CS FramelessGlass is a cavity slider that has a toughened glass sheet fitted for a door.

Transcription

1 Cavity sliders are all about space. The term cavity slider refers to the cavity pocket (incl. track + carriages) installed within wall framing that allows a door to <slide> inside the wall. The benefit is a solution that leaves clear space on both sides of the wall and opening, encouraging cohesion between spaces. A CS FramelessGlass unit is distinctive. It uses a glass door leaf instead of typical wooden doors. The glass can provide a clear and unobstructed view through the doorway whether the door is open or closed. CS FramelessGlass is a cavity slider that has a toughened glass sheet fitted for a door. Frosted glass and other finishes, including branded options are available for privacy. Regardless of the glass finish you choose, light can pass through the door and between spaces. The translucent nature of a glass door provides an increased outlook and enhanced feeling of spatial flow. - Automated CS FramelessGlass Single unit with frosted glass door in an operating theatre. Another quality product from:

2 See-through Space Design Features & Options Various glass door options available including clear, frosted and tinted. Designed to fit into standard wall framing (90 x mm kiln dry). Available as Single or Bi-Parting double units. Can be supplied in two ways:. Clamp bracket (that holds the glass) hidden above head jambs - gives a clean look.. Clamp bracket visible below head jambs - access to carriages is easy and clearance is increased between floor and underside of head jambs. Supplied with wool-pile brush seals fitted to the jambs, which protect and help guide the glass door. Toughened glass door is very stable even in varying temperatures. The glass has an STC rating of, which aids in the sound reduction quality of the overall product. - Single unit with 0mm toughened Color Bak glass Resene Pursuit - Two CS FramelessGlass Single units with frosted glass doors and custom s/steel handles fitted. - CS FramelessGlass. Single unit with tempaclad frosted glass door.

3 What makes us so special! Why specify CS CavitySliders? Quality Our aim is to make the best quality cavity sliders. Therefore, every component is uniquely designed with this in mind. Standard -wheel carriage & mounting plate* *NZ Patent. Aust patent 00 0 (0) Service The only New Zealand manufacturer of cavity sliders to have NZ covered with branches. All branches offer a free site measure & quote. We re Local CS FOR DOORS is 00% New Zealand owned and our products are 00% New Zealand Made. Technology & Innovation Our engineers focus on constantly developing new products & refining existing ones. That s why our products come with a number of unique features. A few exclusive CS CavitySliders features (refer to pics on left): Heavy duty one-piece extruded aluminium track. Minimal carriage clearance inside the track ensures the door can t become jammed or jump off the track. Large diameter wheels with precision ground bearings ensure smooth running on carriages for years to come. Radiuses on track surfaces reduce friction and prevent dust build up on carriages. Glass clamp rail. Removable end cap. -wheel carriages are standard on all CS FramelessGlass units. CarriSnap quick release system allows easy removal of the door from the cavity pocket. Product Range We have over 0 standard products, or if you have other ideas we can make to order. Quality Assured CS CavitySliders are BRANZ appraised. Our Guarantee *Guarantee conditions apply. Contact CS FOR DOORS for details. Come see our door systems at CS FOR DOORS NZIA Award winning Head Office & Showroom. Check out the full range of products and use our online calculator at:

4 All copyright and other property in this document is reserved by Cavity Sliders Limited. Details and specifications are subject to change without notice. Whilst all care is taken to ensure the accuracy of all information, no responsibility will be accepted for any errors or omissions. CS FOR DOORS and CS Cavity Sliders are Registered Trademarks. New Zealand Patent No:.. CS FRAMELESSGLASS (O.D. 99) Technical Information How to specify (example) Product: Location: Door leaf dimensions: Door type: Glass finish: Single or Bi-Parting: Jamb type & finish: Framing size & material: Wall lining thickness: Gear type & finish: Handle type: Plan view (CAD) Packing Aluminium back stud Nog Wall lining Jack stud Elevation (CAD) Wall lining Track Carriage Flat jamb (for architraves) Glass door leaf Floor Cavity Sliders Limited Auckland Head Office - Rakino Way Mt Wellington PO Box 9, Penrose Auckland, NZ T F 09 -cell split jamb ~ CS FramelessGlass by CS FOR DOORS ~ Meeting room ~ 0 mm x 0 mm ~ 0mm toughened glass ~ Etchlite ~ Single ~ Grooved (for wall linings); Clear pine ~ 90 mm timber framing ~ 0 mm ~ CS 0kg track system & FramelessGlass clamp ~ 0mm glass D-pull handle Grooved jamb option Door handle Door leaf Flat jamb option (for architraves) Lintel Drawing is not to scale. Jack stud Drawing is not to scale. Timber pelmet block Rebate for wall lining Grooved head jamb option Skirting fixing block Bottom plate Bay of Plenty / Waikato 0 Newton Street Mt Maunganui T F 0 9 salesbop@csfordoors.co.nz Useful formulas (online ) Dimension Required Single Bi-Parting Trim height* DH + 9 DH + 9 Trim width* (DWx) - 0 (DWx) - 90 Distance between jambs* DW - (DWx) - Distance over jambs (Arch) DW + (DWx) + Distance over jambs (Grvd) DW + (DWx) + 0 Floor to top of head (Arch) DH - DH - Floor to top of head (Grvd) DH - DH - Floor to underside of head* DH - DH - DH = Door Height DW = Door Width * = Same calculations for both Architrave (Arch) & Grooved (Grvd) jambs Note: All dimensions are in millimetres Detail Options Standard CS FramelessGlass Features Trim height Trim width Lintel Is part of the framework. Closing jamb Always quoted as standard. Can be omitted if not needed. Jamb liners Available as: flat jambs ready for architraves or grooved for wall linings. jambs fitted with brush seals to protect and guide door. Track in one piece Heavy-duty aluminium. Back stud Strong and made of reliable, heavy-duty aluminium. Split jambs -Cell aluminium split jamb for strength. Bottom plate One-piece in aluminium. Pine nogs Fitted on both sides and offset for adjacent wall fixing. 9 0 Check out our detail options in more detail online: Incorporate any of the above architectural detail options with the CS FramelessGlass cavity slider to create a specific look or to provide a unique solution. Wellington Grenada Business Park Jamaica Drive Grenada North T F saleswgtn@csfordoors.co.nz 9 If extra fixing is required then in some cases extra nogs can be supplied or even a full sheet of ply on one side. Skirting blocks On either side of the bottom plate, to fix both linings and skirting. No visible floor track or guide. The door opening is always clear. Frameless glass door leaf Normally supplied as 0mm or mm thick toughened glass. Christchurch Marylands Place, Middleton T 0 F 0 0 saleschch@csfordoors.co.nz 0

5 Pull Handles CS FOR DOORS can supply a range of Pull Handles to suit our FramelessGlass Cavity Sliders. The following handle options work well, as they provide plenty of purchase when the door is in the fully closed or open position and look great on this style of door. Turin CS Code: Glass 0mm to mm Timber/Aluminium mm to 0mm Satin Stainless Steel CL00A Dalco D-Pull 0 CS Code: Glass 0mm to mm Satin Stainless Steel CL00A00 Windsor Tubular Pull Standard sizes range from 00mm to 00mm (A) Back to back pairs Also available as singles with face fix or rear through door fixing Marine Grade Stainless Steel Asso Pull Handle Glass 0mm to mm Timber 0mm to mm Brushed Stainless Steel Drawings & pictures are not to scale. All dimensions in millimetres. Bay of Plenty / Waikato T F 0 9 Christchurch T 0 F Ø9 A Ø 0 Centre to centre mm Wellington T F Auckland Head Office T F 09 All copyright and other property in this document is reserved by Cavity Sliders Limited. Details and specifications are subject to change without notice. Whilst all care is taken to ensure the accuracy of all information, no responsibility will be accepted for any errors or omissions Pull Handles