IN03TM01 TH27TM01 IN03TM02 LAMELLO FOR BISCUIT JOINTERS IN03TM LAMELLO FOR BISCUIT JOINTERS TH27TM
|
|
- Antony Farmer
- 7 years ago
- Views:
Transcription
1 DYNAMIC LINE 8900 Zalaegerszeg Ola. u. 44. Tel. Fax: 92/ , 525, 92/ , E mail: info@diamant-gepszerviz.hu
2 IN03TM01 LAMELLO FOR BISCUIT JOINTERS D B d Z V cikkszám FT IN03TM TH27TM01 LAMELLO FOR BISCUIT JOINTERS D B d Z V ITEM FT TH27TM IN03TM02 GROOVE CUTTER MINI SPOT IN03TM
3 IR20TM ADJUSTABLE GROOVE CUTTER HW brazed cutter with spurs for making precision grooves with various thickness (from 4 to 14 mm). The tool is complete with spacing rings , IR20TM , IR20TM , IR20TM , IR20TM TH23TM ADJUSTABLE CUTTERHEAD WITH REVERSIBLE KNIVES FOR THIN GROOVES Cutterhead with HW reversible knives and spurs for making thin precision grooves (from 4 to 7,5 mm), adjustable by means of spacing rings. With the additional central element (type B) ON REQUEST we can expand the adjustment range from 4-7,5 to 4-15 mm , TH23TM , TH23TM , TH23TM
4 TH09TM ADJUSTABLE CUTTERHEAD WITH REVERSIBLE KNIVES FOR GROOVES Cutterhead with HW reversible knives and spurs for making precision grooves, adjustable by means of spacer rings. With the additional central element (type B) ON REQUEST we can expand the adjustment range TH09TM TH09TM TH09TM , TH09TM , TH09TM , TH09TM TH09TM TH09TM TH09TM
5 TH06TM10 ADJUSTABLE SET FOR TENONS Cutterhead in steel with knives and spurs in HW for making tenons and adjustable grooves (from 8 to 15 mm). The tool is supplied complete with spacer rings. Ø D max 100 max Ø d TH06TM TH06TM TH06TM
6 TH17TM ADJUSTABLE CUTTERHEAD FOR BEVELLING Cutterhead with HW reversible knives. The two wings are adjustable degree by degree from 0 to 70. Due to the particular construction, this tool is of universal use. The tool can also be used as a rebate cutterhead if matched with element B (spur holder) and if wings are positioned at B max = 48 1A 5 - B max = B max = B max = B max = B max = B max = B max = B max = B max = B max = B max = B max = B max = 15 B B 1A TH17TM TH17TM TH17TM
7 TH02TM04 CUTTERHEAD WITH REVERSIBLE STRAIGHT KNIVES AND SPURS, STEEL BODY Cutterhead with two alternate shear knives and light alloy body for extremely accurate rebates. Suitable for solid softwood, chipboard, veneered and laminatedd panels, plywood, etc TH02TM TH02TM TH02TM YH151ACM CUTTERHEAD WITH REVERSIBLE STRAIGHT KNIVES AND SPURS, LIGHT ALLOY BODY. Cutterhead with two alternate shear knives and light alloy body for extremely accurate rebates. Suitable for solid softwood, chipboard, veneered and laminatedd panels, plywood, etc YH151ACM YH151ACM YH151ACM 27500
8 YS107AZM R MULTIRADIUS SETS This set have been conceived to produce a variety of radius profiles. The first set consists of a 113 mm diameter head with two r=5 and r=10 mm knives mounted on the tool and four spare r=3, r=6 mm, r=4 and r=8 mm knives. 3 PAIRS OF KNIVES INCLUDED YS107AZM YS108AZM R MULTIRADIUS SETS The set consists of a 132 mm diameter head with two r=15 ad r=20 mm knives mounted on the tool and two spare r=12 and r=18 mm knives. Head is manufactured in light alloy. 2 PAIRS OF KNIVES INCLUDED YS108AZM 55125
9 YH152ACM LONG GRAIN JOINT CUTTERHEAD Cutterhead in light alloy with two knives for long grain jointing Cutterhead in light alloy with two knives, which is particularly suitable for jointing alongthe grain. The positioning screw on the tool allows high precision working YH152ACM YH152ACM YH152ACM YH131AAM 45 bevel CUTTERHEAD Cutterhead with two knives and light alloy body for extremely accurate 45 bevels YH131AAM D B d Z V ITEM net YH131AAM 33100
10 YH133AAM 45 MITRE JOINT CUTTERHEAD ( mm. ) Cutterhead in light alloy with two knives for 45 joints. The joint is obtained by two subsequent working phases: the first with the piece being worked in horizontal position and the second with the piece of wood in vertical position Ø D YH133AAM YH133AAM YH133BAM 41900
11 6 B TH70TM 1/4 round set R Set supplied in a wooden box Set supplied in wooden box with knives with two cutting edges and axial angle in HW for quarter rounds. The heads can be fitted with all the profiles indicated in the table Ø D Ø 125 Ø d Dim./Dim./Abm. R (mm) Art. Nr. Nr. pz./pc./st. 20x24x x24x x24x x24x x24x x24x TH70TM TH70TM TH70TM PAIRS OF KNIVES INCLUDED
12 YS118AZM Rounging and bevelling single moulding set R and 45 Set in light alloy consisting of two elements. Element 1 is equipped with a profiled knife that allows 45 chamfering on one side and cut round profiles on the other (r= mm). Element 2 allows both planning the straight part of the panel and the rounding and chamfering of the bottom part. Furthermore, the set includes spacing rings for the adjustment of the 2 elements. 5 Profiles on request YH142AAM 1 YH142AAM (18-50) YH143AAM (18-50) 6 6 YH143AAM Ø max 50 Ø max 50 Ø 125 Z=2 HW Ø 125 Z=2 HW YH142AAM r r r r r YH143AAM r r r r r profile included! YS118AZM YS118AZM YS118AZM 88200
13 YS112AZM DOORS ( mm ) AND KITCHEN CABINET ( mm ) TOOLING SET FOR PROFILES AND COUNTERPROFILES The set, complete with 3 cutterheads and spacer rings, has been developed to make door profiles and counterprofiles with the maximum flexibility possible (five different profiles). The adjustable groover included can also be used individually to create 8 to 15 mm thick adjustable grooves. Moreover, thanks to the positioning screw, on the shaped head, fitting of the spare knives is easy and precise. 4 Profiles on request profile " A " included! YS112AZM YS112AZM YS112BZM
14 YS101AZM KITCHEN CABINET SETS ( mm ) COUNTERPROFILE RAISING PANEL The set consists of two cutterheads with aluminium bodies. The cutterhead for profile and counterprofile cutting is supplied with HW knives so to obtain profile A (see drawing) but can also use HW knives to obtain profile B, C and D that are supplied only on specific request. The raising panel cutterhead fits four HW knives positioned with shear angle and permits to obtain the three profiles below indicated profile " A " included! 4 Profiles on request A B C D 120/ YS101AZM / YS101AZM / YS101BZM 75000
15 YS113AZM TONGUE AND GROOVE TOOLING SET ( mm ) This set has been conceived for various types of flooring and wall panels in variable wood thicknesses. Various cutterheads for producing five different types of wall panels can be added to the basic set that consists of two groups in light alloy for flooring. The tools are supplied with spacer rings Ft 8.5 Ø 123 Ø Ø Ø Ø A4 18 Ø 86 Ø Ø A4 9 Ø 140 Ø B4 4 4 B4 8 Ø Ø YS113AZM
16 YS109AZM PANEL RAISING SET ( 3 profiles!! ) Cutterhead in light alloy with two knives for working twelve different wood profiles (two profiles per knife A-B-C-D-E-F). Thanks to the special knife positioning pin, working and replacement of the knives is easier and more precise. The tool is available in two different sets. The first consisting of the cutterhead including two A type knives and four spare knives for B and C shaped profiles. The second set consist of the cutterhead including two D knives and four spare knives for E and F shaped-straight profiles. ØD(mm) B(mm) Ød(mm) Z MAN / HW 3 PAIRS OF KNIVES INCLUDED A YS109AZM B C D YS110AZM E F PAIRS OF KNIVES INCLUDED YS109AZM Panel raising only with profile A YH112AAM PLASTIC BOX NOT INCLUDED
17 HSS planer knives L H T Ft Ft 955 Ft 1100 Ft 1250Ft 1320 Ft 1390 Ft 1540 Ft 1755 Ft 1830Ft 1980 Ft 2200 Ft 2300 Ft 3660 Ft 3740 Ft 4400 Ft 4620 Ft 7320 Ft 7910 Ft L H T Ft Ft 1010 Ft 1160 Ft 1320 Ft 1390 Ft 1320 Ft 1630 Ft 1860 Ft 1500 Ft 2100 Ft 2315 Ft 2400 Ft 3900 Ft 4000 Ft 4650 Ft 4900 Ft 7720 Ft 8340 Ft HSS serrated back knives Code Dimensions net CT050S11 CT050S22 CT050S34 650X50X8 650X60X8 650X70X Ft Ft Ft
172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
More informationHOW-TO LAY HARDBOARD OR PLYWOOD FLOOR OVERLAY
HOW-TO HOW-TO LAY HARDBOARD OR PLYWOOD FLOOR OVERLAY Most floor coverings, if laid over uneven wooden floors, will wear unevenly and look unsightly. The answer is to cover the old boards with hardboard
More informationFREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials
Do not try to make your ornithopter using "household materials". If you want it to fly, you have to build it right. FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Wingspan: 16 inches Weight: 1/4 ounce The Ornithopter
More informationSafe use of vertical spindle moulding machines
HSE information sheet Safe use of vertical spindle moulding machines Woodworking Information Sheet No 18 (Revised) Introduction This information sheet is one of a series prepared by HSE's Woodworking National
More informationTOOLS FOR SELF RELIANCE REFURBISHING SHEET No 2. Registered Charity No 280437. Saws for Woodworking
Registered Charity No 280437 Saws for Woodworking Issued December 2002 Registered Charity No 280437 page no 1 SAW TYPES Rip saw For cutting along the grain Crosscut saw [A smaller version is known as a
More informationCarbide Insert Tooling
Carbide Insert Tooling Carolina Specialty Tools, Inc. is a manufacturer of standard and custom carbide insert tooling. We have the latest in CNC - Lathes, Mills, Profile Grinders. With our design and manufacturing
More informationHow to make a. Cabinet Door. trend. r o u t i n g t e c h n o l o g y. A 65 page guide to using profile scribing and raised panel cutters
How to make a FRAME & PANEL Cabinet Door trend R r o u t i n g t e c h n o l o g y A 65 page guide to using profile scribing and raised panel cutters Profile scribing and raised moulding cutters can be
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationMeet the new freud. New Products: Innovations as well as heavy investment in up to date technology in the plants for superior product quality.
Meet the new freud 10 LSB45017X Meet the new freud 1 0.35 PATENTED SYSTEMS Ø450x4.8/3.5x60 Z72 HW n max 4200 RPM 8935 PATENTED SYSTEMS New Products: Innovations as well as heavy investment in up to date
More informationGo-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
More informationTopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
More informationEVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what
More informationUNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationPole Lathe and Shave Horse Design
Pole Lathe and Shave Horse Design These pictures and accompanying words are Copyright Michael Hughes February 2002. They are not to be re-produced, in part or whole, without permission from the author.
More informationEXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationCLEAR-DIVISIONS APERTO
CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the
More information9.8.1.1. General (1) This Section applies to the design and construction of interior and exterior stairs, steps, ramps, railings and guards.
Section 9.8. Stairs, Ramps, Handrails and Guards 9.8.1. Application 9.8.1.1. General (1) This Section applies to the design and construction of interior and exterior stairs, steps, ramps, railings and
More informationNew potential for hand-guided routers
Routing Back 652 Routing Overview Bosch Accessories 11/12 New potential for hand-guided routers Bosch offers a compact, clearly structured range of router bits for a wide range of applications. And this
More informationCedar Cottage Doghouse Plans
Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent
More informationHow to secure your property after a disaster
How to secure your property after a disaster The Red Guide to Recovery HOuse secured properly Board-Up of Windows, Doors and Roof Hole. Lot secured with Perimeter Fencing. Fires, floods, tornadoes, hurricanes,
More informationThese instructions will show you how to install an internal door into a non-loadbearing partition wall. The instructions are split into three parts.
No 8 in the series of 'How to' brochures produced by PlaceMakers, New Zealand How to Frame and Hang a Door These instructions will show you how to install an internal door into a non-loadbearing partition
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More informationHONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationA sophisticated design for a demanding field. prima series
A sophisticated design for a demanding field prima series 2 nd edition 2003 prima compact horizontal interlocked sockets carefully studied A size for all versions with or without fuses. Extends horizontally
More informationRaised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set
Raised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set Congratulations on your purchase of Freud s world class 2 + 2 Raised Panel Bit Set. This revolutionary design combines two small wings
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationWren Kitchens Installation Tips... 3. Carefully check your kitchen delivery... 4. Measuring out and marking up... 5. Fitting the base cabinets...
tra 1 Index Wren Kitchens Installation Tips... 3 Carefully check your kitchen delivery... 4 Measuring out and marking up... 5 Fitting the base cabinets... 6 Fitting the corner cabinets... 7 The 972mm or
More informationDESIGN BY: ARCH. GIUSEPPE INZITARI
DESIGN BY: ARCH. GIUSEPPE INZITARI 218 FOR HIGH THICKNESS FROM 12 TO 17.5 MM - GIUMAX GIUMAX 9500 Page 220 GIUMAX 8500 Page 227 ROLLERS Page 233 GIUMAX 4500 Page 236 GIUMAX 6500 Page 244 FROM 8 TO 12 MM
More informationCERTIFICATE OF APPROVAL No CF 291 SCHOTT UK LIMITED
CERTIFICATE OF APPROVAL No CF 291 This is to certify that, in accordance with TS General Requirements for Certification of Fire Protection Products The undermentioned products of Drummond Road, Stafford.
More informationWERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de
More informationHow you select and where to install me! Kitchen BE CAREFUL OF FOLLOWING PARAMETERS : A- Plumbing space needed (specifically the height).
Environment, recycling, selective collect Today, to convert a house to recycling, a house should have necessary methods and tools. Richelieu, always ahead of practical solutions, offers management and
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationHow To Fit A Portman Door Leaf
Portman Sliding Door Gear Timber/Frames Doors Frameless Glass Doors Top track Portman top tracks are suitable for door leaves of up to 80kg as standard Material is 6063T6 aluminium alloy anodised to 15
More informationIntermat. Hinge technology of the highest order
Intermat Hinge technology of the highest order Intermat snap-on assembly hinge 2 Hinge technology of the highest order Intermat is Hettich s outstanding snap-on assembly hinge. Outstanding, because it
More informationDIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS TheRTAStore.com STEP 1: CLEAR A WORK SPACE Place your RTA cabinet panels on a smooth, scratch resistant surface in a large, open area. (Some people like to
More informationKITCHENS. Tip PAGE 1 FITTING YOUR KITCHEN GUIDE. How to mark out a kitchen. Tools required for installing a kitchen STEP ONE STEP TWO STEP THREE
FITTING YOUR KITCHEN GUIDE How to mark out a kitchen PAGE 1 Before starting on the installation, measure 870mm from the lowest point of the floor and mark a datum line around the room to indicate where
More informationSaferand easierinstallation
EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationDIY CABINET REFACING INSTALLATION GUIDE
DIY CABINET REFACING INSTALLATION GUIDE CABINET REFACING INSTALLATION Are you ready to reface your outdated cabinets? This guide will show you how to install your new Facelifters Cabinet Refacing Products
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationSchluter -KERDI-BOARD Substrate, building panel, bonded waterproofing
Schluter -KERDI-BOARD Substrate, building panel, bonded waterproofing Schluter -KERDI-BOARD The universal substrate for tiles Flat. Level. Plumb. Square. No matter the quality, cost, or extravagance of
More informationSHOP NOTES METAL SHAPER FOR YOUR SHOP
SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
More informationDRAWING INSTRUMENTS AND THEIR USES
Chapter - A DRAWING INSTRUMENTS AND THEIR USES Drawing Instruments are used to prepare neat and accurate Drawings. To a greater extent, the accuracy of the Drawings depend on the quality of instruments
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationMERO Floor Systems - CleanRoom
MERO Floor Systems - CleanRoom Innovative solutions out of one hand Development Access floor Consulting Hollow floor Planning Floor covering and Manufacturing Installation Installation Services Floor systems
More informationRemoving chips is a method for producing plastic threads of small diameters and high batches, which cause frequent failures of thread punches.
Plastic Threads Technical University of Gabrovo Yordanka Atanasova Threads in plastic products can be produced in three ways: a) by direct moulding with thread punch or die; b) by placing a threaded metal
More informationExtraordinary Form. Incomparable Value.
Extraordinary Form. Incomparable Value. Dovetail Grooved Cinnamon Glaze beam Wellington Series: Full overlay birch raised door with mortise & tenon construction Applied moulding and five piece recessed
More informationBuilding an Off-Center Fixture for Turning Pendants
Building an Off-Center Fixture for Turning Pendants Turning a pendant off-center with most available metal pendant chucks means that you will have a significant amount of mass off center, which will limit
More information* Super strength steel 2 precision ground HW cutting edges [Z2] TECHNICAL DETAILS: - Premium quality HWM - 2 radial relief cutting edges [Z2]
olid carbide router cutters 9,5 112 * uper strength steel 2 precision ground HW cutting edges [Z2] HW HWM Z2+1 ORER NO. 3 10 37 9,5 112.030.11 4 10 37 9,5 112.040.11 5 12 39 9,5 112.050.11 6 14 41 9,5
More informationArchitectural Casework 06400-01. 1.01 Description of Work
06400-01 1.01 Description of Work A. Extent of each type of architectural millwork and casework as indicated on drawings. Types of architectural casework shall include both stained and plastic laminated
More informationBUILD A TABLETOP LOOM
BUILD A TABLETOP LOOM From 1" x 2" stock (actual 3/4" x 1"1/2) cut: 4 pieces 15" long 4 pieces 5"1/2 long Use the above to make 2 frames for the front and back of the loom. From 1" x 4" stock (actual 3/4"
More information2.9 WINDOW & DOOR BUCKS
2.9 WINDOW & DOOR BUCKS Bucks provide attachment surfaces for windows and doors while holding back concrete from these openings during concrete placement. Mark the center and edges of openings as you place
More informationTechnical handbook Panel Anchoring System
1 Basic principles of sandwich panels 3 Design conditions 4 Basic placement of anchors and pins 9 Large elements (muliple rows) 10 Small elements (two rows) 10 Turned elements 10 Slender elements 10 Cantilevering
More informationGate Leg Drop Leaf Table Plans
Preparing the table top blanks: Cut and glue enough 3/4 stock to make three panels 40 long by 24 wide (they will be cut to final size at a later time). While the glue dries we will work on the legs. Preparing
More informationTrundle Bed Plans (For Use Under Twin or Full-Size Standard Length Beds)
Bunk Beds Unlimited Trundle Bed Plans (For Use Under Twin or Full-Size Standard Length Beds) On the following pages we have included all of the necessary drawings and requirements for a Modified twin-size
More informationGENERAL SHIELDING REQUIREMENTS FOR DIAGNOSTIC X-RAY FACILITIES. Major Medical (Radio/Fluoro/CT/Cardiac/Chiropractic)
GENERAL SHIELDING REQUIREMENTS FOR DIAGNOSTIC X-RAY FACILITIES 1. PROTECTIVE SCREENS (a) Major Medical (Radio/Fluoro/CT/Cardiac/Chiropractic) Typically, 15 kg m -2 (1.3 mm) sheet lead or its shielding
More informationLadder Shelf Plans Final dimensions: 25 L x 21 W x 72 H
Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H Copyright 2011. MLCS Woodworking. Page 1 Router bits and supplies needed: 3/8 Rabbeting bit (#10691) 1 Bottom Cleaning bit (#7941) Top and Bottom
More informationSUPER SHED. Indoor shelter for your outdoor tools.
SUPER SHED Indoor shelter for your outdoor tools. Not everyone needs a garden shed. But, if you've no more space on your garage wall for that new leaf rake, if you can't find your potting trowel because
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationMaking Wooden Hinges
Making Wooden Hinges By Alex Reid - www.mokkou.jp Materials and tools used - 3.2mm straight router bit - 1/8 round-over router bit - Flush-cut straight bit (with bearing on bottom) - Finger-joint jig -
More informationHuwilift DUO, Huwilift DUO Forte Seite 4 3. Huwilift MAXI. Huwilift MAXI UP. Huwilift Senso, Huwilift E-Senso Page 4 17
INDEX Lifters Huwilift DUO, Huwilift DUO Forte Seite 4 3 Classic solution for lift-up flaps. Huwilift MAXI Page 4 7 Quickly installed for a gentle lift. Huwilift MAXI UP Page 4 13 Lifts and lowers chest
More informationInterior Pocket Door System. A hiding gliding sliding door
Interior Pocket Door System hiding gliding sliding door Introduction good fit for you & the room too Our range of Whatever the style or budget we ve got a choice of 3 sliding pocket door systems that will
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationInstalling Window and Door Mouldings
Installing Window and Door Mouldings About Window and Door Mouldings The trim around windows and doors greatly influences the look and style of your interior. They also bridge the gaps and cover spaces
More informationCircular saw benches Safe working practices
Circular saw benches Safe working practices HSE information sheet Introduction This information sheet is one of a series produced by HSE s manufacturing sector. It gives practical guidance on safe working
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationSolid Wood Worktops Installation and Aftercare Instructions
Solid Wood Worktops Installation and Aftercare Instructions IMPORTANT NOTE: Please note our worktops have an A and a B side; it is important to identify these prior to making any cuts or other amendments.
More informationProduct Guide SaraDrill
Product Guide SaraDrill SARADRILL / A QUICK GUIDE Drilling from solid - a proven technology to drill large diameter holes on low horse power machines. Drilling from 49mm to 270mm diameter holes from solid
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More information2. This is a close up of a typical area where the rocker is rusted out leaving holes under where the rocker moulding would be..
ROCKER PANELS 55,56,57 CHEVY REPLACEMENT Do not throw away any pieces when you first remove them. There are many supports that are not reproduced and will need to be used again. When disassembling try
More informationCONTROL EVOLUTION STANDARD COMPACT. Versatile in use. Perfect sawing and grooving with Striebig.
CONTROL EVOLUTION TANDARD COMPACT COMPOITE PANEL Versatile in use. Perfect sawing and grooving with triebig. Creating ustainable Values Confidence, ability, continuity We are committed to vertical panel
More informationCutting and stripping tools
Cutting and stripping tools Introduction 2 Cutting and stripping tool 0.02-10 mm² (16 mm²) 3 Stripping tool for cables Ø 2.5-40 mm 4 Tools for cutting and stripping of conductors 0.5-6 mm² and for cutting
More informationBLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationGear PEPSI CAN STOVE INSTRUCTIONS
Gear PEPSI CAN STOVE INSTRUCTIONS [NOTE: Updated Instructions are now available. The new stove is less likely to develop flame leaks and the fuel/air mixture is improved. Instructions for a simmer ring
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationHere is your set of Detailed Plans from Copyright 2004 All Rights Reserved
Here is your set of Detailed Plans from Copyright 2004 All Rights Reserved Materials for the House Here is the list of materials you will need to construct the basic house then to cover it with roofing
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationCutting and Shearing die design Cutting die design
Manufacturing Processes 2 Dr. Alaa Hasan Ali Cutting and Shearing die design Cutting die design A stamping die is a special, one-of-a-kind precision tool that cuts and forms sheet metal into a desired
More informationThe tablesaw may be your shop s most valuable cutting. Crosscut Sleds. Foolproof. Innovative approach guarantees perfect results
Foolproof Crosscut Sleds Innovative approach guarantees perfect results B Y A L A N T U R N E R The tablesaw may be your shop s most valuable cutting tool, but for precise, repeatable crosscuts it needs
More informationIndustrial Knives and Blades
Industrial Knives and Blades Hyde Tools makes custom-tailored tools of the trade that professionals in many fields use to work quickly and precisely. There are utility knives and hand knives for flooring
More informationPRESSBLOWER Injection Blow Moulders. Pressblower DSE 80 Pressblower DSE 150 Pressblower DSE 260
PRESSBLOWER Injection Blow Moulders Pressblower DSE 80 Pressblower DSE 150 Pressblower DSE 260 Tasks Worldwide the Pressblower Injection Blow Moulding technique of Ossberger is renowned and well-established
More informationMilling Milling milling cutter milling machines 1
Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationUSER MANUAL LOGOSOL PH260 USER MANUAL IN ORIGINAL FORMAT. ARTICLE NO: 0458-395-0170
USER MANUAL USER MANUAL IN ORIGINAL FORMAT. ARTICLE NO: 0458-395-0170 LOGOSOL PH260 Read through the user manual carefully and make sure you understand its contents before you use the planer/moulder. This
More informationSBF ScreenMax. Bending
SBF ScreenMax Bending Glaston is your glass processing technology One-Stop-Partner providing Bavelloni, Tamglass and Albat + Wirsam products and services. Tamglass Comprehensive expertise in safety glass
More informationLenntech. 1000 psi End port pressure vessels 2.5. User s Guide to: Phoenix Vessel Technology Limited. Model number: 1503
1 User s Guide to: Phoenix Vessel Technology Limited 1000 psi End port pressure vessels 2.5. Model number: 1503 Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Phoenix
More informationCI/SfB. (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems
Uniclass L4181 EPIC D181 CI/SfB (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems Interior Sliding Door Gears FOR CUPBOARDS, WARDROBES, INTERIOR SLIDING AND FOLDING DOORS A comprehensive range of
More informationCube, strip & slice cutting machine KUJ V. High performance dicer designed and constructed for the food processing industry
Cube, strip & slice cutting machine KUJ V High performance dicer designed and constructed for the food processing industry Cube, strip and slice cutting machine KUJ V Precise cutting for the finest dicing,
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationHOW TO INSTALL A BEAUTIFUL NEW KITCHEN
HOW TO INSTALL A BEAUTIFUL NEW KITCHEN Easy to follow step-by-step kitchen cabinet installation TOOL AND MATERIAL LIST Hammer Pry bar Screwdriver Phillips Flathead Level Tape measure Pencil Straight edge
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More information