Curriculum Vitae. Driving license A+B 2010 VCA VOL Offshore Training, NOGEPA 0.5A Medical

Transcription

1 Curriculum Vitae Danny Franssens Name : Danny Franssens Day of birth : 12 th of September 1969 Experience since : 1987 Address : Groenendijk CS Kloosterzande Telephone : +31 (0) D.Franssens@zeelandnet.nl Resumé From the start of my career, I ve always combined work and education. This makes me a very practical worker and results in a broad knowledge and a lot of experience. I am flexible, polite and can work in difficult political environments. International work has my preference. You can describe me as a typical field engineer who has a very good understanding of application software; both loop control, logic and sequence control. I take responsibility (Good in reporting en follow-up of technical issues) and can lead a team or coach other people to improve their performance. The combination of DCS and ESD knowledge both hard- and software, experience with instrumentation, knowledge of industrial bus protocols, and process knowledge of gas and steam turbines is what makes me unique. Education and Training General Year MAVO LTS Electro Technical Training Royal Navy Meet- en regeltechniek basic and advanced (ROC) Industrial Automation Engineer (Dirksen) Certificates Valid till Driving license A+B 2010 VCA VOL Offshore Training, NOGEPA 0.5A Medical ATEX No expiration NEN1010 and NEN 3140 (dutch installation regulations) No expiration Triconex Certified Engineer EMC No expiration

2 Product training Year Measurement and Control Engineer, basic and advance (Royal Marine) 1988 I/A Training Release V6/ I/A Training Release I/A Training FF 2007 I/A Training Alliance Training 2006 I/A Training BC 2004 I/A Training BSA 2004 Triconex Certified Engineer 2006 Triconex introduction 2005 TUV training (no exame) 2006 Delta V, (5 days) 2008 PLC engineer (Dirksen) 2003 Gas turbine and Steam turbine (Royal Marine) 1988 Unix 2005 Infusion Training 2009 Knowledge and Experience Foxboro I/A * Triconex * Emerson Delta V * I/A versies ( ) E Tricon D Delta V versie xxx A IFDC +FDT/DTM D Trident D Control Studio On-line A SFC D Tristation D Operator Display A HLBL D Sequence of Event D Delta V Tune ICC D Cause & Effect B AMS B IACC D Structured Text D Recipe studio FoxCAE D FBD en Ladder D Batch I/A Series Batch C Gas Turbines D Provox Migration B AIM D Steam Turbines D RS3 Migration OPC FBM D Turbine machinery control D Other PLC/SCADA & DCS * MES/MIS * Automation knowledgde * Wonderware Intouch versie (x) B OSISOFT PI Profibus DP (V1) D Wonderware In Batch B AspenTech IP21 OPC D Wonderware Incontrol B WW QI Analyst Foundation Fieldbus D Fix 32 WW INtrack HART D ifix WW Euipement Performance Modbus D Allen Bradley PLC 5 WW operation Industrial Ethernet B Siemens S5 B WW Enterprice Integration Application Transmitters, Positioners D Siemens S7 A WW MES Loop tuning D Siemens PCS7 A GE Fanuc Proficy Workflow Alarm Management A Cubicle B GE Fanuc Proficy SOA BASF Toolkit versie 6.0 D Rosemaount B GE Fanuc Proficy Plant Applications ATEX D Infi90 B GE Fanuc Proficy Tracker Wireless B Honeywell TDC2000/3000 GE Fanuc Proficy Maintenance Matlab Gateway Provox B GE Fanuc Proficy Histrorian Installation & panel building D Languages ** IT-knowledge * Platforms * Dutch E MS Access D Unix D French A MS Word D Windows NT D English D MS Excel D Windows XP D German A HTML Windows Server 2003 D Autocad C Eplan SQL C++ Visual Basic C Visio D MS Projects D * Experience:A = theoritical knowledge B = < 1 year C = 1-3 year D = >3 year E = expert ** Language: A = some B= reasonable spoken, C = good spoken and reasonable written, D= good spoken and written E = mother tongue

3 Project overview Jan Now YLNG (Yemen LNG) Resident support engineer Preventive maintenance and health checks for mesh network 65 control processors, 20 workstations, 17 triconex systems. Responsible for all software and hardware Invensys DCS and Triconex safety systems Finetuning all communication links, modbus, Hart, Partial stroke tests, profibus and TSAA. Tuning parameters for process control Tests for startup sequences, automatic takeover and auto start sequences. Okt/Nov 2009 FFC Pakistan (via Invensys/CoSo Softec) Petro-chemical Senior System Engineer Preventive maintenance and health checks Active factory trend configuration AIM historian redundant configuration Configuration turbo machinery HMI s Configuration daily reports operation Sept 2009 Total K5CC platform (via Invensys/CoSo Softec) Senior Triconex Engineer Troubleshooting and software modifications Aug 2009 Conoco Phillips platform (via Invensys/CoSo Softec) Senior Triconex Engineer Upgrade Triconex system (Eeproms) Installed and implemented new software (Tristation, EHDM, SOE) Checked communication to DCS July 2009 Ras laffan Refinary Qatar (via Invensys/CoSo Softec) Senior System Engineer System performance checks Troubleshooting during start-up Commissioning June 2009 Talisman Bleoholm FPSO (via Invensys/CoSo Softec) Senior System Engineer Perform DCS,ODSF (offshore data storage and forward system)

4 software modifications on gas import Perform DCS, chemical reconfiguration of faceplates Perform DCS, ODSF software modifications on IPPC april 2009 may 2009 Yemgas Yemen (via Invensys/CoSo Softec) Senior System Engineer Invensys I/A Series DCS, Triconex, Hart multiplexers, Pakscan, partial stroke, time sync network, modbus communication with several PLC s. Commissioning the mesh network Set up communication between Rotork Pakscan and invensys DCS system Set up communication between Atlas Copco multidrop PLC and invensys DCS system Set up communication between Hart P&F mux and DCS Set up communication between Fieldcare PS and invensys DCS system Resolved issues with Triconex TSAA network Installed time synchronisation network for DCS and Triconex. Commissioning peer to peer connections Triconex. February 2009 March 2009 Talisman Bleoholm FPSO (via Invensys/CoSo Softec) Senior Commissioning Engineer Invensys I/A Series DCS, Triconex, Gas import project and metering signals to Aberdeen office. Modbus and OPC connections, ODSF, PI, PARS packages. Commissioning and implementing new gas import tags and displays Set up communication between Emerson flowcomputers and invensys DCS system Set up communication between ODSF server and PI application Installed chemical injection package, displays and control. September 2008 January 2009 BASF PO, Antwerp (via Invensys/CoSo Softec) Petro-chemical Senior Commissioning Engineer Invensys I/A Series DCS, Triconex, Profibus for package units and MCC and 1300 FF instruments. Start-up support during night shifts I/A + Tricon Commissioning engineer Investigating problems with FF instruments FF topology, coordinating all FF problems between customer, Invensys USA, Invensys local and third party vendors.

5 March 2008 and May July 2008 Total E&P, North Sea (via Invensys/CoSo Softec) Invensys I/A Series DCS Platform K6N/C I/A + Tricon Commissioning engineer Transmitter calibration, commissioning August 2007, December 2007, April 2008 and September 2008 Kittiwake, North Sea (via Invensys/CoSo Softec) Invensys I/A Series DCS Provox to I/A migration Start-up assistance (loop tuning gas turbine) OPC connectivity February 2008 Total Vlissingen (via Invensys/CoSo Softec) Invensys I/A Series DCS Network and DCS installation January 2008 Invensys Systems Belgium (via CoSo Softec) Several customer Internal support several I/A and Triconex jobs June 2006 December 2007 (part time) BASF, Antwerp (via Invensys/CoSo Softec) Site Service Manager BASF Invensys I/A Series DCS, ESD and third party equipment Monthly Reporting Follow up to Second Line Service Invensys (EMEATAC) Preparing Monthly meeting Follow up on action list Upgrade planning November 2007 Total E&P, North Sea (Invensys/CoSo Softec) Invensys I/A Series DCS Platform K6N/C I/A + Tricon Commissioning engineer

6 May 2007 BG Tunesia Hasdrubal platform Invensys I/A Series DCS and Triconex Troubleshooting and solving punchlists FAT SW issues in ESD and IA system HW modbuslink troubleshooting January March 2007 BASF, Antwerpen (via Invensys/CoSo Softec) Plant: Caprolactam Upgrade project from V6 to V8.2 5 node system online connected via serveral ATS Online upgrade boot hosts all CP s (CP30, CP40, CP60) Upgrade from CP s to FCP270 s Commissioning Trident, and later on extensions and upgrade September December 2006 BASF, Antwerpen (via Invensys/CoSo Softec) Plant : SAP/Acryl Acid 15 workstations in 2 control rooms. AIM historian, CP30 s, CP40 s, CP60 s, FCP270 en ZCP270 s, several ATS. Upgrade from Unix V6.x top XP V8.2 Engineering met FoxCAE, Installation and Commissioning of several ATS Commissioning of 2 Trident systems with TSAA connection Upgrade of Legacy historian to AIM Historian Testing and prepare for FAT for new Trident with Siemens PCS7 July 2006 BASF, Antwerpen (via Invensys/CoSo Softec) Plant Ethylene Oxide Commissioning 2 Tricon systems Firmware upgrade systems All failures April 2006 June 2006 Fluxys, Zeebrugge (via Invensys/CoSo Softec) LNG gas terminal Commissioning Trident Upgrade Spectrum boards Upgrade to V8, legacy I/O on FCP270

7 January December 2006 (part-time) Bayer, Antwerpen (via Invensys/CoSo Softec) Vopak, Vlissingen (via Invensys/CoSo Softec) Exxon Meerhout (via Invensys/CoSo Softec) and Gas, Plant Bayer Anon: Tricon upgrade Plant Vopak: troubleshooting network problems and implementing new one Plan Exxon: Start-up 4 Tricon, TCM upgrades (Honeywell TDC), Tristation upgrade May 2005 Degussa (Evonik), Antwerp (via Invensys/CoSo Softec) Training Engineer Invensys I/A Series DCS BMA (prussic acid), ME2, ACMC, MMP plants Total > 5500 Hardwire I/O and 7000 serial I/O Installation and Commissioning multiplexers of P&F Installation of Pactware Training to engineers October 2005 November 2005 (via Invensys/CoSo Softec) Exxon Zwijndrecht Petro-chemical Service engineer Upgrade of 4 Tricon systems to V10.x Installation and Commissioning Trilogger (part time) Several customers (via Invensys/CoSo Softec) Most ( Petro-) Service Engineer Smaller service jobs. Trouble shooting Small application changes Small extensions 24x7 on-call service support January 2004 December 2007 Total Fina (via Invensys/CoSo Softec) Petro-chemical Service engineer Failures Turbine Machinery Control Systems (Tricon) Preparation + Upgrade from version V8 to V10 June December 2006 (part-time) BASF, Antwerp (via Invensys/CoSo Softec) Service and Commissioning Engineer

8 22 workstations (8 quad heads), and 4 engineering stations (IACC) in the controlroom, 6 engineering stations with AIM historian, boot hosts, 4 operator stations in the field, 16 FT ZCP270 s, 2 FT FCP270 for TSAA communication with Trident, Modbus, Profibus, AOL, Batch Migration from Honeywell to I/A versie 7 XP Online upgrade from V7 XP to V8.1 (CP60 ZCP270) with temporary ATS Installed redundant I/A Batch Alarms online PC installed Plant Sentinel installed Installed AIM historian, AIM OPC, AIM Inform Installed batch readers Installed 2 Trident safety systems 2003 Borealis, Antwerp (Fabricom/GTI) Senior Commissioning Engineer Start-up Siemens PLC I/O test on Infi 90 Bailey System (ABB) and FSC safety system 2003 Hydro Agri, Sluiskil (Fabricom/GTI) Senior Commissioning Engineer CO2 plant 1 & 2 Testing Hima Safety system Make testing procedures al test on Rosemount Provue (Emerson) Dow, Terneuzen (Fabricom/GTI) Senior Commissioning Engineer Dowlex train 3, Cubicle system, 3500 Hardwired I/O Supervisor during testing (witness) Procedure advisor Responsible for hand over turn key project 2002 Hydro Agri, Sluiskil (Fabricom/GTI) Commissioning Engineer Plant: CO2 plant Du Pont, Dordrecht (Fabricom/GTI) Chemie

9 Diverse 2002 Broom Chemie, (Fabricom/GTI) Chemie Diverse 2002 Cerestar (Fabricom/GTI) Chemie Diverse 2002 Dow, Terneuzen (Fabricom/GTI) Diverse Cubicle According to NEN set-up calibration lab Audit preparation and validation calibration lab 2003 Indaver, Antwerpen (Fabricom/GTI) Diverse I/A Series + Siemens S Hydro Agri, Sluiskil (Fabricom/GTI) E&I engineer CCR+ Salpeter Acid Plant Corrective maintenance Small upgrade projects on Provox and Hima systems Dow, Terneuzen (Electron Breda) Measurement and Control Engineer LDPE Plant Installation M&C equipment Looptesting M&C equipment

10 Royal Navy Offshore Senior E&I Engineer Ship: Hr Ms. Abraham Crijnssen All E&I for engine control equipment (gas turbines) Preventive Maintenance Corrective Maintenance Royal Navy Offshore Trouble shooting engineer Location; Curacao Repair and troubleshooting on: Radio equipment Diesel generators Utilities Batteries Infra structure equipment Royal Navy Offshore E&I Engineer Ship: Hr Ms. Poolster Resolving E&I failures (steam turbines and equipment) Corrective maintenance E&I Preventive maintenance E&I