The Ring Fixator System

Transcription

1 Half Rings Internal Dia. D D D D D D D D D D D D Composite Half Rings with Carbon Reinforcement Internal Dia. D D D D D D D D D D D D Rings with Curved Extremities Internal Dia. D D D D /8 Rings Internal Dia. D # D # D # D D # D D D # D # Composite 5/8 Rings Internal Dia. D # D # D D D # D #

2 Italian Femoral Arches Composite Foot Rings with Carbon reinforcement Short Arm Internal Dia. D D D D D D Small D Small D Large D Large Composite Half Pin Arc D D D Arch 60mm 0 90 Arch 180mm 0 90 Arch 200mm Composite Foot Rings with Carbon reinforcement Long Arm Internal Dia. D D D D D Arches with Internal Radius D D D

3 Threaded Rods D D D D D D D D D D D Telescopic Rods D D D D D # D # D # Graduated Telescopic Rods Threaded Rods - Slotted D D D D D D D D D Threaded Rods - Partial D D D Hinges- Female D D Standard Low Profile

4 Hinges - Male D D Standard Low Profile Universal Joint D Hinges - 90 D D Standard Low Profile Rotational and Translational Device D Post - Female D D D Post - Male D D D Short Connection Plates D D D D D D D D D

5 Long Connection Plates D D D Bushing D Threaded Sockets Connected Plates with Threaded Ends D D D D D D D D Connection Bolts Twisted Plates D D Dia D D D D Curved Plates D Nut D D D D Nut Thin Nut Nylon Insert Nut Square Nut

6 Flat Sided Washers Thickness D D Star Washers D Slotted washers Thickness D Wire Fixation Bolts D D D Cannulated Cannulated with Threaded Head Slotted Spacing Washers Thickness D D Wire Fixation Buckle D Split Locking Washers Thickness D Single Pin Fixation Bolt D Conical Washer Couple D mm Nut D

7 Oblique Support Connection D Multiple Pin Fixation Clamp D Sleeves D D D D mm 4mm 5mm 6mm Wires : Bayonet Point - Cortical Blocks For Half Pins D D D D D Blocks For Half Pins to be used with Sleeves D D D D D Dia D D Wires : Trocar Point - Cancellous Dia D D With Stopper ( Bayonet Point ) Part. No. Dia D D

8 Instrument Set for Set Screws Drill Guide & Trocar D D D Drill Guide 4.8 mm Screw Guide 6 mm Trocar 6 mm Straight Screw Driver for Set Screws D mm Across Flat Set Screw D o 90 Screw Driver for Set Screws D mm Across Flat Basic Instrument Set Box Wrench for Nut D Combination Wrench D D D Size 10mm 13mm 19mm Box Wrench for Bolt D Wire Tensioner - Mechanical D

9 Basic Instrument Set Wire Tensioner - Direct Measuring D Containers for Ring Fixation System Corticotome D D D D Size 3mm 5mm 7mm 9mm H Rings 80 to 130 mm H Rings 140 to 180 mm H Rings 200 to 240 mm H Special Rings & Arches H Bolts, Nuts & Washers H Plates H Wires & Instruments H Rods, Posts, Support & Hinges H Telescopic Rod H Adult Tibial Basic Set H Adult femoral Basic set H Blocks for half pin components set H Basic Instruments set Half Pin Introducer C

10 Containers for Rings, 80mm -130mm - H Tray Accepts the following Qty. D Composite Half Rings with Carbon Reinforcement Dia. 80 mm 8 each D Composite Half Rings with Carbon Reinforcement Dia. 100 mm 8 each D Composite Half Rings with Carbon Reinforcement Dia. 110 mm 8 each D Composite Half Rings with Carbon Reinforcement Dia. 120 mm 8 each D Composite Half Rings with Carbon Reinforcement Dia. 130 mm 8 each OR D Half Rings Dia. 80 mm 10 each D Half Rings Dia. 100 mm 10 each D Half Rings Dia. 110 mm 10 each D Half Rings Dia. 120 mm 10 each D Half Rings Dia. 130 mm 10 each Containers for Rings, 140mm -180mm - H Tray Accepts the following Qty. D Composite Half Rings with Carbon Reinforcement Dia. 140 mm 8 each D Composite Half Rings with Carbon Reinforcement Dia. 150 mm 8 each D Composite Half Rings with Carbon Reinforcement Dia. 160 mm 8 each D Composite Half Rings with Carbon Reinforcement Dia. 180 mm 8 each OR D Half Rings Dia. 140 mm 10 each D Half Rings Dia. 150 mm 10 each D Half Rings Dia. 160 mm 10 each D Half Rings Dia. 180 mm 10 each Containers for Rings, 200mm -240mm - H Tray Accepts the following Qty. D Half Rings Dia. 200 mm 8 each D Half Rings Dia. 220 mm 8 each D Half Rings Dia. 240 mm 8 each OR D Composite Half Rings with Carbon Reinforcement Dia. 200 mm 8 each D Composite Half Rings with Carbon Reinforcement Dia. 220 mm 8 each D Composite Half Rings with Carbon Reinforcement Dia. 240 mm 8 each Containers for Special Rings & Arches - H Tray Accepts the following Qty. D /8 Rings 130 mm 3 each D /8 Rings 150 mm 3 each D /8 Rings 160 mm 3 each D /8 Rings 180 mm 3 each OR D Composite 5/8 Rings 130mm 3 each D Composite 5/8 Rings 150mm 3 each