MXS Series. High-Efficiency Multi-Zone Ductless System Up to 19.9 SEER Up to 12.7 EER Up to 12.5 HSPF. Product Features

Transcription

1 MXS Series High-Efficiency Multi-Zone Ductless System Up to. SEER Up to 2. EER Up to 2.5 HSPF Product Features Inverter Compressor 208/230/ Power Supply Cooling Operating Range: 0-5 F (w/ Wind Baffle) Heating Operating Range: F (w/ Drain Pan Heater) Precharged for up to 3 ft of Liquid Line Outdoor Sound Pressures as Low as 50 db(a) Outdoor Unit Quiet Operation Auto Changeover Auto Fan Speed Control Self Diagnostics with Digital Display Auto Restart after Power Failure Anti-Corrosion Treatment on Heat Exchanger * Complete warranty details available from your local dealer or at To receive the 2-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration and some of the additional requirements are not required in California or Quebec. SS-MXS /5 Supersedes /5

2 Product Specifications Outdoor Units Model Name 2MXS8NMVJU 3MXS2NMVJU MXS36NMVJU RMXS8LVJU Cooling Capacity (Rated - Max) BTU/h 8,000-2,000 2,000-30,000 36,000-38,000 8,000 Heating Capacity (Rated - Max) BTU/h 8,00-25,000 2,000-36,000 36,000-3,000 5,000 Max Connected Capacity BTU/h 2,000 3,000 8,000 62,00 Min-Max No. of Indoor Units Connections Sound Pressure (Cooling/Heating) db(a) 50/5 52/5 52/5 5/58 Operating Range - Cooling F DB Operating Range - Heating Operating Range - Heating with Drain Pan Heater F DB Piping Dimensions Max. Length (for all rooms) ft Max. Length (for one room) ft Max. Piping Height ft Electrical Data Power Supply V/Ph/Hz // // // //60 Minimum Circuit Amps A Max. Overcurrent Protection A Dimensions (H x W x D) in. 2 x 3¼ x 2⅝ ` 2 x 3¼ x 2⅝ 2 x 3¼ x 2⅝ 52¹⁵ ₁₆ x 35⁷ ₁₆ x 2⅝ Net Weight lbs Non-Ducted 8./ 2.5./ 2../.2 8.8/ 0.3 SEER/ EER Mixed 6.5/.0 5./.2 5./ /.8 Ducted.0/.5.0/..0/../.3 Non-Ducted 0. /. 2.5/.6 2.2/.5.3/ 3.0 HSPF/ COP Mixed.5/. 0./ / / 2. Ducted 8.2/. 8.2/ / 3../ 2. Indoor Wall-Mounted Units Model Name CTXS0LVJU FTXS0LVJU FTXS2LVJU FTXS5LVJU FTXS8LVJU FTXS2LVJU 2MXS8NMVJU 2MXS8NMVJU 2MXS8NMVJU 2MXS8NMVJU 3MXS2NMVJU Outdoor Unit Compatibility 3MXS2NMVJU 3MXS2NMVJU 3MXS2NMVJU 3MXS2NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU 332/26/ 38/2/ 03/30/ 568// 583/8/ 63// Airflow-Wet (H/M/L/SL) CFM /5 /5 205/55 385/ / / /20/ 20/32/ 38/335/ 53/505/ 625/526/ 6/52/ Airflow-Dry (H/M/L/SL) CFM 233/2 233/2 20/22 /3 3/3 5/03 Sound Pressure - Cooling (H/M/L/SL) db(a) 38/32/25/22 /33/25/22 5/3/2/23 5/0/35/32 6//36/33 5//3/3 Sound Pressure - Heating (H/M/L/SL) db(a) 38/33/28/25 2/35/28/25 5/3/2/26 3/38/33/30 5/0/35/32 8/2/3/3 Piping Connections Liquid (O.D.) in. Ø / Ø / Ø / Ø / Ø / Ø / Gas (O.D.) in. Ø 3/8 Ø 3/8 Ø 3/8 Ø /2 Ø /2 Ø 5/8 Condensate Drain in. Ø 5/8 Ø 5/8 Ø 5/8 Ø 5/8 Ø 5/8 Ø 5/8 Dimensions (H x W x D) in. ⅝ x 3½ x 8⁷ ₁₆ 3⅜ x ⅝ x ¾ Net Weight lbs SS-MXS

3 Product Specifications Indoor Slim-Duct Units Model Name FDXS0LVJU FDXS2LVJU CDXS5LVJU CDXS8LVJU CDXS2LVJU 2MXS8NMVJU 2MXS8NMVJU 2MXS8NMVJU 3MXS2NMVJU Outdoor Unit Compatibility 3MXS2NMVJU 3MXS2NMVJU 3MXS2NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU External Static Pressure "W.G Airflow-Wet (H/M/L/SL) CFM 305/280/260/ /280/260/235 2/388/353/2 2/388/353/2 2/388/353/2 Airflow-Dry (H/M/L/SL) CFM 305/280/260/ /280/260/235 2/388/353/2 2/388/353/2 2/388/353/2 Sound Pressure - Cooling (H/M/L/SL) db(a) 35/33/3/- 35/33/3/- 3/35/33/3 3/35/33/3 3/35/33/3 Sound Pressure - Heating (H/M/L/SL) db(a) 35/33/3/- 35/33/3/- 3/35/33/3 3/35/33/3 3/35/33/3 Liquid (O.D.) in. Ø / Ø / Ø / Ø / Ø / Piping Connections Gas (O.D.) in. Ø 3/8 Ø 3/8 Ø /2 Ø /2 Ø /2 Condensate Drain in. Ø 25/32 Ø 25/32 Ø 25/32 Ø 25/32 Ø 25/32 Dimensions (H x W x D) in. ⅞ x 2⁹ ₁₆ x 2⁷ ₁₆ ⅞ x 35⁷ ₁₆ x 2⁷ ₁₆ Indoor 2 x2 Ceiling Cassette Units Model Name FFQ0LVJU FFQ2LVJU FFQ5LVJU FFQ8LVJU 2MXS8NMVJU 2MXS8NMVJU 2MXS8NMVJU 3MXS2NMVJU Outdoor Unit Compatibility 3MXS2NMVJU 3MXS2NMVJU 3MXS2NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU Cooling Capacity (Nominal) BTU/h,500 2,000 5,000 8,000 Heating Capacity (Nominal) BTU/h,00,000,500 2,000 Power Supply V/Ph/Hz // // // //60 Airflow Rate (H/L) CFM 38/ /230 2/ /353 Sound Pressure - Cooling (H/L) db(a) 36/2 38/2 2/3 6/3 Sound Pressure - Heating (H/L) db(a) 36/2 38/2 2/3 6/3 Liquid (O.D.) in. Ø / Ø / Ø / Ø / Piping Connections Gas (O.D.) in. Ø 3/8 Ø 3/8 Ø /2 Ø /2 Condensate Drain (O.D.) in. Ø -/32 Ø -/32 Ø -/32 Ø -/32 Dimensions Unit (H x W x D) in. ¼ x 22⅝ x 22⅝ ¼ x 22⅝ x 22⅝ Dimensions Deco Panel (H x W x D) in. 2¼ x 2⅝ x 2⅝ 2¼ x 2⅝ x 2⅝ Net Weight lbs Indoor Floor-Standing Units Model Name FVXS0NVJU FVXS2NVJU FVXS8NVJU 2MXS8NMVJU 2MXS8NMVJU 3MXS2NMVJU Outdoor Unit Compatibility 3MXS2NMVJU 3MXS2NMVJU MXS36NMVJU MXS36NMVJU MXS36NMVJU RMXS8LVJU RMXS8LVJU RMXS8LVJU Airflow Rate Cooling CFM Airflow Rate Heating CFM Power Supply V/Ph/Hz // // //60 Sound Pressure - Cooling db(a) 38/32/26/23 3/33/2/2 /0/36/32 Sound Pressure - Heating db(a) 38/32/26/23 3/33/2/2 /0/36/32 Piping Liquid (O.D.) in. Ø / Ø / Ø / Connections Gas (O.D.) in. Ø 3/8 Ø 3/8 Ø /2 Dimensions Unit (H x W x D) in. 23⅝ x 2½ x 8¼ Net Weight lbs SS-MXS 3

4 Product Specifications Piping Requirements Maximum allowable length Allowable height Minimum allowable length Allowable length after the REFNET branch Additional refrigerant calculation Between outdoor and BP units Between BP and indoor units Between BP and indoor unit Total piping length Total piping length room length Allowable Length Details Piping length between outdoor and BP units 80 ft (55 m) - [Example] a+b+c+d+e 80 ft Piping length between BP and indoor units: 262 ft (80 m) - [Example] f+g+h+i+j+k+l 262ft Piping length between BP and indoor unit ft (5 m) - [Example] f, g, h, i, j, k, l ft Between outdoor and indoor units Difference in height between outdoor & indoor units (H) 8 ft (30 m) Between outdoor and BP units Difference in height between outdoor and BP units (H2) 8 ft (30 m) Difference in height Between BP and BP units Difference in height between BP and BP units (H3) ft (5 m) Between indoor and indoor units Difference in height between indoor and indoor units (H) ft (5 m) Piping length Pipe length between outdoor unit and first refrigerant branch kit (refnet joint) 6. ft [Example] a 6. ft Piping length from first refrigerant branch kit (REFNET joint) to indoor unit 3 ft (0 m) [Example] unit 6: b+c+k 3 ft [Example] unit 5: b+e+j 3 ft [Example] unit 3: d+h 3 ft Total length (ft / m) of liquid piping size at Ø 3/8 inch (Ø.5mm) x + Total length (ft / m) of liquid piping size at Ø / inch (Ø 6.mm) BP Units Model Name BPMKS08A2U Power Supply V/Ph/Hz //60 Power Consumption W 0 Running Current A 0.05 Sound Pressure - (Cooling/Heating) db(a) 32/32 Number of Connectable Indoor Units to 2 Minimum Connection Combination,000 Maximum Connection Combination 8,000 Piping Connections (O.D.) Liquid Outdoor Unit Side in. Ø / x 2 Indoor Unit Side in. Ø / x 2 Gas Outdoor Unit Side in. Ø 5/8 x 2 Indoor Unit Side in. Ø 5/8 x 2 Dimensions (H x W x D) in. ⅟₁₆ x ⁹ ₁₆ x 3¾ Net Weight lbs. 8 Nominal Conditions: Cooling Mode: Heating Mode: Note: Indoor: 80 F DB / 6 F WB Indoor: 0 F DB Specifications are subject Outdoor: 5 F DB Outdoor: F DB / 3 F WB to change without notice Level Difference: 0 ft. Level Difference: 0 ft. SS-MXS

5 Dimensions Slim-Duct Indoor Units FDXS0/2LVJU /2 (2.5mm) 2-/6(620mm) 8 3/6 (2mm) 2-/ (5.5mm) 2-/6(00mm) 2(300mm) OR MORE (SERVICE SPACE) -/6 (500mm) (SUSPENSION BOLT PITCH) 2-3/8 (60mm) -/2(20mm) OR MORE 3/6 (20mm) OR MORE 3/6 (20mm) OR MORE 5-3/ (00mm) OR MORE CEILING 2-/6 (620mm) 2-/6 (00mm) -3/6 (300mm) ROOM TEMP. 2-3/ SENSOR (0mm) TIMER LAMP INDOOR UNIT ON/OFF SWITCH (-3/) (5mm) SIGNAL RECEIVER CORD (LENGTH: -3/6) 6-φ 3/6 (φ.mm) 5x(P3-5/6)=-/6 << SERVICE SPACE >> ( : 00mm) HOLE (P00mm) (500mm) ARROW VIEW INFRA RECEIVER UNIT 2-/8 (0mm) INSPECTION DOOR SUSPENSION BOLT (SUSPENSION BOLT PITCH) (CEILING OPENING) 6-M5 HOLES -M8~M0 26-3/ (680mm) 5-/8 (30mm) 3-/6 (0mm) 23-5/8 (600mm) 26 (660mm) 2-/2 (63mm) 3-5/6 (00mm) 22-3/6 (580mm) x(p5-/8)=23-5/8 2 0 (P50mm) (600mm) -/8 (mm) 3-/6 (0mm) SIGNAL TRANSMITTER /6 (8mm) 2-5/6 (58mm) (3/6) -/2 (38mm) (20mm) -3/ (20mm) (2-3/6) (2mm) -3/8 (8mm) (ARC52A23) -5/6 (50mm) 3/6 (20mm) 3/8 (0mm) -/8 (200mm) 6-/6 (0mm) 6 (53mm) 3-/8 (80mm) -/8 (200mm) -/6 (80mm) 6-5/6 (60mm) 3-5/6 (00mm) 3/8 (0mm) 3/6 (20mm) -5/6 (50mm) 6-M5 HOLES -M HOLES 2-/6 (620mm) 23-5/8 (600mm) -3/6 (30mm) NOTE) 6 3-/8 (80mm) 0 3-/6 (0mm) 5x(P3-5/6)=-/6 5-/2 (0mm) (P00mm) (500mm) 22-3/6 (580mm) 3-5/6 (00mm) << IN CASE OF BOTTOM-SUCTION >> 3-5/6 (00mm) /8 (23mm) 3 (330mm) /6 (0mm). IN CASE OF BACK-SUCTION, MOUNT CHAMBER COVER TO BOTTOM SIDE OF THE UNIT. IN CASE OF BOTTOM-SUCTION, MOUNT CHAMBER COVER TO BACK SIDE OF THE UNIT. 2. LOCATION OF UNIT'S NAME PLATE: CONTROL BOX COVER 3. MOUNT THE AIR FILTER AT THE SUCTION SIDE. SELECT ITS COLORIMETHOD (GRAVITY METHOD) ( 50% OR MORE. IT CAN NOT BE EQUIPPED WITH AIR FILTER (ACCESSORY) WHEN CONNECTING DUCT TO SUCTION SIDE.. PIPE SPECIFICATION ) 5-/2 (0mm) 5x(P3-5/6)=-/6 (P00mm) (500mm) 3-/8 (80mm) 2-/6 (620mm) << IN CASE OF BACK-SUCTION >> 3-5/6 (00mm) 6-5/6 (60mm) -/6 (80mm) 0 PROTECTION NET AIR FILTER (ACCESSORY) 8 SUSPENSION BRACKET POWER SUPPLY CONNECTION 6 INFRA RECEIVER UNIT CONNECTION 5 CONTROL BOX DRAIN HOSE (ACCESSORY) I.D. φ3/32(φ25mm) (OUTLET) 3 SOCKET FOR DRAIN VP20 (O.D. φ-/32 (φ26mm)/ I.D. φ25/32 (φ20mm)) 2 GAS PIPE CONNECTION φ3/8 (φ.5mm) (FLARE CONNECTION) LIQUID PIPE CONNECTION φ/ (φ6.mm) (FLARE CONNECTION) NUMBER NAME DESCRIPTION 3D06 CDXS5/8LVJU 2-/6 (620mm) 35-/6 (00mm) -3/6 (300mm) OR MORE 2-/6 (620mm) (SERVICE SPACE) -/6 (500mm) (SUSPENSION BOLT PITCH) 3/6 (20mm) OR MORE 3/6 (20mm) OR MORE 5-3/ (00mm) OR MORE (IN CASE OF BOTTOM SUCTION) CEILING 35-/6 (00mm) (-3/) (5mm) ROOM TEMP. 2-3/ (3/6) -/2 (38mm) SENSOR (0mm) (20mm) TIMER LAMP < SERVICE SPACE > INDOOR UNIT 8 22-φ 3/6 (φ.mm) HOLES ON/OFF SWITCH 8xP.3-5/6 (00mm)=3-/2 (800mm) SIGNAL RECEIVER 3 (0mm) CORD (LENGTH: -3/6) ( :00mm) (SUSPENSION BOLT PITCH) 3-5/8 (880mm) INFRA RECEIVER UNIT 33-/8 (860mm) 5-/8 (30mm) 2-/2 (63mm) ARROW VIEW 3-/6 (0mm) xp.5-/8 (50mm)=23-5/8 (600mm) 3-/6 (0mm) INSPECTION DOOR (CEILING OPENING) SUSPENSION BOLT 2 -UNC5/6 ~ 3/8 (M8 ~ M0) 20-M5 HOLES /2 (2.5mm) 3/6 (2mm) 2-/ (5.5mm) 2-3/8 (60mm) -/8 (mm) 3-/6 (0mm) -/2 (20mm) OR MORE -3/6 (300mm) -3/ (20mm) SIGNAL TRANSMITTER /6 (8mm) 2-5/6 (58mm) (2-3/6) (2mm) -3/8 (8mm) (ARC52A23) 0-5/6 (50mm) 3/6 (20mm) 3/8 (0mm) -/8 (200mm) 6-/6 (0 mm) -/8 (200mm) -/6 (80mm) 6 (53mm) 6-5/6 (60mm) 3-/8 (80mm) 3-5/6 (00mm) 3/8 (0mm) 3/6 (20mm) -5/6 (50mm) 3-5/6 (00mm) /8 (23mm) 8-M HOLES -3/6 (30mm) 3 (330mm) 5-/8 (50 mm) xp.3-5/6 (00)=2-/6 (00mm) /6 (00 mm) 30-/6 (80mm) 3-/6 (0mm) 3-/2 (800mm) 3-/8 (80mm) 32-5/6 (820mm) 6-/6 (0mm) <IN CASE OF BACK-SUCTION> 20-M5 HOLES 0 PROTECTION NET AIR FILTER (ACCESSORY) 8 SUSPENSION BRACKET POWER SUPPLY CONNECTION 6 INFRA RECEIVER UNIT CONNECTION 0 NOTE). IN CASE OF BACK-SUCTION, 5 CONTROL BOX MOUNT CHAMBER COVER TO BOTTOM SIDE OF THE UNIT. IN CASE OF BOTTOM-SUCTION, DRAIN HOSE (ACCESSORY) I.D.φ 3/32 (φ 25mm) (OUTLET) 6 MOUNT CHAMBER COVER TO BACK SIDE OF THE UNIT. 3 SOCKET FOR DRAIN VP20 O.D.φ -/32 (φ 26mm) 2. LOCATION OF UNIT'S NAME PLATE: CONTROL BOX COVER xp.3-5/6 (00mm)=2-/6 (00mm) 5-/8 (30mm) ( /I.D.φ 25/32 (φ 20mm) ) 3. MOUNT THE AIR FILTER AT THE SUCTION SIDE. 30-/6 (80mm) 3-5/6 (00mm) SELECT ITS COLORIMETHOD (GRAVITY METHOD) ( 50% OR MORE. ) 2 GAS PIPE CONNECTION φ /2 (φ 2.mm) (FLARE CONNECTION) 3-/2 (800mm) 3-/6 (0mm) 32-5/6 (820mm) 3-/8 (80mm) LIQUID PIPE CONNECTION φ / (φ 6.mm) (FLARE CONNECTION) IT CAN NOT BE EQUIPPED WITH AIR FILTER (ACCESSORY) < IN CASE OF BOTTOM-SUCTION > WHEN CONNECTING DUCT TO SUCTION SIDE. NUMBER NAME DESCRIPTION 3-5/6 (00mm) 6-5/6 (60mm) -/6 (80mm) 3D05268 SS-MXS 5

6 Dimensions Slim-Duct Indoor Units CDXS5/8LVJU 2-/6 (620mm) 35-/6 (00mm) -3/6 (300mm) OR MORE 2-/6 (620mm) (SERVICE SPACE) -/6 (500mm) (SUSPENSION BOLT PITCH) 3/6 (20mm) OR MORE 3/6 (20mm) OR MORE 5-3/ (00mm) OR MORE (IN CASE OF BOTTOM SUCTION) CEILING 35-/6 (00mm) (-3/) (5mm) ROOM TEMP. 2-3/ (3/6) -/2 (38mm) SENSOR (0mm) (20mm) TIMER LAMP < SERVICE SPACE > INDOOR UNIT 8 22-φ 3/6 (φ.mm) HOLES ON/OFF SWITCH 8xP.3-5/6 (00mm)=3-/2 (800mm) SIGNAL RECEIVER 3 (0mm) CORD (LENGTH: -3/6) ( :00mm) (SUSPENSION BOLT PITCH) 3-5/8 (880mm) INFRA RECEIVER UNIT 33-/8 (860mm) 5-/8 (30mm) 2-/2 (63mm) ARROW VIEW 3-/6 (0mm) xp.5-/8 (50mm)=23-5/8 (600mm) 3-/6 (0mm) INSPECTION DOOR (CEILING OPENING) SUSPENSION BOLT 2 -UNC5/6 ~ 3/8 (M8 ~ M0) 20-M5 HOLES /2 (2.5mm) 3/6 (2mm) 2-/ (5.5mm) 2-3/8 (60mm) -/8 (mm) 3-/6 (0mm) -/2 (20mm) OR MORE -3/6 (300mm) -3/ (20mm) SIGNAL TRANSMITTER /6 (8mm) 2-5/6 (58mm) (2-3/6) (2mm) -3/8 (8mm) (ARC52A23) 0-5/6 (50mm) 3/6 (20mm) 3/8 (0mm) -/8 (200mm) 6-/6 (0 mm) -/8 (200mm) -/6 (80mm) 6 (53mm) 6-5/6 (60mm) 3-/8 (80mm) 3-5/6 (00mm) 3/8 (0mm) 3/6 (20mm) -5/6 (50mm) 3-5/6 (00mm) /8 (23mm) 8-M HOLES -3/6 (30mm) 3 (330mm) 5-/8 (50 mm) xp.3-5/6 (00)=2-/6 (00mm) /6 (00 mm) 30-/6 (80mm) 3-/6 (0mm) 3-/2 (800mm) 3-/8 (80mm) 32-5/6 (820mm) 6-/6 (0mm) <IN CASE OF BACK-SUCTION> 20-M5 HOLES 0 PROTECTION NET AIR FILTER (ACCESSORY) 8 SUSPENSION BRACKET POWER SUPPLY CONNECTION 6 INFRA RECEIVER UNIT CONNECTION 0 NOTE). IN CASE OF BACK-SUCTION, 5 CONTROL BOX MOUNT CHAMBER COVER TO BOTTOM SIDE OF THE UNIT. IN CASE OF BOTTOM-SUCTION, DRAIN HOSE (ACCESSORY) I.D.φ 3/32 (φ 25mm) (OUTLET) 6 MOUNT CHAMBER COVER TO BACK SIDE OF THE UNIT. 3 SOCKET FOR DRAIN VP20 O.D.φ -/32 (φ 26mm) 2. LOCATION OF UNIT'S NAME PLATE: CONTROL BOX COVER xp.3-5/6 (00mm)=2-/6 (00mm) 5-/8 (30mm) ( /I.D.φ 25/32 (φ 20mm) ) 3. MOUNT THE AIR FILTER AT THE SUCTION SIDE. 30-/6 (80mm) 3-5/6 (00mm) SELECT ITS COLORIMETHOD (GRAVITY METHOD) ( 50% OR MORE. ) 2 GAS PIPE CONNECTION φ /2 (φ 2.mm) (FLARE CONNECTION) 3-/2 (800mm) 3-/6 (0mm) 32-5/6 (820mm) 3-/8 (80mm) LIQUID PIPE CONNECTION φ / (φ 6.mm) (FLARE CONNECTION) IT CAN NOT BE EQUIPPED WITH AIR FILTER (ACCESSORY) < IN CASE OF BOTTOM-SUCTION > WHEN CONNECTING DUCT TO SUCTION SIDE. NUMBER NAME DESCRIPTION 3-5/6 (00mm) 6-5/6 (60mm) -/6 (80mm) 3D05268 CDXS2LVJU -/8 -/8 2-/6 8 6-/6 /2 6 3/6 3/8 -/6 3/6 6-5/6 3-/8 2-/ 8-M HOLES -5/6 3-5/6 26-φ3/6 HOLE 0 (P3-5/6)=3-3/8 -/8 (SUSPENSION BOLT PITCH) SUSPENSION BOLT -M8~M0 2-/2-3/ 6 P5-/8=35-/6 (P3-5/6)=35-/6 38-/6 3-3/8 0-3/6 IN CASE OF BOTTOM-SUCTION -3/6 -/6 (SUSPENSION BOLT PITCH) 2-3/ /8 3-5/6 3-/6 3-/8 2-M5 HOLES 3/6 OR MORE 3/6 OR MORE 3-5/6-3/6 OR MORE 2-/6 (SERVICE SPACE) 5-3/ OR MORE (IN CASE OF BOTTOM SUCTION) -/8 3-/6 3-5/6 /8 2 SERVICE SPACE 5-/8 3 2-/2 -/6 OR MORE CEILING 3 5 NOTE). IN CASE OF BACK-SUCTION, MOUNT CHAMBER COVER TO BOTTOM SIDE OF THE UNIT. IN CASE OF BOTTOM-SUCTION, MOUNT CHAMBER COVER TO BACK SIDE OF THE UNIT. 2. LOCATION OF UNIT'S NAME PLATE: CONTROL BOX COVER 3. MOUNT THE AIR FILTER AT THE SUCTION SIDE. SELECT ITS COLORIMETHOD (GRAVITY METHOD) ( ) 50% OR MORE. IT CAN NOT BE EQUIPPED WITH AIR FILTER (ACCESSORY) WHEN CONNECTING DUCT TO SUCTION SIDE. 3-5/6-3/6 ARROW VIEW INSPECTION DOOR (CEILING OPENING) 2-M5 HOLES 6-/6 ROOM TEMP. SENSOR TIMER LAMP NUMBER (-3/) 2-3/ (3/6) -/2 /6 2-5/6-3/ INDOOR UNIT ON/OFF SWITCH SIGNAL RECEIVER CORD (LENGTH: -3/6) INFRA RECEIVER UNIT PROTECTION NET AIR FILTER (STANDARD ACCESSORY) SUSPENSION BRACKET POWER SUPPLY CONNECTION INFRA RECEIVER UNIT CONNECTION CONTROL BOX DRAIN HOSE (STANDARD ACCESSORY) SOCKET FOR DRAIN GAS PIPE CONNECTION LIQUID PIPE CONNECTION NAME (2-3/6) -3/8 5-/8 (P3-5/6)=35-/6 3-5/6 38-/6 3-/6 3-3/8 3-/8 0-3/6 IN CASE OF BACK-SUCTION SIGNAL TRANSMITTER (ARC52A23) 0-5/6 3/6 3/8 3-5/6 6-5/6 -/6 I.D. φ3/32 (OUTLET) VP20 (O.D. φ-/32/i.d. φ25/32) φ5/8 (FLARE CONNECTION) φ/ (FLARE CONNECTION) DESCRIPTION 3D SS-MXS

7 Dimensions Wall-Mount Indoor Unit CTXS0LVJU, FTXS0/2LVJU THE MARK ( ) SHOWS PIPING DIRECTION 3-/2 (800mm) REAR LEFT -3/6 (30mm) MIN (SPACE FOR PERFORMANCE) AIRFLOW (INDOOR) ( INCLUDING MOUNTING PLATE ) RIGHT 8-/6 (2mm) -5/6 (50mm) MIN 8-/6 (25mm) (SPACE FOR MAINTENANCE) NAME PLATE -5/8 (25mm) FRONT GRILLE FIXED SCREWS TERMINAL BLOCK WITH GROUND TERMINAL INTELLIGENT EYE SENSOR TIMER LAMP /6 (.5mm) INTELLIGENT EYE LAMP INDOOR UNIT ON/OFF SWITCH ROOM TEMP. THERMISTOR MODEL NAME PLATE SIGNAL TRANSMITTER UP/DOWN (AUTOMATIC) BLADE ANGLES -3/8 (8mm) COOLING, DRY FAN HEATING /8 (60mm) WALL HOLE φ2-/6 (φ65mm) HOLE 2-5/6 (5.5mm) WALL HOLE FOR EMBEDDED PIPING φ2-/6 (φ65mm) HOLE STANDARD LOCATIONS OF WALL HOLES 5 (ARC52A2) 23-/6 (586mm) 5-3/ (5.5mm) 65 RIGHT/LEFT (AUTOMATIC) DRAIN HOSE (CONNECTING PART O.D. φ5/8 (φ6mm) THE HOSE LENGTH OF OUTSIDE THE UNIT IS APPROX. 8-5/6 (65mm)) 3-/2 (800mm) -3/ (.5mm) 2-5/6 (58mm) /6 (8mm) GAS PIPE φ3/8 (φ.5mm) CuT (THE LENGTH OF PIPE OUTSIDE THE UNIT: ABOUT 3-3/ (350mm)) LIQUID PIPE φ/ (φ6.mm) CuT (THE LENGTH OF PIPE OUTSIDE THE UNIT: ABOUT 5-3/ (00mm)) -3/ (.5mm) SIGNAL RECEIVER FLAPS -5/6 (50mm) MIN (SPACE FOR MAINTENANCE) -5/8 (25mm) BOTTOM REQUI SPACE C: 3D00A FTXS5/8LVJU -5/6 (050mm) RIGHT MIN.-3/6 (30mm) (SPACE FOR PERFORMANCE) AIRFLOW (INDOOR) THE MARK ( )SHOWS PIPING DIRECTION REAR INCLUDING (INSTALLATION PLATE ) 3-3/8 (30mm) -3/6 (250mm) -3/ (28mm) NAME PLATE FRONT GRILLE FIXING SCREWS BOTTOM TERMINAL BLOCK WITH GROUND TERMINAL INTELLIGENT EYE SENSOR SIGNAL RECEIVER -3/8 (8mm) COOLING, DRY RIGHT/LEFT (AUTOMATIC) (ARC52A2) FAN HEATING /6 (050mm) 3-5/6 (mm) /8 (35.5mm) WALL HOLE FOR EMBEDDED WALL HOLE PIPING φ3-/8 (φ80mm) HOLE φ3-/8 (φ80mm) HOLE 2-/6 (65mm) 3-/2 (8mm) STANDARD LOCATIONS OF WALL HOLES 3-3/8 (30mm) UP/DOWN (AUTOMATIC) 8-/ (20mm) BLADE ANGLES 2-5/6 (58mm) /6 (8mm) DRAIN HOSE (CONNECTING PART O.D. φ5/8 (φ6mm) THE HOSE LENGTH OF OUTSIDE THE UNIT: ABOUT 8-5/6 (65mm)) -3/ (5mm) SIGNAL TRANSMITTER GAS PIPE φ/2 (φ2.mm) CuT (THE LENGTH OF PIPE OUTSIDE THE UNIT: ABOUT 5-3/ (00mm)) LIQUID PIPE φ/ (φ6.mm) CuT (THE LENGTH OF PIPE OUTSIDE THE UNIT: ABOUT 8-/8 (60mm)) /6 (.5mm) TIMER LAMP INTELLIGENT EYE LAMP INDOOR UNIT ON/OFF SWITCH ROOM TEMP. THERMISTOR MODEL NAME PLATE -3/ (5mm) FLAPS SS-MXS MIN.-5/6 (50mm) MIN.-5/6 (50mm) (SPACE FOR (SPACE FOR MAINTENANCE) REQUI SPACE MAINTENANCE) 5/8 (6mm) LEFT C: 3D002A

8 Dimensions Wall-Mount / Floor-Standing Indoor Units FTXS2LVJU RIGHT INCLUDING ( INSTALLATION PLATE ) -3/6 (250mm) -3/ (28mm) 3-3/8 (30mm) BOTTOM /6 (.5mm) 5 FAN RIGHT/LEFT (AUTOMATIC) (ARC52A2) /6 (mm) WALL HOLE FOR EMBEDDED PIPING φ3-/8 (φ80mm) HOLE 2-/6 (65mm) WALL HOLE φ3-/8 (φ80mm) HOLE 3-/2 (8mm) STANDARD LOCATIONS OF WALL HOLES 5-3/8 (35.5mm) 8-/ (20mm) -3/8 (8mm) HEATING -5/6 (050mm) -3/ (5mm) BLADE ANGLES 5 5/8 (6mm) MODEL NAME PLATE UP/DOWN (AUTOMATIC) COOLING, DRY DRAIN HOSE (CONNECTING PART O.D. φ5/8 (φ6mm) THE HOSE LENGTH OF OUTSIDE THE UNIT: ABOUT 8-5/6 (65mm)) GAS PIPE φ5/8 (φ5.mm) CuT (THE LENGTH OF PIPE OUTSIDE THE UNIT: ABOUT 5-3/ (00mm)) LIQUID PIPE φ/ (φ6.mm) CuT (THE LENGTH OF PIPE OUTSIDE THE UNIT: ABOUT 8-/8 (60mm)) -3/ (5mm) TIMER LAMP INTELLIGENT EYE LAMP INDOOR UNIT ON/OFF SWITCH ROOM TEMP. THERMISTOR SIGNAL TRANSMITTER 2-5/6 (58mm) /6 (8mm) TERMINAL BLOCK WITH GROUND TERMINAL INTELLIGENT EYE SENSOR SIGNAL RECEIVER FLAPS MIN. -5/6 (50mm) MIN. -5/6 (50mm) (SPACE FOR (SPACE FOR MAINTENANCE) REQUI SPACE MAINTENANCE) NAME PLATE FRONT GRILLE FIXING SCREWS 3-3/8 (30mm) LEFT -5/6 (050mm) MIN. -3/6 (30mm) (SPACE FOR PERFORMANCE) AIRFLOW (INDOOR) THE MARK ( ) SHOWS PIPING DIRECTION REAR C: 3D0362A FVXS0/2NVJU 2-/6 (00mm) 26-/ (666mm) (HALF CONCEALED) -3/ (2mm) -3/ (20.5mm) 23 (58mm) (HALF CONCEALED) 6 (52mm) /8 (2.5mm) 5 LOWER AIR OUTLET 5 UPWARD AIR FLOW LIMIT [ON] 5 0 UPWARD AIR FLOW LIMIT [OFF] HEAT ARC66A2 COOL, DRY 0 2-5/6 (58.5mm) UP/DOWN (AUTOMATIC) UPPER AIR OUTLET SIGNAL TRANSMITTER -5/6 (50mm) MIN (FOR MAINTENANCE AND PERFORMANCE) HOLE FOR PIPING 5-3/8 (36mm) 0-5/6 (50mm) MIN WALL HOLE FOR HALF CONCEALED (FOR MAINTENANCE AND PERFORMANCE) -3/ (mm) -/2 (38.5mm) -/6 (8mm) REQUI SPACE HOLE FOR SPLINT 20 -/2 (5mm) /6 (mm) 3-/ (82mm) RIGHT/LEFT (MANUAL) HOLE FOR PIPING 2-3/ (0mm) 2-3/ (0mm) (FOR PERFORMANCE) AIR FLOW DRAIN HOSE VP20 I.D. φ3/6 (φ20mm) O.D. φ (φ26mm) L8-/6 (220mm) /6 (630mm) FIXED SCREWS FOR MAIN UNIT -/2 (38.5mm) NAME PLATE 6-5/6 (60mm) 3-3/8 (85mm) FIXED SCREWS FOR FRONT PANEL 5-/8 (mm) ROOM TEMP. THERMISTOR TERMINAL BLOCK WITH GROUND TERMINAL LIQUID PIPE (φ/ (φ6.mm CuT)) GAS PIPE (φ3/8 (φ.5mm CuT)) 3-/6 (0mm) 3-/6 (0mm) MODEL NAME LABEL 8-/ (20mm) 0 23-/6 (585mm)~23-/6 (55mm) (WALL HOLE) 3-3/ (5mm) INDOOR UNIT ON/OFF SWITCH (HALF CONCEALED) AIR OUTLET SELECTION SWITCH DRAIN SOCKET HOLE FOR SPLINT HOLE FOR PIPING 3-/ (82mm) 8 TIMER LAMP SIGNAL RECEIVER 23-5/8 (600mm) 0-/ (26mm) 8-5/8 (28.5mm) 2-3/ (0mm) FIXED SCREWS FOR FRONT PANEL /6 (mm) 26-3/8 (60mm)~2-3/6 (60mm) (WALL HOLE) -3/ (20.5mm) -/6 (30mm) -/6 (230mm) 5-3/ (00mm) 25-3/8 (6mm) MAIN UNIT FIXING SCREW -3/6 (250mm) NOTE). THE MARK ( ) SHOWS PIPING DIRECTION ADJUSTING THE AIR FLOW DIRECTION C: 3D058 SS-MXS

9 Dimensions Floor-Standing Indoor Units FVXS8NVJU NOTE). THE MARK ( ) SHOWS PIPING DIRECTION -/6 (30mm) -/6 (230mm) 23-/6 (585mm)~23-/6 (55mm) (WALL HOLE) 25-3/8 (6mm) MAIN UNIT FIXING SCREW 26-3/8 (60mm)~2-3/6 (60mm) (WALL HOLE) WALL HOLE FOR HALF CONCEALED -3/6 (250mm) 5-3/ (00mm) -3/ (20.5mm) 3-/6 (0mm) /6 (mm) HOLE FOR SPLINT HOLE FOR PIPING 3-/ (82mm) 3-3/8 (85mm) 2-/6 (00mm) 26-/ (666mm) (HALF CONCEALED) TIMER LAMP 8-/ (20mm) ROOM TEMP. THERMISTOR SIGNAL RECEIVER 3-3/ (5mm) TERMINAL BLOCK INDOOR UNIT ON/OFF SWITCH (HALF CONCEALED) WITH GROUND TERMINAL 23-5/8 (600mm) 0-/ (26mm) 8-5/8 (28.5mm) 2-3/ (0mm) LIQUID PIPE (φ/ (φ6.mm CuT)) GAS PIPE (φ/2 (φ2.mm CuT)) 3-/6 (0mm) -3/ (20.5mm) 23 (58mm) (HALF CONCEALED) NAME PLATE /6 (mm) FIXED SCREWS FOR FRONT PANEL DRAIN HOSE 3-/ (82mm) HOLE FOR SPLINT 2-3/6 (630mm) VP20-3/ (2mm) I.D. φ3/6 (φ20mm) HOLE FOR PIPING FIXED SCREWS FOR MAIN UNIT O.D. φ (φ26mm) 5-3/8 (36mm) L8-/6 (220mm) 6 (52mm) 5-/8 (mm) 6-5/6 (60mm) RIGHT/LEFT (MANUAL) UP/DOWN (AUTOMATIC) -/2 (38.5mm) HOLE FOR PIPING -3/ (mm) UPPER AIR OUTLET COOL, DRY HEAT -/2 (5mm) 2-3/ (0mm) -/2 (38.5mm) AIR FLOW UPWARD SIGNAL TRANSMITTER REQUI SPACE AIR FLOW LIMIT 2-5/6 (58.5mm) /8 (2.5mm) [OFF] -5/6 (50mm) MIN (FOR MAINTENANCE AND PERFORMANCE) FIXED SCREWS FOR FRONT PANEL 2-3/ (0mm) (FOR PERFORMANCE) -5/6 (50mm) MIN (FOR MAINTENANCE AND PERFORMANCE) MODEL NAME LABEL -/6 (8mm) ARC66A2 AIR OUTLET SELECTION SWITCH DRAIN SOCKET 5 5 LOWER AIR OUTLET 5 5 UPWARD AIR FLOW LIMIT [ON] ADJUSTING THE AIR FLOW DIRECTION C: 3D SS-MXS

10 Wiring Diagrams Indoor Units CTXS0LVJU, FTXS0/2LVJU PCB3 SW BZ LED HP LED2 H2P LED3 H3P RTH RT HA S S25 PCB S26 S S32 S INTELLIGENT EYE SENSOR WIRELESS REMOTE CONTROLLER S S6 PCB FU XM 2 FU H ~ 3.5A 2 3 OUTDOOR C02 V - MR0 H2 3 FIELD WIRING. C0 / H3 TRANSMISSION CIRCUIT CAUTION S2 FG NOTE THAT OPERATION WILL RESTART AUTOMATICALLY IF THE MAIN POWER SUPPLY IS TURNED OFF AND THEN BACK ON AGAIN. PCB2 S8 3 SIGNAL RECEIVER R2T PNK PNK PNK MSW MS MSW M2S MSW M3S MS 3~ MF INDOOR BZ C0, C02 FG FU HP~H3P MR0 MF MS~M3S PCB~PCB RT, R2T S~S SW V XM : BUZZER : CAPACITOR : FRAME GROUND : FUSE : PILOT LAMP : MAGNETIC RELAY : FAN MOTOR : SWING MOTOR : PRINTED CIRCUIT BOARD : THERMISTOR : OPERATION SWITCH : VARISTOR : TERMINAL STRIP : PROTECTIVE GROUND C: 3D05826L FTXS5/8/2LVJU PCB3 S S6 PCB FU XM 2 LED FU H HP ~ 3.5A 2 3 OUTDOOR C02 V LED2-3 MR0 - + H2 H2P LED3 FIELD WIRING. H3P C0 TRANSMISSION H3 / CIRCUIT CAUTION SW NOTE THAT OPERATION WILL RESTART S2 FG AUTOMATICALLY IF THE MAIN POWER SUPPLY IS TURNED OFF AND THEN BACK ON AGAIN. BZ PCB RTH RT INTELLIGENT EYE SENSOR WIRELESS REMOTE CONTROLLER HA S25 S36 3 PCB2 S8 SIGNAL RECEIVER S S S32 S R2T PNK PNK PNK MSW MS MSW M2S MSW M3S INDOOR MS 3~ MF BZ C0, C02 FG FU HP~H3P MR0 MF MS~M3S PCB~PCB RT, R2T S~S SW V XM : BUZZER : CAPACITOR : FRAME GROUND : FUSE : PILOT LAMP : MAGNETIC RELAY : FAN MOTOR : SWING MOTOR : PRINTED CIRCUIT BOARD : THERMISTOR : OPERATION SWITCH : VARISTOR : TERMINAL STRIP : PROTECTIVE GROUND C: 3D0602Q 0 SS-MXS

11 Wiring Diagram Indoor Units FDXS0/2LVJU, CDXS5/8/2LVJU A2P LED LED LED S HP H2P H3P SW XM AP H 2 2 FU VTR 3 3.5A 3 OUTDOOR S26 SIGNAL RECEIVER 0 0 2RTH 2 S32 t RT WIRELESS REMOTE CONTROLLER ( ) TERMINAL FOR CENTRALIZED CONTROL S2 S : PROTECTIVE GROUND C : CAPACITOR (MF) FU : FUSE 6 3 TRANSMISSION CIRCUIT S 3 C HP~H3P MF AP~A2P M QM t PPL ~ QM INDOOR RT~R2T 30 C R2T MF S~S32, RTH SW VTR XM H2 H3 GND / FIELD WIRING. CAUTION NOTE THAT OPERATION WILL RESTART AUTOMATICALLY IF THE MAIN POWER SUPPLY IS TURNED OFF AND THEN BACK ON AGAIN. : PILOT LAMP : FAN MOTOR : PRINTED CIRCUIT BOARD : THERMAL PROTECTOR (FOR MOTOR) : THERMISTOR : OPERATION SWITCH : TRIAC : TERMINAL BLOCK C: 3D038B FVXS0/2/8NVJU WIRELESS REMOTE CONTROLLER PCB3 PCB2 FU XM V H ~ ~ 2 S2 S26 S2W() RECTIFIER 3.5A 2 3 OUTDOOR SW H2 3 / MR0 FIELD WIRING. H3 E E3 TRANSMISSION CIRCUIT V2 PCB CAUTION SA E NOTE THAT OPERATION WILL SIGNAL S S6 SW RESTART AUTOMATICALLY IF RECEIVER F2U S THE MAIN POWER SUPPLY IS E3 TURNED OFF AND THEN BACK LED LED2 3.5A ON AGAIN. M MF HP INDOOR MS M2S H2P S2 S2 HA S8 S M PNK RT 6 PCB S M S32 PNK 5 R2T : PROTECTIVE GROUND FU, F2U : FUSE HP, H2P : PILOT LAMP MF : FAN MOTOR MS : SWING MOTOR M2S : LOWER AIR OUTLET MOTOR PCB~PCB : PRINTED CIRCUIT BOARD RT, R2T : THERMISTOR S~S SW : OPERATION SWITCH S2W() : UPWARD AIR FLOW LIMIT SWITCH SW : AIR OUTLET SELECTION SWITCH XM : TERMINAL STRIP E3 : GROUND TERMINAL (HEAT EX.) E : GROUND TERMINAL (SHIELD PLATE) C: 3D0060 SS-MXS

12 Wiring Diagrams Indoor Units FFQ0/2/5/8LVJU AP C FU HAP KPR MF MP MS QM RT R2T R3T SL TR VTR XM X2M RC TC PRINTED CIRCUIT BOARD CAPACITOR (MF) FUSE (F, 5A, 250V) PILOT LAMP (SERVICE MONITOR GREEN) MAGNETIC RELAY (MP) FAN MOTOR DRAIN PUMP MOTOR SWING LOUVER MOTOR THERMAL PROTECTOR FOR MOTOR THERMISTOR (AIR) THERMISTOR (COIL-) THERMISTOR (COIL-2) FLOAT SWITCH TRANSFORMER ( V/25V) TRIAC TERMINAL BLOCK TERMINAL BLOCK SIGNAL RECEIVER CIRCUIT SIGNAL TRANSMISSION CIRCUIT X0A WI REMOTE CONTROLLER RT THERMISTOR (AIR) WI REMOTE CONTROLLER (RECEIVER/DISPLAY UNIT) A3P PRINTED CIRCUIT BOARD AP PRINTED CIRCUIT BOARD BS PUSH BUTTON SWITCH (ON/OFF) XM AP CONTROL BOX HP PILOT LAMP (ON-) H2P PILOT LAMP (TIMER-GREEN) H3P PILOT LAMP (FILTER SIGN-) HP PILOT LAMP (DEFROST-ORANGE) SS SELECTOR SWITCH (MAIN/SUB) SS2 SELECTOR SWITCH (WIRELESS ADDRESS SET) CONNECTOR FOR OPTIONAL PARTS X2A X33A X35A CONNECTOR (WIRELESS REMOTE CONTROLLER) CONNECTOR (ADAPTOR FOR WIRING) CONNECTOR (GROUP CONTROL ADAPTOR) CONNECTOR (ON/OFF INPUT FROM OUTSIDE) TR X2M C TO OUTDOOR UNIT R3T RT R2T AP X2M XA X8A XA X2A NOTE) FU NOTE)3 2 F2 X0A TR XA F 3 P2 P2 / X2A P P X5A XMC KPR AP A3P AP SS HP H2PBS X25A SS2 H3P M X2A X2A HP RC TC NOTES) ~ NOTE)3 XA XA MP. : TERMINAL : FIELD WIRING RECEIVER/DISPLAY UNIT (OPTIONAL ACCESSORY), : PROTECTIVE GROUND (SCREW) VTR X20A X36A NOTE)3 HAP X33A NOTE)3 X0A NOTE)3 X35A X5A : NOISELESS GROUND 2. IN CASE USING CENTRAL REMOTE CONTROLLER, CONNECT IT TO THE UNIT IN ACCORDANCE WITH THE ATTACHED INSTALLATION MANUAL. 3. X2A, X33A, X35A AND X0A ARE CONNECTED WHEN THE OPTIONAL ACCESSORIES ARE USED.. GROUND THE SHIELD OF THE REMOTE CONTROLLER CORD TO THE INDOOR UNIT (IN CASE OF USING SHIELD WIRE). 5. SYMBOLS SHOW AS FOLLOWS: : : BLACK : WHITE : YELLOW : GREEN : E : CONNECTER DISCRIMINATION COLOR FOR COMPONENTS. : CONNECTER COLOR FOR COMPONENTS. : CONNECTER COLOR FOR PRINTED CIRCUIT BOARD. M ~ QM MF MSW MS SL WI REMOTE CONTROLLER (OPTIONAL ACCESSORY) RT C: 3D08035A 2 SS-MXS

13 Wiring Diagram Outdoor Units 2MXS8NMVJU POWER SUPPLY L L2 / MC PCB2 SW2 SW SW6 XM LED A SW SW3 SW5 L L2 S2 MF ZC Z2C N= S50 S502 IN CASE OF N=3 5 HEAT PUMP TYPE X2M MS Z5C N=2 YS XA 2 2 Z6C 3 3 PCB E E2 N= Z3C S20 S202 5 N=3 X3M SA FU W V U 2 2 HL 30A V2 MRM20 S80 S0 3 3 V3 ZF MRM0 MR HN PPL SKY TO INDOOR UNIT ROOM B TO INDOOR UNIT ROOM A ZC N=3 S FU 3.5A V0 PS DB DC+ V C0 W U - - DC- IPM ROOM A ROOM B ROOM C ROOM D S2 S3 S0 S0 S20 5 S2 5 S22 5 S ~ ~ FU2 3.5A MS 3~ M YE M Y2E RT R0T RT R5T R3T R2T RT QL (ROOM A) (ROOM B) (ROOM A) (ROOM B) (OUTDOOR) (CONDENSER) (DISCHARGE) SHEET METAL INDOOR OUTDOOR <GAS PIPE> <LIQUID PIPE> FIELD WIRING C0 DB FU, FU2, FU3 IPM L, L2 LED~LED5, LEDA MC MF : CAPACITOR : DIODE BRIDGE : FUSE : INTELLIGENT POWER MODULE : LIVE : PILOT LAMP : COMPRESSOR MOTOR : FAN MOTOR MRM0, MRM20 MR PCB, 2 PS QL RT~R5T, RT, R0T SA SHEET METAL : MAGNETIC RELAY : MAGNETIC RELAY : PRINTED CIRCUIT BOARD : SWITCHING POWER SUPPLY : OVERLOAD PROTECTOR : THERMISTOR : SURGE ARRESTER : TERMINAL STRIP FIXED PLATE SW SW2 SW3 SW SW5 SW6 V2, V3, V0 XM~X3M : FORCED OPERATION ON/OFF SW (SW) : FORCED OPERATION MODE SELECT SW (SW2) : WIRING ERROR CHECK SW (SW3) : PRIORITY ROOM SETTING SW (SW) : FUNCTION SW (SW5) : NIGHT QUIET MODE SETTING SW (SW6) : VARISTOR : TERMINAL STRIP YE~Y2E YS ZC~Z6C ZF S, S2~S502 U, V, W XA : ELECTRONIC EXPANSION VALVE COIL : REVERSING SOLENOID VALVE COIL : FERRITE CORE : NOISE FILTER 3D0258 SS-MXS 3

14 Wiring Diagrams Outdoor Units 3MXS2NMVJU / PCB2 SW2 SW SW6 XM MC POWER SUPPLY LED A SW SW3 SW5 L L MS L2 L2 S2 ZC MF 3~ S50 S502 IN CASE OF N=3 Z2C N= 5 HEAT PUMP TYPE MS TO INDOOR UNIT X2M ROOM B Z5C N=2 YS XA 2 2 Z6C 3 3 PCB E E2 N= Z3C 5 N=3 SA S20 S202 TO INDOOR UNIT X3M ROOM A FU3 3 2 W V 3 U 30A V2 MRM20 S80 S0 2 2 HL 3 3 MRM0 MR V3 ZF XM HN FU2 DB 3.5A DC+ W V U 2 2 FU V0 PS ~ A C0 S ~ - - DC- IPM S2 S3 S0 S0 S20 5 S2 5 S22 5 S M M M YE Y2E Y3E t t RT R0T RT RT R5T R6T R3T R2T RT QL (ROOM A) (ROOM B) (ROOM C) (ROOM A) (ROOM B) (ROOM C) (OUTDOOR) (CONDENSER) (DISCHARGE) PPL SKY TO INDOOR UNIT ROOM C ZC N=3 ROOM A ROOM B ROOM C ROOM D SHEET METAL INDOOR OUTDOOR <GAS PIPE> <LIQUID PIPE> FIELD WIRING C0 DB FU, FU2, FU3 IPM L, L2 LED~LED5, LEDA MC MF : CAPACITOR : DIODE BRIDGE : FUSE : INTELLIGENT POWER MODULE : LIVE : PILOT LAMP : COMPRESSOR MOTOR : FAN MOTOR MRM0, MRM20 MR PCB, 2 PS QL RT~R6T, RT~RT SA SHEET METAL : MAGNETIC RELAY : MAGNETIC RELAY : PRINTED CIRCUIT BOARD : SWITCHING POWER SUPPLY : OVERLOAD PROTECTOR : THERMISTOR : SURGE ARRESTER : TERMINAL STRIP FIXED PLATE SW SW2 SW3 SW SW5 SW6 V2, V3, V0 XM~XM : FORCED OPERATION ON/OFF SW (SW) : FORCED OPERATION MODE SELECT SW (SW2) : WIRING ERROR CHECK SW (SW3) : PRIORITY ROOM SETTING SW (SW) : FUNCTION SW (SW5) : NIGHT QUIET MODE SETTING SW (SW6) : VARISTOR : TERMINAL STRIP YE~Y3E YS ZC~Z6C ZF S, S2~S502 U, V, W XA : ELECTRONIC EXPANSION VALVE COIL : REVERSING SOLENOID VALVE COIL : FERRITE CORE : NOISE FILTER 3D SS-MXS

15 Wiring Diagram Outdoor Units MXS36NMVJU / PCB2 SW2 SW SW6 MC POWER SUPPLY XM LED A SW SW3 SW5 L L MS L2 L2 S2 MF 3~ ZC S50 S502 IN CASE OF Z2C N= 5 TO INDOOR UNIT N=3 HEAT PUMP TYPE MS ROOM B X2M Z5C N=2 YS XA 2 2 Z6C 3 3 PCB E E2 N= Z3C S20 S202 5 N=3 TO INDOOR UNIT SA X3M ROOM A FU W V U 2 2 HL 30A V2 MRM20 S80 S0 PPL SKY 3 3 MRM0 MR V3 ZF XM HN 2 2 FU V0 PS ~ A TO INDOOR UNIT ROOM C DB DC+ W V U C0 + TO INDOOR UNIT ROOM D X5M S DC- ZC N=3 ROOM A ROOM B ROOM C ROOM D S2 S3 S0 S0 S20 5 S2 5 S22 5 S ~ - FU2 3.5A + - IPM M M M M Y2E YE YE Y3E R T R 0 T RT R2T RT R5T R 6T R T R3T R2T RT QL (ROOM A) (ROOM B) (ROOM C) (ROOM D) (ROOM A) (ROOM B) (ROOM C) (ROOM D) (OUTDOOR) (CONDENSER) (DISCHARGE) INDOOR SHEET METAL OUTDOOR <GAS PIPE> <LIQUID PIPE> FIELD WIRING C0 DB FU, FU2, FU3 lpm L, L2 LED~LED5, LEDA MC MF : CAPACITOR : DIODE BRIDGE : FUSE : INTELLIGENT POWER MODULE : LIVE : PILOT LAMP : COMPRESSOR MOTOR : FAN MOTOR MRM0, MRM20 MR PCB, 2 PS QL RT~RT, RT~R2T SA SHEET METAL : MAGNETIC RELAY : MAGNETIC RELAY : PRINTED CIRCUIT BOARD : SWITCHING POWER SUPPLY : OVERLOAD PROTECTOR : THERMISTOR : SURGE ARRESTER : TERMINAL STRIP FIXED PLATE SW SW2 SW3 SW SW5 SW6 V2, V3, V0 XM~X5M : FORCED OPERATION ON/OFF SW (SW) : FORCED OPERATION MODE SELECT SW (SW2) : WIRING ERROR CHECK SW (SW3) : PRIORITY ROOM SETTING SW (SW) : FUNCTION SW (SW5) : NIGHT QUIET MODE SETTING SW (SW6) : VARISTOR : TERMINAL STRIP YE~YE YS ZC~Z6C ZF S, S2~S502 U, V, W XA : ELECTRONIC EXPANSION VALVE COIL : REVERSING SOLENOID VALVE COIL : FERRITE CORE : NOISE FILTER 3D08856 SS-MXS 5

16 Wiring Diagram Outdoor Unit Accessories Indoor Unit BRCE2 BRCB2-A08 BYFQ60B3W DACA-CP3- DACA-TS- Wired Navigation Remote Controller (For FFQ Ceiling Cassette Only) Wired Controller (For Wall Mount and Slim Duct Units Only) with a 26' cord Decoration Panel for FFQ Ceiling Cassette, ships separately at no charge Condensate Pump with Integral Float Switch Daikin ENVi Intelligent Thermostat Kit (For Wall Mount and Slim Duct Units Only) BP Unit KHRP26A22T REFNET Joint Outdoor Unit DACA-WB-3 Powder Coated Wall Mounted Bracket Our continuing commitment to quality products may mean a change in specifications without notice. 205 Houston, Texas Printed in the USA. 6 SS-MXS