CATALOG PROXIMITY SWITCHES & SENSOR CABLES

Transcription

1 SENSOR TECHNOLOGY CATALOG PROXIMITY SWITCHES & SENSOR CABLES

2 This page intentionally left blank

3 Table of Contents Cylindrical inductive proximity switches Standard, extended and long sensing ranges both in standard and short body Rectangular inductive proximity switches Available in stand and long sensing ranges Cylindrical inductive proximity switches with full metal body Standard, extended and long sensing ranges both in standard and short body Cylindrical inductive proximity sensors with analog output With either 0 10V voltage output or 0 20mA current output Cylindrical capacitive proximity switches Available with PBT resin, nickel plated brass or stainless steel body Sensor cables With M5, M8 or M12 connector in PVC or PUR/PVC General information All you need to know about the characteristics and use of proximity sensors Terminal connections Connection data for both cable type and connector type sensors

4 This page intentionally left blank

5 Cylindrical Inductive Proximity Switches Ø3 and M4 Sensors body, available in standard and long sensing range M5 Sensors Standard, short or ultra short body Available in standard, extended and long sensing range M8 Sensors Standard or short body Available in standard, extended and long sensing range M12 Sensors Standard or short body Available in standard, extended and long sensing range M18 Sensors Standard or short body Available in standard, extended and long sensing range M30 Sensors Standard or short body Available in standard, extended and long sensing range

6 This page intentionally left blank 2

7 3 ø & M4 INDUCTIVE PROXIMITY SWITCHES Standard sensing distance body 3ø M4 M4 Connection Cable 2m (PUR), 2.3ø 3 x 0.15 Cable 2m (PUR), 2.3ø 3 x 0.15 M5 connector Shielded Non shielded Switching distance Sn mm 0.8 mm 0.8 mm 0.8 mm POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 22 gr. ± 22 gr. ± 30 gr. NPN N.O. FCU1 D030.8N A3U2 FCU N A3U2 FCU N A3U0.2/P5 NPN N.C. FCU1 D030.8N B3U2 FCU N B3U2 FCU N B3U0.2/P5 PNP N.O. FCU1 D030.8P A3U2 FCU P A3U2 FCU P A3U0.2/P5 PNP N.C. FCU1 D030.8P B3U2 FCU P B3U2 FCU P B3U0.2/P5 3

8 3 ø & M4 INDUCTIVE PROXIMITY SWITCHES Long sensing distance body 3ø M4 M4 Connection Cable 2m (PUR), 2.3ø 3 x 0.15 Cable 2m (PUR), 2.3ø 3 x 0.15 M5 connector Shielded Non shielded Switching distance Sn mm 1.0 mm 1.0 mm 1.0 mm POM <1.5 V Switching frequency 3 KHz 2 KHz Response time 0.1 ms / 0.1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 22 gr. ± 22 gr. ± 30 gr. NPN N.O. LCU1 D0301N A3S2 LCU1 0401N A3S2 LCU1 0401N A3S0.2/P5 NPN N.C. LCU1 D0301N B3S2 LCU1 0401N B3S2 LCU1 0401N B3S0.2/P5 PNP N.O. LCU1 D0301P A3S2 LCU1 0401P A3S2 LCU1 0401P A3S0.2/P5 PNP N.C. LCU1 D0301P B3S2 LCU1 0401P B3S2 LCU1 0401P B3S0.2/P5 4

9 M5 INDUCTIVE PROXIMITY SWITCH Standard sensing distance body M5 Connection Cable 2m (PUR), 2.7ø 3 x 0.15 M5 connector M8 connector Shielded Non shielded Switching distance Sn mm 0.8 mm POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 25 gr. ± 13 gr. ± 14 gr. NPN N.O. FCU N A3S2 FCU N AMU4 FCU N ACU3 NPN N.C. FCU N B3S2 FCU N BMU4 FCU N BCU3 PNP N.O. FCU P A3S2 FCU P AMU4 FCU P ACU3 PNP N.C. FCU P B3S2 FCU P BMU4 FCU P BCU3 5

10 M5 INDUCTIVE PROXIMITY SWITCH Long sensing distance body M5 Connection Cable 2m (PUR), 2.7ø 3 x 0.15 M5 connector M8 connector Shielded Non shielded Switching distance Sn mm 1.5 mm POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 22 gr. ± 18 gr. ± 20 gr. NPN N.O. LCU N A3U2 LCU N AMU4 LCU N ACU3 NPN N.C. LCU N B3U2 LCU N BMU4 LCU N BCU3 PNP N.O. LCU N A3U2 LCU N AMU4 LCU N ACU3 PNP N.C. LCU N B3U2 LCU N BMU4 LCU N BCU3 6

11 M8 INDUCTIVE PROXIMITY SWITCH Standard sensing distance body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 1 mm 2 mm 1 mm 2 mm 1 mm 2 mm POM With LED Without LED <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 40 gr. ± 15 gr. ± 22 gr. NPN N.O. FCU1 0801N A3U2 FCU2 0802N A3U2 FCU1 0801N ACU3 FCU2 0802N ACU3 FCU1 0801N ARU4 FCU2 0802N ARU4 NPN N.C. FCU1 0801N B3U2 FCU2 0802N B3U2 FCU1 0801N BCU3 FCU2 0802N BCU3 FCU1 0801N BRU4 FCU2 0802N BRU4 PNP N.O. FCU1 0801P A3U2 FCU2 0802P A3U2 FCU1 0801P ACU3 FCU2 0802P ACU3 FCU1 0801P ARU4 FCU2 0802P ARU4 PNP N.C. FCU1 0801P B3U2 FCU2 0802P B3U2 FCU1 0801P BCU3 FCU2 0802P BCU3 FCU1 0801P BRU4 FCU2 0802P BRU4 7

12 M8 INDUCTIVE PROXIMITY SWITCH Standard sensing distance body 2-wire M8 Connection Cable 2m (PUR), 3ø 2 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 1 mm 2 mm 1 mm 2 mm 1 mm 2 mm POM With LED Without LED VDC 2 wire Continuous load current ma <1.2 ma <8 V (@ Icont.) Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <2% (Sr) Reverse polarity protection >120 ma RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 40 gr. ± 15 gr. ± 22 gr. NPN/PNP N.O. FCU1 0801C A2U2 FCU2 0802C A2U2 FCU1 0801C ACU3 FCU2 0802C ACU3 FCU1 0801C ARU4 FCU2 0802C ARU4 NPN/PNP N.C. FCU1 0801C B2U2 FCU2 0802C B2U2 FCU1 0801C BCU3 FCU2 0802C BCU3 FCU1 0801C BRU4 FCU2 0802C BRU4 8

13 M8 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Short stainless steel body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector Shielded Non shielded Switching distance Sn mm 1 mm 2mm 1 mm 2 mm POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 47 gr. ± 12 gr. NPN N.O. FCU1 0801N A3S2 FCU2 0802N A3S2 FCU1 0801N ACS3 FCU2 0802N ACS3 NPN N.C. FCU1 0801N B3S2 FCU2 0802N B3S2 FCU1 0801N BCS3 FCU2 0802N BCS3 PNP N.O. FCU1 0801P A3S2 FCU2 0802P A3S2 FCU1 0801P ACS3 FCU2 0802P ACS3 PNP N.C. FCU1 0801P B3S2 FCU2 0802P B3S2 FCU1 0801P BCS3 FCU2 0802P BCS3 9

14 M8 INDUCTIVE PROXIMITY SWITCH Extended sensing distance body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector Shielded Non shielded Switching distance Sn mm 2 mm 4 mm 2 mm 4 mm POM <1.5 V Switching frequency 2 KHz 1 KHz 2 KHz 1 KHz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 40 gr. ± 15 gr. NPN N.O. ECU1 0802N A3U2 ECU2 0804N A3U2 ECU1 0802N ACU3 ECU2 0804N ACU3 NPN N.C. ECU1 0802N B3U2 ECU2 0804N B3U2 ECU1 0802N BCU3 ECU2 0804N BCU3 PNP N.O. ECU1 0802P A3U2 ECU2 0804P A3U2 ECU1 0802P ACU3 ECU2 0804P ACU3 PNP N.C. ECU1 0802P B3U2 ECU2 0804P B3U2 ECU1 0802P BCU3 ECU2 0804P BCU3 10

15 M8 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Short stainless steel body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 2 mm 4 mm 2 mm 4 mm 2 mm 4 mm POM With LED Without LED <1.5 V Switching frequency 2 KHz 1 KHz 2 KHz 1 KHz 2 KHz 1 KHz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 47 gr. ± 14 gr. ± 17 gr. NPN N.O. ECU1 0802N A3S2 ECU2 0804N A3S2 ECU1 0802N ACS3 ECU2 0804N ACS3 ECU1 0802N ARS4 ECU2 0804N ARS4 NPN N.C. ECU1 0802N B3S2 ECU2 0804N B3S2 ECU1 0802N BCS3 ECU2 0804N BCS3 ECU1 0802N BRS4 ECU2 0804N BRS4 PNP N.O. ECU1 0802P A3S2 ECU2 0804P A3S2 ECU1 0802P ACS3 ECU2 0804P ACS3 ECU1 0802P ARS4 ECU2 0804P ARS4 PNP N.C. ECU1 0802P B3S2 ECU2 0804P B3S2 ECU1 0802P BCS3 ECU2 0804P BCS3 ECU1 0802P BRS4 ECU2 0804P BRS4 11

16 M8 INDUCTIVE PROXIMITY SWITCH Long sensing distance Nickel plated brass body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 3 mm 6 mm 3 mm 6mm 3 mm 6 mm Nickel plated brass POM With LED Without LED <2.0 V Switching frequency 1 KHz Response time 0.1 ms / 0.1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 40 gr. ± 20 gr. ± 22 gr. NPN N.O. LCM1 0803N A3U2 LCM2 0806N A3U2 LCM1 0803N ACU3 LCM2 0806N ACU3 LCM1 0803N ARU4 LCM2 0806N ARU4 NPN N.C. LCM1 0803N B3U2 LCM2 0806N B3U2 LCM1 0803N BCU3 LCM2 0806N BCU3 LCM1 0803N BRU4 LCM2 0806N BRU4 PNP N.O. LCM1 0803P A3U2 LCM2 0806P A3U2 LCM1 0803P ACU3 LCM2 0806P ACU3 LCM1 0803P ARU4 LCM2 0806P ARU4 PNP N.C. LCM1 0803P B3U2 LCM2 0806P B3U2 LCM1 0803P BCU3 LCM2 0806P BCU3 LCM1 0803P BRU4 LCM2 0806P BRU4 12

17 M8 INDUCTIVE PROXIMITY SWITCH Long sensing distance Short nickel plated brass body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector Shielded Non shielded Switching distance Sn mm 3 mm 3 mm Nickel plated brass POM <2 V Switching frequency 1 KHz Response time 0.1 ms / 0.1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 47 gr. ± 42 gr. NPN N.O. LCM1 0803N A3S2 LCM1 0803N ACS3 NPN N.C. LCM1 0803N B3S2 LCM1 0803N BCS3 PNP N.O. LCM1 0803P A3S2 LCM1 0803P ACS3 PNP N.C. LCM1 0803P B3S2 LCM1 0803P BCS3 13

18 M8 INDUCTIVE PROXIMITY SWITCH Standard, extended and long sensing distance Ultra-short stainless steel body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 Shielded Non shielded Switching distance Sn mm Standard: 1 mm Extended: 2 mm Long: 3 mm POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 25 gr. NPN N.O. FCU1 0801N A3R2 ECU1 0802N A3R2 LCU1 0803N A3R2 NPN N.C. FCU1 0801N B3R2 ECU1 0802N B3R2 LCU1 0803N B3R2 PNP N.O. FCU1 0801P A3R2 ECU1 0802P A3R2 LCU1 0803P A3R2 PNP N.C. FCU1 0801P B3R2 ECU1 0802P B3R2 LCU1 0803P B3R2 14

19 M12 INDUCTIVE PROXIMITY SWITCH Standard sensing distance body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 2 mm 4 mm 2 mm 4 mm POM PBT POM PBT <1.5 V Switching frequency 2 KHz 1 KHz 2 KHz 1 KHz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 67 gr. ± 65 gr. ± 31 gr. ± 30 gr. NPN N.O. FCU1 1202N A3U2 FCU2 1204N A3U2 FCU1 1202N ARU4 FCU2 1204N ARU4 NPN N.C. FCU1 1202N B3U2 FCU2 1204N B3U2 FCU1 1202N BRU4 FCU2 1204N BRU4 PNP N.O. FCU1 1202P A3U2 FCU2 1204P A3U2 FCU1 1202P ARU4 FCU2 1204P ARU4 PNP N.C. FCU1 1202P B3U2 FCU2 1204P B3U2 FCU1 1202P BRU4 FCU2 1204P BRU4 15

20 M12 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Short stainless steel body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 2 mm 4 mm 2 mm 4 mm POM PBT POM PBT <1.5 V Switching frequency 2 KHz 1 KHz 2 KHz 1 KHz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 62 gr. ± 60 gr. ± 25 gr. ± 23 gr. NPN N.O. FCU1 1202N A3S2 FCU2 1204N A3S2 FCU1 1202N ARS4 FCU2 1204N ARS4 NPN N.C. FCU1 1202N B3S2 FCU2 1204N B3S2 FCU1 1202N BRS4 FCU2 1204N BRS4 PNP N.O. FCU1 1202P A3S2 FCU2 1204P A3S2 FCU1 1202P ARS4 FCU2 1204P ARS4 PNP N.C. FCU1 1202P B3S2 FCU2 1204P B3S2 FCU1 1202P BRS4 FCU2 1204P BRS4 16

21 M12 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Short stainless steel body 2-wire M12 Connection Cable 2m (PUR), 3ø 2 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 2 mm 4 mm 2 mm 4 mm POM PBT POM PBT With LED Without LED VDC 2 wire Continuous load current ma <0.8 ma <6 V (@ Icont.) Switching frequency 1 KHz Response time 0.2 ms / 0.2 ms <2% (Sr) Reverse polarity protection >120 ma RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 67 gr. ± 65 gr. ± 31 gr. ± 30 gr. NPN/PNP N.O. FCU1 1202C A2U2 FCU2 1204C A2U2 FCU1 1202C ARU4 FCU2 1204C ARU4 NPN/PNP N.C. FCU1 1202C B2U2 FCU2 1204C B2U2 FCU1 1202C BRU4 FCU2 1204C BRU4 17

22 M12 INDUCTIVE PROXIMITY SWITCH Extended sensing distance body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 4 mm 8 mm 4 mm 8 mm POM PBT POM PBT <1.5 V Switching frequency 2 KHz 1 KHz 2 KHz 1 KHz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 67 gr. ± 31 gr. NPN N.O. ECU1 1204N A3U2 ECU2 1208N A3U2 ECU1 1204N ARU4 ECU2 1208N ARU4 NPN N.C. ECU1 1204N B3U2 ECU2 1208N B3U2 ECU1 1204N BRU4 ECU2 1208N BRU4 PNP N.O. ECU1 1204P A3U2 ECU2 1208P A3U2 ECU1 1204P ARU4 ECU2 1208P ARU4 PNP N.C. ECU1 1204P B3U2 ECU2 1208P B3U2 ECU1 1204P BRU4 ECU2 1208P BRU4 18

23 M12 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Short stainless steel body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 4 mm 8 mm 4 mm 8 mm POM PBT POM PBT <1.5 V Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 62 gr. ± 25 gr. NPN N.O. ECU1 1204N A3S2 ECU2 1208N A3S2 ECU1 1204N ARS4 ECU2 1208N ARS4 NPN N.C. ECU1 1204N B3S2 ECU2 1208N B3S2 ECU1 1204N BRS4 ECU2 1208N BRS4 PNP N.O. ECU1 1204P A3S2 ECU2 1208P A3S2 ECU1 1204P ARS4 ECU2 1208P ARS4 PNP N.C. ECU1 1204P B3S2 ECU2 1208P B3S2 ECU1 1204P BRS4 ECU2 1208P BRS4 19

24 M12 INDUCTIVE PROXIMITY SWITCH Long sensing distance Nickel plated brass body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 6 mm 10 mm 6 mm 10 mm Nickel plated brass POM PBT PBT <2 V Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 56 gr. ± 55 gr. ± 31 gr. ± 30 gr. NPN N.O. LCM1 1206N A3U2 LCM2 1210N A3U2 LCM1 1206N ARU4 LCM2 1210N ARU4 NPN N.C. LCM1 1206N B3U2 LCM2 1210N B3U2 LCM1 1206N BRU4 LCM2 1210N BRU4 PNP N.O. LCM1 1206P A3U2 LCM2 1210P A3U2 LCM1 1206P ARU4 LCM2 1210P ARU4 PNP N.C. LCM1 1206P B3U2 LCM2 1210P B3U2 LCM1 1206P BRU4 LCM2 1210P BRU4 20

25 M12 INDUCTIVE PROXIMITY SWITCH Long sensing distance Short nickel plated brass body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 6 mm 10 mm 6 mm 10 mm Nickel plated brass POM <2 V Switching frequency 1 KHz Response time 0.1 ms / 0.1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 25 gr. ± 23 gr. ± 25 gr. ± 23 gr. NPN N.O. LCM1 1206N A3S2 LCM2 1210N A3S2 LCM1 1206N ARS4 LCM2 1210N ARS4 NPN N.C. LCM1 1206N B3S2 LCM2 1210N B3S2 LCM1 1206N BRS4 LCM2 1210N BRS4 PNP N.O. LCM1 1206P A3S2 LCM2 1210P A3S2 LCM1 1206P ARS4 LCM2 1210P ARS4 PNP N.C. LCM1 1206P B3S2 LCM2 1210P B3S2 LCM1 1206P BRS4 LCM2 1210P BRS4 21

26 M18 INDUCTIVE PROXIMITY SWITCH Standard sensing distance body M18 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 5 mm 8 mm 5 mm 8 mm PBT <1.5 V Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 153 gr. ± 144 gr. ± 94 gr. ± 91 gr. NPN N.O. FCU1 1805N A3U2 FCU2 1808N A3U2 FCU1 1805N ARU4 FCU2 1808N ARU4 NPN N.C. FCU1 1805N B3U2 FCU2 1808N B3U2 FCU1 1805N BRU4 FCU2 1808N BRU4 PNP N.O. FCU1 1805P A3U2 FCU2 1808P A3U2 FCU1 1805P ARU4 FCU2 1808P ARU4 PNP N.C. FCU1 1805P B3U2 FCU2 1808P B3U2 FCU1 1805P BRU4 FCU2 1808P BRU4 22

27 M18 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Short stainless steel body M18 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 5 mm 8 mm 5 mm 8 mm PBT <1.5 V Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 132 gr. ± 134 gr. ± 50 gr. ± 50 gr. NPN N.O. FCU1 1805N A3S2 FCU2 1808N A3S2 FCU1 1805N ARS4 FCU2 1808N ARS4 NPN N.C. FCU1 1805N B3S2 FCU2 1808N B3S2 FCU1 1805N BRS4 FCU2 1808N BRS4 PNP N.O. FCU1 1805P A3S2 FCU2 1808P A3S2 FCU1 1805P ARS4 FCU2 1808P ARS4 PNP N.C. FCU1 1805P B3S2 FCU2 1808P B3S2 FCU1 1805P BRS4 FCU2 1808P BRS4 23

28 M18 INDUCTIVE PROXIMITY SWITCH Standard sensing distance body 2-wire M18 Connection Cable 2m (PUR), 5ø 2 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 5 mm 8 mm 5 mm 8 mm PBT With LED Without LED VDC 2 wire Continuous load current ma <0.8 ma <6 V (@ Icont.) Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms <2% (Sr) Reverse polarity protection >120 ma RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 153 gr. ± 144 gr. ± 94 gr. ± 91 gr. NPN/PNP N.O. FCU1 1805C A2U2 FCU2 1808C A2U2 FCU1 1805C ARU4 FCU2 1808C ARU4 NPN/PNP N.C. FCU1 1805C B2U2 FCU2 1808C B2U2 FCU1 1805C BRU4 FCU2 1808C BRU4 24

29 M18 INDUCTIVE PROXIMITY SWITCH Extended sensing distance body M18 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 8 mm 16 mm 8 mm 16 mm PBT <1.5 V Switching frequency 500 Hz 150 Hz 500 Hz 150 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 153 gr. ± 144 gr. ± 94 gr. ± 91 gr. NPN N.O. ECU1 1808N A3U2 ECU2 1816N A3U2 ECU1 1808N ARU4 ECU2 1816N ARU4 NPN N.C. ECU1 1808N B3U2 ECU2 1816N B3U2 ECU1 1808N BRU4 ECU2 1816N BRU4 PNP N.O. ECU1 1808P A3U2 ECU2 1816P A3U2 ECU1 1808P ARU4 ECU2 1816P ARU4 PNP N.C. ECU1 1808P B3U2 ECU2 1816P B3U2 ECU1 1808P BRU4 ECU2 1816P BRU4 25

30 M18 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Short stainless steel body M18 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 8 mm 16 mm 8 mm 16 mm PBT <1.5 V Switching frequency 500 Hz 150 Hz 500 Hz 150 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 132 gr. ± 50 gr. NPN N.O. ECU1 1808N A3S2 ECU2 1816N A3S2 ECU1 1808N ARS4 ECU2 1816N ARS4 NPN N.C. ECU1 1808N B3S2 ECU2 1816N B3S2 ECU1 1808N BRS4 ECU2 1816N BRS4 PNP N.O. ECU1 1808P A3S2 ECU2 1816P A3S2 ECU1 1808P ARS4 ECU2 1816P ARS4 PNP N.C. ECU1 1808P B3S2 ECU2 1816P B3S2 ECU1 1808P BRS4 ECU2 1816P BRS4 26

31 M18 INDUCTIVE PROXIMITY SWITCH Long sensing distance Nickel plated brass body M18 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 12 mm 20 mm 12 mm 20 mm Nickel plated brass PBT <0.05 ma <2 V Switching frequency 300 Hz 100 Hz 300 Hz 100 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 110 gr. ± 114 gr. ± 66 gr. ± 70 gr. NPN N.O. LCM1 1812N A3U2 LCM2 1820N A3U2 LCM1 1812N ARU4 LCM2 1820N ARU4 NPN N.C. LCM1 1812N B3U2 LCM2 1820N B3U2 LCM1 1812N BRU4 LCM2 1820N BRU4 PNP N.O. LCM1 1812P A3U2 LCM2 1820P A3U2 LCM1 1812P ARU4 LCM2 1820P ARU4 PNP N.C. LCM1 1812P B3U2 LCM2 1820P B3U2 LCM1 1812P BRU4 LCM2 1820P BRU4 27

32 M18 INDUCTIVE PROXIMITY SWITCH Long sensing distance Short nickel plated brass body M18 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 12 mm 20 mm 12 mm 20 mm Nickel plated brass POM <2 V Switching frequency 1 KHz Response time 0.1 ms / 0.1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 132 gr. ± 134 gr. ± 50 gr. ± 50 gr. NPN N.O. LCM1 1812N A3S2 LCM2 1820N A3S2 LCM1 1812N ARS4 LCM2 1820N ARS4 NPN N.C. LCM1 1812N B3S2 LCM2 1820N B3S2 LCM1 1812N BRS4 LCM2 1820N BRS4 PNP N.O. LCM1 1812P A3S2 LCM2 1820P A3S2 LCM1 1812P ARS4 LCM2 1820P ARS4 PNP N.C. LCM1 1812P B3S2 LCM2 1820P B3S2 LCM1 1812P BRS4 LCM2 1820P BRS4 28

33 M30 INDUCTIVE PROXIMITY SWITCH Standard sensing distance body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 10 mm 15 mm 10 mm 15 mm PBT <1.5 V Switching frequency 300 Hz 150 Hz 300 Hz 150 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 217 gr. ± 207 gr. ± 187 gr. ± 179 gr. NPN N.O. FCU1 3010N A3U2 FCU2 3015N A3U2 FCU1 3010N ARU4 FCU2 3015N ARU4 NPN N.C. FCU1 3010N B3U2 FCU2 3015N B3U2 FCU1 3010N BRU4 FCU2 3015N BRU4 PNP N.O. FCU1 3010P A3U2 FCU2 3015P A3U2 FCU1 3010P ARU4 FCU2 3015P ARU4 PNP N.C. FCU1 3010P B3U2 FCU2 3015P B3U2 FCU1 3010P BRU4 FCU2 3015P BRU4 29

34 M30 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Short stainless steel body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 10 mm 15 mm 10 mm 15 mm PBT <1.5 V Switching frequency 300 Hz 150 Hz 300 Hz 150 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 180 gr. ± 182 gr. ± 111 gr. ± 121 gr. NPN N.O. FCU1 3010N A3S2 FCU2 3015N A3S2 FCU1 3010N ARS4 FCU2 3015N ARS4 NPN N.C. FCU1 3010N B3S2 FCU2 3015N B3S2 FCU1 3010N BRS4 FCU2 3015N BRS4 PNP N.O. FCU1 3010P A3S2 FCU2 3015P A3S2 FCU1 3010P ARS4 FCU2 3015P ARS4 PNP N.C. FCU1 3010P B3S2 FCU2 3015P B3S2 FCU1 3010P BRS4 FCU2 3015P BRS4 30

35 M30 INDUCTIVE PROXIMITY SWITCH Standard sensing distance body 2-wire M30 Connection Cable 2m (PUR), 5.8ø 2 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 10 mm 15 mm 10 mm 15 mm PBT With LED Without LED VDC 2 wire Continuous load current ma <0.8 ma <6 V (@ Icont.) Switching frequency 500 Hz 200 Hz 500 Hz 200 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <2% (Sr) Reverse polarity protection >120 ma RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 217 gr. ± 207 gr. ± 187 gr. ± 179 gr. NPN/PNP N.O. FCU1 3010C A2U2 FCU2 3015C A2U2 FCU1 3010C ARU4 FCU2 3015C ARU4 NPN/PNP N.C. FCU1 3010C B2U2 FCU2 3015C B2U2 FCU1 3010C BRU4 FCU2 3015C BRU4 31

36 M30 INDUCTIVE PROXIMITY SWITCH Extended sensing distance body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 16 mm 25 mm 16 mm 25 mm PBT <1.5 V Switching frequency 150 Hz 100 Hz 150 Hz 100 Hz Response time 1 ms / 1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 217 gr. ± 207 gr. ± 187 gr. ± 179 gr. NPN N.O. ECU1 3016N A3U2 ECU2 3025N A3U2 ECU1 3016N ARU4 ECU2 3025N ARU4 NPN N.C. ECU1 3016N B3U2 ECU2 3025N B3U2 ECU1 3016N BRU4 ECU2 3025N BRU4 PNP N.O. ECU1 3016P A3U2 ECU2 3025P A3U2 ECU1 3016P ARU4 ECU2 3025P ARU4 PNP N.C. ECU1 3016P B3U2 ECU2 3025P B3U2 ECU1 3016P BRU4 ECU2 3025P BRU4 32

37 M30 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Short stainless steel body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 16 mm 25 mm 16 mm 25 mm PBT <1.5 V Switching frequency 500 Hz 150 Hz 500 Hz 150 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 180 gr. ± 111 gr. NPN N.O. ECU1 3016N A3S2 ECU2 3025N A3S2 ECU1 3016N ARS4 ECU2 3025N ARS4 NPN N.C. ECU1 3016N B3S2 ECU2 3025N B3S2 ECU1 3016N BRS4 ECU2 3025N BRS4 PNP N.O. ECU1 3016P A3S2 ECU2 3025P A3S2 ECU1 3016P ARS4 ECU2 3025P ARS4 PNP N.C. ECU1 3016P B3S2 ECU2 3025P B3S2 ECU1 3016P BRS4 ECU2 3025P BRS4 33

38 M30 INDUCTIVE PROXIMITY SWITCH Long sensing distance Nickel plated brass body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 22 mm 40 mm 22 mm 40 mm Nickel plated brass PBT <0.05 ma <2 V Switching frequency 300 Hz 100 Hz 300 Hz 100 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 231 gr. ± 241 gr. ± 147 gr. ± 170 gr. NPN N.O. LCM1 3022N A3U2 LCM2 3040N A3U2 LCM1 3022N ARU4 LCM2 3040N ARU4 NPN N.C. LCM1 3022N B3U2 LCM2 3040N B3U2 LCM1 3022N BRU4 LCM2 3040N BRU4 PNP N.O. LCM1 3022P A3U2 LCM2 3040P A3U2 LCM1 3022P ARU4 LCM2 3040P ARU4 PNP N.C. LCM1 3022P B3U2 LCM2 3040P B3U2 LCM1 3022P BRU4 LCM2 3040P BRU4 34

39 M30 INDUCTIVE PROXIMITY SWITCH Long sensing distance Short nickel plated brass body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 22 mm 40 mm 22 mm 40 mm Nickel plated brass POM <2 V Switching frequency 1 KHz Response time 0.1 ms / 0.1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 180 gr. ± 182 gr. ± 111 gr. ± 121 gr. NPN N.O. LCM1 3022N A3S2 LCM2 3040N A3S2 LCM1 3022N ARS4 LCM2 3040N ARS4 NPN N.C. LCM1 3022N B3S2 LCM2 3040N B3S2 LCM1 3022N BRS4 LCM2 3040N BRS4 PNP N.O. LCM1 3022P A3S2 LCM2 3040P A3S2 LCM1 3022P ARS4 LCM2 3040P ARS4 PNP N.C. LCM1 3022P B3S2 LCM2 3040P B3S2 LCM1 3022P BRS4 LCM2 3040P BRS4 35

40 This page intentionally left blank 36

41 Rectangular Inductive Proximity Switches Q5 Sensors Die cast metal body, side sensing, available in standard and long sensing range Q8 Sensors Die cast metal body, side sensing, available in standard and long sensing range Q12 Sensors Die cast metal body, side sensing, available in standard and long sensing range Q16 Sensors PBT resin body, side sensing, standard sensing range Q17 Sensors ABS resin body, front sensing, standard sensing range Q18 Sensors ABS resin body, front sensing, standard sensing range Q25 Sensors PBT resin body, front sensing, standard sensing range Q30 Sensors PBT resin body, front sensing, standard sensing range Q40 Sensors PBT resin body, front sensing, standard sensing range Q40 Limit Switch Style Sensors PBT resin body, 5 way rotatable sensing head, standard sensing range Q50 Limit Switch Style Sensors PBT resin body, 5 way rotatable sensing head, standard sensing range

42 This page intentionally left blank 38

43 Q5 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Rectangular die cast body Size Q5 Connection Cable 2m (PUR), 3ø 3 x 0.15 M5 connector M8 connector Shielded Non shielded Switching distance Sn mm 0.8 mm Die cast POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 30 gr. ± 30 gr. ± 31 gr. NPN N.O. FQM N A3U2T FQM N A3U0.2T/P5 FQM N A3U0.2T/P8 NPN N.C. FQM N B3U2T FQM N B3U0.2T/P5 FQM N B3U0.2T/P8 PNP N.O. FQM P A3U2T FQM P A3U0.2T/P5 FQM P A3U0.2T/P8 PNP N.C. FQM P B3U2T FQM P B3U0.2T/P5 FQM P B3U0.2T/P8 39

44 Q5 INDUCTIVE PROXIMITY SWITCH Long sensing distance Rectangular die cast body Size Q5 Connection Cable 2m (PUR), 3ø 3 x 0.15 M5 connector M8 connector Shielded Non shielded Switching distance Sn mm 1.5 mm Die cast POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 30 gr. ± 30 gr. ± 31 gr. NPN N.O. LQM N A3U2T LQM N A3U0.2T/P5 LQM N A3U0.2T/P8 NPN N.C. LQM N B3U2T LQM N B3U0.2T/P5 LQM N B3U0.2T/P8 PNP N.O. LQM P A3U2T LQM P A3U0.2T/P5 LQM P A3U0.2T/P8 PNP N.C. LQM P B3U2T LQM P B3U0.2T/P5 LQM P B3U0.2T/P8 40

45 Q8 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Rectangular die cast body Size Q8 Connection Cable 2m (PUR), 3ø 3 x 0.15 Cable 2m (PUR), 3ø 3 x 0.15 M8 connector Shielded Non shielded Switching distance Sn mm 1.5 mm Die cast POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 38 gr. NPN N.O. FQM N A3S2T FQM N A3U2T FQM N ACU3T NPN N.C. FQM N B3S2T FQM N B3U2T FQM N BCU3T PNP N.O. FQM P A3S2T FQM P A3U2T FQM P ACU3T PNP N.C. FQM P B3S2T FQM P B3U2T FQM P BCU3T 41

46 Q8 INDUCTIVE PROXIMITY SWITCH Long sensing distance Rectangular die cast body Size Q8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector Shielded Non shielded Switching distance Sn mm 3 mm Die cast POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 38 gr. NPN N.O. LQM1 8803N A3U2T LQM1 8803N ACU3T NPN N.C. LQM1 8803N B3U2T LQM1 8803N BCU3T PNP N.O. LQM1 8803P A3U2T LQM1 8803P ACU3T PNP N.C. LQM1 8803P B3U2T LQM1 8803P BCU3T 42

47 Q12 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Rectangular die cast body Size Q12 Connection Cable 2m (PUR), 4ø 3 x 0.15 Cable 2m (PUR), 4ø 3 x 0.15 M8 connector Shielded Non shielded Switching distance Sn mm 2 mm Die cast POM <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 70 gr. ± 75 gr. ± 38 gr. NPN N.O. FQM1 1202N A3S2T FQM1 1202N A3U2T FQM1 1202N ACU3T NPN N.C. FQM1 1202N B3S2T FQM1 1202N B3U2T FQM1 1202N BCU3T PNP N.O. FQM1 1202P A3S2T FQM1 1202P A3U2T FQM1 1202P ACU3T PNP N.C. FQM1 1202P B3S2T FQM1 1202P B3U2T FQM1 1202P BCU3T 43

48 Q12 INDUCTIVE PROXIMITY SWITCH Long sensing distance Rectangular die cast body Size Q12 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector Shielded Non shielded Switching distance Sn mm 6 mm Die cast POM <2 V Switching frequency 1 KHz Response time 0.1 ms / 0.1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 75 gr. ± 38 gr. NPN N.O. LQM1 1206N A3U2T LQM1 1206N ACU3T NPN N.C. LQM1 1206N B3U2T LQM1 1206N BCU3T PNP N.O. LQM1 1206P A3U2T LQM1 1206P ACU3T PNP N.C. LQM1 1206P B3U2T LQM1 1206P BCU3T 44

49 Q16 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Rectangular PBT resin body Size 28x16x10 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector Shielded Non shielded Switching distance Sn mm 1 mm 2 mm 1 mm 2 mm PBT Resin <1.5 V Switching frequency 2 KHz Response time 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 55 gr. ± 30 gr. NPN N.O. FQP1 2801N A3U2 FQP2 2802N A3U2 FQP1 2801N ACU3 FQP2 2802N ACU3 NPN N.C. FQP1 2801N B3U2 FQP2 2802N B3U2 FQP1 2801N BCU3 FQP2 2802N BCU3 PNP N.O. FQP1 2801P A3U2 FQP2 2802P A3U2 FQP1 2801P ACU3 FQP2 2802P ACU3 PNP N.C. FQP1 2801P B3U2 FQP2 2802P B3U2 FQP1 2801P BCU3 FQP2 2802P BCU3 45

50 Q17 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Rectangular ABS resin body Q17 Connection Cable 2m (PUR), 4ø 3 x 0.15 Shielded Non shielded Switching distance Sn mm 4 mm ABS Resin ABS <1.5 V Switching frequency 500 Hz Response time 0.5 ms / 0.5 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 55 gr. NPN N.O. FQP2 1604N A3U2 NPN N.C. FQP2 1604N B3U2 PNP N.O. FQP2 1604P A3U2 PNP N.C. FQP2 1604P B3U2 46

51 Q18 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Rectangular ABS resin body Q18 Connection Cable 2m (PUR), 4ø 3 x 0.15 Shielded Non shielded Switching distance Sn mm 4 mm ABS Resin ABS <1.5 V Switching frequency 500 Hz Response time 0.5 ms / 0.5 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 58 gr. NPN N.O. FQP2 1804N A3U2 NPN N.C. FQP2 1804N B3U2 PNP N.O. FQP2 1804P A3U2 PNP N.C. FQP2 1804P B3U2 47

52 Q25 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Rectangular PBT resin body Size Q25 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 6 mm PBT Resin <1.5 V Switching frequency 300 Hz Response time 0.5 ms / 0.5 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 110 gr. ± 80 gr. NPN N.O. FQP1 2510N A3S2F FQP1 2510N ARS4F NPN N.C. FQP1 2510N B3S2F FQP1 2510N BRS4F PNP N.O. FQP1 2510P A3S2F FQP1 2510P ARS4F PNP N.C. FQP1 2510P B3S2F FQP1 2510P BRS4F 48

53 Q30 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Rectangular PBT resin body Size Q30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 10 mm 15 mm 10 mm 15 mm PBT Resin PBT <1.5 V Switching frequency 100 Hz Response time 1 ms / 1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 155 gr. ± 120 gr. NPN N.O. FQP1 3010N A3U2F FQP2 3015N A3U2F FQP1 3010N ARU4F FQP2 3015N ARU4F NPN N.C. FQP1 3010N B3U2F FQP2 3015N B3U2F FQP1 3010N BRU4F FQP2 3015N BRU4F PNP N.O. FQP1 3010P A3U2F FQP2 3015P A3U2F FQP1 3010P ARU4F FQP2 3015P ARU4F PNP N.C. FQP1 3010P B3U2F FQP2 3015P B3U2F FQP1 3010P BRU4F FQP2 3015P BRU4F 49

54 Q40 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Rectangular PBT resin body Size Q40 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 15 mm 30 mm 15 mm 30 mm PBT Resin PBT <1.5 V Switching frequency 100 Hz Response time 1 ms / 1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 190 gr. ± 155 gr. NPN N.O. FQP1 4515N A3U2F FQP2 4530N A3U2F FQP1 4515N ARU4F FQP2 4530N ARU4F NPN N.C. FQP1 4515N B3U2F FQP2 4530N B3U2F FQP1 4515N BRU4F FQP2 4530N BRU4F PNP N.O. FQP1 4515P A3U2F FQP2 4530P A3U2F FQP1 4515P ARU4F FQP2 4530P ARU4F PNP N.C. FQP1 4515P B3U2F FQP2 4530P B3U2F FQP1 4515P BRU4F FQP2 4530P BRU4F 50

55 Q40 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Limit switch style body 5 Way rotatable sensing head Q40 Connection Screw terminals M12 connector Shielded Non shielded Switching distance Sn mm 15 mm 20 mm 30 mm 15 mm 20 mm 30 mm PBT Resin PBT With LED Without LED <1.5 V Switching frequency 100 Hz Response time 1 ms / 1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 242 gr. ± 250 gr. NPN N.O. FQP1 4015N A3U FQP2 4020N A3U FQP2 4030N A3U FQP1 4015N ARU4 FQP2 4020N ARU4 FQP2 4030N ARU4 NPN N.C. FQP1 4015N B3U FQP2 4020N B3U FQP2 4030N B3U FQP1 4015N BRU4 FQP2 4020N BRU4 FQP2 4030N BRU4 PNP N.O. FQP1 4015P A3U FQP2 4020P A3U FQP2 4030P A3U FQP1 4015P ARU4 FQP2 4020P ARU4 FQP2 4030P ARU4 PNP N.C. FQP1 4015P B3U FQP2 4020P B3U FQP2 4030P B3U FQP1 4015P BRU4 FQP2 4020P BRU4 FQP2 4030P BRU4 51

56 Q50 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Limit switch style body 5 Way rotatable sensing head Size Q50 Connection Screw terminals M12 connector Shielded Non shielded Switching distance Sn mm 40 mm 40 mm PBT Resin PBT <1.5 V Switching frequency 100 Hz Response time 1 ms / 1 ms <2% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 450 gr. ± 450 gr. NPN N.O. FQP2 5040N A3U FQP2 5040N ARU4 NPN N.C. FQP2 5040N B3U FQP2 5040N BRU4 PNP N.O. FQP2 5040P A3U FQP2 5040P ARU4 PNP N.C. FQP2 5040P B3U FQP2 5040P BRU4 52

57 Cylindrical Inductive Proximity Switches with Full Metal Body M8 Sensors body and sensing head, standard or short length body Available in standard, extended and long sensing ranges M12 Sensors body and sensing head, standard or short length body Available in standard, extended and long sensing ranges M18 Sensors body and sensing head, standard or short length body Available in standard, extended and long sensing ranges M30 Sensors body and sensing head, standard or short length body Available in standard, extended and long sensing ranges

58 This page intentionally left blank 54

59 M8 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Full stainless steel body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 1 mm 2 mm 1 mm 2 mm 1 mm 2 mm 55 Switching frequency Response time RFI>3V/m / EFT>1KV / ESD>4KV(contact) <1.5 V 2 KHz 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 33 gr. ± 32 gr. ± 18 gr. ± 17 gr. ± 22 gr. ± 22 gr. NPN N.O. FCS1 0801N A3U2 FCS2 0802N A3U2 FCS1 0801N ACU3 FCS2 0802N ACU3 FCS1 0801N ARU4 FCS2 0802N ARU4 NPN N.C. FCS1 0801N B3U2 FCS2 0802N B3U2 FCS1 0801N BCU3 FCS2 0802N BCU3 FCS1 0801N BRU4 FCS2 0802N BRU4 PNP N.O. FCS1 0801P A3U2 FCS2 0802P A3U2 FCS1 0801P ACU3 FCS2 0802P ACU3 FCS1 0801P ARU4 FCS2 0802P ARU4 PNP N.C. FCS1 0801P B3U2 FCS2 0802P B3U2 FCS1 0801P BCU3 FCS2 0802P BCU3 FCS1 0801P BRU4 FCS2 0802P BRU4

60 M8 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Short full stainless steel body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 1 mm 2 mm 1 mm 2 mm 1 mm 2 mm 56 Switching frequency Response time RFI>3V/m / EFT>1KV / ESD>4KV(contact) <1.5 V 2 KHz 0.1 ms / 0.1 ms <1% (Sr) RFI>20V/m / EFT>1KV / ESD>8KV(contact) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 33 gr. ± 32 gr. ± 12 gr. ± 12 gr. ± 17 gr. ± 17 gr. NPN N.O. FCS1 0801N A3S2 FCS2 0802N A3S2 FCS1 0801N ACS3 FCS2 0802N ACS3 FCS1 0801N ARS4 FCS2 0802N ARS4 NPN N.C. FCS1 0801N B3S2 FCS2 0802N B3S2 FCS1 0801N BCS3 FCS2 0802N BCS3 FCS1 0801N BRS4 FCS2 0802N BRS4 PNP N.O. FCS1 0801P A3S2 FCS2 0802P A3S2 FCS1 0801P ACS3 FCS2 0802P ACS3 FCS1 0801P ARS4 FCS2 0802P ARS4 PNP N.C. FCS1 0801P B3S2 FCS2 0802P B3S2 FCS1 0801P BCS3 FCS2 0802P BCS3 FCS1 0801P BRS4 FCS2 0802P BRS4

61 M8 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Full stainless steel body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 2 mm 4 mm 2 mm 4 mm 2 mm 4 mm 57 Switching frequency 2 KHz 1 KHz 2 KHz 1 KHz 2 KHz 1 KHz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) <1.5 V <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 33 gr. ± 32 gr. ± 18 gr. ± 17 gr. ± 22 gr. ± 22 gr. NPN N.O. ECS1 0802N A3U2 ECS2 0804N A3U2 ECS1 0802N ACU3 ECS2 0804N ACU3 ECS1 0802N ARU4 ECS2 0804N ARU4 NPN N.C. ECS1 0802N B3U2 ECS2 0804N B3U2 ECS1 0802N BCU3 ECS2 0804N BCU3 ECS1 0802N BRU4 ECS2 0804N BRU4 PNP N.O. ECS1 0802P A3U2 ECS2 0804P A3U2 ECS1 0802P ACU3 ECS2 0804P ACU3 ECS1 0802P ARU4 ECS2 0804P ARU4 PNP N.C. ECS1 0802P B3U2 ECS2 0804P B3U2 ECS1 0802P BCU3 ECS2 0804P BCU3 ECS1 0802P BRU4 ECS2 0804P BRU4

62 M8 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Short full stainless steel body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 2 mm 4 mm 2 mm 4 mm 2 mm 4 mm 58 Switching frequency 2 KHz 1 KHz 2 KHz 1 KHz 2 KHz 1 KHz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) <1.5 V <1% (Sr) RFI>20V/m / EFT>1KV / ESD>8KV(contact) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 33 gr. ± 32 gr. ± 12 gr. ± 12 gr. ± 17 gr. ± 17 gr. NPN N.O. ECS1 0802N A3S2 ECS2 0804N A3S2 ECS1 0802N ACS3 ECS2 0804N ACS3 ECS1 0802N ARS4 ECS2 0804N ARS4 NPN N.C. ECS1 0802N B3S2 ECS2 0804N B3S2 ECS1 0802N BCS3 ECS2 0804N BCS3 ECS1 0802N BRS4 ECS2 0804N BRS4 PNP N.O. ECS1 0802P A3S2 ECS2 0804P A3S2 ECS1 0802P ACS3 ECS2 0804P ACS3 ECS1 0802P ARS4 ECS2 0804P ARS4 PNP N.C. ECS1 0802P B3S2 ECS2 0804P B3S2 ECS1 0802P BCS3 ECS2 0804P BCS3 ECS1 0802P BRS4 ECS2 0804P BRS4

63 M8 INDUCTIVE PROXIMITY SWITCH Long sensing distance Full stainless steel body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 3 mm 6 mm 3 mm 6 mm 3 mm 6 mm 59 Switching frequency Response time RFI>3V/m / EFT>1KV / ESD>4KV(contact) <1.5 V 500 Hz 0.1 ms / 0.1 ms <1% (Sr) RFI>3V/m / EFT>1KV / ESD>4KV(contact) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 33 gr. ± 32 gr. ± 18 gr. ± 17 gr. ± 22 gr. ± 22 gr. NPN N.O. LCS1 0803N A3U2 LCS2 0806N A3U2 LCS1 0803N ACU3 LCS2 0806N ACU3 LCS1 0803N ARU4 LCS2 0806N ARU4 NPN N.C. LCS1 0803N B3U2 LCS2 0806N B3U2 LCS1 0803N BCU3 LCS2 0806N BCU3 LCS1 0803N BRU4 LCS2 0806N BRU4 PNP N.O. LCS1 0803P A3U2 LCS2 0806P A3U2 LCS1 0803P ACU3 LCS2 0806P ACU3 LCS1 0803P ARU4 LCS2 0806P ARU4 PNP N.C. LCS1 0803P B3U2 LCS2 0806P B3U2 LCS1 0803P BCU3 LCS2 0806P BCU3 LCS1 0803P BRU4 LCS2 0806P BRU4

64 M8 INDUCTIVE PROXIMITY SWITCH Long sensing distance Short full stainless steel body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 3 mm 6 mm 3 mm 6 mm 3 mm 6 mm 60 Switching frequency Response time RFI>3V/m / EFT>1KV / ESD>4KV(contact) <1.5 V 1 KHz 0.1 ms / 0.1 ms <1% (Sr) RFI>20V/m / EFT>1KV / ESD>8KV(contact) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 33 gr. ± 32 gr. ± 12 gr. ± 12 gr. ± 17 gr. ± 17 gr. NPN N.O. LCS1 0803N A3S2 LCS2 0806N A3S2 LCS1 0803N ACS3* LCS2 0806N ACS3* LCS1 0803N ARS4* LCS2 0806N ARS4* NPN N.C. LCS1 0803N B3S2 LCS2 0806N B3S2 LCS1 0803N BCS3* LCS2 0806N BCS3* LCS1 0803N BRS4* LCS2 0806N BRS4* PNP N.O. LCS1 0803P A3S2 LCS2 0806P A3S2 LCS1 0803P ACS3* LCS2 0806P ACS3* LCS1 0803P ARS4* LCS2 0806P ARS4* PNP N.C. LCS1 0803P B3S2 LCS2 0806P B3S2 LCS1 0803P BCS3* LCS2 0806P BCS3* LCS1 0803P BRS4* LCS2 0806P BRS4* *Under development

65 M12 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Full stainless steel body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 2 mm 4 mm 2 mm 4 mm <1.5 V Switching frequency 2 KHz 1 KHz 2 KHz 1 KHz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <1% (Sr) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 67 gr. ± 65 gr. ± 31 gr. ± 30 gr. NPN N.O. FCS1 1202N A3U2 FCS2 1204N A3U2 FCS1 1202N ARU4 FCS2 1204N ARU4 NPN N.C. FCS1 1202N B3U2 FCS2 1204N B3U2 FCS1 1202N BRU4 FCS2 1204N BRU4 PNP N.O. FCS1 1202P A3U2 FCS2 1204P A3U2 FCS1 1202P ARU4 FCS2 1204P ARU4 PNP N.C. FCS1 1202P B3U2 FCS2 1204P B3U2 FCS1 1202P BRU4 FCS2 1204P BRU4 61

66 M12 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Short full stainless steel body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 2 mm 4 mm 2 mm 4 mm <1.5 V Switching frequency 2 KHz 1 KHz 2 KHz 1 KHz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <1% (Sr) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 62 gr. ± 60 gr. ± 25 gr. ± 23 gr. NPN N.O. FCS1 1202N A3S2 FCS2 1204N A3S2 FCS1 1202N ARS4 FCS2 1204N ARS4 NPN N.C. FCS1 1202N B3S2 FCS2 1204N B3S2 FCS1 1202N BRS4 FCS2 1204N BRS4 PNP N.O. FCS1 1202P A3S2 FCS2 1204P A3S2 FCS1 1202P ARS4 FCS2 1204P ARS4 PNP N.C. FCS1 1202P B3S2 FCS2 1204P B3S2 FCS1 1202P BRS4 FCS2 1204P BRS4 62

67 M12 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Full stainless steel body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 4 mm 8 mm 4 mm 8 mm <1.5 V Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms <1% (Sr) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 67 gr. ± 65 gr. ± 31 gr. ± 30 gr. NPN N.O. ECS1 1204N A3U2 ECS2 1208N A3U2 ECS1 1204N ARU4 ECS2 1208N ARU4 NPN N.C. ECS1 1204N B3U2 ECS2 1208N B3U2 ECS1 1204N BRU4 ECS2 1208N BRU4 PNP N.O. ECS1 1204P A3U2 ECS2 1208P A3U2 ECS1 1204P ARU4 ECS2 1208P ARU4 PNP N.C. ECS1 1204P B3U2 ECS2 1208P B3U2 ECS1 1204P BRU4 ECS2 1208P BRU4 63

68 M12 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Short full stainless steel body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 4 mm 8 mm 4 mm 8 mm <1.5 V Switching frequency 1 KHz 500 HZ 1 KHz 500 HZ Response time 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms <1% (Sr) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 62 gr. ± 60 gr. ± 25 gr. ± 23 gr. NPN N.O. ECS1 1204N A3S2 ECS2 1208N A3S2 ECS1 1204N ARS4 ECS2 1208N ARS4 NPN N.C. ECS1 1204N B3S2 ECS2 1208N B3S2 ECS1 1204N BRS4 ECS2 1208N BRS4 PNP N.O. ECS1 1204P A3S2 ECS2 1208P A3S2 ECS1 1204P ARS4 ECS2 1208P ARS4 PNP N.C. ECS1 1204P B3S2 ECS2 1208P B3S2 ECS1 1204P BRS4 ECS2 1208P BRS4 64

69 M12 INDUCTIVE PROXIMITY SWITCH Long sensing distance Full stainless steel body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 6 mm 10 mm 6 mm 10 mm <1.5 V Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <1% (Sr) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 67 gr. ± 65 gr. ± 31 gr. ± 30 gr. NPN N.O. LCS1 1206N A3U2 LCS2 1210N A3U2 LCS1 1206N ARU4 LCS2 1210N ARU4 NPN N.C. LCS1 1206N B3U2 LCS2 1210N B3U2 LCS1 1206N BRU4 LCS2 1210N BRU4 PNP N.O. LCS1 1206P A3U2 LCS2 1210P A3U2 LCS1 1206P ARU4 LCS2 1210P ARU4 PNP N.C. LCS1 1206P B3U2 LCS2 1210P B3U2 LCS1 1206P BRU4 LCS2 1210P BRU4 65

70 M12 INDUCTIVE PROXIMITY SWITCH Long sensing distance Short full stainless steel body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 6 mm 10 mm 6 mm 10 mm <1.5 V Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms 0.1 ms / 0.1 ms 0.2 ms / 0.2 ms <1% (Sr) RFI>20V/m / EFT>1KV / ESD>8KV(contact) Weight ± 62 gr. ± 60 gr. ± 25 gr. ± 23 gr. NPN N.O. LCS1 1206N A3S2 LCS2 1210N A3S2 LCS1 1206N ARS4 LCS2 1210N ARS4 NPN N.C. LCS1 1206N B3S2 LCS2 1210N B3S2 LCS1 1206N BRS4 LCS2 1210N BRS4 PNP N.O. LCS1 1206P A3S2 LCS2 1210P A3S2 LCS1 1206P ARS4 LCS2 1210P ARS4 PNP N.C. LCS1 1206P B3S2 LCS2 1210P B3S2 LCS1 1206P BRS4 LCS2 1210P BRS4 66

71 M18 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Full stainless steel body M18 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 5 mm 8 mm 5 mm 8 mm <1.5 V Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 153 gr. ± 144 gr. ± 94 gr. ± 91 gr. NPN N.O. FCS1 1805N A3U2 FCS2 1808N A3U2 FCS1 1805N ARU4 FCS2 1808N ARU4 NPN N.C. FCS1 1805N B3U2 FCS2 1808N B3U2 FCS1 1805N BRU4 FCS2 1808N BRU4 PNP N.O. FCS1 1805P A3U2 FCS2 1808P A3U2 FCS1 1805P ARU4 FCS2 1808P ARU4 PNP N.C. FCS1 1805P B3U2 FCS2 1808P B3U2 FCS1 1805P BRU4 FCS2 1808P BRU4 67

72 M18 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Short full stainless steel body M18 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 5 mm 8 mm 5 mm 8 mm <1.5 V Switching frequency 1 KHz 500 Hz 1 KHz 500 Hz Response time 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms 0.2 ms / 0.2 ms 0.5 ms / 0.5 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 132 gr. ± 134 gr. ± 50 gr. ± 50 gr. NPN N.O. FCS1 1805N A3S2 FCS2 1808N A3S2 FCS1 1805N ARS4 FCS2 1808N ARS4 NPN N.C. FCS1 1805N B3S2 FCS2 1808N B3S2 FCS1 1805N BRS4 FCS2 1808N BRS4 PNP N.O. FCS1 1805P A3S2 FCS2 1808P A3S2 FCS1 1805P ARS4 FCS2 1808P ARS4 PNP N.C. FCS1 1805P B3S2 FCS2 1808P B3S2 FCS1 1805P BRS4 FCS2 1808P BRS4 68

73 M18 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Full stainless steel body M18 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 8 mm 16 mm 8 mm 16 mm <1.5 V Switching frequency 500 Hz 150 Hz 500 Hz 150 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 153 gr. ± 144 gr. ± 94 gr. ± 91 gr. NPN N.O. ECS1 1808N A3U2 ECS2 1816N A3U2 ECS1 1808N ARU4 ECS2 1816N ARU4 NPN N.C. ECS1 1808N B3U2 ECS2 1816N B3U2 ECS1 1808N BRU4 ECS2 1816N BRU4 PNP N.O. ECS1 1808P A3U2 ECS2 1816P A3U2 ECS1 1808P ARU4 ECS2 1816P ARU4 PNP N.C. ECS1 1808P B3U2 ECS2 1816P B3U2 ECS1 1808P BRU4 ECS2 1816P BRU4 69

74 M18 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Short full stainless steel body M18 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 8 mm 16 mm 8 mm 16 mm <1.5 V Switching frequency 500 Hz 150 Hz 500 Hz 150 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 132 gr. ± 134 gr. ± 50 gr. ± 50 gr. NPN N.O. ECS1 1808N A3S2 ECS2 1816N A3S2 ECS1 1808N ARS4 ECS2 1816N ARS4 NPN N.C. ECS1 1808N B3S2 ECS2 1816N B3S2 ECS1 1808N BRS4 ECS2 1816N BRS4 PNP N.O. ECS1 1808P A3S2 ECS2 1816P A3S2 ECS1 1808P ARS4 ECS2 1816P ARS4 PNP N.C. ECS1 1808P B3S2 ECS2 1816P B3S2 ECS1 1808P BRS4 ECS2 1816P BRS4 70

75 M18 INDUCTIVE PROXIMITY SWITCH Long sensing distance Full stainless steel body M18 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 12 mm 20 mm 12 mm 20 mm <1.5 V Switching frequency 300 Hz 100 Hz 300 Hz 100 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 153 gr. ± 144 gr. ± 94 gr. ± 91 gr. NPN N.O. LCS1 1812N A3U2 LCS2 1820N A3U2 LCS1 1812N ARU4 LCS2 1820N ARU4 NPN N.C. LCS1 1812N B3U2 LCS2 1820N B3U2 LCS1 1812N BRU4 LCS2 1820N BRU4 PNP N.O. LCS1 1812P A3U2 LCS2 1820P A3U2 LCS1 1812P ARU4 LCS2 1820P ARU4 PNP N.C. LCS1 1812P B3U2 LCS2 1820P B3U2 LCS1 1812P BRU4 LCS2 1820P BRU4 71

76 M18 INDUCTIVE PROXIMITY SWITCH Long sensing distance Short full stainless steel body M18 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 12 mm 20 mm 12 mm 20 mm <1.5 V Switching frequency 300 Hz 100 Hz 300 Hz 100 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 132 gr. ± 134 gr. ± 50 gr. ± 50 gr. NPN N.O. LCS1 1812N A3S2 LCS2 1820N A3S2 LCS1 1812N ARS4 LCS2 1820N ARS4 NPN N.C. LCS1 1812N B3S2 LCS2 1820N B3S2 LCS1 1812N BRS4 LCS2 1820N BRS4 PNP N.O. LCS1 1812P A3S2 LCS2 1820P A3S2 LCS1 1812P ARS4 LCS2 1820P ARS4 PNP N.C. LCS1 1812P B3S2 LCS2 1820P B3S2 LCS1 1812P BRS4 LCS2 1820P BRS4 72

77 M30 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Full stainless steel body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 10 mm 15 mm 10 mm 15 mm <1.5 V Switching frequency 300 Hz 150 Hz 300 Hz 150 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 217 gr. ± 207 gr. ± 187 gr. ± 179 gr. NPN N.O. FCS1 3010N A3U2 FCS2 3015N A3U2 FCS1 3010N ARU4 FCS2 3015N ARU4 NPN N.C. FCS1 3010N B3U2 FCS2 3015N B3U2 FCS1 3010N BRU4 FCS2 3015N BRU4 PNP N.O. FCS1 3010P A3U2 FCS2 3015P A3U2 FCS1 3010P ARU4 FCS2 3015P ARU4 PNP N.C. FCS1 3010P B3U2 FCS2 3015P B3U2 FCS1 3010P BRU4 FCS2 3015P BRU4 73

78 M30 INDUCTIVE PROXIMITY SWITCH Standard sensing distance Short full stainless steel body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 10 mm 15 mm 10 mm 15 mm <1.5 V Switching frequency 300 Hz 150 Hz 300 Hz 150 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 180 gr. ± 182 gr. ± 111 gr. ± 121 gr. NPN N.O. FCS1 3010N A3S2 FCS2 3015N A3S2 FCS1 3010N ARS4 FCS2 3015N ARS4 NPN N.C. FCS1 3010N B3S2 FCS2 3015N B3S2 FCS1 3010N BRS4 FCS2 3015N BRS4 PNP N.O. FCS1 3010P A3S2 FCS2 3015P A3S2 FCS1 3010P ARS4 FCS2 3015P ARS4 PNP N.C. FCS1 3010P B3S2 FCS2 3015P B3S2 FCS1 3010P BRS4 FCS2 3015P BRS4 74

79 M30 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Full stainless steel body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 16 mm 25 mm 16 mm 25 mm <1.5 V Switching frequency 150 Hz 100 Hz 150 Hz 100 Hz Response time 1 ms / 1 ms 1 ms / 1 ms 1 ms / 1 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 217 gr. ± 207 gr. ± 187 gr. ± 179 gr. NPN N.O. ECS1 3016N A3U2 ECS2 3025N A3U2 ECS1 3016N ARU4 ECS2 3025N ARU4 NPN N.C. ECS1 3016N B3U2 ECS2 3025N B3U2 ECS1 3016N BRU4 ECS2 3025N BRU4 PNP N.O. ECS1 3016P A3U2 ECS2 3025P A3U2 ECS1 3016P ARU4 ECS2 3025P ARU4 PNP N.C. ECS1 3016P B3U2 ECS2 3025P B3U2 ECS1 3016P BRU4 ECS2 3025P BRU4 75

80 M30 INDUCTIVE PROXIMITY SWITCH Extended sensing distance Short full stainless steel body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 16 mm 25 mm 16 mm 25 mm <1.5 V Switching frequency 150 Hz 100 Hz 150 Hz 100 Hz Response time 1 ms / 1 ms 1 ms / 1 ms 1 ms / 1 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 180 gr. ± 182 gr. ± 111 gr. ± 121 gr. NPN N.O. ECS1 3016N A3S2 ECS2 3025N A3S2 ECS1 3016N ARS4 ECS2 3025N ARS4 NPN N.C. ECS1 3016N B3S2 ECS2 3025N B3S2 ECS1 3016N BRS4 ECS2 3025N BRS4 PNP N.O. ECS1 3016P A3S2 ECS2 3025P A3S2 ECS1 3016P ARS4 ECS2 3025P ARS4 PNP N.C. ECS1 3016P B3S2 ECS2 3025P B3S2 ECS1 3016P BRS4 ECS2 3025P BRS4 76

81 M30 INDUCTIVE PROXIMITY SWITCH Long sensing distance Full stainless steel body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 20 mm 40 mm 20 mm 40 mm <1.5 V Switching frequency 300 Hz 100 Hz 300 Hz 100 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 217 gr. ± 207 gr. ± 187 gr. ± 179 gr. NPN N.O. LCS1 3020N A3U2 LCS2 3040N A3U2 LCS1 3020N ARU4 LCS2 3040N ARU4 NPN N.C. LCS1 3020N B3U2 LCS2 3040N B3U2 LCS1 3020N BRU4 LCS2 3040N BRU4 PNP N.O. LCS1 3020P A3U2 LCS2 3040P A3U2 LCS1 3020P ARU4 LCS2 3040P ARU4 PNP N.C. LCS1 3020P B3U2 LCS2 3040P B3U2 LCS1 3020P BRU4 LCS2 3040P BRU4 77

82 M30 INDUCTIVE PROXIMITY SWITCH Long sensing distance Short full stainless steel body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 20 mm 40 mm 20 mm 40 mm <1.5 V Switching frequency 300 Hz 100 Hz 300 Hz 100 Hz Response time 0.5 ms / 0.5 ms 1 ms / 1 ms 0.5 ms / 0.5 ms 1 ms / 1 ms <1% (Sr) RFI>10V/m / EFT>1KV / ESD>8KV(contact) Weight ± 180 gr. ± 182 gr. ± 111 gr. ± 121 gr. NPN N.O. LCS1 3020N A3S2 LCS2 3040N A3S2 LCS1 3020N ARS4 LCS2 3040N ARS4 NPN N.C. LCS1 3020N B3S2 LCS2 3040N B3S2 LCS1 3020N BRS4 LCS2 3040N BRS4 PNP N.O. LCS1 3020P A3S2 LCS2 3040P A3S2 LCS1 3020P ARS4 LCS2 3040P ARS4 PNP N.C. LCS1 3020P B3S2 LCS2 3040P B3S2 LCS1 3020P BRS4 LCS2 3040P BRS4 78

83 Cylindrical Inductive Proximity Sensors with Analog Output M8 Sensors Available with either 0 10V voltage output or 0 20mA current output M12 Sensors Available with either 0 10V voltage output or 0 20mA current output M18 Sensors Available with either 0 10V voltage output or 0 20mA current output M30 Sensors Available with either 0 10V voltage output or 0 20mA current output

84 This page intentionally left blank 80

85 M8 INDUCTIVE PROXIMITY SENSOR Analog sensor with current output Nickel plated brass body M8 Connection Cable 2m (PVC) M8 connector Cable 2m (PVC) M8 connector Shielded Non shielded Switching distance Sn mm mm mm Nickel plated brass PBT With LED Without LED VDC <35 ma Output Current/Load resistance 4 20 ma / 400 Max. Linearity <5% (Sr) 0.02 mm Ambient temperature 0 o C to +50 o C <5% (Sr) No Reverse polarity protection Output signal PNP Analog Switching frequency 100 Hz Max. RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 40 gr. ± 15 gr. ± 40 gr. ± 15 gr. Inductive Current output FCM G I3U2 FCM G ICU3 FCM G I3U2 FCM G ICU3 81

86 M8 INDUCTIVE PROXIMITY SENSOR Analog sensor with voltage output Nickel plated brass body M8 Connection Cable 2m (PVC) M8 connector Cable 2m (PVC) M8 connector Shielded Non shielded Switching distance Sn mm mm mm Nickel plated brass PBT With LED Without LED VDC <35 ma Output Voltage/Load resistance 0 10 VDC / 2 k Linearity <5% (Sr) 0.02 mm Ambient temperature 0 o C to +70 o C <5% (Sr) No Reverse polarity protection Output signal PNP Analog Switching frequency 100 Hz Max. RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 40 gr. ± 15 gr. ± 40 gr. ± 15 gr. Inductive Voltage output FCM G V3U2 FCM G VCU3 FCM G V3U2 FCM G VCU3 82

87 M12 INDUCTIVE PROXIMITY SENSOR Analog sensor with current output Nickel plated brass body M12 Connection Cable 2m (PVC) M12 connector Cable 2m (PVC) M12 connector Shielded Non shielded Switching distance Sn mm mm mm Nickel plated brass PBT With LED Without LED VDC <35 ma Output Current/Load resistance 4 20 ma / 400 Max. Linearity <5% (Sr) 0.02 mm Ambient temperature 0 o C to +50 o C <5% (Sr) No Reverse polarity protection Output signal PNP Analog Switching frequency 100 Hz Max. RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 67 gr. ± 30 gr. ± 67 gr. ± 30 gr. Inductive Current output FCM1 1203G I3U2 FCM1 1203G IRU4 FCM2 1204G I3U2 FCM2 1204G IRU4 83

88 M12 INDUCTIVE PROXIMITY SENSOR Analog sensor with voltage output Nickel plated brass body M12 Connection Cable 2m (PVC) M12 connector Cable 2m (PVC) M12 connector Shielded Non shielded Switching distance Sn mm mm mm Nickel plated brass PBT With LED Without LED VDC <35 ma Output Voltage/Load resistance 0 10 VDC / 2 k Linearity <5% (Sr) 0.02 mm Ambient temperature 0 o C to +70 o C <5% (Sr) No Reverse polarity protection Output signal PNP Analog Switching frequency 100 Hz Max. RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 67 gr. ± 30 gr. ± 67 gr. ± 30 gr. Inductive Voltage output FCM1 1203G V3U2 FCM1 1203G VRU4 FCM2 1204G V3U2 FCM2 1204G VRU4 84

89 M18 INDUCTIVE PROXIMITY SENSOR Analog sensor with current output Nickel plated brass body M18 Connection Cable 2m (PVC) M12 connector Cable 2m (PVC) M12 connector Shielded Non shielded Switching distance Sn mm mm mm Nickel plated brass PBT With LED Without LED VDC <15 ma Output Current/Load resistance 0 20 ma / 200 Max. Linearity 0.02 mm Ambient temperature 0 o C to +70 o C <5% (Sr) No Reverse polarity protection Output signal PNP Analog Switching frequency 100 Hz Max. RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 142 gr. ± 69 gr. ± 142 gr. ± 69 gr. Inductive Current output FCM1 1804G I3U2 FCM1 1804G IRU4 FCM2 1807G I3U2 FCM2 1807G IRU4 85

90 M18 INDUCTIVE PROXIMITY SENSOR Analog sensor with voltage output Nickel plated brass body M18 Connection Cable 2m (PVC) M12 connector Cable 2m (PVC) M12 connector Shielded Non shielded Switching distance Sn mm mm mm Nickel plated brass PBT With LED Without LED VDC <15 ma Output Voltage/Load resistance 0 10 VDC / >=4.7 k Linearity 0.02 mm Ambient temperature 0 o C to +70 o C <5% (Sr) No Reverse polarity protection Output signal PNP Analog Switching frequency 100 Hz Max. RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 142 gr. ± 69 gr. ± 142 gr. ± 69 gr. Inductive Voltage output FCM1 1804G V3U2 FCM1 1804G VRU4 FCM2 1807G V3U2 FCM2 1807G VRU4 86

91 M30 INDUCTIVE PROXIMITY SENSOR Analog sensor with current output Nickel plated brass body M30 Connection Cable 2m (PVC) M12 connector Cable 2m (PVC) M12 connector Shielded Non shielded Switching distance Sn mm mm mm Nickel plated brass PBT With LED Without LED VDC <15 ma Output Current/Load resistance 0 20 ma / 200 Max. Linearity 0.02 mm Ambient temperature 0 o C to +70 o C <5% (Sr) No Reverse polarity protection Output signal PNP Analog Switching frequency 100 Hz Max. RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 252 gr. ± 187 gr. ± 252 gr. ± 187 gr. Inductive Current output FCM1 3010G I3U2 FCM1 3010G IRU4 FCM2 3014G I3U2 FCM2 3014G IRU4 87

92 M30 INDUCTIVE PROXIMITY SENSOR Analog sensor with voltage output Nickel plated brass body M30 Connection Cable 2m (PVC) M12 connector Cable 2m (PVC) M12 connector Shielded Non shielded Switching distance Sn mm mm mm Nickel plated brass PBT With LED Without LED VDC <15 ma Output Voltage/Load resistance 0 10 VDC / >=4.7 k Linearity 0.02 mm Ambient temperature 0 o C to +70 o C <5% (Sr) No Reverse polarity protection Output signal PNP Analog Switching frequency 100 Hz Max. RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 252 gr. ± 187 gr. ± 252 gr. ± 187 gr. Inductive Voltage output FCM1 3010G V3U2 FCM1 3010G VRU4 FCM2 3014G V3U2 FCM2 3014G VRU4 88

93 Cylindrical Capacitive Proximity Switches M8 Sensors Nickel plated brass body M12 Sensors PBT resin, nickel plated brass or stainless steel body M18 Sensors PBT resin, nickel plated brass or stainless steel body M30 Sensors PBT resin, nickel plated brass or stainless steel body

94 This page intentionally left blank 90

95 M8 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance Nickel plated brass body M8 Connection Cable 2m (PUR), 3ø 3 x 0.15 M8 connector M12 connector Shielded Non shielded Switching distance Sn mm 1.5 mm 3 mm 1.5 mm 3 mm 1.5 mm 3 mm Nickel plated brass POM With LED Without LED <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms Repeat accmracy <5% (Sr) Time delay before <25 ms availability RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 40 gr. ± 15 gr. ± 22 gr. NPN N.O. CCM1 0801N A3U2 CCM2 0803N A3U2 CCM1 0801N ACU3 CCM2 0803N ACU3 CCM1 0801N ARU4 CCM2 0803N ARU4 NPN N.C. CCM1 0801N B3U2 CCM2 0803N B3U2 CCM1 0801N BCU3 CCM2 0803N BCU3 CCM1 0801N BRU4 CCM2 0803N BRU4 PNP N.O. CCM1 0801P A3U2 CCM2 0803P A3U2 CCM1 0801P ACU3 CCM2 0803P ACU3 CCM1 0801P ARU4 CCM2 0803P ARU4 PNP N.C. CCM1 0801P B3U2 CCM2 0803P B3U2 CCM1 0801P BCU3 CCM2 0803P BCU3 CCM1 0801P BRU4 CCM2 0803P BRU4 91

96 M12 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance PBT resin body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 1 4 mm adjustable 1 8 mm adjustable 1 4 mm adjustable 1 8 mm adjustable PBT Resin POM PBT POM PBT <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms <5% (Sr) <25 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 66 gr. ± 65 gr. ± 31 gr. ± 30 gr. NPN N.O. CCP1 1204N A3U2 CCP2 1208N A3U2 CCP1 1204N ARU4 CCP2 1208N ARU4 NPN N.C. CCP1 1204N B3U2 CCP2 1208N B3U2 CCP1 1204N BRU4 CCP2 1208N BRU4 PNP N.O. CCP1 1204P A3U2 CCP2 1208P A3U2 CCP1 1204P ARU4 CCP2 1208P ARU4 PNP N.C. CCP1 1204P B3U2 CCP2 1208P B3U2 CCP1 1204P BRU4 CCP2 1208P BRU4 92

97 M12 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance Nickel plated brass body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 1 4 mm adjustable 1 8 mm adjustable 1 4 mm adjustable 1 8 mm adjustable Nickel plated brass PBT <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms <5% (Sr) <25 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 66 gr. ± 65 gr. ± 31 gr. ± 30 gr. NPN N.O. CCM1 1204N A3U2 CCM2 1208N A3U2 CCM1 1204N ARU4 CCM2 1208N ARU4 NPN N.C. CCM1 1204N B3U2 CCM2 1208N B3U2 CCM1 1204N BRU4 CCM2 1208N BRU4 PNP N.O. CCM1 1204P A3U2 CCM2 1208P A3U2 CCM1 1204P ARU4 CCM2 1208P ARU4 PNP N.C. CCM1 1204P B3U2 CCM2 1208P B3U2 CCM1 1204P BRU4 CCM2 1208P BRU4 93

98 M12 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance body M12 Connection Cable 2m (PUR), 4ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 1 4 mm adjustable 1 8 mm adjustable 1 4 mm adjustable 1 8 mm adjustable PBT <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms <5% (Sr) <25 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 66 gr. ± 65 gr. ± 31 gr. ± 30 gr. NPN N.O. CCU1 1204N A3U2 CCU2 1208N A3U2 CCU1 1204N ARU4 CCU2 1208N ARU4 NPN N.C. CCU1 1204N B3U2 CCU2 1208N B3U2 CCU1 1204N BRU4 CCU2 1208N BRU4 PNP N.O. CCU1 1204P A3U2 CCU2 1208P A3U2 CCU1 1204P ARU4 CCU2 1208P ARU4 PNP N.C. CCU1 1204P B3U2 CCU2 1208P B3U2 CCU1 1204P BRU4 CCU2 1208P BRU4 94

99 M18 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance PBT resin body M18 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 2 8 mm adjustable 2 15 mm adjustable 2 8 mm adjustable 2 15 mm adjustable PBT Resin PBT 300 ma <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms <5% (Sr) 350 ma <25 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 92 gr. ± 94 gr. ± 79 gr. ± 80 gr. NPN N.O. CCP1 1808N A3U2 CCP2 1815N A3U2 CCP1 1808N ARU4 CCP2 1815N ARU4 NPN N.C. CCP1 1808N B3U2 CCP2 1815N B3U2 CCP1 1808N BRU4 CCP2 1815N BRU4 PNP N.O. CCP1 1808P A3U2 CCP2 1815P A3U2 CCP1 1808P ARU4 CCP2 1815P ARU4 PNP N.C. CCP1 1808P B3U2 CCP2 1815P B3U2 CCP1 1808P BRU4 CCP2 1815P BRU4 95

100 M18 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance Nickel plated brass body M18 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 2 8 mm adjustable 2 15 mm adjustable 2 8 mm adjustable 2 15 mm adjustable Nickel plated brass PBT 300 ma <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms <5% (Sr) 350 ma <25 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 115 gr. ± 110 gr. ± 69 gr. ± 69 gr. NPN N.O. CCM1 1808N A3U2 CCM2 1815N A3U2 CCM1 1808N ARU4 CCM2 1815N ARU4 NPN N.C. CCM1 1808N B3U2 CCM2 1815N B3U2 CCM1 1808N BRU4 CCM2 1815N BRU4 PNP N.O. CCM1 1808P A3U2 CCM2 1815P A3U2 CCM1 1808P ARU4 CCM2 1815P ARU4 PNP N.C. CCM1 1808P B3U2 CCM2 1815P B3U2 CCM1 1808P BRU4 CCM2 1815P BRU4 96

101 M18 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance body M18 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 2 8 mm adjustable 2 15 mm adjustable 2 8 mm adjustable 2 15 mm adjustable PBT 300 ma <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms <5% (Sr) 350 ma <25 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 115 gr. ± 110 gr. ± 69 gr. ± 69 gr. NPN N.O. CCU1 1808N A3U2 CCU2 1815N A3U2 CCU1 1808N ARU4 CCU2 1815N ARU4 NPN N.C. CCU1 1808N B3U2 CCU2 1815N B3U2 CCU1 1808N BRU4 CCU2 1815N BRU4 PNP N.O. CCU1 1808P A3U2 CCU2 1815P A3U2 CCU1 1808P ARU4 CCU2 1815P ARU4 PNP N.C. CCU1 1808P B3U2 CCU2 1815P B3U2 CCU1 1808P BRU4 CCU2 1815P BRU4 97

102 M30 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance PBT resin body M30 Connection Cable 2m (PUR), 5ø 3 x 0.15 M12 connector Shielded Non shielded Switching distance Sn mm 2 20 mm adjustable 2 30 mm adjustable 2 20 mm adjustable 2 30 mm adjustable PBT Resin PBT 300 ma <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms <5% (Sr) 350 ma <25 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 195 gr. ± 197 gr. ± 103 gr. ± 120 gr. NPN N.O. CCP1 3020N A3U2 CCP2 3030N A3U2 CCP1 3020N ARU4 CCP2 3030N ARU4 NPN N.C. CCP1 3020N B3U2 CCP2 3030N B3U2 CCP1 3020N BRU4 CCP2 3030N BRU4 PNP N.O. CCP1 3020P A3U2 CCP2 3030P A3U2 CCP1 3020P ARU4 CCP2 3030P ARU4 PNP N.C. CCP1 3020P B3U2 CCP2 3030P B3U2 CCP1 3020P BRU4 CCP2 3030P BRU4 98

103 M30 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance Nickel plated brass body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 2 20 mm adjustable 2 30 mm adjustable 2 20 mm adjustable 2 30 mm adjustable Nickel plated brass PBT 300 ma <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms <5% (Sr) 350 ma <25 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 231 gr. ± 219 gr. ± 147 gr. ± 137 gr. NPN N.O. CCM1 3020N A3U2 CCM2 3030N A3U2 CCM1 3020N ARU4 CCM2 3030N ARU4 NPN N.C. CCM1 3020N B3U2 CCM2 3030N B3U2 CCM1 3020N BRU4 CCM2 3030N BRU4 PNP N.O. CCM1 3020P A3U2 CCM2 3030P A3U2 CCM1 3020P ARU4 CCM2 3030P ARU4 PNP N.C. CCM1 3020P B3U2 CCM2 3030P B3U2 CCM1 3020P BRU4 CCM2 3030P BRU4 99

104 M30 CAPACITIVE PROXIMITY SWITCHES Standard sensing distance body M30 Connection Cable 2m (PUR), 5.8ø 3 x 0.5 M12 connector Shielded Non shielded Switching distance Sn mm 2 20 mm adjustable 2 30 mm adjustable 2 20 mm adjustable 2 30 mm adjustable PBT 300 ma <2 V Switching frequency 100 Hz Response time 1.5 ms / 1.5 ms <5% (Sr) 350 ma <25 ms RFI>3V/m / EFT>1KV / ESD>4KV(contact) Weight ± 231 gr. ± 219 gr. ± 147 gr. ± 137 gr. NPN N.O. CCU1 3020N A3U2 CCU2 3030N A3U2 CCU1 3020N ARU4 CCU2 3030N ARU4 NPN N.C. CCU1 3020N B3U2 CCU2 3030N B3U2 CCU1 3020N BRU4 CCU2 3030N BRU4 PNP N.O. CCU1 3020P A3U2 CCU2 3030P A3U2 CCU1 3020P ARU4 CCU2 3030P ARU4 PNP N.C. CCU1 3020P B3U2 CCU2 3030P B3U2 CCU1 3020P BRU4 CCU2 3030P BRU4 100

105 Quick-Disconnect Sensor Cables 101

106 This page intentionally left blank 102

107 QUICK-DISCONNECT CABLES M5 Ultra mini Quick disconnect Cables Application Class: Protection: Nominal Voltage: Nominal Power: Insulation Group: Test Voltage: Insulation Resistance: HNE acc. To DIN ( 25 C/+90 C/<75%rF) 60VAC/75VDC 4A C acc. To VDE KV eff./60s. >10 9 Ω Contact: Contact Resistance: Moulded Body: Body: O Ring: Securing Safety Nut: CuZn, pre nickeled and 0.8microns goldplated <5mΩ TPU, self extinguishing TPU, self extinguishing Vitron Nickel plated brass Model Poles Connector Face View M FS4TZV1202 M FA4TZV1202 M FS4TZV1205 M FA4TZV1205 M FS4TZV12075 M FA4TZV12075 M FS4TZV12010 M FA4TZV12010 M8 Pico Quick disconnect Cables 4 Color Code Length Connector Conductors Outer Jacket Gauge Stranding Ø mm Material Straight 2m Right Angle 1 = Brown 2 = White 3 = Blue 4 = Black 5m 7.5m 10m Straight Right Angle Straight Right Angle Straight Right Angle 0.18mm 2 36 x Ø PVC Application Class: Protection: Nominal Voltage: Nominal Power: Insulation Group: Test Voltage: Insulation Resistance: HNE acc. To DIN ( 25 C/+90 C/<75%rF) 60VAC/75VDC 4A C acc. To VDE KV eff./60s. >10 9 Ω Contact: Contact Resistance: Moulded Body: Body: O Ring: Securing Safety Nut: CuZn, pre nickeled and 0.8microns goldplated <5mΩ TPU, self extinguishing TPU, self extinguishing Vitron Nickel plated brass Model Poles Connector Face View C FS3TZV062 C FA3TZV062 C FS3TZV065 C FA3TZV065 C FS3TZV0675 C FA3TZV0675 C FS3TZV0610 C FA3TZV0610 C FS4TZV072 C FA4TZV072 C FS4TZV075 C FA4TZV075 C FS4TZV0775 C FA4TZV0775 C FS4TZV0710 C FS4TZV Color Code Length Connector Conductors Outer Jacket Gauge Stranding Ø mm Material Straight 2m Right Angle 1 = Brown 3 = Blue 4 = Black 1 = Brown 2 = White 3 = Blue 4 = Black 5m 7.5m 10m 2m 5m 7.5m 10m Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle 0.34mm 2 42 x Ø PVC 0.25mm 2 32 x Ø PVC 103

108 M8 Pico Quick disconnect Extension Cables Model Poles Face View Male / Female Color Code Length Connector Conductors Outer Jacket Gauge Stranding Ø mm Material C XSS4TZV071 1m Straight/ Straight C XSS4TZV = Brown 2 = White 3 = Blue 4 = Black 2m Straight/ Straight 0.25mm 2 32 x Ø PVC M12 Micro Quick disconnect Cables Application Class: Protection: Nominal Voltage: Nominal Power: Insulation Group: Test Voltage: Model Poles Connector Face View R FS4TZV072 R FA4TZV072 R FS4TZV075 R FA4TZV075 R FS4TZV0775 R FA4TZV0775 R FS4TZV0710 R FA4TZV0710 R FS4TZY872 R FA4TZY872 R FS4TZY875 R FA4TZY875 R FS4TZY8775 R FA4TZY8775 R FS4TZY8710 R FA4TZY8710 R FS5TZU822 R FA5TZU822 R FS5TZU825 R FA5TZU825 R FS5TZU8275 R FS5TZU8275 R FS5TZU8210 R FS5TZU HNE acc. To DIN ( 25 C/+90 C/<100%rF) IP68 4 poles: 250VAC/300VDC 5 poles: 30VAC/36VDC 4A C acc. To VDE poles: 2.0KV eff./60s. 5 poles: 1.5KV eff./60s. Insulation Resistance: Contact: Contact Resistance: Moulded Body: Body: O Ring: Securing Safety Nut: >10 9 Ω CuSn, brass, pre nickeled and 0.3microns gold plated <5mΩ TPU, self extinguishing TPU, self extinguishing Vitron Nickel plated brass Color Code Length Connector Conductors Outer Jacket Gauge Stranding Ø mm Material Straight 2m Right Angle 1 = Brown 2 = White 3 = Blue 4 = Black 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray 5m 7.5m 10m 2m 5m 7.5m 10m 2m 5m 7.5m 10m Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle 0.25mm 2 32 x Ø PVC 0.34mm 2 42 x Ø PUR/PVC 0.50mm 2 16 x Ø PUR 104

109 M12 Micro Quick disconnect Extension Cables Model Poles Face View Female / Male Color Code Length Connector Conductors Outer Jacket Gauge Stranding Ø mm Material R XSS4TZV071 1m Straight/ Straight R XSS4TZV = Brown 2 = White 3 = Blue 4 = Black 2m Straight/ Straight 0.25mm 2 32 x Ø PVC R XSA4TZV071 1m Right Angle/ Straight R XSA4TZV = Brown 2 = White 3 = Blue 4 = Black 2m Right Angle/ Straight 0.25mm 2 32 x Ø PVC 105

110 This page intentionally left blank 106

111 General Information Inductive Proximity Sensors Characteristics and use of inductive proximity sensors Analog Inductive Proximity Sensors Characteristics and use of analog inductive proximity sensors Capacitive Proximity Sensors Characteristics and use of capacitive proximity sensors Output Types Explanation of different output types

112 This page intentionally left blank 108

113 INDUCTIVE PROXIMITY SWITCHES GENERAL INFORMATION Principal Inductive Proximity Switches operate by using an L/C resonant oscillator which generates, with the aid of a coil located in the open pot core, a high frequency alternating electromagnetic field. This field emerges from the active face of the switch. When an electrically conductive material (for example a steel plate) moves into the electromagnetic field, an induced eddy current occurs. This eddy current extracts energy from the L/C resonant circuit in the switch, and produces a reduction in the oscillation amplitude. This reduction in the amplitude is converted by the associated electronic circuitry into a clear electronic signal, and changes the state of the switch. When the electrically conductive material is removed from the alternating field the oscillation amplitude increases which, by way of the electronic circuitry, will restore the switch to the original unswitched state. Normal Operating Distance The Normal Operating Distance is defined as the distance between the detector and the target when the change (switching) in the logic state of the proximity switch occurs. This distance and the tests associated in obtaining this distance are outline in CENELEC EN Standards. From this standard the target for establishing Normal Operating Distance is an iron (Fe 37) square with thickness of 1 mm. Table 1 shows the size of this iron square for cylindrical switches. The normal sensing distance Sn and Sr, Su, Sa information is shown Figure A. 109

114 Correction Factor When using inductive proximity switches with non ferrous metals it is necessary to apply a correction factor to the operating distance (sensing range) as follows: Brass Nominal sensing distance x 0.50 Aluminum Nominal sensing distance x 0.45 Copper Nominal sensing distance x 0.40 Chrome Nickel alloy Nominal sensing distance x 0.90 Nominal sensing distance x 0.85 Shielded / Non shielded A shielded construction includes a metal band which surrounds the ferrite core and coil arrangement. This helps to direct the electro magnetic field to the front of the switch. Non shielded switches do not have this metal band, therefore they can be side sensitive. 110

115 Mounting Because of possible interference of the electromagnetic fields generated by the oscillators, minimum spacing is required between adjacent or opposing "active surfaces" of proximity switches. The "active surface " may be flush with the metal in which the switch is mounted (see figure "Shielded Mounting".) The "active surface" must have a free zone in which no metal is present (see figure "Non shielded Mounting".) When mounting proximity switches in this manner where the "active surfaces" are opposite each other, there must be a minimum distance between them (see figure "Opposite Mounting".) It is good engineering practice to mount proximity switches horizontally or with the active surface facing down. Avoid proximity switches that face up wherever possible, especially if metal filings and chips are present. Hysteresis Hysteresis is the travel of the target between the "switch on" point and the "switch off" point. This distance is required to allow the switch to properly detect the target, and reduces the possibility of false trips. See the figure below. 111

116 ANALOG INDUCTIVE PROXIMITY SENSORS GENERAL INFORMATION Principal In common with capacitive and inductive sensors the analog sensor also consists of a transistor oscillator. The oscillator current will be influenced by the approach of metals and electric conductive media to the inductive analog sensors or by metals and all non metals. Analog sensors give a signal output which is proportional to sensing distance. Control output The measured signal will give a voltage output of 0 10V to a load of >4.7 K or a current output of 0 20mA to a load of The control output of the analog sensor is short circuit proof. Voltage Output Current Output Measurement range The measurement range determines over which sensing range a proportional output signal can be given. The measurement range is shown for operation of the analog sensor with a mild steel(st 37) actuator. The sides of this actuator are equal in length to the diameter of the sensor being utilized. Actuation of an analog sensor with metals other than mild steel will result in a reduced measurement range. 112

117 Linearity The linearity error of the output characteristic shows the deviation from an ideal straight line between starting and ending values. The linearity is expressed as a percentage error of the measured range final value. Reproducibility / Resolution The reproducibility is the deviation between consecutive measurements when the same measurement point is utilized repeatedly. The reproducibility is referenced to constant temperature and supply voltage conditions. Temperature error The temperature error gives the deviation of the output signal with a constant sensing distance but with varying ambient temperatures. The temperature error is expressed as a percentage of the final value. Output characteristic graph for non ferrous metals The standard sensing object is iron. Note the use of non ferrous metals may alter the characteristic. 113

118 CAPACITIVE PROXIMITY SWITCHES GENERAL INFORMATION Principal Capacitive proximity switches consist of an RC oscillator with a special multi part sensing electrode. The electrode and the oscillator circuit have a tube connected with earth potential for lateral shielding. This enables flush mounting of the sensor in metal, since the electrical field is only present in front of the sensing electrode. This field is the active zone of the sensor. When the conductive material is removed from the active zone, the oscillator is undamped and the oscillation amplitude decreases. The amplifier of the oscillator voltage and the sensitivity of the sensor can be altered by the built in potentiometer. The middle electrode together with the built in re coupling gives very effective compensation under conditions of humidity, dust or icing. Special circuitry automatically compensates for these influences. The preset sensing distance remains nearly constant. The electrode design, along with the compensating circuitry of capacitive sensors, is a unique design, and provides performance advantages far superior to other capacitive sensors. CA indicates SENSOR ELECTRODE B AND C indicates COMPENSATION ELECTRODES Applications The capacitive switches may be used to limit the level in tanks and containers. The contents may be fluids, pulverized or granulated materials such as PVC powder, dyes, flour, sugar, powdered milk etc. Further applications are as end and limit switches for checking and regulating machinery setting, (even if the materials are non metallic as in conveyor belt positioning and material stacking); checking drive belts and paper reels for sag and tear. Additionally they may be used as detectors for counting metal and non metal components. 114

119 Areas of application for capacitive sensors. Shielded configuration Sensors with a straight line electrical field. These units scan solids (e.g. wafers, components, PCB's, hybrids, cartons, paper piles, bottles, plastic blocks and stacks of paper at a distance, or liquids through a separating wall (glass or plastic up to a max. of 4mm thick). Non shielded configuration Sensors with a spherical electrical field. These units are designed to touch the product, bulk goods or liquids (e.g. granulate, sugar, flour, corn, sand, or oil and water) with their active surface. Sensing distance The sensing distance was determined by using a 1 mm thick square steel plate(st37) as an actuator, with a side length equal to 3xSn. The steel plate was grounded. Ambient temperature was 25 C. The largest possible sensing distance is defined as the nominal sensing distance with a tolerance + 10%sn. The sensing distance depends upon shape, size and nature of the object concerned. If the plate is made from a different material or has a smaller diameter, the sensing distance will be reduced. The sensing distance depends upon shape, size and nature of the object concerned. If the plate is made from a different material or has a smaller diameter, the sensing distance will be reduced. Size correction factor For objects which are not flat and are smaller in relation to the active sensor surface, the following sensing distances are obtained depending on the scaled object surface F/F0, where: F = sensor front surface (active surface), and F0 = front surface of the object being scanned. The figures in the table below refer to flush sensors, and objects in the form of long thin rods. The three right hand columns of the table reflect the application example for a CCM1 1808x A3 sensor. 115

120 The diagram below shows in graphic form the data from the table. Material correction factor If the material of the object in question is not metal or water, the sensing distance is reduced. The reduction factors for the different materials are shown in the table below. 116

121 Sensitivity adjustment Capacitive proximity sensors have a fourteen turn potentiometer. The potentiometer must be adjusted to suit most applications. Turn clockwise to increase sensitivity. From the original setting of xSn (Sn=nominal range), the nominal sensing range is reached after 2 3 clockwise turns. This, however, leads to nonlinearity of the curve and oversensitivity, which may lock on the sensor. If this occurs, decrease sensitivity by turning the potentiometer 2 3 turns counterclockwise. Temperature Capacitive proximity switches will function within a temperature range of. The switching distance deviation is 20% provided that the switching distance is not greater than the nominal switching distance (taking into consideration the reduction factors of the material). 117

122 Sensors for shielded mounting Example: A liquid e.g. water, is to be scanned through a partition wall by a flush sensor type CCP1 3425P A3. The partition wall made of glass or plastic with a max. thickness of 4 mm. To calculate the wall thickness, the thickness in mm will be % of the switching gap of the sensor but a max. of 4 mm. The face (active surface) of the sensor is bonded to the glass or plastic wall. The vessel is filled with water until approx. 75% of the active surface of the sensor is covered. Turn the potentiometer of the sensor counterclockwise (reduce sensitivity) until the LED and the output signal turn off. Turn the potentiometer clockwise (increase sensitivity) until the LED and the output signal switch on. Using the calibration process described ensures that the sensor does not detect the wall or the water residue on the wall. It only switches when the liquid has reached the 75% level described above. Sensors for non shielded mounting Due to their spherical fields, capacitive sensors are suitable for applications such as filling level indicators and plastic granulate or powder. Example: A granulate in a vessel is to be scanned by a non shielded mounted sensor type CCM2 3030P A3. The sensor is mounted so its active surface (free zone at head) projects into the product in the vessel, as shown below, the sensor must be completely covered by the product before calibration. Turn the potentiometer of the sensor counterclockwise (reduce sensitivity) until the LED and the output signal turn off. Turn the potentiometer clockwise (increase sensitivity) until the LED and the output signal switch on. Make an additional 1/4 turn (90 turn) in the clockwise direction. This is to compensate for temperature fluctuations or changes in the humidity of the product scanned. 118

123 Installation requirements Surrounding objects will affect capacitive proximity switches by affecting switch capacitance or sensing the object. It is necessary to maintain a standard distance between a capacitive proximity switches and the surrounding objects when installing the capacitive proximity switch. Ground connection The operating distance is affected when either or both the sensing object (60x60x1t iron) and capacitive switch are connected to ground. CCM 3020N A CCP 1815N A 119

124 Influence of drops of water on sensing face The following figures show the change in operating distance caused by drops of water on the sensing face of capacitive proximity switches. If the water drops are 0.2 ml (about 2 3 drops), the operating distance will be increased about 20%, as the attached water drops on the sensing face cover the surface and is flowing operating distance is increased over 300%. Caution Ice, frost, moisture, oil or dust on the active surface will cause faulty operation. The detection of liquids or powder in non metallic tanks, if the liquids or powders are attached to tank wall, it will cause faulty operation. The application of a DC capacitive proximity switch, connected to a heavy load current (current over, (electric motor, electrical magnetic contact) the output transistor will break down. It should be connected through a relay. 120

125 PROXIMITY SENSORS OUTPUT TYPES NPN Output Type () NPN output proximity switches consist of the following circuit. In N.O. operation, with no sensing, the transistor is in the OFF mode. When sensing, the load current passes through the transistor. In N.C. operation, the function is opposite. In N.O. operation, as the load current passes, the load short circuit protection is activated. Note: <1V, it is tested in the max. load current, 200mA. PNP Output Type () PNP output type proximity switches are designed with the following output circuit. In N.O. operation without sensing status, the transistor is in the OFF mode, with sensing status the transistor is in the ON mode, as the load current passes through the transistor; in the N.C. mode, the operation is opposite in the N.O. operation. As the load current passes 200mA, the load short circuit protection circuit is activated. Note: <1V is tested at the max. load current, 200mA. 121

126 2 Wire Output Type These devices operate exactly like mechanical switches, with the connected load being switched in series. They can be used into PLC inputs like relays. Notice should be taken on the influence of minimum load current, leakage current and voltage drop. In the "off" condition, only the leakage current(the no load current) flows through the external load. In the "on" condition the amplifiers' output transistor conducts. Between the connections of the proximity switch there is now a voltage drop created by the internal Z diode (<6v) and this should be allowed for within the supply voltage. The voltage applied to the external load is lower than the supply voltage by an amount equal to the voltage drop. The output amplifier is short circuit proof and overload protected. SHORT CIRCUIT PROTECTION Pulsing short circuit protection In case of overload or short circuit, the output transistor is rapidly switched on and off. This tests whether the short has been removed or not. This kind of proximity switch's voltage drop is <1V. 122

127 Analog Current Output The measured signal will give a voltage output of 0 20mA to a load of The control output of the analog sensor is short circuit proof. Analog Voltage Output The measured signal will give a voltage output of 0 10V to a load of >4.7 K. The control output of the analog sensor is short circuit proof. 123

128 This page intentionally left blank 126

129 TERMINAL CONNECTIONS Cable Type Sensors 2 Wire Sensors NPN/PNP N.O. NPN/PNP N.C. 3 Wire Sensors NPN N.O. PNP N.O. NPN N.C. PNP N.C. Analog Sensors Analog Current Output Analog Voltage Output 125

130 Connector Type Sensors M5 connector 3 Wire NPN N.O. 3 Wire PNP N.O. 3 Wire NPN N.C. 3 Wire PNP N.C. M8 connector 2 Wire NPN/PNP N.O. 2 Wire NPN/PNP N.C. 3 Wire NPN N.O. / N.C. 3 Wire PNP N.O. / N.C. Analog Current Output Analog Voltage Output M12 connector 2 Wire NPN/PNP N.O. 2 Wire NPN/PNP N.C. 126

131 Connector Type Sensors M12 connector 3 Wire NPN N.O. 3 Wire PNP N.O. 3 Wire NPN N.C. 3 Wire PNP N.C. Analog Current Output Analog Voltage Output 127

132 This page intentionally left blank 128

133 Notes

134 Lorentzstraat 4B, 6716 AD Ede, The Netherlands P.O. Box 168, 6710 BD Ede, The Netherlands Phone +31 (0) Fax +31 (0) E mail [email protected] Web Disclaimer: Published configurations, performance specifications and prices are subject to change without notice. While due caution has been exercised in the production of this document, possible errors and omissions Are unintentional. Publication date: November