Annex to Accreditation Certificate D ZE according to DIN EN ISO/IEC 17065:2013

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to Accreditation Certificate D ZE according to DIN EN ISO/IEC 7065:203 Period of validity: to Date of issue:: Holder of certificate: ift Rosenheim GmbH Zertifizierungs und Überwachungsstelle ift Q Zert Theodor Gietl Straße 7 9; Rosenheim Certifications of products in the fields: Certifications of products and services outside of the regulated sector for certification requirements on the basis of s and/or normative provisions for construction products (such as windows, doors, gates, curtain walling, shutters, glass, glass products), accessories (such as panels, profiles, connector, coatings, adhesives, sealants, building hardware, hinges, locks), assembly / assembly products (such as in situ foam, sealing tapes), services (such as assembly, calculation, sustainability) Certification of construction products within the conformity procedure according to Building Regulation List and construction products with General Type Approval according to part II a of the directory for testing, surveillance/inspection and certification bodies according to State Building Code (e.g. construction products for the fire safety (reaction to fire, resistance to fire), products for resistance to fire and smoke control, safety glazing) Certification of construction products in accordance with Construction Products Regulation (EU) No. 305/20 to defined harmonized conditions for the marketing of construction products (CPR) for systems of assessment and verification of constancy of performance (systems /+) and of the factory production control (FPC) (system 2+) *) Within the entire scope of accreditation, the certification body is permitted, without being required to inform and obtain prior approval from DAkkS, to apply the Certification Scheme to new products and product requirements within the product groups indicated. In this context, the product requirements are based on s and/or normative documents/ specifications. The certification requirements/ s/ normative documents/ specifications listed in Clause of the Annex are exemplary. This document is a translation. The definitive version is the original German annex to the accreditation certificate. /3

2 Annex to the Accreditation Certificate D ZE Certifications of products and services outside of the regulated sector for certification requirements on the basis of s and/or normative provisions * Certification system ift certified for the product group of the building envelope: Construction products such as windows, doors, gates, curtain walling, shutters, glass products as well as their Accessories/constituent parts such as panels, profiles, connectors, coatings, adhesives, sealants, building hardware, hinges, locks, assembly products and the related services such as assembly, calculation and sustainability. QM General conditions for the Certification and Surveillance/Inspection of products and services Certification requirements: QM QM QM QM QM QM QM QM QM Certification requirements for burglar resistant components (pedestrian doorsets, windows, curtain walling, grilles and shutters) according to DIN EN 627, DIN V ENV 627, DIN 806 Certification requirements for smoke control doors and shutters according to DIN 8095, DIN EN Certification requirements for industrial and commercial doors and gates according to EN 324 Certification requirements for windows and external pedestrian doors according to EN 435 Certification requirements for internal pedestrian doors according to pren Certification requirements for curtain walling according to EN 3830 Certification requirements for powered pedestrian doors according to DIN 8650 Certification requirements for thermal and solar protection of coated glass products according to DIN EN 096 and UEAtc Guideline Certification requirements for insulating glass units according to EN Period of validity: to Translation 2/3 Date of issue:

3 Annex to the Accreditation Certificate D ZE QM QM QM Certification requirements for shower enclosures according to EN 4428 Certification requirements for laminated glass and laminated safety glass (VSG) according to EN 4449 Certification requirements for thermally toughened soda lime silicate safety glass (ESG) according to EN QM QM QM QM QM QM QM QM QM QM QM QM Certification requirements for heat soaked thermally toughened soda lime silicate safety glass (ESG H) according to EN Certification requirements for heat strengthened soda lime silicate glass (TVG) according to EN Certification requirements for panels for external pedestrian doors Certification requirements for Solid, finger jointed and laminated profiles for wood windows according to ift Guideline HO 0/ Certification requirements for additional burglar resistant products according to DIN Certification requirements for security glazing and security panels Certification requirements for sealing of glazings with sealants according to EN , DIN EN ISO 600 Certification requirements for metal profiles with thermal barrier according to EN 4024 Fire doors and shutters VKF Certification requirements for glazing blocks made of plastics according to ift Guideline VE 05/0 Certification requirements for external shutters Certification requirements for weldable corner connector according to ift Test Guidelines Period of validity: to Translation 3/3 Date of issue:

4 Annex to the Accreditation Certificate D ZE QM QM QM QM QM QM QM QM QM QM QM QM QM QM Certification requirements for gaskets and weatherstripping according to EN 2365 for replacement of building components according to EN 435 Certification requirements for drainage systems and/or thresholds and/or metal ceilings for replacement of building components according to EN 435 Certification requirements for corner connections for wood windows Certification requirements for locks according to EN 2209 / DIN 825 /2 and/or pren 5685 / DIN for replacement of building components according to EN 435 Certification requirements for blank external doors for replacement of building components according to EN 435 Certification requirements for hinges according to EN 935 for replacement of building components according to EN 435 Tilt&Turn, Tilt First and Turn Only hardware in accordance with EN for replacement of building components according to EN 435 Sliding folding hardware in accordance with EN for replacement of building components according to EN 435 Lifting sliding hardware in accordance with EN for replacement of building components according to EN 435 Parallel sliding tilting hardware according to EN for replacement of building components according to EN 435 Certification requirements for bonding of SSG systems according to ETAG 002 Certification requirements for protective hardware according to EN 906 and DIN 8257 Certification requirements for burglar resistant products for port installation according to DIN 804 Certification requirements for sealing tapes made of cellular plastics for the assembly of building components according to DIN 8542 Period of validity: to Translation 4/3 Date of issue:

5 Annex to the Accreditation Certificate D ZE QM QM QM QM QM Certification requirements for polyurethane in situ foam for the fixing of door frames of internal pedestrian doors made of timber and timber materials Certification requirements for the assembly of windows, external pedestrian doors and curtain walling Certification requirements for ift certified specialised company for mechanical security devices Certification requirements for ift certified specialised company for the calculation of thermal transmittance Certification requirements for sustainability according to DIN ISO 4025 and EN Certifications according to State Building Code, Germany (according to notice of DIBt, Berlin) Certifications for construction products within the conformity procedure according to Building Regulation List (BRL) BRL A, Part, No.6.3 Mineral fiberboard as infill for fire resistant doors BRL A, Part, No.6.8 BRL A, Part, No.6.6 BRL A, Part, No.6.7 BRL A, Part, No..3 BRL A, Part 2, No Approval Group 9/ Approval Group 9/2 Approval Group 2/2 Locks mortise locks for fire resistant and smoke control doors Spring hinge and construction hinge for fire resistant and smoke control doors Lever handle sets for fire resistant and smoke control doors Heat soaked thermally toughened soda lime silicate safety glass Building materials with requirements only for reaction to fire Structural Glazing according to the "Guideline for the evidence of conformity for Structural Glazing" / QM30 (200 0) Mechanically fixed structural glazing (e.g. laminated glass with cast in place resin heat strengthened soda lime glass) Fire doors and shutters Period of validity: to Translation 5/3 Date of issue:

6 Annex to the Accreditation Certificate D ZE Approval Group 2/5 Approval Group 2/7 Approval Group 2/8 Approval Group 2/9 Approval Group 22/3 Approval Group 22/4 Approval Group 22/9 Approval Group 22/0 Approval Group 23/ Approval Group 2/ Fire resistant assemblies Fire resistant closures of access opening Openable fabric curtain Fire doors and shutters (outdoor use) G/F fire resistant glazing Penetration seals (pipe, cable) (Z 9.5 ) Movable, self closing fire resistant glazing Accessories for movable, self closing fire resistant glazing Non combustible or hardly inflammable building materials (DIN 402 ) Accessories (non regulated) for fire doors and shutters excluding single axis hinges Period of validity: to Translation 6/3 Date of issue:

7 Annex to the Accreditation Certificate D ZE Certification of construction products in accordance with Construction Products Regulation (EU) No. 305/20 to defined harmonised conditions for the marketing of construction products (CPR) for systems of assessment and verification of constancy of performance (systems /+) and of the factory production control (FPC) (system 2+) Commission Decision System ) Technical Specification 996/577/EG 2002/592/EG Fire alarm/detection, fixed fire fighting, fire and smoke control and explosion suppression products 996/580/EG Curtain walling 996/582/EG Structural sealant glazing systems and metal anchors for concrete (mechanical fasteners) 997/462/EG Wood based panels, (2+) EN 20 :2005/A:2006 Smoke and heat control systems Part : Specification for smoke barriers EN 20 2:2003 Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators pren 20 9:2004 Smoke and heat control systems Part 9: Control panels EN 20 0:2005/AC:2007 Smoke and heat control systems Part 0: Power supplies EN 3830:2003 Curtain walling Product ETAG 002 :998 APPROVAL FOR Structural Sealant Glazing Kits (SSGK) Part : Supported and Unsupported Systems ETAG 002 2:2002 APPROVAL FOR Structural Sealant Glazing Kits (SSGK) Part 2: Coated Aluminium Systems ETAG 002 3:2003 APPROVAL FOR Structural Sealant Glazing Kits (SSGK) Part 3: Systems Incorporating Profiles with a Thermal Barrier EN 3986:2004 Wood based panels for use in construction Characteristics, evaluation of conformity and marking Period of validity: to Translation 7/3 Date of issue:

8 Annex to the Accreditation Certificate D ZE Commission Decision System ) Technical Specification 998/23/EG Internal partition kits ETAG 003:998 APPROVAL FOR Internal partition kits for use as nonloadbearing walls 998/436/EC Roof coverings, rooflights, roof windows and ancillary products 998/437/EC Internal and external wall and ceiling finishes 998/600/EC Self supporting translucent roof kits ( except glass based kits) 999/90/EC Membranes (2/3): water vapour control layers 999/9/EC Thermal insulating products EN 873:2005 Prefabricated accessories for roofing Individual roof lights of plastics Product specification and test methods EN 4963:2006 Roof coverings Continuous rooflights of plastics with or without upstands Classification, requirements and test methods EN 502:2007+A:20 Decorative wallcoverings Roll and panel form products ETAG 00:2002 APPROVAL FOR Self supporting Translucent Roof Kits EN 3984:2004+A:2006 Flexible sheets for waterproofing Plastic and rubber vapour control layers Definitions and characteristics EN 362:202 made mineral wool (MW) products Specification EN 363:202 made products of expanded polystyrene (EPS) Specification EN 364:202 made products of extruded polystyrene foam (XPS) Specification Period of validity: to Translation 8/3 Date of issue:

9 Annex to the Accreditation Certificate D ZE Commission Decision System ) Technical Specification EN 365:202 made rigid polyurethane foam (PUR) products Specification EN 366:202 made products of phenolic foam (PF) Specification 999/9/EC Thermal insulating products EN 367:202 made cellular glass (CG) products Specification EN 368:202 made wood wool (WW) products Specification EN 369:202 made products of expanded perlite (EPB) Specification EN 37:202 made wood fibre (WF) products Specification 999/93/EC Doors, windows, shutters, blinds, gates and related building hardware EN 435 :2006+A:200 Windows and doors Product, performance characteristics Part : Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics pren 435 2:2009 Windows and doors Product, performance characteristics Part 2: Internal pedestrian doorsets without resistance to fire and /or smoke leakage characteristics EN 79:2008 Building hardware Emergency exit devices operated by a lever handle or push pad Requirements and test methods Period of validity: to Translation 9/3 Date of issue:

10 Annex to the Accreditation Certificate D ZE Commission Decision System ) Technical Specification EN 25:2008 Building hardware Panic exit devices operated by a horizontal bar, for use on escape routes Requirements and test methods EN 935:2002/AC2003 Building hardware Single axis hinges Requirements and test methods 999/93/EC Doors, windows, shutters, blinds, gates and related building hardware 999/455/EC Timber frame and log prefabricated building kits for use in construction works EN 2209:2003/AC:2005 Building hardware Locks and latches Mechanically operated locks, latches and locking plates Requirements and test methods EN 54:996 / A:2002 / AC:2006 Building hardware Controlled door closing devices Requirements and test methods EN 4846: 20 Building hardware Locks and latches Electromechanically operated locks and striking plates Requirements and test methods EAD Multi axis concealed hinge assemblies EN 636:203 Power operated pedestrian doors Product, performance characteristics Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics EN 6034:204² ) Pedestrian doorsets, industrial, commercial, garage doors and windows Product, performance characteristics Fire resistance and/or smoke control characteristics ETAG 007:200 APPROVAL FOR Timber Frame Building Kits Period of validity: to Translation 0/3 Date of issue:

11 Annex to the Accreditation Certificate D ZE Commission Decision System ) Technical Specification 2000/245/EC Flat glass, profiled glass and glass block products EN 572 9:2004 Glass in building Basic soda lime silicate glass products Part 9: Evaluation of conformity/product EN 096 4:2004 Glass in building Coated glass Part 4: Evaluation of conformity/product EN 279 5:2005+A2:200 Glass in building Insulating glass units Part 5: Evaluation of conformity EN 748 2:2004 Glass in building Special basic products Part 2: Borosilicate glasses; Evaluation of conformity/product EN :2004 Glass in building Special basic products Glass ceramics Part 2 2: Evaluation of conformity/product EN 863 2:2004 Glass in building Heat strengthened soda lime silicate glass Part 2: Evaluation of conformity/product EN 250 2:2004 Glass in building Thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/product EN :2004 Glass in building Chemically strengthened soda lime silicate glass Part 2: Evaluation of conformity/product EN :2004 Glass in building Thermally toughened borosilicate safety glass Part 2: Evaluation of conformity/product EN 478 2:2004 Glass in building Basic alkaline earth silicate glass products Part 2: Evaluation of conformity/product Period of validity: to Translation /3 Date of issue:

12 Annex to the Accreditation Certificate D ZE Commission Decision System ) Technical Specification 2000/245/EC Flat glass, profiled glass and glass block products 2000/447/EC Prefabricated wood based load bearing stressed skin panels and self supporting composite lightweight panels EN 479 2:2005 Glass in building Heat soaked thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/product EN 432 2:2005 Glass in building Thermally toughened alkaline earth silicate safety glass Part 2: Evaluation of conformity/product EN 4449:2005/AC:2005 Glass in building Laminated glass and laminated safety glass Evaluation of conformity/product ETAG 06 :2003 APPROVAL of Self supporting Composite Lightweight Panels Part : General ETAG 06 2:2003 APPROVAL of Self supporting Composite Lightweight Panels Part 2: Specific Aspects relating to Selfsupporting Composite Lightweight Panels for Use in Roofs ETAG 06 3:2005 APPROVAL of Self supporting Composite Lightweight Panels Part 3: Specific Aspects relating to Selfsupporting Composite Lightweight Panels for Use in External Walls and Claddings ETAG 06 4:2004 APPROVAL of Self supporting Composite Lightweight Panels Part 4: Specific Aspects relating to Selfsupporting Composite Lightweight Panels for Use in Internal Walls and Ceilings ETAG 09 APPROVAL for Prefabricated Wood based Loadbearing Stressed Skin Panels Period of validity: to Translation 2/3 Date of issue:

13 Annex to the Accreditation Certificate D ZE Commission Decision System ) Technical Specification 20/9/EC Sealants for non structural use in joints in buildings and pedestrian walkways EN 565 :202 Sealants for non structural use in joints in buildings and pedestrian walkways Part : Sealants for facade elements EN 565 2:202 Sealants for non structural use in joints in buildings and pedestrian walkways Part 2: Sealants for glazing EN 565 3:202 Sealants for non structural use in joints in buildings and pedestrian walkways Part 3: Sealants for sanitary joints EN 565 4:202 Sealants for non structural use in joints in buildings and pedestrian walkways Part 4: Sealants for pedestrian walkways ETA Request No.06.05/0 Sealing kits, profiles and strips usually made of foamed polyurethane, plastic impregnated bitumen, or butyl ) 2) System of assessment and verification of constancy of performance Harmonisation is under way The requirements of certification body for products and certification body for Factory Production Control in accordance with Article 43 of the Construction Products Regulation are fulfilled according to Annex V of the Construction Products Regulation. Tasks which are necessary for the certification and which are not performed by the accreditation certificate holder, are indicated on the list of subcontractors. Abbreviations used: DIN EN ETA ETAG ISO QM XXX PÜZ Stelle Deutsches Institut für Normung e. V. (German Standardisation Organisation) European Standard European Technical Approval European Technical Approval Guideline (used as EAD) International Standardization Organization Certification requirements of ift Q Zert Prüf, Überwachungs und Zertifizierungsstelle nach Landesbauordnung, Deutschland (Testing, surveillance/inspection and certification body according to Building State Code, Germany) Period of validity: to Translation 3/3 Date of issue: