E E mullion E scale 1:1 4.4
63 curtain wall system E 85 mullion for substructure & cover cap E E 853 E mullion E E E 85301/E E 85302/E cover cap E E appropriate transom 2nd and 3rd level code 2 nd level transom 3 rd level transom E E E 853/E E E E E scale 1:1 4.5
64 curtain wall system E 85 mullion E insert 7528 insert and flush transoms 2nd and 3rd level code insert 2 nd level flush transom 2 nd level flush transom + suppl. profile 3 rd level flush transom 3 rd level flush hidden transom + suppl. Profile E E E E85601 E E E scale 1:1 4.6
65 curtain wall system E 85 mullion 135 cover cap E pressure plate E insert E E insert and flush transoms 2nd and 3rd level scale 1:1 code insert 2 nd level flush transom 2 nd level flush transom + suppl. Profile 3 rd level flush transom 3 rd level flush hidden transom + suppl. profile E E E E E85601 E E E
66 curtain wall system E
67 curtain wall system E 85 inner supplementary mullion profile 90 pressure plate E any mullion cover cap E E any mullion scale 1:1 4.9
68 curtain wall system E 85 outer supplementary mullion profile 90 cover cap E pressure plate E E pressure plate E spacer E cover cap E any mullion scale 1:1 4.10
69 curtain wall system E 85 flush transoms 2nd and 3rd level code 3 rd level flush transom 2 nd level flush transom + suppl. profile 3 rd level flush hidden transom + suppl. profile E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E
70 curtain wall system E85 2nd level transom 2nd level transoms E E E E E E E E rd level transom 3rd level transoms E 853 E E E E E E E E E E E scale 1:1
71 curtain wall system E 85 2nd level supplementary transoms transom E E E E E rd level hidden transom 11 E scale 1:1
72 curtain wall system E 85 3rd level split transom for conservatory transom E suppl. profile E E supplementary profile for E nd level split transom for conservatory transom E E E scale 1:1 4.14
73 curtain wall system E
74 curtain wall system E
75 curtain wall system E 85 sash profile for projected window extruded al. joint corner bracket or E extruded al. joint corner bracket frame for projected window E extruded al. joint corner bracket extruded al. joint corner bracket or scale 1:1 4.17
76 14 curtain wall system E85 pressure plates E E E E E E E E E scale 1:1
77 curtain wall system E 85 cover caps E E E E scale 1:1
78 curtain wall system E85 cover caps E E E E E E E E E E E E E E E scale 1:1
79 curtain wall system E 85 cover caps & pressure plates cover cap E E cover cap E E E E E inox E inox pressure plate E pressure plate E note: cover caps E and E have to be used with special pressure plate! 51 scale 1:1
80 curtain wall system E 85 spacers for structural glazing 14.8 E glazing clips E E spacers for structural glazing glazing clip for scale 1:1 4.22
81 curtain wall system E 85 transom connectors transom connector E E E base for transom connectors transom connector E E E reinforced transom connector 60 profile for spring connector 45.6 E E scale 1:1 4.23
82 curtain wall system E 85 inserts E E mullion E E mullion E mullion E E mullion E mullion E E mullion E E scale 1:1 4.24
83 curtain wall system E 85 inserts E mullion E E mullion E scale 1:
84 curtain wall system E 85 roof connectors / insert for E mullion E E E scale 1:
85 curtain wall system E 85 inserts for half mullions mullion E E E mullion E E mullion E E mullion E scale 1:1 4.27
86 curtain wall system E 85 reinforcement for transoms E E transom E transom E for transom E only! 45.4 for transom E only! scale 1:1 4.28
87 curtain wall system E 85 spacers E E E E E E E E E E supplementary profile for louvers drainage profile R E E scale 1:1 4.29
88 curtain wall system E 85 2nd level glazing supports a = 32 3rd level glazing supports a = E E a = a = E E a = a = E E E E nd level reinforced glazing support 3rd level reinforced glazing support scale 1:1 code accsessory code utility lenght a loadbearing capacity E mm 1530 N E mm 1200 N E mm 6 N E ,5 mm 1175 N E mm 910 N E ,5 mm 740 N E
89 curtain wall system wall attachment profiles E 85 supplementary profile for holding sealing membrane E E E E E spacers for etalbond structural glazing E E scale 1:1 4.31
90 COVER CAP SECTIONS DETAILS
91 curtain wall system E 85 mullion with 2nd level transom tapping screw DIN 7981 ST5.5x45-C-H cover cap E pressure plate E butyl seal gasket min gasket thermal insulation spacer gasket flange tapping screw DIN 7981 ST4.8x19-C-H fixing part transom E mullion E scale 3/4 E85CP
92 curtain wall system E 85 transom 2nd level drainage cover cap E min 6 pressure plate E gasket butyl seal tapping screw DIN 7981 ST5.5x45-C-H gasket flange fixing part transom E gasket behind thermal insulation spacer glazing shim PVC spacer mullion E note: 1. in case of 2nd level drainage, it is obligatory to use 1 mm butyl seal tape in both directions of the cross zone. see detail E85M8.29 / in case of roof constructions, conservatories, facades with inclinations and polygonal facades with 2nd level drainage, it is obligatory to use butyl seal tape in both directions. scale 3/4 E85CP
93 curtain wall system E 85 transom 2nd level drainage with supplementary transom cover cap E pressure plate E gasket butyl seal tapping screw DIN 7981 ST5.5x45-C-H gasket min 6 15 tapping screw DIN 7981 ST4.8x19-C-H tapping screw DIN 7981 ST4.8x19-C-H transom profile E transom E EPDM flange thermal insulation spacer glazing shim PVC spacer mullion E note: 1. in case of 2nd level drainage, it is obligatory to use 1 mm butyl seal tape in both directions of the cross zone. see detail E85M8.29 / in case of roof constructions, conservatories, facades with inclinations and polygonal facades with 2nd level drainage, it is obligatory to use butyl seal tape in both directions. scale 3/4 E85CP
94 curtain wall system E 85 transom 3rd level drainage cover cap E pressure plate E gasket butyl seal tapping screw DIN 7981 ST5.5x45-C-H gasket glazing shim flange fixing part transom E silicone flange behind thermal insulation spacer PVC spacer 9020 mullion E note: in case of 3rd level drainage, it is obligatory to use butyl seal tape in both directions. scale 3/4 E85CP
95 curtain wall system E 85 projected thermo-break window gasket gasket glass support E gasket cover cap E pressure plate E gasket structural seal 6 mm norton tape 6x6.4 mm butyl seal gasket sash E spacer 700R gasket friction arm 400R/600R operating rod E 2308 striker striker frame E gasket gasket thermal insulation spacer mullion E gasket transom E scale 3/4 E85CP
96 curtain wall system E 85 projected thermo-break window with 2nd level transom gasket /P6 sash E norton tape 6x6.4 mm structural seal 6 mm gasket gasket gasket gasket operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket striker striker frame E gasket transom E glazing shim gasket gasket thermal insulation spacer scale 3/4 E85CP
97 curtain wall system E 85 projected thermo-break window with 3rd level transom norton tape 6x6.4 mm structural seal 6 mm gasket gasket gasket sash E gasket operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket striker striker frame E gasket transom E glazing shim gasket gasket thermal insulation spacer scale 3/4 E85CP
98 curtain wall system E 85 parallel opening thermo-break window gasket gasket glass support E gasket cover cap E pressure plate E structural seal 6 mm gasket norton tape 6x6.4 mm butyl seal sash E gasket friction arm 900R/900L operating rod E 2308 frame E gasket / P gasket thermal insulation spacer gasket transom E gasket mullion E scale 3/4 E85CP
99 curtain wall system E 85 parallel opening thermo-break window with 2nd level transom gasket /P6 sash E norton tape 6x6.4 mm structural seal 6 mm gasket gasket gasket gasket operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket friction arm 900R/900L frame E gasket transom E glazing shim gasket gasket thermal insulation spacer scale 3/4 E85CP
100 curtain wall system E 85 parallel opening thermo-break window with 3rd level transom norton tape 6x6.4 mm structural seal 6 mm gasket gasket gasket / P6 sash E gasket operating rod E 2308 self drilling screw DIN 7981 ST4.8x32-M-Z gasket friction arm 900R/900L frame E gasket transom E glazing shim gasket gasket thermal insulation spacer scale 3/4 E85CP
101 curtain wall system E 85 projected window tapping screw DIN 7981 ST5.5x45-C-H cover cap E thermal insulation spacer thermal insulation spacer pressure plate E structural seal 6 mm butyl seal norton tape 6x6.4 mm gasket profile 8902 gasket friction arm 400R/600R sash E gasket frame E gasket gasket transom E gasket gasket spacer E mullion E scale 3/4 E85CP
102 curtain wall system E 85 projected window with 2nd level transom gasket gasket sash E norton tape 6x6.4 mm structural seal 6 mm gasket gasket frame E gasket spacer E thermal insulation spacer gasket thermal insulation spacer butyl seal tapping screw DIN 7981 ST5.5x45-C-H gasket transom E mullion E scale 3/4 E85CP
103 curtain wall system E 85 projected window with 3rd level transom gasket gasket sash E norton tape 6x6.4 mm structural seal 6 mm gasket gasket frame E gasket gasket butyl seal thermal insulation spacer gasket thermal insulation spacer tapping screw DIN 7981 ST5.5x45-C-H transom E mullion E scale 3/4 E85CP
104 curtain wall system E 85 window in curtain wall thermal insulation spacer gasket additional profile E gasket cover cap E pressure plate E gasket gasket gasket gasket gasket glazing bead gasket sash E 2482 gasket frame E transom E mullion E scale 3/4 E85CP
105 curtain wall system E 85 window in curtain wall with 2nd level transom 28 gasket gasket glazing bead gasket gasket additional profile E gasket sash E 2482 gasket frame E 2424 gasket tapping screw DIN 7981 ST5.5x45-C-H glazing shim PVC spacer 9020 thermal insulation spacer transom E gasket mullion E scale 3/4 E85CP
106 curtain wall system E 85 window in curtain wall with 3rd level transom gasket gasket glazing bead gasket gasket additional profile E gasket sash E 2482 gasket frame E 2424 gasket tapping screw DIN 7981 ST5.5x45-C-H glazing shim PVC spacer 9020 thermal insulation spacer transom E gasket scale 3/4 mullion E E85CP
107 curtain wall system E 85 door in curtain wall cover cap E pressure plate E tapping screw DIN 7981 ST5.5x45-C-H thermal insulation spacer gasket gasket gasket gasket gasket glazing bead E 5307 sash E 2443 gasket frame E butil seal gasket gasket transom E mullion E scale 3/4 E85CP
108 curtain wall system E 85 door in curtain wall with 2nd level transom tapping screw DIN 7981 ST5.5x45-C-H thermal insulation spacer glazing shim transom E gasket gasket mullion E frame E 2445 gasket sash E 2443 glazing bead E 5307 scale 3/ gasket gasket E85CP
109 curtain wall system E 85 door in curtain wall with 3rd level transom tapping screw DIN 7981 ST5.5x45-C-H gasket thermal insulation spacer glazing shim transom E gasket gasket frame E 2445 mullion E gasket sash E 2443 glazing bead E 5307 scale 3/ gasket gasket E85CP
110 curtain wall system E 85 split mullion tapping screw DIN 7981 ST5.5x45-C-H cover cap E pressure plate E butyl seal gasket min gasket thermal insulation spacer gasket flange tapping screw DIN 7981 ST4.8x19-C-H gasket gasket supplementary profile E 851 mullion E fixing part transom E self-drilling screw DIN 7981 ST3.5x18-M-Z supplementary profile E gasket scale 3/4 E85CP
111 curtain wall system E
112 curtain wall system E
113 curtain wall system E 85 outer corner seal 10 mm silicone coating soft insulation 40 mm etalbond min min mullion E tapping screw DIN 7981 ST4.8x19-C-H gasket gasket transom E note: it is necessary to calculate measures for each project scale 3/4 E85CP
114 curtain wall system E 85 outer corner etalbond hard insulation thermal insulation spacer suppl. mullion profile E gasket spacer E tapping screw DIN 7981 ST5.5x45-C-H scale 3/4 transom E E85CP
115 curtain wall system E
116 curtain wall system outer corner 90 E tapping screw DIN 7981 ST5.5x45-C-H max thermal Insulation spacer gasket welded seam 3 mm seal 10 mm seal 10 mm min flange max 0 transom E mullion E note: the glass thickness should be checked by the facade engineer not to scale E85CP
117 curtain wall system E
118 curtain wall system E 85 inner corner gasket cover cap E pressure plate E suppl. mullion profile E thermal insulation spacer tapping screw DIN 7981 ST5.5x45-C-H tapping screw DIN 7981 ST5.5x16-C-H scale 3/4 E85CP
119 curtain wall system E
120 curtain wall system E 85 inner corner tapping screw DIN 7981 ST5.5x38-C-H cover cap E pressure plate E gasket thermal insulation spacer mullion E gasket flange tapping screw DIN 7981 ST4.8x19-C-H 135 transom E scale 3/4 E85CP
121 curtain wall system E 85 outer corner L-profile section 4134 etalbond soft insulation cover cap E tapping screw DIN 7981 ST5.5x38-C-H pressure plate E butyl seal gasket butyl seal self drilling screw DIN 7981 ST4.8x19-M-Z transom E split rotating mullion E suppl. mullion E tapping screw DIN 7981 ST5.5x32-C-H mullion E scale 3/4 E85CP
122 curtain wall system E 85 polygonal facade with outer angle max tapping screw DIN 7981 ST5.5x45-C-H cover cap E pressure plate E butyl seal gasket gasket thermal insulation spacer flange transom E mullion E polygonal facade with inner angle max tapping screw DIN 7981 ST5.5x45-C-H cover cap E pressure plate E butyl seal gasket gasket thermal insulation spacer flange transom E mullion E scale 3/4 E85CP
123 curtain wall system E 85 outer angles 0 ~15 tapping screw DIN 7981 ST5.5x55-C-H cover cap E pressure plate E butyl seal gasket gasket spacer E 856 thermal insulation spacer outer angles 7.5 ~22.5 tapping screw DIN 7981 ST5.5x55-C-H cover cap E pressure plate E butyl seal gasket gasket spacer E scale 3/4 thermal insulation spacer E85CP
124 curtain wall system E 85 outer angles 15 ~30 tapping screw DIN 7981 ST5.5x60-C-H cover cap E pressure plate E butyl seal gasket thermal insulation spacer gasket spacer E outer angles 22.5 ~37.5 tapping screw DIN 7981 ST5.5x60-C-H cover cap E pressure plate E butyl seal gasket thermal insulation spacer gasket spacer E scale 3/4 E85CP
125 curtain wall system E 85 outer angles 30 ~45 tapping screw DIN 7981 ST5.5x60-C-H cover cap E pressure plate E butyl seal gasket thermal insulation spacer gasket spacer E outer angles 37.5 ~52.5 tapping screw DIN 7981 ST5.5x60-C-H cover cap E pressure plate E butyl seal thermal insulation spacer gasket gasket spacer E 85655` scale 3/4 E85CP
126 curtain wall system E 85 roof connector tapping screw DIN 7981 ST5.5x68-C-H cover cap E pressure plate E butyl seal gasket thermal insulation spacer gasket spacer E transom E mullion connector E below mullion E scale 3/4 E85CP
127 5.37 scale 1: tapping screw DIN 7981 ST5.5x45-C-H cover cap E pressure plate E butyl seal gasket gasket thermal insulation spacer gasket flange transom E mullion E gypsum board soft insulation mm connection between curtain wall and partition wall curtain wall system E 85 E85CP5.37
128 5.38 scale 1:2 transom E gasket flange mullion E gasket tapping screw DIN 7981 ST5.5x45-C-H cover cap E pressure plate E butyl seal gasket thermal insulation spacer bracket thermal insulation spacer sheet aluminium 2 mm membrane 2 mm insulation soft delatation curtain wall system E 85 E85CP5.38
129 curtain wall system E 85 connection with backing wall concrete wall membrane 2 mm hard insulation mm plaster seal 2 mm etalbond butyl seal gasket thermal insulation spacer additional profile E scale 3/4 E85CP
130 curtain wall system E
131 curtain wall system E 85 connection with rainscreen cladding system Forte stone 8 forte system by ETEM metal aluminum sheet hard insulation membrane soft insulation additional profile E suppl. profile E scale 3/4 E85CP
132 curtain wall system E 85 conservatories vertical section with 2nd level transom 135 cover cap E thermal insulation spacer tapping screw DIN 7981 ST5.5x38-C-H pressure plate E butyl seal etalbond hard insulation 17 mm membrane 1 mm gasket glazing shim transom E gasket tapping screw DIN 7981 ST5.5x38-C-H thermal insulation spacer accessory gasket machine cutting for transom slot scale 3/4 E85CP
133 curtain wall system E 85 conservatories vertical section with 3rd level transom cover cap E thermal insulation spacer tapping screw DIN 7981 ST5.5x38-C-H pressure plate E butyl seal etalbond hard insulation 30 mm membrane 1 mm gasket transom E suppl. profile E glazing shim tapping screw DIN 7981 ST5.5x38-C-H thermal insulation spacer gasket accessory scale 3/ E85CP
134 curtain wall system E 85 conservatories vertical section 90-1 pressure plate E cover cap E self-drilling screw DIN 7981 ST4.8x19-M-Z thermal insulation spacer gasket glazing shim tapping screw DIN 7981 ST5.5x38-C-H mullion is trimmed 4 4 etalbond hard insulation 26 mm membrane 1 mm etalbond thermal insulation spacer cut for membrane in mullion F profile tapping screw DIN 7981 ST4.2x25-C-H 5 tapping screw DIN 7981 ST5.5x38-C-H thermal insulation spacer gasket not to scale E85CP
135 curtain wall system E 85 conservatories vertical section 115 pressure plate E cover cap E thermal insulation spacer tapping screw DIN 7981 ST5.5x38-C-H gasket glazing shim seal 10 mm mullion connector E below seal 10 mm tapping screw DIN 7981 ST5.5x38-C-H glazing shim thermal insulation spacer gasket note: the glass thickness should be checked by the facade engineer scale 3/4 E85CP
136 curtain wall system E 85 conservatories vertical section tapping screw DIN 7981 ST4.2x32-C-H soft insulation 40 mm seal 10 mm silicone coating etalbond note: the glass thickness should be checked by the facade engineer scale 3/4 E85CP
137 curtain wall system E 85 slope > 25 tapping screw DIN 7981 ST5.5x45-C-H butyl seal cover cap E pressure plate E gasket > gasket thermal insulation spacer glazing shim transom E mullion E scale 3/4 E85CP
138 >15 curtain wall system E 85 slope > 15 pressure plate E tapping screw DIN 7981 ST5.5x45-C-H gasket silicone gasket gasket thermal insulation spacer glazing shim transom E mullion E scale 3/4 E85CP
139 >7 curtain wall system E 85 slope > 7 flat bar 9070 / x2 mm tapping screw DIN 7981 ST5.5x45-C-H silicone gasket butyl seal gasket thermal insulation spacer glazing shim transom E mullion E scale 3/4 E85CP
140 curtain wall system E 85 connection with backing wall aluminium sheet 1.5 mm seal 5 mm hard insulation mm aluminium sheet 1.5 mm membrane 1 mm hard insulation 25 mm membrane 1 mm hard insulation 31.5 mm self-drilling screw DIN 7981 ST4.2x16-O-Z bracket E reinforced concrete not to scale 40 E85CP5. 5.
141 curtain wall system E 85 bottom finishing water drainage gasket thermal insulation spacer additional profile E cut for membrane in mullion etalbond hard insulation 60 mm bracket 71 0 hard insulation membrane 30 plaster hard insulation mm scale 3/4 E85CP
142 curtain wall system E 85 bottom finishing water drainage vapor barrier membrane aluninium sheet thermal insulation spacer tile hard insulation additional profile E cut for membrane in mullion membrane ground tiles scale 1:2 E85CP
143 curtain wall system E 85 finishing to suspended ceiling water drainage mullion E transom E gasket glazing shim butyl seal sheet steel 1.5 mm tapping screw DIN 7981 ST5.5x45-C-H thermal insulation spacer thermal insulation spacer additional profile E cut for membrane in mullion etalbond bracket washer DIN 440 membrane concrete slab hard insulation 60 mm perforation tube aluminum 60x30x2 self-drilling screw DIN 7981 ST5.5x19-M-Z vivo system by ETEM not to scale E85CP
144 curtain wall system E 85 finishing of plaster ceiling L-profile section 4065 self-drilling screw DIN 7981 ST4.8x19-M-Z 90 etalbond membrane membrane additional profile E hard insulation 32 mm thermal insulation spacer bracket 71 0 transom E mullion E gasket thermal insulation spacer scale 3/4 E85CP
145 curtain wall system E 85 outer angle vertical section gasket thermal insulation spacer tapping screw DIN 7981 ST5.5x45-C-H thermal insulation spacer hard insulation 20 mm etalbond mullion E mullion connector E below not to scale E85CP
146 curtain wall system E 85 inner angle vertical section mullion E mullion connector E below tapping screw DIN 7981 ST5.5x45-C-H 15 thermal insulation spacer gasket not to scale E85CP
147 scale 1:2 3M tape profile E 8656 profile E 8863 glass spandrel panel in brustung zone curtain wall system thermal insulation spacer transom E sheet steel 2 mm laminated glass soft insulation bracket washer DIN 440 steel sheet 2 mm fire resistant silicone (12 C) perforation mullion E min 30 4 transom E glazing shim butyl seal tapping screw DIN 7981 ST5.5x45-C-H gasket thermal insulation spacer E85 E85CP5.57
148 curtain wall system E85
149 scale 1:2 transom E gasket etalbond spandrel panel in brustung zone curtain wall system glazing shim gasket membrane butyl seal tapping screw DIN 7981 ST5.5x45-C-H thermal insulation spacer gasket min 5 thermal insulation spacer aluminium sheet 2 mm etalbond steel sheet 2 mm soft insulation 130 bracket washer DIN 440 steel sheet 2 mm fire resistant silicone (12 C) mullion E transom E thermal insulation spacer gasket butyl seal tapping screw DIN 7981 ST5.5x45-C-H gasket membrane thermal insulation spacer gasket E85 E85CP5.59
150 scale 1:2 soft insulation connection with rainscreen system Forte curtain wall system forte system by ETEM hard insulation membrane thermal insulation spacer thermal insulation spacer pressure plate E cover cap E transom E bracket gasket gasket glazing shim transom E thermal insulation spacer pressure plate E glazing shim gasket transom E cover cap E bracket 71 0 membrane 47 additional profile E metal aluminum sheet bracket E forte system by ETEM membrane E85 E85CP5.60
151 curtain wall system E 85 usage of hidden transom on floor level gasket transom E self-drilling screw DIN 7981 ST4.8x19-M-Z steel sheet 2 mm waterproof gypsum board washer DIN 440 bracket steel sheet 2 mm soft insulation fire resistant silicone (12 C) min mullion E transom E gasket glazing shim butyl seal tapping screw DIN 7981 ST5.5x45-C-H gasket thermal insulation spacer not to scale E85CP
152 curtain wall system E 85 upper finishing with etalbond 10 min 6 etalbond membrane thermal insulation spacer thermal insulation spacer soft insulation gypsum board min 30 bracket gasket glazing shim mullion E not to scale thermal insulation spacer tapping screw DIN 7981 ST5.5x45-C-H transom E E85CP
153 STRUCTURAL GLAZING SECTIONS DETAILS
154 curtain wall system E 85 mullion with 2nd level transom silicone seal silicone gasket tapping screw DIN 7982 ST5.5x25-C-H glazing clip spacer E gasket gasket flange tapping screw DIN 7981 ST4.8x19-C-H fixing part transom E mullion E scale 3/4 E85SG
155 curtain wall system E 85 transom 2nd level drainage spacer E glazing clip gasket flange mullion E glazing shim tapping screw DIN 7982 ST5.5x25-C-H 56.3 fixing part transom E gasket behind thermal insulation spaser / silicone gasket silicone seal note: spacer E has to be used only with 2nd level transoms scale 3/4 E85SG
156 curtain wall system E 85 mullion with 2nd level transom 15 min silicone seal silicone gasket thermal insulation spaser / tapping screw DIN 7982 ST5.5x25-C-H glazing clip spacer M tape min gasket gasket flange tapping screw DIN 7981 ST4.8x19-C-H fixing part transom E mullion E scale 3/4 E85SG
157 curtain wall system E 85 transom 2nd level drainage spacer glazing clip gasket flange glazing shim thermal insulation spaser / tapping screw DIN 7981 ST5.5x25-C-H 56.3 min 6 fixing part transom E gasket behind silicone gasket silicone seal mullion E scale 3/4 E85SG
158 curtain wall system E 85 transom 3rd level drainage spacer glazing clip gasket glazing shim flange thermal insulation spaser / tapping screw DIN 7981 ST5.5x25-C-H 56.3 min 6 fixing part transom E silicone flange behind silicone gasket silicone seal mullion E scale 3/4 E85SG
159 curtain wall system E 85 projected thermo-break window thermal insulation spacer / glass support E silicone seal silicone gasket gasket gasket structural seal 6 mm norton tape 6x6.4 mm tapping screw DIN 7981 ST5.5x25-C-H glazing clip spacer M tape gasket sash E spacer 700R gasket friction arm 400R/600R operating rod E 2308 striker striker frame E gasket gasket transom E mullion E scale 3/4 E85SG
160 curtain wall system E 85 projected thermo-break window with 2nd level transom gasket sash E norton tape 6x6.4 mm structural seal 6 mm gasket glass support E gasket gasket operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket striker striker frame E transom E glazing shim min 6 fixing part transom E gasket behind gasket silicone gasket silicone seal mullion E scale 3/4 130 E85SG
161 curtain wall system E 85 projected thermo-break window with 3rd level transom gasket sash E norton tape 6x6.4 mm structural seal 6 mm gasket glass support E gasket gasket operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket striker striker frame E transom E glazing shim min flange fixing part gasket behind gasket silicone gasket silicone seal mullion E scale 3/ E85SG
162 curtain wall system E 85 parallel opening thermo-break window silicone seal glass support E gasket gasket structural seal 6 mm norton tape 6x6.4 mm silicone gasket / tapping screw DIN 7981 ST5.5x25-C-H glazing clip spacer M tape gasket / P6 9.2 sash E gasket gasket friction arm 900R/900L operating rod E gasket frame E gasket transom E mullion E scale 3/4 E85SG
163 curtain wall system E 85 parallel opening thermo-break window with 2nd level transom norton tape 6x6.4 mm structural seal 6 mm gasket glass support E gasket gasket / P6 sash E gasket operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket friction arm 900R/900L frame E transom E / glazing shim min 6 fixing part flange gasket behind gasket silicone gasket silicone seal mullion E scale 3/4 E85SG
164 curtain wall system E 85 parallel opening thermo-break window with 3rd level transom gasket / P6 sash E norton tape 6x6.4 mm structural seal 6 mm gasket glass support E gasket gasket operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket friction arm 900R/900L frame E transom E glazing shim / min flange fixing part gasket behind gasket glazing clip silicone gasket silicone seal mullion E scale 3/4 E85SG
165 curtain wall system E
166 curtain wall system E
167 curtain wall system E 85 window in curtain wall gasket gasket glazing bead gasket gasket sash E 2482 additional profile E gasket gasket frame E 2424 glazing shim transom E gasket mullion E scale 3/ E85SG
168 curtain wall system E 85 outer corner silicone seal silicone gasket tapping screw DIN 7981 ST5.5x25-C-H glazing clip etalbond hard insulatin spacer M tape gasket suppl. mullion profile E spacer E tapping screw DIN 7981 ST5.5x45-C-H transom E scale 3/4 E85SG
169 curtain wall system E
170 curtain wall system E 85 inner corner aluminium tube 7027 silicone seal silicone gasket thermal insulation spacer / tapping screw DIN 7981 ST5.5x25-C-H glazing clip spacer M tape gasket etalbond welded seam 3 mm transom E flange mullion E scale 1:2 E85SG
171 curtain wall system E 85 inner corner silicone seal silicone gasket thermal insulation spacer / glazing clip spacer M suppl. mullion profile E tapping screw DIN 7981 ST5.5x16-C-H gasket spacer E scale 3/4 E85SG
172 curtain wall system E 85 polygonal facade with outer angle max 5 20 silicone seal silicone gasket thermal insulation spaser / tapping screw DIN 7981 ST5.5x25-C-H glazing clip gasket flange transom E mullion E polygonal facade with inner angle max silicone seal silicone gasket thermal insulation spaser / tapping screw DIN 7981 ST5.5x25-C-H glazing clip gasket flange transom E mullion E scale 3/4 E85SG
173 curtain wall system E 85 conservatories vertical section 90-1 gasket self-drilling screw DIN 7981 ST4.8x19-M-Z gasket glazing shim mullion is trimmed 4 4 etalbond hard insulation membrane 1 mm etalbond thermal insulation spacer cut for membrane in mullion F profile gasket tapping screw DIN 7981 ST4.2x25-C-H 5 20 silicone seal silicone gasket glazing clip spacer gasket not to scale E85SG
174 curtain wall system E 85 conservatories vertical section seal 10 mm gasket glazing shim seal 10 mm 64 mullion connector E below silicone seal glazing shim silicone gasket glazing clip spacer gasket note: the glass thickness should be checked by the facade engineer not to scale E85SG
175 curtain wall system E
176 curtain wall system E 85 connection with backing wall etalbond bravo system by ETEM silicone seal silicone gasket thermal insulation spaser / tapping screw DIN 7981 ST5.5x25-C-H glazing clip spacer M tape membrane 1 mm gasket additional profile E scale 3/4 E85SG
177 curtain wall system E 85 bottom finishing gasket glazing clip thermal insulation spacer / silicone seal 20 silicone gasket thermal insulation spacer additional profile E cut for membrane in mullion concrete slab etalbond bracket soft insulation 60 mm membrane L-profile section 4065 self-drilling screw DIN 7981 ST4.8x19-M-Z seal 6 mm plaster perforation hard insulation scale 1:2 E85SG
178 curtain wall system E 85 facade finishing to suspended ceiling spacer glazing clip gasket flange glazing shim steel sheet 1.5 mm thermal insulation spacer additional profile E cut for membrane in mullion accessory bracket washer DIN 440 hard insulation membrane concrete slab etalbond not to scale perforation self-drilling screw DIN 7981 ST4.8x19-M-Z L-profile section aluminum E85SG
179 curtain wall system E 85 finishing of plaster ceiling L-profile section 4065 self-drilling screw DIN 7981 ST4.8x19-M-Z etalbond membrane membrane additional profile E hard insulation thermal insulation spacer bracket 71 0 transom E mullion E gasket scale 3/ E85SG
180 curtain wall system E 85 etalbond spandrel panel in brustung zone spacer glazing clip gasket flange glazing shim transom E steel sheet 2 mm self-drilling screw DIN 7981 ST4.8x16-M-Z self-drilling screw DIN 7981 ST4.8x19-M-Z thermal insulation spacer etalbond 88 soft insulation bracket washer DIN 440 steel sheet 2 mm self-drilling screw DIN 7981 ST4.8x16-M-Z mullion E transom E thermal insulation spacer not to scale E85SG
181 curtain wall system E 85 upper finishing with etalbond glazing clip gasket soft insulation gypsum board min 30 bracket washer DIN 440 not to scale mullion E transom E E85SG
182 COMBINATIONS SECTIONS DETAILS
183 curtain wall system E 85 combined facade with vertical cap and horizontal silicone joint tapping screw DIN 7981 ST5.5x45-C-H cover cap E pressure plate E butyl seal gasket min gasket gasket thermal insulation spacer gasket flange tapping screw DIN 7981 ST4.8x19-C-H fixing part transom E mullion E scale 3/4 E85K
184 curtain wall system E 85 combined facade with vertical cap and horizontal silicone joint spacer glazing clip gasket glazing shim flange thermal insulation spaser / min 6 5 tapping screw DIN 7981 ST5.5x25-C-H 56.3 min 6 fixing part transom E silicone flange behind silicone gasket silicone seal mullion E scale 3/4 E85K
185 curtain wall system E 85 combined facade with vertical cap and horizontal silicone joint with projected thermo-break window gasket gasket glass support E gasket structural seal 6 mm norton tape 6x6.4 mm tapping screw DIN 7981 ST5.5x45-C-H cover cap E pressure plate E butyl seal gasket gasket gasket / P6 sash E spacer 700R gasket friction arm 400R/600R 9 operating rod E 2308 striker striker frame E gasket gasket transom E mullion E scale 3/4 E85K
186 curtain wall system E 85 combined facade with vertical cap and horizontal silicone joint with 3rd level transom and projected thermo-break window gasket / P6 sash E norton tape 6x6.4 mm structural seal 6 mm gasket glass support E gasket gasket operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket striker striker frame E transom E min 6 5 glazing shim glazing clip thermal insulation spaser / min flange fixing part gasket behind gasket silicone gasket silicone seal mullion E scale 3/4 E85K
187 curtain wall system E 85 combined facade with vertical silicone joint and horizontal cap min silicone seal silicone gasket thermal insulation spaser / tapping screw DIN 7981 ST5.5x25-C-H glazing clip spacer min 6 tape gasket gasket flange tapping screw DIN 7981 ST4.8x19-C-H fixing part transom E mullion E scale 3/4 E85K
188 curtain wall system E 85 combined facade with vertical silicone joint and horizontal cap cover cap E pressure plate E gasket butyl seal tapping screw DIN 7981 ST5.5x45-C-H gasket glazing shim flange fixing part transom E silicone flange behind thermal insulation spacer PVC spacer mullion E scale 3/4 E85K
189 curtain wall system E 85 combined facade with vertical silicone joint and horizontal cap with parallel opening thermo-break window silicone seal glass support E gasket gasket silicone gasket tapping screw DIN 7981 ST5.5x25-C-H glazing clip structural seal 6 mm norton tape 6x6.4 mm min 6 spacer gasket sash E gasket gasket friction arm 900R/900L operating rod E gasket frame E transom E mullion E scale 3/4 E85K
190 curtain wall system E 85 combined facade with vertical silicone joint and horizontal cap with 3rd level transom and parallel opening thermo-break window norton tape 6x6.4 mm structural seal 6 mm gasket gasket gasket gasket sash E gasket operating rod E 2308 self-drilling screw DIN 7981 ST4.8x32-M-Z gasket friction arm 900R/900L frame E transom E gasket glazing shim gasket gasket thermal insulation spacer scale 3/4 E85K
191 curtain wall system E
192 curtain wall system E
193 MACHININGS MACHINING PROCESSING
194 curtain wall system E 85 cutting lengths L transom pressure plate cover cap not to scale E85M
195 curtain wall system E
196 curtain wall system E
197 curtain wall system E 85 machinings of transom 2nd level drainage with T-joint and flange mullion flange T-joint 18 transom 15 gasket tapping screw DIN 7981 ST4.8x19-C-H transom flange T-joint E E E E E E not to scale E85M
198 curtain wall system E 85 machinings of transom 2nd level drainage with T-joint and flange mullion flange T-joint 18 transom 6 silicone flange tapping screw DIN 7981 ST4.8x19-C-H transom flange T-joint E E E E E E E E E E not to scale E85M
199 curtain wall system E 85 machinings of transom 2nd level drainage with transom connectors mullion flange T-joint 17 transom gasket tapping screw DIN 7981 ST4.8x19-C-H transom flange T-joint E E not to scale E85M
200 curtain wall system E 85 machinings of transom 3rd level drainage with transom connectors mullion flange T-joint 17 transom silicone flange tapping screw DIN 7981 ST4.8x19-C-H transom flange T-joint E E not to scale E85M
201
202 curtain wall system E
203 curtain wall system E 85 fixing of 3rd level transom using transom connector E at angle 90 mullion a = 0 ~ 60 butyl seal between mullion and transom X = (D-20) + x sin(a ) cos(a ) transom connector E a tapping screw DIN 7981 ST4.8x19-C-H tapping screw DIN 7981 ST4.8x19-C-H b tapping screw DIN 7981 ST4.8x38-C-H transom 90-a transom b, mm E E E E E E E E E E not to scale E85M
204 curtain wall system E 85 transom connector E Fixing devices have to be placed coaxially even though transoms are not parallel. Distance between fixing devices must be evaluated according to the following diagram, so that to achieve smooth transition of the external webs of every transom a( ) a = 0 ~ 60 a Capability of fastening transom by screws on the frontal face of fixing device 90-a In order to achieve optimum result in terms of aesthetics, the axis of the rotated transom must always be in accordance to the diagram above,depending on the angle of rotation, so that the centre of rotation of the transom is at the intersection of the axes of rotated and non rotated transoms not to scale a E85M
205 curtain wall system E 85 connection between transom E and supplementary transom to mullion supplementary transom E E E E flange supplementary transom 76 6 tapping screw DIN 7982 ST4.8x19-C-H not to scale tapping screw DIN 7981 ST4.8x19-C-H E85M
206 8.13 H 120 H 120 H 120 not to scale B 158 B 210 B 220 L 105 L L H 90 H 90 H 90 B 158 B 220 B 210 L 105 L L H 115 H 115 H 115 B 158 B 220 B 210 L 106 L L H 72 H 72 H 72 B 158 B 220 B 210 L 105 L L fixed support movable support H 65 H 65 H 65 B 158 B 210 B 220 L 105 L L fixing brackets curtain wall system E 85 E85M8.13
207 min 120 curtain wall system E 85 fixing brackets B 84 L B 84 L H 115 H 120 H 90 B 84 L B 84 L 105 H 65 H 72 B 84 L fixed support H movable support H/2 not to scale E85M
208 curtain wall system E 85 Е Е Е Е Мх Е Е Е Е 8.15
209 curtain wall system E
210 curtain wall system E
211 min 120 curtain wall system E 85 fixing brackets or E profile 43.2 nut М12 washer ø12 H 90 H 140 E profile B 220 B 210 anchor М12х123 set for bracket as a hidden support DIN 440 nut М10 bush ø15x / 2pc. anchor M12x123 washer ø10 bolt М10x70 min 120 min 120 min 120 min 120 H/2 H note: accessories from profiles E and E can be produced and delivered with the machinings, after ordering and specifing the mullion. not to scale E85M
212 curtain wall system E
213 curtain wall system E
214 curtain wall system E 85 condensation water drainage water drainage *upside down fill with silicone here drainage profile max 8 m max 8 m max 8 m 30 drainage profile not to scale pressure plate 12 E85M
215 curtain wall system E 85 bottom finishing cut for membrane mullion mullion 27 4 transom add. profile E cut for membrane in mullion bracket 71 0 membrane concrete slab not to scale E85M
216 curtain wall system E
217 curtain wall system E
218 curtain wall system E
219 curtain wall system E
220 curtain wall system E
221 curtain wall system E
222 curtain wall system E 85 fixing of E to E pressure plate E pressure plate E cap E cap E tapping screw DIN 7981 ST3.5x13-C-H note: all big cover caps (E 85723, E85724, E85716, E85718) have to be used with pressure plate E85745 and to be fastened with screws not to scale E85M
223 curtain wall system E
224 curtain wall system E 85 structural glazing assembly mullion gasket thermal insulation spacer glazing clip tapping screw DIN ISO 70 ST5.5x22-C-H thermal insulation spacer spacer not to scale E85M
225 curtain wall system E 85 projected window fixings and machinings E E scale 1:2 scale 1: not to scale E85M
226 curtain wall system E 85 machining of drainage opening not to scale E85M
227 curtain wall system E
228 curtain wall system E
229 curtain wall system E 85 profiles for projected window glass support E glass support E glass support E structural glazing silicone glass support E structural glazing silicone tapping screw DIN 7982 ST3.5x13-C-H tapping screw DIN 7982 ST3.5x13-C-H not to scale E85M
230 curtain wall system E 85 required machinings of gaskets and for projected window used in two sided curtain wall note: cutting of EPDM and has to be performed with patterns and not to scale E85M
231 curtain wall system E 85 projected opening window 800R - set of nuts for 400R and 600R blind rivet nut M5-14 pcs screw M5x16-6 pcs countersunk screw M5x20-8 pcs arm for projected window code type length, mm angle of height of opening, frame, mm load, kg 400 R adjustable R adjustable not to scale E85M
232 curtain wall system E 85
233 curtain wall system E
234 curtain wall system E
235 ACCESSORIES IMAGES DESCRIPTIONS
236 ET MF ET MF ET MF ET MF
237 ET MF ET MF ET MF ET MF
238 ET MF ET MF ET MF ET MF
239 ET MF ET MF ET MF ET MF
240 ET MF ET MF ET MF ET MF
241 ET MF ET MF ET MF ET MF
242 ET MF ET MF ET MF ET MF
243 DIN440 MF 07M12123S 1 MF DIN MF DIN MF
244 ET MF ET ET ET076651
245 ET ET m ET MF ET
246 ET ET ET ET
247 ET ET ET ET
248 ET ET ET ET
249 ET ET ET ET
250 ET ET ET ET
251 ET ET MF ET MF ET MF
252 ET MF ET MF ET MF ET MF
253 ET MF ET MF ET MF ET MF
254 ET MF ET MF ET MF ET MF
255 ET MF ET MF ET MF ET MF
256 ET MF ET MF ET MF
257 ET MF ET MF ET MF ET MF
258 ET MF ET MF ET MF ET MF
259 ET MF ET MF ET MF ET MF
260 ET MF die custd aluminium ET MF ET MF ET MF
261 ET MF ET MF
262 ET ET ET ET
263 ET ET ET ET
264 ET ET ET ET
265 ET ET ET ET
266 ET pressure plate ET ET ET
267 ET ET ET ET
268 ET /pcs ET ET
269 ET ET ET ET
270 ET ET ET
271 GI MF GI GI BE400R 10 MF 80 kg for 85
272 BE600R 10 MF 130 kg for 85 BE900R 10 MF for 85 BE700R 100 MF BE800R 100 MF
273 FIG 1
274 pening angle BE800R
information information
Technicalinformation Technicalinformation technicalinformation SYSTEM 40C GENERAL GROPERTIES 1 Glazing: from 4 to 22 mm 2 E.P.D.M. Sealing Gasket 3 Efficent drainage of the vent section 4 Efficent chamber
More informationPlaisance 50. Windows and doors. Sapa Building System
Plaisance 50 Windows and doors Sapa Building System Plaisance 50 is a non-thermally broken system for aluminium windows and doors with a building depth. The system offers a wide range of inward and outward
More informationElegance 52. Curtain Walling. Sapa Building System
Elegance 52 Curtain Walling Sapa Building System Elegance 52 is a comprehensive curtain wall system that combines technology and design with the demands of contemporary building design and construction.
More informationConfort 160. Sliding Systems. Sapa Building System
Confort 160 Sliding Systems Sapa Building System Confort 160 is a high performance thermally insulated sliding window system, with a user-friendly slide action. The system, which has an attractive aesthetic
More informationWindow Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
More informationCDW Systems Ltd Contemporary Doors & Windows
CDW Systems Ltd Contemporary Doors & Windows The comprehensive product overview A complete specification guide to CDW Systems range of Aluminium windows, doors and curtain walling for commercial and residential
More informationConfort 26. Sliding Systems. Sapa Building System
Confort 26 Sliding Systems Sapa Building System Confort 26 is Sapa s thermally insulated sliding system for windows and doors. Available as two- and three-rail solution. Among its features, there are
More informationAvantis 75. Windows & Doors. Sapa Building System
Avantis 75 Windows & Doors Sapa Building System Avantis 75 is a thermally broken three-chamber window and door system, which sets the highest standards of thermal insulation and stability. Avantis 75
More informationPlaisance 24. Sliding Systems. Sapa Building System
Plaisance 24 Sliding Systems Sapa Building System Plaisance 24 is Sapa s noninsulated sliding system for windows and doors. Available as one-, two-, three- and fourrail solution. Among its features, there
More informationClad Direct Glaze Window Installation Instructions
Clad Direct Glaze Window Installation Instructions Sill flashing and sealing: 2. An overview of the proper flashing sequence is shown in figure 1. Please read entire installation instructions carefully
More informationInstallation Instructions
Installation Instructions One-Piece Deep Wall Sleeve For Use with Packaged Terminal Units Please read these instructions completely before attempting installation. NOTE: Ensure that the unit is only installed
More informationMarch 14, 2007. Installation of Bay, Bow and Garden Windows
March 14, 2007 Re: Installation of Bay, Bow and Garden Windows Attached are the Atrium Companies, Inc recommendation for the installation of bay, bow and garden windows. These instructions were developed
More informationProduct information. Schüco Window AWS 65. 03.2009/Web Schüco AWS 65 1-11
Schüco Window AWS 65 The basic window system, Schüco Window AWS 65, with a comprehensive range for imaginative designs, is particularly suitable for block constructions with a basic depth of 65 mm. Features
More informationEvidence of Performance Resistance to wind load Watertightness Air permeability
Evidence of Performance Resistance to wind load Watertightness Air permeability Test Report 102 43093/1e Client Product YILDIZPEN PLASTIK SAN. VE TIC. LTD. STI. A.O.S.B 10039 Street No:18 Çigli Izmir Turkey
More informationINSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
More informationArchitect: Manuelle Gautrand Photography: Vincent Fillon GEODE CREATIVE CURTAIN WALL
Architect: Manuelle Gautrand Photography: Vincent Fillon GEODE CREATIVE CURTAIN WALL Photography: Wenzel GEODE, a comprehensive range of curtain walling When aesthetics meet functionality The GEODE system
More informationGlass partitions SFB 3074
Glass partitions SFB 3074 Our facade system SFB 3074 is innovative in its design. We have made a great effort to obtain an energy effective system. The future requirements regarding the economical use
More informationAll the above mentioned technical characteristics of the MU 2500 Thermal system indemnify its air and water tightness.
MU INTRODUCTION MU 2500 Thermal,.,,,,. The MU 2500 Thermal system can be used for doors and windows in domestic and commercial applications such as houses, villas, big complexes of flats and offices.
More informationUnbeatable energy efficient glass curtain wall system
Unbeatable energy efficient glass curtain wall system CONTENT Introduction 1 System 2 World Class Engineering 4 Unit Selection 5 Energy Efficiency & Comfort 10 Maximised Installation Efficiency 12 Aesthetics
More informationInstallation Window Building In Details
Installation Window Building In Details INSTALLATION Photo courtesy of Rowe Aluminium DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 INSTALLATION Installation Replaces: Scale: NOT TO SCALE Vantage snap-on couplers
More informationWe urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.
Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationRooflight INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Rooflight These instructions should be used for: Installing Permanent Trickle Ventilation: Constructing & Waterproofing a Timber Upstand Curb: Installing & Waterproofing Proprietary
More informationCasement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More informationIntroduction...COMB-2 Design Considerations and Examples...COMB-3
SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant
More informationWINDOW INSTALLATION GUIDE FOR NEW CONSTRUCTION - WOOD FRAMING
WINDOW INSTALLATION GUIDE FOR NEW CONSTRUCTION - WOOD FRAMING IMPORTANT NOTICES AND INFORMATION Read these instructions in their entirety prior to installing windows. Any local building code requirements
More informationInstallation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
More informationWATER LEAKAGE IN GLAZED CURTAIN WALL SYSTEMS:
WATER LEAKAGE IN GLAZED CURTAIN WALL SYSTEMS: BY WILLIAM D. SMITH Figure 1 Four Corporate Center, Franklin, TN. Architect: Little & Associates,Charlotte, NC. Gen. Contractor: Ray Bell Const. Co., Nashville,
More informationDow Corning PROPRIETARY. Dow Corning. A Thermal Modelling Comparison of Typical Curtain Wall Systems
Dow Corning A Thermal Modelling Comparison of Typical Curtain Wall Systems Introduction Today s Aim To understand the meaning of a U value and window energy ratings Discuss the drivers for energy efficiency
More informationEvidence of Performance. Class 2. Class 5A. Class C4 / B4. Test Report No. 15-003655-PR01. ift Rosenheim 16.12.2015
Evidence of Performance Test Report No. 15-003655-PR01 (PB-A01-02-en-01) Client Product Designation Performance-relevant product details Overall dimensions (W x H) Special features Alüminyum San. Tic.
More informationVolkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
More informationHow To Test For An Architectural Test
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Rendered to: CORAL ARCHITECTURAL PRODUCTS SERIES/MODEL: PW 256 with Door Openings PRODUCT TYPE: Aluminum Impact Resistant Curtain Wall System
More informationInstallation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
More informationCurved Quadrant Instruction Manual
Curved Quadrant Instruction Manual Consumer Guarantee - Please make sure the purchaser/end user completes and returns the Guarantee card which is enclosed with this product. Failure to validate the Guarantee
More informationImportant Information for Installer & Homeowner
Important Information for Installer & Homeowner Homeowner: Please keep this information for your records, do not discard! Installation Instructions for Wood Frame Construction Replacement (See other side
More informationInstallation Instructions
Installation Instructions READ BEFORE INSTALLING UNIT For Low Profile Window Air Conditioner INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Follow each step
More informationsliding window & mono-rail Sliding window upvc window profile systems Auf der Breit 2 DE - 76227 Karlsruhe
KunststoffFenstersysteme aluplast Gmb (ead Office) upv window profile systems Auf der reit DE 77 Karlsruhe fon: +9 71 717 fax: +9 71 7171999 info.de@aluplast.net www.aluplast.net aluplast India Pvt. Ltd.
More informationFire Resistant Systems
Fire Resistant Systems A R C H I T E C T U R A L A L U M I N I U M G L A Z I N G S Y S T E M S Fire Resistant Systems Introduction Kawneer are pleased to introduce two new comprehensive Fire Resistant
More informationInstallation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows
Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows americancraftsmanwindows.com Project Requirements: Read
More informationInstallation Guide for Andersen Architectural Wood Inswing Entry Doors
Installation Guide for Andersen Architectural Wood Inswing Entry Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are
More informationSECTION 08560 SERIES 1500 VINYL PATIO DOORS
SERIES 1500 VINYL PATIO DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Patio Doors 1.2 RELATED SECTIONS A. Section 05450: Cold Formed Metal Framing. B. Section 06100: Rough Carpentry. C. Section 06200: Finish
More informationFLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL
FLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL Table of Contents Introduction... 2 Components... 3 Step 1 Marking out the Perimeter of the Carport... 3 Step 2a Footing Set-Out for Concrete Block Pad
More informationmajestic install ation guide barcelona three sided enclosure 24mm surface mounted wall channels and underframe to base
majestic install ation guide barcelona three sided enclosure 24mm surface mounted wall channels and underframe to base These Instructions are for a left and right handed unit. The diagrams show a left
More informationPackaged Terminal Air Conditioner Wall Sleeve Installation
Installation & Maintenance Data IM 1196 Group: PTAC Part Number: 910141799 Date: October 2013 Packaged Terminal Air Conditioner Installation x 42" PGAN with Top-Mounted Hydronic Heat Note: Installation
More informationSERVICE INSTRUCTIONS 3107688.016 AUXILIARY DRAIN PAN KIT MODEL 3107688.016
USA SERVICE OFFICE Dometic, LLC 2320 Industrial Parkway Elkhart, IN 46516 574-294-2511 CANADA Dometic, LLC 46 Zatonski, Unit 3 Brantford, ON N3T 5L8 CANADA 519-720-9578 3107688.016 AUXILIARY DRAIN PAN
More information7. Installation. installation 7.1.1. CAST-IN WINDOW SYSTEM 7.1. INSTALLATION OF WINDOW MAIN FRAME
7. Installation Window involves the fixing of window frame at an earlier construction stage and subsequent of the window sashes. This is a highly workmanship dependent process. Only trained and approved
More informationIMPORTANT INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER SEALANT REQUIRED TO COMPLETE THIS INSTALLATION: (Not supplied) Sika Sikasil NG (Arctic White) To seal the WHITE shower door and returns to the shower tray.
More informationInstallation Guide for Andersen Architectural Clad Outswing Commercial Doors
Installation Guide for Andersen Architectural Clad Outswing Commercial Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance
More informationPERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
Architectural Testing PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Mahogany Entry Door PRODUCT TYPE: 6' x 8' Double Outswing Hardwood TDL Door with Half Circle TDL Transom
More informationSERIES 238 WINDOWS. NOTE: Read instructions completely before attempting any installation.
1 Installation Instructions SERIES 238 WINDOWS Page 2: Page 3-4: Page 5: Page 6: Page 7: Opening Preparation and Wood Buck Installation Installation Instructions for Series 238 WINDOWS Figure 1: Buck preparation
More informationVITOSOL r 200-T SP2A. VITOSOL 200-T Type SP2A
Technical Data Manual Model Nos. and pricing: see Price List Vacuum tube collector based on the heat pipe principle For the utilisation of solar energy VITOSOL r 200-T SP2A Product may not be exactly as
More informationSeries 602 MAGNUM Sliding Window DESIGNER SERIES
Series 602 DESIGNER SERIES DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 DESIGNER SERIES Series 602 KEY EATURES / PERORMANCE CHARACTERISTICS Scale: NOT TO SCALE Designed to complement our existing high quality
More informationAn introduction to selling blinds
An introduction to selling blinds We are a small family owned independent blind manufacturer. We have been manufacturing blinds for trade and contract customers since 1991, from our factory in Hevingham
More information!!!!!! !!! Decra Plus DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 DPSW016 DPSW020 DPSW021 DPSW024 DPSW030 DPSW031 DPSW035 DPSW030 DPSW031 DPSW035
Decra Plus Drawing no DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 Description Shown In Decra Brochure Most Commonly Used Detail t~êã=oççñ=b~îéë=aéí~áä=b~îéë=lîéêü~åö=táíü=fåëìä~íéç=c~ëåá~=~åç=pçññáí
More information6mm Two Door Offset Quadrant
Installation Guide 6mm Two Door Offset Quadrant 226MBJ 0914RN Offset Quadrant 226MBJ.indd 1 07/08/2015 14:03 Cu w Before you Start Please read this Installation Guide fully. Although these instructions
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationHanson Building Products. precast basement solutions
Hanson Building Products precast basement solutions Hanson Building Products Basement Systems Add an extra dimension and combine the inherent flexible, structural and waterproof properties of concrete
More informationfoot skylight) is enough to knock a worker off their feet. A 10 mph wind gust on a 5 x 6 skylight develops a wind force of 270 lbs.
Skylight Installation Instructions This document provides instruction and guidelines for installation of both curb mount (CM) and self flashing (SF) unit skylights on flat, pitched (> or equal to 3/12
More informationMIAMI-DADE COUNTY PERFORMANCE TEST REPORT. Report No.: B8049.01-401-18. Rendered to: AMERICAN PRODUCTS, INC Tampa, Florida
Architectural Testing MIAMI-DADE COUNTY PERFORMANCE TEST REPORT Report No.: B8049.01-401-18 Rendered to: AMERICAN PRODUCTS, INC Tampa, Florida PRODUCT TYPE: Aluminum Storefront with Double Doors SERIES/MODEL:
More informationWINDOW REPAIR MANUAL & REFERENCE GUIDE
WINDOW REPAIR MANUAL & REFERENCE GUIDE TABLE OF CONTENTS DOUBLE HUNG & SINGLE HUNG PARTS 4-5 CASEMENT PARTS 6 SCREEN PARTS 7-8 HOW TO REMOVE TILT-IN SASH 9 HOW TO REMOVE A BALANCE 10 HOW TO INSTALL BALANCE
More informationTechnical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
More informationINSTALLATION INSTRUCTIONS
door frames Engineered product systems INSTALLATION INSTRUCTIONS door frames MINIMALIST DOOR FRAME Fry Reglet Flush Door frames are designed for use with 3 5/8 studs with ½ drywall both sides (4 5/8 throat
More information-66 / AVRA .. / ETEM S.A.
.. / ETEM S.A. H ETEM икивиж ижимб ивикив иживиои ивимижик иоик ив. б ижиж, ивикивиоиж, иживикимиж и ивиж иоиж иоб икив иоиоимивив ивимижик ижив и ивижи и, ивимивижи и и ивиж ижимб ивикижи и б и. ив и
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More informationJANUARY, 2016 TR-7100 Windows (Fixed) 1 EC 97909-071 085113 ALUMINUM WINDOWS Guide Specs
JANUARY, 2016 TR-7100 Windows (Fixed) 1 EC 97909-071 085113 ALUMINUM WINDOWS Guide Specs SECTION 085113 ALUMINUM WINDOWS This suggested guide specification has been developed using the current edition
More informationFTC 2015-2016 DIY Mountain Build Guide
FTC 2015-2016 DIY Mountain Build Guide Assembly Instructions Check out the DIY2015-2016 Prints and BoM for individual part details. Release 1.0 9/10/15 Page 1 This guide and Bill of Materials are for constructing
More informationISSUE 2. Installation Guide
ISSUE 2 Installation Guide Here at Slide and Fold, we LOVE our Bi-Fold Plus range of folding-sliding doors. We want to ensure that your customers love them too. So we have created a new, detailed installation
More information0845 0098 980 www.nicholsonsts.com
0845 0098 980 www.nicholsonsts.com ROOFTRAK The IFP is revolutionising the way we fix things to roofs. Technical Director of a leading UK roofing system manufacturer The ROOFTRAK-IFP A revolutionary solution
More informationWe urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.
Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More informationChapter 3 Pre-Installation, Foundations and Piers
Chapter 3 Pre-Installation, Foundations and Piers 3-1 Pre-Installation Establishes the minimum requirements for the siting, design, materials, access, and installation of manufactured dwellings, accessory
More informationBOQ SPECIFICATIONS. The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping.
BOQ SPECIFICATIONS VERTICAL BLINDS Vertical Blinds made of glass fibre fabrics in width 5 (or 4 ). Minimum overlapping of ¾ in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationVertical Slider. Technical Manual. Issue E September 2006 Part No. 994610
Vertical Slider Technical Manual Issue E September 006 Part No. 994610 Issue E Ammendments Page No. Ammendment. 700618 & 700619 fringe seals added.. 133500 & 137500 bottom seals replaced with 13350 & 13750..
More informationGarden Windows Builders Vinyl
TABLE OF CONTENTS Specifications... 8-2 QuickSpecGuide... 8-3 Elevations/Sizes: 1/4 Scale GardenUnits... 8-4 Grille Patterns... 8-5 SectionDetails: 6 Scale... 8-6 December 2008 JELD-WEN reserves the right
More informationFLAT ROOF BOX SPAN CARPORTS
AGS/NC/03 FLAT ROOF BOX SPAN CARPORTS Thank you for choosing this quality product. We strongly recommend that you read these instructions thoroughly. Please take your time and do not rush the erection
More informationElectroShade Skylight, Atrium and Monumental Shades
ElectroShade Skylight, Atrium and Monumental Shades Flat Horizontal Double Motor Soft Fold Top Down Gravity Drop Flat Triangular Double Motor Bottom Up Flat Top Down Gravity Drop Soft Fold Single Motor
More informationAstragal: a vertical member placed at the meeting edges of a double door to provide a weather seal and may be used to anchor the fixed door.
Window and Door Dictionary AAMA: American Architectural Manufacturers Association. A national trade association that establishes voluntary standards for the window, door, and skylight industry. Ambient
More informationFlue Options. Ace Finest Finest Gold Best 30/40/50/60 Best 80. Flue Options Flue Options Flue Options Flue Options
Flue Options Ace Finest Finest Gold Best 30/40/50/60 Best 80 Flue Options Flue Options Flue Options Flue Options B r i t i s h M a d e B o i l e r s Halstead have been manufacturing boilers in the UK since
More informationSapa Building System, first time at BAU
1/9 Sapa Building System, first time at BAU Sapa Building System will exhibit at the BAU fair Munich on January 14-19 2013 for the first time. Sapa Building System is pleased to be associated with the
More informationIntegral Kit Instructions
Integral Kit Instructions For Fisher & Paykel Cabinet widths of 525, 635, 680, 790 mm wide For curved door Models Series B, C, D & G Manual 814980 Updated August 2008 IMPORTANT If your refrigerator has
More informationPERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Buffalo Forge Steel Doors / Round Top Single PRODUCT TYPE: In-swing Round Top Single Door RH-4 Title Uniform Load Deflection Test
More informationAndersen Electric Window Opener for Andersen Awning and Roof Windows
W A Electric Window Opener Electric Window Opener for Awning and Roof Windows Congratulations! You have just purchased one of the many fine products. For ease of installation and continued enjoyment of
More informationK. D. FRAME ASSEMBLY FOR CLOSED STEEL STUD WALLS...Ins 10. FRAME INSTALLATION DETAILS FOR CLOSED STEEL STUD WALLS...Ins 11
K. D. FRAME ASSEMBLY FOR MASONRY WALLS...........................Ins 2 FRAME INSTALLATION DETAILS FOR MASONRY WALLS......................Ins 3 INSTALLING EXISTING MASONRY WALL ANCHORS IN FRAME..................Ins
More informationSun Windows General Information Sun New Construction Window Installation Instructions
Sun Windows General Information Section 1 G F H H H A. Apply Weather Resistive Barrier B. Apply Sill Flashing Tape C. Place Waterproof Sill Shims D. Caulk Back of Nail Fin Sides & Top, Set Window, Fasten
More informationAnnex to Accreditation Certificate D ZE 11349 01 00 according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to Accreditation Certificate D ZE 349 0 00 according to DIN EN ISO/IEC 7065:203 Period of validity: 30.06.205 to 09.05.209 Date of issue:: 30.06.205 Holder of
More informationSECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
More informationCity of San Diego, CWP Guidelines
PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,
More informationQ-Lon foam weatherseal: for PVC, timber and aluminium applications THE WORLDS BEST WEATHERSEAL
Q-Lon foam weatherseal: for PVC, timber and aluminium applications THE WORLDS BEST WEATHERSEAL CONTENTS About Schlegel 3 Q-Lon Profiles PVC doors, windows and roller shutters 6 Timber doors and windows
More informationInstallation Guide. Bath and Wall Surrounds SERIES 7104 1021861-2-B
Installation Guide and Wall Surrounds SERIES 7104 1021861-2-B Thank You For Choosing Sterling We appreciate your commitment to Sterling value. Please take a few minutes to review this manual before you
More informationSample Calculations...V-CR-12. Door and Window Typical Combinations... V-CR-12 Horizontal and Vertical Typical Combinations...
SECTION DIRECTORY General Information Definitions...V-CR- Design Considerations...V-CR- Composite Configurations...V-CR-4 Design Considerations and Examples for Typical Window and Door Combinations...V-CR-5
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationInformation Technology Solutions
Information Technology Solutions Aluminum Sliding Door Assembly Instructions Shield Doors & Windows Bi-fold Door Assembly Instructions For Support Please Call 03 8339 2252 Aluminum Sliding Door Assembly
More informationGarden Window. Montecito Series Vinyl Garden Window Architectural Manual
Montecito Series Vinyl The offers the outstanding insulating properties, low maintenance, and contemporary aesthetic appeal only vinyl can provide. Available in White and Tan homogenous window frames,
More informationKnürr Miracel. Knürr Miracel. 19 Network and Server Rack Platform 1.12 to 1.22 1.11
Knürr Miracel 19 Network and Server Rack Platform 1.12 to 1.22 1.11 19" Server Rack: Knürr Miracel Strong points 1.13 Knürr Miracel ASP ASP/Server Rack 1.16 Knürr Miracel Server Rack 1.18 Knürr Miracel
More informationΑΡΧΙΤΕΚΤΟΝΙΚΑ ΣΥΣΤΗΜΑΤΑ ΑΛΟΥΜΙΝΙΟΥ ARCHITECTURAL ALUMINIUM SYSTEMS
ΑΡΧΙΤΕΚΤΟΝΙΚΑ ΣΥΣΤΗΜΑΤΑ ΑΛΟΥΜΙΝΙΟΥ ARCHITECTURAL ALUMINIUM SYSTEMS NORMAL SLIDING and SLIDING WITH THERMAL BREAK A L U M IN IU M S Y S T E M S 32 SERIES 32 SLIDING. : 9045 815 gr/m 475 mm -25-25 - FOR
More information