Soft-close inside. The entire damper technology is concealed inside the hinge arm.

Transcription

1 << Grass Tiomos Soft & Self-Close H-2 << Grass Nexis & Impresso H-16 << Grass Unisoft Soft-Close H-29 << Grass Soft & Self-Close Face Frame H-30 << Grass Institutional Barrel H-36 << RPC 5-Knuckle Institutional H-37 << Sugatsune Elan Door Lifter Systems H-40 << EPCO Glass Door H-54 section H Table of contents Starting Page Grass Tiomos Soft & Self-Close H-2 Grass Nexis & Impresso H-16 Grass Soft-Close H-28 Grass Face Frame H-30 Grass Institutional Barrel H-36 5-Knuckle Institutional H-37 Flap H-38 Sugatsune Door Lifter Systems H-40 Amerock Decorative H-45 Amerock Full Inset Finial Tip H-50 Terry Continuous/Piano H-52 Glass Door H-53 Hinge, Hardware & Slide Screws H-55 & Lid A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-1

2 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS TIOMOS HINGE SYSTEM Tiomos Integrated Soft-Close, Self-Close and Free-Swing Hinge Soft-close inside. The entire damper technology is concealed inside the hinge arm. A completely new hinge system. Tiomos is a completely new hinge concept. The product range provides perfect movement for virtually every application, from standard doors to wide angle doors, from frameless to face frame applications. Tiomos offers an adjustable soft close mechanism, which is fully integrated and concealed in the hinge arm. The closing process is extremely smooth from the degree that the Soft-close is activated until the door is completely shut. The cabinet door pulls open with ease and minimal gaps can be achieved. Tool-less Soft-close adjustment Soft-closing performance can be regulated for any door size and weight with the Tiomos adjustable, integrated Soft-Close. Each hinge can be adjusted differently with a 2 hinge install giving you 6 Soft-close settings. Light setting Adjustment lever points toward the cabinet wall. Appropriate for: Small, light doors Adjustments The options for height adjustment depend on the type of base plate. All adjustments can be made independent of one another. For height adjustment, select base plates have worm gear adjustment access through the hinge arm. Medium setting (factory setting) Adjustment lever is parallel to the cabinet wall. This setting covers 80% of door applications. Side adjustment Appropriate for: Standard doors Depth adjustment via worm gear Strong setting Adjustment lever points toward the cabinet interior. Appropriate for: Large, heavy doors Height adjustment via base plate H-2 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

3 Tiomos Technical Information Reveal The reveal (R) is the distance required between two doors or between the door and sidewall of the cabinet to allow sufficient space for opening the door. The required reveal width (R) depends on the thickness of the door. Most cabinet makers prefer a reveal (R) of between 3mm and 6mm. Reveal for full overlay, overlay, & half overlay doors The table shows the reveal necessary between two doors or between door and side wall to allow enough space for opening the door. Example: For a door thickness of 19mm and a drilling distance (DD) of 6mm a (R) reveal of 0.9mm is needed. Full Overlay/Overlay Door Note: Reveal dimensions were determined with a door edge radius of 1mm. Hinge dimensions and calculation of reveal with factory setting. Drilling Distance Cup Center Number of hinges per door The number of hinges required depends on the size and weight of the door. The distance between the hinges should be spaced as wide as possible. Use the diagram to determine the number of hinges needed. These recommendations are for doors without any accessory attachments. Reveal Overlay Base Plate Centerline Inset Reveal Reveal GRASS TIOMOS HINGE SYSTEM Half Overlay Door Reveal for inset doors The table shows the minimum reveal for an inset door, depending on the drilling distance (DD) and the base plate height (BPH). Example: A drilling distance (DD) of 6mm results from using a base plate with height of 3mm and a reveal (R) of 1.0mm Inset Door IMPORTANT: To determine the correct application, Grass strongly recommends a trial mounting for all hinges and base plates. Twin Application Reveal A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-3

4 H GRASS TIOMOS IMPRESSO TOOL-LESS HINGES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband H-4 Installation Tiomos Impresso - Quick, simple and reliable hinge mounting without tools. The Tiomos Impresso hinge series is designed to assemble quickly and easily without tools. This is especially useful in cabinetry that is flat-packed and shipped unassembled with pre-drilled doors. The Tiomos Impresso hinge can MILWAUKEE p f be installed quickly and accurately on site. Simply insert the Tiomos Impresso hinge into the bored door and close the hinge flap to engage. The hinge sits firmly and securely in the door and does not allow for twisting due to a 3 point connection of the hinge cup to the door. The Tiomos Impresso is perfect for door material such as particleboard, MINNESOTA p f solid wood, and MDF board. Hinge cup with combination drilling pattern. All Impresso hinges are offered in a combination drilling pattern 42mm / 45mm. This combination fits all of the most popular boring patterns offered in today s market. Tool-Less Standard - Available Free-Swing, Soft-Close and Self-Close (Fits 42 and 45mm Pattern) Description Qty Less Full FREE-SWING # Less Full 110 OPENING - IMPRESSO TOOL-LESS HINGES 19mm Overlay 150 EA GRAF Half Overlay 150 EA GRAF SOFT-CLOSE # SELF-CLOSE # Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF OPENING - IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF OPENING - IMPRESSO TOOL-LESS HINGES Full+ 25mm Overlay 50 EA GRAF GRAF mm Overlay 50 EA GRAF GRAF Half Overlay 50 EA GRAF GRAF OPENING - THINK DOOR - IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF Tool-Less Specialty - Available Soft-Close and Self-Close (Fits 42 and 45mm Pattern) Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 110 OPENING - BLIND CORNER - IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF OPENING ANGLE - IMPRESSO TOOL-LESS HINGES 20.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF OPENING ANGLE - IMPRESSO TOOL-LESS HINGES 21.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF OPENING ANGLE - IMPRESSO TOOL-LESS HINGES 19.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF OPENING ANGLE - IMPRESSO TOOL-LESS HINGES 18mm Overlay 100 EA GRAF GRAF OPENING ANGLE - IMPRESSO TOOL-LESS HINGES 19mm Overlay 100 EA GRAF GRAF OPENING ANGLE - IMPRESSO TOOL-LESS HINGES 12mm Overlay 100 EA GRAF GRAF Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H-15 Download a Grass Tiomos catalog at TRAVERSE CITY, MI p f ST LOUIS, MO p f

5 Tiomos 110 Snap-On Free-Swing, Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns Door thickness up to 24mm (15/16") Accommodates overlays up to 22mm (7/8") Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Free-Swing, Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Full+ overlay Overlay Half overlay Inset GRASS TIOMOS 110 OPENING HINGES Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Screw-On Impresso & Doweled Description Qty Less Full FREE-SWING # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 19mm Overlay 150 EA GRAF Half Overlay 150 EA GRAF SOFT-CLOSE # SELF-CLOSE # Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF MM BORE DOWELED HINGES (GRASS PATTERN) Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF MM BORE SCREW-ON HINGES Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF ACCESSORIES Qty Item # Less Full 85 Opening Angle Reduction Clip 50 EA GRAF Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-5

6 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS TIOMOS 120 OPENING HINGES Tiomos 120 Snap-On Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns Door thickness up to 24mm (15/16") Accommodates overlays up to 22mm (7/8") Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Full+ overlay Overlay Half overlay Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Download a Grass Tiomos catalog at Minimum Reveal Screw-On Impresso & Doweled Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF MM BORE DOWELED HINGES (GRASS PATTERN) Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF MM BORE SCREW-ON HINGES Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF ACCESSORIES Qty Item # Less Full 85 Opening Angle Reduction Clip 50 EA GRAF Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 H-6 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

7 Tiomos 160 Snap-On Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns Door thickness up to 32mm (1-1/4") Accommodates overlays up to 25.4mm (1") Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Shallow (10mm) cup depth Zero protrusion when door is opened 90 Available Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Full+ overlay GREEN BAY p f Overlay SUN PRAIRIE p f Half overlay Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Note: Standard cup distance is 3mm. Larger overlays are accomplished by increasing the cup distance. Download a Grass Tiomos catalog at WEST SALEM p f GRASS TIOMOS 160 OPENING HINGES PEKIN, IL p f Minimum Reveal Screw-On Impresso & Doweled Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full+ 25mm Overlay 50 EA GRAF GRAF mm Overlay 50 EA GRAF GRAF Half Overlay 50 EA GRAF GRAF MM BORE DOWELED HINGES (GRASS PATTERN) Full+ 25mm Overlay 50 EA GRAF GRAF mm Overlay 50 EA GRAF GRAF Half Overlay 50 EA GRAF GRAF MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 25mm Overlay 50 EA GRAF GRAF mm Overlay 50 EA GRAF GRAF Half Overlay 50 EA GRAF GRAF MM BORE SCREW-ON HINGES Full+ 25mm Overlay 50 EA GRAF GRAF mm Overlay 50 EA GRAF GRAF Half Overlay 50 EA GRAF GRAF ACCESSORIES Qty Item # Less Full 120 Opening Angle Reduction Clip 50 EA GRAF Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-7

8 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband H-8 GRASS TIOMOS 95 OPENING THICK DOOR HINGES Tiomos 95 Snap-On Thick Door Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns Door thickness up to 36mm (1-7/16") Accommodates overlays up to 22mm (7/8") Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Full+ overlay Overlay Half overlay Inset Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Set mounting plate back by door thickness +1.5 mm Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF MM BORE DOWELED HINGES (GRASS PATTERN) Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF MM BORE SCREW-ON HINGES Full+ 22mm Overlay 150 EA GRAF GRAF mm Overlay 150 EA GRAF GRAF Half Overlay 150 EA GRAF GRAF Inset Hinge 150 EA GRAF GRAF ACCESSORIES Qty Item # Less Full 85 Opening Angle Reduction Clip 50 EA GRAF Download a Grass Tiomos catalog at MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f Screw-On ST LOUIS, MO p f Impresso & Doweled Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15

9 GREEN BAY p f SUN PRAIRIE p f GRASS TIOMOS 110 OPENING BLIND CORNER HINGES Tiomos 110 Snap-On Blind Corner Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns For use on Overlay or Inset Blind Corner Doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Installation lnformation Overlay Inset Screw-On Mounting plate height 3 Mounting plate height 3 Impresso Drilling distance (x) Download a Grass Tiomos catalog at Drilling distance (x) WEST SALEM p f Cup distance PEKIN, IL p f Drilling distance (x) Cup distance Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full+ 22mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full+ 22mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF MM BORE SCREW-ON HINGES Full+ 22mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF Doweled Drilling distance (x) Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-9

10 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS TIOMOS 110 OPENING SPECIAL ANGLE CABINET HINGES Tiomos 110 Snap-On +30 Soft-Close and Self-Close Available Screw-On and Tool-Less in 42 & 45mm Patterns For use on overlay or inset 30 positive angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 0 Tiomos 110 Snap-On +37 Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns For use on overlay or inset 37 positive angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 0 Screw-On Download a Grass Tiomos catalog at Impresso Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 20.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF MM BORE SCREW-ON HINGES 20.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF Screw-On Impresso Doweled Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 21.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) 21.5mm Overlay 100 EA GRAF GRAF MM BORE SCREW-ON HINGES 21.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 H-10 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

11 GRASS TIOMOS OPENING SPECIAL ANGLE CABINET HINGES Tiomos 110 Snap-On +45 Soft-Close and Self-Close Available Screw-On, Doweled and Tool-Less in 42 & 45mm Patterns For use on overlay or inset 45 positive angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 0 Tiomos 120 Snap-On -15 Soft-Close and Self-Close Available Screw-On and Tool-Less in 42 & 45mm Patterns For use on overlay -15 negative angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 0 Screw-On Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 19.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) 19.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF MM BORE SCREW-ON HINGES 19.5mm Overlay 100 EA GRAF GRAF Inset Hinge 100 EA GRAF GRAF Screw-On Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 18mm Overlay 100 EA GRAF GRAF MM BORE SCREW-ON HINGES 18mm Overlay 100 EA GRAF GRAF Impresso Download a Grass Tiomos catalog at go to: Impresso Doweled Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-11

12 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS TIOMOS 120 OPENING SPECIAL ANGLE CABINET HINGES Tiomos 120 Snap-On -30 Soft-Close and Self-Close Available Screw-On and Tool-Less in 42 & 45mm Patterns For use on overlay -30 negative angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Tiomos 120 Snap-On -45 Soft-Close and Self-Close Available Screw-On and Tool-Less in 42 & 45mm Patterns For use on overlay -45 negative angle cabinet doors Convenient depth adjustment via worm gear 3-dimensional adjustment with appropriate mounting plate Available Soft-Close with 3 adjustable closing levels or Self-Close Overlay Mounting plate height 2 Mounting plate height 2 Screw-On Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES 19mm Overlay 100 EA GRAF GRAF MM BORE SCREW-ON HINGES 19mm Overlay 100 EA GRAF GRAF Screw-On Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Half-12mm Overlay 100 EA GRAF GRAF MM BORE SCREW-ON HINGES Half-12mm Overlay 100 EA GRAF GRAF Download a Grass Tiomos catalog at Impresso Impresso Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 H-12 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

13 Tiomos 65 Snap-On Pie-Cut Corner Self-Close Available Screw-On or Doweled in 42 & 45mm Patterns For use on 2 folding doors in a corner cabinet Convenient depth adjustment via worm gear For door thicknesses mm 3-dimensional adjustment with appropriate mounting plate Available Self-Closing Used with Tiomos mm door thickness with base plate height 0 Tiomos 160 Hinge GRASS TIOMOS 65 OPENING PIE-CUT CORNER HINGES 19mm door thickness with base plate height 0 Tiomos PCC Hinge Screw-On Description Qty SELF-CLOSE # Less Full 42MM BORE DOWELED HINGES (GRASS PATTERN) Pie Cut Corner Hinge 150 EA GRAF MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Pie Cut Corner Hinge 150 EA GRAF MM BORE SCREW-ON HINGES Pie Cut Corner Hinge 150 EA GRAF Doweled Adjustment for door thickness 14-24mm. Factory setting is 19mm. Baseplates, Hinge Arm & Hinge Cup Cover Caps - pages H-14 & H15 Download a Grass Tiomos catalog at A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-13

14 H GRASS TIOMOS SNAP-ON BASEPLATES & ACCESSORIES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband Eco Wing Steel Mounting Plate, 3-Point Fixing, Wood Screw Attachment (37/32) Height Adjustment via Slot Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA Eco Wing Steel Mounting Plate, 3-Point Fixing, Pre-Attached 13.5mm Euro-Screws (37/32) Height Adjustment via Slot Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Wood Screw Attachment (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Euro-Screw Attachment (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Pre-Attached 13.5mm Euro-Screws (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Pre-Attached 10mm Euro-Screws (37/32) For Back to Back Mounting. Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 4-Point Fixing, Pre-Attached 5mm X 11mm Expanding Dowels (37/32) Can be Removed & Reinstalled w/minimal Damage - Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA 1D Wing Mounting Plate, 2-Point Fixing, Wood or Euro Screw Attachment (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 50 EA GRAF mm Steel Nickel Plate 50 EA GRAF mm Steel Nickel Plate 50 EA GRAF mm Steel Nickel Plate 50 EA GRAF mm Steel Nickel Plate 50 EA 1D Wing Mounting Plate, 2-Point Fixing, Pre-Attached 13.5mm Euro-Screws (37/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 50 EA GRAF mm Steel Nickel Plate 50 EA GRAF mm Steel Nickel Plate 50 EA GRAF mm Steel Nickel Plate 50 EA GRAF mm Steel Nickel Plate 50 EA H-14 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

15 GRASS TIOMOS SNAP-ON BASEPLATES & HINGE COVER CAPS H 1D Straight Mounting Plate, 2-Point Fixing, Wood Screw Attachment (20/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA 1D Straight Mounting Plate, 2-Point Fixing, Pre-Attached 13.5mm Euro-Screws (20/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA 1D Face Frame Mounting Plate, 2-Point Fixing, Wood Screw Attachment (9.5/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA Face Frame Mounting Plate, 2-Point Fixing, Wood Screw Attachment (9.5/32) Height Adjustment via Slot Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA Face Frame Mounting Plate with Lip, 4-Point Fixing, Wood Screw Attachment (9.5/32) Height Adjustment via Slot For use with softer woods such as pine, poplar or alder Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA GRAF mm Steel Nickel Plate 150 EA Inset Beaded Face Frame Mounting Plate, 3-Point Fixing, Wood Screw Attachment (10/32) Height Adjustment via Worm Gear Item # Description Qty Less Full GRAF mm Steel Nickel Plate 150 EA Requires Half-Overlay Hinge Mounting Plate Wedges for Special Angles For use with all wing mounting plates Can be stacked to achieve different angles +5 wedge -5 wedge Item # Description Qty Less Full +5 WEDGE FOR USE WITH WING MOUNTING PLATES (37/32) GRAF mm Zamak Nickel Plated Wedge / Can be Stacked (max 3) 50 EA -5 WEDGE FOR USE WITH WING MOUNTING PLATES (37/32) GRAF mm Zamak Nickel Plated Wedge / Can be Stacked (max 3) 50 EA Hinge Arm and Hinge Cup Cover Caps - Steel Nickel Plated Arm Cap Long Arm Cap Cup Cover Cap Item # Description Qty Less Full GRAF Hinge Arm Cover Cap for All 1000 EA GRAF Hinge Arm Cover Cap, Long, for Full Overlay Only 1000 EA GRAF Hinge Cup Cover Cap, for All 150 EA A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-15

16 H GRASS NEXIS IMPRESSO AND NEXIS HINGES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband Nexis Impresso Quick, simple and reliable hinge mounting without tools. The Nexis Impresso hinge series is designed to assemble quickly and easily without tools. This is especially useful in cabinetry that is flat-packed and shipped unassembled with pre-drilled doors. The Nexis Impresso hinge can be installed quickly and accurately on site. Simply insert the Nexis Impresso hinge into the bored door and close the hinge flap to engage. The hinge sits firmly and securely in the door and does not allow for twisting due to a 3 point connection of the hinge cup to the door. The Nexis Impresso is perfect for door material such as particleboard, solid wood, and MDF board. Hinge cup with combination drilling pattern. All Impresso hinges are offered in a combination drilling pattern 42mm / 45mm. This combination fits all of the most popular boring patterns offered in today s market. Nexis Proven technology makes Nexis the classic choice among hinge systems. The Nexis hinge series offer added value through a number of design solutions that will meet any application requirement whether it be frame or frameless. Choose from hinge opening angles ranging from 95 to 170 and from hinges designed for special applications such as negative angle and pie cut corner applications. The Nexis series is available in a screwon or doweled version and is offered in a 42mm or 45mm boring pattern. The Nexis base plates offer slotted or cam adjustment, 2-3 point fixing, screwon or Euro screw versions for frame and frameless cabinetry. The hinges mount easily in a user friendly snap-on method. Just one push connects the hinge to the plate. Add a touch of innovation with the unique Soft-close controlled closing device to bring a calming quiet to closing doors. During the closing action, the Soft-close creates a cushion that controls and slows the door to a gentle stop. The Soft-close device attaches easily without tools for a simple installation. H-16 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

17 GRASS NEXIS & IMPRESSO SNAP-ON HINGES 110 OPENING Nexis and Impresso 110 Snap-On & Soft Close Absorbers Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Stamped steel arm and cup with bright nickel finish Accepts hinge cup mounted soft closing device Impresso Series can be mounted on the job site with no tools. Impresso Series is compatible with 42mm or 45mm hinge boring equipment Description Qty SELF-CLOSE # Less Full FREE-SWING # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full Overlay 125 EA GRA Half Overlay 125 EA GRA Inset Hinge 125 EA GRA MM BORE DOWELED HINGES (GRASS PATTERN) Full Overlay 250 EA GRA Half Overlay 250 EA GRA MM BORE SCREW-ON HINGES Full Overlay 250 EA GRA Half Overlay 250 EA GRA MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full Overlay 250 EA GRA GRA Half Overlay 250 EA GRA GRA MM BORE SCREW-ON HINGES Full Overlay 250 EA GRA GRA Half Overlay 250 EA GRA GRA ANGLE REDUCTION CLIP Qty Item # Less Full 85 Opening Angle Reduction Clip 1000 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL FREE MOUNTING TO HINGES Complete Soft Close Absorber for Nexis 125 EA GRA Soft Close Adapter for Impresso (Need Damper) 125 EA GRA Soft Close Damper for Impresso Adapter (Need Adapter) 125 EA GRA For full inset applications use the half overlay hinge with an 8mm mounting plate GREEN BAY SUN PRAIRIE WEST SALEM p p p f f f PEKIN, IL p f Nexis Impresso Snap-on 110 Opening Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-17

18 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS NEXIS AND IMPRESSO SNAP-ON HINGES 125 OPENING Nexis and Impresso 125 Snap-On & Soft-Close Absorbers Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Stamped steel arm and cup with bright nickel finish Accepts hinge cup mounted soft closing device Impresso Series can be mounted on the job site with no tools. Impresso Series is compatible with 42mm or 45mm hinge boring equipment Description Qty SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full Overlay 125 EA GRA MM BORE DOWELED HINGES (GRASS PATTERN) Full Overlay 250 EA GRA Half Overlay 250 EA GRA MM BORE SCREW-ON HINGES Half Overlay 250 EA GRA MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full Overlay 250 EA GRA Half Overlay 250 EA GRA MM BORE SCREW-ON HINGES Full Overlay 250 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES SOFT-CLOSE Complete Soft Close Absorber for Nexis 125 EA GRA Soft Close Adapter for Impresso (Need Damper) 125 EA GRA Soft Close Damper for Impresso Adapter (Need Adapter) 125 EA GRA Nexis Impresso Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Download a Grass Nexis catalog at H-18 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

19 GREEN BAY p f GRASS NEXIS AND IMPRESSO SNAP-ON HINGES 170 OPENING Nexis and Impresso 170 Snap-On & Soft-Close Absorbers Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Accepts hinge arm mounted soft closing device Impresso Series can be mounted on the job site with no tools. Impresso Series is compatible with 42mm or 45mm hinge boring equipment Description Qty SELF-CLOSE # Less Full FREE-SWING # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full Overlay 50 EA GRA MM BORE DOWELED HINGES (GRASS PATTERN) Full Overlay 50 EA GRA Half Overlay 50 EA GRA MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Full Overlay 50 EA GRA Half Overlay 50 EA GRA MM BORE SCREW-ON HINGES Full Overlay 50 EA GRA GRA Half Overlay 50 EA GRA ANGLE REDUCTION CLIP Qty Item # Less Full 120 Opening Angle Reduction Clip 125 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Complete Hinge Arm Mounted Soft-Close Absorber for 170 Nexis & Impresso 125 EA GRA For full inset applications use the half overlay hinge with an 8mm mounting plate SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f Nexis Impresso Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Download a Grass Nexis catalog at A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-19

20 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS NEXIS & IMPRESSO SNAP-ON 95 OPENING THICK DOOR HINGE Nexis & Impresso 95 Snap-On Hinge for Thick Doors 3-dimensional adjustment with suitable base plate Soft-close compatible Accommodates overlays up to 19mm (3/4") Minimal gap dimensions on thick doors For door thicknesses up to 30mm (1-3/16") For face frame or frameless cabinets Door overlay max. Full Overlay Drilling distance (DD) Base Plate Height (BPH) Half Overlay Drilling distance (DD) Download a Grass Nexis catalog at Nexis Impresso Reveal Drilling distance (DD) Cup Drilling Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Description Qty SELF-CLOSE # Less Full 42-45MM BORE IMPRESSO TOOL-LESS HINGES Full Overlay 125 EA GRA MM BORE DOWELED HINGES (GRASS PATTERN) Full Overlay 250 EA GRA MM BORE SCREW-ON HINGES Full Overlay 250 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA Soft Close Adapter for Impresso (Need Damper) 125 EA GRA Soft Close Damper for Impresso Adapter (Need Adapter) 125 EA GRA For full inset applications use the half overlay hinge with an 8mm mounting plate Door overlay max. Base Plate Height (BPH) Use full overlay hinge with thick baseplates Reveal min. (R) Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Door thickness (DT) H-20 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

21 Download a Grass Nexis catalog at GREEN BAY p f GRASS NEXIS SNAP-ON 95 OPENING PROFILE DOOR HINGE Nexis 95 Snap-On Hinge with 40mm Cup for Profile Doors 3-dimensional adjustment with suitable base plate Accommodates overlays up to 23mm (7/8") Minimal gap dimensions on thick doors For door thicknesses up to 36mm Excellent weight capacity for heavy profile doors Special spring mechanism ensures excellent closing force on large doors For face frame or frameless cabinets Note: Requires a 40mm Bore Door overlay max. Full Overlay Drilling distance (DD) Base Plate Height (BPH) See Pages B-26 & B-27 for Baseplates SUN PRAIRIE p f Half Overlay WEST SALEM p f PEKIN, IL p f Nexis Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP See Page B-30 For Hinge Arm & Hinge Cup Cover Caps Description Qty SELF-CLOSE # Less Full 48MM BORE SCREW-ON HINGES Full Overlay 125 EA GRA Half Overlay 125 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA For full inset applications use the half overlay hinge with an 8mm mounting plate Door overlay max. Drilling distance (DD) Door thickness (DT) Reveal Drilling distance (DD) Reveal min. (R) A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-21

22 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS NEXIS SNAP-ON HINGES 65 OPENING PIE-CUT HINGES Nexis 65 Pie Cut Snap-On Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Zinc die cast arm and cup with bright nickel finish Used in conjunction with Series is a 45mm pattern, bore extends past the edge of the door 701 Series is a 42mm pattern that is bored away from the edge of the door 701 Series allows you to bore for the hinge cup without adjusting the machine fence 701 Series allows the doors to open straight from the cabinet, offset by the door thickness 701 Boring Pattern GRA GRA Installation Dimensions 701 Function Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 42MM BORE SCREW-ON HINGES Pie Cut Corner Hinge 25 EA GRA MM BORE DOWELED HINGES (GRASS PATTERN) Pie Cut Corner Hinge 25 EA GRA MM BORE SCREW-ON HINGES Pie Cut Corner Hinge 125 EA GRA H-22 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

23 GREEN BAY p f GRASS NEXIS SNAP-ON 95 HINGES FOR BLIND CORNER CABINETS Nexis 95 Snap-On Blind Corner & Soft Close Absorbers Tool-free hinge to baseplate connection and removal 3 dimensional adjustment: side, depth, and height Cam height and depth adjustment with select baseplates Zinc die cast arm and stamped steel cup with bright nickel finish Accepts hinge cup mounted soft closing device Download a Grass Nexis catalog at SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f Nexis Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) Inset Hinge 125 EA GRA MM BORE SCREW-ON HINGES Inset Hinge 125 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-23

24 H GRASS NEXIS SNAP-ON 95 OPENING POSITIVE ANGLE HINGES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband Nexis 95 Opening +30 Angle Snap-on Corner Hinge 3-dimensional adjustment with suitable base plate Soft-close compatible Minimal gap dimensions on door thickness up to 30mm Description Qty SELF-CLOSE # Less Full 48MM BORE SCREW-ON HINGES +30 Overlay Hinge 125 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA Overlay Nexis & Impresso 95 Snap-On +45 Corner & Soft-Close Absorbers 3-dimensional adjustment with suitable base plate Soft-close compatible For 45 positive angle corner cabinets Corner Angle Download a Grass Nexis catalog at Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 45-48MM BORE IMPRESSO TOOL-LESS HINGES +45 Overlay Hinge 125 EA GRA MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) +45 Overlay Hinge 125 EA GRA MM BORE SCREW-ON HINGES +45 Overlay Hinge 125 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES Qty Item # Less Full Complete Soft Close Absorber for Nexis 125 EA GRA Soft Close Adapter for Impresso (Need Damper) 125 EA GRA Soft Close Damper for Impresso Adapter (Need Adapter) 125 EA GRA H-24 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

25 GRASS NEXIS SNAP-ON 95 OPENING NEGATIVE ANGLE HINGES H Nexis 125 Snap-On -14 Corner & Soft Close Absorbers 3-dimensional adjustment with suitable base plate Soft-close compatible For 14 negative angle corner cabinets GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f Overlay Download a Grass Nexis catalog at Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 48MM BORE SCREW-ON HINGES -14 Overlay Hinge 125 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES SOFT-CLOSE # Complete Soft Close Absorber for Nexis 125 EA GRA Nexis 125 Snap-On -45 Corner & Soft Close Absorbers 3-dimensional adjustment with suitable base plate Soft-close compatible For 45 negative angle corner cabinets Half Overlay Note: Use a POZidrive screwdriver for hinge adjustment Fastening Screws: #6 x 5/8" FHP or #6 x 1/2" FHP Baseplates - pages H-26 & H-27 Hinge Arm & Cup Cover Caps - page H-30 Description Qty SELF-CLOSE # Less Full 45MM BORE DOWELED HINGES (BLUM & SALICE PATTERN) -45 Overlay Hinge 125 EA GRA SOFT-CLOSE ABSORBERS FOR TOOL-LESS MOUNTING TO HINGES SOFT-CLOSE # Complete Soft Close Absorber for Nexis 125 EA GRA PEKIN, IL p f A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-25

26 H GRASS NEXIS AND IMPRESSO SNAP-ON BASEPLATES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband Economy One-Piece Stamped Steel Plate with Slotted Hole Height Adjustment Wood Screw Attachment Item # Description Unit Qty Less Full GRA mm Height Adjustable Plate Wood Screw Attach. PC 250 GRA mm Height Adjustable Plate Wood Screw Attach. PC 250 GRA mm Height Adjustable Plate Wood Screw Attach. PC 250 Economy One-Piece Stamped Steel Plate with Slotted Hole Height Adjustment Pre-Attached Euro Screws Item # Description Unit Qty Less GRA mm Height Adjust. Plate W/ Pre-Attached Euro Screws PC 250 GRA mm Height Adjust. Plate W- Pre-Attached Euro Screws PC 250 GRA mm Height Adjust. Plate W / Pre-Attached Euro Screws PC 250 Economy Two-Piece Stamped Steel Cam Height Adjustment Wood Screw Attachment Item # Description Unit Qty Less Full GRA mm Nickel Baseplate Screw-On PC 250 GRA mm Nickel Baseplate Screw-On PC 250 Economy Two-Piece Stamped Steel Cam Height Adjustment Pre-Attached Euro Screws Item # Description Unit Qty GRA mm Nickel Baseplate With Pre-Mounted Euro Screws PC 250 GRA mm Nickel Baseplate With Pre-Mounted Euro Screws PC 250 Two-Piece Cam Height and Cam Depth Adjustment Wood Screw Attachment Item # Description Unit Qty Less GRA mm Cam Height & Depth Adjustment Wood Screw Attach. PC 250 GRA mm Cam Height & Depth Adjustment Wood Screw Attach. PC 250 GRA mm Cam Height & Depth Adjustment Wood Screw Attach. PC 250 GRA mm Cam Height & Depth Adjustment Wood Screw Attach. PC 250 Two-Piece Cam Height and Cam Depth Adjustment with Pre-Attached Euro Screws Item # Description Unit Qty GRA mm Cam Height & Depth Adjust. W/ Pre-Attached Euro Screws PC 250 GRA mm Cam Height & Depth Adjust. W/ Pre-Attached Euro Screws PC 250 GRA mm Cam Height & Depth Adjust. W/ Pre-Attached Euro Screws PC 250 GRA mm Cam Height & Depth Adjust. W/P re-attached Euro Screws PC 250 GRA mm Cam Height & Depth Adjust. W /Pre-Attached Euro Screws PC 250 Download a Grass Nexis catalog at Less Less Full Full Full Full H-26 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

27 GREEN BAY p f SUN PRAIRIE p f GRASS NEXIS AND IMPRESSO SNAP-ON BASEPLATES Two-Piece Cam Height and Cam Depth Adjustment Wood Screw Attachment with Three Point Mounting Item # Description Unit Qty Less GRA mm Cam Height & Depth Adjustment Wood Screw Attach. PC 250 GRA mm Cam Height & Depth Adjustment Wood Screw Attach. PC 250 GRA mm Cam Height & Depth Adjustment Wood Screw Attach. PC 250 GRA mm Cam Height & Depth Adjustment Wood Screw Attach. PC 250 Two-Piece Cam Height and Cam Depth Adjustment with Pre-Attached Euro Screws with Three Point Mounting The third mounting hole provides extra strength when securing the plate to the cabinet Item # Description Unit Qty GRA mm Nickel Baseplate With Pre-Mounted Euro Screws PC 250 GRA mm Nickel Baseplate With Pre-Mounted Euro Screws PC 250 GRA mm Nickel Baseplate With Pre-Mounted Euro Screws PC 250 GRA mm Nickel Baseplate With Pre-Mounted Euro Screws PC 250 Face Frame Adapter Plates for Nexis & Impresso Economy One-Piece Diecast Plate with Slotted Hole Height Adjustment Wood Screw Attachment Item # Description Unit Qty GRA mm Economy One-Piece Face Frame Adapter Plate Wood Screw Attach. PC 250 GRA mm Economy One-Piece Face Frame Adapter Plate Wood Screw Attach. PC 250 Two-Piece Cam Height and Cam Depth Adjustment Wood Screw Attachment Item # Description Unit Qty Less GRA mm Face-Frame Adapter Plate Wood Screw Attach. PC 250 GRA mm Face-Frame Adapter Plate Wood Screw Attach. PC 250 Two-Piece Cam Height and Cam Depth Adjustment with Pre-Attached Wood Screws Item # Description Unit Qty GRA mm Height Adjust. Plate W/ Pre-Attached Wood Screws PC 250 GRA mm Height Adjust. Plate W/ Pre-Attached Wood Screws PC 250 GRA mm Height Adjust. Plate W/ Pre-Attached Wood Screws PC 250 Inset Application Two-Piece Base Plate with Height Adjustment Via Screw Wood Screw Attachment Item # Description Unit Qty GRA mm Inset Face-Frame Adapter Plate Wood Screw Attach. PC 250 Note: Use with 110 and 125 half overlay hinges Download a Grass Nexis catalog at WEST SALEM p f PEKIN, IL p f Less Less Less Less Full Full Full Full Full Full A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-27

28 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband H-28 GRASS SOFT-CLOSE MECHANISMS & HINGE ACCESSORIES Soft-Close for Nexis or Impresso Allows the doors to glide into closed position Tool-free mounting to 42mm and 45mm pattern cups. Use 1 closer for doors up to 36" tall or 11 pounds & additional closers for taller or heavier doors Prevents slamming of door and adds safety Adjustable closing force to accommodate different size doors Zinc die cast with bright nickel finish Sold Bulk without hinge arm cover caps or Polybagged Kits with hinge arm cover caps Note: Use with 110 and 125 half overlay hinges Soft-Close for Nexis Item # Description Unit Qty GRA Soft-Close Mechanism for all Nexis Except 170 PC 125 GRA Soft-Close Mechanism Kit* for all Nexis Except 170 PC 125 GRA Soft-Close Mechanism for Use With 170 Full And Half Overlay PC 125 Soft-Close for Impresso Sold Bulk by the piece or Polybagged in Kits with hinge cover caps Item # Description Unit Qty GRA Soft-Close Adapter Body for all Impresso Except 170 PC 125 GRA Soft-Close Damper for all Impresso Except 170 PC 125 GRA Soft-Close Mechanism Kit* for all Impresso Except 170 PC 125 GRA Soft-Close Mechanism for Use With 170 Full and Half Overlay PC 125 You need one adapter body and one damper to create the closing mechanism Baseplate Template MILWAUKEE p f Knurled screw adjusts closing force Item # Description Unit Qty GRA Baseplate Template - White EA 1 Hinge Arm and Hinge Cup Flange Cover Caps Provides a finished look for hinge arms or hinge cup flanges Available Steel-Nickel Plated or Black Plastic Download a Grass Nexis catalog at MINNESOTA p f Full TRAVERSE CITY, MI p f Kit Less Use with 170 Less Used to drill pilot holes for straight or wing baseplates Arm Cap Item # Description Unit Qty Less Full HINGE ARM COVER CAPS GRA Black Plastic for Full Overlay EA 1,000 GRA Black Plastic for Half Overlay EA 1,000 HINGE CUP FLANGE COVER CAP - FITS 95, 105, 110, 125, NEG. 45, DIAGONAL CORNER & BLIND CORNER HINGES GRA Plain steel cover Cap for hinge cup flange EA 125 Full Full ST LOUIS, MO p f Cup Cover Cap

29 GRASS SOFT-CLOSE MECHANISMS AND PIE-CUT CORNER HINGE Grass Unisoft Soft-Close for Doors Works on face frame cabinets on all door overlays Works on frameless cabinets on full overlay doors Blends in well with hinge finish Mounts independently from the hinge in the upper corner of the cabinet Non-handed with low profile design Manually adjustable for full control of closing speed Brushed nickel polymer housing Grass Unisoft Important: Use a 65 angle for best mounting results. Pilot drill 2.3 mm [Ø3/32"J and 1/4" deep for a #6 x 3/4" Pan head screw recommended. Mount in upper corner on hinge side. Mounting Item # Description Unit Qty GRASS UNISOFT SOFT-CLOSE GRA Unisoft Adapter - Bulk PC 500 GRA Unisoft Adapter - Polybag with Screw PC 125 RECOMMENDED FASTENER QUI6109 #6 x 3/4" Phillips Pan Head Zinc Screws, of 1000 CTN 1 Grass 975VZ Series Pie Cut Corner Hinge Shallow profile does not interfere with lazy susans Same drilling pattern on both of the doors Height adjustable Sturdy all zinc die cast Polybag contains: 2 hinges, 1 magnetic catch, 1 strike plate, and instructions Cup Drilling Depth: 11.3mm (7/16") Maximum Door Thickness: 15mm (5/8") 25mm (1") overall cabinet opening 305mm - reveal 3mm =302mm - 2mm gap for bumper pad 2mm =300mm - door thickness 19mm =281mm - 1mm gap between doors 1mm - door size 280mm Item # Description Unit Qty Full GRA VZ Pie-Cut Corner Hinge PR 1 Grass Unisoft Less Full A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-29

30 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS TEC OPENING FACE MOUNT CABINET HINGES TEC Soft-Close and Self-Close Face Mount Face Mount for Overlays 1-7/16" & Greater Available in Soft-Close & Self-Close One piece hinge and baseplate combination Shallow Cup Depth - 7/16" Slotted Height Adjustment Cam Side Adjustment Soft-Close damper is mounted in the hinge cup Adjustment switch on Soft-Close to regulate closing force 85 angle reduction clip available to fit all hinges 20 [25/32 ] 2.5 [3/32 ] Ø35 [1 3/8 ] 4.9 [3/16 ] Door Thickness Min. 11 [7/16 ] Grass Pattern Overlay 37 [1 7/16 ] Min. 11 [7/16 ] 42 [1 21/32 ] Ø8 [5/16 ] 2.5 [3/32 ] 20 [13/16 ] 20 [25/32 ] 2.5 [3/32 ] Ø35 [1 3/8 ] Hinge Cup Screws: #6 x 5/8" FHP; #6 x 1/2" FHP Baseplate Mounting Screw: #10 x 3/4" RHP Item # Qty SOFT-CLOSE Less Full SELF-CLOSE Less Full 42MM BORE DOWELED FACE MOUNT HINGES (GRASS PATTERN) 1-7/16" Minimum Overlay 300 EA GRA02293A15 GRA MM BORE DOWELED FACE MOUNT HINGES (BLUM & SALICE PATTERN) 1-7/16" Minimum Overlay 300 EA GRA02294A15 GRA MM BORE SCREW-ON FACE MOUNT HINGES 1-7/16" Minimum Overlay 300 EA GRA02295A15 GRA TEC 85 Angle Reduction Clip Reduces opening angle to 85 Use for TEC 861, 863 & 864 Blum / Salice Pattern 9.5 [3/8 ] Item # Description Unit Qty Less Full GRA Angle Reduction Clip PC 100 TEC Hand Insertion Tool Used for hand insertion of Tec Soft-Close hinges Patent Pending 45 [1 25/32 ] Ø8 [5/16 ] Item # Description Unit Qty Unit Price GRA Hand Insertion Tool PC 1 40 [1 1/2 ] Overall Dimensions 39 [1 9/16 ] 57 [2 1/4 ] ipmatic 1. Side Adjustment +/- 1.5mm (1/16") Rotate cam adjustment screw 2. Height Adjustment +/- 2mm (3/32") Loosen screw, align door, tighten screw 3. Soft-Close Tension Light, Medium & Strong setting H-30 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

31 GRASS TEC OPENING FACE FRAME CABINET HINGES TEC Soft-Close and Self-Close Face Frame Available Screw-On and Doweled in 42 & 45mm Patterns One piece hinge and baseplate combination Wrap around or side mount baseplates Shallow Cup Depth - 7/16" Cam Side and Depth Adjustment Slotted Height Adjustment Available Soft-Close with 3 adjustable closing levels or Self-Close Adjustable Soft-Close Damper is integrated into the hinge cup TEC Soft-close hinges are more convenient than ever. Each hinge is adjustable to fit any door, and close to any pressure. 1 Side Adjustment Rotate cam adjustment screw. 2 Height Adjustment Loosen screw, align door, tighten screw. 3 Depth Adjustment Rotate cam screw. 4 Soft-close Tension...Light, Medium and Strong settings. Tec 864 VS8 Tec 864 VS8-45 TEC864 Soft-Close TEC864 Self-Close Hinge Cup Screws: #6 x 5/8" FHP; #6 x 1/2" FHP Baseplate Mounting Screw: #10 x 3/4" RHP Description Qty SOFT-CLOSE # Less Full SELF-CLOSE # Less Full 42MM BORE DOWELED WRAP AROUND HINGES (GRASS PATTERN) 1/4" Overlay Wrap 300 EA GRA02788A15 GRA /16" Overlay Wrap 300 EA GRA02809A15 N/A 1/2" Overlay Wrap 300 EA GRA02824A15 GRA /4" Overlay Wrap 300 EA GRA02825A15 GRA " Overlay Wrap 300 EA GRA02834A15 GRA /4" Overlay Wrap 300 EA GRA02836A15 GRA /8" Overlay Wrap 300 EA N/A GRA /2" Overlay Wrap 300 EA GRA02839A15 GRA MM BORE DOWELED SIDE MOUNT HINGES (GRASS PATTERN) 1/2" Overlay Side Mount 300 EA GRA02749A15 GRA /4" Overlay Side Mount 300 EA GRA02838A15 GRA MM BORE DOWELED WRAP AROUND HINGES (BLUM & SALICE PATTERN) 1/4" Overlay Wrap 300 EA GRA02791A15 GRA /16" Overlay Wrap 300 EA GRA02858A15 GRA /2" Overlay Wrap 300 EA GRA02870A15 GRA /8" Overlay Wrap 300 EA GRA01995A15 N/A 3/4" Overlay Wrap 300 EA GRA02875A15 GRA " Overlay Wrap 300 EA GRA02745A15 GRA /4" Overlay Wrap 300 EA GRA02910A15 GRA /16" Overlay Wrap 300 EA GRA02198A15 N/A 1-3/8" Overlay Wrap 300 EA GRA02782A15 GRA /2" Overlay Wrap 300 EA GRA02805A15 GRA MM BORE DOWELED SIDE MOUNT HINGES (BLUM & SALICE PATTERN) 1/2" Overlay Side Mount 300 EA GRA02750A15 GRA /8" Overlay Side Mount 300 EA N/A GRA " Overlay Side Mount 300 EA N/A GRA /4" Overlay Side Mount 300 EA GRA02780A15 GRA MM BORE SCREW-ON WRAP AROUND HINGES 1/4" Overlay Wrap 300 EA GRA04429A15 GRA /16" Overlay Wrap 300 EA GRA02670A15 N/A 1/2" Overlay Wrap 300 EA GRA04431A15 GRA /4" Overlay Wrap 300 EA GRA04432A15 GRA " Overlay Wrap 300 EA GRA04441A15 GRA /4" Overlay Wrap 300 EA GRA04547A15 GRA /16" Overlay Wrap 300 EA GRA02176A15 N/A 1-3/8" Overlay Wrap 300 EA GRA04548A15 GRA /2" Overlay Wrap 300 EA GRA04549A15 GRA A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-31

32 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS 861 SERIES FACE FRAME HINGES 108 OPENING 108 Opening Face Frame Hinge (One Piece) Tec 861 Series Available in standard Grass 42mm pattern and Blum 45mm pattern One piece hinge and baseplate combination (non-detachable) Locating tabs on Wood Face Frame Hinge for easy mounting Wrap Around Baseplate on MDF Frame Hinge to prevent splitting Height adjustment in elongated screw hole Competitively priced All metal construction, nickel finish Cup Drilling Depth: 10.5mm (27/64") Cup Drilling Distance: 2.5mm (3/32") to 3.5mm (9/64") depending on application Maximum Door Thickness: 13mm (1/2") to 19mm (3/4") door Minimum Reveal (measured in millimeters) Door thickness Tec Tec 861 with wrap-around baseplate Ø 8/depth û face frame door overlay Tec 861 VS reveal 2.5 cup drilling distance cup drilling distance door Ø 8/depth 10.5 Tec 861 with side-mount baseplate 108û face frame door overlay Tec 861 VS Opening Face Frame Hine (One Piece) Tec 861 Series reveal 3.5 cup drilling distance cup drilling distance Hinge Adjustment Wood Face Frame Hinge MDF Face Frame Hinge Side Adjustment...Achieved with use of 1.5mm (1/16") spacer Height Adjustment...+/-2mm Loosen screw, align door, tighten screw Hinge fastening screw: #6 x 5/8" FHP, #6 x 1/2" FHP Baseplate fastening screw: #10 x 3/4" RHP 2 Shown with spacer GRA00047 Item # Description Unit Qty Less Full 42MM BORE DOWELED SIDE MOUNT HINGES (GRASS PATTERN) GRA /16" Overlay Side-Mount PC MM BORE DOWELED WRAP AROUND HINGES (GRASS PATTERN) GRA /2" Overlay Doweled Wrap-Around PC 400 GRA /16" Overlay Doweled Wrap-Around PC MM BORE DOWELED WRAP AROUND HINGES (GRASS PATTERN) FOR MDF FACE FRAME GRA /2" Overlay Doweled Wrap-Around for 5/8" FF PC MM BORE DOWELED WRAP AROUND HINGES (BLUM & SALICE PATTERN) GRA /16" Overlay Doweled Wrap-Around PC 400 GRA /2" Overlay Doweled Wrap-Around PC 400 GRA /16" Overlay Doweled Wrap-Around 45mm Blum Pattern PC 400 ACCESSORY ITEMS GRA * 1.3mm Plastic Spacer PC 100 GRA Angle Reduction Clip (see page H-30) PC 100 * Spacer is not for use with MDF Face Frame Hinge 1 H-32 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

33 GRASS 872 SERIES FACE FRAME HINGES 110 OPENING H 110 Opening Face Frame Hinge (Two Piece) Tec 872 Series 1/2" overlay achievable on profile door 3-way adjustability All-metal hinge and baseplate 45mm dowel spread Tight gap between door and frame Minimal protrusion back into cabinet Cup Drilling Depth:11.5mm (29/64") Cup Drilling Distance:3.0mm (1/8") to 7.0mm (9/32") Maximum Door Thickness:19mm (3/4") using all available side adjustment TEC /4" Max. Overlay Overlay Drill Distance Cup Center CC 15mm (19 32") 3mm (1 8") 20.5mm (13 16") 16mm (5 8") 4mm (5 32") 21.5mm (27 32") 17mm (21 32") 5mm (3 16") 22.5mm (7 8") 18mm (11 16") 6mm (1 4") 23.5mm (15 16") 19mm (3 4") 7mm (9 32") 24.5mm (31 32") TEC /2" Max. Overlay Overlay Drill Distance Cup Center CC 11mm (7 16") 3mm (1 8") 20.5mm (13 16") 12mm (15 32") 4mm (5 32") 21.5mm (27 32") 13mm (1 2") 5mm (3 16") 22.5mm (7 8") 14mm (9 16") 6mm (1 4") 23.5mm (15 16") 15mm (19 32") 7mm (9 32") 24.5mm (31 32") 1 Side Adjustment...+/-2mm 2 Depth Adjustment...+/-2mm 3 Height Adjustment...+/-2mm Note: Use a POZidrive screwdriver for hinge adjustment. Fastening Screws: #6 x 5/8" FHP, #6 x 1/2" FHP Baseplate Screws: #6 x 5/8" FHP, #6 x 3/4" FHP Hinge Adjustments 1/2" Overlay 11/16" Overlay Maximum Door Thickness (Achievable on profile door) Maximum Door Overlay: 19mm (3/4") using Maximum Door Overlay: 19mm (3/4") using Maximum Door Overlay: 15mm (9/16") using all available side adjustment all available side adjustment all available side adjustment. 1/2" OVERLAY 11/16" OVERLAY 3/4" OVERLAY Item # Description Unit Per GRA Screw-On Blum Pattern VS-45 Hinge Cup Only PC 500 GRA Doweled 110 Blum Pattern 872 VS8-45 Hinge Cup Only PC 500 GRA Baseplate only Side Mount 11/16" Overlay PC 500 GRA Baseplate only Side Mount 1/2" Overlay PC 500 Less Full A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-33

34 H GRASS HINGE INSTALLATION ACCESSORIES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband Grass PoziDrive Screwdriver Used to tighten the adjustment screws on Grass Item # Description Unit Price GRA Grass PoziDrive Screwdriver Grass Pozi Drive Euro Screws Used for drawer slides and hinges in European style cabinetry Deep threads for maximum holding in MDF & particleboard 5mm nickel plated #2 Pozi Drive, Flat Head, Euro Screws Size Finish Item # Unit Qty Less Full 5mm x 7.5mm Pozi Drive Nickel GRA PC 500 5mm x 13mm Pozi Drive Nickel GRA PC 500 5mm x 18mm Pozi Drive Nickel GRA PC 500 Grass Round Head Phillips Hinge Screws Great for fastening Euro Style face frame hinges to the face frame #2 Phillips Drive, Round Head Size Finish 500 Pack Unit Qty Less Full 10 x 3/4" Nickel GRA PC 500 Grass Flat Head Phillips Hardware Screws Used for attaching hardware to wood, MDF or particleboard Phillips drive with flat head & deep thread design #2 Phillips Drive Flat Head Deep Thread Size Finish 500 Pack Unit Qty Less Full 6 x 5/8" Nickel GRA PC x 3/4" Nickel GRA PC x 1" Nickel GRA PC 500 Grass Bumper Pads Pressure sensitive adhesive Used to cushion & quiet cabinet doors and drawers and under glass tabletops and shelves Airsoft Bumpers are the new, softer durometer, quieter bumper Sold by the each in full card multiples Item # Description Unit Per Card Qty Less /Card Each Full /Card Each GRA Clear Bumper 1/8" x 7/16" EA GRA Clear Bumper 1/16" x 7/16" EA GRA Airsoft Bumper Clear 3/32" x 3/8" EA GRA Airsoft Bumper Clear 3/16" x 1/2" EA GRA Hexagonal Bumper Tan 1/8" x 7/16" EA Unigrass H-950 Clear Door Stop Item # Description Unit Qty Less Full GRA UniGrass Door Stop PC 500 Hinge Cover Caps and Dowels Item # Description Unit Qty Less Full GRA mm Cover Cap, White PC 100 GRA mm Cover Cap, Brown PC 100 GRA mm Dowel for VS Hinge Cup PC 500 GRA mm Dowel for VZ Hinge Cup EA 1 H-34 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

35 Grass Drilling and Insertion Machinery for Bore depth automatically adjusts to material thickness Accurate fence is easily adjusted Chip removal by air Easy, fast and efficient operation Easy maintenance 45mm boring pattern Contact your Amerhart or Grass Rep for more information Grass Hinge Insertion Dies Item Number Description Unit Price GRAF Tiomos Insertion Die, Universal 110, 120, 160 GRAF Tiomos Insertion Die, Ecopress GRA Nexis Insertion Die, Ecopress GRA Nexis Insertion Die, Ecopress 170 GRA92617 TEC Universal Insertion Die Soft/Self Close Grass Boring Bits Item # Right Hand Item # Left Hand Description Unit Price GRA GRA mm Carbide N/A GRA mm Carbide GRA N/A 35mm Carbide GRA Bit Set (1) 35mm Bit, (2) 8mm Bits LH GRA GRA mm Countersink for 6036 GRA N/A 6036 Router Bit Carbide Tipped Brad Point Boring Bits Specifically designed for use in automatic boring machines Right-Hand Item Left-Hand Item # Bit Diameter Item Price 57MM LONG, 10MM X 27MM SHANK AMN AMN mm AMN AMN mm AMN AMN mm AMN N/A 1/4 AMN AMN mm N/A AMN mm AMN AMN /8 AMN AMN mm AMN AMN /2 70MM LONG, 10MM X 30MM SHANK AMN AMN mm AMN AMN /4 AMN AMN mm AMN AMN mm AMN AMN mm AMN N/A 8.2mm AMN AMN /8 AMN AMN mm AMN N/A 15mm Carbide Tipped Hinge Boring Bits For boring machines (10mm shank) and drill presses (3/8" shank) 57mm Long, 10mm Shank, 2-Wing with Spurs Right Hand Item Bit Diameter Item Price AMN mm AMN mm AMN mm AMN mm AMN mm GREEN BAY p f SUN PRAIRIE p f GRASS BORING MACHINES & ACCESSORIES WEST SALEM p f d D PEKIN, IL p f GRAF B L d D L d D L1 L A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-35

36 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GRASS 8000 SERIES INSTITUTIONAL BARREL HINGES Grass 8000 Series Grade 1 Institutional Barrel are zinc die-cast construction for extreme durability Recommended for side panel thickness of 3/4" (19mm) 45mm center to center boring pattern. Screw-on cup available Tool less assembly of the hinge arm to the hinge cup Side-to-side adjustment of 1/16" (-2mm) Height adjustment of 1/16" (+/-2mm) Designed for frameless cabinet construction Meets ANSI/BHMA A Grade 1 requirements Available in Nickel Opening angles: Full overlay = 270 degree Half overlay = 230 degree Common panel = 180 degree Note: Each component is ordered separately Choose screw-on or doweled hinge cup, (one cup fits all 3 arms) Choose hinge arm based on application (cover cap included) Order 2 special euro screws per hinge for hinge arm mounting Hinge Cup Hinge Arm - Common Panel Hinge Arm - Full Overlay Hinge Arm - Half Overlay Item # Description Unit Qty Less Full GRAF Hinge Cup, Doweled, Nickel PC 200 GRAF Hinge Cup, Screw-On, Nickel PC 200 GRAF Hinge Arm, Full Overlay, Nickel PC 100 GRAF Hinge Arm, Half Overlay, Nickel PC 100 GRAF Hinge Arm, Common Panel, Nickel PC 100 GRAB Hinge Arm Mounting Euro-Screw 6.3 x 13.5mm PC 100 Full Overlay Half Overlay Common Panel Hinge Arm Mounting Screw H-36 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

37 Rockford Process Control 374, 375, mm Overlay Meets ANSI/BHMA Grade #1 2-3/4" Five Knuckle Hinge.095 Steel Hospital Tips Designed for 32mm hole system 844 5/8" Overlay Hinge 2-3/4" Five Knuckle Hinge.095 Steel Hospital Tips For 1-1/16" doors 848, 849 3/8" Overlay 2-3/4" Five Knuckle Hinge.095 Steel Hospital Tips Adjustable Screw Holes This hinge can be used back to back on a common 3/4" panel Hole patterns are such that screws will not interfere if hinges are mounted back to back /2" Flush Hinge 2-1/2" Five Knuckle Hinge.083 Steel Hospital Tips /4" Flush Hinge Grade #1 2-3/4" Five Knuckle Flush Hinge.095 Steel Hospital Tips Screws included with all Rockford ROC210726D Dull Chrome 13/16" Door Flush EA 100 GREEN BAY SUN PRAIRIE WEST SALEM p p p f f f B B Side Panel B B B Door Door C Door 5 - KNUCKLE INSTITUTIONAL HINGES C D C C A D Side Panel A Side Panel D A Panel A Side Panel A Item # Description Unit Qty Less Full ROC3741D Black 3/4" Door 3/4" Side 18mm EA 100 ROC37426D Dull Chrome 3/4" Door 3/4" Side 18mm EA 100 ROC374P28B Powder Chrome 3/4" Door 3/4" Side 18mm EA 100 ROC37526D Dull Chrome 13/16" Door 13/16" Side 20mm EA 100 ROC3761D Black 13/16" Door 3/4" Side 18mm EA 100 ROC37626D Dull Chrome 13/16" Door 3/4" Side 18mm EA 100 ROC376P28B Powder Chrome 13/16" Door 3/4" Side 18mm EA 100 ROC376S000 Stainless Steel 13/16" Door 3/4" Side 18mm EA 100 ROC84426D Dull Chrome 1" Door 19/32" Overlay EA 100 ROC84826D Dull Chrome 3/4" Door 11/32" Overlay EA 100 ROC84926D Dull Chrome 13/16" Door 11/32" Overlay EA 100 ROC8601D Black 3/4" Door Inset EA 100 ROC86026D Dull Chrome 3/4" Door Inset EA 100 C D D PEKIN, IL p f Item# A B C D 374 3/4" 3/4" 23/32" 15/32" 19mm 19mm 18.3mm 11.9mm /16" 13/16" 25/32" 17/32" 20.6mm 20.6mm 19.8mm 13.5mm 376 3/4" 13/16" 23/32" 15/32" 19mm 20.6mm 18.3mm 11.9mm Item# A B C D 844 5/8" 1-1/16" 19/32" 11/32" 16mm 27mm 15mm 8.7mm Item# A B C D 848 3/8" 3/4" 11/32" 1/8" 9.5mm 19mm 8.7mm 3.2mm 849 3/8" 13/16" 11/32" 1/8" 9.5mm 20.6mm 8.7mm 3.2mm Item# A B C D 860 N/A 3/4" 7/32" 1-59/64" N/A 19mm 5.6mm 48.8mm Item# A B C D 2107 N/A 13/16" 1/4" 2-3/16" N/A 20.5mm 6.4mm 55.6mm Finish Codes 1D = Black P28 = Powder Chrome 26D = Dull Chrome SS = Stainless Steel Available More Institutional - Next Page A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index H-37

38 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband 5 - KNUCKLE INSTITUTIONAL HINGES & FLAP HINGES 74 & 76 Series 32mm Overlay Quality Hinge at a Value Price Exceeds ANSI/BHMA Grade 1 requirements 2-3/4" Five Knuckle 270 Opening Angle Durable.090" Steel Hospital Tips & corners for safety 32mm centers with 37mm setback Non-removable Knurled Pin Use #8 or Euro Screws (Sold Separately) Side Panel Grass 90 Flap Hinge 90 opening angle for flap thickness of 14mm to 20mm 3-Dimensional adjustment / diecast nickel 35mm hinge is supplied unassembled Identical drilling pattern for base & flap door Used with Soft-Down Stays in a drop flap application (see next page) Item# A B C D Side Panel 74 3/4" (19mm) 76 3/4" (19mm) Item # Description Unit Qty Less Full ROC74BL Black Powder Coat, 3/4" Door, 3/4" Side EA 100 ROC74CPC Chrome Powder Coat, 3/4" Door, 3/4" Side EA 100 ROC7426D Dull Chrome Plated, 3/4" Door, 3/4" Side EA 100 ROC76BL Black Powder Coat, 13/16" Door, 3/4" Side EA 100 ROC76CPC Chrome Powder Coat, 13/16" Door, 3/4" Side EA 100 ROC7626D Dull Chrome Plated, 13/16" Door, 3/4" Side EA 100 ROC76SS Stainless Steel, 13/16" Door, 3/4" Side EA 100 Note: Screws must be ordered separately, see below Screws for 74 & 76 Series 32mm Overlay Item # Description Unit Qty Price QUI127 #8 x 5/8" Phillips Flat Head Zinc Quick$crews CTN 14,000 QUI5789 #8 x 5/8" Phillips Flat Head Zinc Quick$crews CTN 1,000 QUI9017 #8 x 5/8" Phillips Flat Head Zinc W/Auger Point CTN 14,000 QUI9178 #8 x 5/8" Phillips Flat Head Zinc W/Auger Point CTN 1,000 ROCBLACKSCREWS #8 x 5/8" Phillips Flat Head Sheet Metal (Bag 900) BAG 900 ROCZINCSCREWS #8 x 5/8" Phillips Flat Head Sheet Metal (Bag 900) BAG 900 ROCSTAINLESSSCRE #8 x 5/8" Phillips Flat Head Sheet Metal (Bag 900) BAG 900 Item # Description Unit Qty Less Full GRA Flap Door Hinge PC 100 B C D A Door Thickness 3/4" (19mm) 13/16" (20.6mm) Hinge Overlay 23/32" (18.3mm) 23/32" (18.3mm) Door Overlay 15/32" (11.9mm) 15/32" (11.9mm) Flap Thickness (DT) Gap min. (R) H-38 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

39 Sugatsune Soft-Down Stays Material: Plastic, Steel, Zinc Alloy Finish: Nickel Supplied with screws (3.5 x 14) SDS-C100 (with catch) is designed to securely latch a flap Recommended door thickness: 20mm (25/32") SDSC100 SDS210 C' Side board C B' B A' A Hinge center (Single knuckle hinge) For Upward-Opening flap door with concealed, Piano or butt hinges Material: Plastic, Steel, Zinc Alloy Supplied with screws (3.5 x 14) SDS-C301 is designed to hold the door in the closed and the opened positions Non-handed. Recommended door thickness 20mm (25/32") SDSC301 Flap 12 4 Door edge (Drop hinge) φ9 LID SUPPORTS Torque Calculation: Torque = Door Height x 1/2 x Door Weight SDSC100/210 Per Piece: kg cm (30-43 lbs inch) Per pair: kg cm (60-86 lbs inch) B 20 (φ28.28) For Right side board Torque Calculation: Torque = Door Height x 1/2 x Door Weight Per Piece: kg cm (35-60 lbs inch) Per Piece: kg cm ( lbs inch) Item # Description Unit Qty Less Full SUGSDSC100WHT 90 Opening Drop Down Lid Stay EA 20 SUGSDS210WHT 105 Opening Swing Up Lid Stay EA 20 SUGSDSC301WHT 90 Upward Opening Lid Stay EA 20 L DS 20 R L US R 45 φ38 22 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-39

40 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband SUGATSUNE ELAN CABINET DOOR LIFTS HBF-Elan Bi-Fold Assist Stay Lapcon stay for BI-FOLD SWING LIFT-UP DOORS Horizontal Bi-fold lift-assist stay Assists in opening and closing doors in a smooth motion Easy to install, by using paper template and multiple adjustments. Anodized and Light Gray Recommended Door Size and Weight: Width: maximum 1200mm (47-1/4") Height: mm (12-9/16" to 14-9/16") Weight: 2.5kg 6.5kg/door (5.5 lbs to 14.3 lbs) For more information go to Type Elan in the search box. Item # Description Door Weight(kg) Unit Qty Less Full SUGHBFELANLL Bi-Fold Lift Assist Mechanism kg (5.5 to 7.28 lbs.) SET 5 SUGHBFELANML Bi-Fold Lift Assist Mechanism kg (7.28 to 9.04 lbs.) SET 5 SUGHBFELANMM Bi-Fold Lift Assist Mechanism kg (9.04 to 10.8 lbs.) SET 5 SUGHBFELANHM Bi-Fold Lift Assist Mechanism kg (10.8 to12.57 lbs.) SET 5 SUGHBFELANHH Bi-Fold Lift Assist Mechanism kg (12.57 to lbs.) SET 5 H-40 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

41 SLU-Elan Swing Lift-Up Stay Lapcon stay for SWING LIFT-UP DOORS Lift-assist for extra light opening Door stays in any desired position Soft and silent closing at the end Simple installation by mounting guide plate and sliding in the main body No hinges required Light Gray in color Connecting bar required and sold separately. Optional bracket for face frame cabinets available Recommended Door Size and Weight: Maximum Width 1500mm (59-1/16") Door Height mm (15-3/8" 19-11/16") Door Weight Including Handle lbs Minimum Inside Height 360mm (14-3/16") For more information go to Type Elan in the search box. SUGATSUNE ELAN CABINET DOOR LIFTS Item # Description Door Weight(kg) Unit Qty Less Full SUGSLUELANS4 Swing Lift-Up Stay ( lbs) PR 5 SUGSLUELANL4 Swing Lift-Up Stay ( lbs) PR 5 SUGSLUELANM4 Swing Lift-Up Stay ( lbs) PR 5 SUGSLUELANH4 Swing Lift-Up Stay ( lbs) PR 5 SLU-Elan Connecting Bar Item # Width (mm) Inside Dimensions(mm) Unit Qty Less Full SUGELB (23-5/8") (21-7/8" /4") EA 5 SUGELB (35-1/2") (33-3/4" /8") EA 5 SUGELB (47-1/4" (45-1/2" /8") EA 5 SUGELB (59") (57-5/16" /4") EA 5 Please specify cabinet width when ordering. Bars can be cut to length. Face frame brackets for SLU Sold in pairs Item # Description Unit Qty Less Full SUGFFCBSLU SLU Face Frame Bracket PR 4 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-41

42 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband SUGATSUNE ELAN CABINET DOOR LIFTS EZS-Elan Easy Lift-Up Stay Lapcon stay for UPWARD-OPENING FLAP DOORS Door opens over the cabinet. (Space of 4-5/16" required over cabinet) Lift-assist mechanism for extra light opening. Door stays in any desired position. Damper equipped for soft and silent closing. Slim design and installed location maximizes space inside the cabinet. Simple installation by aligning body to edge of the door. No hinges or connecting bars needed. Door height adjustable. (Horizontal + or 1/16" Vertical + or- 1/16") Successfully passed 30,000 open/close private cycling tests. Steel, ABS Nickel & Light Gray Recommended Door Size and Weight: Width, Maximum 1200 mm (47-1/4") Height, mm (19-11/16 to 29-1/2")/Door Weight, kg (11 to 27.5 lbs)/door For more information go to: Type Elan in the search box. Door Weight Range Table (lbs) per pair Door Height EZS-ELAN-LL EZS-ELAN-ML EZS-ELAN-MM EZS-ELAN-HM EZS-ELAN-HH (inches) Min Max Min Max Min Max Min Max Min Max Lifting Power = Door Height (In.) x Door Weight (lbs) - 1). For Example: If door height is 24" & door weight is 16 lbs. : 24 x (16-1) = 360 (lbs-in.) or 1 pair of SUGEZSELANML Item # Description Lifting Power (lbs-in.) Unit Qty Less Full SUGEZSELANLL Lift Assist Mechanism Light Duty PR 5 SUGEZSELANML Lift Assist Mechanism Light/Medium Duty PR 5 SUGEZSELANMM Lift Assist Mechanism Medium Duty PR 5 SUGEZSELANHM Lift Assist Mechanism Medium/Heavy Duty PR 5 SUGEZSELANHH Lift Assist Mechanism Heavy Duty PR 5 H-42 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

43 SLS-Elan Easy Lift-Up Stay For Upward Opening Flap Door with concealed, piano, butt, drop hinges. Designed to provide effortless opening and hold door in closed and open position. Damper equipped for soft and silent close. Optional bracket for face frame cabinets available Single or pair use allows wide range of door sizes/weights. Handed left or right. Light Gray in color For more information go to: Type Elan in the search box. Door Weight Range Table (lbs) SUGATSUEN ELAN CABINET DOOR LIFTS Door Single use Pair Use Height M Type H-Type M-Type H-Type (inch) Min Max Min Max Min Max Min Max 12" " " " " " " " " " " " " " " " " Item # Description Torque per piece Unit Qty Less Full SUGSLSELANML Left - Medium Duty 55-75kg cm( lbs. in) EA 20 SUGSLSELANMR Right - Medium Duty 55-75kg cm (48-65 lbs. in) EA 20 SUGSLSELANHL Left - Heavy Duty kg cm (65-87 lbs. in) EA 20 SUGSLSELANHR Right - Heavy Duty kg cm (65-87 lbs. in) EA 20 SUGFFCBSLS Steel Face Frame Bracket Non-Handed (1 required per stay) EA 10 A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-43

44 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband SUGATSUNE ELAN CABINET DOOR LIFTS SLD-Elan Vertical Swing Down Mechanism Lapcon stay for SWING LIFT-UP DOORS Unique swing down mechanism will hold doors at the open position. Provides a lift-assist feature to help open/close the doors Sleek compact design. Easy installation. Adjustable arm mounting plate. Patented LAPCON technology provides a smooth and quiet motion. Successfully passed 30,000 open/close private cycle tests. Steel, ABS Nickel & Light Gray Recommended Door Size and Weight: Width, mm (23-5/8" 35-7/16") Height, mm (14-1/8" 15-3/4") Weight, 3-6 kg ( lbs) For more information go to Type Elan in the search box. Guide Bar Length Width( mm) Door type 600 (23-5/8") 900 (35-7/16") Solid Wood Door 535 (21-1/16") 835 (32-7/8") Frame Door 551(21-3/4") 851 (33-1/2") *SLUB-835 Guide Bar (835mm (32-7/8) included unless specified Item # Description Door Weight(kg) Unit Qty Less Full SUGSLD3 Swing-Down Mechanism 3-4 ( lbs.) SET 5 SUGSLD4 Swing-Down Mechanism 4-5 ( lbs.) SET 5 SUGSLD5 Swing-Down Mechanism 5-6 ( lbs.) SET 5 H-44 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

45 Marathon Knife Hinge Smooth, quiet, reliable, 180 opening hinge Vertical & Horizontal adjustments +/- 1/16" Partial wrap, 1/2" overlay, white Locating tabs allow quick frame positioning Outperforms KCMA Standards Partial Wrap Note: Door cuts should be made with 6" dado, 9/32" wide For 1/2" (12.7mm) Overlay Doors 5/8" to 3/4" (15.9 to 19.1) thick Item # Description Unit Qty Less Full AME2606BBCM 1/2" Overlay Knife Hinge PR 100 AME2606WCM 1/2" Overlay Knife Hinge PR 100 Not finding what you need, contact an Amerhart Representative. All Amerock hinges are available special order (minimums may apply). SELF-CLOSING KNIFE HINGES Finish Codes BB = Burnished Brass W = White A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-45

46 H SELF-CLOSING FACE MOUNT HINGES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband 3/8" Inset Item # Description Unit Qty Less Full AME3428ASBP 3/8" Inset Modern Hinge PR 25 AME3428BBBP 3/8" Inset Modern Hinge PR 25 AME3428FBBP 3/8" Inset Modern Hinge PR 25 AME3428GBBP 3/8" Inset Modern Hinge PR 25 AME3428G10BP 3/8" Inset Modern Hinge PR 25 AME3428ORBBP 3/8" Inset Modern Hinge PR 25 AME3428WNBP 3/8" Inset Modern Hinge PR 25 AME342826BP 3/8" Inset Modern Hinge PR 25 AME34283BP 3/8" Inset Modern Hinge PR 25 AME7128BKBP 3/8" Inset Modern Hinge PR 25 AME7128G10CM 3/8" Inset Modern Hinge PR 100 AME7128ORBCM 3/8" Inset Modern Hinge PR 100 AME7128WBP 3/8" Inset Modern Hinge PR 25 AME7128WIBP 3/8" Inset Modern Hinge PR 25 AME71283CM 3/8" Inset Modern Hinge PR 100 3/8" Inset Item # Description Unit Qty Less Full AME7328ACBP 3/8" Inset Carriage House Hinge PR 25 AME7328AEBP 3/8" Inset Carriage House Hinge PR 25 AME7328G9BP 3/8" Inset Carriage House Hinge PR 25 3/8" Inset Item # Description Unit Qty Less Full AME7628AEBP 3/8" Inset Modern Hinge PR 25 AME7628AECM 3/8" Inset Modern Hinge PR 100 AME7628BBBP 3/8" Inset Modern Hinge PR 25 AME7628BBCM 3/8" Inset Modern Hinge PR 100 AME762826BP 3/8" Inset Modern Hinge PR 25 3/8" Inset Item # Description Unit Qty Less Full AME7928AEBP 3/8" Inset Imperia Hinge PR 25 AME7928BBBP 3/8" Inset Imperia Hinge PR 25 AME7928G10BP 3/8" Inset Imperia Hinge PR 25 AME7928ORBBP 3/8" Inset Imperia Hinge PR 25 AME79283BP 3/8" Inset Imperia Hinge PR 25 AME792826BP 3/8" Inset Imperia Hinge PR 25 Reverse Bevel Finish Codes 3 = Bright Brass 26 = Polished Chrome AC = Antique Copper AE = Antique Brass AS = Antique Silver BB = Burnished Brass BK = Black FB = Flat Black GB = Gilded Bronze G9 = Sterling Nickel G10 = Satin Nickel ORB = Oil Rubbed Bronze W = White WN = Weathered Nickel WI = Wrought Iron Item # Description Unit Qty Less Full AME7630ACBP 30-Degree Rev. Bevel Modern Hinge PR 25 AME7630AEBP 30-Degree Rev. Bevel Modern Hinge PR 25 AME7630BBBP 30-Degree Rev. Bevel Modern Hinge PR 25 AME763026BP 30-Degree Rev. Bevel Modern Hinge PR 25 AME76303BP 30-Degree Rev. Bevel Modern Hinge PR H-46 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

47 Finish Codes 3 = Bright Brass, 14 = Nickel, 26 = Polished Chrome, AE = Antique Brass, AS = Antique Silver, BB = Burnished Brass, BK = Black, FB = Flat Black, GB = Gilded Bronze, G9 = Sterling Nickel, G10 = Satin Nickel, HBZ = Hammered Bronze, ORB = Oil Rubbed Bronze, R3 - Rustic Brass, W = White, WI = Wrought Iron, WN = Weathered Nickel Variable Overlay Item # Description Unit Qty Less Full AME3429ASBP Variable Overlay Modern Hinge PR 25 AME3429BBBP Variable Overlay Modern Hinge PR 25 AME3429FBBP Variable Overlay Modern Hinge PR 25 AME3429GBBP Variable Overlay Modern Hinge PR 25 AME3429G10BP Variable Overlay Modern Hinge PR 25 AME3429ORBBP Variable Overlay Modern Hinge PR 25 AME3429WBP Variable Overlay Modern Hinge PR 25 AME3429WNBP Variable Overlay Modern Hinge PR 25 AME342926BP Variable Overlay Modern Hinge PR 25 AME34293BP Variable Overlay Modern Hinge PR 25 AME7139BBCM Variable Overlay Modern Hinge PR 100 AME7139BKBP Variable Overlay Modern Hinge PR 25 AME7139G10CM Variable Overlay Modern Hinge PR 100 AME7139HBZBP Variable Overlay Modern Hinge PR 25 AME7139ORBCM Variable Overlay Modern Hinge PR 100 AME7139R3BP Variable Overlay Modern Hinge PR 25 AME7139WBP Variable Overlay Modern Hinge PR 25 AME7139WIBP Variable Overlay Modern Hinge PR 25 AME713914CM Variable Overlay Modern Hinge PR 100 AME71393CM Variable Overlay Modern Hinge PR 100 Variable Overlay Item # Description Unit Qty Less Full AME7329G9BP Variable Overlay Carriage House Hinge PR 25 AME7329G10BP Variable Overlay Carriage House Hinge PR 25 AME7329ORBBP Variable Overlay Carriage House Hinge PR 25 Variable Overlay Item # Description Unit Qty Less Full AME7629AEBP Variable Overlay Modern Hinge PR 25 AME7629BBBP Variable Overlay Modern Hinge PR 25 AME762926BP Variable Overlay Modern Hinge PR 25 AME76293BP Variable Overlay Modern Hinge PR 25 Variable Overlay Item # Description Unit Qty Less Full AME7929AEBP Variable Overlay Imperia Hinge PR 25 AME7929BBBP Variable Overlay Imperia Hinge PR 25 AME7929BBCM Variable Overlay Imperia Hinge PR 100 AME7929G10BP Variable Overlay Imperia Hinge PR 25 AME7929ORBBP Variable Overlay Imperia Hinge PR 25 AME792926BP Variable Overlay Imperia Hinge PR 25 AME792926CM Variable Overlay Imperia Hinge PR 100 AME79293BP Variable Overlay Imperia Hinge PR 25 SELF-CLOSING FACE MOUNT HINGES A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-47

48 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband SELF CLOSING DEMOUNTABLE HINGE SYSTEM Easy Mounting Reduce labor by simple one-step routing Doors slip into pre-routed slots Easy Adjustment Virtually eliminate callbacks One screw adjusts doors in all 3 directions No redrilling or shimming Increased Flexibility Interchange door styles, reduce inventory Ship doors separately to avoid damage Compatible with any frame style cabinet, wood or MDF Finish Codes 3 = Bright Brass, 14 = Nickel, AE = Antique Brass, BB = Burnished Brass, G9 = Sterling Nickel, G10 = Satin Nickel, ORB = Oil Rubbed Bronze, W = White Double Demountable Item # Description Unit Qty AME8700AECM 3/8" Inset Fully Adjustable PR 100 AME8700BBCM 3/8" Inset Fully Adjustable PR 100 AME8700G9CM 3/8" Inset Fully Adjustable PR 100 AME8700G10BP 3/8" Inset Fully Adjustable PR 25 AME8700ORBCM 3/8" Inset Fully Adjustable PR 100 AME8701BBCM 1/4" Overlay Fully Adjustable PR 100 AME8701G9CM 1/4" Overlay Fully Adjustable PR 100 AME8701G10CM 1/4" Overlay Fully Adjustable PR 100 AME8701ORBCM 1/4" Overlay Fully Adjustable PR 100 AME87013CM 1/4" Overlay Fully Adjustable PR 100 AME8704AECM 1/2" Overlay Fully Adjustable PR 100 AME8704BBCM 1/2" Overlay Fully Adjustable PR 100 AME8704G9CM 1/2" Overlay Fully Adjustable PR 100 AME8704G10CM 1/2" Overlay Fully Adjustable PR 100 AME8704ORBBP 1/2" Overlay Fully Adjustable PR 25 AME8704ORBCM 1/2" Overlay Fully Adjustable PR 100 AME8704WCM 1/2" Overlay Fully Adjustable PR 100 AME870414CM 1/2" Overlay Fully Adjustable PR 100 AME87043CM 1/2" Overlay Fully Adjustable PC 100 Single Demountable Item # Description Unit Qty AME871514CM 1/4" Overlay Full Wrap PR 100 AME8715ORBBP 1/4" Overlay Full Wrap PR 100 AME8719BBCM 1/2" Overlay Full Wrap PR 100 AME8719G10BP 1/2" Overlay Full Wrap PR 25 AME8719ORBCM 1/2" Overlay Full Wrap PR 100 AME871914CM 1/2" Overlay Full Wrap PR 100 AME87193CM 1/2" Overlay Full Wrap PR 100 Insert hinge into pre-routed frame slot and tighten screw. (Double demountable hinge shown) Less Less Full Full Insert hinge wing into door/slots, then clamp and tighten screw. Strong.065 steel hinges exceed KCMA, BHMA and ANSI standards. Full 3-way Adjustment H-48 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

49 SELF-CLOSING WRAP AROUND HINGES H Finish Codes 3 = Bright Brass, 14 = Nickel, BB = Burnished Brass, FB = Flat Black, G10 = Satin Nickel, ORB = Oil Rubbed Bronze, W = White, WI = Wrought Iron, WN = Weathered Nickel Self-Closing Partial Wrap Adjustable, 3/8" Inset Item # Description Unit Qty Less Full AME7565BBBP 3/8" Inset Adjustable Hinge PR 25 AME7565BBCM 3/8" Inset Adjustable Hinge PR 100 AME7565G10BP 3/8" Inset Adjustable Hinge PR 25 AME7565ORBBP 3/8" Inset Adjustable Hinge PR 25 AME7565WNBP 3/8" Inset Adjustable Hinge PR 25 Adjustable, 1/4" Overlay Item # Description Unit Qty Less Full AME7566BBCM 1/4" Overlay Hinge Partial Wrap PR 100 AME7566G10BP 1/4" Overlay Hinge Partial Wrap PR 25 AME7566ORBBP 1/4" Overlay Hinge Partial Wrap PR 25 AME7566WNBP 1/4" Overlay Hinge Partial Wrap PR 25 Adjustable, 1/2" Overlay Item # Description Unit Qty Less Full AME7550BBBP 1/2" Hinge Overlay Partial Wrap PR 25 AME7550BBCM 1/2" Hinge Overlay Partial Wrap PR 100 AME7550FBBP 1/2" Hinge Overlay Partial Wrap PR 25 AME7550G10BP 1/2" Hinge Overlay Partial Wrap PR 25 AME7550G10CM 1/2" Hinge Overlay Partial Wrap PR 100 AME7550ORBBP 1/2" Hinge Overlay Partial Wrap PR 25 AME7550ORBCM 1/2" Hinge Overlay Partial Wrap PR 100 AME7550WBP 1/2" Hinge Overlay Partial Wrap PR 25 AME7550WIBP 1/2" Hinge Overlay Partial Wrap PR 25 AME7550WNBP 1/2" Hinge Overlay Partial Wrap PR 25 AME755014BP 1/2" Hinge Overlay Partial Wrap PR 25 AME755014CM 1/2" Hinge Overlay Partial Wrap PR 100 AME75503D 1/2" Hinge Overlay Partial Wrap (no screws) PR A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-49

50 H FREE SWINGING FULL INSET FINIAL TIP HINGES Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband Full Inset have definitely come out of hiding with this elegant look for full inset doors. Designed with interleaved hinge wings, this innovative hinge series for full inset doors eliminates the need to mortise the door frame while providing a near zero gap finished appearance. Offered in many popular finishes to match decorative hardware Minaret and ball finial tips provide elegant accents Exclusive treatment assures silent reliable performance Patented angled set hole simplifies installation; easy horizontal/vertical adjustment Door gap as small as 1/16" Full and partial wrap styles, for all common door thicknesses: 11/16", 3/4", 13/16" Exceeds KCMA, BHMA standards for strength, finish quality and life cycle endurance Guaranteed for as long as the original consumer owns the home Sizes and Type 3175 = 3/4" Full Wrap 3180 = Partial Wrap T = 3/4" Door Thickness U = 13/16" Door Thickness B = Ball M = Minaret Item # Description Unit Qty Less Full AME3175TBAECM 3/4" Full Wrap Inset Hinge Ball PC 50 AME3175TBDAEPK 3/4" Full Wrap Inset Hinge Ball PC 50 AME3175TBFBPK 3/4" Full Wrap Inset Hinge Ball PC 50 AME3175TBG9CM 3/4" Full Wrap Inset Hinge Ball PC 50 AME3175TBG10PK 3/4" Full Wrap Inset Hinge Ball PC 50 AME3175TBORBPK 3/4" Full Wrap Inset Hinge Ball PC 50 AME3175TBWICM 3/4" Full Wrap Inset Hinge Ball PC 50 AME3175TB14PK 3/4" Full Wrap Inset Hinge Ball PC 50 AME3175TMAECM 3/4" Full Wrap Inset Hinge Minaret PC 50 AME3175TMBBCM 3/4" Full Wrap Inset Hinge Minaret PC 50 AME3175TMFBPK 3/4" Full Wrap Inset Hinge Minaret PC 50 AME3175TMG9CM 3/4" Full Wrap Inset Hinge Minaret PC 50 AME3175TMG10PK 3/4" Full Wrap Inset Hinge Minaret PC 50 AME3175TMORBPK 3/4" Full Wrap Inset Hinge Minaret PC 50 AME3175TMWIPK 3/4" Full Wrap Inset Hinge Minaret PC 50 AME3175TM14CM 3/4" Full Wrap Inset Hinge Minaret PC 50 Finish Codes 14 = Nickel AE = Antique Brass BB = Burnished Brass DAE = Dark Antique Brass FB = Flat Black G9 = Sterling Nickel G10 = Satin Nickel ORB = Oil Rubbed Bronze WI = Wrought Iron More Inset - next page H-50 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

51 FREE SWINGING FULL INSET FINIAL TIP HINGES & BUTT HINGES H Item # Description Unit Qty Less Full AME3180TBAEPK Inset Hinge Partial Wrap Ball PC 50 AME3180TBBBPK Inset Hinge Partial Wrap Ball PC 50 AME3180TBDAECM Inset Hinge Partial Wrap Ball PC 50 AME3180TBFBPK Inset Hinge Partial Wrap Ball PC 50 AME3180TBG9CM Inset Hinge Partial Wrap Ball PC 50 AME3180TBG10PK Inset Hinge Partial Wrap Ball PC 50 AME3180TBORBPK Inset Hinge Partial Wrap Ball PC 50 AME3180TBWICM Inset Hinge Partial Wrap Ball PC 50 AME3180TB14PK Inset Hinge Partial Wrap Ball PC 50 AME3180TMAECM Inset Hinge Partial Wrap Minaret PC 50 AME3180TMDAECM Inset Hinge Partial Wrap Minaret PC 50 AME3180TMFBPK Inset Hinge Partial Wrap Minaret PC 50 AME3180TMG10PK Inset Hinge Partial Wrap Minaret PC 50 AME3180TMG9CM Inset Hinge Partial Wrap Minaret PC 50 AME3180TMORBPK Inset Hinge Partial Wrap Minaret PC 50 AME3180TMWICM Inset Hinge Partial Wrap Minaret PC 50 AME3180TM14PK Inset Hinge Partial Wrap Minaret PC 50 AME3180UBDAECM 13/16" Inset Hinge Partial Wrap Ball PC 50 Tan or white Plastic Tenite case. Holds 5-11 lbs. Size: 1-1/15" L x 3/4" W x 11/16" H Strike: Steel (Antique English), 1-1/8" L x 7/8" W x 3/4" H Item# Description Unit Qty Less Full AME9765FPTCM Magnetic Catch Tan Inset EA 100 Butt 1-1/2" x 1-1/2" Item # Description Unit Qty Less Full AME2335AECM Furniture Butt Hinge Flush Antique English PR 400 Butt 1-3/8" x 2" Item # Description Unit Qty Less Full AME2355AEBP Furniture Butt Hinge Flush Antique English PR 25 Magnetic Hooks, - section G Finish Codes 14 = Nickel AE = Antique Brass BB = Burnished Brass DAE = Dark Antique English FB = Flat Black G9 = Sterling Nickel G10 = Satin Nickel ORB = Oil Rubbed Bronze WI = Wrought Iron 9765FPT Inset Doors A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-51

52 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband FREE SWINGING, TRASH DOOR & PIANO HINGES Finish Codes 3 = Bright Brass, 26 = Polished Chrome, G10 = Satin Nickel, MAE = Machine Antique English, ORB = Oil Rubbed Bronze 3/8" Inset Item # Description Unit Qty Less Full AME34173BP 3/8" Inset Modern Hinge PR 25 AME341726BP 3/8" Inset Modern Hinge PR 25 AME3417G10BP 3/8" Inset Modern Hinge PR 25 AME3417ORBBP 3/8" Inset Modern Hinge PR 25 3/8" Inset, Adjustable - Free Swinging Item # Description Unit Qty Less Full AME7687MAEPK 3/8" Hinge Inset PR 25 Pivot Hinge (Nickel Plated Steel) For flush mount pivoting trash doors Used extensively in fast food restaurants Item # Description Unit Qty Less Full COMR Trash Door Hinge EA 100 Terry Continuous/Piano Lengths Coils Gauge 0.040" " Pin Diameter 0.090" 0.065" Joint Length 1/2" 5/8" Countersunk Screw Holes 2" cc 2-3/8" cc Screws: All come with #5 x 5/8" screws except for stainless steel Item # Description Unit Qty Less Full TERCP22202S /4" x 72" Piano Hinge Nickel Plated EA 10 TERCP23302S /4" x 72" Piano Hinge Bright Brass Plated EA 10 TERCC21003C /2" x 72" Piano Hinge Stainless Steel EA 10 TERCP22203S /2" x 48" Piano Hinge Nickel Plated EA 10 TERCP22203S /2" x 72" Piano Hinge Nickel Plated EA 10 TERCP23303S /2" x 48" Piano Hinge Bright Brass Plated EA 10 TERCP23303S /2" x 72" Piano Hinge Bright Brass Plated EA 10 TERCP22205S721 2" x 72" Piano Hinge Nickel Plated EA 10 TERCP23305S721 2" x 72" Piano Hinge Bright Brass Plated EA 10 TERCP62203SXX3 1-1/2" x 100' Coiled Piano Hinge Nickel Plated EA 2 TERCP63303SXX3 1-1/2" x 100' Coiled Piano Hinge Brt Brass Plated EA H-52 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

53 FLIP FLOP TABLE HINGES & GLASS DOOR HINGES H Flip Flop Table Leaf Hinge Converts square tables to round tables or adds length to rectangular tables Leafs held securely under the table Open 180 and lock into position Width, depth, thickness & material affect load capacity, please test Item # Description Unit Qty PMI Flip Flop Table Leaf Hinge EA 1 Grass No-Bore Glass Door Hinge 180 opening angle Direct mounting on cabinet sidewall Inset application Includes self-adhesive pads For 4-6 mm glass thickness Diecast Nickel Plated Pull Item# Description Unit Qty Less Full NO-BORE GLASS DOOR HINGE GRA Left Side Above or Right Side Below - Hinge Arm PC 250 GRA Right Side Above or Left Side Below - Hinge Arm PC 250 Need 1 of each Hinge Arm to complete a pair NO-BORE GLASS DOOR PULL GRA Diecast Nickel Plated Pull with Adhesive Pads PC 250 More Glass Door - next page A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-53

54 H Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband GLASS & WOOD DOOR PIVOT HINGES Epco 510 Glass Door Pivot Hinge For glass thickness of 3/16"-1/4" Polybagged with 2 hinges, 2 plastic bushings, 2 metal plates and screws Plastic bushings receive the 5mm pin on the hinge and press fit into 8.5mm hole Item# Description Unit Qty Less Full EPO510BL Black Glass Door Hinge PR 100 EPO510BN Brushed Nickel Glass Door Hinge PR 100 EPO510PC Polished Chrome Glass Door Hinge PR 100 Epco 509 Glass Door Strike For glass thickness of 3/16"-1/4" Polybagged with stick-on cushion Item# Description Unit Qty Less Full EPO509BL Black Glass Door Strike EA 100 EPO509BN Brushed Nickel Glass Door Strike EA 100 EPO509PC Polished Chrome Glass Door Strike EA 100 Epco 511 Wood Door Pivot Hinge Stamped Steel Hinge Polybagged with 2 hinges, 2 plastic bushings & screws Item# Description Unit Qty Less Full EPO511 Wood Pivot Door Hinge PR 100 Epco 507 Single Magnetic Touch Latch Plastic case, polybagged with strike plate & screws Size: 1-25/32" L x 1-3/32" W x 5/8" H. Throw is 7/16" Item# Description Unit Qty Less Full EPO507BLPWS Black Magnetic Touch Latch EA 100 EPO507BRPWS Brown Magnetic Touch Latch EA 100 EPO507WHPWS White Magnetic Touch Latch EA 100 Epco 508 Double Magnetic Touch Latch Plastic case, polybagged with strike plate & screws Size: 1-13/16" L x 2-5/16" W x 11/16" H. Throw is 7/16" Item# Description Unit Qty Less Full EPO508BLPWS Black Double Magnetic Touch Latch EA 100 EPO508BRPWS Brown Double Magnetic Touch Latch EA 100 EPO508WHPWS White Double Magnetic Touch Latch EA 100 Sugatsune Single Magnetic Touch Latch (Rectangular) Highest quality mechanism and quiet operation (strike and screws provided) Size: 1-3/4" L x 1-7/16" W x 5/8" H. Throw is 5/8" For overlay doors, leave a 9/64" gap between the door and cabinet frame Item # Description Unit Qty Less Full SUGML80BLK Single Touch Latch Black EA 20 SUGML80BRN Single Touch Latch Brown EA 20 SUGML80WHT Single Touch Latch White EA 20 Sugatsune Double Magnetic Touch Latch (Rectangular) Highest quality mechanism and quiet operation (strike and screws provided) Size: 3" L x 1-3/16" W x 5/8" H. Throw is 7/32" For overlay doors, leave a 5/32" gap between the door and cabinet frame Item # Description Unit Qty Less Full SUGML30WBRN Double Touch Latch Brown EA 30 SUGML30WWHT Double Touch Latch White EA 30 H-54 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

55 HINGE, HARDWARE AND SLIDE SCREWS H Grass Pozi Drive Euro Screws Used for drawer slides and hinges in European style cabinetry Deep threads for maximum holding in MDF & particleboard 5mm nickel plated #2 Pozi Drive, Flat Head, Euro Screws Size Finish Item # Unit Qty Less Full 5mm x 7.5mm Pozi Drive Nickel GRA PC 500 5mm x 13mm Pozi Drive Nickel GRA PC 500 5mm x 18mm Pozi Drive Nickel GRA PC 500 Quick$crews Euro Screws, Flat Head Pozi or Phillips Drive Used for drawer slides and hinges in European style cabinetry Deep threads for maximum holding in MDF and particleboard #2 Phillips Drive, Flat head, Euro Screw, For Grass And Slides Has a slightly larger head to prevent pull through in Grass Description Finish Pack Price 1000 Pack Price 6.3mm x 13mm Phillips Drive Zinc QUI3500 QUI6022 #2 Square Drive, Flat Head, Euro Screw, For Grass and Slides Has a slightly larger head to prevent pull through in Grass Description Finish Pack Price 1000 Pack Price 6.3mm x 10.0mm Square Drive Zinc QUI13357 QUI mm x 11.5mm Square Drive Zinc QUI13358 QUI13401 #2 Pozi Drive, Flat Head, Euro Screws, For Non-Grass and Slides Description Finish Pack Price 1000 Pack Price 6.3mm x 10.0mm Pozi Drive Zinc - QUI mm x 11.5mm Pozi Drive Zinc QUI226 QUI mm x 13mm Pozi Drive Zinc QUI227 QUI mm x 30mm Pozi Drive Zinc - QUI11741 #2 Phillips Drive, Flat Head, Euro Screws, For Non-Grass and Slides Has a slightly larger head to prevent pull through in Grass Description Finish Pack Price 1000 Pack Price 6.3mm x 10mm Phillips Drive Zinc QUI13359 QUI13402 #2 Phillips Drive, Oval Head, Coarse Thread, Sharp Point Normally used on Amerock style decorative hinges Size Finish 1000 Pack Price 6 x 5/8" Antique Brass QUI x 5/8" Bright Brass QUI6088 QUI5870 QUI6088 A B C D E F G H I J K L M N Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-55

56 H HINGE, HARDWARE AND SLIDE SCREWS Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband #2 Drive, Round Washer Head, Coarse Thread Screws with Type 17 Auger Point Commonly used for mounting face frame hinges in cabinets The washer head and type 17 point facilitates a strong connection in single screw applications Size Finish Bulk Pack Qty Price 1000 Pack Price #2 PHILLIPS DRIVE, ROUND WASHER HEAD, COARSE THREAD, TYPE 17 AUGER POINT 8 x 3/4" Nickel QUI QUI14821 #2 Drive, Truss Head, Coarse Thread Screws, Type 17 Auger Point Commonly used for mounting face frame hinges in cabinets Size Finish Bulk Pack Qty Price 1000 Pack Price #2 SQUARE DRIVE, TRUSS HEAD, COARSE THREAD, TYPE 17 AUGER POINT 8 x 5/8" Zinc QUI QUI x 3/4" Zinc - - QUI13624 #2 PHILLIPS DRIVE, TRUSS HEAD, COARSE THREAD, TYPE 17 AUGER POINT 8 x 5/8" Zinc QUI QUI x 3/4" Zinc QUI QUI x 3/4" Ant. Brass QUI QUI8100 #2 Phillips Drive, Pan Head, Coarse Thread, Sharp Point Commonly used for mounting face frame hinges in cabinets Size Finish Bulk Pack Qty Price 1000 Pack Price 6 x 1/2" Zinc QUI QUI x 5/8" Zinc QUI QUI x 3/4" Zinc - - QUI x 3/4" Zinc - - QUI x 1-1/4" Zinc QUI QUI x 3/4" Zinc QUI QUI x 1" Zinc QUI QUI x 1-1/4" Zinc QUI QUI x 1-1/2" Zinc QUI QUI7811 #2 Square Drive, Pan Head, Coarse Thread Screws, Type 17 Auger Point Commonly used for mounting face frame hinges in cabinets Size Finish 1000 Pack Price 8 x 5/8" Zinc QUI x 3/4" Zinc QUI13622 #2 Phillips Drive, Pan Head, Coarse Thread, Type 17 Auger Point Size Finish Bulk Pack Qty Price 1000 Pack Price 6 x 1/2" Zinc QUI QUI x 5/8" Antique Brass QUI QUI x 5/8" Zinc - - QUI x 5/8" Zinc QUI QUI x 3/4" Zinc QUI QUI x 1" Zinc QUI QUI x 5/8" Nickel - - QUI x 3/4" Nickel QUI QUI x 3/4" Zinc QUI QUI9803 H-56 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f

57 Grass Round Head Phillips Hinge Screws Great for fastening Euro Style face frame hinges to the face frame #2 Phillips Drive, Round Head Size Finish 500 Pack Unit Qty Less Full 10 x 3/4" Nickel GRA PC 500 Grass Flat Head Phillips Hardware Screws Used for attaching hardware to wood, MDF or particleboard Phillips drive with flat head & deep thread design #2 Phillips Drive Flat Head Deep Thread Size Finish 500 Pack Unit Qty Less Full 6 x 5/8" Nickel GRA PC x 3/4" Nickel GRA PC x 1" Nickel GRA PC 500 Amerock Flat Head Hardware Screws For attaching hinges and drawer slides to particleboard or softwoods Phillips drive Type AB thread #2 Phillips Drive, Flat Head Size Finish Item # Bag Qty 1-9 Bags 10+ Bags 5 x 1/2" Bright Brass AME92555M3CM x 1/2" Burn. Brass AME92655BBCM x 5/8" Burn. Brass AME92657BBCM 200 Quick$crews Hardware Screws For attaching hinges and drawer slides to particleboard, melamine and MDF.275 O.D. Large Flat Head Screws are for hinge plates and drawer slides that have larger countersunk holes (many imports) #2 Phillips Drive, Flat Head, Coarse Thread, Sharp Point, Various Finishes Size Finish Bulk Pack Qty Price 1000 Pack Price 5 x 1/2" Antique Brass - - QUI x 5/8" Nickel QUI x 5/8" Nickel QUI QUI x 1/2" Antique Brass - - QUI x 1/2" Bright Brass - - QUI x 1/2" Zinc QUI QUI x 5/8" Antique Brass - - QUI x 5/8" Bright Brass - - QUI x 5/8" Zinc QUI QUI x 1" Nickel - - QUI x 1" Zinc QUI QUI x 1-1/4" Zinc QUI QUI x 1-1/2" Zinc QUI QUI x 5/8" Zinc QUI QUI x 5/8" Zinc QUI QUI5789 #2 Combo Drive, Flat Head, Coarse Thread, Sharp Point, Zinc Size Finish Bulk Pack Qty Price 5000 Pack Price 1000 Pack Price 6 x 5/8" Zinc QUI QUI10445 QUI10446 #2 Phillips Drive, Flat Head, Coarse Thread, Type 17 Auger Point, Zinc Size Finish Bulk Pack Qty Price 5000 Pack Price 1000 Pack Price 6 x 1/2" Zinc QUI QUI9172 QUI x 5/8" Zinc QUI QUI9173 QUI x 3/4" Zinc QUI QUI9174 QUI x 5/8" Zinc QUI QUI x 3/4" Zinc QUI QUI9179 HINGE, HARDWARE AND SLIDE SCREWS A B C D E F G H I J K L M N H Wood & Closet Shelf Hardware, Builders Organizers Legs & Levelers Hardware Fasteners Abrasives & Edgeband Index GREEN BAY p f SUN PRAIRIE p f WEST SALEM p f PEKIN, IL p f H-57

58 H HINGE & SLIDE SCREWS Index N M L K J I H G F E D C B A & Closet Organizers Wood Shelf Hardware, Legs & Levelers Builders Hardware Abrasives Fasteners & Edgeband #2 Square Drive, Flat Head, Coarse Thread, Type 17 Auger Point, Zinc Size Finish Bulk Pack Qty Price 5000 Pack Price 1000 Pack Price 6 x 1/2" Zinc QUI QUI13635 QUI x 5/8" Zinc QUI QUI13636 QUI x 3/4" Zinc QUI QUI13637 QUI13561 #2 Phillips Drive,.275 O.D. Large Flat Head, Coarse Thread, Type 17 Auger Point, Zinc Size Finish Bulk Pack Qty Price 5000 Pack Price 1000 Pack Price 6 x 5/8" Zinc QUI QUI13630 QUI x 3/4" Zinc QUI13643 #2 Phillips Drive,.275 O.D. Large Flat Head, Coarse Thread, Type 17 Auger Point, Nickel Size Finish Bulk Pack Qty Price 5000 Pack Price 1000 Pack Price 6 x 5/8" Nickel QUI QUI x 3/4" Nickel QUI QUI13634 QUI13646 #2 Phillips Drive,.275 O.D. Large Flat Head, Coarse Thread, Sharp Point, Nickel Size Finish Bulk Pack Qty Price 5000 Pack Price 1000 Pack Price 6 x 1/2" Nickel QUI QUI10736 QUI x 5/8" Nickel QUI QUI10737 QUI x 3/4" Nickel QUI QUI10738 QUI10741 #2 Phillips Drive, Flat Head, Undercut Head, Coarse Thread, Type 17 Auger Point, Zinc The undercut head seats flush in the countersink for a more aesthetic appearance Can be used on European drawer slides to prevent clicking Size Finish Bulk Pack Qty Price 5000 Pack Price 1000 Pack Price 6 x 1/2" Zinc QUI QUI6133 QUI x 5/8" Zinc QUI QUI6134 QUI6130 #2 Phillips Drive, Flat Head, Undercut Head, Coarse Thread, Sharp Point, #6 Body/#5 Head Size Finish Bulk Pack Qty Price 5000 Pack Price 1000 Pack Price 6 x 5/8" Zinc QUI QUI7351 QUI x 3/4" Zinc QUI QUI7352 QUI7355 H-58 MILWAUKEE p f MINNESOTA p f TRAVERSE CITY, MI p f ST LOUIS, MO p f