Polyethylene Bottles 2014 to 2018
|
|
- Deborah Richardson
- 7 years ago
- Views:
Transcription
1 Polyethylene Bottles 2014 to 2018 Section I: Section II: Introduction A. Study purpose B. Key definitions 1. PE bottles 2. Geography C. Study organization D. Geographic regions E. Study methodology F. Conventions Executive Summary A. Market analysis drivers and trends 1. Demand determinants 2. Macroeconomic environment 3. Environmental 4. Competing packages 5. Economic 6. Manufacturing location B. Market analysis statistics and projections 1. PE bottle volume segmented by end-use category 2. PE bottle value segmented by end-use category 3. PE bottle volume segmented by geographic region 4. PE bottle volume segmented by barrier vs. non-barrier 5. PE bottle volume segmented by renewable content C. Technology 1. Weight reduction 2. Renewable raw materials 3. Recycling 4. Process development D. Economic and environmental impact 1. Economic results 2. Environmental results Copyright by Allied Development Corp. Polyethylene Bottles Table of Contents - 1
2 Section III: Section IV: Technology A. PE bottle design 1. Raw materials 2. Bottle weight reduction 3. Structures 4. Shape 5. PE bottle producers B. Bottle manufacture C. Continuous extrusion blow molding 1. Continuous extrusion blow molding shuttle process 2. Continuous extrusion blow molding wheel process D. Intermittent extrusion blow molding 1. Intermittent extrusion blow molding reciprocating screw 2. Intermittent extrusion blow molding accumulator head E. Injection blow molding (IBM) 1. Injection blow molding process 2. Molds F. Injection stretch blow molding (ISBM) 1. Preform 2. Blow molding G. Compression blow forming (CBF) H. Jar molding I. Equipment suppliers J. Treatment process Economic and Environmental Impact A. Model 1: PET bottle cost B. Model 2: HDPE bottle cost C. Model 3: Renewably sourced HDPE bottle cost D. Comparison 4: Comparison of Models 1 to 3 Allied Development Corp. Polyethylene Bottles Table of Contents - 2
3 Section V: 1. Material cost 2. Converting cost 3. Total cost E. Model 5: PET bottle LCA F. Model 6: HDPE bottle LCA G. Model 7: Renewably sourced HDPE bottle LCA 4. End of life H. Comparison 8: Comparison of Models 5 to 7 1. Energy I. Comparison 9: Economic and Environmental Summary Market A. Drivers and trends 1. Demand determinants 2. Macroeconomic environment 3. Environmental 4. Economic 5. Product concentrations 6. Merchant versus captive manufacturing 7. Shelf appeal 8. Consumer trends 9. Government regulations 10. Industry consolidation B. Global PE bottle volume by end-use category C. Global PE bottle value by end-use category Allied Development Corp. Polyethylene Bottles Table of Contents - 3
4 D. Global beverage PE bottle volume by end-use 1. Juice beverages 2. Milk 3. Water 4. Other beverages E. Global food PE bottle volume by end-use 1. Coffee 2. Condiments 3. Other food F. Global household chemical PE bottle volume by end-use 1. Dish soap 2. Laundry soap 3. Other Household chemicals G. Global personal care PE bottle volume by end-use 1. Skin care 2. Hair care 3. Other personal care H. Global pharmaceutical PE bottle volume by end-use 1. Over-the-counter (OTC) 2. Prescription (Rx) I. Global other PE bottle volume by end-use 1. Automotive 2. Paint 3. Other products J. Global volume by geographic region K. Global value by geographic region L. Asian PE bottle volume M. European PE bottle volume N. North American PE bottle volume O. Rest of world PE bottle volume P. Global value by end-use 1. Global beverage PE bottle value 2. Global food PE bottle value 3. Global household chemical PE bottle value 4. Global personal care PE bottle value 5. Global pharmaceutical PE bottle value 6. Global other PE bottle value Q. PE bottle volume segmented by barrier vs. non-barrier R. PE bottle volume segmented by layer configuration S. PE bottle volume segmented by treated vs. untreated Allied Development Corp. Polyethylene Bottles Table of Contents - 4
5 Section VI: T. PE bottle volume segmented by package type U. PE bottle volume segmented by renewable content V. PE bottle volume segmented by recycled resin content W. PE bottle volume segmented by resin density Equipment Profiles Section I: Producer Profiles Section II: Glossary Allied Development Corp. Polyethylene Bottles Table of Contents - 5
PET Bottles - 2015 to 2019
PET Bottles - 2015 to 2019 Section I: Section II: Introduction A. Study purpose B. Key definitions 1. PET bottles 2. Geography C. Study organization D. Geographic regions E. Study methodology F. Conventions
More informationINJECTION BLOW MOLDING WITH FDM
INJECTION BLOW MOLDING WITH FDM 3D PRODUCTION SYSTEMS Time Required Cost Skill Level By Susan Sciortino, Stratasys Inc. OVERVIEW Blow molding is a manufacturing process in which air pressure inflates heated
More informationCharacterization of Polymers Using TGA
application note Characterization of Polymers Using TGA W.J. Sichina, Marketing Manager Introduction Thermogravimetric analysis (TGA) is one of the members of the family of thermal analysis techniques
More informationSealed Air Corporation. Intermediate Bulk Containers For Aseptic and Non Aseptic Products
Sealed Air Corporation Intermediate Bulk Containers For Aseptic and Non Aseptic Products Melbourne, Australia Primary Manufacturing Pouch Making Injection molding for fitments Film extrusion Clean Room
More informationPlastic Recycling Collection: National Reach Study
Plastic Recycling Collection: National Reach Study May 2011 Moore Recycling Associates Inc. PO Box 1327 Sonoma, CA 95476 T 707.935.3390 F 707.935-1998 www.moorerecycling.com Plastic Recycling Collection:
More information1. Injection Molding (Thermoplastics)
1. Injection Molding (Thermoplastics) l Molding: Injection (thermoplastics) INJECTION MOLDING of thermoplastics is the equivalent of pressure die casting of metals. Molten polymer is injected under high
More informationCopyright 1998 Society of Manufacturing Engineers FUNDAMENTAL MANUFACTURING PROCESSES PLASTIC BLOW MOLDING NARRATION (VO): NARRATION (VO):
FUNDAMENTAL MANUFACTURING PROCESSES PLASTIC BLOW MOLDING SCENE 1. CG: EXTRUSION BLOW MOLDING white text centered on black SCENE 2. tape 401, 07:25:29-07:25:41 zoom in, extrusion process tape 401, 07:08:50-07:09:06
More information2007 UNITED STATES NATIONAL POST- CONSUMER PLASTICS BOTTLE RECYCLING REPORT
2007 UNITED STATES NATIONAL POST- CONSUMER PLASTICS BOTTLE RECYCLING REPORT INTRODUCTION The 2007 edition of the United States National Post-Consumer Plastics Bottle Recycling Report is the 18 th annual
More informationBIOPLASTICS & SUSTAINABILITY
BIOPLASTICS & SUSTAINABILITY Seminar Biobased Food Packaging FRANCOIS DE BIE 6/29/2015 Corbion Purac PLA cradle to cradle lifecycle 2 Bioplastics in the market today Albert Heijn Flex Pack 100% PLA Coca-Cola
More informationPolyolefin Heat Shrink Tubing for Tight-Tolerance Medical Applications
Polyolefin Heat Shrink Tubing for Tight-Tolerance Medical Applications Understanding the Advantages and Development Process By Apur Lathiya Vice President and General Manager, Vesta Thermoplastics Division
More informationCosmetic & Personal Care Packaging
Cosmetic & Personal Care Packaging Glass Packaging Plastic Packaging www.gerresheimer.com Cosmetic & Personal Care Packaging Gerresheimer Cosmetic & Personal Care Packaging Gerresheimer Momignies Belgium
More informationINJECTION MOLDING FRACTIONAL MELT INDEX, HIGH DENSITY POLYETHYLENE MATERIALS
INJECTION MOLDING FRACTIONAL MELT INDEX, HIGH DENSITY POLYETHYLENE MATERIALS Laren D. Shoup, Chevron Phillips Chemical Company LP Abstract When injection molding high density polyethylene (HDPE), typical
More informationNew Developments in Adhesive Resins for Oriented Barrier // PP Film Applications. Development Center Materials Lab.
New Developments in Adhesive Resins for Oriented Barrier // PP Film Applications Development Center Materials Lab. HIROTAKA UOSAKI Contents 1. Characteristics of Adhesive Resins 2. New Developments in
More informationBlow Molding Equipment Currently Available
Blow Molding Equipment Currently Available Table of contents: Section 1- Accumulator Head Blow Molding s (arranged larger to smaller head) Section 2- Continuous Extrusion- Shuttle Type Blow Molding s Section
More informationFLEXIBLE PACKAGING MARKET ASSESSMENT REPORT. Executive Summary
HIGH-BARRIER FILMS SUSTAINABILITY RECOVERY STAND UP POUCH SHELF STABILITY COST SAVINGS PILLOW POUCH FLEXIBLE PACKAGING MARKET ASSESSMENT REPORT Executive Summary 2015 11911 Freedom Drive Suite 600 Reston,
More information2013 UNITED STATES NATIONAL POST- CONSUMER PLASTICS BOTTLE RECYCLING REPORT
2013 UNITED STATES NATIONAL POST- CONSUMER PLASTICS BOTTLE RECYCLING REPORT INTRODUCTION The 2013 edition of the United States National Post-Consumer Plastics Bottle Recycling Report is the 24 th annual
More informationRigid Packaging in PET Products, Production & Critical Success Factors
Rigid Packaging in PET Products, Production & Critical Success Factors Andreas Blin Sales and Product Manager CPP and PET-Sheet Brückner Maschinenbau GmbH & Co. KG Brückner Group Members Brückner Maschinenbau
More information2014 UNITED STATES NATIONAL POSTCONSUMER PLASTICS BOTTLE RECYCLING REPORT
2014 UNITED STATES NATIONAL POSTCONSUMER PLASTICS BOTTLE RECYCLING REPORT INTRODUCTION The 2014 edition of the United States National Postconsumer Plastics Bottle Recycling Report is the 25 th annual report
More informationRecycling of plastic packaging in building materials. An Vossen Executive Manager
Recycling of plastic packaging in building materials An Vossen Executive Manager Plarebel PLAREBEL is a non-profit organisation that promotes the recycling of all plastic waste types in Belgium. Its members
More informationImproving Uptime in Aseptic Processing of Pharmaceutical Liquids with Blow-Fill-Seal
Improving Uptime in Aseptic Processing of Pharmaceutical Liquids with Blow-Fill-Seal Maximized uptime, minimized changeover time and efficient OEE are key factors that have influenced the acceptance of
More informationPlastics Converting in Europe
Understanding the plastics industry Plastics Converting in Europe The European Plastics Converters (EuPC) is the leading EU-level Trade Association, based in Brussels, representing European Plastics Converters.
More informationFoam Injection Molding:
Foam Injection Molding: Unique Process Solutions for Light Weighting Automotive Plastic Parts Steve Braig President & CEO Trexel, Inc. AGENDA Technology Overview > Chemical Foaming > Physical Foaming Foamed
More informationEnvironmental Stress Crack Resistance Of Polyethylene
Introduction to Environmental Stress Cracking and ESCR Over the past decade, high-density polyethylene (HDPE) materials have improved significantly and now meet more stringent performance standards; some
More informationMARCO DIRCETTI KEY ACCOUNT MANAGER CONSTANTIA FLEXIBLES
MARCO DIRCETTI KEY ACCOUNT MANAGER CONSTANTIA FLEXIBLES Organization logo to appear here A way to innovate in Flexible Packaging Marco Dircetti Key Account Manager Constantia Flexibles Constantia Flexibles
More informationAbstract Process Economics Program Report No. 141A POLYETHYLENE TEREPHTHALATE BOTTLES AND BOTTLE RESINS (May 1993)
Abstract Process Economics Program Report No. 141A POLYETHYLENE TEREPHTHALATE BOTTLES AND BOTTLE RESINS (May 1993) PET bottles are manufactured from PET bottle-grade resin by a sequential injection molding
More informationTetra Pak. Un pozzo di scienza I.T.I.S. F.Corni 27.03.09
Tetra Pak Un pozzo di scienza I.T.I.S. F.Corni 27.03.09 How do they do it? Discovery Channel, March 2008 In 1952 the first Tetra Pak package Today Benefits of aseptic technology Product remains fresh for
More informationBormed TM. Solutions for Healthcare Moulding and Film Applications
Bormed TM Solutions for Healthcare Moulding and Film Applications Borealis and Borouge are leading providers of innovative plastics solutions that create value for society. Building on their proprietary
More informationA Look at Accelerated Photostability Testing for Packaged Food and Drinks
A Look at Accelerated Photostability Testing for Packaged Food and Drinks By Dr. Oliver Rahäuser and Dr. Artur Schönlein Atlas Material Testing Technology GmbH Vogelsbergstr. 22, 63589 Linsengericht-Altenhaßlau,
More informationINNOVATIVE PLASTICS HIGH & LOW SHEAR RATE RHEOLOGY
INNOVATIVE PLASTICS HIGH & LOW SHEAR RATE RHEOLOGY A SABIC COMPANY Innovative Plastics is a strategic business unit of SABIC. Founded in 1976, SABIC is today the first public, global multinational enterprise
More informationAutomotive Oil & Fuel Filter Market
http://www.gosreports.com Smart Label Market by Type (EAS, RFID, Sensing, & ESL), Tracking Application, Industry (Aerospace, Data Centre & Library, Food & Beverage, Healthcare & Pharmaceutical, Logistics,
More informationMarketsandMarkets. http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample
MarketsandMarkets http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample Phone: 800.298.5699 (US) or +1.240.747.3093 or +1.240.747.3093 (Int'l) Hours: Monday - Thursday: 5:30am - 6:30pm
More informationPlastics: An Energy-Efficient Choice
Plastics: An Energy-Efficient Choice Introduction Plastics are derived from petroleum and natural gas. With increased public awareness and concern about waste and energy issues, some have questioned whether
More informationReduce Reduce Reduce. Reuse. Reuse. Recycle. Recycle. Lesson: Plastic Polymers. Background: Procedures:
Lesson: Plastic Polymers Grade: 4-5 Subject: Science Objectives: Students will: conduct a series of tests to determine the properties of different types of plastics audit the plastic waste generated in
More informationGlobal Injection Molded Plastics Market 2014-2018
Brochure More information from http://www.researchandmarkets.com/reports/2987461/ Global Injection Molded Plastics Market 2014-2018 Description: About Injection Molded Plastics Injection molded plastics
More informationBottled Water - Market Overview
Bottled Water - Market Overview July 2012 Disclaimer The following information is offered in good faith and represents an unqualified interpretation of a range of industry commentary and market data. It
More informationPET (Polyethylene Terephthalate, Resin Identification Code #1) PET Bottles (Carbonated Beverage, Water, and Custom Bottles)
PET (Polyethylene Terephthalate, Resin Identification Code #1) Highlights Non-PET package parts labels, closures, attachments should float in water Confirm adhesives used with pressure sensitive labels
More informationHousehold Waste Collection. Customer Charter
Household Waste Collection Customer Charter 1 1. INTRODUCTION The City Bin Co. is committed to providing the highest standards in the provision of waste management services to their customers. We have
More informationAccelerated Capital Allowances Eligibility Criteria
Ref. No.: IBM-C1.1 Accelerated Capital Allowances Eligibility Criteria Category: Electro-Mechanical Systems Technology: Injection Blow Moulding Machines An Injection Blow Moulding Machine (IBMM) is a machine
More informationWORLD PLASTICS MARKET REVIEW. By Bill Kuhlke and Dr. Tom Walsh
WORLD PLASTICS MARKET REVIEW By Bill Kuhlke and Dr. Tom Walsh OUTLINE OVERVIEW OF THE PLASTICS INDUSTRY MAJOR THERMOPLASTICS TO BE REVIEWED POLYETHYLENE POLYPROPYLENE POLYSTYRENE CONCLUSIONS THE PLASTICS
More informationTHE POLYMERS BUSINESS
Early bird offer Book 6 weeks before the course and receive a 10% discount FUNDAMENTALS OF THE POLYMERS BUSINESS A comprehensive introduction to the world of polymers This two-day interactive course provides
More informationPROCESSING OF VARIOUS MATERIALS
4 PROCESSING OF VARIOUS MATERIALS CHAPTER CONTENTS 4.1 Shaping Processes for Polymers Polymers Manufacturing Processes for Polymers 4.2 Rubber Processing Technology Processing of rubber into finished good
More informationSustainable Purchasing Guide Promotional Items
Promotional Items Promotional Items Introduction This section provides information on currently available promotional item options that can help to move the University of Saskatchewan toward its sustainability
More informationThe challenge of mixed plastics recycling. Luca Stramare R&D Manager COREPLA (Italy)
The challenge of mixed plastics recycling Luca Stramare R&D Manager COREPLA (Italy) 2 Plastic packaging Protection Convenience Information Producer Transport Marketing Consumer 3 The problem begins at
More informationThe ColorMatrix quick guide to liquid color. for plastics and silicones
The ColorMatrix quick guide to liquid color for plastics and silicones 1 Colorant selection Understanding which colorant technology best suits your particular product application will help ensure you gain
More informationRoswell. Recycling Center. Roswell Recycling Center. 11570 Maxwell Road Alpharetta, GA 30004 Phone: 770.442.8822 Fax: 770.442.0963 www.roswellgov.
Roswell Recycling Center Roswell Recycling Center 11570 Maxwell Road Alpharetta, GA 30004 Phone: 770.442.8822 Fax: 770.442.0963 www.roswellgov.com MATERIALS Large Metal Aluminum Small Metal Glass Bottles
More informationMULTILAYER CONTAINERS FEATURING NANO-NYLON MXD6 BARRIER LAYERS WITH SUPERIOR PERFORMANCE AND CLARITY
MULTILAYER CONTAINERS FEATURING NANO-NYLON MXD6 BARRIER LAYERS WITH SUPERIOR PERFORMANCE AND CLARITY INTRODUCTION This presentation addresses the subject of PET bottles designed for applications requiring
More informationNotes on Polymer Rheology Outline
1 Why is rheology important? Examples of its importance Summary of important variables Description of the flow equations Flow regimes - laminar vs. turbulent - Reynolds number - definition of viscosity
More informationNERC Northeast Recycling Council, Inc.
NERC Northeast Recycling Council, Inc. 139 Main Street, Suite 401 Brattleboro, Vermont 05301-2800 802.254.3636 802.254.5870 fax www.nerc.org info@nerc.org Managing Pharmaceutical Waste: Best Management
More informationMarketsandMarkets. http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample
MarketsandMarkets http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample Phone: 800.298.5699 (US) or +1.240.747.3093 or +1.240.747.3093 (Int'l) Hours: Monday - Thursday: 5:30am - 6:30pm
More informationPET Basics RECYCLED CONTENT
LIGHTWEIGHT SAFE STRONG FEATURES, BENEFITS & INFORMATION RESOURCES PET Basics RECYCLED CONTENT RECYCLABLE National Association for PET Container Resources SHATTERPROOF TRANSPARENT VERSATILE > PET Basics
More informationDevelopment of Low-cost Filling System Indispensable to Beverage Industry
65 Development of Low-cost Filling System Indispensable to Beverage Industry TANAKA DAISUKE *1 SUGIYAMA SHIGEHIRO *2 YAMAKOSHI HIDEO *3 MIZUNO MOTOHIRO *4 HARA TADASHI *5 There is a growing need for lower-cost
More informationMarketsandMarkets. http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample
MarketsandMarkets http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample Phone: 800.298.5699 (US) or +1.240.747.3093 or +1.240.747.3093 (Int'l) Hours: Monday - Thursday: 5:30am - 6:30pm
More informationPERSONAL SUPPORT INVENTORY To be filled out by: Parent/Family/Guardian/Support person
PERSONAL SUPPORT INVENTORY To be filled out by: Parent/Family/Guardian/Support person EATING AND FOOD PREPARATION Preparing meals and snacks: Gathers ingredients and equipment Opens containers Follows
More informationUnderstanding Plastics Engineering Calculations
Natti S. Rao Nick R. Schott Understanding Plastics Engineering Calculations Hands-on Examples and Case Studies Sample Pages from Chapters 4 and 6 ISBNs 978--56990-509-8-56990-509-6 HANSER Hanser Publishers,
More informationStora Enso Barrier Coating Options. English
Stora Enso Barrier Coating Options English Replacing fossil-based materials with renewable materials There are no longer any excuses to opt for anything but a renewable packaging material. Even in demanding
More informationSustainable Plastics with Reduced Carbon Footprint & Reduced Waste
Sustainable Plastics with Reduced Carbon Footprint & Reduced Waste Joseph P. Greene California State University, Chico Chico, CA 95929-0789 Abstract Plastic products can be made more sustainable by reducing
More informationph Measurements of Common Substances
Chem 100 Section Experiment 10 Name Partner s Name Introduction ph Measurements of Common Substances The concentration of an acid or base is frequently expressed as ph. Historically, ph stands for the
More informationDEMYSTIFYING RECYCLING PLASTIC
DEMYSTIFYING RECYCLING PLASTIC You may have seen the plastic resin chart, but what do those numbers actually mean, and why should they be important to you? The industry calls it the resin identification
More informationMarket Trends and Developments 1
Market Trends and Developments 1 Introduction The global packaging industry turnover is around $500 billion, with packaging container sales accounting for the major part and packaging machinery sales estimated
More informationMarketsandMarkets. http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample
MarketsandMarkets http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample Phone: 800.298.5699 (US) or +1.240.747.3093 or +1.240.747.3093 (Int'l) Hours: Monday - Thursday: 5:30am - 6:30pm
More informationGriffin Disposal and Recycling Services
Griffin Disposal and Recycling Services 1-800-693-0472 We ve all heard the term green or eco. If you are already recycling or composting, you have a head start on going green! Practicing the 4Rs Reduce,
More informationMarketsandMarkets. http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample
MarketsandMarkets http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample Phone: 800.298.5699 (US) or +1.240.747.3093 or +1.240.747.3093 (Int'l) Hours: Monday - Thursday: 5:30am - 6:30pm
More informationMarketsandMarkets. http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample
MarketsandMarkets http://www.marketresearch.com/marketsandmarkets-v3719/ Publisher Sample Phone: 800.298.5699 (US) or +1.240.747.3093 or +1.240.747.3093 (Int'l) Hours: Monday - Thursday: 5:30am - 6:30pm
More informationRecycling Plastic Milk Bottles at School - Frequently Asked Questions
Recycling Plastic Milk Bottles at School - Frequently Asked Questions Why recycle plastic milk bottles? Can paperboard milk cartons be recycled? How much extra work is involved for staff? How complicated
More informationSchool Recycling 101. Brought to you by. www.acua.com
School Recycling 101 Brought to you by www.acua.com School Recycling 101 Schools play an essential role in keeping our environment healthy and clean. Educating students about recycling and implementing
More informationPET Recycling Report Long-Term Trends and New Initatives Resa A. Dimino Director of Public Policy
PET Recycling Report Long-Term Trends and New Initatives Resa A. Dimino Director of Public Policy NERC s Fall 2014 Conference: The New Era of Recycling November 6, 2014 Summary Introduction to NAPCOR The
More informationROHACELL Triple F. Complex shaped PMI Foam Cores for highly efficient FRP Composite
Complex shaped PMI Foam Cores for highly efficient FRP Composite ROHACELL Triple F Sandwich Fabrication for low to - A Novel Particle Foam high volume applications SAMPE tesdr. Kay Brazil Conference 2015
More informationThe GEA Group. May 2015. GEA Group Aktiengesellschaft
The GEA Group May 2015 GEA Group Aktiengesellschaft The GEA Group in Summary The GEA Group is one of the largest providers for equipment and process technology particularly for the food industry where
More informationUNDERSTANDING BIOBASED CARBON CONTENT
UNDERSTANDING BIOBASED CARBON CONTENT Society of the Plastics Industry Bioplastics Council February 2012 www.bioplasticscouncil.org COPYRIGHT AND DISCLAIMER This report is copyright 2011, The Society of
More informationBIG BENEFITS IN SMALL PACKAGING... Unilever s strategy for sustainable packaging
BIG BENEFITS IN SMALL PACKAGING... Unilever s strategy for sustainable packaging Humberto Garcia Packaging Manager for Environmental Sustainability, Unilever PRESENTED BY: Packaging as part of the overall
More informationLIST OF CONTENTS AND TABLES
LIST OF CONTENTS AND TABLES Bottled Water in South Korea - Category analysis... 1 Headlines... 1 Trends... 1 Competitive Landscape... 2 Prospects... 2 Category Data... 3 Institutional Bottled Water Sales...
More informationServer Deployment Overview
Server Deployment Overview OpenText Exceed ondemand Managed Application Access Solutions for Enterprise OpenText Connectivity Solutions Group February 2011 Abstract No two business environments are identical,
More informationAPR Design for Recyclability Guidelines Section Excerpt
APR Design for Recyclability Guidelines Section Excerpt Please note: This is only one section excerpted from the Guidelines. The text of the entire document can be found elsewhere on the APR Website. PET
More informationEmployment Change Due to Carbon Pricing, 2035 Policy Scenario Vs Baseline Industry Name North American Industrial Classification System # (NAICS)
Employment Change Due to Carbon Pricing, 2035 Policy Scenario Vs Baseline Industry Name North American Industrial Classification System # (NAICS) 2035 (Net Jobs) Construction - 23 4774 1.21% Scientific
More informationInnovative Solutions for a Range of Packaging Applications. Packaging EMEA
Innovative Solutions for a Range of Packaging Applications Packaging EMEA Changing the Game in Packaging Packaging is a critical component of the final product. Protection, convenience, information and
More informationCanada s Organic Market National Highlights, 2013
Canada s Organic Market National Highlights, 2013 IN LATE 2012, THE CANADA ORGANIC TRADE ASSOCIATION LAUNCHED THE ORGANIC MARKET RESEARCH PROGRAM, THE MOST COMPREHENSIVE STUDY OF CANADA S ORGANIC MARKETPLACE
More informationThe Future in the Food Markets
The Future in the Food Markets Nestlé Vs. Unilever Prepared by: Dagmar Bär Sofia Pinheiro Pedro Ribeiro Johanna Turpeinen Competitive Intelligence UBI 1 History Nestlé and Unilever had completely different
More informationNAN YA NYLON 66 Engineering Plastics. Flame Retardant.High Toughness.Heat Resistant. Impact Resistant.Moldability.Low Warpage
NAN YA NYLON 66 Engineering Plastics Flame Retardant.High Toughness.Heat Resistant. Impact Resistant.Moldability.Low Warpage Introduction NAN YA FR-NYLON 66 has water absorption propertieslike other nylons.
More informationOnline sights by Burst Media
Consumers Willing to Spend More Green to Go Green January 2010 Copyright 2010 Consumers Willing To Spend More Green to Go Green In the past few years, automotive, consumer product, and manufacturing companies
More informationPackaging for Mineral Water and SFBs Sanpellegrino s Perspective. Fabio Chimetto AG Packaging Manager Sanpellegrino SpA
Packaging for Mineral Water and SFBs Sanpellegrino s Perspective Fabio Chimetto AG Packaging Manager Sanpellegrino SpA Sanpellegrino Group is The biggest player in the non alcoholic beverage within the
More informationLatin American Experience
Latin American Experience Cedar is global management consulting firm with a network of offices in 15 countries, having served over 800 clients since 1985. Formerly part of Renaissance Worldwide, a $1 Billion
More informationPERP/PERP ABSTRACTS 2010. PET Bottle to Bottle Recycling
PERP/PERP ABSTRACTS 2010 PET Bottle to Bottle Recycling PERP Report Abstract March 2010 PERP Report Abstract (of PERP REPORT 08/09S9) PET Bottle to Bottle Recycling March 2010 The ChemSystems Process Evaluation/Research
More informationOverview of the PET Plastic Recycling Process
Overview of the PET Plastic Recycling Process One of the most familiar types of plastic packaging found in American households is made from a plastic called polyethylene terephthalate, or PET for short.
More informationTo receive this report via e-mail, please go to: www.factset.com/data/news_research/researchdesk
EARNINGS INSIGHT John Butters, VP, Sr. Earnings Analyst jbutters@factset.com Media Questions/Requests media_request@factset.com S&P 500 June 24, 2016 Key Metrics Earnings Growth: For Q2 2016, the estimated
More information725-R-599 PIPE LINING. (Revised 05-01-12) SECTION 725, BEGIN LINE 1, INSERT AS FOLLOWS: SECTION 725 SLIP LINING OF EXISTING PIPE
PIPE LINING (Revised 05-01-12) The Standard Specifications are revised as follows: SECTION 725, DELETE LINES 1 THRU 317. SECTION 725, BEGIN LINE 1, INSERT AS FOLLOWS: SECTION 725 SLIP LINING OF EXISTING
More informationPiramal Glass. Investment Idea. Turnaround story. Investment Rationale. Company Description. Horizon 12-18 months. CMP:106 Target:146 View: Buy
Piramal Glass Price (Rs.) Market Cap (Rs.Crs.) 52 High / Low (Rs.) Mcap/Sales TTM Book Value (Rs.) TTM PE TTM EPS P/BV FV BSE NSE 106 785 142/79.15 0.77 28 10.9 8.9 3.5 10 532949 PIRGLASS Shareholding
More informationSimon Field, ACII Chartered Insurance Practitioner IBM Zurich Research Lab, Switzerland sif@zurich.ibm.com
IBM Dynamic Insurance Product Configuration Simon Field, ACII Chartered Insurance Practitioner IBM Zurich Research Lab, Switzerland sif@zurich.ibm.com Copyright IBM Corp. 2002 All Rights Reserved Business
More informationCanada s Organic Market National Highlights, 2013
Canada s Organic Market National Highlights, 2013 IN LATE 2012, THE CANADA ORGANIC TRADE ASSOCIATION LAUNCHED THE ORGANIC MARKET RESEARCH PROGRAM, THE MOST COMPREHENSIVE STUDY OF CANADA S ORGANIC MARKETPLACE
More informationINDUSTRY INTRODUCTION: PLASTICS
PLASTICS INDUSTRY INTRODUCTION: PLASTICS A day without plastics is unthinkable in a modern, sustainable society. Plastics is used in an endless number of items in our daily lives and is extremely valuable
More information2011-2015. Sample-Global Big Data Market in the Healthcare Sector. technavio insights
1 technavio insights About TechNavio Technavio is the research platform of Infiniti Research. Infiniti Research provides actionable market intelligence to leading companies worldwide. A team of 120 analysts
More informationYour 2015 / 2016 Recycling Guide. We re recycling are yo? wasteteam@chiltern.gov.uk wasteteam@wycombe.gov.uk www.chiltern.gov.uk www.wycombe.gov.
Your 2015 / 2016 Recycling Guide We re recycling are yo? 01494 586550 wasteteam@chiltern.gov.uk wasteteam@wycombe.gov.uk www.chiltern.gov.uk www.wycombe.gov.uk Mixed recycling blue wheeled bin or reusable
More informationGas Membrane and Waterproof Tanking Systems
Gas Membrane and Waterproof Tanking Systems Improving Choice, Quality & Service Why Choose Miers? About Miers Miers Construction Products is an independent supplier of construction products delivering
More informationPLASTIC TECHNOLOGIES, INC. CONSUMER PACKAGED GOODS & RETAIL
PLASTIC TECHNOLOGIES, INC. CONSUMER PACKAGED GOODS & RETAIL Challenge: PTI, a leader in plastic packaging design services, wanted a more cost-effective and efficient alternative to extensive physical prototyping
More informationAluminium foil properties: Applications of aluminium foils and thin gauge strips in thickness below 0,50 mm:
1 ALUMINIUM FOILS AND THIN GAUGE STRIPS The year 2010 has been celebrated as the 100th anniversary of aluminium foil. Ever since the beginning in 1910 the usage of foil has been growing and products developed
More informationTECHNICAL TIPS FOR BLOW MOLDING MILK, WATER AND JUICE BOTTLES. The Advantages and Disadvantages of Ovalized Tooling in the Dairy Industry
TECHNICAL TIPS FOR BLOW MOLDING MILK, WATER AND JUICE BOTTLES The Advantages and Disadvantages of Ovalized Tooling in the Dairy Industry TECHNICAL TIPS FOR BLOW MOLDING MILK, WATER AND JUICE BOTTLES The
More informationUsing Near-Infrared Sorting to Recycle PLA Bottles
Using Near-Infrared Sorting to Recycle PLA Bottles Introduction Plastic bottle recycling provides value to the environment and society because of the recognized environmental and economic benefits. Recycling
More informationLife Cycle Assessment of Reusable and Single-use Plastic Bags in California
California State University, Chico Institute for Sustainable Development Life Cycle Assessment of Reusable and Single-use Plastic Bags in California January 2011 Produced under contract by: California
More informationnature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING
nature invented packaging. We improved it. DuPont Tyvek PROTECTIVE PACKAGING Why Tyvek? Since its discovery back in 1955, DuPont TM Tyvek has been used in various sectors for a wide range of purposes.
More informationIndustry Analysis and Skills Foresight Appendix 1 Printing and Packaging Industry
Industry Analysis and Skills Foresight Appendix 1 Printing and Packaging Industry INDUSTRY ANALYSIS Page 1 of 10 Introduction The printing and packaging companies in Trinidad and Tobago are involved in
More information